Bell System Full Product Catalogue
bellissimo door entry colour video telephone
2
bellfree ‘handsfree’ colour video apartment station
6
bellissimo audio telephone
10
801 door entry telephone
14
bellini panel range
18
door entry panels – SPA range (standard panel alluminium)
22
door entry panels – VRP & LCP range (vandal resistant & laser cut)
26
bellini systems
30
900 series audio door entry systems
34
VRK series vandal resistant door entry systems
38
belltone door entry telephone interface
42
DDA door entry systems (DDA - disability discrimination act)
46
bellissimo colour video door entry systems
52
digibell digital door entry systems
58
BSX & DAX isolating exchange door entry systems
62
combined door entry and proximity systems
68
bellcode coded access systems
74
cs109 combined door entry and coded access (secure)
78
cs106 combined door entry and coded access (standalone)
82
door entry components and accessories
86
bellcall emergency call system
89
1
2
The contemporary and stylistic bellissimo video telephone has a slim
and curvaceous profile. It is supplied in white to complement most
modern wall furnishings and is now the preferred choice of many of
the UK new build property developers.
The bellissimo model BS video telephone is manufactured in white
high-impact ABS plastic for high durability and has a 3.5” LCD colour
display providing a high definition quality picture.
With a fresh modern look the video telephone has soft silicone backlit
buttons and a ringer volume control. Privacy of speech is included
whereby only the called resident can converse with the caller.
These telephones can operate over long distances with standard CAT5
cables. They are wall mounted without the need for additional brackets
and connections to the telephone use removable connecting blocks.
3
Model BS
Privacy of speech is included
The telephone has three ‘soft-touch’ silicone
Private
whereby only the called resident
rubber push buttons that can be backlit and
To avoid disturbance the resident can push this button to mute
can converse with the caller.
each has a clear and precise function symbol;
the ringing tone and the button will illuminate in RED. The
When called the telephone
telephone will revert to normal operating mode after a selectable fixed
activates the display and enables
period (adjustable between 1 minute and 10 hours, or indefinitely).
speech
for
a
fixed
period
(adjustable 15 – 180 seconds).
4
View
Door
This button will flash in AMBER whilst the telephone is
A momentary press of this button will provide a timed
ringing. The telephone will normally display the picture from the
output to the lock release (adjustable at the panel controller, typically
panel camera unless the auto-picture option has been disabled and
3 seconds). The button will flash in GREEN to indicate that the door
in this instance the resident must press the flashing amber button or
may be released and will be lit permanently in GREEN if the door has
lift the handset for the display to appear.
been left in an open state (door contact required).
The model BS-DESK is available for table top mounting. The BS-DESK
is factory fitted on a sloped pedestal for ease of use and has a captive
cable with plug-in connector for the supplied telephone wall
Model BS-A
Audio phone
for extension
Telephone Dimensions:
H = 225mm, W = 180mm, D = 60mm
mounting socket.
The model BS video telephone can be connected to further model BS
video telephones for extension purposes. Alternatively, a model BS-A
audio telephones can be considered. In addition, a flashing beacon
(model BS-FB) and an extension sounder (model BS-RT) can also be
used as extensions.
Model BS-DESK
5
6
The bellfree colour video apartment station is a welcome addition to
our range of door entry systems. It operates with true ‘hands-free’
speech with outstanding clarity. Its sophisticated and universal appeal
makes it the ideal choice for new build apartment blocks and
refurbishments.
The bellfree system is compatible with the Bellissimo video telephone
(model BS) and the Bellissimo audio telephone (model BS-A). This
makes it a perfect solution for mixed housing developments and also
allows for added options for extension telephones.
The model BF apartment station is supplied for both surface and flush
fitting without additional brackets or connectors.
7
Sensitive Touch Pad for user operation
Surface or Flush fitting without additional
brackets or connectors
Model BF
The bellfree apartment station has a contemporary and slim profile to
• White satin-gloss finish to complement most wall furnishings.
Each standard BF packaged system provides all necessary components
complement modern apartments. It has true ‘hands-free’ speech
• Discreet contrast and call-tone volume controls
to install a complete video door entry system.
operation utilising a semi-custom Digital Processor with ‘Adaptive
• Supplied for both surface and flush fitting without the need for
Acoustic Echo & Ambient Noise Cancellation’.
additional boxes, brackets or connectors.
• It requires standard CAT5 cable and has removable connectors for
Some of the notable features of the bellfree apartment station
and system are;
• High quality colour video with a 3.5” TFT screen.
• True ‘hands-free’ speech.
• A sensitive Touch Pad for user operation with multi-coloured backlighting and universal graphic symbols.
8
ease of installation.
• Compatible with bellissimo video and audio telephones for
installation in mixed housing developments.
• Available with a range of vandal resistant stainless steel door
A standard multi-way BF system comprises of;
• model BF bellfree apartment stations
• model BSC4 telephone controller (one for every 4 units)
• model BFP stainless steel front door panel
• relevant BFD panel controller
• model CAMBS-C colour CCD day/night camera with infra-red lamps
panels with options for digital panels, DDA compliant panels,
• speech unit
proximity and coded access.
• model PS4 12v DC power supplies
Model BF4/VR
4 way system
Digital option
Proximity option
• model 203 surface lock release
Model BSC4 Controller
BFD72
• full wiring and installation manual
The model BSC4 interfaces up to 4 bellfree apartment stations on to
BFD-DIG - digital panel controller
- nine to seventy two button panel controller
the CAT5 distribution and provides line isolation. Each bellfree unit
Ordering information
has its own designated port with removable terminal blocks.
prior to installation to ascertain full cable specification and layout.
Order a model BF1 for a complete single station system. For multistation systems order a model BFn, where n is the number of stations.
Door Panel Controllers
Append /S for surface panels.
Each door panel on a system is connected to a door controller for
e.g. a model BF6 is a complete 6 station flush system
connection to the CAT5 distribution network and provides all inputs
a model BF6/S is a complete 6 station surface system
Please request a copy of the installation and operation manual
and outputs to the door and panel.
For tradesmen facility, add the code TRBF (a model TS2000-BST time
BFD1
- one button panel controller
clock is included).
BFD8
- two to eight panel controller
9
10
The bellissimo audio telephone complements the bellissimo video
range. It incorporates the extra functions and features of the video
system which is often requested by specifiers for audio systems.
The contemporary design has an extremely slim profile giving the
telephone a flush-effect when mounted on the wall. The telephone is
manufactured from high impact white ABS plastic with two ‘softtouch’ silicone rubber push-buttons that are selectively backlit and
clearly marked with symbols.
Two models are currently available;
model BS-A for audio extensions on the bellissimo video systems or
for connection to the bellcall digital systems.
model BS-LX available for connection to any of our standard 12v DC
door entry systems and can be considered as a direct replacement for
the model 500LX telephone previously supplied.
11
Model BS-LX
The slim-line white bellissimo audio telephones are manufactured
from high impact ABS plastic and have a flush effect profile when
mounted on the wall.
The white handset cord is coiled and has a plug-in connector at the
telephone base. No wires or parts are connected to the removable
cover so that that when it is removed there is no risk of damage.
12
Model BS-A
Standard features on these telephones are ‘privacy
(adjustable between 1 minute and 10 hours, or indefinitely).
Two models are currently available;
of speech’, ‘ringing tone muting’ with timing
The button is permanently lit in RED when the telephone ringing tone
Model BS-A
options, ‘adjustable ring volume’ and ‘door open’
is muted
This model is used for audio extensions on the bellissimo video
indication. Two ‘soft-touch’ silicone rubber push-
systems and also for connection to the digital systems when the extra
buttons are provided that are selectively backlit
Door
and clearly marked with symbols;
A momentary press of this button will release the lock
Private
function afforded by the telephone is specified.
mechanism. The button will be permanently lit in GREEN if the door
Model BS-LX
has been left in an open state (door contact required).
A full function telephone designed for connection to our standard 12v
To avoid disturbance from nuisance calls the resident may
DC door entry systems. This telephone is commonly used on the BSX
push this button to mute the ringing tone. The telephone
and DAX full line isolation systems and is a direct replacement for the
will revert to normal operating mode after a selectable fixed period
Telephone Dimensions: H = 235mm, W = 105mm, D = 25mm
model 500LX telephone previously supplied.
13
14
The model 801 is Bell Systems’ original door entry telephone. It has
been re-styled a number of times over the years and still maintains
its classic design. The 801 telephone continues to be the most
popular in the UK market owing to its exceptional reliability and
economical price.
The model 801 telephone operates from both12v AC or 12v DC and is
included in the standard model 900 and VRK audio door entry
systems as well as the CS and CSP series of combined keypad and
proximity door entry systems.
15
Model 801
The telephone is manufactured in white high-impact ABS plastic for
The model 801 telephone operates from both12v AC or 12v DC and is
Available models;
high durability and complements most wall furnishings. It incorporates
included in the standard model 900 and VRK audio door entry
• Model 801 (standard)
a 'lock release' push-button discreetly positioned on the base, and
systems. It is also included in the CS series of combined keypad and
• Model 801PS (with mute + privacy)
under the handset, to prevent inadvertent use. With its wide handset
proximity door entry systems.
• Model 801-DESK (desk mount)
the model 801 is especially recommended for the elderly.
Dimensions: H = 212mm, W = 85mm, D = 55mm
The Electronic Ringing Tone has a useful safety feature whereby the
tone is reduced when the handset is ‘off the hook’.
The telephone has two levels for the ringing tone. A HI or LO position
can be set within the telephone on installation or at future date.
16
Model 801
801S - Mute Switch.
this feature, the speech clarity of the system will be impaired if
A switch is included on the side of the telephone to allow the user to
telephones are left 'off the hook’; this is more likely on a larger system.
mute the call-tone and prevent disturbances from nuisance calls.
The model 801-DESK is available for
801P - Privacy of Speech.
table top mounting. The model
Any conversation between the visitor and the resident on the called
801-DESK is factory fitted on a
telephone is totally private. The telephone will remain 'live' for a set
sloped pedestal for ease of use and
period after being called and will then automatically close down the
has a captive cable with plug-in
speech connection. The 'privacy of speech' feature is highly
connector
recommended on systems that have in excess of 10 stations. Without
telephone wall mounting socket.
for
the
supplied
Model 801-DESK
17
18
Bell System is pleased to announce the launch of the new bellini
range of door entry surface mounting panels. These new stylish
panels can be considered as an elegant alternative to the traditional
SPA series of panels.
The bellini panels are designed for installations at low-rise
apartments, maisonettes and conversions making them an ideal
choice for the private building sector and property developers. The
range currently includes audio, audio combined with a keypad and
video panels.
All panels are manufactured from anodised aluminium in a
contemporary design and have black plastic trims with contrasting
chromed pushbuttons and speech grill. The front panels are hinged
from the back box for ease of installation and the hinges can easily be
changed from one side to the other to assist in tight locations
19
Model BLP2
Audio Panel
Model BLP106-3
Combined Panel
Model BLVP8
Video Panel
The front panels are hinged from the back box and the hinges can
easily be changed from one side to the other to assist their
installation in tight locations.
Optional nameplate illumination is available with the model BLP-LAMP
The bellini panels can be purchased independently or as part of a
lighting module.
packaged system. Three styles of panel are immediately available;
Panels do not included the speech unit and a model 61 speech unit
• Audio panel; 1, 2, 3, 4, 6, 8, 10 and 12 buttons
The bellini video panels include a protected CCD colour camera for
connection to the bellissimo video system.
should be ordered with each panel.
The bellini audio combined panels include an integral model C106
• Audio and video panel; 1, 2, 3, 4, 6 and 8 buttons
keypad for a residents’ coded access facility.
• Audio panel with integral keypad; 1, 2, 3, 4 and 6 buttons
20
Innovative hinged assembly
for ease of wiring
Bellini Panel Dimensions (mm) panels up to 3 buttons are single pushbuttons, panels above are double pushbuttons.
AUDIO
VIDEO
KEYPAD
CODE
Height
Width
Depth
CODE
Height
Width
Depth
CODE
Height
Width
Depth
BLP1
185
100
35
BLVP1
260
100
35
BLP106-1
285
100
35
BLP2
210
100
35
BLVP2
285
100
35
BLP106-2
310
100
35
BLP3
235
100
35
BLVP3
310
100
35
BLP106-3
335
100
35
BLP4
210
100
35
BLVP4
285
100
35
BLP106-4
310
100
35
BLP6
235
100
35
BLVP6
310
100
35
BLP106-6
335
100
35
BLVP8
335
100
35
BLP8
260
100
35
BLP10
285
100
35
BLP12
310
100
35
21
22
The SPA panels are supplied in the model 900 series door entry
systems and are a popular choice due to their high durability,
resistance to corrosion and low cost.
These panels offer a contemporary and attractive style. The panels up
to 10 buttons are manufactured from 3 mm brushed anodised
aluminum with an integral grill that protects the speech unit and
complements the surface back box. The grill has fixings on the rear to
firmly secure the speech unit.
As standard, the panels are supplied with a low-profile surfacemounting box moulded in black to complement the push-buttons.
Alternatively, the panels can be supplied with a flush fitting zintec
back box and vandal resistant bolts.
23
Model SPA1
Model SPA4
Model SPA6
Panels 1 to 10 buttons
from the front for replacement or amendment of the name or number
Tradesman’s button. A nameplate is positioned adjacent to the push-
They are manufactured from 3 mm brushed anodised aluminium with
on the paper insert (included with each button).
buttons. Optional backlighting can be achieved by fitting festoon lamp
units to the back-box; specify model 37 holder and model 36 bulb.
an integral grill that protects the speech unit and complements the
surface back box. The grill has fixings on the rear to firmly secure a
Optional backlighting can be achieved by fitting a model SPA-LAMP
model 61 speech unit.
lamp unit to each push-button.
A single push-button with integral nameplate is provided for each
Panels above 10 buttons
box by means of vandal resistant bolts (model 38) requiring a special
station including an optional Tradesman’s button. This push-button
These panels are manufactured from 4mm brushed anodised
tool (model 39) for their removal. These bolts and one special tool are
has a versatile design whereby pressure from any part of the
aluminium and are available in even numbers and for flush-fitting only.
supplied with each panel.
nameplate will initiate a call. The nameplate can easily be removed
A single push-button is provided for each station including an optional
The back box is manufactured from Zintec, a coated steel material
that prevents tarnishing and rusting. The panel is attached to the back
24
Model SPA12
SPA Door Entry Panel Dimensions SPA1 to SPA10 and SPA1F to SPA10F
Flush Panel (F)
Ordering information
Code
Order a model SPA n, where n is the number of push-buttons required
Panel (mm)
Surface Panel
Backbox (mm)
Backbox (mm)
H
W
H
W
D
H
W
D
SPA1
170
83
159
73
35
190
102
38
(Please include an extra push-button should a Tradesmen/Services
SPA2
230
83
219
73
35
248
100
43
button be required).
SPA3
270
83
259
73
35
288
100
43
SPA4
270
83
259
73
35
288
100
43
different style panel and are
All panels up to 10 buttons require a model 61 speech unit.
SPA5
370
83
359
73
35
388
100
43
flush fitting only.
Panels above 10 buttons require a model 51 speech unit.
SPA6
370
83
359
73
35
388
100
43
Sizes on application.
SPA7
370
83
359
73
35
388
100
43
Panel dimensions are
SPA8
470
83
459
73
35
488
100
43
approximate and may change
SPA9
470
83
459
73
35
488
100
43
SPA10
470
83
459
73
35
488
100
43
e.g. a 9 button unit would be a model SPA9.
Sizes above 10 buttons use a
without notice.
25
26
In vulnerable areas the entrance panel may be subject to vandalism.
This is common with local authority and public housing. Although it
is impossible to withstand extreme acts of vandalism, our VRP panels
are designed to resist all but the most determined of vandals. The LCP
panel offers even greater protection than the VRP panels and will
resist most attacks of vandalism.
The VRP panels are manufactured in our factory from 2.5mm 316
marine grade stainless steel. A stainless steel vandal resistant pushbutton is provided for each station and optionally for Trades. For each
push-button a number or letter can be engraved on the panel for
permanent identification. Many options are available for these panels
including keypads, proximity readers and cameras.
27
Model VRP1
Model VRP4
The VRP panels are manufactured from 2.5 mm 316 marine grade*
For each push-button a number or letter can be engraved on the
stainless steel or optionally in solid brass. They are supplied for flush
panel for permanent identification. The engraving of flat numbers is
mounting with a zintec back-box or optionally for surface fitting
included in the price but any further engraving, e.g. building names
with a stainless steel cowling. The panel is fixed to its back-box
or instructions will incurr a modest surcharge.
Model VRP9-S
with tamper proof bolts (a special ¼” hex bit is supplied).
Although we generally supply panels to fit standard back boxes, they
28
A single stainless steel vandal resistant push-button (or brass button
can be manufactured to custom dimensions; prices for this can be
Custom layouts can include;
for brass panel) is provided for each station and optionally for Trades.
obtained on application.
These buttons are individually attached by means of a nut on the rear
Since there are many variations with vandal panels an illustrative and
of the panel.
dimensioned drawing is provided for approval prior to manufacture.
•
•
•
•
•
Custom engraving with numbers and text
Trades facility
Cut out for CCD camera
Cut out for Proximity readers with stud fixings
Keypads for access control
Model VRP5
with extra engraving
Model LCP7
Model VRP6-WIN
*Despite the fact that the highest quality of 316 marine grade
just 0.3 mm rejecting implements that could be used to force the
the price but any further engraving can be
stainless steel is used in the manufacture of our panels they can
panel from its box. The bezel is securely welded to the back-box
included for a modest surcharge.
still be prone to tarnishing in some coastal locations or in areas
providing an extremely strong fixing to the wall. The removable
of industrial pollution. If in doubt about the suitability of these
plate is fixed to the bezel and back box with countersunk A2
Ordering information
panels in your area please contact us for advice.
stainless steel security bolts requiring the use of a specialist tool for
Order a model VRP n or LCP n, where n is the
their removal (supplied).
number of push-buttons required.
LCP Laser Cut Panels
e.g. a 4 button unit would be a model VRP4.
The LCP panel offers even greater protection than the VRP panels and
Vandal resistant push-buttons are included which are individually
(Please include an extra push-button should a
will resist most attacks of vandalism. The front-plate consists of an
attached by means of a back nut on the rear of the panel. For each
Tradesmen/Services button be required.)
overlapping bezel and a removable plate cut by a laser from the same
push-button a number or letter can be engraved on the panel for
For surface panels add –S to the order code e.g. VRP4-S
sheet of 2.5 mm 316 marine grade stainless steel. This leaves a gap of
permanent identification. The engraving of flat numbers is included in
All panels require a model 61 speech unit.
29
30
The bellini systems are designed for installations in low-rise
apartments, maisonettes and conversions making them an ideal
choice for the private building sector and property developers. The
range currently includes audio systems, audio and keypad combined
systems and video systems.
The surface mounted panels are manufactured from anodised
aluminium with a contemporary design and profile. The panels have
curved black plastic trims which contrast with the distinctive chromed
pushbuttons and speech grill. The front panels are hinged from the
back box and the hinges can easily be changed from one side to the
other to assist their installation in tight locations.
These new stylish systems can be considered as an elegant alternative
to the traditional 900 series systems. An optional tradesmen facility is
available on all but the largest system size in each version.
31
Model BL2
2 way audio system
Model BL106-3
3 way combined system
bellini audio systems
bellini combined audio and coded access systems
available and the model 210 (fail-secure) or the model 206 (fail-safe)
The bellini audio systems include the new contemporary surface
The bellini combined systems include the new contemporary surface
lock release is recommended.
mounted bellini panels. Each audio system includes a bellini audio
mounted bellini panels. A complementary chromed model C106
panel, the popular model 801 white wall-mounting telephones, a
keypad with LED indicators is included for coded access functions. The
Panel sizes include 1, 2, and 3 with single buttons and, 4 and 6 with
model 61 speech unit and a power supply. A fail-secure lock output is
C106 keypad may be programmed with up to 10 unique access codes
double buttons to keep panel dimensions to a minimum.
available and the model 210 lock release is recommended.
and has many programmed functions including lock duration, lock
Optional nameplate illumination is available with the model BLP-LAMP
delay and timed restrictions.
lighting module.
Panel sizes include 1, 2, and 3 with single buttons and, 4, 6, 8, 10, and
32
12 with double buttons to keep panel dimensions to a minimum.
Each combined system includes a bellini panel with keypad, the popular
Optional nameplate illumination is available with the model BLP-LAMP
model 801 white wall-mounting telephones, a model 61 speech unit
lighting module.
and a power supply. A fail-secure and a fail-safe lock output are
Model BLV2
2 way video system
Bellini colour video systems
silicone backlit buttons, a model 61 speech unit, all necessary
The bellini colour video systems include the new contemporary
controllers and a power supply. A fail-secure and a fail-safe lock
surface mounted bellini panels.
output are available and the model 210 (fail-secure) or the model 206
(fail-safe) lock release is recommended.
A protected ‘day-night’ colour CCD camera with infra-red lamps is
mounted in the panel for connection to the video telephone giving a
Panel sizes include 1, 2, and 3 with single buttons and, 4, 6 and 8 with
great colour picture of the visitor during the day and automatically
double buttons to keep panel dimensions to a minimum.
reverting to black and white at night to ensure a clear picture.
Optional nameplate illumination is available with the model BLP-LAMP
Each video system includes a bellini panel with camera, the popular
bellissimo video telephones with a 3.5" colour TFT screen and soft
lighting module.
Ordering information
Audio systems;
Order a model BL n, where n is the number of stations required
e.g. a 4 station audio system is a model BL4
For tradesmen entry add the code TRBL
Combined Audio and keypad systems;
Order a model BL106-n, where n is the number of stations required
e.g. a 4 station combined system is a model BL106-4
For tradesmen entry add the code TRBL
Video systems;
Order a model BLV n, where n is the number of stations required
e.g. a 4 station video system is a model BLV4
For tradesmen entry add the code TRBLV
bellini systems do not include a lock release
33
34
The 900 Series audio door entry systems are recognised for their high
quality and competitive pricing and are widely accepted as the
industry standard.
Each system provides all of the components necessary to install a
complete audio door entry system; including a surface lock release as
standard. The packaging of these complete systems allows for ease of
specifying, tendering, distribution and installation.
These systems are available from a one way (model 901) up to any size.
35
Model 901
1 way system
Model 902
2 way system
Each 900 series system comprises of;
The SPA panels supplied in the 900 kits are a popular choice due to
With its wide handset the model 801 is especially recommended for
• model 801 telephone, one for each station
their high durability, resistance to corrosion and low cost. These
the elderly.
• model SPA front door panel
panels are designed with an attractive and contemporary style and are
• model 61 speech unit (model 51above 10 ways)
available surface or flush up to 10 ways. The larger panels are of a
It incorporates a 'lock release' push-button discreetly positioned on
• model 203 surface lock release
more classic style and are available flush fitting only.
the base, and under the handset, to prevent inadvertent use.
• model 212 12v AC PSU (model 225 above 10 stations)
• full wiring and installation instructions
The Electronic Ringing Tone has a useful safety feature wherein the
The model 801 telephone is included as standard in each system.
The telephone is manufactured in white high-impact ABS plastic that
imparts high durability and complements most wall furnishings.
36
tone is reduced when the handset is ‘off the hook’.
Model 904
4 way system
Model 906
6 way system
Ordering Information
Order a model 901 for a complete single station system.
For multi-way systems order a model 900 + n, where n is the number
of stations, e.g. a model 914 is a complete 14 station system.
(For systems above 20 stations please append the code P for inclusion
of privacy telephones)
For tradesmen entry facility, simply add TR900 to any given system,
e.g. a six station system with trades facility is a model 906 +TR900
(A model TS2000-BST time clock is included).
37
38
The VRK Vandal Resistant Door Entry Systems have been devised for
buildings that are prone to external vandalism.
Each system provides all of the components necessary to install a
complete audio door entry system; including a surface lock release as
standard. The packaging of these complete systems allows for ease of
specifying, tendering, distribution and installation.
The system can have a range of options including; surface mounting
panels, extra engraving and a tradesmen entry facility. These systems
are available from a one way (model VRK1) up to any size.
39
Model VRK1
1 way system
Model VRK3+LOGO
3 way system
Each VRK series system comprises of;
the panel). A vandal resistant button is provided for each flat and
The telephone is manufactured in white high-impact ABS plastic
• model 801 telephone, one for each station
optionally one for Tradesmen.
which imparts high durability and complements most wall
• model VRP front door panel
furnishings. It incorporates a 'lock release' push-button discreetly
• model 61 speech unit
Each panel is custom engraved to client's specifications using the
positioned on the base, and under the handset, to prevent
• model 203 surface lock release
Panel Designer software, which creates a dimensioned drawing of the
inadvertent use. With its wide handset the model 801 is especially
• model 212 12v AC PSU (model 225 above 10 stations)
panel for customer approval prior to manufacture. The engraving of
recommended for the elderly.
• full wiring and installation instructions
flat numbers is included in the price of each system. Further engraving
(e.g. Block names) can be included for a modest surcharge.
The model VRP panels are manufactured from 2.5 mm 316 marine
40
The Electronic Ringing Tone has a useful safety feature wherein the
tone is reduced when the handset is ‘off the hook’.
grade* stainless steel. All panels are flush mounted and fixed to the
The model 801 telephones are included as standard for systems up to
back-box by tamper proof bolts (a special key is required to remove
20 stations and the model 801P with privacy function for larger systems.
Model VRK4 with extra engraving
+ Model TRVRK
4 way system with trade facility
Model VRK8-S
+ Model TRVRK
8 way surface system with trade facility
Ordering Information
*Despite the fact that the highest quality of 316 marine grade
Order a model VRK1 for a complete single station system.
stainless steel is used in the manufacture of our panels they can
For multi-way systems order a model VRK n, where n is the number
still be prone to tarnishing in some coastal locations or in areas
of stations
of industrial pollution. If in doubt about the suitability of these
e.g. a model VRK14 is a complete 14 station system.
panels in your area please contact us for advice.
For surface systems add –S to the order code e.g. VRK14-S
For tradesmen entry facility, simply add TRVRK to any given system
e.g. a six station system with trades facility is a model VRK6 + TRVRK
(A model TS2000-BST time clock is included).
41
42
The BT1 Telephone interface offers the convenience of operating
Operation
a door entry system from an existing BT style telephone without
The BT1 interface appears transparent to the phone line, even if the
interfering with its normal usage. Most domestic tone-dialling
BT1 is not powered. When a call is made from the entrance panel the
telephones are compatible with the BT1 including cordless DECT
telephone will ring for a maximum of 30 seconds. When the
telephones which are of great benefit to those people with
telephone is picked up the resident can converse with the visitor and
limited mobility.
operate the lock release by pressing ‘1’ on the telephone to allow
access. Should an external telephone call be received during this
The interface may also be connected onto many telephone
operation the resident has the ability to switch between both calls.
switchboards (PABX) via a dedicated trunk line input, but not an
extension connection.
BT1 Interface Unit
The interface is housed in a discreet ABS plastic enclosure which is
In addition to conversing with a caller at the front door panel the
designed for wall mounting in any indoor location, preferably next to
resident may allow them access by operating the lock release directly
the telephone line and a power point.
from their telephone.
Dimensions: H = 230mm, W = 190mm, D = 45mm
43
For connecting a one button
door entry panel to own home
telephone including cordless
DECT phones
Model BL1
Model BT901 belltone entry system
For a standard domestic application we offer a complete system that
includes all the necessary parts to complete an installation.
• model BT1 interface unit
• model SPA1 one button surface panel
• model 61 speech unit
• model 340C 12v DC power supply
• model 203 surface lock release
44
Model BT901
complete BT system
with SPA panel
Model BTBL1
complete BT system
with bellini panel
Model BTVRK1
complete BT system
with VRP panel
Model BTDDA1
complete BT system
with DDA panel
Model BTBL1 Belltone entry system
Model BTVRK1 belltone entry system
Model BTDDA1 belltone entry system
As an alternative for a domestic application we offer a complete bellini
For external areas that may be prone to vandalism we offer a
For an installation that requires attention to DDA regulations we offer
system that includes all the necessary parts.
complete VR system that includes all the necessary parts.
a complete system that includes all the necessary parts.
• model BT1 interface unit
• model BT1 interface unit
• model BT1 interface unit
• model BLP1 one button surface bellini panel
• model VRP1 one button flush panel (surface optional)
• model DDAP1/VR one button flush DDA panel (surface optional)
• model 61 speech unit
• model 61 speech unit
• model 61 speech unit
• model 340C 12v DC power supply
• model 340C 12v DC power supply
• model 340C 12v DC power supply
• model 203 surface lock release
• model 203 surface lock release
• model 203 surface lock release
45
46
These door entry panels and systems are designed to meet the
Each panel has one or more of the following;
requirements of the final part of the Disability Discrimination Act
(DDA). This Act requires service providers and landlords to consider
For the partially sighted;
making reasonable adjustments to the physical features of their
Each vandal resistant pushbutton has a ‘high-visibility’ halo ring. Options
premises to overcome physical barriers to access.
include permanently illuminated buttons, Braille characters and the
connection of a 12V DC tone for indication of lock release operation.
The DDA stipulates that a disabled person cannot be restricted from
gaining access to a site to obtain ‘goods or services’. This includes
For the deaf or ‘hard of hearing’;
people who use wheelchairs, blind and partially sighted people, deaf
Each panel includes two bright indicator lights; one permanently
people, people with arthritis, people with long-term illnesses and
engraved with ‘Speak Now’ when a call has been answered, and the
people with learning disabilities. This obviously has an impact on the
other engraved ‘Door Open’ for when the resident has triggered the
installation of new and existing Access Control Systems and these
lock release. The option of a Panel Inductive Loop is also available.
issues need to be considered at any Public building.
For wheelchair users;
The Bell DDA range has been designed to address the varying
Panels with an extended length can be used that allows operation from
interpretations and to assist compliance with door entry systems in a
both able-bodied and wheelchair users at different heights; the one station
cost effective manner.
panel includes two high visibility ‘halo’ buttons at differing heights.
The Bell DDA panels have been designed to address the varying
Resident or Employee facilities;
interpretations and compliance with the legislation with regards to
Added options include; a panel-mount proximity reader for resident or
door entry systems. All panels are manufactured in 2.5 mm 316 marine
employee access, keypad for resident access, a CCD camera for
grade stainless steel and can be flush or surface mounted.
connection to a video telephone and Tradesmen facilities.
47
Model
DDAP-EXT-1/VRS
surface panel
Model
DDAP-1/VRS
surface panel
Options;
Model
DDAP-3/VRS
surface panel
Illuminated push-buttons
The Bell standard budget DDA systems include audio and video
These vandal resistant stainless steel pushbuttons are offered as an
telephones, coded and proximity access.
Panel Inductive Loop
alternative to the standard high-visibility ‘halo’ buttons. They are
Many door entry specifications now require the inclusion of an
permanently lit with a bright green ring to aid partially sighted visitors.
inductive loop facility on the door panel for benefit of hearing aid
48
Model
DDAP-6/VRS+Proximity
surface panel
1. Standard DDA systems - model DDA/VR
These are general DDA door entry systems that include;
users. The model PANEL-IDL can be included on any of our vandal
Braille
• DDA panel with ‘halo’ buttons and indicator lights
resistant panels. The weather resistant module is permanently fixed to
In addition to the two styles of pushbutton some building specifiers
• integral speech unit
the rear of the panel with the front being engraved with the
request additional characters in Braille. Braille can be included on any
• 12v DC power supply
internationally recognised symbol.
of our vandal resistant style panels with permanent raised steel ‘pin-
• model 801 standard wall-mounting telephones
heads’. Any Braille character can be used including numbers and text.
• model 203 fail-secure lock release
Optional illuminated
vandal resistant button
Model DDA1/VR
1 way system
proximity reader
Model DDA3/VR
3 way system
Ordering information
Order using model DDA-n/VR where n is the number of stations for
2. ‘Wheelchair’ dual height door entry systems
- model DDA-EXT/VR
3. Combined DDA door entry and proximity systems
- model CSP- DDA/VR
systems with a flush panel.
These single station DDA systems have two call buttons on an
These are complete DDA door entry systems that include a proximity
Order using model DDA-n/VRs where n is the number of stations for
extended panel to enable operation from both able-bodied and
access system as a secondary form of access control for resident use.
systems with a surface panel.
wheelchair users. Each system includes;
For further information on the proximity system and for extra keyfob
e.g. DDA-1/VR is a complete 1 station flush system and DDA-4/VRS is
• DDA long panel with two ‘halo’ buttons and indicator lights
packs please refer to the ‘combined door entry & proximity systems’
a 4 station surface system
• integral speech unit
section of the catalogue.
For tradesmen facility, add the code TRDDA (A model TS200-BST time
• 12v DC power supply
clock is included).
• model 801 standard wall-mounting telephone
• model 203 fail-secure lock release
Ordering information: Order using model DDA-EXT-1/VR for a flush
system or DDA-EXT-1/VRS for a surface system.
49
Extended Model DDA-EXT-1/VR
1 way system
Video Model DDA-BS1/VR
1 way system
Proximity Model CSP-DDA-1/VR/ILL
1 way system
Order using model CSP-DDA-n/VR, where n is the number of stations
• integral speech unit
required
4. Combined ‘Wheelchair’ dual height DDA door
entry and proximity systems
- model CSP-DDA-EXT/VR
• 12v DC power supply
e.g. CSP-DDA-1/VR for a single station system or CSP-DDA-5/VR for
These are complete DDA dual height door entry systems that include
• model 801 standard wall-mounting telephones
five station system
a proximity access system as a secondary form of access control for
• model 203 fail-secure lock release
For tradesmen facility, add the code TRDDA (A model TS200-BST time
resident use. For further information on the proximity system and for
• starter fob pack (includes a ‘pack enable’ card, ‘fail-open’ card and
clock is included).
extra keyfob packs please refer to the ‘combined door entry &
Each system includes;
3 user keyfobs and shadow cards)
• full installation and programming instructions
50
Ordering information
• DDA door panel with Paxton compact proximity reader.
proximity systems’ section of the catalogue.
Proximity option with
illuminated button
Panel Inductive
Loop option with
Braille and ‘Halo’
button
Video option with
‘Halo’ button
Each system includes;
Ordering information
• 12v DC power supply
• DDA extended door panel with Paxton compact
Order using model CSP-DDA-EXT-1/VR for a flush system or
• model BS bellissimo standard wall-mounting video telephones
CSP-DDA-EXT-1S for a surface system
• panel and telephone controllers
proximity reader.
• integral speech unit
• model 203 fail-secure lock release
• 12v DC power supply
5. Video DDA door entry systems - model DDA-BS/VR
• model 801 standard wall-mounting telephone
These are general DDA video door entry systems. For further
Ordering information
• model 203 fail-secure lock release
information on the video system and for extra keyfob packs please
Order using model DDA-BSn/VR where n is the number of stations
• starter fob pack (includes a ‘pack enable’ card, ‘fail-open’ card and
refer to the ‘combined door entry & proximity systems’ section of the
e.g. DDA-BS1/VR is a complete 1 station video system and DDA-
catalogue. Each system includes;
BS4/VR is a 4 station system
• DDA panel with CCD camera and infra-red lamps
For tradesmen facility, add the code TRDDA (A model TS200-BST time
3 user keyfobs and shadow cards)
• full installation and programming instructions
and indicator lights
clock is included).
• integral speech unit
51
52
The bellissimo video door entry system is a versatile security product
System Features;
for controlling access to residential homes, blocks of flats and
• System generally connected with standard CAT5 cables
commercial premises. The video telephone allows the resident to view
• No need for separate co-axial cable
a caller at the entrance, speak with them and control their access.
• 3.5” flat screen high resolution LCD colour display
• Ringer mute function and volume control
The contemporary and stylistic bellissimo video telephone has a slim
• High resolution CCD colour day/night camera with infrared lamps
and curvaceous profile complementing most wall furnishings.
• Timed outputs for fail-safe and fail-secure lock release devices
• Optional Tradesmen facility
The ‘soft-touch’ silicone rubber push buttons are backlit and have clear
operating symbols. The telephone is wall-mounted directly without
additional mounting brackets or connectors.
• One videophone per call button and up to three extension
videophones (more with additional power supplies).
• The model BS bellissimo video telephone can be connected to a
conventional or digital panel
• Multiple entrances can be supported with the addition of one
panel and one door controller for each entrance.
53
Model BS1
1 way system
Model BS4
4 way system
Each standard BS packaged system provides all of the components
Ordering information
Video telephone controller model BSC4
necessary to install a complete video door entry system. A standard
Order a model BS1 for a complete single station system. For multi-
The model BSC4 interfaces up to 4 video telephones on to the CAT5
multiway BS system comprises of:
station systems order a model BS n, where n is the number of stations
distribution and provides line isolation. Each telephone has its own
• model BS bellissimo video telephones
e.g. a model BS8 is a complete 8 station system.
designated port with removable terminal blocks for ease of installation.
• model BSC4 telephone controller (one for every 4 telephones)
For tradesmen facility add the code TRBS
• model BSP front door panel and
(a model TS2000-BST time clock is included).
• relevant BSD panel controller
• model CAMBS-C CCD colour camera with infrared lamps
• model 61 speech unit
• model PS4 12v DC power supplies
• model 203 surface lock release
• full wiring and installation manual
54
Please request a copy of the installation and operation manual
prior to installation to ascertain full cable specification.
Model BS4/VR
4 way V/R system
Model BLV2
2 way bellini system
Door Panel Controllers
Model CAMBS-C camera unit
Each panel on a system is connected to a door controller for
The CAMBS is a solid state day/night colour CCD camera housed
connection to the CAT 5 distribution network and provides all inputs
in the BSP panel and protected by high- impact strength lexan
and outputs to the panel including lock output, exit, door monitor etc.;
window. The camera includes high intensity infra-red lamps for
BSD1 - one button panels
illumination of the caller at night.
BSD8 – two to eight button panels
BSD72 – nine to seventy two button panels
BSD-DIG – digital panels
55
brass options
bellini options
V/R options
Bellissimo video panels:
bellini options
proximity options
be manufactured for smaller systems if required. All panels are
Combined Video and Proximity (CSP-BSP series)
supplied for flush fitting but can optionally be supplied for surface
A panel-mount proximity reader is included on these panels for
Standard Aluminium (BSP)
mounting. These panels have the same specification as the standard
resident’ access. The panels are supplied for flush-fitting and with
These aluminium panels are supplied as standard in the BS1 – BS8
VRP panels
the option for surface mounting. The features of the compact
systems for surface fitting and are of the same specification as the SPA
series of audio panels. A flush-fitting back-box is available on request.
proximity reader are outlined in the ‘combined door entry and
Combined Video and Keypad (CS-BSP)
proximity’ section.
A stainless steel keypad is included on these panels for resident’
56
Vandal Resistant (BSP/VR)
access. The panels are supplied for flush-fitting and with the option
DDA compliant (DDA-BSP)
Manufactured in 2.5mm marine grade 316 stainless steel these panels
for surface mounting. The keypad is connected to the model 200
The DDA panels as outlined in ‘dda door entry systems’ can also be
are supplied as standard on panels with over 8 buttons but can also
controller as outlined in the ‘bellcode’ section.
used for video door entry systems.
BSC4 controller
combined brass options
BSD8 controller
digital V/R options
digital LCP options
Digital (BSP-DIG)
Concierge Station
For large block of apartments a digital panel should be considered.
The Concierge Station allows visitors to be pre-screened by on-site
These stainless steel panels give clear and concise user instructions
personnel for enhanced security.
from its bright LED. The LED dot matrix module offers excellent
visibility with large red characters. A transparent Lexan window gives
All Video panels can be independently purchased but complete
maximum protection. Stainless steel vandal resistant buttons are
packaged systems are available for most applications.
used throughout.
Please request a copy of the installation and operation manual prior
to installation to ascertain full cable specification on all video systems.
concierge station
57
58
The Digibell door entry telephone system is designed primarily for
• Vandal resistant stainless steel pushbuttons.
large apartment blocks in the private or public housing sector where
• Ring and lock reassurance tones.
reliability and serviceability are of prime importance.
• 4-digit coded entry facility for residents or tenants.
• Dedicated Porter/Reception call button.
The use of a digital entrance panel with keypad and display affords a
• Operates from a 12v DC power supply.
more compact solution when compared with a standard panel with
• Uses standard CAT5 cables.
one button per station which may be impractical due to its size.
• Compatible with standard model 801 telephones .
• Tradesmens facility with access code.
The Digibell system offers two levels of cable isolation;
• Full or Phone Isolation – between individual dwellings for
Optional Features of the Digibell;
buildings where vandalism from residents or tenants may
• Choice of Phone Isolation or Zone Isolation.
be expected.
• Time restricted Tradesmen facility (with model TS200-BST
• Zonal Isolation – between floors or zones for a more cost
effective system.
time clock).
• Battery Backup.
• Control equipment supplied in lockable steel cabinets for
Standard Features of the Digibell panel and system;
greater security.
• Capacity for over 400 apartments and 16 entrances per block.
• Compliance with Disability Discrimination Act (DDA).
• Large 4-digit LED display with informative messages e.g. CALL
• Extension tones and Flashing Beacons.
TALK OPEN.
• Alphanumeric apartment numbers e.g. 21A, A21.
• Firemans Switches.
• Vehicle and Pedestrian Gate Integration.
• High quality full duplex speech.
59
Model BS-A
Model 801
Model DBAP/DDA-S
Model DBAP/VR
Model
Privacy
Of Speech
Ring Tone Mute
Slide Switch
Button with indicator;
adjustable mute time
Digibell Panels Options
system. Telephones connected to a DBA-4I isolator have
All door panels are manufactured from marine grade stainless steel
Door Open
privacy of speech inherent in the design and models 801P and
and have vandal resistant pushbuttons. A 4-digit red LED dot-matrix
Indicator
801PS should not be used. All telephones connected to the
display is mounted behind a LEXAN window. Both flush and surface
same DBA-8Z isolator must be the same model. As standard a
fitting panels are available in the standard version and these are also
maximum of two telephones are allowed in each apartment.
suitable for factory fitting to one of our stainless steel posts. All panels
801
X
X
X
X
801S
X
3
X
X
801P
3
X
X
X
801PS
3
3
X
X
BS-LX
3
X
3
3
include security screw fixings.
The entrance panel should be sited in a semi-sheltered
location. All of its electronics are encapsulated in a single
module
providing
conditions.
60
Video option
Our standard telephones are suitable for use with the digibell
Telephone Options:
Telephone
Model DBAP/LCP
protection
against
environmental
Model DBAP/VR
Panel Model
Description
System and Panel Controllers
An example of the parts required for a typical system;
DBAP/VR
Flush stainless steel standard digital panel
Each digital controller requires it own controller and telephones are
One block of 32 flats with one entrance
DBAP/VRS
Surface stainless steel standard digital panel
connected to the system with a choice of two isolator controllers.
32 -
model 801 telephones
DBAP/DDA
DBAP/DDA-S
Flush stainless steel DDA digital panel
1
-
model DBAP/VR digital panel
with halo buttons
Part No.
Description
1
-
model BSD-DIG panel controller
Surface stainless steel DDA digital panel
BSD-DIG
with halo buttons
DBAP/LCP
Flush stainless steel digital ‘Laser Cut’ digital panel
DBA-4I
Digital door controller (1 required for each
4
-
model DBA-8Z isolator controllers
digital panel)
1
-
model PS4 12v DC power supply
4 way phone isolator (1 required every 4
1
-
model 203 lock release
apartments)
Proximity Fob readers can optionally be integrated into any of the
digital panels. We can either supply the panels with the reader or just
include the cut out and studs for retrofit.
DBA-8Z
8 way zone isolator (1 required every 8
Digital systems with bellissimo colour video telephones or bellfree
apartments)
colour apartment stations are also readily available. Please contact our
sales department for further information and for parts lists.
61
62
BSX (Bell System Exchange) and DAX Digital Isolating
Door Entry Systems
The BSX and DAX door entry systems are designed to overcome a
common problem experienced in local authority and public housing
where door entry systems are subject to vandalism from visitors and
tenants. These systems operate on the Line Isolation principle which
has two advantages over common-wired systems:
• Any malicious damage sustained to an individual telephone or
its associated cable will not affect the operation of the rest of
the system.
• The telephone conversation between the tenant and the caller is
totally private.
Each system includes Tradesmen/Service entry, a battery standby
facility and timed lock output (failsafe and failsecure) as standard. The
central exchange unit with diagnostic LED’s simplifies maintenance
and any part is easily exchanged with readily available spares.
63
BSX8 Cabinet
Model 801
Model LCP7
Model BS-LX
The BSX control unit
Telephones
The BSX control equipment is housed in a secure lockable steel IP55
• Optional access control e.g. Proximity controllers.
Any of our standard telephones may be used with the BSX exchange.
rated cabinet and can include the following:
• Adjustable lock, ring and talk times.
Each telephone connected to the BSX control will have ‘privacy of
• Isolating fused PCB removable connectors for the telephones.
• A model TS2000-BST 7 day quartz reserve time clock for trades access.
telephones must be individually cabled directly to the control unit. The
• Regulated PSU with isolation switch.
BSX8
8 station single door
standard model 801 telephones can be used for economy but the
• A control PCB for each entrance providing timed output for door
BSX8-2
8 station two door
model BS-LX is highly recommended due to its added functions.
releases (failsafe and failsecure), output tones and inputs for
BSX16
16 station single door
trades buttons.
BSX16-2 16 station two door
• A 12V 7A/H battery when battery standby is specified.
64
speech’ due to the line isolation. To achieve full 'line-isolation', the
Four BSX Control units are available;
Telephones must be rung and answered before the lock can be
released. A stuck unlocked button is ignored.
Front door panels
Tradesmen facility
Electric lock release
The model VRP and model LCP panels are recommended for use with
The facility for a time-restricted entry for tradesmen is included on the
The BSX control provides an outputs for both failsecure and failsafe
the BSX system due to their resistance to vandalism.
BSX control. The operation of the Trades push-button will only trigger
lock releases (including magnetic locks).
the door release when the time clock within the BSX control is set to
Reassurance tone
an ON period.
A reassurance to the visitor that a call has been made and to indicate
when the lock release has been operated.
65
Model DPX-VR
DAX32 Cabinet
Model DPX-LED
Model 801
Model BS-LX
The DAX digital system operates on the Line Isolation principle which
System features;
Model DAX exchange control
has two advantages over common-wired systems;
• up to 256 flats
All the control equipment is installed in one or more IP55 rated secure
• up to 4 entrances
lockable steel cabinets. Each control contains one or more of the
• large LED dot matrix display
following components;
• 4 digit alpha-numeric flat numbers
• All necessary control equipment
• 4 digit coded access facility
• 8 way Relay PCB’s for connection of telephones
• trades facility
• Model TS2000-BST 7 day quartz reserve Time Clock for trades access
• porter facility (optional)
• 12v DC 5A power supply with standby facility
• standby battery backup
• optional 12v 7A/H lead-acid battery
• outputs for fail safe and fail secure releases
The control has LED diagnostics and Test modes for commissioning
• Any malicious damage sustained to an individual telephone or its
associated cable will not affect the operation of the rest of the system.
• The telephone conversation between the tenant and the caller is
totally private.
and maintenance purposes
66
Model DPX-LED Front Door Panel
The LED dot matrix display module offers excellent visibility with large
Telephones
The front-plate consists of an overlapping bezel and a removable plate
red characters. A transparent LEXAN window gives maximum
Any of our standard telephones may be used with the DAX
cut by a laser from the same sheet of 2.5 mm 316 marine grade
protection from vandals. Stainless steel vandal resistant push-buttons
exchange. Each telephone connected to the DAX control will have
stainless steel. This leaves a gap of just 0.35 mm rejecting implements
are used throughout. Clear operating instructions are engraved on the
‘privacy of speech’ due to the line isolation. To achieve full isolation,
that could be used to force the panel from its box.
panel in black.
each telephone station must be individually and directly cabled to
the DAX control. However, the system is able to operate in partial
The bezel is securely welded to a back-box of 1.5 mm 316 grade
For economy, the standard Model DPX-VR can also be considered.
stainless steel. This provides an extremely strong fixing to the wall. The
removable plate is fixed to the bezel and back box with countersunk
isolation mode commonly referred as ‘zone isolation’ for more
economic cable installation.
Options can include cutouts for a Video camera and Proximity.
A2 stainless steel security bolts requiring the use of a specialist tool for
The standard model 801 telephones can be used for economy but the
their removal (supplied).
model BS-LX is highly recommended due to its added functions.
67
68
It is common for a door entry telephone system to be combined with
Paxton Compact panel Mount Reader
a proximity access system to allow easy access by residents, tenants
This compact panel-mount reader is manufactured by Paxton Access
or staff.
for exclusive use in Bell System door entry systems. It is mounted on
the rear of the panel by four secure threaded studs and nuts and
Distributors have sourced products from two manufacturers but now
protected on the front by a Lexan window. The proximity compact
two Great British manufacturers have combined their leading
reader contains all the electronics inside the reader, from which come
products to offer an outstanding integrated access control system.
three cable pairs connecting to the power, electric release and,
The inclusion of an exclusive Paxton compact standalone reader on
optionally, an exit button. The lock output is fail-secure by default
door entry panel allows authorised personnel free entry to the
with a timed lock output set at 5 seconds. Alternatively, the fail-open
building by means of a keyfob whilst visitors’ access can be controlled
card (included in the starter keyfob pack) can be used to change the
by the Bell System door entry telephone.
lock output to operate a fail-safe lock
The proximity system is the ideal access control solution in situations
where no central programming or reporting is required. Validating
and voiding of users is achieved with a unique shadow card system,
and all system programming is performed with the easy to use
function cards. All packaged systems include a starter pack of keyfobs
and additional keyfobs can be purchased as required.
69
Starter Keyfob Pack
Starter Keyfob Pack
Keyfob Packs
Door open time card: Sets the amount of time the lock is energized for.
Each CSP system includes a starter keyfob pack consisting of;
A ‘shadow card' system is used for ease of management and the
Fail open release card: Presenting this card reverses the operation of
• One Enrolment card
keyfobs are supplied with a wallet for storing the shadow cards.
the lock output to make it suitable for operating a fail open release.
Presenting this card again reverts operation to the default.
• Three Proximity user keyfobs
• Three user shadows
When installing the system the Starter keyfob pack is added by
Silent operation card: Disable the sounder in the reader. Presenting
• One fail-open release card
presenting the Enrolment card from that pack. Subsequent packs are
this card again enable the sounder.
Additional keyfob packs can be purchased as required.
added by presenting the original Enrolment card followed by the
The full Function Card Pack can be considered for further features
Enrolment card from the new pack. Further configuration is done
Each keyfob is packaged with a corresponding shadow card. Once
or functions.
using the other cards in the pack
installation of the system is complete all user cards are valid and ready
to be issued. Keyfobs are available in packs of 10, 25, 50 or 100 users.
Proximity Function Card Pack – model 820-000.
70
Model CSP1
1 way system
Model CSP6/VRS
6 way system
The starter keyfob pack included in the system is sufficient to get the
CSP Standard Front Door Panels (7 buttons maximum)
CSP Vandal Resistant Front Door Panels (any size)
system started and in many installations no further features or functions
These panels are similar to the standard audio SPA style panels and are
The vandal resistant panels are manufactured from 2.5 mm 316
are required. However, the full function card pack allows the more
manufactured from 3 mm anodised aluminium with an integral grill
marine grade stainless steel. Panels are flush mounted and fixed to the
advanced features of the proximity system to be utilised including
protecting the speech unit. The compact proximity reader is protected
back-box by tamper proof bolts (a special key is required to remove
zoning with three differing coloured fobs and timing options.
by a Lexan window.
the panel). Optionally, the panels can be supplied with stainless steel
housing for surface mounting.
As standard, the panels are supplied with a low-profile surface
mounting box moulded in black. Alternatively, the panels can be
A single model IP68 stainless steel vandal resistant button is provided
supplied with a flush fitting zintec back-box and vandal resistant
for each flat and the option of one for Tradesmen. The engraving of
bolts. The largest available panel has 7 buttons and thereafter the
flat numbers is included in the price of each system. Further engraving
vandal resistant style should be used.
(e.g. Block names) can be included for a modest surcharge.
71
Model CSPP1
Model CSPP1/VRS
Model CSPP2/VRS
CSP Series proximity systems
These systems are conveniently packaged with all necessary components
to complete an installation including a starter pack of keyfobs.
• starter keyfob pack (includes an ‘enrolment’ card, a ‘fail-open’ card
and 3 user keyfobs and shadow cards)
• full installation and programming instructions
A standard CSP series system comprises of;
Combined video systems
• model 801 standard wall telephones
The convenient range of packaged systems can also include video
• model CSP aluminium door panel with compact proximity reader.
telephones. These systems include;
(Panels above 7 buttons are vandal resistant).
• 12v DC power supply
• model 203 surface lock release
72
• model 61 speech unit
• relevant video controllers
• 12v DC power supply
• model 203 surface lock release
Additional packs of keyfobs can be purchased to the required number.
• model 61 speech unit
Model CSPP4
• model BS bellissimo video telephones
• model CSP stainless steel vandal resistant style panel with colour
CCD day/night camera
• compact proximity reader
• starter keyfob pack
(includes an ‘enrolment’ card, a ‘fail-open’ card and 3 user keyfobs
with their shadow cards)
• full installation and programming instructions
Bellissimo
Video Telephone
V/R option
Model PROX-REAR Rear door Paxton proximity system
Model PAX-2-S reader
in surface V/R housing
Video option
Ordering information:
Model PAX-2 reader in
flush V/R housing
Video CSP systems
This kit includes all the basic components to achieve proximity access at a
Order using CSP-BSn/VR, where n is the number of stations
single door. This system is ideal for giving proximity access at the rear door
Standard CSP systems
when a complete model CSP system has been installed at the front entrance.
Order using CSP-n, where n is the number of stations
For surface use /VRS
This PROX-REAR system comprises of;
e.g. CSP-1 for a one station
For tradesmen facility us ethe code TRCP
e.g. CSP-BS1/VR for a one station
CSP-2 for two stations
• stainless steel panel with compact proximity reader and flush backbox (surface option available)
CSP-BS10/VR for two stations
(A model TS2000-BST time clock is included)
Vandal Resistant CSP systems
• 12v DC power supply
Order using CSP-n/VR, where n is the number of stations
Additional keyfobs;
• model 203 surface lock release
e.g. CSP-1/VR for a one station
No.of fobs in Pack = Code
• starter keyfob pack (includes an ‘enrolment’ card, a ‘fail-open’ card
For surface use /VRS
CSP-10/VR for ten stations
10 = 820-010G 25 = 820-025G 50 = 820-050G 100 = 820-100G
and 3 user keyfobs with their shadow cards)
• full installation and programming instructions
73
74
These bellcode access control systems are high quality versatile security
The model 200 Controller
product controlling access through doors by means of a digital keypad
The model 200 controller is housed in a stylish and discrete plastic
and electric lock release. The use of a separate controller ensures that
box. Security is further enhanced by placing the controller in a secured
no amount of tampering with the keypad will undermine the system’s
area. This arrangement provides a superior level of security when
security. For convenience the system is programmed from the keypad
compared to many combined keypad/controllers in the market.
and offers a wide range of useful functions.
Programming is easily achieved by entering a ‘security code’ and then
a sequence of simple codes at the keypad.
The secure model 200 controller may be programmed with up to ten
The main features are;
unique codes. If a valid code is entered on the keypad, the lock release
• Ten access codes (programmable from 1 to 8 digits).
will operate for a preset duration. The controller may be programmed
• Timed lock outputs for fail-secure and fail-safe lock releases.
to operate an audible alarm under various circumstances and disable,
• All functions are stored in a protected non-volatile 'EEPROM'
the lock output if necessary. The access codes and other programmable
memory. The access codes and other programmable parameters
parameters are retained indefinitely without power.
are retained indefinitely without power.
• Provisions for a ‘push to exit’ egress switch input.
The keypads have a green and red LED to indicate the system status to
• Space for an extra model 201 control PCB for second door and keypad
the user; the green indicates that the lock release is operating, whilst
• Additional programming functions include;
the red LED indicates an invalid entry or alarm condition.
Lock duration
(1 - 99 seconds)
Lock delay time
(0 - 99 seconds)
Alarm duration
(1 - 99 seconds)
Key limit
(0 - 99 keystrokes)
Code entry time limit
(0 - 99 seconds.)
Duress access mode
Dimensions: H = 230mm, W = 185mm, D = 45mm
75
Model 217 keypad
Model 216 stainless steel keypad
Model 216F flush stainless steel keypad
The bellcode 218 keypad is a slim-line touch sensitive keypad with
The keypad and push-buttons are manufactured in a high grade 316
A flush mounting keypad supplied with a metal flush back box. It is of
no moving parts (uses Piezo technology) designed for operation in
stainless steel and is ideal for sheltered external locations. The back-
identical design to the standard 216 keypad but has larger overall
all environments. It is manufactured in aluminium and anodised for
box is a robust alloy casting which is aluchromed and then powder
dimensions to ensure an adequate overlap.
complete weather protection. The electronics are potted making
coated for maximum protection.
the keypad waterproof and rated at IP68. Each push-button is
76
Model 216 keypad
Model 218 keypad
Model 218 bellcode keypad
Dimensions (mm):
clearly defined and a re-assurance tone is available to indicate a
The keypad is fixed to the box with Allen type security bolts. It is
Keypad
positive key-stroke. A green and a red LED are included to indicate
recommended for most sheltered environments. A green and a red
Flush box H = 117mm, W = 71mm, D = 25mm
H = 141mm, W = 95mm
operational status.
LED are included to indicate operational status.
Dimensions: H =103mm, W = 66mm, D = 20mm
Dimensions: H = 135mm, W = 90mm, D = 30mm
Model CK200 one door system
Model CK109 one door system
Model CK110 one door system
Model 217 slim-line keypad
Model CK200 coded access system
Model CK110 coded access system
This keypad is manufactured in similar fashion to the 216 but has two
• model 218
• model 217
columns of 6 keys (instead of 3x4) in order to produce a slimmer
• model 200
boxed controller
product suitable for door frames.
• model 340C
12v DC power supply
• model 200
boxed controller
standard rim lock release
• model 340C
12v DC power supply
• model 203
standard rim lock release
• model 203
Touch sensitive slim-line keypad
Dimensions: H = 132mm, W = 40mm, D = 27mm
Complete boxed systems, ideal for the both distributor and installer;
stainless steel slim-line
surface keypad
Model CK109 coded access system
• model 216
stainless steel surface keypad
• model 200
boxed controller
• model 340C
12v DC power supply
• model 203
standard rim lock release
77
78
A frequent requirement for a door entry system is the facility of a
coded access system. This allows residents, tenants or staff the means
to enter to the building by the operation of an integral keypad
at the main entrance panel.
The CS109 are combined door entry and coded access systems utilising
a panel mounted stainless steel keypad. The system has an independent,
secure controller and therefore can be considered when a high level of
security is necessary. It is available from a single station system up to any
number of telephone stations. However, the keypad feature is available
on any of our door entry systems and can be included with vandal
resistant VRP or LCP style panels, video and brass panels.
The CP109 keypad may be programmed with up to ten unique access
codes. If a valid code is entered on the keypad, the lock release will
operate for a preset duration. The keypad has one green LED and one
red LED to indicate the system status to the user: the green LED
indicates that the lock release is operating, whilst the red LED
indicates an invalid entry. There are ten user access codes and a wide
range of programmable functions.
79
Model CS109-1
1 way system
Model CS109-4
4 way system
Model 200 controller
Model CP109 Front door panels
A CS109 series systems comprise of
This controls access to one door by means of the stainless steel keypad
The standard panel is attractively designed and manufactured in 3
• model 801 wall mounting telephones
on the front door panel and is housed in an attractive and discreet
mm brushed anodised aluminium. It has an integral robust stainless
• model CP109 aluminium door panel with stainless steel keypad
plastic box. The programming is easily achieved by entering a security
steel keypad of similar design to the model 216 keypad and should be
• model 51 speech unit
code and a sequence of simple codes at the keypad. The controller has
sited in a sheltered location. The panel has a push-button for each
• model 200 independent boxed controller
ten codes available each of which can be 1 to 8 digits. Please refer to
telephone station and can be supplied for surface or flush-mounting
• model 340C power supply
the Coded Access Control section for a list of features and
up to 7 buttons and in vandal resistant up to any size. These panels
• model 203 surface lock release
programmable functions.
can also be manufactured in stainless steel or and include a camera
• full installation and programming instructions
for connection to the bellissimo video entry systems.
80
V/R option
Brass option
CS 109 Series Combined Coded Access & Door Entry Panel Dimensions
CP109-1 to CP109-7 and CP109-1F to CP109-7F
Ordering information
Flush Panel (F)
Order using model CS109-n, where n is the number of stations required
e.g. CS109-1 for a single station system or CS109-12 for a
Panel (mm)
H
W
H
W
D
H
W
D
CP109-1
270
83
259
73
35
288
100
43
CP109-2
370
83
359
73
35
388
100
43
CP109-3
370
83
359
73
35
388
100
43
CP109-4
370
83
359
73
35
388
100
43
CP109-5
470
83
459
73
35
488
100
43
CP109-6
470
83
459
73
35
488
100
43
CP109-7
470
83
459
73
35
488
100
43
12 station system.
For tradesmen facility append the code TRCS.
(A model TS2000 time clock is included).
Surface Panel
Panel
Backbox (mm)
Backbox (mm)
Sizes above 7 buttons are vandal resistant.
Panel dimensions are approximate and may change without notice.
81
82
The CS106 are combined door entry and coded access systems
The C106 standalone keypad may be programmed with up to ten
utilising an economic C106 standalone keypad module. These can be
access codes of between 1 to 8 digits. The extra codes are provided
considered where a low level of security is deemed to be adequate.
for multi-user application or for timed restricted access (additional
Should a high level of security be necessary then the CS109 combined
time clock required). The keypad has both fail secure and fail safe lock
systems should be used.
outputs and an exit facility from a remote push-button. Other
programmable features include lock duration and lock delay time.
The C106 keypad may be programmed with up to ten unique access
The access and user programs are stored in a protected non-volatile
codes. If a valid code is entered on the keypad, the lock release will
EEPROM memory and all programmed features are retained
operate for a preset duration. The keypad has one green LED and one
indefinitely without power.
red LED to indicate the system status to the user: the green LED
indicates that the lock release is operating, whilst the red LED
indicates an invalid entry. There are ten user access codes and a wide
range of programmable functions.
Two panels are available the CP106 (SPA style) with a maximum of
7 buttons and the BL106 (bellini style) with a maximum of 6 buttons.
For larger systems the CS109 combined systems should be used.
83
Model CS106-1
1 way system
Model CS106-4
4 way system
Model CP106 front door panels
Standard combined system – CS106 series
These panels are similar to the SPA style panels and are manufactured
Each systems comprise of;
from 3 mm anodised aluminium. They should be sited in a position
that is protected from adverse weather conditions. They are available
for either surface or flush fitting.The C106 keypad module is designed
to complement the panel, push-button and surface box in a
contemporary style. The module has outputs for both failsafe and
failsecure lock releases and connection for an exit button.
The largest available panel is of 7 buttons and the CS109 series should be
considered on any larger system.
84
• model 801 wall mounting telephones
CS106 Standalone Door Entry & Coded Access Combined Panel Dimensions
CP106-1 to CP106-7 and CP106-1F to CP106-7F
Flush Panel (F)
Panel
Panel (mm)
Surface Panel
Backbox (mm)
Backbox (mm)
H
W
H
W
D
H
W
D
• model 61 speech unit
CP106-1
270
83
259
73
35
288
100
43
• model 340C power supply
CP106-2
370
83
359
73
35
388
100
43
• model 203 surface lock release
CP106-3
370
83
359
73
35
388
100
43
• full installation and programming instructions
CP106-4
370
83
359
73
35
388
100
43
Ordering information
Order using model CS106-n, where n is the number of stations required
e.g. CS106-1 for a single station system or CS106-5 for five station system
For tradesmen facility append the code TRCS
(A model TS2000-BST time clock is included).
CP106-5
470
83
459
73
35
488
100
43
CP106-6
470
83
459
73
35
488
100
43
CP106-7
470
83
459
73
35
488
100
43
• model CP106 aluminium door panel with integral keypad module
Sizes above 7 buttons are not available – see CS109 page 74
Panel dimensions are approximate and may change without notice.
BLP106 series
Model BLP106 surface front door panels
Bellini combined system – BL106 series
Ordering information
These new stylish panels can be considered as an elegant alternative
Each systems comprise of;
Order using model BL106-n, where n is the number
to the traditional CP106 panels. These surface mounted panels are
• model 801 telephones
of stations required
manufactured from anodised aluminium with a contemporary design
• model BLP106 aluminium door panel with integral keypad module
e.g. BL106-1 for a single station system or BL106-5 for five
and profile. The largest available panel is of 6 buttons and the CS109
• model 61 speech unit
station system
series should be considered on any larger system. Panel dimensions are
• model 340C power supply
For tradesmen facility append the code TRBL
given in the bellini panel section of the catalogue.
• model 203 surface lock release
(A model TS2000-BST time clock is included).
• full installation and programming instructions
85
Posts
The mounting of an entrance panel on a post is often required for a variety of applications e.g. for buildings where
a wall mounting panel is not suitable or for entrances to car parks.
The posts are manufactured from polished stainless steel and are designed to accommodate surface vandal
resistant panels of all sizes. The posts have a stainless steel pedestal welded to the base with fixing holes pre-drilled.
All posts are supplied with surface vandal resistant panels pre-fitted and cable entries pre-drilled. Select the
appropriate post and order together with the chosen panel design. The panels can be multi-button, video, digital
or combined with proximity or coded keypad.
Please contact the Sales Department for guidance on suitable panel designs.
Code
Description
Height mm
CHP1
Car Height Post
1200
PHP1
Pedestrian Height Post
1600
DHP1
Dual Height Post - Pedestrian / Car
1600 / 1200
DHP2
Dual Height Post - HGV / Car
2000 / 1200
Post Width: 80mm
86
Model TS2000-BST
Extension sounders
12V quartz reserve time clock with auto British Summer Time settings.
These units extend the call tone of a door entry telephone to other areas of the premises
to improve audibility. The unit is fabricated in white ABS plastic and can be wall mounted
The TS2000-BST time clock has the facility of automatically adjusting to European/British
in a convenient indoor location. Available models;
time settings. Once the user has programmed the date the clock will automatically adjust
Model RT27 for extensions to the standard 801 telephones
each spring and autumn. This digital timer is purpose made for access control systems
Model BS-RT for extensions to the bellissimo telephones
as it operates from a supply voltage of 12v AC/DC. The clock is designed for wall-
Dimensions: H = 120mm, W = 90mm, D = 38mm
mounting and its main features are;
• Automatic European Time adjustment
Sound Generator and extension tone
model SG1
• 12V AC/DC operating voltage
Like the models above this unit provides an extension of the call tone on a door entry
• LCD display
telephone. In addition to an output of 80 dB at one metre it has 8 user selectable tones.
• Quartz crystal timing with reserve
The unit can be triggered either from a 12 Volts source or from a switch.
• Daily and weekly programs
Dimensions: H = 120mm, W = 90mm, D = 38mm
• 7 day programming
• 8 on/off periods
• 15 repeat options: day, week, weekend, odd weekdays etc.
Flashing beacon
• manual override
This unit gives an effective visual indication of a call at the door entry telephone. This
model FB31
• switching capacity 10A/30V DC
unit is ideal for the 'hard of hearing' or areas with a high level of background noise.
Dimensions: H = 98mm, W = 66mm, D = 40mm
The beacon includes a timer circuit that can be set for between 4 and 40 seconds.
(A model 212 power supply may be required).
Dimensions: H = 113mm, W = 80mm, D = 60mm
Speech unit model 61
This compact unit is fitted to the entrance panel on all our current door entry systems
Flashing beacon
model BS-FB (bellissimo)
(except as indicated below). The unit provides two-way speech and has an individual
This unit gives an effective visual indication of a call at the bellissimo door entry video
volume control for both microphone and speaker. This universal product can be powered
telephone. This unit is ideal for the 'hard of hearing' or areas with a high level of
from either 12V AC or 12V DC depending on the model of telephone used.
background noise.
Dimensions: H = 97mm, W = 58mm, D = 24mm
Dimensions: H = 113mm, W = 80mm, D = 60mm
Speech unit model 51
This unit is generally required as a replacement unit for older systems or for SPA panels
above 10 buttons. The unit provides two-way speech and has an individual volume
control for both microphone and speaker. This universal product can be powered from
either 12V AC or 12V DC depending on the model of telephone used.
Dimensions: H = 136mm, W = 81mm, D = 30mm
87
Model
12V AC
12V DC
Surface
These switches are typically used an access control system to release the door upon
202
✔
✔
✔
exiting in the absence of a manual lock release. The model B24S stainless steel push-
203
✔
✔
✔
204
✔
✔
205
✔
✔
✔
Exit Switch model 5077 and model 5077L (LED indication)
button is incorporated and is designed for heavy use.
Dimensions: H = 110mm, W = 60mm, D = 34mm
206
An alternative style exit switch with the panel manufactured in 2.5 mm 316 marine
FailSecure
FailSafe
Continuously Monitor
Rated
Switch
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
2208
✔
✔
✔
✔
2208 M
✔
✔
✔
✔
✔
✔
✔
2208 F
✔
✔
✔
✔
permanently engraved and includes a model B24S vandal resistant push-button
2208 FM
✔
✔
✔
✔
✔
✔
✔
✔
✔
Standard Release Pressure: withstands up to 300 Kg of impact (breakdown at 600 Kg)
Heavy Duty Release Pressure: withstands up to 500 Kg of impact (breakdown at 1000 Kg)
Plate Dimensions: H = 100mm, W = 100mm
Back-box dimensions: H = 75mm, W = 75mm, D = 45mm
Exit Switch (miniature surface mounting)
Heavy
Duty
✔
✔
grade stainless steel and designed to fit a standard single-gang back-box. The panel is
designed for heavy use.
Delayed
Action
✔
210
209
Exit Switch (flush mounting) model 5078
Mortice
model 5080
Power Supplies
Model 212 (12v AC)
This slim-line surface fitting exit switch is manufactured in a robust alloy casting and has
A wall-mounting, double insulated, fused transformer included in basic audio door entry
universal graphic symbols and is perfect for architrave fitting. The switch is rated at 3A
systems up to 10 stations. It has a nominal output of 12v AC @ 1A. Compliant with EN60950.
with 12v – 24v.
Dimensions: H = 140mm, W = 60mm, D = 53mm
Dimensions: H = 83mm, W = 32mm, D = 25
Model 225 (12v AC)
A wall mounting, double insulated, fused transformer for use with door entry telephone
Fire Switch (Flush)
systems. This supply incorporates a relay for the direct operation of the lock release to
model FS1-F
Flush mounting stainless steel Fireman’s Drop-Key Switch with security fixings and
overcome possible voltage drop on larger systems. It has a nominal output of 12V AC @
permanently engraved with FIRE CONTROL.
2 Amps. Compliant with EN60950.
Dimensions: Plate
Dimensions: H = 110mm, W = 235mm, D = 80mm
Box
H = 150mm, W = 150mm
H = 107mm, W = 107mm, D = 65
Model 340C (12v DC)
88
Fire Switch (Surface) model FS1-S
A wall-mounting fused 12v DC regulated power supply rated at 1.5 Amp for use on DC
Surface mounting red powder coated Fireman’s Drop-Key Switch with stainless steel
door entry systems and our Access Control systems. It can also be used for directly
plate and security fixings, permanently engraved with FIRE CONTROL.
powering failsafe and continuously rated lock releases. Compliant with EN60950.
Dimensions: H = 115mm, W = 115mm, D = 72
Dimensions: H = 140mm, W = 60mm, D = 53mm
Lock Releases
Model PS4 (12v DC)
The standard lock releases are designed to operate with night latch locks on timber
A wall-mounting fused 12v DC regulated power supply rated at 4 Amps for use on video
framed doors. Each release is fabricated from a variety of materials;
entry systems and for powering high current door release mechanisms.
• Main mechanism - plated zinc
• Latch - chrome-plated mazac zinc alloy.
Compliant with EN60950. Dimensions: H = 110mm, W = 235mm, D = 80mm
• Faceplate - epoxy painted steel
• Side cover - stainless steel
89
Model BC-04
Simple identification label replacement
Model BC-10
The Bellcall is a versatile emergency call system which lends itself to a
The Bellcall emergency call system allows individuals, be they patients,
Some of the features of the Bellcall system;
multitude of applications in a number of different markets. Although
residents or staff, to initiate an alarm call in order to obtain assistance.
• Manufactured in the UK.
these systems are typically installed in care and nursing homes there
An indicator panel will alert an attendant by sounding an alarm and
• Hard-wired; standard alarm cable or CAT5.
are other market sectors that have emergency call systems installed;
by illuminating an LED lamp. Each Lamp has a nameplate label to
• Call point units fit standard single or double gang electrical boxes
• Care Homes • Nursing Homes • Private Hospitals and Hostels
identify the caller or room. The call is generally cleared by attending
• Housing, Employment and Benefit offices • Interview Rooms
• Doctor Surgeries and Medical Centres • Disabled Toilets
• Leisure, Fitness, Health, Spa and Beauty Centres
(surface or flush).
the room where the call originated and by resetting the callpoint.
• Operates on 12v DC with optional standby battery.
Calls can be made from either a wall-mounted callpoint, a ceiling pull
• Two call levels; standard or emergency with differing alarm tones.
switch or a pendant (pear-drop) switch.
• Call reset using pushbutton and/or magnetic key
• Alarm Tone mute.
• External alarm relay.
• Police Stations • Remand Centres • Immigration Centres
90
Model BC-10
Model BC-20
Model BC-30
Indicator Panels
Each panel has three back-lit symbols;
Standard Call Point – generates standard calls.
There are four models of indicator panel available; 4-zone, 10-zone, 20-
Power
Blue
Power On
Emergency Call Point – generates emergency calls. Commonly used
zone and 30-zone. Up to four indicator panels (10, 20, 30-zone) can be
Urgent
Red
Flashes in response to an Emergency Call
in Care Homes.
connected together to give a maximum of 120 zones on one system.
Cancel
Amber
Flashes in response to a standard Alarm
Alert Call Point – allows a user-generated standard call or an alert call
(also press to mute)
by staff in order to call for assistance. Commonly used in Nursing
Homes and Hospitals.
The 10, 20 and 30-zone panels are of a contemporary style in white
with grey contrasting background to aid identification of the caller.
Model
Description
Dimensions
These Indicator panels are designed for surface fitting onto any
BC-04
4-zone indicator panel
85 x 145 x 35 mm
All call points offer two methods of Call Reset which are selectable at
convenient wall to maximise visibility for the attendants. The panels
BC-10
10-zone indicator panel
180 x 160 x 35 mm
installation;
have touch-sensitive buttons for the attendant functions such as
BC-20
20-zone indicator panel
180 x 290 x 35 mm
Button Reset
For general use
alarm mute.
BC-30
30-zone indicator panel
180 x 420 x 35 mm
Magnetic Key Reset
For use generally in Nursing Homes to
The 4-zone panel (model BC-04) is an attractively designed, compact
Call Point Units
unit which can be flush or surface-mounted onto a double gang
All call points fit standard surface or flush fitting single gang
electrical box.
electrical boxes. Any number of call points can be can be wired into
prevent patients or the caller cancelling
a single zone. There are essentially three types of callpoint models
The 10, 20, 30-zone panels all have replaceable strips which can be
available, each available with or without a jack socket; the jack socket
printed with a description of the alarm zone, or for example a patients
is for the connection of a pendant switch also commonly known as a
name or a room number. This flexible system allows the attendants to
‘pear push’ switch:
make regular changes without damaging or marking the panels.
their call.
Model
Description
Dimensions
BC-CP
Standard Call Point
85 x 85 x 35 mm
BC-CPJ
Standard Call Point with Jack Socket
85 x 85 x 35 mm
BC-EP
Emergency Call Point
85 x 85 x 35 mm
BC-EPJ
Emergency Call Point with Jack Socket
85 x 85 x 35 mm
BC-AP
Call Point with Alert
85 x 85 x 35 mm
BC-APJ
Call Point with Alert with Jack Socket
85 x 85 x 35 mm
91
Model BC-CP
Model BC-CPJ
Model BC-EP
Model BC-EPJ
Model BC-AP
Model BC-APJ
Standard range of peripherals and accessories
Model BC-OD (illuminated)
Model BC-PD2
Model BC-PD3
Pendant switch
Model BC-CS
BC-PD2 and BC-PD3
Model BC-K10
Model BC-K50
Model BC-ODS
Ceiling pull switch
BC-CS
Model Description
Dimensions
BC-PD2 Pendant Switch with 2m lead & jack
140 x 40 x 20 mm
BC-PD3 Pendant Switch with 3m lead & jack
140 x 40 x 20 mm
BC-CS
85mm diam. x 25mm
Ceiling Pull Switch
A hand-held switch typically used for patients in bed or seated on a chair.
Ceiling pull-switches provide auxiliary call points within a room. These
BC-OD Over-door indicator light
The switch has been ergonomically designed for comfort and has a
switches are surface mounted and are typically installed in bathrooms
BC-ODS Over-door indicator light with sounder 85 x 85 x 45 mm
reassurance light when operated. If the lead is inadvertently removed from
or toilets. They are supplied with two red triangles to aid pulling the
BC-K10 Magnetic Reset Keys (pack of 10)
60 x 15 mm
its socket on the call point a call will automatically be generated. Two
cord; one for standing use and one for prone use. A red re-assurance
BC-K50 Magnetic Reset Keys (pack of 50)
60 x 15 mm
models are available one with a 2 metre lead and one with a 3 metre lead.
light illuminates on the ceiling unit when a call is made.
85 x 85 x 45 mm
Power supply requirements
Over-door light
92
BC-OD and BC-ODS
Magnetic reset keys
BC-K10 and BC-K50
The system is powered by 12v DC power supplies only;
These lights are typically installed in corridors outside rooms or wards
All call points can be reset using either a Push-Button or a Magnetic
Model 340C
12v 1.5A for basic systems
to indicate when a call has been generated. Up to 4 zones can be
Key. These bright yellow keys are typically required in care and nursing
Model 640
12v 1A battery backup supply
combined to cover common areas. Two model are available; a
homes, to prevent the patient from cancelling their call. The keys are
Model PS4
12v 4A for system with more than 10 Over-door lamps
standard model and a model that includes a sounder.
supplied in packs of 10 or 50 each with a key ring.
Model 840
12v 4A battery backup supply
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement