GSM Communicator

GSM Communicator
PSTN Alert To Wireless
Alert!
Compatible With Most Of The
PSTN Security Control Panel.
Special Designed For Your
Existing PSTN Alarms
Systems!
GSM Communicator
PSTN SIA DC-05 Protocol to SIA DC-09 Protocol & SMS Alert
User Manual
Ver 1.0
Model: K5
Date Issued: 2016-02-21
All rights reserved by King Pigeon Communication. Co., Ltd.
www.GsmAlarmSystem.com
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
Table of Contents
1. The Introduction. .................................................................................................................................................... 3
2. The Specifications. ................................................................................................................................................. 3
3. The Features........................................................................................................................................................... 3
4. The Standard Package. ......................................................................................................................................... 4
5. The Overview of Main Panel. ............................................................................................................................... 4
6. The Indicator Lights. .............................................................................................................................................. 5
7. The Connection. ..................................................................................................................................................... 5
8. The Installations ..................................................................................................................................................... 5
8.1 Install the USB Driver on PC. ........................................................................................ 5
8.2. Install the USB Driver on PC. ....................................................................................... 6
8.3. Settings in PC Configurator. ......................................................................................... 6
8.3.1 The Menu Bar of the PC configurator. ........................................................................................... 7
8.3.2 GPRS data Parameter Setting........................................................................................................ 7
8.3.3 The Phone Numbers for Events Notification. ............................................................................... 7
8.3.4 Set the Password and PIN Code Verification. .............................................................................. 8
8.3.5 Set the OC Outputs Names ............................................................................................................ 8
8.3.6 Set the CMS Server IP address and Server Port. ....................................................................... 8
8.3.7 The other buttons in PC configurator. ............................................................................................ 8
8.3.8 Set the SMS Notification Contents................................................................................................. 9
8.3.9 Engineer Debug for GPRS Data Transmission. ........................................................................... 9
9. The SMS Commands. ......................................................................................................................................... 10
10. Warranty. ............................................................................................................................................................. 12
This handbook has been designed as a guide to the installation and operation of GSM Communicator.
Statements contained in the handbook are general guidelines only and in no way are designed to supersede the instructions contained
with other products. We recommend that the advice of a registered electrician be sought before any Installation work commences.
King Pigeon Communication Co., Ltd, its employees and distributors, accept no liability for any loss or damage including consequential
damage due to reliance on any material contained in this handbook.
King Pigeon Communication Co., Ltd, its employees and distributors, accept no liability for GSM Network upgrading or SIM Card
upgrading due to the technology specifications contained in this handbook.
Safe Startup
Do not use GSM unit when using GSM equipment is prohibited or might bring disturbance or danger.
Interference
All wireless equipment might interfere network signals of GSM unit and influence its performance.
Page 2 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
1. The Introduction.
The GSM Communicator K5 is specially designed for your existing alarm systems. It’s compatible with the
majority of Security Manufacturers' Control Panels.
The GSM Communicator K5 can transfer the Alert Message from your PSTN Contact ID (SIA DC-05) Control
panel into SIA DC-09 protocol and SMS notification over GPRS network. It could change the way of alert
notification from traditional PSTN alert to wireless alert (SIA standard DC-09 requirements).
( Notice:
The ‘K5’ will be written in the following contents below instead of ‘GSM Communicator K5’)
2. The Specifications.
GSM Frequency
850 / 900 / 1800 / 1900 MHz
GSM Communication Ways
TCP/IP via GPRS
Message Transmission Protocols
SIA DC-09-2007 or SIA DC-09-2012 (K5)
SIA DC-05 (PSTN Control Panel)
OUT1, OUT2 ,OC type, commutates voltage of up to 30 V and
Outputs
direct current of up to 1 A
Configuration
via USB port or SMS commands
Power Supply
DC 9V ---24 V
Used Current
10 ---30 mA (on standby),
up to 70 mA (while sending data)
Temperature from -10C to +50C,
Workplace
Relative humidity up to 80 % when +20 C
Backup battery
900mAH
Exterior dimension
130 mm * 74 mm * 27 mm (W*D*H)
3. The Features.

Easy programmed by PC configurator, compatible with most Control Panels,

Supports transferring data by PSTN or GPRS, SMS ( no phone call ),

Supports 2 different CMS centers (IP addresses or DNS server).

SMS notification when the connection with the CMS center is failed (3 trial times).

When the PSTN network is failed, it will send the alert message to the center by GPRS network,

When the PSTN network is good, then it will not use GPRS network for transferring alert message,

5 users to receive SMS notification on Alarm, Supervision, Trouble, By pass, Test, GPRS fail, DC loss,

SMS commands to check the device version, IMEI code, GSM signal,
Page 3 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter

2 OC outputs which could be controlled by SMS commands.

Support firmware upgrading via USB.

Supports PIN code verification in PC configurator.

Remote configuration by SMS commands.

Backup rechargeable battery, with DC power failure SMS alert.
4. The Standard Package.
Main Panel x 1 piece,
CD (User Manual & PC Configurator) x 1 piece
5. The Overview of Main Panel.
GSM Antenna
GSM Signal
Power Signal
GPRS Signal
Power Supply
USB Port for PC Configurator.
T1: Connect with the ‘TLP’ in PSTN control panel
R1: Connect with the ‘RING’ in PSTN control panel
T2: Connect with the Land Line
R2: Connect with the Land Line
(Notice: No connection means the control panel will transmit the message only via GPRS.)
OUT1: 1st Outputs, OC type.
COM: General terminal.
OUT2: 2nd Outputs, OC type.
Page 4 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
6. The Indicator Lights.
[RED]: GMS Indicator, blinking every 0.5s means registering the network, when the GSM signal is
normal, it will keep blinking every 1s.
[RED]: Power Supply Indicator, blinking every 1s means the battery is on charge, the ON means
the battery is in full charge, OFF means Disconnection with the external power adapter.
[RED]: GPRS Data Indicator, it will keep blinking every 1s when K5 is transferring GPRS data.
7. The Connection.
8. The Installations
Notice: There are 2 ways for settings: PC configuration & SMS commands. Please install the USB Driver
before using the PC confirgurator.
8.1 Install the USB Driver on PC.
1) Screw the GSM antenna,
2)
Open the cover on the back the K5 to find the SIM card holder, and insert the SIM card as below:
Firmware
Upgrading
Switch
Button
3)
Turn on the power supply and switch K5 on, and check the GSM Signal Indicator light to confirm the
SIM card in K5 is working well. please check the indicator lights details in 【6. The Indicator Lights】.
Page 5 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
8.2. Install the USB Driver on PC.
1)
2)
3)
Click HERE to download and install the latest USB Driver according to your PC operation system.
Connect the K5 to the Computer via USB cable,
Find the USB Serial Port as picture below. (This COM port number will be used in PC configurator).
8.3. Settings in PC Configurator.
Choose the USB Serial Port according to 【8.2. Install the USB Driver on PC.】, and click open Com , it
will come to the Basic Information window as below:
Notice: when the settings in current window is done, please click Save Settings to complete the configuration.
Connected successful Status
Page 6 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
8.3.1 The Menu Bar of the PC configurator.
Loading Profile
[Alt + L]: Load the setting profile that you have saved before
Save the Profile
[Alt + S]: Save the settings to the local
Recovery Factory Default
[Alt + R]: Reset the K5 device back to the factory
About
[Alt + A]: The information about the K5
Exit
[Alt + E]: Exit the PC configurator.
8.3.2 GPRS data Parameter Setting.
For EXAMPLE:
everywhere
esecure
secure
Notice: The example provided by Orange UK above is only for reference, please contact your local GSM operator for the
settings accordingly. If the local GSM Operator does not use APN anymore, please ignore the settings in this part.
8.3.3 The Phone Numbers for Events Notification.
Tel No. 1 – No. 5
The phone numbers for the SMS notification.
Alarm
Supervision
Trouble
Ademco® Contact ID Protocol Events Codes.
Open
ByPass
Test
GPRS Fail
The GPRS message transmission failure notification from K5 .
DC Loss
The external DC Power Loss notification from K5
Notice:
1)
Tick it stands for the phone numbers in the list will receive the SMS notification when the event occurred.
2)
Only for SMS notification, no voice communication.
3)
18676734714 is the phone number only for example. If the K5 can’t work, please add your country code in front of the
phone number.
Page 7 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
8.3.4 Set the Password and PIN Code Verification.
Notice:
The ‘’K5 Password’’ is the password for the setting
of 【9. The SMS Commands.】.
8.3.5 Set the OC Outputs Names
The name of the 1st Output, default: DO1
The name of the 2nd Output, default: DO2
Alarm Host PSTN Protocol: SIA DC-05.
GPRS Protocol: SIA DC-09-2007/2012.
Notice:
The max characters for the Output Name is 40, these names will be displayed in the SMS notifications.
8.3.6 Set the CMS Server IP address and Server Port.
Notice:
The alert messages will be transmitted to
both of these 2 CMS severs if both of them
are set.
8.3.7 The other buttons in PC configurator.
open Com
Open the USB serial Com Port.
Close Com
When it displayed, it means successful connection.
Read Versiona Info
Read the device model, IMEI Code, Version.
Read settings
Read the existed setting data in the K5.
Save Settings
Click this button to complete the current settings.
Delete Settings
Delete all the setting data in K5.
Clear Display
Clear the words displayed in the current windows (The existed settings will not be cleared).
Clear Received Data
Clear the data K5 have received in the current window.
Clear Sent Data
Clear the data K5 have send in the current window.
Stop Debug
Stop the debug.
Notice: There are three different windows in PC configurator: Basic Information , SMS Message , GPRS Debug .Please click the
Save Settings when the setting data in the current windows is completed.
Page 8 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
8.3.8 Set the SMS Notification Contents.
Partition
Please set it according to your PSTN control panel.
( 2 digits, from 0 - 9, B – F )
Zone (64 zones)
Please set it according to your PSTN control panel.
( 3 digits, from 0 - 9, B – F )
SMS Text Message
It is the SMS alert content when the zone in the PSTN control panel is triggered, the.
(Max 59 characters)
Notice: if this part is not set, the SMS Alert Message will be in SIA DC-05 code, not understandable.
8.3.9 Engineer Debug for GPRS Data Transmission.
Page 9 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
9. The SMS Commands.
The SMS commands below are send to the SIM card of K5 for remote configuration, and the SMS
commands are only used when you are not able to program the K5 by the PC configurator.
Notice:
1) All the letters in SMS commands must be CAPITALIZED under the English format.
2) The Examples below are only for reference, please send the SMS commands according to your actual situations.
3) The Password below is the default password (1234), please use the new password in the SMS commands when the
default password was changed.
1) when the wrong SMS commands was send:
SMS Commands
Return SMS Message
SMS Format Error, Please check Caps Lock in Command!
Notice: If any SMS command with the wrong format was send, you will receive a SMS notification as above.
2) When the external DC Power loss/Recovery
Return SMS Message
DC Loss
External DC Power Goes OFF
DC Recovery
External DC Power Goes ON
3) Change the password (The default password is 1234, with 4 digits):
SMS Commands
Return SMS Message
Old Password+P+New Password
【New Password】,This is the New Password, please remember it carefully.
For Examples: 1234P4321
【4321】,This is the New Password, please remember it carefully.
Notice: When the password was forgot, please reset the device from the PC configurator.
4) Inquiry the device information remotely
SMS Commands
Return SMS Message
Model:
Version:
Password+EE
IMEI:
GSM Signal Value:
Model: K5
Version: V 1.00 2015-12
For Examples: 1234EE
IMEI: 867965029050313
GSM Signal Value: 30
Notice:
1)
Every K5 has a unique IMEI code for firmware upgrading.
2)
The GSM Signal Value range: 1~31.99, Signal weak value: <16.
Page 10 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
5) Program the 5 mobile phone numbers (the max is 23 digits) for SMS notification.
Actions
SMS Commands
Return SMS Message
Tel1: ---
Set Mobile Phone Numbers
Password+A+Serial Number +T+ Phone Number
For Example: 1234A3T13570810254
Tel2: --Tel3: 13570810254
Tel4: --Tel5: ---
Inquiry the whole numbers list
The list of the exiting numbers
Password +A
For Example: 1234A
Delete the phone number in the
Password+A+Serial Number
existing numbers list
For Example: 1234A3
The list of the exiting numbers
Notice:
1)
The Serial Number: 1 ~ 5.
2)
These mobile phone numbers are ONLY used for the SMS notification, no voice notification.
3)
It makes no difference for adding country code or not in front of the mobile phone numbers.
6) Program the OC Outputs
Actions
SMS Comands
Return SMS Message
Set the name of the OC outputs
Password+DO+Serial Number+T+the name
DO1: rename: xxxx
For example: 1234DO1TOutput 1 for Arm.
Example: DO1: rename: Output
1 for Arm.
Inquiry the name of the OC
Password+DO+Serial Number
outputs
For example: 1234DO1
Delete the name of the OC outputs
Password+DO+Serial Number+DEL
DO1: Output 1 for Arm
DO1: Output 1 for Arm
For example:1234DO1DEL
Switch the relay on
DO1: ON
Password+DOC+Serial Number
DO2:ON
For example:1234DOC12
st
nd
It means switch on both the 1 output and 2 output
(The serial number is 1 or 2 or both)
Switch the relay off
DO1: OFF
Password+DOO+Serial Number
DO2:OFF
For example:1234DOO12
st
nd
It means switch off both the 1 output and 2 output
Or both. (The serial number is 1 or 2 or both)
Inquiry all the current status
Password+DOE
DO1: ON/OFF
For example:1234DOE
DO2:ON/OFF
---
Notice:
1.
The Serial Number: 1 means the 1st output, 2 means the 2nd output, 12 means both the 1st output and the 2nd output.
2.
The name of the outputs is 40 characters (Max.)
7) Program the GPRS IP Sever and the Port:
Actions
Settings
SMS Commands
Return SMS Message
Password+IP+ IP address +P+Port Number
Inquiry the settings
For example:1234IP183.12.162.70P4005
Server:
Password +IP
Port:
For example:1234IP
Page 11 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
GSM Communicator
PSTN _Alert_to_Wireless _Alert_Converter
Delete the exiting setting
Password+IP+DEL
For example:1234IPDEL
Notice:
Only the 1st server IP could be programmed via SMS commands, and please program the 2nd server IP via PC configurator.
More details please visit: 【8.3.6 Set the CMS Server IP address and Server Port.】
8) GPRS data Parameter Setting(APN/USER NAME/PASSWORD)
Actions
Settings
SMS Commands
Return SMS Message
Password+AP+APN;User Name;Password#
For example:1234APeverywhere;esecure;secure#
Inquiry the settings
Password+AP
For example:1234AP
Delete the exiting setting
APN:
User Name:
Password:
Password+APDEL
For example:1234APDEL
10. Warranty.
1) This system is warranted to be free of defects in material and workmanship for one year.
2) This warranty does not extend to any defect, malfunction or failure caused by abuse or misuse by the
Operating Instructions. In no event shall the manufacturer be liable for any alarm system altered by
purchasers.
The End!
King Pigeon Communication Co., Ltd.
Professional GSM/3G/WIFI Security Alarms Manufacturer and M2M Solution Provider since 2005.
www.GsmAlarmSystem.com
www.GSM-M2M.com
Page 12 of 12
King Pigeon Communication Co., Ltd.
Ver 1.0
Date: 20160221
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement