tDS-700 - ICP Deutschland GmbH
Features
■ Incorporates any RS-232/422/485 serial device in Ethernet
■ Includes a VxComm Driver for 32/64-bit Windows XP/2003/Vista/7
■ Supports pair-connection (serial-bridge, serial-tunnel) applications
■ Contains a 32-bit MCU that efficiently handles network traffic
■ 10/100 Base-TX Ethernet, RJ-45 x1
(Auto-negotiating, auto MDI/MDIX, LED Indicators)
■ Includes redundant power inputs: PoE and DC jack
■ Allows automatic RS-485 direction control
■ Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols
■ Supports UDP responder for device discovery
■ Allows easy firmware updates via the Ethernet
■ Contains a tiny Web server for configuration
■ Male DB-9 or terminal block connector for easy wiring
■ Tiny form-factor and low power consumption
■ RoHS compliant with no Halogen
■ Made from fire retardant materials (UL94-V0 Level)
■ Cost-effective Device Servers
tDS-700
Tiny Serial-to-Ethernet device server
Introduction
The tDS-700 is a series of Serial-to-Ethernet device servers that are
designed to add Ethernet and Internet connectivity to any RS-232 and
RS-422/485 device, and to eliminate the cable length limitation of legacy
serial communication. By using the VxComm Driver/Utility, the built-in
COM port of the tDS-700 series can be virtualized to a standard PC
COM port in Windows. Therefore, users can transparently access or
monitor serial devices over the Internet/Ethernet without software
modification.
The VxComm Driver/Utility supports the most popular operating system in the world, including 32-bit and 64-bit Windows
7/Vista/2008/2003/XP. The virtual COM works transparently and is protocol independent, enabling perfect integration with
your current central computer. The utility provides an easy configuration interface that can be used to quickly create and
map virtual COM ports to one or several tDS-700 modules. In addition, the utility contains a built-in terminal program, so
users can send/receive command/data via the terminal program for easy testing.
The tDS-700 device servers can be used to create a pair-connection application
(as well as serial-bridge or serial-tunnel), and can then route data over TCP/IP
between two serial devices, which is useful when connecting mainframe
computers, servers or other serial devices that do not themselves have Ethernet
capability. By virtue of its protocol independence and flexibility, the tDS-700
meets the demands of virtually any network-enabled application.
DHCP minimizes configuration errors caused by manual IP address
configuration, such as address conflicts caused by the assignment of an IP
address to more than one computer or device at the same time. The tDS-700
supports the DHCP client function, which allows the tDS-700 to easily obtain the
necessary TCP/IP configuration information from a DHCP server. The tDS-700
also contains a UDP responder that transmits its IP address information in
response to a UDP search from the VxComm Utility, making local management
more efficient.
ICP Deutschland GmbH
|
+49(0)7121-14323-20
|
sales@icp-deutschland.de
|
www.icp-deutschland.de
The tDS-700 features a powerful 32-bit MCU to
enable efficient handling of network traffic. It also
has a built-in web server that provides an
intuitive web management interface to allow
users to modify the settings of the module,
including DHCP/Static IP, gateway/mask and
serial ports.
Based on an amazing tiny form-factor, the tDS700 achieves the maximum space savings that
allows it to be easily installed anywhere, even
directly attached to a serial device or embedded
into a machine.
The tDS-700 series also contains a built-in CPU watchdog, which automatically resets the CPU if the built-in firmware is
operating abnormally, or if there is no communication between the tDS-700 and the host for a predefined period of time
(system timeout). This is an important feature that ensures the tDS-700 operates continuously, even in harsh
environments.
The tDS-700 offers true IEEE 802.3af-compliant (classification, Class 1) Power over
Ethernet (PoE) functionality using a standard category 5 Ethernet cable to receive power
from a PoE switch such as the NS-205PSE. If there is no PoE switch on site, the tDS-700
will also accept power input from a DC adapter. The tDS-700 is designed for ultra-low
power consumption, reducing hidden costs from increasing fuel and electricity prices,
especially when you have a huge amount of device servers installed. Reducing the amount
of electricity consumed by choosing energy-efficient equipment can have a positive impact
on maintaining a green environment.
The tDS-712 is equipped with a male DB-9 connector, while other models are equipped with a removable terminal block
connector to allow easy wiring, and also supports automatic RS-485 direction control when sending and receiving data.
The tDS-700 has the same basic Serial-to-Ethernet gateway and virtual COM functions as the PPDS-700-MTCP series,
as shown in the comparison table below.
tDS-700 Series
10/100 M, PoE
Yes
Yes
Yes
Yes
Cost-effective
Ethernet
Programmable
Virtual COM
Virtual I/O
DHCP
Web Configuration
UDP Search
Modbus Gateway
Multi-client
Remarks
PPDS-700-MTCP Series
10/100 M, PoE
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-
Applications
■ Factory Automation
■ Building Automation
■ Home Automation
■ Remote Diagnosis and Management
ICP Deutschland GmbH
|
+49(0)7121-14323-20
|
sales@icp-deutschland.de
|
www.icp-deutschland.de
Specifications
Model
tDS-712
System
32-bit MCU
CPU
Communication Interface
tDS-722
tDS-732
tDS-715
tDS-725
tDS-735
tDS-718
2-wire RS-485
2-wire RS-485
4-wire RS-422
Ethernet
10/100 Base-TX, 8-pin RJ-45 x 1,
(Auto-negotiating, Auto-MDI/MDIX, LED indicator)
PoE (IEEE 802.3af, Class 1)
COM1
5-wire RS-232
5-wireRS-232
3-wire RS-232
2-wire RS-485
4-wire RS-422
2-wire RS-485
COM2
COM3
Self-Tuner
UART
COM Port Format
Baud Rate
Data Bit
Parity
Stop Bit
General
-
5-wire RS-232
3-wire RS-232
-
2-wire RS-485
2-wire RS-485
-
-
-
3-wire RS-232
-
-
2-wire RS-485
-
-
115200 bps Max.
5, 6, 7, 8
None, Odd, Even, Mark, Space
1, 2
Power Consumption
Connector
Mounting
Flammability
Operating
Temperature
Storage
Temperature
Humidity
RS-232:
RS-232:
RS-485:
RS-422:
Yes, automatic RS-485 direction control
16c550 or compatible
Power Input
3-Wire
5-Wire
2-Wire
4-Wire
3-wire RS-232
PoE: IEEE 802.3af, Class 1
DC jack: +12 ~ 48 VDC
0.05 A @ 24 VDC
Male DB-9 x1
10-Pin Removable Terminal Block x 1
DIN-Rail
Fire Retardant Materials (UL94-V0 Level)
-25° ~ 75°C
-30° ~ 80°C
10 ~ 90% RH, non-condensing
RxD, TxD, GND (Non-isolated)
RxD, TxD, CTS, RTS, GND (No-isolated)
DATA+, DATA-, GND (Non-isolated)
TxD+, TxD-, RxD+, RxD-, GND (Non-islated)
Pin Assignments
tDS-712
7
RTS1
RTS2
7
RxD2
6
TxD2
5
GND
4
CTS1
3
TxD1
3
RTS1
RxD1
1
N/A
ICP Deutschland GmbH
|
2
RxD1
1
TxD1
COM1
2
RxD3
7
TxD3
6
GND
5
RxD2
4
TxD2
3
GND
2
RxD1
1
TxD1
+49(0)7121-14323-20
4
RxD1-
3
RxD1+
2
TxD1-/
D1-
1
|
TxD1+/
D1+
9
N/A
8
N/A
7
6
5
N/A
GND
D2-
4
D2+
3
GND
2
D1-
1
D1+
sales@icp-deutschland.de
|
COM1
N/A
8
COM1
4
GND
RS-485/RS-422
GND
COM2
N/A
5
COM1
6
9
tDS-725
10
F.G.
tDS-735
10
F.G.
9
GND
8
D3-
7
D3+
6
5
GND
D2-
4
D2+
3
2
GND
D1-
1
D1+
tDS-718
10
F.G.
9
N/A
8
GND
7
RxD1
TxD1
6
RS-485/RS-422
CTS2
8
tDS-715
10
F.G.
9
N/A
8
N/A
7
N/A
6
N/A
5
GND
COM2
9
F.G.
CoM2
10
RS-232
CTS1
tDS-732
F.G.
COM3
8
tDS-722
10
COM3
N/A
COM2
COM1 (Male DB-9)
9
www.icp-deutschland.de
5
4
3
2
1
GND
RxD1RxD1+
TxD1-/
D1TxD1+/
D1+
Dimensions (Unit: mm)
tDS-712
Top View
Left Side View
Front View
Right Side View
Back View
Bottom View
tDS-722/732/715/725/735/718
Top View
Left Side View
Front View
Right Side View
Back View
Bottom View
Ordering Information
tDS-712
tDS-722
tDS-732
tDS-715
tDS-725
tDS-735
tDS-718
CR
CR
CR
CR
CR
CR
CR
Tiny
Tiny
Tiny
Tiny
Tiny
Tiny
Tiny
Device
Device
Device
Device
Device
Device
Device
Server
Server
Server
Server
Server
Server
Server
with
with
with
with
with
with
with
PoE
PoE
PoE
PoE
PoE
PoE
PoE
and
and
and
and
and
and
and
1
2
3
1
2
3
1
RS-232 Port (RoHS)
RS-232 Ports (RoHS)
RS-232 Ports (RoHS)
RS-422/485 Port (RoHS)
RS-485 Ports (RoHS)
RS-485 Ports (RoHS)
RS-232/422/485 Port (RoHS)
Accessories
CA-0915
CA-0910F
CA-0910N
CA-PC09F
NS-205 CR
NS-205PSE CR
Male DB-9 to Female DB-9 Cable, 1.5 m
Female DB-9 to Female DB-9 Cable, 1.0 m
DB-9 Female-Female 3-wire Null Modem Cable, 1M
DB-9 Female connector with plastic cover
Unmanaged 5-Port Industrial Ethernet Switch (RoHS)
Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
Available soon
12 V/0.58 A (max) Power Supply.
FRA05-S12-SU
Available Soon !!
CA-0915
CA-0910F
ICP Deutschland GmbH
|
CA-0910N
+49(0)7121-14323-20
CA-PC09F
|
NS-205PSE CR
NS-205 CR
sales@icp-deutschland.de
|
FRA05-S12-SU
www.icp-deutschland.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising