Element™ Control Console ETC

Element™ Control Console ETC
Element™ Control Console
ETC
Eos® Series
G E N E R A L I N F O R M AT I O N
O R D E R I N G I N F O R M AT I O N
Designed for venues using primarily conventional lighting, the
Element control console provides the powerful features of the
Eos system in an economical and simplified package. In addition
to keypad commands, True LTP Channel Faders provide hands-on
control of intensity and can be used to set manual levels and edit
recorded cues and submasters. On Demand Moving Light Controls
are available to facilitate using conventional accessories like moving
mirror heads, color scrollers or gobo rotators, or to make controlling
small numbers of moving lights simple and direct.
Element
MODEL
DESCRIPTION
LMNT-40-250
Element Console, 40 Faders, 250 Channels
LMNT-40-500
Element Console, 40 Faders, 500 Channels
LMNT-60-250
Element Console, 60 Faders, 250 Channels
LMNT-60-500
Element Console, 60 Faders, 500 Channels
*
ETCNet2 or Net3 are distributed using Net3 Gateways, which provide DMX, MIDI/
SMPTE Time Code and switch-closure functionality. MIDI In/Out is also available
locally at the console.
APPLICATIONS
• Theatre
• Television Studios
• Houses of Worship
• Corporate Theatre
• Exhibits
• Special Events
• Touring
FEATURES
• 1024 Outputs
• 250 or 500 Channels
• 40 or 60 Fader versions, pageable as channel or
submaster control
• Master Playback pair with 60mm faders, GO, STOP/GO BACK
• Intensity, Focus, Color and Beam Palettes
• Stepped, Relative and Absolute Effects
• Hue+Saturation Color Picker and Gel Picker for LED, CMY
color mixing
• ETCNet2, Net3, ArtNet and Avab UDP network protocols
• Show import via ASCII from Obsession, Express, Expression,
Emphasis, Strand 300/500
• I/O: local DMX512-A (2 output ports), MIDI In/Out, Ethernet
• Distributed DMX, MIDI, SMPTE and contact closure via
Net3 Gateways
Two universes of DMX512-A output are available at the console via 5-pin XLR, or
these universes may be distributed with ETCNet2 DMX Nodes or Net3 DMX/RDM
Gateways. Gateways and network equipment must be purchased separately.
Element Accessories
1 of 4
MODEL
DESCRIPTION
Net3 RFR
Net3 Radio Focus Remote
Net3 RVI
Net3 Remote Video Interface
M213
19” LCD touch screen monitor (1280x1024)
Element™ Control Console
ETC
Eos® Series
S P E C I F I C AT I O N S
S P E C I F I C AT I O N S
SYSTEM CAPACITY
• 1024 Outputs/Parameters
• 250 or 500 Channels
• 10,000 Cues
• 1 Cue List
• 4 x 1000 Palettes (Intensity, Focus, Color, Beam)
• 1000 Groups
• 1000 Effects (relative, absolute or step)
• 1000 Macros
• Supports two external DVI monitors or one VGA monitor at
1280x1024 resolution, with optional touchscreen control
• Hard Disk
• USB ports for flash drives, pointing devices, keyboards
DISPLAY FUNCTIONS
• All show data may be viewed on one or two external
monitors. Views may be expanded across both from easily
accessed front panel controls.
• The Central Information Area accesses:
- Browser
- File Management
- System Setup
- Network Configuration
- Show Data Utilities
- Printing
- Record Target Lists
- Patch functions
- Help
- Hue and Saturation Color Picker
- On Demand Moving Light Controls
- Electronic alpha keyboard
- Command Line
- Selected Cue
- Error messages and advisories
• Channel Displays
- Live channel summary or table view
- Blind cue, palette and submaster views, in list, channel,
table and spreadsheet formats
- User configurable to show required parameters and/or
parameter categories (IFCB)
- Flexi-channel to determine which channels to display
- Zoom allows user to define how many channels are viewed
- Color coded intensity levels indicate direction of move
- Color coded non-intensity levels indicate change from
previous state
- Graphic differentiation of moving lights, single parameter
devices, unpatched channels and deleted channels
• Patch Views
- Patch by channel
- Patch by address
- Assign proportional patch value, curve, preheat value
for intensity
- Swap pan and tilt
- Invert pan and tilt
- Custom fixture editor
• Playback Status Display
- Graphic representation of cue list status, past and
future cues
• Cue List Index
• Effect Editor
• Group Editor
• Park Display
• Fader Display
- Isolates display to active output by fader contribution
• Dimmer Monitoring
PLAYBACK CONTROLS
• Master Playback crossfade pair with two 60mm
potentiometers, Go, Stop/Back and Load buttons
• Grand Master with Blackout
• Playback fader controls include:
- Timing Disable
- Off
- Release
- Manual Override
- Rate
• A maximum of 300 submasters (additive or inhibitive) via
integral faders
MOVING LIGHT CONTROLS
• On Demand Moving Light controls include labeling and
current parameter value on connected display monitor
• Flip and Home functions
• Parameters selectable on screen for mouse-based control or
command line actions
2 of 4
Element™ Control Console
ETC
Eos® Series
S P E C I F I C AT I O N S
S P E C I F I C AT I O N S
-
Auto-mark
Block at cue or parameter level
Follow times
Out of sequence link
Loop functions
Preheat enable
20 part multi-part cues with default part assignment
Cue level rate override
Up to 99 decimal cues between each two whole
numbered cues
- Execute List
· Triggers macros with delay
· Show control triggers
· Analog triggers
- Update and Update Trace functions
- Undo record and delete
• Submasters
- Additive, inhibitive or effect submasters
- Bump button timing to fade up, dwell and fade out
- Exclusive and lock modes
- Faders as progress controller or intensity master
- Bump button to mark NPs
- Independent status
• Curves
- Assignable in patch to modify dimmer output ramp
- Assignable at cue or cue part level to modify intensity
crossfade profle or non-intensity parameter ramping
INTERFACES
• 2 DMX-512 Ports (RDM ready)
• Ethernet (ETCNet2, Net3,Artnet and Avab UDP protocols)
• Contact Closure triggers via D-Sub connector
• 2 DVI video connectors support two external DVI displays
(1280x1024) with optional touch screen control
• 1 - VGA connector
• USB Multi-purpose (minimum 5 ports)
• Phone Remote
• Net 3 Radio Focus Remote
• MIDI In/Out (Timecode, Show Control)
• Additional MIDI/SMPTE Timecode, Show Control through
Net3 Gateway
• Additional contact closure (12 analog inputs, 12 SPDT contact
outputs, RS-232) through Net3 Gateway
ELECTRICAL
• AC input (100-240V at 50/60 Hz)
• 2 amps at 120V or 1 amp at 240V maximum power
consumption
MANUAL CONTROL
• Channel selection from keypad
• Lists constructed with +, -, thru
• Intensity set with level wheel, keypad, “full” and “out”
• True LTP channel faders for direct hands-on intensity control
• Ordered groups
• Offset, including even, odd, random, reverse
• Fan
• Sneak
• Remainder Dim and restore
• Home
• Home by parameter, parameter category or all
non-intensity parameters
• Park at level
• Scaled park for temporary percentage adjustment
• Recall from and Copy to commands
• About provides detailed view of selected channels or
record targets
• Undo manual control, record, update and delete operations
• Lamp controls to strike, douse, calibrate fixtures
PROGRAMMING FEATURES
• Channel Functions
- Non Intensity parameters set via numeric entry or
On Demand Moving Light Controls
- Color matching to gel selector or Hue/Saturation
color picker
• Palette Functions
- Record and Update functions
- Toggle display to absolute data
- Up to 99 decimal values may be inserted between any two
whole numbers
- Selective store to refine contents of record targets
• Effects
- Create live or blind
- Pattern based relative dynamic effects
- Absolute effects
- Step effects
- Cycle time, trail and grouping determine channel
distribution and behavior when moving through effect
- Duration of infinite, a specific amount of time or number
of passes through pattern
- Effect attributes to modify basic behavior
- Cue Level Overrides to modify size, rate and form
- Multi-part effects easily synchronize parameter activity
- Entry mode determines how parameters enter effects
- Exit mode determines how parameters depart effects
• Cue Recording
- Record tracking or cue-only
- Autoplayback recorded cues
3 of 4
Element™ Control Console
ETC
Eos® Series
PHYSICAL
Element Console Dimensions*
MODEL
Element
Console
HEIGHT
Element Console Weights*
WIDTH
DEPTH
inches
mm
inches
mm
inches
mm
5.1
130
32.9
836
17.9
455
MODEL
Element Console
WEIGHT
SHIPPING WEIGHT
lbs
kgs
lbs
kgs
30
13.6
37.5
17
*Weights and dimensions typical
17.9”
455 mm
32.9”
836 mm
5.1”
130 mm
Corporate Headquarters • 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA • Tel +1 608 831 4116 • Fax +1 608 836 1736
London, UK • Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK • Tel +44 (0)20 8896 1000 • Fax +44 (0)20 8896 2000
Rome, IT • Via Ennio Quirino Visconti, 11, 00193 Rome, Italy • Tel +39 (06) 32 111 683 • Fax +44 (0) 20 8752 8486
Holzkirchen, DE • Ohmstrasse 3, 83607 Holzkirchen, Germany • Tel +49 (80 24) 47 00-0 • Fax +49 (80 24) 47 00-3 00
Hong Kong • Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong • Tel +852 2799 1220 • Fax +852 2799 9325
Web • www.etcconnect.com • Copyright©2009 ETC. All Rights Reserved. All product information and specifications subject to change. 4330L1003 Rev A Printed in USA 06/09
4 of 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising