Philips AZ1053 User manual

Philips AZ1053 User manual
CD Soundmachine
User manual
Manuel d’utilisation
Manual del usuario
Benutzerhandücherer
AZ1053
Meet Philips at the Internet
http://www.philips.com
W
CLASS 1
LASER PRODUCT
AZ1053
Printed in China
PDCC-JH-0551
1
1
2
3
4
5
#
6
7
8
9
0
!
@
2
6 x R14 • UM-2 • C-CELLS
$
Important notes for users in the U.K.
Remove fuse cover and fuse.
Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.
Refit the fuse cover.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of
plug proceed as follows:
1.
2.
3.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a
value of 3 Amp. If a plug without a fuse is used, the fuse at the distribution board
should not be greater than 3 Amp.
Note:The severed plug must be disposed of to avoid a possible shock hazard should it
be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N),
brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:
• Connect the blue wire to the terminal marked N or coloured black.
• Connect the brown wire to the terminal marked L or coloured red.
• Do not connect either wire to the earth terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the
sheath of the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and
The Performer’s Protection Acts 1958 to 1972.
3
4
5
6
7
8
PRESET
DBB
CD
DBB
CD
PROG
CD
PROG
CD
REP ALL
CD
TUNER
TRK
TRK
TRK
SHUF TRK
FM
MHz
9
X
C
B
A
A
English
Supplied Accessories
– AC power cord
Top/front panels (See 1)
1 Source selector: CD,TUNER,TAPE/OFF
– selects CD, radio or tape source of sound
– power off switch
2 CASSETTE RECORDER keys:
PAUSE 8 – pauses playback or recording
STOP•OPEN 9/
– stops the tape or recording;
– opens the cassette holder.
F.FWD 5 / REW 6 – fast winds/ rewinds
tape
PLAY 1 – starts playback
REC 0 – starts recording.
3 Display – shows the status of the set
4 9 – stops CD playback;
– erases a CD program
5 2 ; – starts or pauses CD playback
MODE – selects different play modes:
e.g. REPEAT or SHUFFLE (random order)
PROG
CD: – programs tracks and reviews the program
TUNER: – programs preset radio stations
PRESET +/- – selects a preset radion station
6 LIFT TO OPEN – opens/ closes the CD
door.
7 DBB – turns the bass enhancement on/off.
8 Telescopic antenna - improves FM
reception.
9 TUNING § ∞
Controls
TUNER: – tunes to radio stations
CD: – selects the next/previous track
– fast searches forwards/backwards
(press and hold the button) within the
current track
0 BAND – selects waveband: FM or MW
Back/bottom panels (See 2)
! VOLUME – adjusts volume level.
@ p – 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
# AC MAINS~ – inlet for power cord.
$ Battery door – open to insert 6 x 1.5V
R-14/ UM-2/ C-cells
CAUTION
- Visible and invisible laser radiation.
If the cover is open, do not look at
the beam.
- High voltage! Do not open.You run
the risk of getting an electric shock.
The machine does not contain any
user-serviceable parts.
- Modification of the product could
result in hazardous radiation of
EMC or other unsafe operation.
This set complies with the radio
interference requirements of the
European Union.
Power Supply
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
1
Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated
by the "+" and "–" symbols inside the compartment. (See 2)
Batteries (not included)
2
Replace the battery door, making sure the batteries are firmly and correctly in place.The set is
now ready to operate.
•
•
•
When inserting new batteries, do not try to mix
old batteries with the new ones.
Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type
for the set.
Incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to burst:
Batteries contain chemical substances, so
they should be disposed of properly.
•
Remove the batteries if the set is not to be used
for a long time.
2
1
To switch the set off completely, withdraw the
power cord from the wall socket.
Connect the power cord to the AC
MAINS~ inlet and the wall socket.The set is
now connected and ready for use.
Check if the power voltage, as shown on
the type plate located on the
bottom of the set, corresponds to your
local power supply. If it does not, consult your
dealer or service center.
Using AC power
3
4
Install the unit near the AC outlet and where
the AC power plug can be easily reached.
Basic Operation
•
Helpful hints:
The type plate is located on the
bottom of the set.
Disconnect the power cord from the wall
socket to protect your set during heavy
thunderstorms. Children could seriously injure
themselves as the free end of the cable may
still be live if only the connector is removed
from the MAINS socket at the back of the
unit.
–
To avoid unnecessary energy consumption,
always adjust the Source selector to TAPE/
OFF after using the set and check that the
tape deck keys are released.
Basic operation
1
To select your sound source, adjust the
Source selector to: CD, TUNER or
TAPE/ OFF.
Switching on and off and selecting the
function
2
To switch off the set, adjust the Source
selector to TAPE/ OFF position and
check the cassette keys are released.
1
Adjust the volume with the VOLUME 3, 4
controls.
➜ Display briefly shows UoLand the volume level in number from 00-32.
Adjusting volume and sound
2
Adjust DBB to select dynamic bass boost on
or off.
➜ Display shows “DBB” when activated.
Digital Tuner
Digital tuner
4
3
2
1
Repeat step 3 if necessary until you find the
desired station.
Press and hold TUNING ∞ or § until the
frequency in the display starts running.
➜ The radio automatically tunes to a station
of sufficient reception. Display shows
Srch during automatic tuning.
Push BAND to FM or MW to select
desired waveband.
Push the source selector to TUNER.
➜ tu is displayed briefly, then the radio station frequency, waveband and, if programmed, a preset number are shown.
(See 3)
Tuning to radio stations
•
To tune to a weak station, press TUNING
∞ or § briefly and repeatedly until you have
found optimal reception.
•
For FM, extend, incline and turn the telescopic aerial. Reduce its length if the signal is
too strong.
To improve radio reception:
•
For MW, the set uses a built-in aerial. Direct
this aerial by turning the whole set.
Programming radio stations
You can store up to a total of 20 radio stations in the memory (10 FM and 10 MW),
manually or automatically (Auto store).
4
3
2
1
Repeat steps 1-4 to store other stations.
Press PROG to confirm.
Press PRESET +/- once or more to allocate
a number from 1 to 10.
Press PROG to activate programming.
➜ Display: PROG flashes.
Tune to your desired station (see Tuning to
radio stations).
Manual programming
5
–
Helpful hints:
You can erase a preset station by storing
another frequency in its place.
1
Push BAND to FM or MW to select
desired waveband.
Autostore
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
2
Press PROG until AutO flashes.
➜ Available stations are programmed (MW
or FM). After all stations are stored, the
first autostore preset station will then
automatically play.
To listen to a preset or autostore station
Press the PRESET+/- buttons once or more
until the desired preset station is displayed.
CD Player
•
MP3, CD-ROM, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback.
This CD player plays Audio Discs including
CD-Recordables (CD-R) and CD-Rewritables
(CD-RW).
Playing a CD
•
IMPORTANT!
Adjust the Source selector to CD.
CDs encoded with copyright protection
technologies by some record companies may
be unplayable by this product.
2
1
Press 2; to start playback.
➜ Display shows flashing rEAd indicating
the disc reading, then the total track number and playing time. “CD” is also display.
(See 4)
Open the CD door, and insert a CD with
the printed side facing up, then press the CD
door gently to close.
3
➜ Display shows current track number and
the elapsed time of the track.
To pause playback, press 2;.
To stop CD playback, press 9.
To resume, press 2; again.
➜ Display:The elapsed playing time flashes.
5
4
6
Helpful hints:
you open the CD door;
CD play will also stop when:
–
source;
– you select TUNER or TAPE/ OFF sound
– the CD has reached the end.
Selecting a different track
Finding a passage within a
track
• Press TUNING ∞/ § once or repeatedly
until the desired track number appears in the
display.
• In the pause/stop position, press 2; to start
playback.
1
2
During playback, press and hold TUNING
∞/ §.
➜ The CD is played at high speed and with
reduced volume.
When you recognize the passage you want,
release TUNING ∞/ § to resume normal
playback.
Helpful hints:
last track, the CD goes to stop mode.
– When your searching reaches the end of the
CD Player
Programming track numbers
1
In the stop position, press TUNING ∞ or
§ to select your desired track number.
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
2
Press PROG to store the desired track
number.
➜ “PROG” is displayed, and display briefly
shows current program sequence, then
the currently stored track number.
(see 5 6)
3
To play your program, press 2;.
Repeat steps 1 to 2 to select and store all
desired tracks in this way.
➜ If you attempt to store more than 20
tracks, no track can be stored and the display shows FuLL.
• If you attempt to program without first
selectig a track, display will show NOSEbriefly,
then the total track number and playing time.
4
To review your program
In the stop position, press PROG to view the
first program information, then press PROG
again to view the next program information.
Repeat the above to view all the program
stored.
➜ Each time the display shows the program
PrOg X) briefly, then the program
sequence (P
track number.
To erase a program
You can erase a program by:
– pressing 9 (twice during playback or once in
the stop position);
– selecting TUNER or OFF position;
– opening the disc door.
➜ Display: PROG disappears.
Different play modes:
REPEAT and SHUFFLE
(See 7 8)
You can play the current track or the whole
disc repeatedly, and combine REPEAT modes
with PROGRAM.
REP – plays the current track continuously.
REP ALL – repeats the entire CD/program
•
Selection of shuffle play is not available in the
program mode.
SHUF – plays all the tracks in random order
1
3
2
To select play mode, press MODE once or
more.
➜ The display shows selected play mode.
Press 2; to start playback if in the stop/pause
position.
➜ The disc will play automatically around
few seconds later when SHUF mode is
selected.
To return to normal playback, press MODE
repeatedly until the modes are no longer displayed.
– You can also press 9 to cancel your play
mode.
Cassette Recorder
2
Press PLAY 1 to start playback.
Press STOP•OPEN 9/ to open the cassette holder and insert a cassette, and close
the deck.
Adjust the Source selector to TAPE.
Cassette playback
3
To pause playback, press PAUSE 8. To
resume, press the key again.
1
4
To stop the tape, press STOP•OPEN 9/.
Fast forwarding/rewinding
Press F.FWD 5/ REW 6 until you reach
your desired passage.
Press 9/ to stop rewinding/fast forwarding.
5
1
2
Helpful hints:
– During playback, the keys are automatically
released at the end of a tape and the set is
switched off (unless PAUSE 8 mode has been
activated.)
–
During fast forwarding/rewinding, the keys will
not be released at the end of a tape. To switch
off the set, make sure the cassette keys are also
released.
The making of unauthorized copies of
copy-protected material, including computer programmes, files, broadcasts and
sound recordings, may be an infringement of copyrights and constitute a
criminal offence.This equipment should
not be used for such purposes.
•
•
•
The best recording level is set automatically.
Altering the VOLUME or DBB will not
affect the recording.
For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have
not yet been broken.This deck is not suited
for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes.
Recording is permissible insofar as copyright
or. other rights of third parties are not
infringed.
General information on recording
•
To protect a tape from accidental erasure,
break out the tabs. If you wish to record again,
cover the tabs with a piece of adhesive tape.
5
•
4
3
2
1
To stop recording, press STOP•OPEN 9/.
For brief interruptions press PAUSE 8. To
resume recording, press PAUSE 8 again.
Playing of the disc/ programme starts automatically from the beginning.You don’t need
to start the player separately.
Press REC 0 to start recording.
Press STOP•OPEN 9/ to open the cassette holder. Insert a blank tape and close
the deck.
Insert a CD, or if desired, program track
numbers.
Select CD source.
CD synchro start recording
6
2
1
Follows steps 3-6 under CD synchro start
recording.
Tune to the desired radio station (see
Tuning to radio station).
Select TUNER source.
Recording from the Radio
3
•
•
•
•
Always close the CD-tape door to avoid dust
on the lens.
Sudden changes in the surrounding
temperature can cause condensation on the
lens of your CD player. Playing a CD is then
not possible. Do not attempt to clean the
lens but leave the set in a warm environment
until the moisture evaporates.
The lens of the CD player should never be
touched!
If the CD player cannot read CDs correctly,
use a cleaning CD to clean the lens before
taking the set to repair.
Press PLAY and clean the roller C.
•
•
•
•
•
•
•
•
The mechanical parts of the set contain
self-lubricating bearings and must not be oiled
or lubricated.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
Do not cover the ventilation openings with
items such as newspapers, table-cloths, curtains, etc.
Adequate ventilation with a minimum gap of
15cm (6 inches) between the ventilation
holes and surrounding surfaces is necessary
to prevent heat build-up.
The apparatus shall not be exposed to dripping or splashing.
Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.
Place the set on a flat, hard and stable surface
so that the system does not tilt.
Safety information
•
To clean the set, use a dry cloth. Do not use
any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
Maintenance & safety (See 9)
•
To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.
CD player and CD handling
•
Never write on a CD or attach any stickers
to it.
Tape deck maintenance
To ensure quality recording and playback of
the tape deck, clean parts A, B and C as
shown, once a month. Use a cotton bud
slightly moistened with alcohol or a special
head cleaning fluid to clean the deck.
2
Press PAUSE and clean the heads A, and
the capstan B.
Open the cassette holder by pressing
STOP•EJECT.
3
1
4
After cleaning, press STOP•EJECT.
➜ Cleaning of the heads can also be done by
playing a cleaning cassette through once.
Troubleshooting
CD damaged or dirty
Replace or clean CD
Program/Shuffle is active
Quit program/shuffle mode
– Cassette tab(s) may be broken
• Apply adhesive tape over the missing tab space
Recording does not work
– Dust and dirt on the heads, etc.
• Clean deck parts, see Maintenance
– Use of incompatible cassette types (METAL or
CHROME)
• Only use NORMAL (IEC I) for recording
Poor cassette sound quality
A CD badly scratch or dirty may result in
improper operation.
Note:
–
•
–
•
The CD skips tracks
Note:
Make sure the CD is not encoded with
Copyright protection technologies, as some
do not conform to the Compact Disc standard.
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING:
Problem
– Possible cause
• Remedy
No sound /power
–
•
–
•
–
•
–
•
–
•
Volume not adjusted
Adjust the VOL
Power cord not securely connected
Connect the AC power cord properly
Batteries dead/ incorrectly inserted
Insert (fresh) batteries correctly
Headphones connected to the set
Disconnect headphones.
CD contains non-audio files
Press TUNING ∞ , § once or more to skip to
a CD audio track, instead of the data file.
Display does not function properly / No
reaction to operation of any of the
controls
– Electrostatic discharge
• Switch off and unplug the set. Reconnect after a
few seconds
No CD inserted
Insert a CD
CD badly scratched or dirty
Replace/ clean CD, see Maintenance
Laser lens steamed up
Wait until lens has cleared
CD-R/CD-RW is blank or not finalized
Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
Nocd indication
–
•
–
•
–
•
–
•
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separated
into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the
European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with
your normal household waste.The correct disposal of your old product will help prevent
potential negative consequences for the environment and human health.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement