HP Scitex FB7600 Industrial Press

HP Scitex FB7600 Industrial Press
HP Scitex FB7600
Industrial Press
Grow your business
Achieve quick ROI with more digital printing opportunities. The ability
to print on a wide variety of media up to 25 mm thick expands your
business. Workflow enhancements increase productivity and reduce
effort. HP Scitex Print Care maximizes uptime.
Do more with digital
•Get great results on POP. Six HP UV-curable color inks provide
excellent dot gain and color gamut, are ISO12647-2 certified(1,
and comply with contract proofing standards according to
ISO12647-7(2. Measured ink coverage on 100% POP files is up to
124 m2/L(3.
•Achieve maximum throughput—and high margins—on plastics(4.
•New HP FB225 Scitex color inks provide cross-hatch level(5
adhesion and enable higher productivity and reduced labor and
material costs by eliminating pre-treatment.
•Enjoy simultaneous loading/unloading with the ¾-automated
media handling system. HP’s patented 6-vacuum-zone system
reduces the need for masking exposed areas. Print flexible, rigid
applications—with great results on corrugated media—and save
set-up time.
Profit more from the first run
•Experience higher throughput and save time and resources. The HP
Scitex FB7600 Industrial Press lets you print up to 95 full sheets an
hour with production speed, and up to 55 full sheets an hour with
POP quality.
•Enable simultaneous loading of up to 4 sheets with the optional
multi-sheet loading table. The ability to handle smaller sheets
reduces post-print cutting and handling costs. Alignment is easier
with the choice of either left or right registration.
•Prepare your jobs automatically with the hot folders and job queue.
Hot folders enable you to easily drop files for print without the need
to pull them one by one into the press. With the queue, all printready jobs, using same media type, print in order automatically.
•Print much faster than before and produce high-quality results on
backlit files with enhanced Pantone colors hit using Saturation
Control mode. Simply adjust the saturation from the GUI up to
200% with no reduction on throughput—and without going back to
the RIP.
To learn more, visit www.hp.com/go/ScitexFB7600
1)
At POP17/34 modes.
2)
Ugra ISO12647-2 certification achieved by Christinger Partner AG for HP FB225 Scitex color inks
and the HP Scitex FB7600 Industrial Press.
3)
Printed in POP34 gloss mode on Kappa Foam Board, validated with the Ugra/Fogra media
wedge V3 and IDEAlliance Digital Control Strip 2009.
4)
Plastics media span is narrower when using HP FB225 White Scitex Ink.
5)
According to D3359-02 ASTM Standard Test Methods for Measuring Adhesion by Tape.
HP Scitex FB7600 Industrial Press
Maximize your uptime
•Expand your digital capabilities with the peace of mind in knowing that the HP Scitex
FB7600 Industrial Press is a total HP technology offering. It includes HP-manufactured
printheads and HP Scitex inks, combined with HP partner solutions you can count on.
Includes an uptime kit for fast recovery, maximizing uptime.
•Get more from your investment with this scalable, modular press designed to grow as you
expand your digital capabilities. HP offers upgrade packages with evolving features. For
example, 2 extra printhead beams and ink slots enable a white ink upgrade(1.
•Anticipate technical issues before they cause downtime. HP Scitex Print Care offers a
range of tools and services such as troubleshooting tools, maintenance wizards, and
in-line automatic printhead calibration. Achieve quick resolution at CallMe@HP(2.
Improve the environmental profile of your printing
•The short print run capabilities inherent to digital on-demand production better enable the
printing of just what is needed, when it is needed–potentially reducing the volume of
wasted prints and reducing the carbon footprint of your printing(3.
•Put UV-curable inks to work for you in generating new business opportunities. A reduced
odor(4 enables a wide range of indoor wide format graphics.
•Deliver indoor wide format graphics that make an impression—reassure with HP FB225
Scitex color inks approved according to indoor health-related environmental criteria—
GREENGUARD Children & Schools CertifiedSM inks also meet AgBB criteria for
health-related evaluation of VOC emissions of indoor building products(5.
1)
Use of white ink with the HP Scitex FB7600 Industrial Press requires the HP Scitex FB7500/FB7600 White Ink Kit.
2)
The remote HP technician may work directly with your operator, or with your HP Authorized Channel Partner.
An independently conducted and reviewed study (Sylvatica, 2010) indicated that printing point-of-sale signage on
the HP Scitex FB7500 Industrial Press (upon which the HP Scitex FB7600 Industrial Press is based) has a lower carbon
footprint than producing the same signage with an equivalent screen printer for print-run lengths within which some 90%
(Who Buys Wide Format Study, InfoTrends, April 2009) of signage print jobs fall.
3)
4)
Cured HP FB225 Scitex color inks have reduced odor compared to HP FB221 Scitex Inks, except when HP FB225
Scitex color inks are used together with HP FB225 White Scitex Ink.
5)
Not applicable when HP FB225 Scitex color inks are used together with HP FB225 White Scitex Ink. The ink system
using HP FB225 Scitex color inks is listed in the GREENGUARD Product Guide for signage (see www.greenguard.org)
and meets AgBB criteria for health-related evaluation of VOC emissions of indoor building products (see www.umweltbundesamt.de/produkte-e/bauprodukte/agbb.htm). Using a GREENGUARD Certified ink system, or
an ink system that meets AgBB criteria, does not indicate the end product is Certified or meets the criteria. Test prints
submitted at POP17 print mode.
HP and partners provide solutions and
production workflow tools that offer
greater uptime and flexibility to help print
service providers grow profits.
End-to-end Solutions
•The HP SmartStream Workflow Portfolio provides
complete workflow solutions – from job creation to
fulfillment – to efficiently drive more pages to press,
and help print service providers preserve profitability
on short-run, low-revenue jobs by minimizing
preparation and finishing time.
•HP Scitex Print Care is the industry-leading set of
tools and services that help you anticipate technical
issues before they cause downtime and provide
quick, accurate diagnosis and resolution. Experience
fast, efficient HP service that helps you maximize
uptime and reduce costs.
HP SmartStream Workflow on the
HP Scitex FB7600 Industrial Press
Free-standing display
unit
On corrugated
cardboard
Creation
Esko
ArtiosCAD
and Studio
Retail POP display
HP Hiflex
Web-to-print
Solution
On plastic
Backlit poster
On backlit film
Order &
submission
HP
SmartStream
Designer
Pre-press
Loading system
The versatile loading mechanism
enables the use of a wide range
of media. Together with in-line
media sensors, a media thickness
indicator, and an automatic
alignment procedure, the loading
system helps minimize the impact
of operator error.
Vacuum table
The six zones vacuum table
minimizes the need for masking
or taping of exposed areas. The
table moves according to the
sheet’s length, ensuring higher
sheets-per-hour rates for smaller
sheet sizes. In-line pins ensure
accurate registration when loading
particularly sensitive or heavy
media with the manual mode.
Press roller
An iron roller provides extra
flattening of wavy media.
Multi-Sheet and Automatic
Loading Options
An optional multi-sheet loading
table allows simultaneous
printing of up to 4 sheets for
smaller, pre-cut sheets, and
alignment to left or right for
efficient double-sided jobs. The
Hostert Automatic Loader
enables stack-to-stack operations
for enhanced productivity.
Unloading lift
Highly accurate stack registration
is enabled with the media
alignment bar assembled on the
unloader lift.
312 HP Scitex X2 Printheads
HP Scitex X2 drop-on-demand
piezoelectric inkjet printheads
equipped with 39,936 nozzles
enable the high ink flows required
to print high-quality images at high
speeds. Access to the printheads is
easy. The printing bridge doors
open to each side, and the
printing bridge is raised. The
operator-level replacement process
is straightforward.
RIP
Loading
Press
Edge-toedge
printing
EskoArtwork
i-cut Suite
GMG
ColorServer
Suite for
HP Scitex
Printers
Finishing
GrandRIP+ by
Caldera
ProductionHouse
by Onyx
HP Scitex
optional
Multi-sheet
Loader Kit
Hostert
Automatic
Loader
HP SmartSream
Production Analyzer
Hot
folders
Job
queue
HP Scitex Print Care
HP Scitex
FB7600
Industrial
Press
Saturation
Control
EskoArtwork
Kongsberg Cutting
Tables
Fulfillment
Technical specifications
Productivity
Up to 500 m2/hr (5380 ft2/hr) or 95 full-size sheets/hr(1
Resolution
Up to 600 dpi
Media
Handling: Sheet-to-sheet ¾-automatic loading, semi-automatic and manual loading and unloading, and up to 4-sheet simultaneous printing with optional Multi-sheet Loader Kit
Types:(2 Foam PVC, PVC sheets, polystyrene (HIPS), fluted polypropylene, polycarbonate, polyethylene, synthetic paper, SAV, paper, foamboard, corrugated
cardboard,(3 compressed cardboard, and others
Size: Rigid and flexible sheets up to 165 x 320 cm (65 x 126 in)
Thickness: Up to 25 mm, Minimum: 130 gsm
Weight for automatic loading: Up to 20 kg (44 lb)
Weight for manual loading: Up to 40 kg (88 lb)
Printing
Technology: Drop-on-demand, piezoelectric inkjet
Ink types: UV-curable pigmented inks
Ink compatibility: HP FB225 Scitex Inks
Ink colors: Cyan, magenta, yellow, black, light cyan, light magenta, and optional white
Ink coverage: Up to 124 m2/L (1335 ft2/L) (at POP17/34 modes)
Printheads: 312 total (52 per color), additional 104 for white ink
Outdoor durability: Up to 2 years UV with abrasion and water resistance(4
Ink drop: 42 pl
Printable area: 165 x 320 cm (65 x 126 in)
Print modes
RIP
Mode(5
Maximum Productivity
Beds/hr(6
POP17
90 m2/hr (967 ft2/hr)
17
POP30
160 m2/hr (1720 ft2/hr)
30
POP34
180 m2/hr (1937 ft2/hr)
34
POP34 Text
180 m2/hr (1937 ft2/hr)
34
POP48
250 m2/hr (2688 ft2/hr)
48
POP55
290 m2/hr (3120 ft2/hr)
55
Prod70
360 m2/hr (3873 ft2/hr)
70
Prod95
500 m2/hr (5380 ft2/hr)
95
Software: GrandRIP+ by Caldera(7 or ProductionHouse by Onyx
Input formats: All popular graphic file formats, including PostScript, PDF, EPS, Tiff, PSD, and JPG
Front end software features: Layout, step-and-repeat, color management and file sizing and cropping, edge-to-edge printing (bleed), queue, saturation control, slow
loading speed, image 2, hot folder, and align to left/right and multi-sheet with optional Multi-sheet Loader Kit
Physical characteristics Dimensions (w x d x h): 10.5 x 5.6 x 1.6 m (34.5 x 18.4 x 5.2 ft), Weight: 5000 kg (11,024 lb) with vacuum unit
Operating environment Temperature: 15 to 30°C (59 to 86°F), Humidity: 50 to 60% RH
Operating
requirements
Printer electrical voltage: 3-phase, 380 to 480 VAC, 50/60 Hz (+/- 3 Hz)
Printer power consumption: 17 kW, 30 A (printing), 17 kW, 30 A (max)
UV electrical voltage: 3-phase, 380 to 480 VAC, 50/60 Hz (+/- 3 Hz)
UV power consumption: 25 kW, 68 A(8 (printing), 40 kW, 120 A (max)
Warranty
1-year limited hardware warranty
Ordering information
Product
CM103A: HP Scitex FB7600 Industrial Press
Options/Upgrades
CP390A: HP Scitex FB7500/FB7600 Multi-sheet Loader Kit
Original HP printing
supplies
CP756A: HP FB225 2x5L Cyan Scitex Ink
CP386A: HP Scitex FB7500/FB7600 White Ink Kit
CP757A: HP FB225 2x5L Magenta Scitex Ink
CP758A: HP FB225 2x5L Yellow Scitex Ink
CP759A: HP FB225 2x5L Black Scitex Ink
CP760A: HP FB225 2x5L Light Cyan Scitex Ink
CP761A: HP FB225 2x5L Light Magenta Scitex Ink
Maintenance
CN750A: HP MF10 25-liter Scitex Cleaner
Applications
3D displays; Banners; Directional rigid signage; Displays; Double-sided banners; Exhibition, Event graphics; Exterior signage; Graphics design; Indoor posters; Interior
decoration; Light boxes - film; Light boxes - paper; POP/POS; POP rigid; Posters; Short-run packaging; Specialty rigid applications
CN751A: HP MF10 5-liter Scitex Cleaner
On 165 x 320 cm (65 x 126 in) sheets, including a full loading
and unloading cycle.
2)
Limitations to media may apply. Please refer to www.hp.com/go/mediasolutionslocator
3)
E, EE, and EB fluted boards; additional quality flat boards apply.
4)
According to ASTM D2565-99.
1)
ID
E- F
OR M AT I M A
GI
N
G
W
Each print mode’s gloss level can be controlled.
Numbers provided are based on maximum number of full-size beds per
hour (full bed size 1.65 x 3.2 m, 5 x 10 ft).
7)
X-Rite i1 Color for HP—Caldera profiles generated with i1 Profiler.
8)
This is the measured average/nominal power consumption, while using the
default setting of the machine. Should a user raise the default UV power
setting, the Nominal power consumption can increase by up to 40%.
5)
6)
© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP
products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting
an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
4AA3-6816ENUC. Rev. 1, March 2012.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising