Runco TH-42PZ700EA, DTV-873, TH-42PZ700U, TH-42PZ700 Operating instructions
Operating Instructions 42”/50”/58” Class 1080p Plasma HDTV (41.6/49.9/58.0 inches measured diagonally) Manual de instrucciones Television de alta definición de 1080p y clase 42”/50”/58” de Plasma (41,649,9/58,0 pulgadas medidas diagonalmente) Model No. Número de modelo Quick Start Guide TH-42PZ700U TH-50PZ700U TH-58PZ700U (See page 6) Guía de inicio rápido (vea la página 6) For assistance (U.S.A.), please call: 1-888-VIEW-PTV (843-9788) or visit us at www.panasonic.com/contactinfo For assistance (Puerto Rico), please call: 787-750-4300 or visit us at www.panasonic.com For assistance (Canada), please call: 1-800-561-5505 or visit us at www.panasonic.ca Para solicitar ayuda (EE.UU.), llame al: 1-888-VIEW-PTV (843-9788) ó visítenos en www.panasonic.com/contactinfo Para solicitar ayuda (Puerto Rico), llame al: 787-750-4300 ó visítenos en www.panasonic.com ViVA HD3D Sound English Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only. Español Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos. TQB2AA0761-2 Turn your own living room into a movie theater! Experience an amazing level of multimedia excitement ViVA HD3D Sound SDHC Logo is a trademark. GalleryPlayer and the GalleryPlayer Logo are trademarks of GalleryPlayer, Inc. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. 2 Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. Contents Please read before using the unit •• Enjoy rich multimedia Safety Precautions ······································· 4 Notes···························································· 5 Quick Start Guide Camcorder Personal computer VCR DVD player Accessories/Optional Accessory ··· 6 To Prevent TV from Falling Over ··· 8 Before Connection ······················ 10 Basic Connection ·························11 Identifying Controls ···················· 17 First Time Setup ·························· 18 Enjoy your TV! Basic Features DVD recorder Set Top Box Watching TV··············································· 20 Viewing from SD Card ······························· 22 Watching Videos and DVDs ······················· 24 Displaying PC Screen on TV ····················· 26 How to Use Menu Functions (picture, sound quality, etc.) ······················· 28 EZ SyncTM “HDAVI ControlTM”····················· 32 Lock ··························································· 34 Editing and Setting Channels ···················· 36 Input Labels/Monitor Out/Closed Caption ······ 38 Using Timer ················································ 40 Operating Peripheral Equipment ··············· 41 Recommended AV Connections ················ 42 Advanced •• •• Advanced Features • •• •• •• • Viewing Amplifier Home theater system •• •• •• Quick Start Guide SD memory card FAQs, etc. EZ Sync™ is a trademark of Matsushita Electric Industrial Co., Ltd. HDAVI Control™ HDAVI Control™ is a trademark of Matsushita Electric Industrial Co., Ltd. Manufactured under license from Dolby Laboratories. DOLBY and the double-D symbol are trademarks of Dolby Laboratories. •• •• •• •• • Remote Control Operation/Code List ········· 44 Ratings List for Lock ·································· 48 Maintenance ·············································· 49 Technical Information ································· 50 FAQ ···························································· 54 Specifications ············································· 56 Limited Warranty (for U.S.A.) ····················· 57 Customer Services Directory (for U. S. A.) ···· 58 Limited Warranty (for Canada) ··················· 59 FAQs, etc. EZ Sync™ 3 Safety Precautions The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. WARNING: The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set (including on shelves above, etc.). Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments / accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected. FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic Corporation of North America could cause harmful interference and would void the user’s authority to operate this device. FCC Declaration of Conformity Model No. TH-42PZ700U, TH-50PZ700U, TH-58PZ700U Responsible Party: Contact Source: email: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Consumer Electronics Company 1-888-VIEW-PTV (843-9788) [email protected] CANADIAN NOTICE: For Models TH-42PZ700U, TH-50PZ700U, TH-58PZ700U This Class B digital apparatus complies with Canadian ICES-003. 4 WARNING/CAUTION ■ If problems occur during use WARNING If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma SMALL PARTS CAN PRESENT CHOKING HAZARD IF TV, unplug the power cord immediately. ACCIDENTALLY SWALLOWED. Continued use of the TV under these conditions might cause KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN. fire or permanent damage to the unit. Have the TV evaluated DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, at an Authorized Service Center. Servicing of the TV by any INCLUDING PACKAGING MATERIALS AND PLASTIC BAGS/SHEETS unauthorized personnel is strongly discouraged due to its TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG high voltage dangerous nature. CHILDREN, CREATING THE POTENTIAL RISK OF SUFFOCATION. If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomes damaged, Set up disconnect the power cord plug immediately. Do not place the Plasma TV on sloped or unstable surfaces. A short may occur, which could cause fire. Contact an The Plasma TV may fall off or tip over. Authorized Service Center for any repairs that need to be Do not place any objects on top of the Plasma TV. made. If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma CAUTION TV, please consult an Authorized Service Center. Do not cover the ventilation holes. This Plasma TV is for use only with the following optional Doing so may cause the Plasma TV to overheat, which can accessories. Use with any other type of optional accessories may cause fire or damage to the Plasma TV. cause instability which could result in the possibility of injury. If using the pedestal, leave a space of 3 15/16 ” (10 cm) or (All of the following accessories are manufactured by more at the top, left and right, 1 49/64 ” (4.5 cm) or more at Matsushita Electric Industrial Co., Ltd.) the bottom, and 2 3/4 ” (7 cm) or more at the rear. • Wall-hanging bracket (Vertical) TY-WK42PV3U (TH-42PZ700U, TH-50PZ700U, TH-58PZ700U) When using the Plasma TV • Wall-hanging bracket (Angled) TY-WK42PR3U Be sure to disconnect all cables before moving the Plasma (TH-42PZ700U, TH-50PZ700U) Always be sure to ask a qualified technician to carry out set-up. TV. Moving the TV with its cables attached might damage the Two or more people are required to install and remove the cables which, in turn, can cause fire or electric shock. television. If two people are not present, the television may Disconnect the power plug from the wall outlet as a safety be dropped, and personal injury may result. precaution before carrying out any cleaning. Transport only in upright position! Electric shocks can result if this is not done. Transporting the unit with its display panel facing upright or Clean the power cable regularly to prevent it from downward may cause damage to the internal circuitry. becoming dusty. Built-up dust on the power cord plug can increase humidity AC Power Supply Cord which might damage the insulation and cause fire. Unplug the The Plasma TV is designed to operate on 120 V AC, 60 Hz. cord from the wall outlet and clean it with a dry cloth. Securely insert the power cord plug as far as it will go. If the plug is not fully inserted, heat may be generated which This Plasma TV radiates infrared rays; therefore, it may affect other infrared communication equipment. could cause fire. If the plug is damaged or the wall socket Install your infrared sensor in a place away from direct or plate is loose, they should not be used. reflected light from your Plasma TV. The included power cord is for use with this unit only. Do not use any power cord other than that provided with this TV. Do not climb up onto the television or use it as a step. (Young children should be made particularly aware of this Doing so may cause fire or electric shocks. caution.) Do not handle the power cord plug with wet hands. If the unit falls over or becomes damaged through misuse, Doing so may cause electric shocks. injury may result. Do not do anything that might damage the power cable. When The TV will still consume some power as long as the power disconnecting the power cable, hold the plug, not the cable. cord is inserted into the wall outlet. Do not make any modifications to, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center. ■ ■ ■ Notes ■ Do not display a still picture for a long time 4:3 This causes the image to remain on the plasma screen (“Image retention”). This is not considered a malfunction and is not covered by the warranty. ■ Setup Typical still images Channel number and other logos Image displayed in 4:3 mode SD Card photo Video game Computer image 12 To prevent “Image retention”, the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed. (p. 55) Do not place the unit where it’s exposed to sunlight or other bright light (including reflections). Use of some types of fluorescent lighting may reduce the remote control’s transmission range. 5 Accessories/Optional Accessory Check you have all the items shown. Accessories Remote Control Transmitter • N2QAYB000100 AC cord Batteries for the Remote Control Transmitter (2) • Antenna Adapter • Cable clamper (2) F-Type for 5C-2V AA Battery Pedestal • • • TBL2AX00231 (TH-50PZ700U) TBL2AX00241 (TH-58PZ700U) TBL2AX00251 (TH-42PZ700U) How to assemble (p.7) Operating Instructions Product Registration Card (U.S.A.) Quick Setup Guide (For viewing HD programming) Customer Care Plan Card (U.S.A.) Installing the remote’s batteries 1 2 Note the correct polarity (+ or -). • Open Close •• Hook Caution Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. not mix old and new batteries. • Do Do not mix different battery types (such as • alkaline and manganese batteries). Do not use rechargeable (Ni-Cd) batteries. • Do not burn or break batteries. Make a note of the remote control codes before changing batteries in case the codes are reset. (p. 41) Optional Accessory Note • • Wall-hanging bracket (vertical) TY-WK42PV3U (TH-42PZ700U, TH-50PZ700U, TH-58PZ700U) • 6 (angle) TY-WK42PR3U (TH-42PZ700U, TH-50PZ700U) • • In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets. Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take steps to prevent the TV from tipping over. Handle the TV carefully during installation since subjecting it to impact or other forces may cause its paneling to crack. Attaching the pedestal to TV ■Assembling the pedestal Pole ( ) • a Fix securely with assembly screws A . (Total 4 screws) Pole ( ) Front Fix with A Accessories A b Pole Assembly screw (4 of each) Front A Pole M5 x 16 (For 42 ”, 50 ”) M6 x 20 (For 58 ”) Align the stamped marks. B M5 x 65 Pole (2) ■Set-up • a Carry out work on a horizontal and level surface. b Quick Start Guide Align the stamped marks. Bottom view Rear side B Hole for pedestal installation Pole Arrow mark • Pole Fix securely with assembly screws B . (Total 4 screws) Label Accessories/Optional Accessory Base (1) Base Warning Do not disassemble or modify the pedestal. Otherwise the TV may fall over and become damaged, and personal injury may result. • Caution Do not use any television or displays other than those given in these Operating Instructions. Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately. During set-up, make sure that all screws are securely tightened. If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result. Use the accessory fall-prevention brackets to secure the TV. If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result. • • • • 7 To Prevent TV from Falling Over The Plasma TV could fall over during an earthquake, etc. We recommend that measures are taken to prevent the Plasma TV from falling over in such an event. The information in this section is designed to reduce the risk of injuries caused by the Plasma TV falling over during an earthquake, etc. However, no measure can guarantee protection against all earthquakes. The precautions in this section are recommendations for providing more secure installation of your plasma TV if you live in an earthquake prone area. • • Securing to a base • Fix pedestal and base together with band. For 42 ” and 50 ” Accessories Band (2) Wood screw Screw (2) (2) • Nominal diameter 4 mm x 10 (for 42 ”) 4 mm x 12 (for 50 ”) For 58 ” Accessories Band (3) 8 Screw (3) • Nominal diameter 4 mm x 12 Wood screw (3) Securing to a wall • Fix to wall or post with strong commercial wire or chain. For 42 ” and 50 ” Remove screw Main screw Accessories Quick Start Guide Main screw Clamp (2) Remove cap Hook securing screw Accessories To Prevent TV from Falling Over For 58 ” Hook Hook (2) Hook securing screw (2) • M8 x 35 9 Before Connection Connected Equipment Introduction (Signal source) ■Watching TV •• VHF/UHF Antenna NTSC (National Television System Committee): Conventional broadcasting or ATSC (Advanced Television Systems Committee): Digital TV Standards include digital high-definition television (HDTV), standard-definition television (SDTV), data broadcasting, multi-channel VHF/UHF Antenna Cable Box/ surround-sound audio and interactive television. Cable Cable Box/Cable You need to subscribe to a cable TV service to enjoy viewing their programming. You can enjoy high-definition programming by subscribing to a high-definition cable box. The connection can be done with the use of HDMI or Component Video cable. • •• • ■Recording/playing back with DVD recorder or VCR • • DVD Recorder This source has higher resolution through interlace or progressive signal. DVD Recorder Connection can be done with the use of Component Video or HDMI cable. VCR Connection can be done with the use of an RF cable and Composite Video/S Video cable. or VCR ■Watching Satellite • You can enjoy high-definition programming by subscribing to high-definition satellite source. Connection can be done with the use of HDMI or Component Video cable. Satellite Receiver Satellite Antenna ■Enjoying Home theater and DVD recorder with • HDMI connection Home theater and DVD Recorder HDMI connection enables you to enjoy higher quality audio and video with a single cable. Home Theater DVD Recorder Note • •• If your Panasonic DVD Recorder is compatible with EZ Sync (HDAVI control 2), you can operate your Panasonic DVD Recorder with this TV’s remote control (p. 25 EZ SyncTM). All cables and external equipment shown in this book are not supplied with the TV. For the details of the external equipment’s connections, please refer to the operating manuals for the equipment. Reference of connection ■Antenna terminal ■Pin terminals red ■HDMI terminal blue green green • 10 Firmly tighten by hand. •• Match colors of plugs and terminals. Insert firmly. • Insert firmly. Basic Connection Example 1 Connecting Antenna (To watch TV) TV VHF/UHF Antenna Cable TV To connect antenna terminals AC 120 V 60 Hz Cable TV or Back of the TV Basic Connection (Antenna + TV) Before Connection AC Cord (Connect after all the other connections.) Antenna terminal ANTENNA Cable In 1 AV IN Quick Start Guide VHF/UHF Antenna 2 (If no Cable Box) or ANT OUT ANT IN •• If using Cable Box Set the TV channel to CH3 or CH4. Cable Box Note •• When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. For additional assistance, visit us at: www.panasonic.com www.panasonic.ca 11 Basic Connection (Continued) Example 2 Connecting DVD recorder (VCR) (To record/playback) TV VHF/UHF Antenna AV Equipment (e.g. DVD Recorder or VCR) To connect antenna terminals VHF/UHF Antenna AC 120 V 60 Hz AC Cord Back of the TV R Antenna terminal L HDMI 1 AUDIO IN Y Y S VIDEO PB PR L PR L L L L R RR R R TO AUDIO AMP VIDEO VIDEO PB AUDIO AUDIO COMPONENT VIDEO INPUT INPUT PROG OUT INPUT 1 2 2 1 ANTENNA Cable In DIGITAL AUDIO OUT 1 AV IN 2 AUDIO IN PC HDMI 2 AUDIO IN To use PROG OUT terminals (p. 42, 43) To use HDMI terminals (next page) To use S VIDEO terminals (next page) ANT OUT ANT IN To use COMPOSITE terminals (next page) To use COMPONENT terminals (next page) 12 AV Equipment (e.g. DVD Recorder or VCR) (with TV tuner) ■To use HDMI terminals AV Equipment 1 AV IN HDMI AV OUT 2 e.g. DVD Recorder Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound. ■To use COMPONENT terminals Y Y Y PB PB PR L PR L blue blue red red green PB AUDIO R white white AUDIO red red Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below) ■ To use COMPOSITE terminals PR L L L AV Equipment yellow yellow yellow L white R IDEO 2 red INPUT INPUT 2 1 red white R red or e.g. VCR ■To use S VIDEO terminals S VIDEO Standard-Definition white RR e.g. DVD Recorder COMPOSITE OUT S VIDEO OUT Basic Connection (TV + DVD Recorder or VCR) R OUT COMPONENT VIDEO INPUT 1 2 • e.g. DVD Recorder L red AV Equipment red white R COMPONENT VIDEO OUT blue PR Quick Start Guide green green VIDEO High-Definition • AV Equipment e.g. DVD Recorder L L L white white R R TO AU red red or white AUDIO R OUT red e.g. VCR NPUT INPUT PROG 2 1 • •• • The S Video input will override the composite video signal when S Video cable is connected. Connect either S Video or Video cable. • Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite terminals. Note Some programs contain a copyright protection signal to prevent recording. When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor. For the details of the external equipment’s connections, please refer to the operating manuals for the equipment. 13 Basic Connection (Continued) Example 3 Connecting DVD recorder (VCR) and satellite receiver TV DVD Recorder or VCR Satellite Receiver VHF/UHF Antenna To connect antenna terminals VHF/UHF Antenna AC 120 V 60 Hz AC Cord Back of the TV R Antenna terminal L HDMI 1 AUDIO IN Y Y PR L PR L L VIDEO PB S VIDEO VIDEO PB L R R TO AUDIO AMP COMPONENT VIDEO INPUT INPUT PROG OUT INPUT 1 2 2 1 AUDIO RR 1 AV IN 2 L AUDIO R ANTENNA Cable In DIGITAL AUDIO OUT AUDIO IN PC HDMI 2 AUDIO IN To use S VIDEO terminals (p. 13) To use HDMI terminals (p. 13) ANT OUT To use COMPOSITE terminals (p. 13) To use COMPONENT terminals (p. 13) DVD Recorder or VCR (with TV tuner) ANT IN Satellite Receiver Connecting TV and DVD recorder (VCR) Connect in the same way as on p. 13. 14 ANT IN ■To use COMPOSITE terminals DVD Recorder or red white red yellow yellow L white red white R COMPOSITE OUT Satellite Receiver red Quick Start Guide ■To use S VIDEO terminals S VIDEO IN S VIDEO OUT DVD Recorder or AUDIO IN • • L L white white white white R R red red red Satellite Receiver AUDIO OUT red The S Video input will override the composite video signal when S Video cable is connected. Connect either S Video or Video cable. Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite terminals. Note For the details of the external equipment’s connections, please refer to the operating manuals for the equipment. Basic Connection (TV + DVD Recorder or VCR + Satellite receiver) To Connect DVD Recorder/ VCR and satellite receiver white R VCR VCR • COMPOSITE IN yellow yellow L 15 Basic Connection (Continued) Example 4 Connecting Home Theater and DVD recorder TV Home Theater DVD Recorder To connect HDMI terminals Back of the TV HDMI AV IN DIGITAL AUDIO IN DIGITAL AUDIO OUT VIDEO 1 AV IN HDMI AV OUT 2 Home Theater (AV amp) or AUDIO IN Home theater Home theater (DIGITAL AUDIO IN) (When listening to TV audio) [ATSC only] (HDMI AV OUT) •• • Note It is recommended that you use Panasonic’s HDMI cable. (P. 32) When Using the COMPONENT VIDEO OUT terminals or the S VIDEO OUT terminal, refer to p. 13 “To use COMPONENT terminals” or “To use S VIDEO terminals”. If you connect RAM theater or Player theater with HDMI cable, use audio cable instead of the optical digital audio cable. (p. 43) DVD Recorder HDMI AV OUT Cable Binding Instructions To fix To release Push until it clicks Cable clamper AC cord To open To shut Press catch in and pull away To remove from the TV Push both side hooks To attach To fasten To loosen Band • •• 16 tab Do not bundle the RF cable and AC cord together (could cause distorted image). Fix cables with Cable clamper and Band as necessary. When using the options, follow the option’s assembly manual to fix cables. Accessories Insert Band (2) (Supplied with Pedestal) Identifying Controls Display the Main menu. Choose menu and submenu entry. Switches TV/VIDEO SD CARD slot Video Input 3 connector Selects channels in sequence (Move cursor up or down during menu mode.) Volume up/down (Move cursor right or left during menu mode.) Remote control sensor Swing up the door at “PULL”. C.A.T.S. sensor Plasma C.A.T.S. (Contrast Automatic Tracking System). (p. 28) Power indicator (on: red, off: no light) • Note The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet. EZ Sync menu (p. 25, 32-33) Viewing from SD Card (p. 22-23) Selects Audio Mode for TV viewing (p. 20) The equipment selection button (p. 24) Displays Main Menu (p. 28) Changes the input mode (p. 24) Exits menus Selects/OK/Change SUB MENU Displays Sub Menu (p. 20, 30) Returns to previous menu Colored buttons (used for various functions) (for example p. 22, 36) Volume up/down Channel up/down Displays or removes the channel banner (p. 20) Changes aspect ratio (p. 21) Sound mute On/Off Operates the Favorite channel list function. (p. 21) Switches to previously viewed channel and input modes. Numeric keypad to select any channel (p. 20) or press to enter alphanumeric input in menus. (p. 24, 25, 34, 36, 41) - Direct channel access for DTV and DBS (p. 20) Identifying Controls Basic Connection (TV + Home Theater + DVD Recorder) Switches TV to On or Standby Quick Start Guide POWER button External equipment operations (VCRs, DVDs, etc.) (p. 24) 17 First Time Setup “First time setup” is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 30-31) is set to “No”. or 1 Turn the TV On with the POWER button or (TV) 2 (Remote) Select your language First time setup next Language Clock Auto program Picture Language Language English select English Español Français Go back to previous screen. ■ Press to exit from menu screen 3 Adjust the clock First time setup next Language Clock ■ Press to return to previous screen select Auto program Picture Clock 2007 Year • Note To change setting (Language/Clock/Auto program/Picture) later, go to Menu screen (p. 28, 30) Month 1 Day 7 Hour 10 AM Minute Year: Month: Day: Hour: Minute: set select item 10 Select the year Select the month Select the day Adjust the hour Adjust the minute Go back to previous screen. 18 4 Auto channel setup Select “Auto program” First time setup next Language Clock select Auto program Picture Select “ANT in” set Program channel Auto select Cable: Cable TV Antenna: Antenna Select “Auto” Program channel next Cable ANT in Auto select Auto program ok All channels Analog only select Digital only Start scanning the channels Auto program Scanning digital channel progress Quit menu screen First Time Setup Select scanning mode (ALL channels/Analog only/Digital only) ■ Press to exit from Quick Start Guide Cable ANT in ANT in 40% • Available channels (analog/digital) are automatically set. All channels: Scans digital and analog channels Analog only: Scans Analog channels only Digital only: Scans Digital channels only 5 Confirm registered channels program • Note About broadcasting systems Analog (NTSC): traditional TV programming Digital (ATSC): new programming that allows you to view more channels featuring high-quality video and sound Apply Caption Cancel Favorite Add . ... Yes . ... Yes . ... Yes •• select “Apply” ok If OK is not pressed after selecting “Apply”, the channels will not be saved. If you perform scanning more than twice, previously saved channels are erased. First time setup Language Clock Auto program Picture (Refer to p. 28) 19 Watching TV Connect the TV to a cable box/cable, set-top-box, satellite box, or antenna cable (p. 10-15) 1 Turn power on 2 Select a channel number up or down SUB MENU • ■ To directly input the digital channel Note If the mode is not TV, press and select TV. (p. 24) number - When tuning to a digital channel, press the button to enter the minor number in a compound channel number. - example: CH15-1: - ■ Other Useful Functions (Operate after ) ■ Selects Audio Mode for watching TV Listen with SAP (Secondary Audio Program) • Digital mode Press SAP to select the next audio track (if available) when receiving a digital channel. Audio track 1 of 2 (English) • Analog mode Press SAP to select the desired audio mode. • Each press of SAP will change the audio mode. (Stereo/SAP/Mono) ■ Press SUB MENU to show sub menu screen. (p. 30) This menu consists of shortcuts to convenient functions. Display the SUB MENU SUB MENU Setup SUB MENU Surf mode All Set favorite CC Off Caption select Signal meter ■ Displays or removes the channel banner. Channel Information Recall THE NEWS 15-2 12:30 pm ABC-HD CC SAP TV-G 1080i Standard 4:3 30 Station SAP Signal identifier indication resolution Closed caption Rating Level 20 Clock Picture mode Sleep timer remaining time Aspect ratio ■ Press ASPECT to cycle through the aspect modes. (p. 50) Change aspect ratio • 480i, 480p: FULL/JUST/4:3/ZOOM • 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM ■ FAVORITE Call up a favorite channel • • Channel numbers registered in Favorite are displayed on the favorite tune screen. Select the desired broadcast station with the cursor or use number buttons. (see below) Note Reselect “Cable” or “Antenna” in “ANT in” of “Program channel” to switch the signal reception between cable TV and antenna. (p. 19, 37) The channel number and volume level remain the same even after the TV is turned off. Set Favorite Feature Use Favorite Feature 1 Display the SUB MENU. 1 Setup SUB MENU SUB MENU Surf mode All Set favorite Off CC Caption select Favorite channels 1/3 Signal meter 2 Setup SUB MENU All Surf mode 1 26-1 select 2 “Set favorite” 3 Set favorite --- ok Caption select Signal meter 2 Set favorite 1 --- 2 --- 3 --- 4 --- 3 1/3 select ok Set favorite 1 26-1 1/3 --- 2 3 4 • • select • Press FAVORITE repeatedly to change between pages (1/3, 2/3, 3/3, or exit). Press ▲▼to highlight a position on the list. Then, press OK to save the displayed channel in that position. • You can also use the NUMBER buttons (1-9 and 0) to select a list number (1-9 and 0). By doing so, the displayed channel will be saved on that list number without pressing OK. 3 ok Press ▲▼ or a Numbered key (1-9 and 0) to highlight a channel on the list. • Selecting a channel number from the list with the number button will display the channel directly. Watching TV 4 Off CC Viewing Press FAVORITE. • Press FAVORITE repeatedly to change between pages (1/3, 2/3, 3/3, or exit). Press OK to display the highlighted channel. To delete a favorite channel A saved channel can be removed from the list by holding down OK while its position is highlighted. To change the page Pressing ◄ changes the page backward. Pressing ► changes the page forward. 21 Viewing from SD Card You can view photos taken with a digital camera or digital video camera and saved on an SD card. (Media other than SD Cards may not be reproduced properly.) • • Open the cover • Insert the card SD Card Label surface Blue LED Press in lightly on SD Card, then release. Push until a click is heard • • Remove the card Compliant card type (maximum capacity): SDHC Card (4 GB), SD Card (2 GB), miniSD Card (1 GB) (requiring miniSD Card adapter) Blue LED lights while SD Card is inserted if set “SD card LED” to “On” in Setup Menu (p. 30). Insert the SD Card 1 • 2 For cautions and details on SD Cards (p. 51) Select the SD mode or Display menu Select “Memory card” 3 Select the data to be viewed Thumbnail view select Photo viewer 12 Total Information 101-0365 No. 101-0366 101-0367 101-0368 101-0365 view Date 01/01/2007 Pixel 1600x1200 101-0369 101-0370 101-0371 101-0372 Accessing ■ Press to return to TV OK RETURN 101-0373 101-0374 101-0375 101-0376 R Slide show G B Y ■ Press to exit from menu screen Present status (While reading the data) Navigation area Select Selected picture information is displayed. No.: Image number or file name is displayed. Date: Date of recording is displayed. Pixel: Display resolution is displayed. Accessing Rotate Prev. Accessing Next RETURN R Slide show G B Y ■ Press to return to the previous screen 22 Prev. R G Single Pause Next RETURN B Y Total number of images (to Slide show) • (to Single photo display) Note Depending on the JPEG format, “Information” contents may not be displayed correctly. Refer to p. 51 (Data format for SD card browsing) for details. View 4 Rotate 90 degrees (counter-clockwise) To next photo Rotate 90 degrees (clockwise) To previous photo Rotate Prev. • Next RETURN R Slide show G B Y To display/hide Navigation area Displays one at a time Navigation area To change the view (Slide show mode, adjusting images, etc.) ■To watch photos in Slide show mode In or JPEG menu Picture JPEG setup Select ok You can set how many seconds each image is displayed in Slide show mode. (1-10/15/20/30/45/60/120 sec) Turn the slide show Repeat function On or Off. Note For large image sizes, the display time will be longer than the number of seconds set. To stop in mid-cycle Press ■ To adjust picture When MENU is pressed, the “JPEG menu” is displayed. In or Picture JPEG menu Select Set Normal Picture JPEG setup 1/2 select “Picture” Vivid Picture mode 0 OK Picture RETURN Brightness 0 ok Color 0 Tint 0 Viewing from SD Card •• On Repeat Viewing Repeat 5 Disp. time OK RETURN Disp. time JPEG setup select “JPEG setup” Sharpness 0 Picture menu (p. 28) Viewing from a GalleryPlayer SD Card You can view high-definition art and photography purchased on or downloaded to an SD card. GalleryPlayer provides pre-loaded SD cards with copy-protected imagery and images for download to your computer that can be saved on an SD card for display on your television. GalleryPlayer images are available for a fee from GalleryPlayer, Inc. 23 Watching Videos and DVDs If you have some equipment connected to the TV, you can easily watch videos and DVDs using the TV’s remote control. Input Select You can select the external equipment to access. To operate other manufacturers’ equipment, you need to register the code of the equipment. (p. 41) 1 2 With the connected equipment turned On Display the Input select menu Select the input mode Press corresponding NUMBER button on the remote control to select the input of your choice. Input select 1 TV 2 Component 1 3 Component 2 or 4 HDMI 1 select 5 HDMI 2 6 Video 1 enter 7 Video 2 Select the input of your choice, then press OK. • 8 Video 3 • 9 PC (example) Terminal Label Video 1 VCR During the selection, if no action is taken for several seconds, the “Input select” menu disappears. The terminal and label of the connected equipment is indicated. To label each of the inputs please refer to p. 38-39. (example) 3 4 ■ To return to TV • 24 Note For details, see the manual of the equipment. Select the remote control mode Press the key to select Operate the connected equipment, pointing remote control at the equipment. (example) VCR MODE DVD MODE VCR Record Record - Skip Reverse/Forward Rewind/Fast Forward Reverse/Forward Stop Stop Pause Pause Play Play (For other operations, see p. 44) EZ SyncTM If you connect equipment that has “HDAVI Control 2” function to a TV with HDMI cable, you can enjoy using more convenient functions. For details, refer to “EZ Sync Control” on p. 32-33. 1 2 Display EZ Sync menu Select the equipment select Home theater enter HD camcorder Speaker output Viewing DVD recorder TV Operate You can operate the selected equipment with the TV’s remote control. Follow the menu of the equipment and enjoy watching. For the remote control operations, refer to p. 32. • Note For details, see the manual for the equipment or ask your local dealer. Watching Videos and DVDs 3 ■ To return to TV 25 Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC (p. 42) 1 Display the Input select menu Input select 1 TV 2 Component 1 3 Component 2 4 HDMI 1 5 HDMI 2 6 Video 1 7 Video 2 8 Video 3 9 PC 2 Select “PC” PC • Corresponding signals (p. 53) Displays PC screen ■ To return to TV 26 ■ PC menu setting (changed as desired) • Making settings Menu “How to Use Menu Functions” Item to (p. 28) Adjustments/Configurations (options) Normal Resets PC adjust (Set/No) Sync •• Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred. H & V: The H and V sync signals are input from the HD/VD connector. (p. 53) On G: Uses a synchronized signal on the Video G signal, which is input from the G connector. (p. 53) Adjust the horizontal position. H-position Picture Adjust the vertical position. V-position Input resolution Switches to wide display. Input signal switched from VGA to WVGA Input signal switched from XGA to WXGA H-frequency V-frequency Displays the H (Horizontal)/V (Vertical) frequencies. Display range Horizontal: 15 - 110 kHz Vertical: 48 - 120 Hz •• • Audio menu (p. 28) For PC input, only audio signals can be output from PROG OUT terminals. Displaying PC Screen on TV Clock phase Alleviates the problem if the whole picture appears to flicker or is blurred. First adjust the Dot Clock to get the best possible picture, then adjust the Clock Phase so that a clear picture appears. Note It may not be possible to display a clear picture due to poor input signals. Viewing •• PC adjust 27 How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV in your own way. Menu EZ Sync 1 ■ Menu list Display menu Item DVD recorder, Home theater, HD camcorder, Speaker output Normal Picture mode • 2 Displays the functions that can be set (varies according to the input signal) Picture, Brightness, Color, Tint, Sharpness Color temp. Color mgmt. Select the menu Menu C.A.T.S. select Zoom adjust Picture next Audio Timer Picture EZ Sync PC adjust Video NR 3D Y/C filter Lock Color matrix Other adjust Memory card Setup 3 Select the item Picture 1/2 Black level 3:2 pulldown HD Size Vivid Picture mode Picture Mosquito NR select Set Normal Block NR Normal 0 Brightness 0 Bass Color 0 Treble Tint 0 Balance Sharpness 0 AI sound (example: Picture menu) menu screen 4 Adjust or select Picture ■ Press to return Normal to the previous screen Picture 1/2 Set Vivid Picture mode 0 Color 0 Tint 0 (example: Picture menu) BBE Surround Speaker output HDMI 1 in HDMI 2 in Brightness 0 Sharpness 0 28 adjust or select BBE VIVA 3D Other adjust Audio ■ Press to exit from Audio leveler Timer Sleep, Timer 1-5 Lock Memory Memory card Card Adjustments/Configurations (alternatives) [DVD recorder/Home theater/HD camcorder] Select equipment to access and operate. (p. 32) [Speaker output] Select audio output. (Home theater/TV) (p. 32) EZ Sync menu is accessible directly by pressing the EZ Sync button on the remote control. Resets all picture adjustments to factory default settings except for “Other adjust” (Set/No) (p. 25) Basic picture mode (Vivid/Standard/Cinema/Custom) (p. 52) Adjusts color, brightness, etc. for each picture mode to suit your taste Set Normal Vivid Picture mode Picture +20 Tint 0 Brightness 0 Sharpness 0 Color 0 Cool On: Enhances green and blue color reproduction, especially outdoor scenes. (On/Off) Color mgmt. On Adjusts the brightness and gradation accordingly, to optimize contrast. (Off/On) C.A.T.S. Off Adjusts vertical alignment and size when aspect setting is “ZOOM” (p. 50) Zoom adjust Sets PC display (p. 27) PC adjust Reduces noise, commonly called snow. Leave it off when receiving a strong signal. (Off/On) Video NR Off Minimizes noise and cross-color in the picture. (On/Off) 3D Y/C filter Off Selects image resolution of component-connected devices (HD/SD) SD: Standard Definition HD: High Definition Only 480p signal accepted; regular TV (NTSC) is not available. Color matrix SD Reduces noise of specific digital signals of DVD, STB, etc. (On/Off) Block NR Off Reduces HDTV flicker noise in the contoured sections of an image (Off/On) Mosquito NR Off Selects Dark or Light. Valid only for external input signals. (Dark/Light) Black level Transfers film to video. (On/Off) 3:2 pulldown Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning area when HDTV. (Size 1/ Size 2) Select “Size 1” if noise is generated on the edges of the screen. Size 1: Selected item for “HD size”. Scanning 95% Size 2: Selected item for “HD size”. Scanning 100% HD Size size1 Resets Bass, Treble and Balance adjustments to factory default settings. (Set/No) Normal Set Increases or decreases the bass response. Bass +4 Increases or decreases the treble response. Treble 0 Emphasizes the left / right speaker volume. Balance 0 Equalizes overall volume levels across all channels and external inputs. (On/Off) AI sound On BBE VIVA 3D On BBE On Surround Off Speaker output On BBE ViVA HD3D (High-Definition 3D) Sound provides musically accurate natural 3D image with Hi-Fi sound. The clarity of the sound is improved by BBE while the width, depth and height of sound image are expanded by BBE’s proprietary 3D sound process. BBE ViVA HD3D Sound is compatible with all TV programs including news, music, dramas, movies, sports and electronic games. (On/Off) BBE High Definition Sound restores clarity and presence for better speech intelligibility and musical realism. (On/Off) Enhances audio response when listening to stereo. (On/Off) Switches to “Off” when using external speakers (On/Off) “AI sound”, “Surround”, and “Audio leveler” do not work if “Off” is selected Light Off Selects according to the signal when HDMI is connected (Auto/Digital/Analog) Auto: Automatically selects Analog / Digital signal HDMI1 in Auto HDMI2 in Auto Minimizes volume disparity after switching to external inputs Audio leveler 0 The TV can automatically turn On/Off at the designated date and time (p. 40) Sleep Advanced Color temp. How to Use Menu Functions (picture, sound quality, etc.) Selects level of warm colors (red) and cool colors (blue) (Cool/Normal/Warm) 60 Locks the channels and programs (p. 34) Displays SD card data (p. 22) • In AV mode, the Audio menu and Setup menu give fewer options. Memory card 29 How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV in the way best suited for you. 1 ■ Menu list Menu Item Surf mode Display menu Language Clock Program channel 2 External devices • Displays the functions that can be set (varies according to the input signal) Select “Setup” next Menu EZ Sync select Picture Lock Memory card Setup EZ Sync setting Timer 3 1/2 EZ Sync Power off link Power on link Default speakers Auto power on Select the item Setup Monitor out CC Audio Setup Input labels next Side bar Surf mode ■ Press to exit from All menu screen select Other adjust Language Clock Program channel External devices ■ Press to return CC to the previous screen No signal shut-off No action shut-off 1 SD card LED Display Sub Menu About SUB MENU Reset 2 Setup SUB MENU Caption select Signal meter 30 All Set favorite CC select Off set or next Menu Setup SUB MENU Surf mode SUB MENU ■ Sub menu list Select the item Item Surf mode Set favorite CC Caption select Signal meter (Continued) Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (Favorite/All) Favorite: Only channels registered as FAVORITE (p. 37) Surf mode Selects the screen menu language (p. 18) Language Adjusts the clock (p. 18) Clock Sets channels (p. 36) Program channel All Selects the terminal and label of the external equipment (p. 38) [Comp. 1/Comp. 2/HDMI 1/HDMI 2/Video 1/Video 2/Video 3] To prevent howling and image oscillation, stops output of the pictures and audio specified in this menu. (p. 38) (On/Off) CC Controls equipment connected to HDMI terminals (p. 32) (On/Off) “Power off link”, “Power on link”, and “Default speakers” cannot be selected if “Off” is set. EZ Sync On Sets “Power off link” of HDMI connection equipment (p. 32) (Set/No) Power off link Set Sets “Power on link” of HDMI connection equipment (p. 32) (Set/No) Power on link Set Selects the default speakers (p. 32) (TV/Theater) Default speakers TV Auto power on No Side bar Bright No signal shut-off Set No action shut-off No Set to “On”, if you light SD card LED while SD card is inserted. (On/Off) SD card LED On Displays TV version and software license. About Performing Reset will clear all items set with Setup, such as channel settings. (p. 36) Reset Advanced Turns TV On automatically when the cable box or a connected device is turned On (No/Set) The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 40) Change the brightness of the side bar (Bright/Off/Dark/Mid) (4:3 mode only) The recommended setting is “Bright” to prevent panel “Image retention”. (p. 52) To conserve energy, the TV automatically turns off when NO SIGNAL continues more than 10 minutes. (Set/No) Note Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode”, PC input display or Digital channel. “No signal shut-off was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No signal shut-off”. The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. To conserve energy, the TV automatically turns off when no operation of remote or front panel key continues more than 3 hours. (No/Set) Note Not in use when setting “Auto power on”, “On/Off Timer” or PC input display. “No action shut-off was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No action shut off”. The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. How to Use Menu Functions (picture, sound quality, etc.) Displays subtitles (Closed Caption) (p. 38) Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (Favorite/All) Sets favorite channels. (p. 21) Displays Closed Caption. (p. 38) (Off/On) Changes the station identifier. (p. 37) Checks the signal strength if interference or freezing occurs on a digital image. (p. 36) 31 EZ SyncTM “HDAVI ControlTM” Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on one remote. Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 2” function. Connections to some Panasonic equipment (DVD Recorder DIGA, HD Camcorder, RAM theater, Player theater, Amplifier, etc.) with HDMI cables allow you to interface automatically. The equipment with “HDAVI Control” function enables the following operations: Automatic Input Switching, Power on link, Power off link and Speaker control (p. 33). In addition, the equipment with “HDAVI Control 2” function enables the following operation: EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) (p. 33). EZ Sync “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. For the first time / When adding new equipment, reconnecting the equipment or changing the setup. After the connection turn the equipment on and then switch the TV on. Select the input mode to HDMI 1 or HDMI 2 (p. 24), and make sure that an image is displayed correctly. This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. Recommended part number: RP-CDHG15 (4.9 ft/1.5 m), RP-CDHG30 (9.8 ft/3.0 m), RP-CDHG50 (16.4 ft/5.0 m) ■ Automatic Input Switching Speaker control • 1 Display menu 2 Select “Setup” select Menu EZ Sync next Picture SUB MENU EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) Audio Timer Lock Memory card Setup 3 Select “EZ Sync setting” Setup 2/2 select Power on link EZ Sync setting Other adjust next About ■ Press to exit from 4 Select “EZ Sync” EZ Sync setting menu screen ■ Press to return to the previous screen 32 5 EZ Sync On Power off link Set Power on link Set select Default speakers Select “On” (default is On) • Power off link change If no HDMI equipment is connected or standard HDMI equipment (non- “EZ Sync”) is used, set to “Off”. One-touch theater playback At the start of the DIGA, Player theater, or RAM theater playback, the TV’s input automatically switches to the input based on the playback equipment. For the RAM theater, the speakers automatically switch to the theater system. If using the DIGA operation, the TV’s input automatically switches to the DIGA and DIGA menu is displayed. • You can select Home theater, or TV speakers for audio output. Control theater speakers with the TV’s remote control. This function is available only when Panasonic Amplifier or Player theater is connected. ■ Home theater: Press Select “Speaker output” Select “Home theater” or “TV” Volume up / down select DVD recorder Adjustment for equipment change Home theater Speaker output •• • The sound of the TV is muted. When the equipment is turned off, TV speakers become active. Selecting “Home theater” turns the equipment on automatically if it is in standby mode. ■ TV: TV The TV speakers are active. In the EZ Sync menu, you can select HDMI connected Panasonic equipment and access it quickly. Continue using your TV’s remote control to operate the equipment, pointing it at the TV. Press Select the equipment you want to access. ■ Available TV’s remote control buttons Move the cursor/Select select DVD recorder Home theater Set/Access access HD camcorder Speaker output TV Return to the previous menu You can select available items only. SUB MENU Display the Functions menu on the equipment Available when the purpose of the keys is displayed on screen To operate the equipment, read the manual of the equipment. When “Set” is selected (p. 31), TV is turned on automatically and switches to the appropriate HDMI input whenever EZ Sync compatible equipment is initially turned on and Play mode is selected. Advanced Operate the equipment with the TV’s remote control, pointing it at the TV. • EZ SyncTM “HDAVI ControlTM” HD camcorder Mute When “Set” is selected (p. 31) and the TV is turned off, all connected EZ Sync compatible equipment is also automatically turned off. DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode. Caution: The TV remains on even if the EZ Sync compatible equipment is turned off. • “TV” is the default setting. To set the Home Theater system as default speakers, change the default speakers setting from “TV” to “Theater”. Sound will be output from the Home Theater whenever the TV is powered on. If the “ONE TOUCH PLAY” key is pressed on the remote control for Panasonic Home Theater system, the following sequence of operations is performed automatically. Home Theater power switches On, and playback begins. TV power switches On, and the playback screen is displayed. Audio is muted on the TV and switches to the theater system. 33 Lock You can lock specified channels or shows to prevent children from watching objectionable content. 1 Display menu 2 Select “Lock” next Menu EZ Sync Picture You will be asked to enter your password each time you display the Lock menu. select Audio Timer Lock Memory card Setup 3 Input your 4-digit password A 4-digit code must be entered to view a blocked program or change rating settings. • Create password Enter password. If it is your first time entering the password, enter the password twice in order to register it. - - - 0 - 9 ■ Press to exit from menu screen • • 34 Caution Make a note of your password in case you forget it. (If you have forgotten your password, consult your local dealer.) Note When you select a locked channel, a message will be displayed that allows you to view the channel if you input your password. 4 Select the Lock mode Lock Mode Off Channel Off Game Off Program Off set select Change password 5 • Select the item • Lock Mode Custom Channel Off Game Off Program Off select Change password 6 Set • • set Off: Unlocks all the lock settings of “Channel”, “Game” and “Program”. All: Locks all the inputs regardless of the lock settings of “Channel”, “Game” and “Program”. Custom: Locks specified inputs of “Channel”, ”Game” and “Program”. “Channel”, ”Game” and “Program” will grey out unless “Custom” is selected in “Mode”. ■ To select the channel or the rating of the program to be locked Select up to 7 (1-7) channels to be blocked. These channels will be blocked regardless of the program rating. Channel lock Select “Mode” and set to “Custom” Select channel to lock. Channel lock Mode select Custom Channel 1 3 Channel 2 4 Channel 3 - • To lock/unlock all channels: Select “Mode” and set to “All” or “Off”. All: Locks all channels Off: Unlocks all channels set Locks Channel 3, Channel 4 and external inputs. Game lock select Select “Game” in 5 and set to “On”. On: Locks Off: Unlocks set ■ To set a rating level Select the rating to be locked “V-chip” technology enables restricted shows to be locked according to TV ratings. select Select “Mode” and set to “On”. Program lock On Monitor out On MPAA Off U.S.TV Off C.E.L.R. Off C.F.L.R. Off Example of “MPAA” (U.S movie ratings) set On Monitor out On MPAA Off U.S.TV Off C.E.L.R. Off C.F.L.R. Off MPAA: U.S.TV: C.E.L.R.: C.F.L.R.: U.S movie ratings U.S TV program ratings Canadian English ratings Canadian French ratings set select PG-13 R Restricted: Under 17 requires accompanying parent or adult guardian NC-17 X No one 17 and under admitted Adults only • To disable recording of the locked To get more information (p. 48) ■ program Select “Monitor out” and set to “On”. On: Turns on the monitor terminal output for programs that have been set to “Blocked.” Off: Turns off the monitor terminal output for programs that have been set to “Blocked.” Program lock Mode On Monitor out Off MPAA Off U.S.TV Off C.E.L.R. Off C.F.L.R. Off ■ To change the password Change password Parental Guidance Suggested In , select “Change password” and press OK Input the new 4-digit password twice Lock Change password Mode Off Channel Off Game Off Program Off Change password •• • Advanced Mode General Audience: All ages admitted Parents Strongly Cautioned: Inappropriate for children under 13 next Program lock No rating G PG Select the rating category you wish to follow •• •• NR select Lock Program lock Mode Enter new password. - - - 0 - 9 Note This television is designed to support the “Downloadable U.S. Region Rating System” when available. (Available only in U.S.A.) The Off rating is independent of other ratings. When placing a block on a specific-age-based-rating level, the Off rating and any other more restrictive ratings will also be blocked. 35 Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions. 1 Display menu Auto Set automatically 2 Select “Setup” Menu next EZ Sync select Picture Audio Timer Lock Memory card Setup 3 Select “Program channel” Setup 1/2 next Surf mode All select Manual Set manually Language Clock Program channel External devices CC 4 Select the function Program channel ANT in ■ Press to exit from next Cable Auto select Manual menu screen Signal meter 5 Set Signal meter ■ To reset the settings of setup menu Select “Reset” in Setup menu ( ) and press OK Input your 4-digit password with number buttons Select “YES” on the confirmation screen and press OK 36 Check signal strength Automatically searches and adds active channels to memory. Select “ANT in” Select scanning mode (p. 19) Select Cable or Antenna (p. 19) Auto program Select “Auto” Program channel Analog only next Cable ANT in ok All channels select Digital only Auto select Manual •• Signal meter Settings are made automatically After completing the setting, select “Apply”. (see below 5 ). All previously saved channels are erased. • Edit Caption --- Caption Select “Edit” Apply Apply Favorite Add 2 ... ... Yes 3 ... ... Yes 4 ... ... Yes 5 ... ... Yes Caption Caption detail Rename (maximum 7 characters available) Select the station identifier Favorite select next • Select the item to be edited Apply Cancel Cannnel Caption Favorite Add ... Yes ... ... 3 ... ... ... Yes ... ... Yes 6 ... ... ... Yes Favorite ... Yes ... Caption ... 8 9 Add ... Yes ... Yes Select OK RETURN 1 26-1 R Prev. page G Next page B Y next • Caption: Changes the station identifier Favorite: Registers channel to Favorite List Add: Adds or skips channels Select the number Add Press OK to select “Yes (add)” or “No (skip)” Move cursor to channel number Manual program Edit Apply Cannnel Caption Cancel Favorite Add 2 ... ... Yes 3 ... ... Yes 5 Select “Apply” program Go back to previous page Apply select Press OK to tune to the channel. select “Apply” Cancel Caption . Favorite Add ... Yes ok Advanced Proceed to next page --- Set favorite next • • • select 1/3 2 Yes 4 5 7 Set favorite select item to edit (Caption/Favorite/Add) Manual program 2 set/next Cancel Cancel Cannnel Caption Edit change Caption detail Manual program Edit select Caption select Editing and Setting Channels Use this procedure when changing setting of receiving channels or changing the channel display. Also, use to add or skip channels from channel list manually. To cancel the Edit Manual program Edit Apply Cannnel Caption ... 2 Changes will be lost. Continue? Cancel Favorite ... Add Yes 3 ... ... Yes 4 ... ... Yes 5 ... ... Yes select Yes No next ok (returns to “Program channel”) select “Yes” Check the signal strength if interference is found or freezing occurs on a digital image. Signal meter Channel 1-1 • If the signal is weak, check the antenna. If no problem is found, consult your local dealer. ok Signal strength Current 30% Peak level 45% • change channel Signal intensity • • Note Not available if “Cable” is selected in “ANT in” (see above). Effective only for digital antenna channels. If “Lock” (p. 34) is activated and “Program channel” is selected, “Enter password.” will be displayed. 37 Input Labels/Monitor Out/ 1 Display menu Input labels Display labels of external devices 2 Select “Setup” next Menu EZ Sync select Picture Audio Timer Monitor out Lock Stop output of the picture and audio Memory card Setup 3 Select “External devices” or “CC” Setup 1/2 next Surf mode All select Language Clock Program channel External devices CC 4 External devices ■ Press to exit from next CC Input labels menu screen Monitor out 5 38 (External devices) Select “Input labels” or “Monitor out” Set select Display Closed Caption Closed Caption Devices connected to external input terminals can be labeled for easier identification during input selection. (In selecting input mode from p. 24 ) ■ Select the terminal and label of the external equipment select Input labels Comp. 1 Custom Comp. 2 Custom HDMI 1 3 4 Video 1 - Video 2 - Video 3 - PC - Label Terminal Terminals: Comp. 1-2/HDMI 1-2/ Video 1-3/PC Video 1 Label: SKIP*/VCR/DVD/CABLE/ VCR DBS/PVR/GAME/AUX/[BLANK] (for PC terminal, only SKIP and [BLANK] are available) * If “SKIP” is selected, the TV/VIDEO button press will skip its input. [example] To prevent howling and image oscillation, stops output of the pictures and audio specified in this menu. (p. 30) ■ Select the terminal and set “Off” select Monitor out Comp. 1 On Comp. 2 On HDMI 1 On HDMI 2 On Video 1 Off Video 2 On Video 3 On set • • Select “Off” to stop output of picture and audio. (Video 1/Video 2/Video 3) Comp. 1/Comp. 2/HDMI 1/HDMI 2 cannot output video signals regardless of “Monitor out” setting. When equipment (STB, DVD, etc.) is connected to HDMI, COMPONENT or PC terminals, only audio signals can be obtained. From the output terminals, no video signals can be passed. The television includes a built-in decoder that is capable of providing a text display of the audio. The program being viewed must be transmitting Closed Caption (CC) information. (p. 50) ■ Select the item and set select CC On Mode Analog CC1 Digital Primary set Analog CC1-4: Digital setting T1-4: The settings in “Analog” or “Digital” depend on the broadcaster. Select “On” (when not using, select “Off”). (Choose the Closed Caption service of Analog broadcasting.) Information related to pictures (Appears at bottom of screen) Textual information (Appears over entire screen) (The Digital Closed Caption menu lets you configure the way you choose to view the digital captioning.) Select the setting. “Primary”, “Second.”, “Service 3”, “Service 4”, “Service 5”, “Service 6” Digital • Advanced CC reset • Mode Input Labels/Monitor Out/Closed Caption HDMI 2 set • • ■ To make more in-depth display settings in digital programs Select “Digital setting” and press OK Select the item and set Digital setting Size Automatic Font Automatic Style Automatic Foreground Automatic Fore opacity Automatic Background Automatic Back opacity Automatic Outline select set •• •• •• •• Size: Text size Font: Text font Style: Text style (Raised, Depressed, etc.) Foreground: Color of text Fore opacity: Opacity of text Background: Color of text box Back opacity: Opacity of text box Outline: Outline color of text (Identify the setting options on the screen.) Automatic ■ To reset the settings Select “CC reset” and press OK 39 Using Timer The TV can automatically turn On/Off at the designated date and time. •• The Clock must be set before On time/Off time settings. (p. 18) The “Sleep” timer and “On / Off timer” will not function if “Auto power on” (p. 30) is set. 1 Display menu 2 Select “Timer” next Menu EZ Sync select Picture Audio Timer Lock Memory card 3 Select the timer to set select Timer Sleep next Timer 1 Timer 2 Sleep Timer 1 Timer 3 Timer 4 menu screen ■ Press to return to the previous screen ~ ■ Press to exit from Timer 5 4 Turns Off automatically Turns On/Off automatically (5 timers can be set.) Timer 5 Set the timer ■ To set “Sleep” (Off Timer) Set to shut the unit off after a pre-selected amount of time. 0/30/60/90 (minutes) Sleep Sleep 60 set • ■ To set “Timer 1-5” (On/Off Timer) • 40 Note The TV automatically turns Off after 90 minutes when turned On by the Timer. This operation will be cancelled if the Off time is selected or if a key is pressed. Select the item and set Timer 1 Channel select 310 - 1 Day EVR FRI On time 10:00 AM Off time 11:00 AM Set On set Channel Select the channel Day Select the day SUN/MON/TUE/WED/THU/FRI/SAT (displays the nearest future date) MON-FRI/SAT-SUN/DAILY/EVR SUN/EVR MON/ EVR TUE/EVR WED/EVR THU/EVR FRI/ EVR SAT On time The time to turn On Off time The time to turn Off Set Timer setting (On/Off) Operating Peripheral Equipment You can operate other manufacturers’ equipment using this TV’s remote control. 1 2 Connect the external equipment to the TV and Power Off the external equipment + Press both buttons simultaneously for more than 3 seconds. • Release the buttons when the equipment selection buttons start flashing. with the equipment selection button • The selected button remains lit (other buttons are not lit). 4 Input the equipment’s 4-digit remote control code (p. 45-47) 5 Operate the equipment with the remote control (p. 44) • The external equipment turns On. ■ If the equipment does not operate with the ■ Press to return to the TV remote control • • mode When your equipment has a single code Input the remote control code again When your equipment has multiple codes Change the code with above and test again Caution Registration will fail if the wrong code is input or it takes more than 30 seconds to register. To find a code not listed in the code list Advanced • Operating Peripheral Equipment Using Timer Select the equipment 3 This procedure searches all codes and is called the “sequence method.” After step test above, change the code and When the correct code is found store change Operate the equipment with the remote control (p. 44) •• Repeat until the code is found It may take many attempts before the correct code is found 41 Recommended AV Connections These diagrams show our recommendations for how to connect the TV unit to your various equipment. For other connections, consult the instructions for each piece of equipment and the specifications (p. 56). For additional assistance, please visit our website at: www.panasonic.com www.panasonic.ca Front of the TV Back of the TV Cable TV AC 120 V 60 Hz or Cable Box AC Cord (Connect after all the other connections are complete.) R Y Y L HDMI 1 AUDIO IN or S VIDEO PR L PR L L L L R RR R R TO AUDIO AMP or AUDIO COMPONENT VIDEO INPUT INPUT PROG OUT INPUT 1 2 2 1 1 AV IN 2 or AUDIO IN AUDIO PB VIDEO VIDEO PB ANTENNA Cable In DIGITAL AUDIO OUT or PC HDMI 2 AUDIO IN ■ DVD Recorder / VCR Connect with A or B ■ To watch camcorder or images Optical digital audio cable Camcorder VCR DVD Player A Audio cable HDMI cable RGB PC cable B Audio cable (stereo mini) OPTICAL IN Amplifier ■ To watch DVDs DVD Player/Set Top Box • • 42 ■ To listen to the ■ PC TV through speakers Note The picture and audio input signals connected to a terminal specified in “Monitor out” (p. 38) cannot be output from “PROG OUT” terminals. However, audio output can be obtained from “DIGITAL AUDIO OUT” terminal. To prevent howling and image oscillation, set the “Monitor out” setting when connecting the VCR with loop-connection. (p. 30, 38) Conversion adapter (if necessary) HDMI-DVI Conversion cable + Audio cable Computer ■ To watch digital video image DVD Player or Set Top Box (HDMI compatible machines only) • • When equipment (STB, DVD, etc.) is connected to HDMI, COMPONENT or PC, terminals, only audio signals can be obtained. From the output terminals, no video signals can be passed. When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be output through the PROG OUT terminals. EZ SyncTM Connections Follow the connection diagrams below for HDAVI control of a single AV piece of equipment such as a Panasonic DIGADVD recorder, RAM theater, or Player theater system. Refer to page 32-33 for Setup Menu settings and additional control information. Optional HDMI and/or optical cables are not provided. • If connection (or setting) of equipment compatible with HDAVI control is changed, switch the power of this unit Off then On again while the power of all equipment is On (so that the unit can correctly recognize the connected equipment) and check that DIGA, RAM theater, and Player theater playback operate. Note HDMI 1 is recommended. When connecting to HDMI 2, set the input mode to HDMI 2 (p. 24) initially before connecting to HDMI 2. After connection, confirm the HDMI control functions (p. 32-33). ■ Connecting this unit to the DIGA, RAM theater, or Player •• ■ Connecting this unit to a DVD recorder and AV amp For DIGA: Connect with HDMI cable For RAM theater and Player theater: Connect with the HDMI and audio cables. If audio cable is not connected, you cannot listen to the TV program through the theater system. When using an “EZ Sync” audio-video amplifier and a compatible DIGA recorder, use a daisy chain connection as shown below. Digital Audio out PR L PR L L L R R TO AUDIO AMP COMPONENT VIDEO INPUT INPUT PROG OUT INPUT 1 2 2 1 AV IN 2 or AUDIO IN PC HDMI 2 AUDIO IN or HDMI cable HDMI (AV OUT) AUDIO IN HDMI (AV OUT) HDMI (AV OUT) HDMI (AV OUT) HDMI (AV IN) or Panasonic RAM theater / Panasonic Player theater •• ■ DIGA (Panasonic DVD Recorder) Panasonic HD Camcorder Panasonic AV amp Advanced or AUDIO RR 1 L AUDIO R Back of the TV DIGITAL AUDIO OUT VIDEO PB S VIDEO VIDEO PB Recommended AV Connections theater DIGA (Panasonic DVD Recorder) One AV amp and one DIGA recorder can be operated with this unit. Be sure to connect the AV amp between this unit and the DIGA recorder. Setting of this unit after connection After making connections as shown above, set “EZ Sync” (under “EZ Sync setting”) to “On” using the Setup menu. (p. 32-33). • • Note Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals. When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio. (When connecting to an AV amp via HDMI, you can enjoy higher sound quality.) 43 Remote Control Operation/Code List The following explains how to operate external devices with the remote control. Register the remote control codes (p. 41) if you want to operate an external device from another manufacturer. (p. 45-47) • • Note Operation may not be possible depending on the available memory size of the remote control. This remote control is not designed to cover operation of all functions of all models. ■ Remote Control Operation List This chart defines which keys are operational after programming (if needed) while in the selected remote control mode, CABLE, DBS, VCR, or DVD. KEY NAME SUB MENU - 44 DBS/CBL MODE VCR MODE (DBS) DVD MODE (CBL) Power Power Power Power - LIST LIST DVD AUDIO TV Input Switch TV Input Switch TV Input Switch TV Input Switch - Menu Menu Functions - Exit Exit - - Up/Down/Left/Right Up/Down/Right/Left Up/Down/Right/Left - Select Select Enter - Guide Guide Sub Menu - PPV/VOD PPV/VOD Return - Red A Red - Green B Green - Blue C Blue - Yellow D Yellow Channel Up/Down Channel Up/Down Channel Up/Down Channel Up/Down TV Volume Up/Down TV Volume Up/Down TV Volume Up/Down TV Volume Up/Down - Aspect Aspect - - Favorite Favorite Direct Navigator Onscreen Display Info Info/Display/OSD Onscreen Display TV Mute TV Mute TV Mute TV Mute 0-9 0-9 0-9 0-9 - Last Channel Last Channel Drive Select - Sub Channel Music PROG (Sub Channel) - Page Down/Up Page Down/Up Skip Reverse/Forward TV/VCR Switch TV/DBS Switch TV/CBL Switch - Rewind/Fast Forward Rewind/Fast Forward Rewind/Fast Forward Reverse/Forward VCR Record PVR Record *1 PVR Record *1 Record Stop Stop Stop Stop Pause Pause Pause Pause Play Play Play Play *1: Combination type ■ Remote Control Code List Cable Converter ( Brand A-Mark ABC Accuphase Acorn Action Active Americast Archer BCC Bell South British Telecom Century Clearmaster ClearMax Cool Box Coolmax Director Fosgate GE General Instrument ) Code 0008, 0144 0003, 0008, 0237 0003 0237 0237 0237 0899 0237 0276 0899 0003 0008 0883 0883 0883 0883 0476 0276 0144 0003, 0012, 0276, 0476, 0810 Brand Gibralter GMI GoldStar Hamlin Hitachi Insight Jerrold Memorex Mitsubishi Motorola Multitech Nova Vision Novaplex NSC Pace Panasonic Paragon Code 0003 0883 0144 0009, 0273 0003, 0008, 0009 0476, 0810 0003, 0012, 0276, 0476, 0810 0000 0003 0276, 0476, 0810, 1254, 1376 0883 0008 0008 0012 0008, 0237, 0877, 1877 0000, 0008, 0107, 0144 0000, 0008, 0525 Brand Penney Philips Pioneer Sony Sprucer Starcom Supercable Supermax Thomson 1006 0144 0003 0276 0883 1256 Prism Pulsar Quasar RadioShack RCA Regal Runco Samsung Scientific Atlanta Code 0000 0317, 1305 0144, 0533, 0877, 1877 0012 0000 0000 0883 1256 0273, 0276, 0279 0000 0003, 0144 0000, 0003, 0008, 0012, 0237, 0477, 0877, 1877 Brand Tocom Torx Toshiba Tristar United Cable US Electronics V2 Videoway Viewmaster Vision Vortex View Zenith Code 0012 0003 0000 0883 0003, 0276 0003, 0008, 0276 0883 0000 0883 0883 0883 0000, 0525, 0899 Cable/PVR Combination ( ) Americast General Instrument Jerrold Motorola Pace Pioneer RCA 0810, 1376 0237, 1877 0877, 1877 1256 Scientific Atlanta Sony Supercable Thomson 0877, 1877 1006 0276 1256 Zenith 0899 GE General Instrument GOI Hitachi Houston HTS Hughes Network Systems Innova Jerrold JVC LG Magnavox McIntosh Memorex Mitsubishi 0392, 0566 0869 Motorola Netsat Next Level Optimus Panasonic Paysat Philips 0856, 0869 0099 0869 0724 0247, 0701, 1786 0724 0099, 0722, 0724, 0749, 0775, 0819, 1076, 1142, 1442, 1749 Samsung 1108, 1109, 1142, 1276, 1377, 1442, 1609 SKY Sony Star Choice Star Trak Thomson Tivo Toshiba Pioneer Primestar Proscan RadioShack RCA 1142, 1442 0869 0392, 0566 0566, 0775, 0869 0392, 0566, 0775, 1142, 1392, 1442 UltimateTV Uniden Voom Zenith 0856, 0099 0639, 1639, 1640 0869 0869 0392, 0566 1142, 1442 0749, 0790, 0819, 1285, 1749 1392, 1640 0724, 0722 0869 0856, 1856 0899 0810 0810 Satellite Receiver ( Dish Network System Dishpro Echostar Expressvu Funai ) 0775 0216 1109 0099, 0247, 0392, 0566, 0639, 0724, 0749, 0819, 1076, 1108, 1109, 1142, 1377, 1392, 1414, 1442, 1609, 1639, 1640, 1749, 1856 0775, 1005, 1505, 1775 0775, 1005, 1505, 1775 0775, 1005, 1505, 1775 0775, 1775 1377 DBS/PVR Combination (S) ( DirecTV 0099, 0392, 0639, 1076, 1142, 1377, 1392, 1442, 1640 Dish Network System 0775, 1505 VCR ( 0775, 1775 0749, 0819, 1250 0775 0775, 1775 0749, 1142, 1442, 1749 0099 0869 0775, 1775 1414 0722, 0724 0869 0724 0749 ) Dishpro Echostar Expressvu Hughes Network Systems 0775, 1505 0775, 1505 0775 1142, 1442 Motorola Philips Proscan RCA Samsung 0869 1142, 1442 0392 1392 1442 Sony Star Choice 0639, 1640 0869 Asha Astra Audiovox Avis Beaumark Bell & Howell 0240 0035, 0240 0037, 0038, 0278 0000 0240 0000, 0035, 0039, 0048, 0479 0002, 0121, 0209, 0479, 1479 0037 0037, 0038 0035 0002 0240 Carver CCE Cineral Citizen 0035, 0081 0278 0278 0000, 0035, 0037, 0209, 0240, 0278, 0479, 1278 Curtis Mathes 0000, 0035, 0060, 0162, 0240, 0278, 0432, 1035 Cybernex CyberPower Daewoo Classic Colortyme 0037 0035, 0045, 0060, 0278 0000 0037, 0047, 0240 0000 0000, 0035, 0081 0278 0240 1972 0037, 0045, 0278, 1278 0037, 0278 1972 0042, 0081 0739 0000 0038, 0039 0000, 0240 Remote Control Operation/Code List Bell ExpressVu Chaparral Crossdigital DirecTV ) A-Mark Adventura Aiko Aiwa Alba Alienware Allegro America Action American High Amstrad Broksonic Calix Candle Canon Capehart Carrera Colt Craig Criterion Crosley Crown Daytron Dell Denon DirecTV Dual Durabrand Dynatech FAQs, etc. ABS Admiral 0000, 0037, 0240, 0278 1972 0039, 0047, 0048, 0060, 0209, 0479 0000, 0037, 0240 0278 0000, 0037 0209, 0278 1972 0039 0278 0035, 0081 0000 45 Remote Control Operation/Code List (Continued) ■ Remote Control Code List VCR ( ) Brand Electrohome Electrophonic Emerald Emerex Emerson Brand Magnin Marantz Marta Matsui Matsushita Media Center PC MEI Memorex Code 0240 0035, 0038, 0081 0037 0037, 0209 0035, 0162, 0081 1972 0035 0000, 0035, 0037, 0039, 0162, 0047, 0048, 0209, 0240, 0278, 0479, 1237 Brand Quasar Radix Randex RCA 0037 0037 0000, 0035, 0042, 0045, 0048, 0060, 0240, 0807, 0880, 1035, 1060 Metz MGA MGN Technology Microsoft Midland Mind Minolta Mitsubishi 0037 0043, 0060, 0240 0240 1972 0240 1972 0042 0000, 0042, 0043, 0047, 0048, 0060, 0067, 0807 Realistic 0000, 0035, 0037, 0047, 0048, 0121, 0162, 0240, 0278 ReplayTV Ricavision Runco Samsung 0614, 0616 1972 0039 0000, 0038, 0045, 0060, 0240, 0432, 0739, 1014 Motorola MTC MTX Multitech NAD NEC Nikko Nikkodo Nishi Niveus Media Noblex Northgate Olympus Optimus 0035, 0048 0000, 0240 0000 0000, 0039 0240 0038, 0067 0037, 0278 0037, 0278 0240 1972 0240 1972 0035, 0162 0000, 0035, 0037, 0047, 0048, 0162, 0240, 0432, 1062 Samtron Sanky Sansui 0240 0039, 0048 0000, 0002, 0067, 0209, 0240, 0479, 1479 Sanyo 0000, 0047, 0240, 0479 0043, 0045, 0184, 0121 0000, 0033, 0035, 0037, 0039, 0042, 0043, 0045, 0047, 0048, 0060, 0067, 0162, 0209, 1237 1972 0042, 0739 Orion 0000, 0002, 0121, 0184, 0209, 0240, 0278, 0479, 1479 Shintom Shogun Siemens Signature 0739 1972 0000, 0047 1972 0240 0240 0067 0067 0037, 0278 0038, 0067 0035, 0037 0000 0037, 0038, 0240 1972 0000, 0038, 0240 0081 0000, 0240 0278 0000, 0037, 0042, 0067 0240 0000, 0037, 0240, 0278, 1278 0000, 0035, 0037, 0039, 0048, 0081, 0240, 0618, 1781 Panama Panasonic 0035 0000, 0035, 0162, 0225, 0614, 0616, 1035, 1062, 1244 Singer Sonic Blue Sony Penney 0000, 0035, 0037, 0038, 0042, 0047, 0067, 0081, 0162, 0240, 1035, 1237 Fisher Fuji Fujitsu Funai Garrard Gateway GE 0000, 0039, 0047 0033, 0035 0000 0000, 0037, 0278 0000 1972 0000, 0035, 0048, 0060, 0240, 0807, 1035, 1060 Gemini Genexxa Go Video GoldStar 0060 0000, 0037, 0278 0240, 0432, 0614 0000, 0035, 0037, 0038, 0039, 0278, 1237 Goodmans 0000, 0037, 0081, 0278 0000 0042, 0081 0081 0000 0038, 0081 1972 0000, 0035, 0047 0000, 0035, 0037, 0042, 0045, 0089 1972 Gradiente Granada Grundig Harley Davidson Harman/Kardon Hewlett Packard HI-Q Hitachi Howard Computers HP Hughes Network Systems Humax Hush Hytek iBUYPOWER ITT Nokia Janeil Jensen JVC KEC Kenwood Kodak KTV LG Linksys Lloyd’s Loewe Logik Lumatron LXI M Electronic Magnasonic Magnavox 46 Code 0000, 0037, 0043, 0060, 0209, 0240 0037 0121, 0184 0032 0000, 0002, 0037, 0043, 0121, 0184, 0209, 0240, 0278, 0479, 1278, 1479 Pentax Philco Philips Pilot Pioneer Polk Audio Portland Profitronic Proscan Protec Pulsar Pulser Quartz 0042 0000, 0035, 0081, 0209, 0479 0000, 0035, 0048, 0045, 0081, 0162, 0209, 0616, 0618, 0739 0037 0042, 0067, 0081, 0162 0081 0278 0240 0060, 1060 0000 0039, 0240, 0278 0240 0035, 0047 RadioShack Scott Sears Sharp Soundmaster Stack 9 STS SV2000 SVA Sylvania Symphonic Systemax Tagar Systems Tandy Tatung Teac Technics Teknika Telecorder Tevion Thomas Code 0002, 0035, 0162, 1035 0000, 0035, 0037, 0047, 0048, 0162, 0240 0048, 0047, 0032, 0000, 0807 0000, 0039, 0240 0240 0037 0000, 0035, 0037, 0048, 0060, 0479 0037, 0240 0614, 0616 0000, 0032, 0033, 0035, 0047, 0067, 0636, 1232, 1972 0000 1972 0042 0000 0000 0000, 0035, 0043, 0081, 1781 0000, 0002, 0240 1972 1972 0000 0000, 0048, 0067, 0081 0000, 0067 0000, 0035, 0037, 0162 0000, 0035, 0037 0240 0479 0000, 0002 Brand Thomson Tisonic Tivo TMK TNIX Tocom Toshiba Code 0060 0278 0618, 0636, 0739, 1996 0000, 0240 0037 0240 0000, 0043, 0045, 0209, 0240, 0845, 1008, 1145, 1972, 1996 Tosonic Totevision Touch Trix Ultra Unitech Vector Vector Research Victor Video Concepts Videomagic Videosonic Viewsonic Villain Voodoo Wards 0278 0037, 0240 1972 0037 0045, 0278 0240 0045 0038, 0184 0067 0045 0037 0000, 0240 1972 0000 1972 0000, 0060, 0033, 0035, 0037, 0038, 0042, 0043, 0045, 0047, 0048, 0081, 0240, 0479 White Westinghouse World XR-1000 Yamaha Zenith 0000, 0209, 0278, 0479 0002, 0209, 0479 0000, 0035, 0240 0038 0000, 0033, 0037, 0039, 0209, 0278, 0479, 1479 ZT Group 1972 DBS/PVR Combination (V) ( Brand Hughes Network Systems PVR (V) ( Code 0739 0739 Brand Code Brand Code 1972 1972 1972 1972 0739 1972 1972 1972 Hughes Network Systems Humax Hush iBUYPOWER Linksys Media Center PC Microsoft Mind Niveus Media 0739 Northgate Panasonic Philips RCA ReplayTV Samsung Sonic Blue Sony Stack 9 Systemax 1972 0616 0618, 0739 0880 0614, 0616 0739 0614, 0616 0636, 1972 1972 1972 Tagar Systems Tivo Toshiba Touch Viewsonic Voodoo ZT Group 1972 0618, 0636, 0739 1008, 1972, 1996 1972 1972 1972 1972 0675, 1268 0522, 0815 0573, 0741, 0744, 0869, 1044, 1075 0741, 0869 0790 0490, 0651 0539 0582 0573, 0664 0672 1268 0571, 0627 0695 0558, 0623, 0867, 1164 0790 0490, 0534 0790, 1020 0533 0651, 1061 0627 1533 0591, 0741, 0869 1058 0741 0651, 0675 0503, 0539, 0646, 0675, 1268 0503, 0539, 0675 1533 0651 0695 0522 Minato Mintek Mitsubishi NAD NEC Onkyo Optimus Oritron Palsonic Panasonic 0752 0839 1521, 0521 0591, 0741 0785, 0869 0503, 0627, 0792 0571 0651 0672 0503, 0490, 0571, 0703, 1362, 1462, 1490, 1762, 2006, 2016, 2026, 1779 Samsung 0490, 0573, 0744, 0820, 0899, 1044, 1075 Sansui Sanyo Schwaiger Sharp Philips Sylvania Symphonic Teac Technics Tevion Theta Digital Thomson Toshiba Realistic Reoc Rio Rotel Saba Sampo 0503, 0539, 0646, 0675, 1267, 1354 0525, 0571, 0631 1020, 1061 0539 0675 0672 0522 0651 0741 0571 0522, 0571, 0790, 0822, 1022, 1132 0571 0752 0869 0623 0651 0752 Zeus 0695 0675, 0695 0752 0630, 0675, 0752, 1256 0533, 0839 0784 0573, 0869 0533, 0864, 1033, 1431, 1533 0675, 1268 0675, 1268 0571, 0790 0490, 0703 0651 0571 0522 0503, 0539, 0573, 0695, 1045, 1154 0591 0503, 0539 0839 0790 0522 0490, 0539, 0545 0503, 0591, 0741, 0869 0784 0741 0646, 0675 0490, 2006, 2016, 2026 0646 Pioneer RCA Samsung Sharp Sony 0631 0522 0490 0675 1033, 1431 Sylvania Zenith 0675 0741 1972 0503, 0539 0641 0695, 0899 0672 0790 0869 0533, 0672, 1020, 1056, 1061 1023 0790 0571 0695 0651 0695 0490 Funai GE Go Video 1020 0672 0869 0571 0503, 0539 0816, 0874, 1023, 1129 0784, 0869, 1172 0490, 0634 0672 0675 0675 0521 0591, 0675, 1268 0591 0503, 0539 1268 0651 Kawasaki Kenwood KLH Kloss Koss Lasonic Lecson LG LiteOn Loewe Magnasonic Magnavox DVD-Recorder (Y) ( Marantz McIntosh Medion Memorex Microsoft Pioneer Polaroid Polk Audio Presidian Proceed Proscan Qwestar Radionette RadioShack RCA Shinsonic Slim Art Sonic Blue Sony Universum Urban Concepts US Logic Venturer Xbox Yamaha Zenith ) LG Magnavox Panasonic Philips FAQs, etc. 1056 1129 0675 0741 1164 GoldStar Goodmans Gradiente Grundig Harman/Kardon Hitachi Hiteker Insignia Integra JMB JVC Remote Control Operation/Code List Arrgo Audiovox Blue Parade Blue Sky Brandt Broksonic California Audio Labs Celestial Centrex CineVision Clairtone Creative CyberHome Apex Digital CyberHome Funai Go Video JVC 0739 1972 1972 1972 1972 1972 1972 1972 ) 3D LAB Aiwa Akai Alba Alco Allegro Apex Digital Daewoo Denon Digitrex Disney Dual DVD2000 Emerson Enterprise Entivo ESA Firstline Brand Philips Samsung ) ABS Alienware CyberPower Dell DirecTV Gateway Hewlett Packard Howard Computers HP DVD ( ) Code 0739 47 Ratings List for Lock “V-chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. (p. 35) ■ U.S. MOVIE RATINGS (MPAA) NR G PG PG-13 R NC-17 X NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie has not been rated or rating does not apply. GENERAL AUDIENCES. All ages admitted. PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13. RESTRICTED. Under 17 requires accompanying parent or adult guardian. NO ONE 17 AND UNDER ADMITTED. ADULTS ONLY. ■ U.S. TV PROGRAMS RATINGS (U. S. TV) Age-based Group NR (Not Rated) Age-based Ratings TV-NR TV-Y Youth TV-Y7 TV-G TV-PG Guidance TV-14 TV-MA Possible Content Selections Viewable Blocked Viewable Blocked FV Blocked Viewable Blocked Viewable Blocked D,L,S,V (all selected) Any combination of D, L, S, V D,L,S,V (all selected) Any combination of D, L, S, V L,S,V (all selected) Any combination of L, S, V FV: Fantasy/Cartoon Violence. V: Violence S: Sex Description Not Rated. All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages 2-6. Directed to older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of 7. General audience. It contains little or no violence, no strong language, and little or no sexual dialogue or situations. Parental guidance suggested. The program may contain infrequent coarse language, limited violence, some suggestive sexual dialogue and situations. Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence. Mature audiences only. This program may contain mature themes, profane language, graphic violence, and explicit sexual content. L: Offensive Language D: Dialogue with sexual content. ■ CANADIAN ENGLISH RATINGS (C. E. L. R.) 14+ Exempt - Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. Programming intended for children under age 8. No offensive language, nudity or sexual content. Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content. General programming, suitable for all audiences. Parental Guidance suggested. Some material may not be suitable for children. Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. 18+ 18+ years old. Programming restricted to adults. Contains constant violence or scenes of extreme violence. E C C8+ G PG ■ CANADIAN FRENCH RATINGS (C. F. L. R.) E G 8 ans+ 13 ans+ 16 ans+ 18 ans+ • 48 Exempt - Exempt programming. General - Programming intended for audience of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately. 8+ General - Not recommended for young children. Programming intended for a broad audience but contains light or occasional violence. Adult supervision recommended. Programming may not be suitable for children under the age of 13 - Contains either a few violent scenes or one or more sufficiently violent scenes to affect them. Adult supervision strongly suggested. Programming may not be suitable for children under the age of 16 - Contains frequent scenes of violence or intense violence. Programming restricted to adults. Contains constant violence or scenes of extreme violence. Caution The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) as per FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of programming:” • Emergency Bulletins (Such as EAS messages, weather warnings and others) • Locally originated programming • News • Political • Public Service Announcements • Religious • Sports • Weather Maintenance First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, soak a soft, lint-free cloth in diluted neutral detergent (1 part detergent diluted by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry. Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected. • • Cabinet If the cabinet becomes dirty, wipe it with a soft, dry cloth. If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth. Do not allow any detergent to come into direct contact with the surface of the Plasma TV. If water droplets get inside the unit, operating problems may result. Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC. • • • Pedestal • • Cleaning Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of neutral detergent has been added and then wipe with a dry cloth. Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If using a chemically-treated cloth, follow the instructions supplied with the cloth.) Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.) Maintenance Ratings List for Lock FAQs, etc. 49 Technical Information Closed Caption (CC) • •• For viewing Closed Caption of digital broadcasting, set the aspect ratio to FULL. (If viewing with H-FILL, JUST, ZOOM or 4:3, characters will be cut off.) The Closed Caption is not displayed when you use HDMI connection. If analog connected equipment is used for displaying or recording, Closed Caption (CC) should be set On/Off on the connected equipment. The CC mode setting of the TV will not affect the analog input. If a digital program is being output in analog format, the CC data will also be output in analog format. If digital connected equipment is used for input, CC should be set On on either the connected equipment or the TV. If CC is set On on both the connected equipment and the TV, captions from each unit will overlap. Aspect Ratio Lets you choose the aspect depending on the format of the received signal and your preference. (p. 21) (e.g.: in case of 4:3 image) FULL JUST • • FULL JUST Enlarges the 4:3 image horizontally to the screen’s side edges. (Recommended for anamorphic picture) Stretches to justify the 4:3 image to the four corners of the screen. (Recommended for normal TV broadcast) • • H-FILL 4:3 H-FILL Side bar Enlarges the 4:3 image horizontally to the screen’s side edges. The side edges of the image are cut off. • ZOOM ZOOM Enlarges the 4:3 image to the entire screen. (Recommended for Letter Box) • 50 • Standard (Note that “Image retention” of the side bar may occur from displaying it for a long time.) • • • Note 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9): FULL, JUST, 4:3 or ZOOM 1080p / 1080i / 720p: FULL, H-FILL, JUST, 4:3 or ZOOM When the signal is 720p/1080i/1080p, the aspect mode automatically defaults to Full after turning off the TV, after changing input mode, or after changed signal resolution other than 720p/1080i/1080p. Zoom adjust Vertical image position and size can be adjusted in “ZOOM”. Select “Zoom adjust” on the “Picture” menu. (p. 28-29) V-position: Vertical position adjustment V-size: Vertical size adjustment To reset the aspect ratio (OK) Data format for SD Card browsing Photo: Data format: Max. number of files: Image resolution: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF** standards Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0) 9,999 160 x 120 to 10,000,000 * DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard ** EXIF (Exchangeable Image File Format) •• • Caution A JPEG image modified with a PC may not be displayed. Partly degraded files might be displayed at a reduced resolution. Note Folder structure viewed in PC Created automatically DCIM 100_PANA P1000001.JPG P1000002.JPG P1000003.JPG P1000004.JPG •• 3-digit folder number + 5-digit arbitrary characters 4-digit arbitrary characters + 4-digit file number Usable characters: 1-byte “a to z”, “A to Z”, “0 to 9,” and “_” • The folder and file names may be different depending on the digital camera used. For the suitable SD Memory Cards, please confirm the latest information on the following website. http://panasonic.co.jp/pavc/global/cs (This site is in English only) SD Card warning messages Message Is memory card in? No file Cannot read file Meaning • • •• The card is not inserted. The card has no data or this type of data is not supported. The file is broken or unreadable. The TV does not support the format. GalleryPlayer warning messages Cannot display image on SD card. •• • There is a problem with your TV decoder. If this message appears, please contact Panasonic Service Center for assistance. Refer to page 57, 59 (Limited Warranty), page 58 (Customer Services Directory) There is a problem with the data. Check the data inside the SD card. Cautions in handling SD Card: Do not remove the card while the unit is accessing data (this can damage card or unit). Do not touch the terminals on the back of the card. Do not subject the card to a high pressure or impact. Insert the card in the correct direction (otherwise, card may be damaged). Electrical interference, static electricity, or erroneous operation may damage the data or card. Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.) DIGITAL AUDIO OUT terminals You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier to the DIGITAL AUDIO OUT terminals. Caution •• • Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output. External speakers cannot be connected directly to PROG OUT terminals. When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC channel is selected, the output will be PCM. FAQs, etc. •• •• •• Technical Information Cannot display image due to incorrect ID data. 51 Technical Information (Continued) EZ SyncTM “HDAVI ControlTM” HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 32) This function may not work normally depending on the equipment condition. The equipment can be operated by other remote controls with this function on even if TV is in Standby mode. Image or sound may not be available for the first few seconds when the playback starts. Image or sound may not be available for the first few seconds when Input mode is switched. Volume function will be displayed when adjusting the volume of the equipment. If you connect the same kind of equipment at once (for example: one DIGA to HDMI 1 / another DIGA to HDMI 2), EZ SyncTM is available for the terminal with the smaller number. If you connect the equipment that has “HDAVI Control 2” function to the TV with HDMI cable, the sound from DIGITAL AUDIO OUT terminal can be output as multi channel surround. “HDAVI Control 2” is the newest standard (current as of February, 2007) for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment. •• •• •• • • HDMI connection HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV unit and the devices. HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected to the HDMI connector using an HDMI compliant (fully wired) cable. •• •• •• •• •• • • HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard. If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2). When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal. Audio settings can be made on the “HDMI 1 in” or “HDMI 2 in” menu screen. (p. 28) Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz (*1): The HDMI logo is displayed on an HDMI-compliant device. (*2): Enquire at your local digital equipment retailer shop. Caution Use with a PC is not assumed. All signals are reformatted before being displayed on the screen. If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”. These HDMI connectors are “type A”. These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection. A device having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S VIDEO”, or “VIDEO” to receive analog signals. The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i and 1080p. Match the output setting of the digital device. For details of the applicable HDMI signals, see p. 53. Side Bar Do not display a picture in 4:3 mode for an extended period, as this can cause “Image retention” to remain on either or both sides of the display field. To reduce the risk of such “Image retention”, change the brightness of the side bars. The side bar may flash (alternate black/white) depending on the picture. Using Cinema mode will reduce such flashing (See below). • Side Bar 4:3 Screen Display Picture mode •• •• 52 Vivid (default): Standard: Cinema: Custom (Photo): Provides enhanced picture contrast and sharpness for viewing in a well-lit room. Recommended for normal viewing conditions with subdued room lighting. For watching movies in a darkened room. It provides a soft, film-like picture. Customizes each item according to your taste. Photo is displayed in JPEG menu. Image retention Input signal that can be displayed * Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI 15.73 31.47 45.00 33.75 67.43 67.50 31.47 31.47 35.00 37.50 31.47 37.88 46.88 53.67 49.73 48.36 56.48 60.02 68.68 68.68 63.98 48.36 59.94 59.94 59.94 59.94 59.94 60.00 70.08 59.94 66.67 75.00 59.94 60.32 75.00 85.08 74.55 60.00 70.07 75.03 85.00 75.06 60.02 60.00 * * * * * * * * * * 525 (480) / 60i 525 (480) /60p 750 (720) /60p 1,125 (1,080) /60i 1,125 (1,080) /60p 1,125 (1,080) /60p 640 × 400 @70 640 × 480 @60 Macintosh13” (640 × 480) 640 × 480 @75 852 × 480 @60 800 × 600 @60 800 × 600 @75 800 × 600 @85 Macintosh16” (832 × 624) 1,024 × 768 @60 1,024 × 768 @70 1,024 × 768 @75 1,024 × 768 @85 Macintosh 21” (1,152 × 870) 1,280 × 1,024 @60 1,366 × 768 @60 •• PC * * * * * * * * * * * * * * * * Note Signals other than above may not be displayed properly. The above signals are reformatted for optimal viewing on your display. PC Input Terminals Connection Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) Some PC models cannot be connected to the set. There is no need to use an adapter for computers with IBM PC/AT compatible D-sub 15P terminal. The maximum resolution: 1,280 × 1,024 If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity. Signal Names for D-sub 15P Connector Pin No. 11 12 13 14 15 6 7 1 8 2 9 10 3 4 5 5 Pin No. 6 7 8 9 10 Signal Name GND (Ground) GND (Ground) GND (Ground) NC (not connected) GND (Ground) Pin No. 11 12 13 14 15 Signal Name NC (not connected) NC HD/SYNC VD NC FAQs, etc. Pin Layout for PC Input Terminal Signal Name R G B NC (not connected) GND (Ground) Technical Information • •• • • 53 FAQ Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For details (p. 58, 59) For additional assistance, please contact us via the website at: www.panasonic.com/contactinfo www.panasonic.ca White spots or shadow images (noise) • Check the position, direction, and connection of the aerial. Interference or frozen digital channels Pictures from external equipment are distorted when the unit is connected via HDMI SUB MENU (intermittent sound) • • Change the direction of antenna for digital channels. Check “Signal meter” (p. 37). If the signal is weak, check the antenna and consult your local dealer. • • • • - The remote control does not work •• • 54 Is the HDMI cable connected properly? (p. 42-43) Turn Off the TV unit and equipment, then turn them On again. Check an input signal from the equipment. (p. 53) Use equipment compliant with EIA/CEA-861/861B. Are the batteries installed correctly? (p. 6) Has the battery run down? To operate external equipment of other manufacturers, register the remote control codes. (p. 41) If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV). Problem “Press any key to return” moves on the screen Actions • The function to prevent “Image retention” is activated. (Not a faulty symptom) The screen saver is activated if the TV unit is not operated for a certain time in SD mode. “Image retention” (p. 5) Screen One spot remains dark • Chaotic image, noisy • Check nearby electrical products (car, motorcycle, fluorescent lamp). No image can be displayed • Check Picture menu (p. 28) Only spots are displayed instead of images •• •• •• • •• •• •• •• • • Black Box appears No sound is produced Sound Sound is unusual • Is the AC power cord plugged into the outlet? Is the TV unit turned On? Check Picture menu (p. 28) and volume. Are the remote control codes correct? (p. 45-47) Change settings of Closed Caption (CC). (p. 38) Are the speakers’ cables connected correctly? (p. 42) Is “Sound Mute” active? (p. 17) Is the volume set to the minimum? Is “Speaker output” set to “Off”? (p. 28) Change “SAP” settings. (p. 20) Check “HDMI 1 in” or “HDMI 2 in” settings. (p. 28) Set “SAP” setting to “Stereo” or “Mono.” Check the HDMI device connected to the unit. Set the audio setting of the HDMI device to “Linear PCM.” If digital sound connection has a problem, select analog sound connection. The sound is from built-in cooling fan (not a sign of faulty operation). FAQs, etc. Whirling sound is heard Check the channel settings. (p. 36) Check the antenna cables. Frequently Asked Questions Neither image nor sound is produced A pixel or luminescent spot can occasionally be missing in plasma displays. (Not a faulty symptom) 55 Specifications TH-42PZ700U AC 120 V, 60 Hz Power Source TH-58PZ700U Power Plasma Display Consumption panel Maximum 580 W 695 W 735 W Standby condition 0.2 W 0.2 W 0.2 W Drive method Aspect Ratio Visible screen size (W × H × Diagonal) AC type 16:9 42” class 50” class (41.6 inches measured diagonally) (49.9 inches measured diagonally) 36.2 ” × 20.4 ” × 41.6 ” 43.5 ” × 24.4 ” × 49.9 ” (922 mm × 518 mm × 1,057 mm) (1,106 mm × 622 mm × 1,269 mm) 2,073,600 (1,920 (W) × 1,080 (H)) [5,760 × 1,080 dots] (No. of pixels) Sound PC signals VGA, SVGA, XGA, WXGA, SXGA Horizontal scanning frequency 31 - 69 kHz Vertical scanning frequency 59 - 86 Hz Channel Capability (Digital/Analog) VHF/ UHF: 2 - 69, CATV: 1 - 135 Operating Conditions Temperature: 32 °F – 104 °F (0 °C – 40 °C) Humidity: 20 % – 80 % RH (non-condensing) VIDEO: RCA PIN Type × 1 1.0 V [p-p] (75 Ω) S-VIDEO: Mini DIN 4-pin Y: 1.0 V [p-p] (75 Ω) AUDIO L-R: RCA PIN Type × 2 0.5 V [rms] Y: 1.0 V [p-p] (including synchronization) PB, PR: ±0.35 V [p-p] AUDIO L-R: RCA PIN Type × 2 0.5 V [rms] TYPE A Connector × 2 This TV supports “HDAVI Control 2” function. AUDIO L-R: RCA PIN Type × 2 0.5 V [rms] D-SUB 15PIN: R,G,B / 0.7 V [p-p] (75 Ω) HD, VD / 1.0 - 5.0 V [p-p] (high impedance) AUDIO L-R: Stereo Mini Jack (Ф3.5 mm) × 1 SD CARD slot × 1 VIDEO: RCA PIN Type × 1 1.0 V [p-p] (75 Ω) AUDIO L-R: RCA PIN Type × 2 0.5 V [rms] PCM / Dolby Digital, Fiber Optic 3D Y/C FILTER CLOSED CAPTION V-Chip BBE VIVA 3D Photo viewer HDAVI Control 2 HDMI 1-2 • AUDIO IN PC Card slot AV PROG. OUT DIGITAL AUDIO OUT 42.5 ” × 29.8 ” × 14.6 ” (1,077 mm × 755 mm × 369 mm) TV Set only 42.5 ” × 27.2 ” × 5.5 ” 49.9 ” × 31.6 ” × 5.5 ” 57.3 ” × 36.2 ” × 5.7 ” (1,077 mm × 689 mm × 138 mm) (1,266 mm × 802 mm × 138 mm) (1,454 mm × 918 mm × 144 mm) Including pedestal 99.3 lb. (45 ) 123.5 lb. (56 ) 165.4 lb. (75 ) TV Set only 83.8 lb. (38 ) 105.9 lb. (48 ) 141.1 lb. (64 ) [TH-50PZ700U] 49.9 ” (1,266 mm) 27.2 ” (689 mm) 14.6 ” (369 mm) [TH-58PZ700U] 5.5 ” (138 mm) 31.6 ” (802 mm) 33.5 ” (850 mm) 5.5 ” (138 mm) 27.2 ” (689 mm) 29.8 ” (755 mm) 42.5 ” (1,077 mm) 49.9 ” × 33.5 ” × 14.6 ” 57.3 ” × 38.2 ” × 16.5 ” (1,266 mm × 850 mm × 369 mm) (1,454 mm × 970 mm × 418 mm) 57.3 ” (1,454 mm) 38.2 ” (970 mm) Dimensions ( W × H × D ) Mass Including pedestal [TH-42PZ700U] • C: 0.286 V [p-p] (75 Ω) 28.8 ” (730 mm) 14.6 ” (369 mm) 5.7 ” (144 mm) 36.2 ” (918mm) Connection Terminals COMPONENT VIDEO INPUT 1-2 FEATURES 58” class (58.0 inches measured diagonally) 50.5 ” × 28.4 ” × 58.0 ” (1,284 mm × 723 mm × 1,474 mm) Super Slim SP (2.5 W) × 2 Woofer (13 W) × 2 Audio Output INPUT 1-3 56 TH-50PZ700U 35.4 ” (898 mm) 16.5 ” (418 mm) Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. Limited Warranty (for U.S.A.) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF PANASONIC PUERTO RICO, INC. Ave. 65 de Infanteria, Km. 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 Panasonic Color Television Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. CATEGORIES PLASMA DISPLAY ALL PARTS EXCEPT GLASS PANEL OR CRT 1 (ONE) YEAR LABOR 1 (ONE) YEAR GLASS PANEL OR CRT GLASS PANEL - 2 (TWO) YEARS GLASS PANEL OR CRT LABOR 1 (ONE) YEAR SERVICE IN-HOME OR CARRY-IN During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty period, there will be no charge for parts. You must carry-in your product or arrange for in-home service during the Limited Warranty period. If nonrechargeable batteries are included, they are not warranted. This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of the original purchase date is required for Limited Warranty service. In-Home or Carry-in Service For In-Home or Carry-In Service in the United States call 1-888-VIEW-PTV(1-888-843-9788). For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910. Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage, nor does it cover markings or retained images on the picture tube resulting from viewing fixed images (including, among other things, letterbox pictures on standard 4:3 screen TV’s, or non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied Limited Warranty lasts, so the exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may also have others rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY. FAQs, etc. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Limited Warranty (for U.S.A.) Specifications In-Home service requires clear, complete and easy access to the product by the authorized servicer and does not include removal or re-installation of an installed product. It is possible that certain in-home repairs will not be completed in-home, but will require that the product, or parts of the product, be removed for shop diagnosis and/or repair and then returned. 57 Customer Services Directory (for U.S.A.) Customer Services Directory Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.com/contactinfo You may also contact us directly at: 1-888-VIEW-PTV (843-9788) Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. ■For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com or, send your request by E-mail to: [email protected] You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 8 pm, EST.) Panasonic Service and Technology Company 20421 84th Avenue South, Kent, WA 98032 (We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks) ■For hearing or speech impaired TTY users, TTY: 1-866-605-1277 Service in Puerto Rico Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Phone (787)750-4300, Fax (787)768-2910 58 Limited Warranty (for Canada) Panasonic Canada Inc. PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase. Plasma TV / Monitor In-home service One (1) year, parts (including Plasma Panel) and labour. LCD TV (26 in & over) In-home service One (1) year, parts (including LCD Panel) and labour. LCD TV (25 in & under) Carry-in service only One (1) year, parts (including LCD Panel) and labour. In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility. In-home service requires clear, complete and easy access to the product by the Authorized Servicentre and does not include removal or re-installation of an installed product. If removal is required to service the product, it will be at the discretion of the Servicentre and in no event will Panasonic Canada Inc. or the Servicentre be liable for any special, indirect or consequential damages. WARRANTY SERVICE For product operation and information assistance, please contact: Our Customer Care Centre: Telephone #: (905) 624-5505 1-800 #: 1-800-561-5505 Fax #: (905) 238-2360 Email link: “Customer support” on www.panasonic.ca FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca: Link: “Servicentres™ locator” under “Customer support” IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and preferably in the original carton. Include details of the defect claimed, and proof of date of original purchase. Limited Warranty (for Canada) Customer Services Directory (for U.S.A.) LIMITATIONS AND EXCLUSIONS This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this warranty. This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. FAQs, etc. 59 Customer’s Record The model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. Model Number Serial Number Anotación del cliente El modelo y el número de serie de este producto se encuentran en su panel posterior. Deberá anotarlos en el espacio provisto a continuación y guardar este manual, más el recibo de su compra, como prueba permanente de su adquisición, para que le sirva de ayuda al identificarlo en el caso de que le sea sustraído o lo pierda, y también para disponer de los servicios que le ofrece la garantía. Modelo Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus New Jersey 07094 U.S.A. Número de serie Panasonic Puerto Rico, Inc. Ave. 65 de Infanteria, Km. 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 © 2007 Panasonic Corporation of North America. All Rights Reserved. © 2007 Panasonic Corporation of North America. Todos los Derechos Reservados. Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 CANADA Printed in U.S.A. Impreso en EE.UU.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project