Spec Sheet
FULL-SIZED CONVECTION OVEN – 60,000 BTUH – SYNCHRONIZED DOORS
Model COM-GS
The BKI® COM-GS full-size gas convection oven offers 60,000
BTUH of power allowing you to keep your food service operation
running smoothly. The system is powered by an energy efficient
1/4 HP air-cooled fan motor. Our two-speed fan is designed with
a patented wheel-within-a-wheel to enhance air flow within the
cooking chamber.
Dual doors are 60/40 split-type with double-pane thermal
glass, synchronized operation, stainless steel door seals,, and
a single mounted "Cool Touch" handle. Doors are fabricated
with stainless steel inside and out, and fully insulated with 2"
of industrial grade insulation. Safety features include a door
interlock switch which automatically turns the fan and burners
off when the oven door is opened.
The porcelain enamel interiors have 11-position removable rack
guides and 5 racks.
The easy to use rotary controls include quick cool-down
function and 60-minute timer with continuous ring alarm. The
oven is serviceable from the front and offers a full range of
options and accessories.
FEATURES AT A GLANCE
• 60/40 split synchronized
operation and a single handle
• Combination direct/indirect
forced air heat system
• 11-position removable rack
guide with 1 5/8" spacing
• Cool-down fan mode
• Porcelain enamel oven interior
• 150°F (65°C) to 550°F (288°C)
temperature range
INCLUDED RACKS
GAS OPERATION
CONVECTION OVEN
60-MINUTE TIMER
11-Position removable rack
guides with 5 heavy-duty,
chrome-plated wire racks.
60,000 BTUH per oven with
options for natural or
propane gas.
1/4 HP air-cooled, two-speed
fan motor with patented wheelwithin-a-wheel fan.
60-minute timer with continuous
ring alarm with manual shut-off.
bkideas.com
© BKI LI0283C/08-06
Specifications are subject to
change without notice.
BKI North America
PO Box 80400
Simpsonville, SC 29680-0400 USA
Telephone: (864) 963-3471
Toll Free: (800) 927-6887
FULL-SIZED CONVECTION OVEN – 60,000 BTUH – SYNCHRONIZED DOORS
Model COM-GS
EQUIPMENT DIMENSIONS
39"
(991 mm)
41 9/16"
(1056 mm)
22 1/4"
( 566.7mm)
32”
(813 mm)
20"
( 508mm)
63 3/8"
(1610 mm)
38"
( 963mm)
MECHANICAL SPECIFICATIONS
VENT HOOD
CLEARANCES
DIRECT VENTING
CLEARANCES
DimensionUncrated
Crated
Height
63 3/8" (1610 mm)
38 1/4" (972 mm)
Left
1" (25 mm)
Left
3" (76 mm)
Width
39" (991 mm)
43" (1092 mm)
Right
1" (25 mm)
Right
1" (25 mm)
Depth
41 9/16" (1056 mm)
48 1/4" (1226 mm)
Back
3" (76mm)
Back
3" (76mm)
565 (256 kg)
Suitable for installation on combustible floors when installed on factory supplied
legs or casters.
Weight
ELECTRICAL OPTIONS
Volts Phase
Cycle/HzkW
Amps Wires
1201
60
3.5 2
17.58
NATURAL GAS SUPPLY
RPM LOW - HIGH
BTUH
900 - 1,725
• 60,000
PROPANE GAS SUPPLY
Manifold Pressure WC/Mbar
3.5"/9 min.
Manifold Pressure WC/Mbar
10"/25 max.
Inlet Pressure WC/Mbar
7"/17.5 min.
Inlet Pressure WC/Mbar
11"/27 min.
Rear Connection
1/2" NPT
Rear Connection
1/2" NPT
OPTIONS
• Moisture injection with front panel
controls
• Stainless steel undershelf
• Solid doors
• Heavy-duty caster set, two with locks
• Open rack stand with rack supports.
• Perforated rear panel
• Stainless steel legs with or without
casters
• International voltages. 50hz
Visit bkideas.com to view all
accessories available for this model.
5.20.2016
bkideas.com
© BKI LI0283C/08-06
Specifications are subject to
change without notice.
BKI North America
PO Box 80400
Simpsonville, SC 29680-0400 USA
Telephone: (864) 963-3471
Toll Free: (800) 927-6887
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising