CEM Validation Readers Features that make a difference: • CEM has an advanced validation reader range. Cards can be added to the AC2000 system in seconds • Support for all major card technologies • The S610s and S610f validation readers are available for use with 125 kHz Proximity, iClass, Mifare, or DESFire smart cards • Backlit Monochrome Graphics LCD display allows meaningful messages to be displayed – informing the user of card transaction outcomes • Keypad configuration allows device configuration and set up at the reader itself. • InfoProx validation readers are mounted on their own desk top base station, with power supply. • Allows a wide range of card formats to be used on the CEM AC2000 system InfoProx Validation Reader CEM Validation readers are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 system. Part of the AC2000 personnel enrolment and card validation process, CEM validation readers quickly validate a personnel record with an ID card. Taking away the manual process of loading card numbers, CEM validation readers enable cards to be added to the AC2000 system in seconds. Validation readers are also used to validate cards on the AC2000 Vehicles and Visitors application. CEM has a range of validation readers that support all major card technologies, including HID 125 kHz Proximity, Mifare/DESFire (CSN) and HID iClass card technologies. How does the validation process work? Using the AC2000 Personnel / VIPPS (Visual Imaging & Pass Production System) application, a cardholder’s details, photograph and signature are entered into the AC2000 database. A feature of the AC2000 access control system is that each card MUST be validated before it can be issued. To assign an ID card to the personnel record, security administrators select the ‘Validate’ card option on the AC2000 software and swipe the card at the validation reader. The AC2000 workstation then reads the card number, which is subsequently stored on the AC2000 server. Additionally a CEM validation reader can be used in conjunction with the AC2000 workstation software. This requires a valid card swipe in addition to a login username and password, giving an extra layer of security. InfoProx Validation Reader The InfoProx validation reader is a serially connected reader and allows system www.cemsys.com S610f Validation Reader S610s Validation Reader operators to match an ID card to a cardholder’s AC2000 personnel details. The InfoProx validation reader is available in HID 125 kHz Proximity technology or 13.56 MHz Mifare/DESFire (CSN) smart card technology. Connection to the AC2000 enrolment workstation PC is via RS232 serial cable. Infoprox validation readers are supported on all AC2000 access control system ranges. S610s Validation Reader The S610s validation reader is designed to add cards to the AC2000 system range and allows system operators to match a card to a cardholder’s personnel details. The S610s Validation reader supports 125 HID kHz Proximity, Mifare/DESFire (CSN) and HID iClass cards, but is available with other options if an external third party reader is fitted. This is implemented using the S610s validation reader without a read head, but instead connected to the third party read head required. The S610s validation reader connects to the AC2000 enrolment workstation via RS232 serial cable. The S610s validation reader is supported on all the AC2000 access control systems. S610f Validation Reader The S610f fingerprint validation reader is used to enrol cardholders and capture their fingerprint templates onto the AC2000 system. The S610f validation reader enables both the validation of the card and the verification of a cardholders biometric fingerprint template. The S610f connects to the AC2000 workstation via LAN using Ethernet TCP/IP. The S610f validation reader is supported on all the AC2000 access control systems. It is possible to associate a fingerprint template with an existing cardholder record or to validate a new ‘Card & Biometric’ card type with fingerprint data at the same time. Specifications InfoProx Validation Reader S610s Validation Reader S610f Validation Reader 86 x 86 x 22mm (3.4” x 3.4” x 0.87”) 142 x 115 x 44mm (5.6 x 4.5 x 1.7”) 190 x 120 x 44mm Physical Size Weight 222.7g (7.9oz) with connectors 370g (13oz) with connectors 590g (13oz) with connectors Housing Flame retardant polycarbonate containing fully encapsulated electronics. Flame retardant polycarbonate containing fully encapsulated electronics Flame retardant polycarbonate containing fully encapsulated electronics Colour Dark Grey Dark and Light Grey Dark and Light Grey Power Voltage 9 – 15Vdc 9 – 14Vdc 9 – 14Vdc Current Consumption 140mA (passive), 250mA (peak) Consumption 200mA (passive), 320mA (peak) Consumption 260mA (passive), 470mA (peak) IP65 IP30 Environmental IP Rating Temperature -10º to 50ºC (14º to 122ºF) -20° to 50°C (-4° to 122°F) 0° to 55°C (32°F to 131°F) Humidity 95% non condensing Unlimited, also condensing Unlimited, also condensing LED Indicators Three high intensity LED indicators red, amber and green Three high intensity LED indicators red, amber and green Three high intensity LED indicators red, amber and green LCD Indicators Two line by 16 character supertwist LCD with backlight 32 x 122 dots Monochrome Graphics supertwist LCD with backlight 32 x 122 dots Monochrome Graphics supertwist LCD with backlight Keypad 12 character, standard layout, tactile response keypad. 12 character, standard layout, tactile or non-tactile response keypad. 12 character, standard layout, tactile or non-tactile response keypad. RS232 serial connection 10/100 Base-T TCP/IP using CAT5 Unshielded twisted pair cable Communication Interface To Work Station RS232 serial cable connects to PC Serial port. Connection RJ45 Ordering Information Product Code Product Code Description Description InfoProx Validation Reader S610f Validation Reader RDR/011/200 IPO 200 InfoProx 125 kHz Proximity Validation reader RDR/615/201 S610f Validation Reader 125 kHz Proximity RDR/615/205 S610f Validation Reader Mifare/DESFire (CSN) IPO 210 Mifare/DESFire (CSN) 13.56 MHz Validation reader RDR/615/208 S610f Validation Reader iClass RDR/011/210 S610s Validation Reader RDR/280/108 S610s Validation Reader iClass RDR/280/105 S610s Validation Reader Mifare/DESFire (CSN) RDR/280/109 S610s Validation Reader (no head for third party reader integration) Related Products AC2000 AC2000 Airport AC2000 Lite www.cemsys.com © 2014 Tyco Security Products. All Rights Reserved. CEM/B/022 Rev C Tyco and the product names listed above are marks and/or registered marks. Unauthorized use is strictly prohibited. Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your sales representative.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project