Watlow Control Console Data Sheet PDF

Watlow Control Console Data Sheet PDF
C O N T R O L
C O N S O L E S
Self-Contained
Units Combine
Superior Products
And Innovative
Mechanical Designs
Watlow combines superior products and innovative
mechanical designs in its series of control consoles. Watlow
designed these units using many of its temperature and
process controls, making them an excellent choice for pointof-use applications.
Applications
The standard Watlow control consoles are available in one,
two or four control loop configurations. Each unit is supplied
with a heavy-duty fused line cord, fused output receptacle, a
solid state relay and ON/OFF rocker switch. The powdercoated metal case has vent openings on the top and bottom
for heat dissipation, keeping internal case temperatures
lower. On some models, serial communication options are
available through Watlow’s ANAWIN®
Windows® 95-based software or EIA/TIA-232 or EIA/TIA-422.
• Semiconductor
Custom-made systems are also available. Please consult a
Watlow sales representative for details.
Watlow provides total system development from concept to
design... through quality controlled manufacturing to on-site
installation and start-up.
• Plastics
• Packaging
• Food processing
• Laboratory
• Process
Features and Benefits
Compact size
• Fits easily into confined areas
Control options including on-off, proportional or
PID control
• Provides simple, reliable operation
Self-contained units
• Require no external components
Pre-wired
• Fast start-up and installation time
Thermocouple and RTD input
• Allows use of a low cost sensor of your choice
Serial communications
• Support for one-on-one, as well as remote networking of
controllers
Your Authorized Watlow Distributor Is:
WIN-CC-0205
Window® is a registered trademark of Microsoft.
1241 Bundy Boulevard
Winona, Minnesota 55987-5580 USA
Phone: 507-454-5300
Fax: 507-452-4507
Internet: www.watlow.com
e-mail: info@watlow.com
ISO 9001
Registered Company
Winona, Minnesota USA
To be automatically connected to the nearest North American Technical and Sales Office call:
1-800-WATLOW2
International Technical and Sales Offices: Australia, +61 (39) 335-6449 • China, +86 (21) 6277-2138 • France, +33 (01) 3073-2425 •
Germany, +49 (0) 7253-9400-0 • Italy, +39 (02) 458-8841 • Japan, +81 (03) 3518-6630 • Korea, +82 (02) 575-9804 • Malaysia, +60 (4) 641-5977 •
Mexico, +52 (442) 217-6235 • Singapore, +65 6778-5488 • Spain, +34 916 759 192 • Sweden, +46 31 7014959 • Taiwan, +886 (0) 7-288-5168 •
Sweden, +46 31 7014959 • United Kingdom, +44 (0) 115-964-0777
© 2005 Watlow Electric Manufacturing Company
Printed in the USA on Recycled Paper, 15 Percent Postconsumer Waste
C O N T R O L
C O N S O L E S
Mini Control Console
Specifications
The mini series is the smallest and most compact control
console offered, but features are not limited. The mini utilizes
a Watlow SERIES 935 or SD controller which can be set to a
number of different control modes. The solid state relay
provides longer heater life and a lower cost than other power
switching devices. The heater output is pre-wired for your
convenience. The Amp Mate-’n’-Lok® heater connector makes
installation quick and easy.
Features
•
•
•
•
•
•
Small foot print
Pre-wired output
AMP Mate-’n’-Lok® 2-pin output connection
Miniature thermocouple connector
Watlow SERIES 935 or SD controller
ON/OFF rocker switch
Controller
• Watlow SERIES 935
• Watlow SERIES SD (SD3C)
Dimensions
• 76 mm H x 90 mm W x 180 mm D
(3.0 in. H x 3.5 in W x 7.1 in. D)
Output Power Switching
• 8 amp maximum
• Output is powered through the line cord
Power Requirements
• 120VÅ(ac), +10 percent, -15 percent (NEMA 5-15 plug)
• 208/240VÅ(ac), ±10 percent, -15 percent
(NEMA 6-15 plug)
• Fused 10 amp
Sensor Input
• Factory selectable thermocouple
• Miniature thermocouple jack and plug
Output Configuration
• AMP Mate-’n’-Lok® connector
• Mating connector provided
Operating Environment
• 0 to 45˚C (32 to 113˚F)
• 0 to 90 percent RH, non-condensing
Weight
• 0.9 kg (2 lbs)
Ordering Information
Mini Control Console
M I N ISingle zone;
self-contained unit
Input
J = Type J thermocouple
K = Type K thermocouple
T = Type T thermocouple
R = RTD (100 ohm; 2-wire only)
Control
G = SERIES SD (1⁄32 DIN)
w/EIA-485 comms
1 = SERIES 935
5 = SERIES SD (1⁄32 DIN)
Display Color
R = Red/Green (only color option
available onSERIES SD (1/32 DIN)
G = Green (only available on
SERIES 935)
Line Voltage
1 = 120VÅ(ac)
2 = 208/240VÅ(ac)
Mate-’n’-Lok® is a registered trademark of AMP Company.
- 0 0 0 0
C O N T R O L
C O N S O L E S
Single Control Console
Sensor Input
• Factory selectable thermocouple
• Miniature thermocouple jack and plug
Output Configuration
• Factory selectable
AMP Mate-’n’-Lok® connector
A twist and lock connector
• Mating connector provided
Operating Environment
• 0 to 45˚C (32 to 113˚F)
• 0 to 90 percent RH, non-condensing
Weight
• 0.9 kg (2 lbs)
The single series offers a variety of control, input and heater
output options. The single series can be fitted with either a
Watlow SERIES 935 93,SD or 96 controller. The heater
output and control circuit are fused to protect the internal
components from damage. The heater output connector can
be ordered as either an Amp Mate-’n’-Lok or a twist and lock
connector. The heater output is pre-wired making installation
quick and easy.
Features
• Small foot print
• Pre-wired output
• AMP Mate-’n’-Lok® 2-pin or a twist and lock output
connection
• Miniature thermocouple connector
• Watlow SERIES 935 93,SD or 96 controller
• ON/OFF rocker switch
Specifications
Controller
• Watlow SERIES 935 • Watlow SERIES 93
• Watlow SERIES SD • Watlow SERIES 96
Dimensions
• 119 mm H x 76 mm W x 191 mm D
(4.7 in. H x 3.0 in W x 7.5 in. D)
Output Power Switching
• Utilizes a solid state relay
• 10 amp maximum fused output; 8 amp maximum load
• Output is powered through the line cord
Power Requirements
• 120VÅ(ac), +10 percent, -15 percent (NEMA 5-15 plug)
• 208/240VÅ(ac), ±10 percent, -15 percent
(NEMA 6-15 plug)
• Control is fused to 1.0 amp
Mate-’n’-Lok® is a registered trademark of AMP Company.
DeviceNet™ is a trademark of the Open DeviceNet Vendors
Association.
Ordering Information
Single Control Console
S N G LControl
A = SERIES 96 w/ramp and soak
C = SERIES 96 w/ramp and soak,
EIA-232 comms
G = SERIES SD (1/32 DIN)
w/EIA-485 comms
H = SERIES SD (1/16 DIN)
w/DeviceNet® on CAN
1 = SERIES 935
3 = SERIES 93
4 = SERIES 96
5 = SERIES SD (1/32 DIN)
6 = SERIES 96 w/EIA-232 comms
7 = SERIES SD (1/16 DIN)
Input
J = Type J thermocouple
K = Type K thermocouple
T = Type T thermocouple
R = RTD (2-wire)
Display
935
RX = Red
GX = Green
93/96/SD
RG = Red/Green (only color option
available on SD (1/32 DIN))
RR = Red/Red
GG = Green/Green (only available on
SERIES 93 and 96)
GR = Green/Red (only available on
SERIES 93 and 96)
Output Connector
1 = AMP Mate-’n’-Lok®
2 = Twist and lock
Line Voltage
1 = 120VÅ(ac)
2 = 208/240VÅ(ac)
-
0 0
C O N T R O L
Dual Control Console
C O N S O L E S
• Heavy duty dual or controller/limit
• 120VÅ(ac), +10 percent, -15 percent (NEMA 5-20 plug)
Operating Environment
• 0 to 45˚C (32 to 113˚F)
• 0 to 90 percent RH, non-condensing
Weight
• 2.3 kg (5 lbs)
Ordering Information
Dual Control Console
The dual series is the first package that offers multiple control
zones in one package. Watlow’s SERIES 935, 93, SD or 96
can be used as the control for the dual series. Each zone
utilizes a solid state relay for longer heater life and a lower
cost than other power switching devices. The heater output
connector can be ordered as either an Amp Mate-’n’-Lok® or
a twist and lock connector.
Features
• Small foot print
• Pre-wired outputs
• Amp Mate-’n’-Lok® 2-pin or a twist and lock output
connection
• Miniature thermocouple connector
• Watlow SERIES 935, 93, SD or 96 controllers
• ON/OFF rocker switch
Specifications
Controller
• Watlow SERIES 935 • Watlow SERIES 93
• Watlow SERIES SD • Watlow SERIES 96
Dimensions
• 114 mm H x 152 mm W x 191 mm D
(4.5 in. H x 6.0 in W x 7.5 in. D)
Output Power Switching
• Utilizes solid state relays
• Output is powered through line cord
• Light duty dual
• 8 amp maximum load (4 amps per zone)
• Heavy duty dual
• 16 amp maximum load (8 amps per zone)
• Light duty control/limit
• (8 amps maximum load)
• Heavy duty control/limit
• (12 amps maximum load)
Power Requirements
• Light duty dual or controller/limit
• 120VÅ(ac), +10 percent, -15 percent (NEMA 5-15 plug)
• 208/240VÅ(ac), ±10 percent, -15 percent
(NEMA 6-15 plug)
Mate-’n’-Lok® is a registered trademark of AMP Company.
DeviceNet™ is a trademark of the Open DeviceNet Vendors
Association.
D U A L0 0
Control
A = SERIES 96 w/ramp and soak
B = SERIES 96/97 w/ramp and
soak, EIA-232 comms
E = SERIES 96 w/EIA-485 comms
F = SERIES SD (1/16 DIN)
w/EIA-485 comms
G = SERIES SD (1/32 DIN)
w/EIA-485 comms
H = SERIES SD (1/16 DIN)
w/DevicNet™ on CAN
J = SERIES SD6C/SD6L
Controller/Limit (1/16 DIN)
w/DevicNet™ on CAN 1 = SERIES 935
3 = SERIES 93
4 = SERIES 96
5 = SERIES SD (1/32 DIN)
7 = SERIES SD (1/16 DIN)
8 = SERIES 96/97
Controller/Limit 9 = SERIES SD6C/SD6L
Controller/Limit 0 = SERIES SD3C/SD3L
Controller/Limit Input
J = Type J thermocouple
K = Type K thermocouple
T = Type T thermocouple
R = RTD (2-wire)
Display
935
RX = Red
GX = Green
93/96/SD
RG = Red/Green (only color option
available on SD (1/32 DIN))
RR = Red/Red
GG = Green/Green (only available on
SERIES 93 and 96)
GR = Green/Red (only available on
SERIES 93 and 96)
Output Connector
1 = AMP Mate-’n’-Lok®
2 = Twist and lock
Line Voltage
1 = 120VÅ(ac) (light duty - 4A per zone; 8A total)
2 = 208/240VÅ(ac) (light duty - 4A per zone; 8A total)
3 = 120VÅ(ac) (heavy duty - 8A per zone; 16A total)
Control/Limit: Light Duty - 8A total; Heavy Duty - 12A total
C O N T R O L
C O N S O L E S
Quad Control Box
The quad series offers four zones of control in one compact
package. Watlow SERIES 935, 93, SD or 96 controls can be
utilized for each zone. Each zone utilizes a solid state relay
for longer heater life and a lower cost than other power
switching devices. The heater output connector can be
ordered as either an Amp Mate-’n’-Lok® or a twist and lock
connector.
Features
• Small foot print
• Pre-wired outputs
• Amp Mate-’n’-Lok® 2-pin or a twist and lock output
connection
• Miniature thermocouple connector
• Watlow SERIES 935. 93, SD or 96 controllers
• ON/OFF rocker switch
Specifications
Controllers
• Watlow SERIES 935 • Watlow SERIES 93
• Watlow SERIES SD • Watlow SERIES 96
Dimensions
• 114 mm H x 305 mm W x 191 mm D
(4.5 in. H x 12.0 in. W x 7.5 in. D)
Output Power Switching
• Utilizes solid state relays
• Output is powered through line cord
• 16 amp maximum load (4 amps per zone)
Mate-’n’-Lok® is a registered trademark of AMP Company.
DeviceNet™ is a trademark of the Open DeviceNet Vendors
Association.
Power Requirements
• 120VÅ(ac), +10 percent, -15 percent (NEMA 5-20 plug)
Sensor Input
• Factory selectable thermocouple
• Miniature thermocouple jack and plug
Output Configuration
• Factory selectable
Amp Mate-’n’-Lok® connector
A twist and lock connector
• Mating connector provided
Operating Environment
• 0 to 45˚C (32 to 113˚F)
• 0 to 90 percent RH, non-condensing
Weight
• 2.7 kg (6 lbs)
Ordering Information
Quad Control Console
Q U A DControl
A = SERIES 96 w/ramp and soak
E = SERIES 96 w/EIA-485 comms
F = SERIES SD (1/16 DIN)
w/EIA-485 comms
G = SERIES SD (1/32 DIN)
w/EIA-485 comms
H = SERIES SD (1/16 DIN)
w/DevicNet™ on CAN
1 = SERIES 935
3 = SERIES 93
4 = SERIES 96
5 = SERIES SD (1/32 DIN)
7 = SERIES SD (1/16 DIN)
Input
J = Type J thermocouple
K = Type K thermocouple
T = Type T thermocouple
R = RTD (2-wire)
Display
935
RX = Red
GX = Green
93/96/SD
RG = Red/Green (only color option
available on SD (1/32 DIN))
RR = Red/Red
GG = Green/Green (only available on
SERIES 93 and 96)
GR = Green/Red (only available on
SERIES 93 and 96)
Output Connector
1 = AMP Mate-’n’-Lok®
2 = Twist and lock
Line Voltage
1 = 120VÅ(ac)
-
0 0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising