Technical Specification Contour 1.3 SE

Technical Specification Contour 1.3 SE
Sensitivity (2.83 V/1 m):
85 dB
Recommended Amp. Power:
Small size rooms:
Medium size rooms:
Large size rooms:
>30 watts
>80 watts
-- watts
IEC Long Term Power Handling:
170 watts
Impedance, Nominal:
Impedance, (20 - 200 Hz):
Impedance, (200 - 20 kHz):
Impedance, Phase Shift (20 - 200 Hz):
Impedance, Phase Shift (200 - 20 kHz):
Impedance, HF (200 kHz):
6 ohms
3.6 - 23.9 ohms
3.7 - 6.1 ohms
-53.2° - +28.5°
-5.0° - +12.0°
6.9 ohms
Frequency Response (+/- 3 dB):
37 Hz - 27 kHz
Resonance Frequency:
41 Hz
Internal Cabinet Volume:
11.8 litres
Bass Principle:
Bass reflex
Weight:
10.1 kg
Dimensions (W x H x L):
Crossover:
204 x 380 x 293 mm
2 way. The crossover is impedance corrected
Crossover Frequencies:
2600 Hz
Crossover Slope:
6 dB/oct
Connection:
Dynaudio Terminal with WBT Gold binding posts
Recommended Placing:
Remarks:
Stand
Tweeter: 28 mm soft dome.
Magnetic fluid.
4 mm die cast aluminium front.
Pure aluminium wire voice coil.
Double magnet system with rear chamber.
Woofer: 17 cm one-piece moulded MSP
polypropylene cone.
Extra long 75 mm aluminium wire
voice coil for long-throw excursion.
Neodymium magnet with XL-magnet
(double magnet system).
Kapton voice coil former.
Cabinet: Front baffle in 20 mm MDF.
Port plugs included.
Bird’s eye maple veneer.
Titan drivers and terminal
Terminal is a metal plate with CE
compliant insulated WBT gold binding posts.
The crossover is phase-aligned.
High quality crossover components only.
Data Sheet
Technical Specification Contour 1.3 SE
DYNAUDIO Vertriebs GmbH
Ohepark 2
21224 Rosengarten-Nenndorf
Telefon 04108 - 4180 - 0
Telefax 04108 - 4180 - 10
e-Mail: sales@dynaudio.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising