Sell Sheet - Singer Photographic

Sell Sheet - Singer Photographic
Photo: © Adrien Broom
MAKE IT POSSIBLE™
PocketWizard wireless photo control systems have offered
reliable camera and flash triggering for nearly two decades,
enabling the world’s leading photographers to capture
images that defy limitations. Now, PocketWizard has
developed an entirely new platform called ControlTL® that
gives photographers total wireless control over their remote
Speedlite flashes, and power control capabilities with select
studio flash systems.
The PowerST4 Receiver enables remote power control of Elinchrom RX
flashes using PocketWizard ControlTL technology. With a MiniTT1®
Transmitter or FlexTT5® Transceiver on your camera and a PowerST4
plugged into your Elinchrom RX flash, you can now adjust the flash power
settings directly from the camera position. Add the AC3 ZoneController and
you can control three different zones of lights in 1/3-stop increments with
up to a six-stop range. Utilize PocketWizard’s unique features such
as HyperSync and Optimized Rear Curtain Sync for maximum control of
your lighting.
KEY BENEFITS for PHOTOGRAPHERS
•Control
your flash power settings directly from the camera.
•Change ISO or aperture and the lights automatically adjust
their power settings with PowerTracking.
•Add
the AC3 ZoneController to control up to three zones
of light independently.
•Use
HyperSync to increase sync speed and Optimized Rear
Curtain Sync to create natural looking movement.
•Works
with Plus II and MultiMAX.
www.PocketWizard.com
Features & Functions:
Control the Light ™
PocketWizard’s new firmware platform taps into the full potential of your camera
and flash system enabling an entirely new level of remote flash capability
through our proven radio communications. ControlTL firmware is configurable
and upgradeable for “future-proof” continuous improvement.
Manual Power Control
When the PowerST4 is paired with either the MiniTT1 or FlexTT5 on camera,
you can adjust the power settings of your Elinchrom RX lights from the camera’s
position either with the Flash Exposure Compensation dial or add the AC3
ZoneController for three zones of power control.
ZoneControl
Use either the AC3 ZoneController or a MultiMAX radio to control up to three
zones of light with as many lights in each zone as you want. Use the A-B-C zone
switch on the PowerST4 to assign the zone.
PowerTracking
In Auto Mode, change ISO, aperture, or FEC and the lights automatically adjust
their compensating power setting with PocketWizard PowerTracking. Set your
AC3 ZoneController to manual and PowerTracking is turned off for absolute
manual control. PowerTracking can be customized via the PocketWizard Utility.
HyperSync™
HyperSync allows photographers to achieve faster X-sync speeds, all the way up
to 1/8000 second*, with full power flash. Now you can cut the ambient light and
use wide-open apertures outdoors in bright sunlight. That extra speed can also
freeze action, whether shooting models or athletes in motion.
*Camera and flash model dependent.
Programmable and Upgradeable
Use the PocketWizard Utility with the PowerST4’s USB port to program
the receiver to any PocketWizard channel and zone. You can also program
your initial power settings, modeling light settings and beeper settings
using the Utility. The PowerST4 can be easily upgraded whenever updates
and feature enhancements are available.
Channels / Learn Mode
The PowerST4 can be programmed as needed with up to 20 ControlTL channels
for Manual Power Control, or 32 standard channels for simple triggering (FCC
model). Channels can be configured with the PocketWizard Utility, the Learn
function from another PocketWizard radio, or the reset function to configure back
to factory settings.
Reverse Compatible
The PowerST4 Receiver operates on the same channels as all other
PocketWizard radios and will work with any PocketWizard radio you may
already have.
Low Profile Design
The PowerST4 is tiny and simply plugs into the remote socket on an
Elinchrom RX flash.
Note: Ranger RX requires EL-19374 EL Skyport Transceiver RX Adapter.
No Batteries Required:
The PowerST4 gets its power from the flash.
Specifications:
Frequency: CE
US FCC / IC
433.42 - 434.42 MHz
340.00 - 354.00 MHz
Channels: CE US FCC / IC 35 Channels over 5 Frequencies
52 Channels over 26 Frequencies
Antenna: 2.7” (6.9 cm) rubberized
Compatibility:
PocketWizard transmitting radio & a compatible Elinchrom RX flash:
Style 300RX, 600RX, 1200RX; Digital 1200RX & 2400RX; Ranger RX, Ranger RX Speed (S), Ranger RX Speed AS Note: Ranger models require Elinchrom’s EL 19374 - EL-Skyport Transceiver RX Adapter
Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Mounting: Five-pin remote socket
Zone Select switch: A-B-C
Status indicator: LED: Green, Amber, Red status indications
USB: USB Compliant 2.0, Mini-B Connector
Operating temperature: Above -15° C (5° F) and below 50° C (120° F)
Storage temperature: Above -30° C (-22° F) and below 85° C (185° F)
Construction: High impact plastic, rubberize antenna
Power: Receives power from attached flash
Dimensions: 9.2 cm (3.6”) long x 5.5 cm (2.2”) wide x 2.5 cm (1”) tall
Weight: 21.83 grams (.77 oz)
Requirements: Must be used in conjunction with a MiniTT1 or FlexTT5 on camera
for power control capability. May be paired with any PocketWizard
transmitter or transceiver for simple triggering.
Note: Information subject to change. Visit pocketwizard.com for the most up to date product information.
www.PocketWizard.com
info@pocketwizard.com
MAKE IT POSSIBLE™
v1.0 - October 2010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising