SIMATIC 505
© Siemens AG 2007
SIMATIC 505
General
Application
Fig. 5/1
Design
5/2
SIMATIC 505 programmable controllers
The SIMATIC 505 programĆ
mable controllers provide a
special combination of openĆ
loop control tasks, closedĆ
loop control tasks and comĆ
plex mathematical functions
for a large variety of applicaĆ
tions in process engineering.
Compactness
The SIMATIC 505 programĆ
mable controllers have an exĆ
tremely compact design corĆ
responding to the
stateĆofĆtheĆart of integrated
circuits (ASICs). The latest
design technology ensures
low space requirements with
high performance. System
costs and space requirements
decrease at the same time as
system reliability increases.
Intelligent I/O modules
The SIMATIC 505 programĆ
mable controllers have differĆ
ent digital, analog and intelliĆ
gent I/O modules as well as
communications processors
available. There are digital
module versions with 8, 16,
32 inputs/outputs, and relay
module versions with 8, 16,
32 outputs. Analog input/outĆ
put modules acquire signals
from thermocouples and RTD
inputs. In addition, there are
ATĆcompatible PC modules
and different communications
processors (for example, with
RS 232 interfaces) available.
Distributed control
The SIMATIC 505 programĆ
mable controllers let you take
a truly distribued approach to
your plant control. First of all
they are designed to meet the
latest IEC safety and reliability
standards to withstand the
toughest industrial environĆ
ments so that they can be
placed wherever they are
needed. Secondly, a powerful,
remote I/O capability enables
I/O modules and subracks to
be placed as far as 1000
m/3280 ft from the controller
itself, thus eliminating the
need for long, multiple cable
runs to remote sensors and
actuators.
Siemens ST 50 · 1998
© Siemens AG 2007
SIMATIC 505
General
Design (continued)
Redundant systems
For critical process applicaĆ
tions, the SIMATIC
560T/TI565T systems can be
combined with the TI505
Hot backup with singleĆchanĆ
nel I/O design
The hot backup system conĆ
sists of a redundant configuĆ
ration of the CPUs.
The active PLC and the
standby PLC are each
equipped with a hot backup
card.
A fiberĆoptic connection beĆ
tween the active and the
standby PLC executes self
monitoring and synchronizaĆ
tion of the programs up to four
times per cycle.
The active PLC updates the
standby PLC automatically
and hands over control as
soon as a serious fault ocĆ
curs.
The hot backup system reĆ
quires no additional programĆ
ming by the user.
Hot backup with
twoĆchannel I/O design
The TI505 I/O system can
also operate redundantly.
For this purpose, a special
power supply module and the
RBC (remote base controller)
are installed redundantly
(double) in a special redunĆ
dantly designed mounting
rack. The RFĆRBC is an intelliĆ
gent interface between the
RCC (remote channel controlĆ
ler) and the redundant
mounting rack.
The redundant mounting rack,
equipped with 11 slots, conĆ
tains two power supply modĆ
ules (110/220 V AC or 24 V
DC) and two RBCs. In addiĆ
tion, each redundant mountĆ
ing rack has two cables so
that if one line fails an autoĆ
matic switch can be made to
the other.
Siemens ST 50 · 1998
I/O modules to form a redunĆ
dant system. The redundant
design reduces any possible
down time to a minimum.
TI560T/TI565T
Hot backup
card
RCC
TI560T/TI565T
Hot backup
card
RCC
TRISPLITTER
box
505Ć6660
power supply
RCC
505-6504
505-6508
505-6516
Fig. 5/2
Hot backup with singleĆchannel I/O
It guarantees the integrity of
both PLCs even during onĆline
program edits.
TI560T/TI565T
Hot backup
card
RCC
TI560T/TI565T
Hot backup
card
RCC
DUAL TRISPLITTER
box
505-6660
power supply
RCC
505-6511
Fig. 5/3
Hot backup with twoĆchannel I/O
In normal mode, one of the reĆ
dundant RCBs is active and
the other is in standby. If an
fatal fault occurs in the active
RCB, communications are auĆ
tomatically switched to the
redundant standby RCB. This
takes place within one PLC
cycle.
5/3
© Siemens AG 2007
SIMATIC 505
General, Ordering Data
Programming
Ease of use means different
things to different people.
That's why a choice of differĆ
ent development tools is ofĆ
fered.
The SIMATIC TISOFT package
is available for programming
the PLC. For those with preĆ
vious knowledge of process
automation, there is SIMATIC
APT.
SIMATIC APT uses CASE
(computerĆaided software enĆ
gineering) technology which
provides for a structured apĆ
proach to programming while
simultaneously enabling maĆ
stery of sequential control
processes and continuous
closedĆloop control functions.
APT ensures that the proĆ
grams are well structured and
documented. The data coheĆ
rence check reduces proĆ
gramming errors to a miniĆ
mum.
Humidity
In accordance with
IEC 68Ć2Ć3 Ca.
FaultĆfree operation under enviĆ
ronmental conditions up to 95%
humidity at 60 _C.
Mechanical shock test
In accordance with
IEC 68Ć2Ć21 EA test.
No detrimental effect in the case
of nonĆrepetitive shocks.
General technical specifications
Safety and reliability
SIMATIC 505 corresponds to the
IEC 65A and DIN 41 494 stanĆ
dards for industrial and process
control systems.
Insulation group
In accordance with IEC 801, Part
2, Paragraph 4.
Protection against static electrical
discharge to 15 kV.
In accordance with
IEC 68Ć2Ć14 NB.
FaultĆfree operation at temperatuĆ
res fluctuating between 0 to
60 _C.
Temperature range
Ordering data TI525 to TI565
Power supply units
1 required per mounting rack
2 per redundant mounting rack
110/220 V AC, single
110/220 V AC, single or redundant
24 V DC, single or redundant
CPUs
TI525
Memory 10 KB,
512 digital/128 analog inputs/outputs
TI535
Memory 40 KB,
1024 digital/1024 analog
inputs/outputs
TI545
Memory 192 KB,
2048 digital/1024 analog inputs/
outputs, 64 controllers
TI545
Memory 96 KB,
1024 digital/1024 analog inputs/
outputs, 16 controllers
5/4
Order No.
Order No.
CPUs (continued)
Firmware upgrade kit
for TI545Ć1101 Version 2.1.1
for TI545Ć1102 Version 3.1
PPX:2601099-8005
PPX:2601099-8006
TI555
8192 digital/8192 analog inputs/
outputs,
memory 384 KB,
memory 1920 KB
PPX:555-1101
PPX:555-1102
PPX:505-6660
PPX:505-6660-A
PPX:505-6663
TI560T (with power supply)
for twistedĆpair cable
S 110 V AC, RS 485, RCC
S 24 V DC, RS 485, RCC
PPX:560T1KM-1101
PPX:560T1KM-1102
PPX:525-1102
for coaxial cable connection
S 110 V AC, RCC
S 24 V DC, RCC
PPX:560T4KM-1101
PPX:560T4KM-1102
TI565T (with power supply)
for twistedĆpair cable
S 110 V AC, RS 485, RCC
S 24 V DC, RS 485, RCC
PPX:565T1KM-1101
PPX:565T1KM-1102
for coaxial cable connection
S 110 V AC, RCC
S 24 V DC, RCC
PPX:565T4KM-1101
PPX:565T4KM-1102
Mounting racks
for TI505
4 slots
8 slots
11 slots, redundant
16 slots
See Section 1 for further techĆ
nical specifications
PPX:505-6504
PPX:505-6508
PPX:505-6511
PPX:505-6516
PPX:535-1212
PPX:545-1102
PPX:545-1103
Siemens ST 50 · 1998
© Siemens AG 2007
SIMATIC 505
Ordering data
Ordering data TI525 to TI565
CPUs (continued)
Programming manual for TI505
German
English
Italian
PPX:505-8104D
PPX:505-8104-5
PPX:505-8104I
Technical product description
for TI525/TI535
English
PPX:505-8103
System manual for TI525, TI535
English
German1)
French1)
PPX:505-8106
PPX:505-8106D
PPX:505-8106F
Technical product description
for TI545/TI555
CPU 1101
English
German
French
Italian
PPX:545-8101-4
PPX:545-8101D
PPX:545-8101F
PPX:545-8101I
System manuals for TI545/TI555
CPU 1102, English
PPX:545-555-8101-2
Documentation set TI545
(hardware, design, I/O
programming), English
PPX:545-8102
Technical product description
for TI545
English
German
French
Italian
PPX:545-8103-3
PPX:545-8103-3D
PPX:545-8103-3F
PPX:545-8103-3I
System manual for TI555,
CPU
English
German
französich
Italian
PPX:555-8101-2
PPX:555-8101-1D
PPX:555-8101-1F
PPX:555-8101-1I
System manual for
TI560T/TI565T, English
PPX:560-65-8109
Programming manual for
TI560T/TI565T
English
German1)
French1)
Italian1)
PPX:560-65-8102
PPX:560-65-8102D
PPX:560-65-8102F
PPX:560-65-8102I
Product description for
TI560T/TI565T
English
French
Italian
PPX:560-65-8107
PPX:560-65-8107F
PPX:560-65-8107I
User manual
for redundant I/O, English
PPX:560-65-8108
1) Available in Europe only.
2) TI535: additional IOCC in basic mounting rack.
Siemens ST 50 · 1998
Order No.
Order No.
Controllers
Controllers for expansion units
S I/O channel controller (IOCC)
for TI5352)
S Distributed base controller
(DBC) for TI5353)
S Remote channel controller
(RCC), coaxial
S Remote channel controller
(RCC), RS 485 interface
S Remote base controller (RBC),
coaxial FM mode4)
S Remote base controller (RBC),
RS 485 interface4)
S Remote base controller (RBC)
for TI560T/565T, max. 4 km,
coaxial
S Remote base controller (RBC),
for TI560T/565T, max. 1 km,
RS 485
S 505/6MT controller
S 505/7MT controller
PPX:505-6830
PPX:505-6840
PPX:560-2126-B
PPX:560-2127-B
PPX:505-6850-A
PPX:505-6851-A
PPX:500-2114-A
PPX:500-5114-A
PPX:505-5190
PPX:505-7190
Manuals
S 7 MT interface adapter
S 6 MT interface adapter
PPX:505-8115-2
on request
Communications modules
Peerlink module,
PointĆtoĆpoint link between 2 to
16 modules, mixed link between
TI500 and TI505, with manual
S for TI505, 2 redundant channels
S for TI500, 1 channel
S for TI500, 2 redundant channels
PPX:505-7354
PPX:500-5053
PPX:500-5054
TIWAY communications processor NIM
with manual
S 2 redundant interfaces (local
line) for TI505
S 2 redundant interfaces (RS232)
for TI505
S 2 redundant interfaces (local
line) for TI500
S 2 redundant interfaces (RS232)
for TI500
UNLINK host adapter
with manual and PIM
S 115 V AC, local line/local line TIĆ
WAY interfaces, computer interĆ
faces RS232C/423
S 115 V AC, RS232C/RS232C TIĆ
WAY interfaces, computer interĆ
faces RS232C/423
S 220 V AC, local line/local line TIĆ
WAY interfaces, computer interĆ
faces RS232C/423
S 220 V AC, RS232C/RS232C TIĆ
WAY interfaces, computer interĆ
faces RS232C/423
PPX:505-7339
PPX:505-7340
PPX:500-5039
PPX:500-5040
PPX:505-7111
PPX:505-7112
PPX:505-7113
PPX:505-7114
3) TI535: DBC as interface in each expansion rack.
4) RBC as interface between CPU and RCC in expansion racks for 560T/565T.
5/5
© Siemens AG 2007
SIMATIC 505
Ordering data
Ordering data 525 to 565
Communications modules
(continued)
FIM fieldbus interface module,
(with manual)
Connection with USS protocol (for
SIMOVERT/SIMOREG drives),
Profibus link (e.g. ET 200, S5Ć95U,
drives), connection as for expanĆ
sion rack (remote base)
PPX:505-7202
Industrial Ethernet module
(NIM/Ethernet)
PointĆtoĆpoint link via Layer 4,
connection via TF functionality
Layer 7, with manual
PPX:505-CP1434TF
MODBUS NIM
2 redundant interfaces, slave staĆ
tions, with manual (English) and
software
PPX:505-5184
RS485 coaxial converter
for connecting coaxial I/O to
TI545/555/575
PPX:505-6860
TIWAY TAP
Distributor terminal for bus cable
PPX:2703770-8001
500 and 505 manual
PPX:500-8115
Manuals for TIWAY modules
S TI505 user description, English
S TI500 user description, English
S TI500 technical description, EnĆ
glish
PPX:TIWAY-8124
PPX:TIWAY-8110
PPX:TIWAY-8119
Manuals for UNILINK host
adapter
S Installation manual, English
S User manual, English
S TIWAY system, English
PPX:TIWAY-8106
PPX:TIWAY-8121
PPX:TIWAY-8101
User for FIM,
German
English
French
Italian
PPX:505-8124-2D
PPX:505-8124-3
PPX:505-8124-2F
PPX:505-8124-2I
User for Industrial
Ethernet,
German
English
French
Italian
PPX:505-8126-1D
PPX:505-8126-2
PPX:505-8126-1F
PPX:505-8126-1I
MODBUS NIM, English
PPX:505-8122-1
I/O modules
Digital input modules
S 4 to 15 V DC, 8Ćpoint source/
sink inputs
S 4 to 15 V DC, 16Ćpoint source/
sink inputs
S 4 to 15 V DC, 32Ćpoint source/
sink inputs
S 24 V DC, 8Ćpoint source/sink inĆ
puts
S 24 V DC, 32Ćpoint source/sink
inputs
5/6
Order No.
Order No.
PPX:505-4108
PPX:505-4116
PPX:505-4132
PPX:505-4308
PPX:505-4332
I/O modules (continued)
Digital input modules (cont.)
S 48/24 V DC, 16 inputs
S 24 V AC, 8 inputs
S 24 V AC, 16 inputs
S 24 V AC, 32 inputs
S 110 V AC, 8 inputs
S 110 V AC, 16 inputs
S 110 V AC, 32 inputs
S 220 V AC, 8 inputs
S 220 V AC, 16 inputs
S 220 V AC, 32 inputs
S 24 V DC isolated, 16/8 interrupt
inputs
S 48 V DC, isolated interrupts, 16
inputs/outputs
S 125 V DC, isolated interrupts,
16 inputs/outputs
S Simulation modules, 32 inputs
Digital output modules
S 24 V DC, 0.5 A, 8 sourceĆonly
outputs
S 24 V DC, 0.5 A, 8 sinkĆonly outĆ
puts
S 24 V DC, 0.5 A, 16 sourceĆonly
outputs
S 24 V DC, 0.5 A, 16 sinkĆonly
outputs
S 24 V DC, 0.5 A, 32 sourceĆonly
outputs
S 24 V DC, 0.5 A, 32 sinkĆonly
outputs
S 24 V DC, 2 A, 8 sourceĆonly
outputs
S 24 V DC, 2 A, 8 sinkĆonly outĆ
puts
S 24 V DC, 2 A, 16 sourceĆonly
outputs
S 24 V DC, 2 A, 16 sinkĆonly outĆ
puts
S 24 V DC, 2 A, 32 sourceĆonly
outputs
S 24 V DC, 2 A, 32 sinkĆonly outĆ
puts
S 115 V AC/DC, 4 A, 16 relay outĆ
puts
S 24/110 V AC, 0.5 A, 8 outputs
S 24/110 V AC, 0.5 A, 16 outputs
S 24/110 V AC, 0.5 A, 32 outputs
S 110/220 V AC, 1 A, 8 outputs
S 110/220 V AC, 1 A, 16 outputs
S 110/220 V AC, 1 A, 32 outputs
S 220 V AC, 24 V DC, 2 A,
8 relay outputs
S 220 V AC, 24 V DC, 2 A,
16 relay outputs
S 220 V AC, 24 V DC, 2 A,
32 relay outputs
S 220 V AC, 24 V DC, 5 A/3 A,
16 relay outputs
S Simulation modules, 32 outputs
PPX:505-4316-A
PPX:505-4008-A
PPX:505-4016-A
PPX:505-4032-A
PPX:505-4208-A
PPX:505-4216-A
PPX:505-4232-A
PPX:505-4408-A
PPX:505-4416-A
PPX:505-4432-A
PPX:505-4317
PPX:505-4318
PPX:505-4319
PPX:505-6010
PPX:505-4508
PPX:505-3508
PPX:505-4516
PPX:505-3516
PPX:505-4532
PPX:505-3532
PPX:505-4708
PPX:505-3708
PPX:505-4716
PPX:505-3716
PPX:505-4732
PPX:505-3732
PPX:505-5417
PPX:505-4608
PPX:505-4616
PPX:505-4632
PPX:505-4808
PPX:505-4816
PPX:505-4832
PPX:505-4908
PPX:505-4916-A
PPX:505-4932
PPX:505-5518
PPX:505-6011
Siemens ST 50 · 1998
© Siemens AG 2007
SIMATIC 505
Ordering data
Ordering data 525 to 565
Order No.
I/O modules (continued)
Analog input module
8Ćchannel, 12 bits (0Ć5 V DC/"5V)
PPX:505-6108-A
Analog output module
8Ćchannel, 12 bits
(0Ć10 V DC/0Ć20 mA)
Analog input/output modules
S 8x15 bit input/4x12 bit output
(mixed ranges)
S 8x13 bit input/4x12 bit highĆ
speed output (mixed ranges)
Parallel input/output modules
S 8Ćchannel, multiplex TTL, 16Ćbit
word inputs
S 8Ćchannel, multiplex TTL, 16Ćbit
word inputs
PPX:505-6208-A
PPX:505-7012
PPX:505-7016
PPX:505-6308
PPX:505-6408
User manual for digital I/O modules
PPX:505-8105-2
Manual for 505-4317 interrupt
module
PPX:505-8123-1
Manual for analog I/O
English
German
French
Italian
Special modules
Thermocouple/RTD modules
(with manual)
S 8 inputs, Ć50 to +50 mV, thermoĆ
couples
S 8 inputs, Ć50 to +50 mV, RTD
S Calibration connector for RTD
module
PPX:505-8110-2
PPX:505-8110-2D
PPX:505-8110-2F
PPX:505-8110-2I
PPX:505-7028
PPX:505-7038
PPX:2587705-8009
User manual for thermocouple
module
English
German
French
Italian
PPX:505-8111-3
PPX:505-8111-2D
PPX:505-8111-2F
PPX:505-8111-2I
User manual for RTD module
English
German
French
Italian
PPX:505-8114
PPX:505-8114-2D
PPX:505-8114-2F
PPX:505-8114-2I
High-speed counter and encoding module
2 counters, 4 inputs,
4 outputs, counter speed 50 kHz,
5 to 24 V DC,
with manual
High-speed counter and encoding module
6 counters, 8 inputs,
8 outputs, counter speed
100 kHz, 5 to 24 V DC,
with manual
Siemens ST 50 · 1998
PPX:505-7002
PPX:505-7003
Order No.
Special modules (continued)
Manual for counter module
with 2 counters, English
with 6 counters, English
PPX:505-8113-2
PPX:505-8127-1
Basic module
2 (RS232C/423) interfaces, meĆ
mory 28 KB, transmission rate
110Ć19200 bps
PPX:505-7101
Backup battery for basic
module
PPX:2587678-8010
EEPROM for basic program
PPX:2587681-8028
Manual
(supplied with module)
PPX:505-8101-2
386/ATM module
with CPU 30C286SX, RAM 4 MB,
hard disk 120 MB, clock freĆ
quency 8 or 16 MHz, MSĆDOS
manual (English) and software
PPX:505-ATM-4120
Manual
(supplied with module)
PPX:505-ATM-MANL-3
Turbo plastic module
5 analog inputs
0 to +5/0 to +10V DC
4 analog outputs,
-10 to +10 V DC
4 digital outputs, 15 to 24 V DC
PPX:505-5100
Turbo parison module
4 digital inputs/5 analog inputs
4 digital inputs/4 analog inputs
PPX:505-5103
Hot backup system
560T hot backup system
with 560/565T hot backup card,
upgrade kit (PPX:560Ć2129ĆA)
and:
S 2 560T CPU
(PPX:560T1KMĆ1101)
S 2 560T CPU
(PPX:560T1KMĆ1102)
S 2 560T CPU
(PPX:560T4KMĆ1101)
S 2 560T CPU
(PPX:560T4KMĆ1102)
S 2 565T CPU
(PPX:565T1KMĆ1101)
S 2 565T CPU
(PPX:565T1KMĆ1102)
S 2 565T CPU
(PPX:565T4KMĆ1101)
S 2 565T CPU
(PPX:565T4KMĆ1102)
Manuals
S Hot backup installation instrucĆ
tions, English
S TI505 redundant I/O, English
PPX:560H1KM-1101
PPX:560H1KM-1102
PPX:560H4KM-1101
PPX:560H4KM-1102
PPX:565H1KM-1101
PPX:565H1KM-1102
PPX:565H4KM-1101
PPX:565H4KM-1102
PPX:560-65-8103-2
PPX:505-8125-2
5/7
© Siemens AG 2007
SIMATIC 505
Ordering data
Ordering data 525 to 565
Spares for TI525 to TI555
S Connector: Side access (qty 1)
S Connector: Front access (qty 1)
S dummy plate (pack of 5)
S Fuse holder for power supply
(pack of 4)
S Screws for dummy plate (pack
of 10)
S 505 RTD calibration connector
PPX:2587705-8010
PPX:2587705-8011
PPX:2587705-8003
PPX:2587704-8001
PPX:2587705-8001
PPX:2587705-8009
S EEPROM
for 525/535
for 545/555, 128 KB
for 555, 256 KB
PPX:2587681-8020
PPX:2587681-8022
PPX:2587681-8031
S EPROM
for 525/535
for CPU 545/555, 128 KB
for 555, 256 KB
PPX:2587681-8012
on request
PPX:2587681-8030
S Backup battery for
525/535/545/650T/656T
S Programming cable for 545
S Memory expansion for
545Ć1101, 256 KB
S Relay, 5 A, pack of 5
PPX:2587678-8005
PPX:2601094-8001
PPX:545-1111
PPX:2587704-8002
Ordering data 575
Order No.
575 CPU
832 KB
PPX:575-2103
System manual for 575
PPX:575-8101-4
575 user manual
PPX:575-8104-1
Power supply modules (VME)
S 115 V AC, 185 watts
S 115/230 V AC, 300 watts
PPX:575-6660
PPX:575-6663
Interface for expansion unit
(RCC)
PlugĆin card in CPU 575
PPX:575-2126
Digital input module (VME)
with 32 inputs, 110 V AC
PPX:575-4232
Digital output module (VME)
with 16 outputs, 110 V AC
PPX:575-4616
Digital input/output module
(VME)
with 16 I/O, 24 V DC
PPX:575-4366
Mounting rack (VME) 1.0”
S with 9 slots
S with 14 slots
S with 16 slots
Coprocessor
(optional, Motorola 68882)
5/8
Order No.
Order No.
PPX:575-2124
PPX:575-2128
PPX:575-2130
PPX:2589739-8010
Spares for 525 to 555 (continued)
Fuses
S Set, 3 A/125 V, pack of 5, for
505Ć45xx
S Set, 3 A/250 V, pack of 5, for
505Ć48xx
S Set, 3 A/250 V, pack of 5, for
505Ć46xx
S Set, 3 A/250 V, pack of 5, for
505Ć6660
Spares for TI560/565
S 560T digital CPU
S 565T special function CPU
S 560T/565T power supply modĆ
ule, 110/220 V AC
S 560T/565T power supply modĆ
ule, 24 V DC
S Remote channel controller
(RCC) (FM)
S Remote channel controller
(RCC) (RS 485)
S Hot backup card
S Hot backup upgrade kit
(2 modules + cable)
S Memory expansion module 64 K
words
S Memory expansion module
256 K words
S Distributor box for 565T hot
backup, tri splitter
S FiberĆ optic cable for 565 HBU
PPX:2587679-8012
PPX:2587679-8013
PPX:2587679-8014
PPX:2587679-8015
PPX:560-2820
PPX:565-2820
PPX:560-2122
PPX:560-2123
PPX:560-2126-B
PPX:560-2127-B
PPX:560-2128-A
PPX:560-2129-A
PPX:560-2130
PPX:560-2136
PPX:2587755-8001
PPX:2587693-8010
Order No.
Accessories
S Connecting cable with RS232
interface (for connecting proĆ
gramming devices)
S dummy plate 1" for 575Ć2124
(9 slots)
S dummy plate 0.2" for 575Ć2124
(9 slots) or for 575Ć2128
(14 slots)
S dummy plate 0.4" for 575Ć2124
(9 slots) or for 575Ć2128
(14 slots)
S dummy plate 0.6" for 575Ć2130
(16 slots)
S dummy plate 0.8" for 575Ć2130
(16 slots)
S Mounting rail for 575Ć2124
(9 slots)
S Mounting rail for 575Ć2128
(14 slots)
S Mounting rail for 575Ć2130
(16 slots)
S Ventilator set for 575Ć2130,
115/230 V AC
S J2 backplane bus connector for
power supply, 1 slot for all deĆ
vices (optional)
S Daisy chain bridging connector
for 575Ć2124 or for 575Ć2128
S Spare I/O connector
S Spare battery, 4 V, 5 Ah
S Spare fuse for 575Ć6660, 8 A
PPX:VPU200-3605
PPX:2589739-8003
PPX:2589739-8004
PPX:2589739-8005
PPX:2589739-8014
PPX:2589739-8015
PPX:2589739-8001
PPX:2589739-8002
PPX:2589739-8016
PPX:575-2131
PPX:2589739-8012
PPX:2589739-8011
PPX:2589739-8007
PPX:2589739-8006
PPX:2589739-8008
Siemens ST 50 · 1998
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising