IC6-1062/00 - Community Loudspeakers

IC6-1062/00 - Community Loudspeakers
I SERIES
Compact 600
IC6-1062/00
HIGH OUTPUT 6.5-INCH TWO-WAY
INSTALLATION LOUDSPEAKER
FEATURES
• Excellent LF extension and output in a very small enclosure
• Exceptional fidelity with elegant I SERIES aesthetics
• Very wide coverage pattern
• Low impedance (8 ohm) or 70V/100V models available
• Low profile U-Bracket mounting option, compatible with most third party wall and ceiling brackets.
14.29"
(363mm)
TECHNICAL SPECIFICATIONS1
with grille off
APPLICATIONS
MAIN PA or DISTRIBUTED
Restaurants · Presentation Suites · Auditoriums
Retail Spaces · Smaller Houses of Worship · Stadiums
Theme Parks · Cruise Ships · Entrance Halls
FILL or DELAY
Houses of Worship · Auditoriums · Arenas · Stadiums
Theaters · Themed Entertainment · Under Balcony
Stage Lip Fill
DESCRIPTION
I SERIES Compact 600 loudspeakers provide
excellent acoustic performance, flexibility and
elegant aesthetics for a diverse range of applications
in today's performance venues. Designed to support
the goals of systems integrators and consultants in
need of very compact loudspeakers with exceptional
near field fidelity for foreground or background music
applications and articulate voice projection with
very high output capabilities for fill and distributed
applications. I SERIES Compact loudspeakers are
engineered to be used alone or integrated into
arrays along with I SERIES Point Source (IP) or
Subwoofer (IS) models using the comprehensive
selection of available BalancePoint™ Flyware
modular array brackets.
The IC6-1062/00 occupies a very small footprint,
yet provides LF extension and output that greatly
exceeds its stature thanks to a high sensitivity, long
excursion 6.5" woofer and precisely engineered
extended bass reflex port. Smooth, extended high
frequency is provided by a direct radiating 1" damped
fabric dome diaphragm on a shallow horn with a
Ferrofluid and heatsink-cooled dual neodymium
motor. To ensure a long life and maintenance-free
performance in nearly all conditions, the HF is also
protected by Community's DYNA-TECH™ dual-stage
protection circuit. Additionally, 8 ohm or 70V/100V
models expand application flexibility both indoors
and out.
Operating Mode
Low Impedance or 70V/100V models
Operating Environment
Indoor or Weather-Resistant Outdoor
Operating Range2
56 Hz to 18.5 kHz
Nominal Beamwidth (H x V)
100° x 100°
Transducers
LF 1 x 6.5" (165mm) ferrite driver, 1.5" (37mm) voice coil
HF 1 x 1" (25mm) direct radiating damped fabric dome diaphragm,
ferrofluid and heatsink-cooled dual-neodymium motor
Continuous Power Handling3
@ Nominal Impedance
Passive*
35V
150W @ 8 ohms (600W peak)
70V
100W
50W
25W
12.5W
@ 70.7V
50 Ω
100 Ω
200 Ω
400 Ω
100V
100W
50W
25W
Nominal Sensitivity4
@ 1W/1m
92 dB
@ 2.83V
92 dB
Nominal Maximum SPL 5
(Whole Space)
Peak
120 dB
Continuous
114 dB
@ 1W/1m
91 dB
@ 2.83V
91 dB
Equalized Maximum SPL7
Peak
119 dB
Continuous
113 dB
Recommended Amplifiers
150W - 300W @ 8 ohms, (35V - 49V)
Autoformer Taps/Impedance
IC6-1062T00 | IC6-1062WT00
Equalized Sensitivity6
@ 100V
100 Ω
200 Ω
400 Ω
PHYSICAL
Input Connection
(1) Screw terminal block (5-position)
Mounting Points
(9) M6 threaded rigging points
Environmental
Outdoor: IP55W per IEC 60529, MIL-STD-810G
Weight
Indoor
16.0 lbs (7.3 kg) loudspeaker
20.0 lbs (9.1 kg) loudspeaker
Dimensions H x W x D
14.29" x 8.00" x 8.94" (363 x 203 x 227 mm)
Finish
Refer to the Technical Drawing
IC6-1062/00 | IC6-1062WR00
IC6-1062T00 | IC6-1062WT00
Weather-Resistant
12.6 lbs (5.7 kg) loudspeaker
16.6 lbs (7.5 kg) loudspeaker
OPTIONS
Accessory
IUB-1062 U-Bracket - color matched to enclosure
Various third party wall, ceiling and pan/tilt mounts
(refer to IC6 IUB/IVY manual for models)
Configure-to-Order (CTO)
Custom color; custom cable length for weather-resistant models
*Rated continuous maximum input voltage at passive loudspeaker input may be higher than for directly connected transducers due to losses in the passive
crossover. Voltages applied to the transducer terminals through the passive crossover shall always be the same or lower than the rated continuous voltage
for each device.
Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.
I SERIES Compact 600
IC6-1062/00
HIGH OUTPUT 6.5-INCH TWO-WAY
INSTALLATION LOUDSPEAKER
HalfSpace_Proc
Half-Space
Full Range
110
110
100
100
90
90
80
80
70
70
10
Horizontal
HORIZONTAL OFF-AXISOff-Axis
RESPONSE
(dB)10
20
100
100
Series1
Mag
[dB] (40°)
Half-Space
System_Proc
Amplitude (dB SPL)
Amplitude (dB SPL)
8
AXIALFrequency
PROCESSED
(dB)(Axially
ResponseRESPONSE
Component/System
Processed)
1000
1000
Frequency(Hz)
(Hz)
Frequency
10000
10000
110
110
100
100
90
90
80
80
70
70
10
20
Amplitude (dB SPL)
Half-Space
Passive
110
110
100
100
100
90
90
90
90
80
80
80
80
100
70
70
10
20
100
1000
1000
100
10000
Mag [dB] (40°)
Half-Space
0°
100
100
10
20
10
1
10
20
1000
100
100
Mag [dB] (20°)
Mag [dB] (80°)
80°
60°
100
100
10000
10000
1000
1000
Frequency (Hz)
Off-Axis Vertical
(down) (dB)10
VERTICAL OFF-AXIS DOWN
RESPONSE
Half Space
Mag [dB] (40°)
Min Z 100 Hz ‐ 16000 Hz = 6.9 Ohms @ 290 Hz
10
1
Mag [dB] (60°)
20°
40°
70
70
10000
IMPEDANCE (Ohms)
Passive
10000
10000
1000
1000
Frequency
(Hz)
Frequency (Hz)
Frequency
(Hz)
Frequency
(Hz)
Impedance
Mag [dB] (20°)
(80°)
60° Mag [dB]
80°
Space
Mag [dB] (0°) (dB)10
VERTICALHalfOFF-AXIS
UP RESPONSE
Frequency Response Passive Component, System & HalfSpace
110
100
100
Mag [dB] (60°)
20°
40°
Off-Axis Vertical (up)
AXIAL SENSITIVITY (dB SPL)9
110
Mag [dB] (0°)
0°
1000
Frequency (Hz)
10000
110
110
100
100
90
90
80
80
70
70
10000
10
Half-Space
20
0°
100
100
Mag [dB] (0°)
Mag [dB] (60°)
20°
40°
60°
Mag [dB] (20°)
Mag [dB] (80°)
80°
10000
10000
1000
1000
Frequency (Hz)
Minimum Impedance: 6.9 ohms @ 290 Hz
BEAMWIDTH (Degrees)12
DIRECTIVITY INDEX (dB)11
Beamwidth (Degrees)
Directivity Index
40
40
30
30
20
10
10
0
0
10
20
100
100
1000
Frequency (Hz)
1000
10000
10000
BeamH
Vertical
BeamV
100
100
20
Horizontal
360
10
10
10
20
100
100
Frequency (Hz)
1000
1000
10000
10000
I SERIES Compact 600
IC6-1062/00
HIGH OUTPUT 6.5-INCH TWO-WAY
INSTALLATION LOUDSPEAKER
(30dB Scale, 6dB per major division)
HORIZONTAL POLAR DATA
90° left
135°
-6
45°
0°
front
180°
back
90° left
— 100 Hz
— 125 Hz
— 160 Hz
— 200 Hz
135°
0°
front
45°
0°
front
180°
back
135°
45°
-90° right
-45°
90° left
— 4000 Hz
— 5000 Hz
— 6300 Hz
— 8000 Hz
135°
-6
45°
— 10000 Hz
— 12500 Hz
— 16000 Hz
0°
front
180°
back
-45°
-135°
— 630 Hz
— 800 Hz
— 1000 Hz
— 1250 Hz
0°
front
-135°
0°
front
180°
back
-45°
-135°
-6
45°
-90° right
90° left
— 1600 Hz
— 2000 Hz
— 2500 Hz
— 3150 Hz
-6
180°
back
-90° right
90° left
-6
135°
-45°
-135°
-90° right
135°
45°
180°
back
-45°
-135°
-6
90° left
— 250 Hz
— 315 Hz
— 400 Hz
— 500 Hz
-45°
-135°
-90° right
-90° right
VERTICAL POLAR DATA
90° up
135°
-6
45°
0°
front
180°
back
90° up
— 100 Hz
— 125 Hz
— 160 Hz
— 200 Hz
135°
0°
front
45°
0°
front
180°
back
-45°
-135°
-90° down
135°
-6
45°
-45°
-90° down
— 630 Hz
— 800 Hz
— 1000 Hz
— 1250 Hz
0°
front
-45°
-135°
90° up
— 4000 Hz
— 5000 Hz
— 6300 Hz
— 8000 Hz
0°
front
180°
back
-135°
45°
-90° down
90° up
— 1600 Hz
— 2000 Hz
— 2500 Hz
— 3150 Hz
-6
180°
back
-90° down
90° up
-6
135°
-45°
-135°
-90° down
135°
45°
180°
back
-45°
-135°
-6
90° up
— 250 Hz
— 315 Hz
— 400 Hz
— 500 Hz
135°
-6
45°
— 10000 Hz
— 12500 Hz
— 16000 Hz
0°
front
180°
back
-45°
-135°
-90° down
7
6
5
TOP/BOTTOM
30°
8.94" [227.1]
3.78" [96.0]
8.00" [203.2]
1. SYMBOL INDICATES COG.
2. SYMBOL INDICATES MOUNTING
POINT, M6 THREADED HOLE.
3. WEIGHT:
LOUDSPEAKER ONLY: 16LBS. (7.3KG).
NOTES:
FRONT
SIDES
5
2.00" [50.8]
REV
4
DESCRIPTION
REVISIONS
5.64" [143.2]
TSC
1.73" [44.0]
CL
CL
3
DATE
3.25" [82.5]
INPUT
DIMENSIONS ACROSS CENTERLINES
TO BE SYMMETRICAL
3
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
ALL DIMENSIONS IN in/mm U.O.S.
TSC = THEORETICAL SHARP CORNER
NONE
IC6-1062-2D
I SERIES IC6-1062
SHEET
0
1 OF 1
REV
www.communitypro.com
COMMUNITY PROFESSIONAL LOUDSPEAKERS
333 E FIFTH ST. CHESTER, PA 19013-4511 USA
TEL: (610)876-3400 FAX: (610)874-0190
1
2
1
THIS DRAWING HAS BEEN FURNISHED BY COMMUNITY LIGHT & SOUND, INC.
THE INFORMATION AND KNOW-HOW THEREON MAY NOT BE USED NOR THE
DRAWING REPRODUCED WITHOUT THE WRITTEN PERMISSION OF COMMUNITY.
ALL REPRODUCTIONS WHOLE OR IN PART, INCLUDING VENDOR'S SHOP
DRAWINGS SHALL BEAR OR REFER TO THIS STAMP.
SCALE
DWG NO.
DRAWING TITLE
4.25" [108.0]
1.83" [46.6]
2
Outdoor Models:
Grille: Marine grade aluminum with zinc-rich duallayer powder-coat, featuring hydrophobic treatment on
acoustically transparent woven black fabric backing.
Enclosure / Finish: 15mm PolyGlas™, Grey (RAL#7038),
heavily textured industrial-grade exterior-rated coating.
TOLERANCES ON ALL DIMENSIONS
UNLESS OTHERWISE NOTED TO BE:
ANGLES: ±.5°
DECIMALS: ±.03"
METRIC: ±0.5mm
BACK
5.25" [133.4] NOT TO SCALE
1.22" [31.1]
5.45" [138.4]
8.29" [210.7]
2.13" [54.0]
4
*Note: The transformer and outdoor model drawings are available at communitypro.com
On the WR/WT models the input connection differs and the units weigh less than their respective indoor models
A
B
C
GRILLE PARTIALLY
SHOWN
14.29" [363.1]
6
Indoor Models:
Grille: Powder-coated perforated steel backed with
color-matched acoustically transparent woven fabric.
Black (RAL#9005) or White (RAL#9003)
Enclosure / Finish: Black (RAL#9005) or White
(RAL#9003) low gloss, uniformly textured painted
15mm Baltic Birch plywood.
A
B
C
D
E
IC6-1062/00
D
E
7
Shipping Weight
20 lbs (8.9 kg) IC6-1062/00 loudspeaker
24 lbs (10.7 kg) IC6-1062T00 loudspeaker
Unit Weight
16 lbs (7.3 kg) IC6-1062/00 loudspeaker
20 lbs (9.1 kg) IC6-1062T00 loudspeaker
HxWxD
14.29" x 8.00" x 8.94"
(363 x 203 x 227 mm)
TECHNICAL DRAWING / DIMENSIONS / FINISH
I SERIES Compact 600
HIGH OUTPUT 6.5-INCH TWO-WAY
INSTALLATION LOUDSPEAKER
I SERIES
Compact 600
IC6-1062/00
HIGH OUTPUT 6.5-INCH TWO-WAY
INSTALLATION LOUDSPEAKER
CONNECTION DIAGRAMS
WEATHER-RESISTANT INPUT CABLE
WHITE POS (+)
BLACK COM (–)
+/–
DSP
Crossover
Passive
Input
Amp
0.86”
Protection
Circuit
Low Impedance
HF
70V
12.5W
RED
YELLOW 25W
ORANGE 50W
4.11”BROWN 100W
COM
BLACK
+/–
Passive
Thru
LF
Two-way single amp
NC
+
–
PASSIVE
INPUT
I SERIES
Revised 6
+
–
100V
25W
50W
100W
N/C
COM
70V/100V
Made in the USA
Label# 1140
I SERIES Com
Autoformer
PASSIVE
THRU
0.86”
Community Light & Sound, Inc.
333 East Fifth Street, Chester, PA 19013 USA
Low Impedance Input Panel (Indoor)
70V / 100V Input Panel (Indoor)
4.11”
NOTES
1. PERFORMANCE SPECIFICATIONS All measurements
are taken indoor using a time-windowed and processed
signal to eliminate room effects, approximating an
anechoic environment, a distance of 6.0 m. All acoustic
specifications are rounded to the nearest whole number.
An external DSP with settings provided by Community
Professional Loudspeakers is required to achieve the
specified performance; further performance gains can
be realized using Community’s dSPEC226 loudspeaker
processor with FIR power response optimization.
2. OPERATING RANGE The frequency range in which the
on-axis processed response remains within 10dB of the
average SPL.
3. CONTINUOUS POWER HANDLING Maximum continuous
input voltage (and the equivalent power rating, in watts,
at the stated nominal impedance) that the system can
withstand, without damage, for a period of 2 hours using
an EIA-426-B defined spectrum; with recommended signal
processing and protection filters.
4. NOMINAL SENSITIVITY Averaged SPL over the operating
range with an input voltage that would produce 1 Watt
at the nominal impedance and the averaged SPL over
the operating range with a fixed input voltage of 2.83V,
respectively; swept sine wave axial measurements with
no external processing applied in whole space, except
where indicated.
Community Professional Loudspeakers
333 East Fifth Street, Chester, PA 19013-4511 USA
Phone (610) 876-3400 • Fax (610) 874-0190
communitypro.com • info@communitypro.com
Label# 11379
I SERIES Com
Autoformer
5. NOMINAL MAXIMUM SPL Calculated based on nominal
/ peak power handling, respectively, and nominal
sensitivity; exclusive of power compression.
6. EQUALIZED SENSITIVITY The respective SPL levels
produced when an EIA-426-B signal is applied to the
equalized loudspeaker system at a level which produces
a total power of 1 Watt , in sum, to the loudspeaker
subsections and also at a level which produces a total
voltage, in sum, of 2.83V to the loudspeaker subsections,
respectively; each referenced to a distance of 1 meter.
7. EQUALIZED MAXIMUM SPL The SPL produced when an
EIA-426-B signal is applied to the equalized loudspeaker
system, at a level which drives at least one subsection to
its rated continuous input voltage limit, referenced to a
distance of 1 meter. The peak SPL represents the 2:1 (6dB)
crest factor of the EIA-426-B test signal.
8. AXIAL PROCESSED RESPONSE The on-axis variation
in acoustic output level with frequency of the complete
loudspeaker system with recommended signal processing
applied. 1/6 octave Gaussian smoothing applied.
9. AXIAL SENSITIVITY The on-axis variation in acoustic
output level with frequency for a 1 Watt swept sine
wave, referenced to 1 meter with no signal processing.
1/6 octave Gaussian smoothing applied.
10. HORIZONTAL / VERTICAL OFF-AXIS RESPONSES The
loudspeaker’s magnitude response at various angles
off-axis, with recommended signal processing applied in
the operating mode which utilizes the largest number of
individually amplified pass bands. 1/6 octave Gaussian
smoothing applied.
11. DIRECTIVITY INDEX The ratio of the on-axis SPL
squared to the mean squared SPL at the same distance
for all points within the measurement sphere for each
given frequency; expressed in dB. 1/6 octave Gaussian
smoothing applied.
12. BEAMWIDTH The angle between the -6dB points in
the polar response of the loudspeaker when driven in
the operating mode which utilizes the largest number of
individually amplified pass bands. 1/6 octave Gaussian
smoothing applied.
Data presented on this spec sheet represents a selection of
the basic performance specifications for the IC6-1062. These
specifications are intended to allow the user to perform a
fair, straightforward evaluation and comparison with other
loudspeaker spec sheets. For a detailed analysis of this
loudspeaker’s performance, please download the GLL file
and/or the CLF file from our website: communitypro.com
CAUTION: Installation of loudspeakers should only be
performed by trained and qualified personnel. It is strongly
recommended that a licensed and certified professional
structural engineer approve the mounting design.
IC6-1062/00 [02JUN2016]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising