CITROEN C3 PICASSO (2009 - 2011) MKi + CK (EN_US)

CITROEN C3 PICASSO (2009 - 2011) MKi + CK (EN_US)
Installation manual:
Parrot
MKi + Parrot
C3 PICASSO
CK3100 range
C3 PICASSO
The brand
This
sheet name
is designed
CITROËN
to help
C3 PICASSO
you with
and
the
the
installation
CITROËN logo
of a are
Parrot
the product
propertyand
of CITROËN
is provided
AUTOMOBILES.
purely for information purposes. The installer is
solelydocument
This
responsible
is only
for valid
any installation
for the vehicle
carried
model
outC3
inPICASSO®
accordance
year
with
2009
thetoinstructions
2011, excluding
in this
all sheet
other and
models
for in
thethe
quality
same of
range
the and
installation.
excludingAll
rightsmodifications
later
reserved © made
Copyright
to the2011
vehicle
PARROT
by theSA,
manufacturer.
a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies
The
Parrot brand
Register
name
under
and logos
No. 394
are 149
the exclusive
496 Reproduction
property of
not
Parrot
permitted
SA.
without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Fitting time (estimated) / Main features
Disassembly
20min
YES
ACC wire
Kit installation
30min
NO
ISO
Refitting
20min
YES
UNIKA
Testing
15min
FRONT SPEAKER
TEL mode
Total
1h25min
ALL
MUSIC mode
Tools
- TORX screwdriver
Plastic trim removal tools
FACOM / BERNER
- Multimeter or Test lamp
- Hose clamp
- Electrical tape
FACOM Sleeve
DX-25 (n°4 spanners)
- Round file (or a knife)
Accessories required
CK range
MKi range
Kram ref.
Dealer ref.
CK range
86 165
9706AP
MKi range
84744
9706AT
“Quick Connect harness references available at
http://certified.parrot.com/faisceaux_US.php"
Photos not contractually binding
Updating
To get the most out of your hands-free kit we recommend that you update your
software regularly. The update procedure can be found at
www.parrot.com/usa/support/downloads
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Disassembly
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Disassembly 1 / 2
1
2
Insert the removal tools into the
slots on each side of the radio.
Unclip, pull and lift the radio
disconnecting the antenna
connector.
3
4
Using the plastic trim tools, unclip
the centre console storage
compartment.
Using the plastic trim tools,
unclip and remove the centre
console panel.
5
6
1
Remove the rubber caps on the
top of the glove box.
2
Remove screws 1 and 2 under the
covers.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Disassembly 2 / 2
7
8
Using the plastic trim tools, unclip
the top of the glove box. (Do not
remove it.)
Using the plastic trim tools, unclip
the clip located on the left side of
the dashboard.
9
10
Release the top of the fuse box
cover, then place it on the ground.
(Do not disconnect it.)
Remove the door seal on the
driver’s side.
11
Using the plastic trim tools,
unclip and disconnect the cabin
light.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Microphone passage
1
2
Using a guide, feed the cable
from the windscreen to the
cabin light.
3
Stick the bracket supplied to the cabin
light panel after cleaning the surface,
run the cable under the headliner
using a guide.
5
Pass the cable into the dashboard
on the left side.
Bring the cable out through the
rear hole. (You can see it through
the rain sensor cover.)
4
Run the cable along the
passenger side door pillar while
replacing the door seal.
6
Then run it under the steering wheel
towards the radio housing, attaching
it with wire ties.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Feeding the accessory cable
1
2
!
Pass the cable through the air
vent towards the radio housing.
Clip the glove box back on, making
sure that you DO NOT cut the
cable, leaving sufficient length.
3
Replace screws 1 and 2 and put
the rubber caps back on top.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Fitting the hands-free system 1 / 2
1
Connect the adaptor (86165/9706AP for the CK
or the 84744/9706AT for the Mki) to the
original connector. Connect all of the wires to
the blue box as shown in the diagram below.
Test before reinstalling then slide the assembly
into the bottom housing of the central console.
(Located under the storage compartment.)
ISO
adapter
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Fitting the hands-free system 2 / 2
2
3
Remove the card holder cover on
the centre console panel from the
back by unclipping it.
Make a notch on the top using a
knife or a file.
5
4
!
Feed the cable into the notch and
clip the card holder back in towards
the radio housing. (Make sure that
you DO NOT cut the cable.)
Then stick the support provided
onto the panel after cleaning the
surface, just above the air 12
conditioning adjustment hole.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Testing
Before refitting the system, switch the kit on using the
ignition (or by starting the car). By pushing the central knob
of the remote control, check:
1 - That the menu is displayed on the screen. (Language or
iPod.)
2 - That the system can be muted. (Click in the blue box.)
3 - That there is no sound coming from the speakers.
4 - That the sound from the voice menu is coming out of the
front speakers.
5 - Then turn off the ignition, check that the kit switches off
and that the "goodbye" message appears on the screen. (If
this fails, reverse the fuses on the kit's wiring harness.)
6 - Pair a telephone with the kit to make a call. (Check that
both the microphone and the kit are working.)
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
C3 PICASSO
Reassembly
Refit the system using the following procedure:
1 – Re-mount the central console cover.
2 - Replace the storage compartment.
3 – Re-install the radio reconnecting the adaptor and the antenna.
4 – Re-fit the fuse box cover by pushing hard.
5 – Re-fit the panel on the left-hand side of the dashboard.
6 - Clip the cabin light back in.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising