1 | Laptop Power Up 2 | Headset INSTRUCTIONS • T

1 | Laptop Power Up 2 | Headset INSTRUCTIONS • T
• Select the HP LaserJet Pro MFP M127fn
and click Next (Address may be different
than shown.)
• After successfully adding the printer,
click “Print a test page” to confirm the
printer is working.
• If prompted to install a printer driver,
scroll down in the Manufactuers column
and select Hewlett Packard. In the
Printers column, select the “HP LaserJet
Pro MFP M127-M128 PCLmS” driver
and click Next.
• Find Dell laptop box. Your UserName
and default Password are printed on the
white label that is on your laptop box.
Remove laptop, power cable and power
adapter from Dell box.
• Place laptop in desired location close to
an electrical outlet. Connect the end of
the power cable to matching port on the
power adapter.
• Remove the headset from white box
and open. Connect the USB end of the
headset to the USB port on left side of
the laptop.
• Insert the rounded end of the power
adapter cable into the laptop’s power port.
Toll-Free Service Hours
We offer toll-free service desk support for
your convenience. Hours are Monday through
Friday, 7 a.m. - 10 p.m. and Saturday, 9 a.m. 3 p.m. except on designated holidays.
Call 1-844-50-AGORA (1-844-502-4672)
• Click Close on the test page window.
• Click Finish - If a test page does not
successfully print, proceed to start at the
beginning of the printer configuration
process and install the printer again.
Agora-Instructions-05212015.indd 1
2 | Headset
TO L L - F R E E S U P P O RT 1 - 8 4 4 - 5 0 - A G O R A
• When prompted to name your printer,
you can leave the default name as shown
or enter a different name. Click Next.
1 | Laptop Power Up
•
• Click Add Printer. At prompt, click Add
a network, wireless or Bluetooth.
• If prompted, to choose which driver you
would like to use, select “Use the driver
that is currently installed for this printer
(recommended)” and click Next.
• Insert the pronged end of the power cable
into an electrical outlet. Open the laptop
and press the power button, located in the
upper right corner of the keyboard.
INSTRUCTIONS
4 | Printer Config cont’d
Powered By
myAgora: Personalized Learning —
Today, Tomorrow, Together!
5/26/2015 2:11:56 PM
• Remove printer box from shipping box.
• Connect the other end of the network
cable to a numbered port on your home
router (not Included).
• Remove the printer, power cable and
network cable from the box.
• Turn the printer on.
• Place printer in desired location close to
your home router and a power outlet.
4 | Printer Configuration
• Attach paper tray to printer by pressing
into slot until it clicks.
• Remove toner cartridge.
• Log in to Windows with your student
UserName and default Password.
• Connect to your home network via
wireless or wired network connection.
• Connect the female end of the power
cable to the printer.
• Click the Start icon
and on the right
menu click Devices and Printers.
• Flip the top paper guide out and down.
•
• Pull the orange tab until the film has
been removed from the cartridge.
TO L L - F R E E S U P P O RT 1 - 8 4 4 - 5 0 - A G O R A
3 | Printer Setup
• Insert the pronged end of the power
cable into an electrical outlet.
• Open main printer lid.
INSTRUCTIONS
• Insert the cartridge back in to the printer.
• Close both the internal and main printer
lids.
Powered By
• Connect one end of the network cable to
your printer.
Agora-Instructions-05212015.indd 2
• Open internal printer lid.
• Load standard letter-size (8.5x11 inch)
paper into the printer paper tray.
myAgora: Personalized Learning —
Today, Tomorrow, Together!
5/26/2015 2:12:04 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising