ASM Airless Spray Equipment Product Brochure

ASM Airless Spray Equipment Product Brochure
A Division of Graco®
Pantone 187
Pantone 116
Airless Spray Equipment
Tackle Any Job With Confidence!
Featuring a full line of Airless Paint Sprayers, Heavy-Duty
Pressure Washers, Texture Sprayers, and Accessories.
Power Application Equipment For The Painting Industry
AIRLESS SPRAY EQUIPMENT
Table of Contents
Page 1 . . . . . . . . . . . . . . . . . . . . . . . .
Page 2 . . . . . . . . . . . . . . . . . . . . . . . .
Page 3 . . . . . . . . . . . . . . . . . . . . . . . .
Page 4 . . . . . . . . . . . . . . . . . . . . . . . .
Page 5 . . . . . . . . . . . . . . . . . . . . . . . .
Page 6 . . . . . . . . . . . . . . . . . . . . . . . .
Page 7 . . . . . . . . . . . . . . . . . . . . . . . .
Page 8 . . . . . . . . . . . . . . . . . . . . . . . .
Page 9 . . . . . . . . . . . . . . . . . . . . . . . .
Page 10 . . . . . . . . . . . . . . . . . . . . . . .
Page 11 . . . . . . . . . . . . . . . . . . . . . . .
Page 12 . . . . . . . . . . . . . . . . . . . . . . .
Page 13 . . . . . . . . . . . . . . . . . . . . . . .
Page 14 . . . . . . . . . . . . . . . . . . . . . . .
Page 15 . . . . . . . . . . . . . . . . . . . . . . .
Page 16 . . . . . . . . . . . . . . . . . . . . . . .
Page 17 . . . . . . . . . . . . . . . . . . . . . . .
Page 18 . . . . . . . . . . . . . . . . . . . . . . .
Page 19 . . . . . . . . . . . . . . . . . . . . . . .
Page 20 . . . . . . . . . . . . . . . . . . . . . . .
Page 21 . . . . . . . . . . . . . . . . . . . . . . .
Why Airless Spray - Selection Chart
Zip Spray™ ESP, 1700, 2100 Plus
Zip Spray 2300 Plus, 2700 Plus, 3100 Plus
Zip Spray 3600 G Plus & Accessories
Airless Accessories - Guns
Airless Accessories - Pressure Rollers, Mini Poles
Airless Accessories - Maxi Poles, Gun Filters, Repair Kits, AngleHead™ & Fittings
Tip Selection Guide Reversible Tip
Tip Selection Guide Standard Reversible Uni-Tip™, Striping & Fine Finish
Super Zip™ Tip Selection Guide
Flat Tip Selection Guide
Texture Application Guide
Texture Intro - Zip-Tex™ 650
Texture Zip-Tex 900, ASM Professional Contractor Hopper Gun
Texture Hopper, Accessories & Replacement Parts
Pressure Washers - Zip Clean™ 2525
Pressure Washers - Zip Clean 2730, 3030 & Accessories
Fluids
Merchandising Displays
Electric Airless Product Specifications & Comparison Guide
Gas Engine Airless Product Specifications, Zip-Tex Units,
Pressure Washers & Comparison Guide
AIRLESS SPRAY EQUIPMENT
ASM MAKES PROJECTS A ZIP!
For use with a variety of coatings including stains, enamels, interior/exterior latex and oil-based paints.
EASIER! Professional results made easy!
Uniform and professional results are now a zip! ASM’s Zip-Spray Airless Sprayers & Texture Units produce a high-quality finish on every
job they tackle!
FASTER! Finish large projects fast!
ASM’s Zip-Spray Airless Sprayers are up to 10X faster than brushing and 4 times faster than traditional rolling. Save time and increase
your productivity.
AFFORDABLE! Save Money!
ASM’s Zip-Spray Airless Sprayers & Texture Units pay for themselves in just over one project.
• Enjoy increased productivity and finish the job fast
• Contractors save money by reducing both on-the-job time and down time
• Save money on paint with professional coverage and a smooth finish every time
Why Airless Spray?
Airless spray is 10 times faster than brushing, and 4 times faster than traditional rolling. Airless spray provides even material coverage on
all types of surfaces. You can spray most common coatings, including stains, latex, and oil-based paints. And best of all, airless spray saves
you money!
Zip-Spray airless spray systems are designed to save time by increasing your productivity and reducing downtime. They are durable, perfect
for rugged job site conditions. They are easy to operate and transport for convenience as you work. And you’ll find that Zip-Spray airless
sprayers still offer the innovation and value you’ve come to expect from ASM.
™
Airless Equipment Selection Chart
Highest Operating Pressure Zip-Spray ESP
Zip-Spray 1700
Zip-Spray 2100 PLUS
Zip-Spray 2300 PLUS
Zip-Spray 2700 PLUS
Zip-Spray 3100 PLUS
Delivery Rating
Max Tip Size Supported
Recommended Annual Use
2800 psi.24 gpm (.91 lpm) .015 in (.381 mm)
(19.3 MPa, 193 bar)
Roll: 1000 gal (3785 L)
Spray: 175 gal (662 L) Varnish, Enamels, Primers,
Light-Duty
Interior/Exterior Latex
3000 psi.31 gpm (1.17 lpm) .017 in (.432 mm)
(20.7 MPa, 207 bar)
Roll: 1500 gal (5678 L)
Spray: 300 gal (1135 L)
Varnish, Enamels, Primers,
Interior/Exterior Latex
Medium-Duty
3300 psi.47 gpm (1.8 lpm) .021 in (.483 mm)
1000 gal (3785 L)
(20.7 MPa, 207 bar)
Varnish, Enamels, Primers,
Interior/Exterior Latex
Heavy-Duty
3300 psi.54 gpm (2.0 lpm) .023 in (.584 mm)
1250 gal (4732 L)
(22.7 MPa, 227 bar)
Varnish, Enamels, Primers,
Interior/Exterior Latex & Heavier Bodied Latex
Heavy-Duty
3300 psi.86 gpm (3.25 lpm) .027 in (.686 mm)
1500 gal (5678 L)
(22.7 MPa, 227 bar)
Varnish, Enamels, Primers,
Interior/Exterior Latex & Heavier Bodied Latex
Pro-Duty
3300 psi
1.1 gpm (4.2 lpm) .031 in (.787 mm)
1500 gal (5678 L)
(22.7 MPa, 227 bar)
Varnish, Enamels, Primers,
Interior/Exterior Latex & Heavier Bodied Latex
Pro-Duty
Block Fillers & Elastomerics, Enamels, Primers,
Interior/Exterior Latex & Heavier Bodied Latex
Pro-Duty
Zip-Spray 3600 G PLUS 3300 psi
1.25 gpm (4.7 lpm) .036 in (.912 mm)
1500 gal (5678 L)
(22.7 MPa, 227 bar)
1
Typical Coatings
Ideal
Users
AIRLESS SPRAY EQUIPMENT
Zip-Spray ESP
Light-Duty Electric Airless Sprayer
The Zip-Spray ESP offers convenience, durability, and value for tradesmen with occasional painting needs,
homeowners, and do-it-yourselfers. Ideal for use with paint spraying and paint pressure rolling applications
(pressure roller kit sold separately).
Zip-Flush™ Cleaning
• Connect to a garden hose and clean the pump,
hoses, and gun in minutes!
Simple Piston Design
• For reliable performance and long life
• Max tip supported .015
Lightweight Design
• Portable and easy to store. Weighs only 13 lbs (5.9 kg)
• 4-legged stand is durable and stable
Includes:
• ASM 200 Contractor Spray Gun with
4-Finger Trigger
• 515 Uni-Tip with Uni-Tip Hand-Tight™ Base
• 1/4 in x 25 ft (6.4 mm x 7.5 m), 3300 psi
(22.7 MPa, 227 bar) airless paint hose
• Pump Life™ Protectant Fluid
Demand Delivery System
• Pump runs only when gun trigger is activated,
reducing sprayer wear
• Draws from a 1 or 5 gallon container
Part# 248772
UPC# 769946084481
Zip-Spray 1700
Medium-Duty Electric Airless Sprayer
The Zip-Spray 1700 is ideal for moderate spraying needs, including property maintenance, remodeling, and
light commercial projects.
Zip-Flush Cleaning
• Connect to a garden hose and clean the pump,
hoses, and gun in minutes!
• Pump lower is modular design for easy repair
and maintenance
Durable Piston Pump
• Stainless steel pump resists corrosion for long life
• Modular piston is removable for easy quick repair
and replacement
• Max tip supported .017
Easy to transport and store
• Rugged cart with fold-down handle and 75 ft
(23 m) capacity hose rack is maneuverable and
convenient to store
• Pail hook holds paint bucket for easy transport
on job site and reduces spilling
Includes:
• 500 Series Contractor Spray Gun with
2-Finger Trigger
• 517 Uni-Tip with Uni-Tip Hand-Tight Base
• 1/4 in x 50 ft (6.4 mm x 15 m), 3300 psi
(22.7 MPa, 227 bar) airless paint hose
• Pump Life Protectant Fluid
Modular Displacement Pump
Part# 245569
Part# 233789
UPC# 769946075632
Part# 247482
UPC# 769946090048
Part# 247485
UPC# 769946090055
Zip-Spray 2100 Plus
Heavy-Duty Electric Airless Sprayer
The Zip-Spray 2100 Plus is great for contractors, property owners, handymen, and remodelers with frequent
spraying needs.
Industry-Proven Hardened Chrome and Stainless Steel Piston Pump
Outlasts competitive pumps by 65%.
Durable Piston Pump
• Double-Acting - pumps paint on both the up and
the down stroke for consistent delivery
• Long-Lasting Packings - Ultra high molecular weight
polyethylene (UHMWPE) construction
• Wiper Ring Packing - Wipes the inside of the pump
clean, extending life up to 50%
• Rotating Ball Checks - Maximize component life by
eliminating wear on a single surface
• Trouble free electro-mechanical pressure control for
smooth spraying.
• Max tip supported .021
• Pump lower knocks off using only a hammer
for easy repair and maintenance
• Reliable DC motor
• Long extension cords can be used
Includes:
• 500 Series Contractor Spray Gun with
2-Finger Trigger
• 517 Uni-Tip with Uni-Tip Hand-Tight Base
• 1/4 in x 50 ft (6.4 mm x 15 m), 3300 psi
(22.7 MPa, 227 bar) airless paint hose
• Pump Life Protectant Fluid, Packing Seal™
2
AIRLESS SPRAY EQUIPMENT
Zip-Spray 2300 Plus
Heavy-Duty Electric Airless Sprayer
The Zip-Spray 2300 Plus is perfect for professionals who spray 3-5 times a week for most painting applications.
Heavy-Duty Piston Pump
• Pump lower knocks off easily for convenient
maintenance and repair
• Max tip supported .023
Electronic Pressure Control
• Trouble free electro-mechanical variable speed
pressure control for smooth spraying.
Fan-Cooled DC Motor
• Run longer extension cord
Full-Flow Manifold Filter
• Filter screen comes out with the cap for less mess
• Full-flow design flushes completely and cleans
up quickly
• Reduces tip clogs and improves finish
Welded Steel-Chrome Plated Cart
• Features a retractable handle
Includes
• 500 Series Contractor Gun with 2-Finger Trigger
• 517 Uni-Tip with Uni-Tip Hand-Tight base
• 1/4 in x 50 ft (6.4 mm x 15 m) 3300 psi
(22.7 MPa, 227 bar) airless paint hose
• Pump Life Protectant Fluid, Packing Seal
Part# 247531
UPC# 769946090062
Zip-Spray 2700 Plus
Pro-Duty Electric Airless Sprayer
The Zip-Spray 2700 Plus is designed for professional contractors in many applications, from residential
to commercial. Supports 2 guns.
Heavy-Duty Piston Pump
• Pump lower knocks off easily for convenient
maintenance and repair
• Max tip supported .027
Electronic Pressure Control
• Maintains consistent fan pattern for a better finish
Enclosed Design, Fan-Cooled Brushless
DC Motor
• Major components are protected from dirt, dust,
and overspray
• Run longer extension cord
Full-Flow Manifold Filter
• Filter screen comes out with the cap for less mess
• Full-flow design flushes completely and cleans
up quickly
• Reduces tip clogs and improves finish
Welded Steel-Chrome Plated Cart
• Features a retractable handle
Includes
• 500 Series Contractor Gun with 2-Finger Trigger
• 517 Uni-Tip with Uni-Tip Hand-Tight base
• 1/4 in x 50 ft (6.4 mm x 15 m) 3300 psi
(22.7 MPa, 227 bar) airless paint hose
• Pump Life Protectant Fluid, Packing Seal
Part# 247558
UPC# 769946090147
Zip-Spray 3100 Plus
Pro-Duty Electric Airless Sprayer
The Zip-Spray 3100 Plus is designed for professional contractors in many applications, from residential to
commercial including some block filler and elastomerics. Supports 2 guns.
Heavy-Duty Piston Pump
• Pump lower knocks off easily for convenient
maintenance and repair
• Max tip supported .031
Electronic Pressure Control
• Maintains consistent fan pattern for a better finish
Enclosed Design, Fan-Cooled Brushless
DC Motor
• Major components are protected from dirt, dust,
and overspray
• Run longer extension cord
Full-Flow Manifold Filter
• Filter screen comes out with the cap for less mess
• Full-flow design flushes completely and cleans
up quickly
• Reduces tip clogs and improves finish
Welded Steel-Chrome Plated Cart
• Features a retractable handle
Includes
• 500 Series Contractor Gun with 2-Finger Trigger
• 517 Uni-Tip with Uni-Tip Hand-Tight base
• 1/4 in x 50 ft (6.4 mm x 15 m) 3300 psi
(22.7 Mpa, 227 bar) airless paint hose
• Pump Life Protectant Fluid, Packing Seal
3
Part# 247559
UPC# 769946090123
AIRLESS SPRAY EQUIPMENT
Zip-Spray 3600 G Plus
Pro-Duty Gas Mechanical Airless Sprayer Complete
The Zip-Spray 3600 G Plus is perfect for professional painting contractors who demand high output and
portability where electricity is unavailable or inconvenient. Sprays architectural coatings, light block fillers
and light elastomerics. Supports up to 3 guns.
Full Flow Filter
• Cleans from the inside out
• Reduces tip clogs
Electronic Pressure Control
• Provides excellent spray pattern
• Superior spray finish
Honda power
• Highly reliable
• Portable Power
Drive System
• Heavy-duty clutch - Adjusts and aligns itself for long life
• Hardened gears - Durable and quiet operation
Heavy-Duty Chrome Over Steel Frame
• Rust resistant for long life
Heavy-Duty Pump
• Knocks off easily for convenient maintenance
• Long wearing rod
• Max tip supported .036
Drain Tube
• Safe, durable and built to last
Lift Handles
• One person loading and unloading
Includes
• 500 Series Contractor Gun with 2-Finger Trigger
• 517 Uni-Tip with Uni-Tip Hand-Tight base
• 1/4 in x 50 ft (6.4 mm x 15 m) 3300 psi
(22.7 MPa, 227 bar) airless paint hose
• Pump Life Protectant Fluid, Packing Seal
Part# 247560
UPC# 769946090161­
Accessories
Airless Hose
• 3300 psi (22.7 MPa, 227 bar) rating
• Swivel couplers and spring guards on both ends
• Can be coupled with other airless hose
• Female fitting ends.
Part # HSE1450
1/4 in (6.4 mm) x 50 ft (15 m)
3/8 in (9.5 mm) x 50 ft (15 m)
Part # HSE3850
1/4 in (6.4 mm) x 25 ft (7.5 m)
Part # 245449
Whip Hose
• Whip Hoses add flexibility and reduce operator fatigue
Part # HSE3163
3 ft (0.9 m) x 3/16 in (4.8 mm) (MXF)
Part # HSE3165
5 ft (1.5 m) x 3/16 in (4.8 mm) (MXF)
Gun Hose Kits
• 500 Series Contractor Gun with Uni-Tip, Hand-Tight Base, and
1/4 in (6.4 mm) x 50 ft (15 m) Airless Hose (“G” thread only)
Part # 256244
(4-Finger)
Part # 256245 (2-Finger)
• 400 Series Professional Gun with Uni-Tip, Uni-Tip Hand-Tight Base, and
1/4 in (6.4 mm) x 50 ft (15 m) Airless Hose
Part # 248249
(“G” thread only) (4-Finger)
Part # 248250
(“G” thread only) (2-Finger)
• 400 Series Professional Gun with Super-Zip, Hand-Tight Base and
1/4 in (6.4 mm) x 50 ft (15 m) Airless Hose
Part # 451-SHF (“F” thread), 451-SHG (“G” thread) (4-Finger)
Part # 456-SHF (“F” thread), 456-SHG (“G” thread) (2-Finger)
• 300 Series Contractor Gun with Super-Zip, Hand-Tight Base, and
1/4 in (6.4 mm) x 50 ft (15 m) Airless Hose
Part # 351-SHF (“F” thread), Part # 351-SHG (“G” thread) (4-Finger)
Part # 356-SHF (“F” thread), Part # 356-SHG (“G” thread) (2-Finger)
Gun & Hose Connectors
4
Part # 4410
Part # 4413
Part # 4414
Part # 162485
Part # 239663
3/8 in (npt) x 3/8 in (npt) MBE
1/4 in (npt) x 1/4 in (npt) Hex Nipple MBE
1/4 in (npt) x 3/8 in (npt) MBE
3/8 in (npt) x 3/8 in (npsm) MBE
1/4 in (npt)(M) x 1/4 in (npsm)(F) Swivel
Accessories
THREAD SIZE ON DIFFUSER “F” = 11/16 “G” = 7/8
500 Series Professional Airless Spray Gun
The ASM 500 Contractor Gun is new and designed for durability, spraying performance and a long life
• Lightweight gun with easy trigger pull
• Includes 517 Uni-Tip & Guard
• Heavy-duty swivel allows easy gun movement
• Split handle for easy filter removal
• Available “G” thread only
• Maximum working pressure 3600 psi (24.8 MPa, 248 bar)
Part # 289316
2-Finger Gun with Uni-Tip
Part # 288681
4-Finger Gun with Uni-Tip
Repair Kit # 288817
400 Series Professional Airless Spray Gun
• Improved! Life of the 400 Series gun before repair is equal to or better than that of competitive guns
• Heavy-duty swivel allows easy gun movement
• Anodized body resists corrosion
• Split handle for easy access to filter
• Includes 517 Uni-Tip & Guard
• Available with ”F” and “G” diffusers to match all systems
• Maximum working pressure 3600 psi (24.8 MPa, 248 bar)
Part # 248240
2-Finger Gun with Uni-Tip (“G” thread only)
Part # 456-SF, 456-SG
2-Finger Gun with Super-Zip
Part # 248239
4-Finger Gun with Uni-Tip (“G” thread only)
Part # 451-SF, 451-SG
4-Finger Gun with Super-Zip
Repair Kit # 4427-F, 4427-G
300 Series Professional Airless Spray Gun
• Improved! New needle design for reduced spitting and long life
• Includes 517 Uni-Tip
• Available with ”F” and “G” diffusers to match all systems
• Maximum working pressure 3600 psi (24.8 MPa, 248 bar)
Part # 248238
2-Finger Gun with Uni-Tip ("G" thread only)
Part # 356-SF, 356-SG
2-Finger Gun with Super-Zip Tip
Part # 248237
4-Finger Gun with Uni-Tip ("G" thread only)
Part # 351-SF, 351-SG
4-Finger Gun with Super-Zip Tip
Repair Kit # 3027-F, 3027-G
200 Series Airless Spray Gun
• Easy-access in-handle paint filter reduces tip clogging and improves finish
• Comfortable 4-Finger Trigger
• Ideal for small projects
• Includes 515 Uni-Tip & Guard
• Maximum working pressure 3600 psi (24.8 MPa, 248 bar)
Part # 251-U
4-Finger Gun with Uni-Tip
Part # 251-SG
4-Finger Gun with Super-Zip Tip
Not repairable
Combo Gun
• Well-balanced, lightweight, comfortable handle and trigger
• In-handle gun filter and internal trigger lock
• Add a Mini Pole or Maxi Pole for extra reach
Part # 248241
with 517 Uni-Tip and Uni-Tip Hand-Tight Base (“G” thread only)
Part # 6700-SF, 6700-SG
with 517 Super-Zip and Super-Zip Hand-Tight Base
Repair Kit # 6727-F, 6727-G
5
Accessories
Zip-Roll™ Pressure Roller
The Zip-Roll pressure roller accessory attaches and is fed paint from your airless pump allowing you to use your system to roll in areas where spraying is
not practical. Provides smooth, continuous delivery of paint to all types of surfaces. Just trigger gun to release paint to roller. Pressure rolling is 4 times
faster than standard rolling!
• Extends reach – no need for a ladder
• Chrome-plated stainless steel frame provides rust resistance
and eliminates streaking
• Hand-Tight system for easy assembly – no tools required
• Convenient Zip-Clip holds roller cover securely on frame and quickly
releases for easy cleanup
• Few parts for quicker cleaning time
Zip-Roll Pressure Roller
Zip-Roll Pressure Roller
(Includes Combo Gun)
Wrench-Tight with Flat Guard
Wrench-Tight with Flat Guard
Hand-Tight with Zip Guard
Hand-Tight with Zip Guard
Hand-Tight with Super Zip Guard
Hand-Tight with Super Zip Guard
Zip-Roll Frame only 3 ft
Part # 970309(F)
Part # 970309(G)
Part # 980309(F)
Part # 980309(G)
Part # 980309(SG)
Part # 980309(SF)
Part # 244278
™
6 ft
Part # 970609(F)
Part # 970609(G)
Part # 980609(F)
Part # 980609(G)
Part # 980609(SG)
Part # 980609(SF)
Attaches to gun that comes with units.
Includes: 45˚ “G” thread gun adapter, 24 in. (61 cm) extension,
9 in (23 cm) roller frame & 1/2 in (13 cm) nap cover
Part # 287713
Zip-Roll Pressure Roller Covers
High-quality, all-purpose pressure roller covers. Available in a variety of naps.
Part # 7721
Smooth Surfaces – 9 in x 3/8 in (23 cm x .95 cm)
Part # 7722
Semi-Smooth Surfaces – 9 in x 1/2 in (23 cm x 1.27 cm)
Part # 7723
Medium Surfaces – 9 in x 3/4 in (23 cm x 1.90 cm)
Part # 7724
Rough Surfaces – 9 in x 1 1/4 in (23 cm x 3.18 cm)
Must be ordered in multiples of 6.
Zip-Roll Frame Only
Part # 244278
45º Swivel Fitting Kit
To be used between the gun and Heavy-Duty Extension
for pressure rolling. (“G” to “G” thread)
Part # 239531
Kit Includes (239531, 166969, 114049)
Mini Poles
• Durable stainless steel construction for rust resistance
• Hand-Tight system allows for easy attachment to gun, without tools
• Two or more poles can be combined for extended reach
• Available in 4 lengths and “F” and “G” thread sizes to fit all guns
• For spraying ceilings, overhangs, floors, and decks
3400 Series
With Uni-Tip Hand-Tight Base (“G” thread only)
6 in (15.2 cm) Part # 248233
12 in (30.5 cm) Part # 248234
18 in (45.7 cm) Part # 248235
24 in (61.0 cm) Part # 248236
3500 Series*(with Anglehead)
3400 Series
Mini Pole
With Uni-Tip Hand-Tight Base (“G” thread only)
6 in (15.2 cm) Part # 255258
12 in (30.5 cm) Part # 255259
18 in (45.7 cm) Part # 255260
24 in (61.0 cm) Part # 255261
3500 Series
Mini Pole
With Super-Zip Hand-Tight Base
6 in (15.2 cm) Part # 3406-SF
12 in (30.5 cm) Part # 3412-SF
18 in (45.7 cm) Part # 3418-SF
24 in (61.0 cm) Part # 3424-SF
Part # 3406-SG
Part # 3412-SG
Part # 3418-SG
Part # 3424-SG
With Super-Zip Hand-Tight Base
6 in (15.2 cm) Part # 3506-SF
12 in (30.5 cm) Part # 3512-SF
18 in (45.7 cm) Part # 3518-SF
24 in (61.0 cm) Part # 3524-SF
Part # 3506-SG
Part # 3512-SG
Part # 3518-SG
Part # 3524-SG
With Flat Tip Base Wrench Tight
6 in (15.2 cm) Part # 2406-F
12 in (30.5 cm) Part # 2412-F
18 in (45.7 cm) Part # 2418-F
24 in (61.0 cm) Part # 2424-F
Part # 2406-G
Part # 2412-G
Part # 2418-G
Part # 2424-G
With Flat Tip Base Wrench Tight
6 in (15.2 cm) Part # 2506-F
12 in (30.5 cm) Part # 2512-F
18 in (45.7 cm) Part # 2518-F
24 in (61.0 cm) Part # 2524-F
Part # 2506-G
Part # 2512-G
Part # 2518-G
Part # 2524-G
6
Accessories
Maxi Poles
Hand-Tight Maxi Poles accept Hand-Tight adapters and an additional Maxi Pole or Mini Pole for 12 ft maximum length.
• Includes Anglehead to adjust spray angle
• Available in “F” and “G” thread sizes to fit all guns
With Uni-Tip Hand-Tight Base (“G” thread only) With Super-Zip Hand-Tight Base
With Flat Tip Base
Part # 248242
2 ft (60.9 cm)
Part # 7402-SF, 7402-SG
2 ft (60.9 cm)
Part # 7302-F, 7302-G
Part # 248243
3 ft (91.4 cm)
Part # 7403-SF, 7403-SG
3 ft (91.4 cm)
Part # 7303-F, 7303-G
Part # 248244
4 ft (121.9 cm)
Part # 7404-SF, 7404-SG
4 ft (121.9 cm)
Part # 7304-F, 7304-G
Part # 248245
6 ft (182.9 cm)
Part # 7406-SF, 7406-SG
6 ft (182.9 cm)
Part # 7306-F, 7306-G
Part # 248246
9 ft (274.2 cm)
Part # 7409-SF, 7409-SG
9 ft (274.2 cm)
Part # 7309-F, 7309-G
TM
2 ft (60.9 cm)
3 ft (91.4 cm)
4 ft (121.9 cm)
6 ft (182.9 cm)
9 ft (274.2 cm)
Part # 3430-G, 3430-F Connect two poles
Part # 233951
Pole Gasket (1)
AngleHead
• In-line AngleHead Swivel provides accurate spraying at any height or angle
• Swivels to 90˚ (shown) for easy spraying of challenging areas
• Tip not included
Part # 7506A
(“F” thread) no base included
Part # 7506AG
(“G” thread) no base included
Part # 248247
with Uni-Tip Hand-Tight Base (“G” thread only)
Part # 7506-SF
with Super-Zip Hand-Tight Base
Part # 7506-SG
with Super-Zip Hand-Tight Base
Part # 7551-G
Pole Gun Adapter, Hand-Tight
Part # 7551-F
Pole Gun Adapter, Hand-Tight
Part # 87500G
With Flat Tip Guard, Wrench-Tight
Part # 87500F
With Flat Tip Guard, Wrench-Tight
Part # 7556-G
Pole Gun Adapter, Wrench-Tight
Part # 7556-F
Pole Gun Adapter, Wrench-Tight
Maxi Pole
0˚ to 90˚ (90˚ Shown)
Gun Filters – 2-Pack
• Stainless steel mesh to eliminate rust
200 Series
Part # 248677
60 Mesh & 100 Mesh (1 ea.)
300, 400, 500 Series and Combo Gun
Part # 4435-2
Part # 4434-2
Part # 4433-2
Part # 4436-2
Extra Fine 200 Mesh
Fine 100 Mesh
Medium 50 Mesh Coarse 30 Mesh Red for varnishes and lacquers
Yellow for enamels and stains
White for latex paints
Green for heavy-bodied paints
Gun Repair Kits
• Includes Ball Valve Plunger Assembly and Diffuser
Part # 288817
500 Gun repair kit
Part # 4427-F, 4427-G 400 Series gun
Part # 3027-F, 3027-G 300 Series gun
Part # 6727-F, 6727-G Combo gun
Note: 400 Series Gun Repair Kits may be used in 300 Series Guns.
“F” to “G” Adapter
Pump Repair Kits
Part # 245078
Part # 245569
Part # 244194
Part # 244194
Part # 248212
• Converts 11/16 in (17 mm) “F” Thread to 7/8 in (22 mm) “G” Thread
Part # 248248
Zip-Spray ESP
Zip-Spray 1700
Zip-Spray 2100 Plus
Zip-Spray 2300 Plus
Zip-Spray 2700, 3100, 3400G, 3600G
Strainer Bags
Part # 238769
7
Strainer Bags available in multiples of 25
Airless tip selection
Reversible Tip Systems
From state-of-the-art features to our color-coded tip handles, we make spray tips easier to use and select. Plus, we provide the technology to give you
durable, reliable equipment that delivers a consistent spray pattern for a variety of materials.
• Patented diffuser allows atomization at lower pressures, reducing tip wear and extending tip life
• Pinned handle resists twisting and breakage
• Reversible for easy cleaning
• Liquid-honed for long life and double-tested to ensure accurate spray pattern and flow rate
• Highest-quality carbide tip produces longer useable life
• Color-coded handles for easy identification
ASM’s color-coded tip handle and corresponding tip selection guide make it simple to select the right orifice and fan pattern for your painting application.
Follow the steps below for easy tip selection.
Spray Tip Application Guide
1 - Identify the surface you will be spraying
2 - Choose your coating
3 - Determine your spray pattern width
[spraying 12 in (30.5 cm) from the surface]
4 - Follow chart to tip number
How to Determine Spray Tip Size:
Tip handles are color-coded by orifice (tip hole) size
for easy identification on the job site.
Red — 200 Mesh, For Varnishes and Lacquers
Yellow — 100 Mesh, For Enamels and Stains
White — 50 Mesh, For Latex
Example:
#5 = 1/2 Fan Width or 2 x 5 = 10 Inch Fan
517
#17 Orifice is diameter of opening in thousandths
Green — 30 Mesh, For Heavy-Bonded Paints
Fan
Width
Grey
Red
Orange Yellow
Blue
Green
Purple Brown
Black
Black
Black
Black
Black
Black
in
.009
.011
.013
.015
.017
.019
.021
.023
.025
.027
.029
.031
.035
.045
Surface
Inches
Coating
Wood Interiors,
2 in
4 in
209
211
Lacquer,
6 in
309
311
Varnish,
8 in
409
411
413
Shellac
10 in
509
511
513
12 in
609
613
4 in
211
213
Alkyd Stain, Alkyd Enamel,
6
in
311
313
Sanding Sealer
8 in
411
413
415
Interior Walls,
2 in
113
115
Ceilings, Drywall
4 in
211
213
215
6 in
313
315
Latex, Vinyl, Acrylic
8 in
415
417
419
10 in
515
517
519
12 in
615
617
619
621
623
Roof
2 in
113
115
Overhangs
4 in
213
215
217
6 in
315
317
319
Primer, Enamel, Latex, Acrylic
8 in
415
417
419
10 in
515
517
519
12 in
615
617
619
Masonry, Block,
6 in
Stucco, Concrete
8 in
415
417
419
421
423
Vinyl, Oil Base, Alkyd
10 in
515
517
519
521
523
­12 in
621
623
16 in
615
617
619
8 in
417
419
421
423
Latex, Acrylic
10 in
517
519
521
523
12 in
617
619
621
623
6 in
327
8 in
419
421
423
425
427
429
431
435
Smooth Elastomeric
10 in
519
521
523
525
527
531
535
12 in
619
621
623
625
631
635
645
16 in
835
Wood Exteriors,
6 in
315
Shingle Siding,
8 in
415
417
Exterior
Stain
Shiplap
10 in
515
517
519
12 in
617
617
6 in
315
Vinyl,
8
in
415
417
419
421
Acrylic,
10 in
517
519
521
Latex
12 in
617
619
621
Open Joists
6 in
315
317
319
321
Mil White
Ceiling Areas
8 in
417
419
421
RIB Deck Ceilings
10 in
517
519
521
High Build
12 in
619
621
6 in
315
317
8 in
415
417
419
421
423
425
­Dry Fall
10 in
517
519
521
523
525
­12 in
621
623
625­­
8
Filter
Mesh
Black
.061
661
Color
Code
AIRLESS TIP SELECTION
Uni-Tip
Universal Reversible Spray Tips
• The Uni-Tip is universal with major brands, including Titan, SprayTECH, Graco RAC® IV and RAC 5 and
Airlessco. Not compatible with Graco RAC X™, ASM Super-Zip or Zip-Tip™.
• Best quality carbide tip means a superior spray pattern and a longer useable fan pattern life
• The color-coded handle makes it easy to identify the tip size on the job
• Each tip individually tested for consistent fan and orifice size
• One-piece Uni-Tip seal means fewer parts on hand
• Uni-Tip seal is compatible with the full range of paints and solvents
• Pinned Handle resists twisting and breakage
• Nib on handle for seal replacement
Part # 69-XXX
Striping Uni-Tip
• Specifically manufactured to provide crisp, clean edges
• Available in all common striping tip sizes
Part # 69xxxST
Fine-Finish Uni-Tip
•All the features of the Uni-Tip Plus, double orifice gives greater break-up of fine-finish materials
•Provides the finest atomization and a high-quality finish
•Up to 85% transfer efficiency
Part # 69-FFXXX
Uni-Tip Hand-Tight Base/Guard (Tip not included)
•Aluminum won’t rust
•Virtually eliminates paint buildup and dripping
•Easy no-tools assembly
•Quickly change from horizontal to vertical spray pattern
Part # 248200
“G” thread is 7/8” (22 mm)
Part # 249303
“F” thread is 11/16” (17 mm)
Uni-Tip Seal
•Easily installs without tools!
Part # 248228 (5-pack)
Standard Uni-Tips (69-XXX)
Fan Width
in Inches
Grey
.009
Red
.011
Orange
.013
Yellow
.015
Blue
.017
Green
.019
Purple
.021
Brown
.023
Black
.025
Black
.027
Black
.029
Black
.031
Black
.035
429
431
435
2 in
113
115
4 in
209
211­
213
215
217
219
221
6 in
309
311
313
315
317
319
321
327
8 in
409
411
413
415
417
419
421
423
425
427
10 in
509
511
513
515
517
519
521
523
525
527
531
535
12 in
609
613
615
617
619
621
623
625
631
635
16 in
Striping Uni-Tips (69XXXST)
an Width Yellow
F
in Inches
.015
4 in
215
6 in
315
8 in
10 in
12 in
615
Blue
.017
217
317
417
517
617
Black
.045
Black
.061
645
661
835
Fine Finish Uni-Tips (69-FFXXX)
Green
.019
Purple
.021
Black
.027
319
321
327
an Width
F
Red
Orange Yellow
Blue
in Inches
.011
.013
.015
.017
4 in
211­
213
215
6 in
311
313
315
8 in
411
413
415
10 in
513
517
12 in
9
Green
.019
619
Airless tip selection
Tip size imprinted on handle
Handle color-coded
denoting orifice size
Super-Zip
Locking tab
Reversible Spray Tips
• Liquid-honed and double-tested to ensure an accurate spray pattern
• Patented diffusion chamber for superior atomization
• Color-coded tip handles for easy selection
• Reversible to quickly clear tip clogs
Part # 59-xxx
Patented diffuser chamber
Striping Super-Zips
Hardened stainless steel barrel
Tungsten carbide spray tip
• Specifically manufactured to provide crisp, clean edges
• Available in all common striping tip sizes (213, 215, 315, 217, 317, 417, 219, 319, 419,
321, 421, 621, 323, 623, 625, 327, 627)
Part # 59xxxST
Fine-Finish Super-Zips
Fine-Finish Super Zips
• Double orifice gives greater break-up of fine-finish materials
• Provides the finest atomization and a high-quality finish
• Up to 85% transfer efficiency
Part # 59FFXX-XXX
09
11
13
15
17
19
111
113
115
117
119
121
211
213
215
217
219
221
311
313
315
317
319
321
411
413
415
417
419
421
511
513
515
517
519
521
611
613
615
617
619
621
Super-Zip Hand-Tight Base/Guard
• Hand-Tight Base – no tools required!
• Patented Cartridge Seal is compatible with all materials, will last through
multiple tips and is spring-loaded for easy tip insertion and removal
• Patented safety tab design locks for safe tip reversing when unclogging tip
• Available to fit all makes of guns
Part # 5901-F Fits “F” thread size - 11/16 in (17 mm)
Part # 5901-G Fits “G” thread size - 7/8 in (22 mm)
Super-Zip Cartridge Seals
• Replace Cartridge Seals quickly, without tools
• No loose gaskets
Part # 5907
Hand-Tight Cartridge Seal
2 in
4 in
6 in
8 in
10 in
12 in
14 in
16 in
18 in
•
•
331
431
531
631
731
831
931
•
•
323
423
523
623
723
823
•
•
•
325
425
525
625
725
•
925
•
•
327
427
527
627
•
827
•
•
•
•
429
529
629
729
829
•
BLACK
.033
1.16
BLACK
.035
1.31
BLACK
.039
1.62
BLACK
.041
1.79
BLACK
.043
1.98
BLACK
.045
2.16
BLACK
.047
2.36
BLACK
.049
2.57
BLACK
.051
2.81
BLACK
.053
3.00
•
•
333
433
533
633
733
833
933
•
•
335
435
535
635
735
835
935
•
•
339
439
539
639
739
839
939
•
•
•
441
541
641
741
•
•
•
•
•
443
543
643
743
•
•
•
•
•
445
545
645
745
•
•
•
•
•
447
547
647
747
•
•
10
•
•
•
449
549
649
749
•
•
•
•
•
451
551
651
751
•
•
FILTER
121
221
321
421
521
621
721
821
921
FILTER
119
219
319
419
519
619
719
819
•
FILTER
117
217
317
417
517
617
717
817
917
FILTER
115
215
315
415
515
615
715
815
915
FILTER
113
213
313
413
513
613
•
813
•
FILTER
111
211
311
411
511
611
•
•
•
•
•
•
453
553
653
753
•
•
FILTER
BLACK
.029
0.88
-------- COLOR
-------- ORIFICE SIZE
-------- GPM / FLOW
FILTER
FILTER
BLACK
.027
0.77
FILTER
BLACK
.025
0.66
FILTER
BROWN
.023
0.55
FILTER
PURPLE
.021
0.46
FILTER
GREEN
.019
0.36
FILTER
BLUE
.017
0.30
FILTER
REFERENCE
FILTER
FILTER
YELLOW
.015
0.23
FILTER
FAN BLACK
WIDTH .031
IN
INCHES 1.02
ORANGE
.013
0.17
FILTER
•
209
309
409
•
•
•
•
•
FILTER
2 in
4 in
6 in
8 in
10 in
12 in
14 in
16 in
18 in
RED
.011
0.12
FILTER
GREY
.009
0.08
FILTER
FAN
WIDTH
IN
INCHES
FILTER
Super-Zip Selection Guide
Green 30 Mesh
White 50 Mesh
Yellow 100 Mesh
Red 200 Mesh
711
713
715
717
719
—
AIRLESS TIP SELECTION
Flat Tip Systems
Standard Flat Tips
• Flat Tips are universal and fit all makes of Flat Tip Bases
Part # 90-xxx
Flat Tip Base/Guard
• Flat Tip Bases are universal and are available to fit all makes of guns
• Accommodates Flat Tip-n-Gasket (93-xxx) and Standard Flat Tips (90-xxx)
Part # 420-F Fits “F” thread size - 11/16 in (17 mm)
Part # 420-G Fits “G” thread size - 7/8 in (22 mm)
• Separate tip gasket available in tubes of eight (8)
Part # 401-8
Flat Tip Selection Guide
•
227
327
427
527
627
•
827
•
•
•
•
429
529
629
729
829
•
•
•
331
431
531
631
•
831
•
•
•
•
433
533
633
•
833
•
•
235
•
435
535
635
735
835
935
•
•
•
439
•
•
•
•
•
11
•
•
•
•
543
•
•
•
•
FILTER
FILTER
FILTER
FILTER
FILTER
•
223
323
423
523
623
723
823
•
.045
2.16
•
•
•
•
•
645
•
•
•
.051
2.81
•
•
•
451
•
•
•
•
•
.055
3.17
•
•
•
•
•
655
•
•
•
FILTER
.043
1.98
-------- ORIFICE SIZE
-------- GPM / FLOW
FILTER
.039
1.62
121
221
321
421
521
621
721
821
921
.023
0.55
FILTER
.035
1.31
119
219
319
419
519
619
719
819
•
.021
0.46
FILTER
.033
1.16
•
217
317
417
517
617
717
817
917
.019
0.36
FILTER
.031
1.02
115
215
315
415
515
615
715
815
•
.017
0.30
FILTER
113
213
313
413
513
613
•
813
•
.015
0.23
FILTER
.029
0.88
FILTER
•
•
325
425
525
625
725
•
925
111
211
311
411
511
611
•
•
•
.013
0.17
FILTER
2 in
4 in
6 in
8 in
10 in
12 in
14 in
16 in
18 in
.027
0.77
FILTER
.025
0.66
109
209
309
409
509
609
•
•
•
.011
0.12
FILTER
FAN
WIDTH
IN
INCHES
FILTER
•
207
307
407
•
•
•
•
•
.009
0.08
FILTER
2 in
4 in
6 in
8 in
10 in
12 in
14 in
16 in
18 in
FILTER
.007
0.04
FILTER
REFERENCE
FAN
WIDTH
IN
INCHES
texture APPLICATION GUIDE
Texture Application Guide
Get the Interior and Exterior Texture Finish You Want
Interior Texture
Simulated Acoustic
(Popcorn)
Orange Peel,
Fine Splatter
Splatter
Knockdown
Smooth, Level 5
and Skim Coat
Commonly Used Materials
• Ceiling Spray
Textures Containing
Polystyrene
or Vermiculite
Aggregate
(Fine, Medium,
Coarse)
• All-Purpose Joint
Compounds
• Lightweight Joint
Compounds
• Wall and Ceiling
Spray Textures
• All-Purpose Joint
Compounds
• Lightweight Joint
Compounds
• Wall and Ceiling
Spray Textures
• All-Purpose Joint
Compounds
• Lightweight Joint
Compounds
• Wall and Ceiling
Spray Textures
Exterior Texture Not suitable for stucco or EIFS materials
Textured Acrylics
and Elastomerics
Deck Coatings
Commonly Used Materials
• Textured Acrylic
Materials
• Textured
Elastomeric
Materials
• Decorative and AntiSkid Deck Coatings
Zip-Tex Spray Nozzles Part # 234153
Black 12 mm
Acoustics
Large Knockdown
Popcorn
Beige 4 mm
Fine Finish
Orange Peel
Gray 8 mm
Splatter
Small to Med
Knockdown
White 6 mm
Orange Peel
Fine Spatter
12
• All-Purpose Joint
Compounds
• Lightweight Joint
Compounds
• Wall and Ceiling
Spray Textures
• Skim Coat Materials
• Wall Surfacing
Materials
texture spray equipment
Texture Sprayers
ASM Zip-Tex texture units are manufactured by the worlds leading manufacturer of airless spray equipment. Our pumping systems are built rugged and are
designed for large and small jobs offering a less fatiguing and better way to add texture coatings. ASM offers two texture spray systems for the contractor
who is ready to graduate from the traditional hopper gun. ASM’s texture units deliver a smooth material flow for uniform coverage and a consistent and
professional pattern.
Interior Coatings:
Exterior Coatings:
Popcorn
Orange Peel
Splatter
Knockdown
Smooth Level 5 or Skim Coat
Textured Acrylics and Elastomerics
Deck Coatings
Not suitable for Stucco or EIFS coatings
Zip-Tex 650
Interior Texture Sprayer
The Zip-Tex 650 is the perfect pumping system for tradesmen and contractors
who are ready to graduate from a hopper gun to a faster, more productive,
less-fatiguing spray rig. Just add air.
Innovative Pump-Only Texture Sprayer
• Small, lightweight and portable – easy to bring on and off the job site
• weight: 25 lbs (11.3 kg)
RotoFlex II™ Texture Pump
• Delivers smooth materi­al flow for uniform coverage and a consistent pattern
• Provides material flow rates up to .65 gpm for faster applications
Superior Texture Projection
• Pumping system force-feeds material through the texture gun and projects
texture farther than a traditional hopper gun
Material Hopper
• Holds 5 gallons of material, allowing you to complete a whole room without
stopping to refill
Includes
Unit, Gun, 6 mm and 8 mm nozzles, 20 ft material hose and viscosity ball
AIR COMPRESSOR
SOLD SEPARATELY
Part # 254982
UPC # 69946089943
IMPORTANT:
• Designed for use with a user-supplied air
compressor minimum air compressor rating
3.5 cfm at 40 psi; .09 m /min
3
13
TEXTURE SPRAY EQUIPMENT
Zip-Tex 900
Interior Texture Sprayer
The all new Zip-Tex 900 is the perfect choice for the contractor who’s looking to
spray high-quality texture finishes with a simple-to-use, self-contained machine.
New RotoFlex II Texture Pump
• Features an innovative braided sling that provides extra support to the RotoFlex
pump tube for higher performance and life
• Delivers smooth material flow for uniform coverage and a consistent spray pattern
New Higher-Production Performance Points
• Max output .9 gallons per minute (Finish jobs even faster)
• Material flow increased by more than 20% over the previous model 750.
• Material pressure max 60 psi, 4.2 bar boosted by more than 10% over the 750 –
handle thicker mud mixes
New Higher-Capacity On-Board Air Compressor
• Compressor Air Output: 8.7 displacement cfm; 4.0 cfm at 45 psi; 4.0 m /min
• 20% greater air output than the 750. Projects material further
• Complete air-consuming splatter and orange peel finishes jobs faster
3
New Larger-Capacity Hopper
• Holds 8 gallons of material for more time spraying between refills
• Ultra-low entry height of 32 inches makes filling the hopper easier
Exclusive Dual-Use Gun
• Versatile, patent-pending design converts quickly to a hopper gun for
touch-up jobs
• Ea­sy-to-use air trigger adjustments on the gun
• New through-handle air passage prevents material from contaminating the
needle spring
New Single-Motor Design
• One motor operates the pump and air compressor, making the sprayer smaller
and 15 lbs (7 kg) lighter
• Delivers 1.7 hp for optimal performance
Touch-Up Hopper (included)
• Attaches to air spray gun without tools for completing quick jobs and touch-ups
• 3/4-gallon capacity
Includes
Unit, Gun, 25 ft material and air hose, touch-up hopper, 4 nozzles and
viscosity ball
Part # 254983
UPC # 769946089950
14
texture spray equipment
ASM Professional Hopper Gun
Sprays acoustics, drywall mud, waterproofing material, pool deck sealant, stucco, and most
gravity-fed materials. Angled 1-1/2 gallon (5.7 L) hopper allows more material capacity for
longer spraying before refills!
Zip-Tex 650 Gun
Part # 288906
Exclusive Hopper
Clamp
Gun only
Zip-Tex 750, 900 and 1000
Part # 288905
Gun only
Part # 246409
Gun including Hopper
Spray Nozzles & Replacement Parts
Part # 234153 Spray Nozzles
Beige, 4 mm — Fine Finish, Orange Peel
White, 6 mm — Orange Peel, Fine Splatter
Gray, 8 mm — Splatter, Small to Medium Knockdown
Black, 12 mm — Acoustics, Large Knockdown, Popcorn
Part # 234149 25 ft (7.6 m) Material/Air Hose (Zip-Tex 750, 900 & 1000)
Part # 288622 20 ft Material/Air Hose Kit for Zip-Tex 650
Part # 15C090 Viscosity Ball – All Machines
Part # 234156 RotoFlex Replacement Pump Hose (Zip-Tex 750 & 1000 only)
Recommended replacement after 2000-2500 gallons (7571-9463 L) of gypsum-based material
Part # 288623 RotoFlex II Replacement Pump Hose (Zip-Tex 650 & 900 only)
Part # 234159 Gun Repair Kit (All guns except 288906 Gun)
Part # 258000
Gun Repair Kit for 288906 Gun
Part # 234162
Material Hose Plug and Hopper Gun Attachment Plug
Part # 234188
Hopper Clamp
15
PRESSURE WASHERS
Zip-Clean
Direct Drive Pressure Washers
Zip-Clean pressure washers offer innovative features to make your job easier, and reliable components to make you more productive.
You’ll spend less time on machine set-up with our one-hand hose connection and built-in chemical injector. Use Zip-Clean pressure
washers for surface preparation before painting houses, decks, fences, buildings and more.
• Dependable Honda overhead valve engines
• General pump with unloader, thermal relief, and over-pressure protection
• Low-profile cart for easy transport; easy to lift
• Double swivel on high pressure hose prevents tangling
• Self-siphoning chemical hose
• Features a steel powder-coated cart, built-in chemical injector, nozzle holder, and gun-hose rack
®
™
Zip-Clean 2525
Perfect for those who need a washer heavy-duty enough to get the job done,
without the investment of a commercial-grade model.
• 2500 psi (172 bar) at 2.5 gpm (9.5 lpm)
• 160cc Honda GC series motor
• Radial axial pump with thermal protection
• 30 ft (9.1 m) hose (Maximum)
• Includes chemical injector and set of 3 nozzles­0º, 15º and 40º
• 1 year limited warranty
Zip-Clean 2525
2500 psi (17.2 MPa, 172 bar)
160cc Honda GC series motor
Part # 246602
UPC # 769946080407
Includes:
• 30 ft (9.1 m) high pressure hose
• Heavy-duty gun and wand
• 4 color-coded quick-connect spray nozzles
(3 spray nozzles, 1 chemical injection nozzle)
16
PRESSURE WASHERS
Zip-Clean 2730
2700 psi (18.6 MPa, 186 bar) @ 2.4 gpm (9 lpm)
200cc Honda OHV Engine
Part # 245348
UPC # 769946075663
Includes:
• 50 ft (15.2 m) high pressure non-marking hose
• Heavy-duty gun and wand
• 4 color-coded quick-connect spray nozzles (3 spray nozzles,
1 chemical injection nozzle)
Zip-Clean 3030
3000 psi (20.6 MPa, 206 bar) @ 3.0 gpm (11 lpm)
270cc Honda OHV Engine
Part # 245349
UPC # 769946075670
Includes:
• 50 ft (15.2 m) high pressure non-marking hose
• Heavy-duty gun and wand
• 4 color-coded quick-connect spray nozzles
(3 spray nozzles, 1 chemical injection nozzle)
Standard Nozzles
(2525)(2730)
High Pressure
Non-Marking Hose
Part # 244768 - Includes: 0˚, 15˚,
25˚, 40˚
Part # 805634 - Includes:
Chemical Injector Nozzle
Part # 805535 - 0˚ Red
Part # 805536 - 15˚ Yellow
Part # 805537 - 25˚ Green
Part # 805538 - 40˚ White
3/8 in x 50 ft (10 mm x 15 m),
3000 psi (21.0 MPa, 210 bar)
Part # 245416 for 2730/3030
3/8 in x 30 ft (10 mm x 8 m),
3000 psi (21.0 MPa, 210 bar)
Part # 118125 for 2525
Standard Nozzle (3030)
Part # 244769 - Includes: 0˚, 15˚,
25˚, 40˚
Part # 805634 - Includes:
Chemical Injector Nozzle
Part # 805539 - 0˚ Red
Part # 805540 - 15˚ Yellow
Part # 805541 - 25˚ Green
Part # 805542 - 40˚ White
Guns
Part # 244784
Gun with vented composite wand
handle and quick-connect fittings,
5000 psi (344 bar, 34.4 MPa) max.
working pressure
Rotating Nozzle
Part # 246674 for use with 2525 only
Gun only
Part # 198012
Part # 118124 Gun Extension for 2525
Oscillating Nozzle (Not Shown)
Part # 198013
17
Fluids
Fluids
ASM fluids and protectants keep your equipment in top performing condition. ASM fluids are approved for use in all airless pumps.
Pump Life
Packing Seal
• Protects pump from corrosion and rust during shortand long-term storage
• Lubricates and cleans to help stop sticking valve seats
• Freeze proof to -30° F (-34° C)
Part # 2 45650 (8 oz, 237 ml; 48 per case)
245423 (32 oz, 946 ml; Available in multiples of 6)
• Prevents coating material from adhering to the pump’s
piston rod
• Prolongs pump packing life in all brands of piston pumps
Part # 245427 (8 oz, 237 ml; Available in multiples of 6)
Part # 245428 (32 oz, 946 ml; Available in multiples of 12)
Hydraulic Fluid
• Non-foaming formula
• Resists emulsifying and chemical breakdown
Part # 245425 (32 oz, 946 ml; Available in multiples of 12)
Starter Kit
• For lubrication and protection
Part # 245651 (8 oz, 237 ml; Pump Life) (4 oz, 119 ml; Packing Seal)
18
merchandising displays
Visit your local Dealer for ASM Accessories located in these
merchandise racks.
Revolving Locking Tower
Floor Merchandiser
Wall or Counter Locking
Merchandiser
Requires 4 Square feet
24 in Wide x 24 in Deep x 91 in High.
13 in Wide x 7 in Deep x 26 in or 30 in High
without header.
For more information contact ASM Customer Service at 1-800-854-4025
19
AIRLESS product specifications
Model
Zip-Spray ESP
Zip-Spray 1700
Part Number:
248772 (120V)
248850 (240V)*
233789 (120V)
Zip-Spray
2100 Plus
Zip-Spray
2300 Plus
Zip-Spray
2700 Plus
Zip-Spray
3100 Plus
247485 (Cart)
247482 (Stand)
247484 (240V Stand)*
247487 (240V Cart)*
247531
247533 (240V)*
247558
247565 (240V)*
247559
Max Tip:
.015
.017
.021
.023
.027
.031
Max psi/bar:
2800 psi (19.3 MPa, 19.3 bar)
3000 psi (20.7 MPa, 207 bar)
3300/227
3300/227
3300/227
3300/227
Max gpm/lpm:
.24 gpm (.91 lpm)
.31 gpm (1.17 lpm)
.47/ 1.8
.54/ 2.0
.86/3.3
1.1/4.2
Weight lbs/kg:
21 lbs
36 lbs
36 lbs Stand, 65 lbs Cart
66 lbs Cart
100 lbs
104 lbs
Max Hose Length:
75 ft (45.7/91.4 m)
depending on tip size
150 ft (45.7/91.4 m)
depending on tip size
150/300 ft (45.7/91.4 m)
depending on tip size
150/300 ft (45.7/91.4 m)
depending on tip size
150/300 ft (45.7/91.4 m)
depending on tip size
150/300 ft (45.7/91.4 m)
depending on tip size
Motor:
3/8 HP
3/4 HP
5/8 HP DC
7/8 HP
1.75 HP Brushless
2.0 HP Brushless
3000W
3000W
5000W
5000W
1 Gun .027 Tip
2 Guns .017 Tip
1 Gun .031 Tip
2 Guns .019 Tip
• 500 Series Professional Airless
Spray Gun with 2-finger trigger
• 517 Uni-Tip with Uni-Tip
Hand-Tight Base
• Hose: 1/4” x 50’ (6.4mm x
15m) 3300 psi (227 bar)
• Pump Life Protectant Fluid
Generator Requirements:
Gun Support:
Sprayer Includes:
• 200 Contractor Spray Gun
with 4-finger trigger
• 515 Uni-Tip with Hand-Tight
Base
• Hose: 1/4 in x 25 ft (6.3mm
x 7.6m), 3300 psi (22.7 MPa,
227 bar) airless paint hose
• Pump Life Protectant Fluid
• 500 Series Professional Airless
Spray Gun with 2-finger trigger
• 517 Uni-Tip with Uni-Tip
Hand-Tight Base
• Hose: 1/4 in x 50 ft (6.3mm x
15.2m), 3300 psi (22.7 MPa,
227 bar) airless paint hose
• Pump Life Protectant Fluid
• 500 Series Professional Airless
Spray Gun with 2-finger trigger
• 517 Uni-Tip with Uni-Tip
Hand-Tight Base
• Hose: 1/4” x 50’ (6.4mm x
15m) 3300 psi (227 bar)
• Pump Life Protectant Fluid
• 500 Series Professional Airless
Spray Gun with 2-finger trigger
• 517 Uni-Tip with Uni-Tip
Hand-Tight Base
• Hose: 1/4” x 50’ (6.4mm x
15m) 3300 psi (227 bar)
• Pump Life Protectant Fluid
• 500 Series Professional Airless
Spray Gun with 2-finger trigger
• 517 Uni-Tip with Uni-Tip
Hand-Tight Base
• Hose: 1/4” x 50’ (6.4mm x
15m) 3300 psi (227 bar)
• Pump Life Protectant Fluid
Pump Filter:
Includes Easy Out Pump Filter
Includes Easy Out Pump Filter
Includes Easy Out Pump Filter
Includes Easy Out Pump Filter
Easy Out Filter Screens:
• 60 Mesh - 245527
• 100 Mesh - 245528
• 200 Mesh - 245526
• 60 Mesh - 245527
• 100 Mesh - 245528
• 200 Mesh - 245526
• 30 Mesh- 244071
• 60 Mesh- 244067
• 100 Mesh- 244068
• 200 Mesh- 244069
• 30 Mesh- 244071
• 60 Mesh- 244067
• 100 Mesh- 244068
• 200 Mesh- 244069
Dimensions:
• 14.9 L x 15.0 W x 15.6 H (in)
37.8 L x 38.1 W x 39.6 H (cm)
• 19.5 L x 17.25 W x 40.75 H (in)
49.5 L x 43.8 W x 103.5 H (cm)
• Cart 22.0 L x 20.5 W x 38.8 H (in)
55.9 L x 52.1 W x 98.6 H (cm)
• Stand 15.75 L x 14.0 W x 17.0 H (in)
40.0 L x 36.0 W x 43.0 H (cm)
• Cart 22.0 L x 20.5 W x 38.8 H (in)
55.9 L x 52.1 W x 98.6 H (cm)
• Cart 26.5 L x 22.5 W x 38.75 H (in)
67.3 L x 57.2 W x 98.4 H (cm)
• Cart 26.5 L x 22.5 W x 38.75 H (in)
67.3 L x 57.2 W x 98.4 H (cm)
Repair Parts:
• Inlet Strainer - 245578
• Pump Repair Kit - 245078
• Pump Repair Kit: 245569
• Inlet Strainer - 276897
• Packing Kit - 244194
• Rod - 249125
• Cylinder - 243176
Complete Pump Lower:
• Part # 255475
• Inlet Strainer - 276897
• Packing Kit - 244194
• Rod - 249125
• Cylinder - 243176
Complete Pump Lower:
• Part # 255475
• Inlet Strainer - 189920
• Packing Kit- 248212
• Rod- 248206
• Sleeve- 248209
Complete Pump Lower:
• Part # 248204
• Inlet Strainer - 189920
• Packing Kit- 248212
• Rod- 248206
• Sleeve- 248209
Complete Pump Lower:
• Part # 248204
• Operation - 312360
• Repair - 312361
• Pump - 312362
• Gun - 312363
• Operation - 312360
• Repair - 312361
• Pump - 312362
• Gun - 312363
• Operation- 312538
• Repair- 312537
• Pump- 310643
• Gun- 312363
• Operation- 312538
• Repair- 312537
• Pump- 310643
• Gun- 312363
2 year warranty against defects,
materials and workmanship;
excluding wear parts.
2 year warranty against defects,
materials and workmanship;
excluding wear parts.
2 year warranty against defects,
materials and workmanship;
excluding wear parts.
2 year warranty against defects,
materials and workmanship;
excluding wear parts.
Manuals:
Warranty:
1 year warranty against defects,
materials and workmanship;
excluding wear parts.
1 year warranty against defects,
materials and workmanship;
excluding wear parts.
* 240V Units are not sold domestically
20
AIRLESS product specifications
Zip-Spray
3600 G Plus
247560
Model
Zip-Tex 650
Zip-Tex 900
Part Number:
254982
254983
Max psi/bar:
50/3.5
60/4.2
Max gpm/lpm:
.65/2.5
.9/2.5
Weight lbs/kg:
25/11.3
60/27.2
Max Hose Length:
20 ft (6 m)
25 ft (6 m)
1.25/4.7
Motor:
1.0 HP
1.7 HP
113 lbs
Compressor Air
Output:
• User supplied air
compressor required
• Minimum air compressor
rating 3.5 cfm @ 40 psi
• (.09 m /min)
• 8.7 Displacement cfm (sm.ltrs)
• 4.0 cfm @ 45 psi
• (.1 m /min)
Sprayer Includes:
• Hopper: 5 gal
• Contractor Texture Gun
• T ips/Discs Supplied with
Trigger Gun: 6 mm, 8 mm
• 20 ft material hose
• Hopper: 8 gal
• Contractor Texture Gun
• T ips/Discs Supplied with
Trigger Gun: 4 mm,
6 mm, 8 mm, 12mm
• 3/4 gal Touch-up Hopper
• 25 ft Material/Air hose
Dimensions:
• 12 W x 20 L x 20 H (in)
• 30 W x 51 L x 51 H (cm)
• 18 W x 23 L x 41 H (in)
• 46 W x 58 L x 100 H (cm)
Repair Parts:
• Gun - 288906
• 20 ft Air/Material Hose
- 288622
• RotoFlex II Hose - 288623
• Gun - 288905
• Gun/Hopper - 246409
• 25 ft Material/Air Hose
- 234149
• RotoFlex II Hose - 288623
Manuals:
• Operation - 311766
• Repair - 311774
• Operation - 311766
• Repair - 311774
Materials Sprayed
• Simulated acoustic and
drywall mud
Typical
Applications
Warranty:
.036
3300/227
150/300 ft (45.7/91.4 m)
depending on tip size
• 500 Series Professional Airless
Spray Gun with 2-finger trigger
• 517 Uni-Tip with Uni-Tip
Hand-Tight Base
• Hose: 1/4 in x 50 ft
(6.4 mm x 15 m) 3300 psi
(227 bar)
• Pump Life Protectant Fluid
• Cart 32 L x 22.25 W x 31.5 H (in)
81 L x 56.5 W x 80 H (cm)
• Inlet Strainer - 189920
• Packing Kit - 248212
• Chromex Rod - 248206
• Cylinder - 287551
• Sleeve - 248209
• Piston Valve - 239937
• Intake Valve Kit - 246429
• 30/55 Gallon Siphon Kit 287541
Complete Pump Lower:
• Part # 287512
Zip-Clean 3030
Direct-Drive
Part Number:
246602
245348
245349
Operating Pressure:
2500 psi
(172 bar, 17.2 MPa)
2700 psi
(186 bar, 18.6 MPa)
3000 psi
(206 bar, 20.6 MPa)
2.5 gpm (9.5 lpm)
2.7 gpm (10.2 lpm)
3.0 gpm (11 lpm)
Weight lbs/kg:
70 lb (32 kg)
99 lb (45 kg)
135 lb (61 kg)
Fuel Tank Capacity:
1.8 qt (1.8 liter)
3.8 qt (3.6 liter)
6.2 qt (6.1 liter)
Motor:
(4 cycle, air-cooled):
160cc Honda GC Series
(4 cycle, air-cooled):
200cc Honda OHV
(4 cycle, air-cooled):
270cc Honda OHV
Pump Type:
Radial Axial Pump
General Pump, Triplex
Piston Ceramic Plunger
General Pump, Triplex
Piston Ceramic Plunger
Tips:
• 0° Red - 805535
• 15° Yellow - 805536
• 25 Green - 805537
• 40° White - 805538
• Black Chemical Injector
- 805634
• Set of 4 Tips (0°, 15°,
25°, 40°) - 244768
• 0° Red - 805535
• 15° Yellow - 805536
• 25° Green - 805537
• 40° White - 805538
• Black Chemical Injector
- 805634
• Set of 4 Tips (0°, 15°,
25°, 40°) - 244768
• 0° Red - 805539
• 15° Yellow - 805540
• 25° Green - 805541
• 40° White - 805542
• Black Chemical Injector
- 805634
• Set of 4 Tips (0°, 15°,
25°, 40°) - 244769
Dimensions:
Dimensions:
• 22 W x 23.5 L x 34 H (in)
• 56 W x 60 L x 86 H (cm)
Dimensions:
• 21.5 W x 35.5 L x 34 H (in)
• 55 W x 90 L x 86 H (cm)
Dimensions:
• 21.5 W x 35.5 L x 34 H (in)
• 55 W x 90 L x 86 H (cm)
Replacement Parts:
• Gun only - 246674
• Wand Extension 118124
• Hose - 118125
• Gun - 288905
• Gun/Hopper - 246409
• 25 ft Material/Air Hose
- 234149
• RotoFlex II Hose 288623
• Gun & Wand -244784
• Hose - 245416
• Simulated acoustic and
drywall mud
Manuals:
Instruction - 309829
Instruction - 309424
Repair - 309425
Instruction - 309424
Repair - 309425
• Residential and light
commercial interiors
• Residential and light
commercial interiors
Warranty:
1 year warranty against
defects, materials and
workmanship; excluding
wear parts.
1 year warranty against
defects, materials and
workmanship; excluding
wear parts.
1 year warranty against
defects, materials and
workmanship; excluding
wear parts.
2 year warranty against
defects, materials and
workmanship; excluding
wear parts.
2 year warranty against
defects, materials and
workmanship; excluding
wear parts.
Includes Easy-Out Pump Filter
• 30 Mesh - 246425
• 60 Mesh - 246384
• 100 Mesh - 246382
• 200 Mesh - 246383
Zip-Clean 2730
Direct-Drive
Water Pump Flow Rate:
3
3
(1) Gun with .036
(2) Guns with .023
(3) Guns with .018
Zip-Clean 2525
Direct-Drive
Model
• Instruction - 312576
• Repair - 312586
2 year warranty against defects,
materials and workmanship;
excluding wear parts.
21
ASM Customer Service
Warranty
20500 David Koch Ave.
Rogers, MN 55374
Phone: 800-854-4025
Fax: 800-228-5104
ASM warrants its products to be free of defects in
material and workmanship for one year (See operation
manual for complete warranty information)
visit us on the web FOR PROMOTIONS,
PRODUCT UPDATES, MANUALS, DEALERS,
SERVICE CENTERS AND GENERAL
INFORMATION
ASM Authorized Service Agencies
Call 1-800-854-4025 or see our website for the nearest
ASM Authorized Service Agency.
www.asmcompany.com
A Division of Graco®
©2008 ASM Company. Form No. 335000 Rev. G 12/08 Printed in U.S.A.
All other brand names or marks are used
for187identification
purposes
and are trademarks of their respective owners.
Pantone
Pantone
116
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising