Braemar integrated cooling systems
only
current
The Braemar "U" Series integrated cooler
is the only current MEPS compliant,
compliant
cooling product in the ‘cool only’ category in Australia .
MEPS
specifically designed, tested and registered integrated
+
Braemar integrated cooling systems
Cooling systems specifically designed to complement your new or existing*
Braemar gas heating system, for year round comfort
Braemar heating has found its perfect match
Australians have been coming home to the wonderful
warmth of Braemar ducted gas heating for more than
50 years, and Braemar Ecostar is Australia’s most efficient
range of ducted gas heaters.
But now, you can be comfortable all year round with
Braemar’s integrated cooling system. This system is
specially designed to use the same ductwork and grilles
as Braemar ducted gas heating – which makes installation
and operation so much easier. You can use Braemar
integrated cooling with existing* Braemar ducted gas
heating systems, as well as new installations. Ask your
dealer for details.
One heater, one cooler, one control
You can have year round heating and cooling, using one controller –
the Braemar Spectrolink Comfort Control. All Braemar 4, 5 & 6 Star
ducted gas heating systems offer you the ability to heat up to four
different zones to different temperatures.
Now, using the new Braemar TH4, TH5, THM5 or THM6 Star
Extra Air series ducted gas heater with Braemar integrated
cooling, you can have different cooling temperatures in up to four
different zones, too. You can even choose to just cool one zone**
– enhancing your comfort and helping to reduce your power bills.
Braemar integrated cooling units are compact, economical
to run and use R410A refrigerant, which is less harmful to the
environment than the more commonly used R22 refrigerant.
Choices to suit you
There are three models of Braemar integrated cooling,
delivering 700 to 1060 litres per second of nominal airflow
and a rated capacity of 10.8kW to 18.0kW. See overleaf for
technical specifications.
The table overleaf shows which Braemar integrated cooling
systems match with which Braemar gas heating systems.
Backed by the strength of Seeley International
Like all Braemar products, Braemar integrated cooling systems
are backed by Seeley International’s renowned service and
support. With a network of expert dealers and service agents
throughout Australia, you can be confident that, when you buy a
Seeley International product, you are buying excellence, reliability
and super-efficiency in which you can absolutely trust.
1300 360 815
Transforming global energy-efficiency
into an art form!
+
www.seeleyinternational.com
www.braemar.com.au
At the time of printing (0213) * Applicable to installations where airflow requirements and duct design are suitable ** Available on Extra Air models manufactured after January 2011
The Braemar "U" Series integrated cooler is the only current MEPS compliant,
specifically designed, tested and registered integrated cooling product in the ‘cool only’ category in Australia+.
"U" Series specifications
Indoor Unit
Outdoor Unit
U3515A
U3015A
Nominal Air Flow
(l/s)
Nominal Capacity
(kW)
Nominal AEER^
Applicable Braemar
Ducted Gas Heaters
755
14.40
3.55
THM6X23, TH5X23
810
14.50
3.56
TH4X25, TH3X25
935
14.90
3.65
THM5X30, TH4X30, TH3X30
960
14.99
3.67
THM6X32, TH5X32
"U"Series
"Y" Series specifications
Indoor Unit
Outdoor Unit
Y3500
Y3000
Y3520
Y3020
Nominal Air Flow
(l/s)
Nominal Capacity
(kW)
Nominal AEER^
Applicable Braemar
Ducted Gas Heaters
740
11.50
3.23
THM6X23, TH5X23
700
10.80
2.87
THM5X20, TH4X20, TH3X20
1060
18.00
3.28
THM6X32, THM5X30, TH5X32,
TH4X30, TH435, TH3X30
"Y"Series
^ AEER is net and includes input power calculation for IFM.
Warranty
Every single Braemar unit is made from premium grade materials and
supported by a comprehensive factory-backed warranty. While our
engineering and quality control procedures mean we don’t think you’ll ever
need to use it, our warranty is there for your protection... and peace of mind.
Braemar is a wholly owned subsidiary of Seeley International Pty Ltd. Established in 1972, Seeley
International has grown to become Australia's largest air conditioning manufacturer with brands
including Breezair, Climate Wizard, Braemar, Convair and Coolair. 100% Australian owned, Seeley
International exports Australian made products to more than 100 countries and also distributes and
markets the best of the world's refrigerated air conditioning products under licence in Australia.
Seeley International, world leaders in advanced, energy efficient cooling and heating technology.
Typical
outdoor unit
General specifications
Braemar Model Number
(Indoor/Outdoor)
System Model Number
Y3500 / Y3000
U3515A / U3015A
Y3520 / Y3020
BUCC36FTALAO-C
N/A
BUCC60FTALCO-C
380-415/3/50
Power Supply
V/Ph/Hz
220-240/1/50
220-240/1/50
Nominal Cooling Capacity
Capacity (kW)
11.5
14.9
18.0
Input (W)
3600
4080
5600
EER (W/W)
3.19
3.65
3.21
545x635x638
480x1645x460
645x635x638
Indoor dimension
Unit (HxWxD) (mm)
Indoor weight
Net (kg)
30
35
40
Outdoor noise level (power)
dB(A)
68
72
71
1012x815x412
970x1316x390
1012x1442x412
85
106
115
Ø9.5 / Ø19.05 / ID.24
Ø12.7 / Ø19.05 / ID.26.6
Ø12.7 / Ø19.05 / ID.24
Max. refrigerant pipe length (m)
30
30
30
Max. difference in level (m)
15
15
15
R410A / 3.3
R410A / 4.65
R410A / 4.2
7.5
12.0
7.5
Outdoor dimension
Unit (WxHxD) (mm)
Outdoor weight
Net (kg)
Piping Connection
Liq / Gas / Drain (mm)
Refrigerant / Charge
(kg)
Pre-Charged
Length (m)
Cat No. M379 REV A (0213)
Note: The above design and specifications are subject to change without notice for product improvement.
Rating Conditions
Cooling
Indoor Temperature
27ºC DB/19ºC WB
Outdoor Temperature
35ºC DB/24ºC WB (max. operating 43ºC)
1300 360 815
Transforming global energy-efficiency
into an art form!
+
At the time of printing (0213)
www.seeleyinternational.com
www.braemar.com.au
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising