Hanns.G HT11
19”
Liquid Crystal Display Television
Fernsehers mit Flüssigkristallanzeige
Téléviseur à Écran à Cristaux Liquides
TV de Pantalla de Cristal Líquido
Questo televisore LCD
LCD (vloeibaar-kristalscherm) TV
Televisor com Ecrã de Cristais Líquidos
Telewizora ciekłokrystalicznego
Жидкокристаллического
Телевизионного Дисплея
S_LCD2_UM_EUR_R01_K
62-01000016G000
5:31 PM
Table of Contents
Regulatory Information ................................................................ 3
Description of Warning Symbols .................................................. 3
Safety Notices ............................................................................. 4
Preface ....................................................................................... 6
Warranty and Service .................................................................. 6
1. Getting Started ........................................................................ 8
1.1 Package Contents ............................................................. 8
1.2 Introducing the TV ............................................................. 9
1.2.1 Features .................................................................. 9
1.3 Control Panel .................................................................. 10
1.4 Input and Output Jacks .................................................... 11
1.5 Remote Control ............................................................... 12
2. Setting up your TV ................................................................. 16
2.1 Basic Connections ........................................................... 16
2.1.1 Power Connection .................................................. 16
2.1.2 Connecting an Antenna or Cable TV ........................ 16
2.2 Connecting External Devices ........................................... 17
2.2.1 Connecting External Earphones .............................. 17
2.2.2 Connecting to AV Devices ....................................... 18
2.2.3 Connecting a VCR/ STB/ DVD Player Using
Component Video ................................................... 19
2.2.4 Connecting a VCR/ STB/ DVD Player Using
Composite Video .................................................... 19
2.2.5 Connecting a Decoder or VCR/ STB/ DVD
Player Using SCART .............................................. 20
2.2.6 Connecting a PC .................................................... 20
2.2.7 Connecting HDMI ................................................... 21
2.3 Using the TV ................................................................... 22
2.3.1 Turning the TV On and Off ...................................... 22
2.3.2 Switching Source Signals ........................................ 22
2.3.3 Performing an Automatic Channel Search ................ 22
2.3.4 Selecting Programs ................................................ 22
2.3.5 Adjusting the Volume .............................................. 22
3. Adjusting On-Screen Display (OSD) Settings .......................... 23
3.1 OSD Setting Menus ......................................................... 24
3.2 Adjusting Picture Settings ................................................ 24
1
English
19EU.book Page 1 Thursday, April 10, 2008
19EU.book Page 2 Thursday, April 10, 2008
5:31 PM
English
Table of Contents
3.3 Adjusting Sound Settings ................................................. 25
3.4 Adjusting Channel Settings (Analog TV) ........................... 25
3.5 Adjusting DTV Settings (Digital TV) .................................. 27
3.6 Adjusting PC Setup Settings ............................................ 29
3.7 Adjusting Setup Settings ................................................. 29
4. Troubleshooting ..................................................................... 31
5. Specifications ........................................................................ 32
5.1 PC Mode Support Timing ................................................. 33
5.2 HDMI Mode Support Timing ............................................. 33
2
19EU.book Page 3 Thursday, April 10, 2008
5:31 PM
English
Regulatory Information
CE Conformity Statement
This device is in conformity with the requirements of EU Council Directive
2004/108/EC on the approximation of the laws of the Member States relating to
electromagnetic compatibility and Directive 2006/95/EC on the harmonization of
the laws of Member States relating to electrical equipment for use within certain
voltage limits. Hannspree cannot accept responsibility for any failure to satisfy
the requirements resulting from a non-recommended modification of the device.
Description of Warning Symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
CAUTION
This symbol is used to alert users
to pay attention to important
descriptions regarding usage,
maintenance (repair), and
additional important information
related to this TV.
This symbol is used to alert users
to the risk of electric shocks due
to dangerous and uninsulated
components.
3
19EU.book Page 4 Thursday, April 10, 2008
5:31 PM
English
Safety Notices
Installation Safety Notes
Location
Avoid allowing the TV to get prolonged exposure to sunlight or other strong
sources of heat. Leave sufficient distance between the TV and the wall to
provide enough space for the emission of heat.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
These servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Notes:
•
•
4
The LCD TV is for entertainment use only and visual display
tasks are excluded.
This device uses a VGA connector to connect to a PC. To reduce
the influence of main frequency on the source signal, use a VGA
monitor cable with ferrite shield.
5:31 PM
English
19EU.book Page 5 Thursday, April 10, 2008
Personal Safety
1. To avoid overloading the power supply, never plug too many electrical
devices into an outlet, power strip, or extension cable.
2. Dangerous high-voltage electric power components are located inside the
TV. To avoid electric shock, do not disassemble the casing.
3. Do not place or drop metals, small objects, or flammable materials into
the vent of the TV.
4. If the TV is dropped, falls down, or is otherwise damaged, unplug the
power cord immediately and contact an authorized service technician.
5. If any fluid is sprayed or dropped into the TV, contact an authorized
service technician.
6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the
screen is broken, do not touch the broken glass.
7. Do not allow children to use the TV unattended.
8. Be careful when disconnecting the power plug. Hold the plug. Do not
attempt to disconnect the plug by pulling on the power cord.
Installation
1. Do not place the TV in locations where there is excessive steam or dust.
2. Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet,
or in a sealed cabinet.
3. Install the outdoor antenna away from power transmission lines to avoid
possible danger.
5
19EU.book Page 6 Thursday, April 10, 2008
5:31 PM
English
Preface
Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD
TV). Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or
operating your TV. To ensure the safe and correct installation and operations of
the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV.
The information in this manual has been carefully checked for accuracy;
however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not
be liable for direct, indirect, special, exemplary, incidental or consequential
damages arising from any defect or omission in this manual, even if advised of
the possibility of such damages in advance.
Warranty and Service
For complete warranty service information, please refer to the “Warranty Card”
enclosed with your TV.
6
5:31 PM
English
19EU.book Page 7 Thursday, April 10, 2008
Copyright
© Copyright 2008 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and distributed under
licenses restricting its use, copying and distribution. No part of this manual may
be reproduced in any form by any means without the prior written authorization
of Hannspree. The TV described in this manual may include copyrighted
software of Hannspree (or other third parties). Hannspree (or other third parties)
preserves the exclusive rights for copyrighted software, such as the right to
distribute or reproduce the copyrighted software. Accordingly, and to the extent
allowed by applicable law, any copyrighted software contained in the product
described herein shall not be distributed, modified, reverse engineered, or
reproduced in any manner without the prior written authorization of Hannspree
(or of other third parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other
product names, trademarks or logos mentioned herein are used for identification
purpose only, and may be the trademarks or registered trademarks of their
respective owners.
The purchase of the product described herein shall not be deemed to grant,
either directly or by implication, estoppel or otherwise, any license under the
copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a
product.
Trademark Notice
Hannspree products incorporate High-Definition Multimedia
Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
7
19EU.book Page 8 Thursday, April 10, 2008
1
English
1.1
5:31 PM
Getting Started
Package Contents
Make sure the following components are included in the box. Please contact
Hannspree Customer Service immediately if anything is missing or damaged.
•
TV
•
User’s manual
•
Quick start guide
•
Warranty card
•
Power cord
•
Remote control and batteries
According to WEEE regulation , this TV can't be handled as
normal trash in Europe when it is out of usage. Please refer to the
recycle information from our website to handle it.
8
1.2
5:31 PM
Introducing the TV
You can watch PAL/ SECAM broadcast, cable or digital television channels, and
easily connect a VCR, STB or DVD player to the standard CVBS, S-Video and
SCART input ports (location of these ports depends on model). You can also use the
TV as a monitor for your PC by connecting it through the D-sub port.
Convenient control buttons located on the TV and a handy remote control let you
change channels, adjust the volume, and change display settings through an easyto-use on-screen display menu system. The built-in stereo speakers provide full rich
sound and a convenient audio output port lets you connect to an external audio
system or earphones.
1.2.1
Features
•
Built-in TV tuner
•
Audio/ Video support:
–
PC audio input
–
YPbPr/CVBS video inputs
–
SCART input/output
–
3.5 mm stereo earphone output
–
VGA input
–
HDMI input
–
One set of R/ L audio inputs for YPbPr/CVBS
•
On-Screen Display (OSD) menu system
•
Teletext (TTX) 1.5v. 252 pages
•
Built-in stereo speakers
•
3D Comb Filter
•
Noise Reduction
Note:
The supporting devices mentioned in this manual may vary on different models.
For more information, please refer to the manufacturer’s user manual or the Quick
Start Guide of your TV model.
9
English
19EU.book Page 9 Thursday, April 10, 2008
19EU.book Page 10
English
1.3
Thursday, April 10, 2008
5:31 PM
Control Panel
Description
ICON
Power
Function
Press to turn the TV on or off.
Source
INPUT
Press to display the input source list.
Menu
MENU
Press to open the OSD menu.
Program select
PS
Press to increase the program number
or move upward to the previous item on
the OSD menu.
Program select
PT
Press to decrease the program number
or move downward to the next item on
the OSD menu.
Volume adjust
VOL +
Press to increase the volume or move
to the right on the OSD menu.
Volume adjust
VOL -
Press to decrease the volume or move
to the left on the OSD menu.
Remote IR
sensor
Receive incoming remote control
commands.
Power/ Standby
indicator
Indicate power or standby status.
Speakers
Deliver high-quality sounds.
10
1.4
Thursday, April 10, 2008
5:31 PM
English
19EU.book Page 11
Input and Output Jacks
Description
Connector
Cable/Antenna
Function
Connect to an antenna or cable TV.
TV / DTV
CABLE/ANTENNA
Earphone Output
Audio for PC
Input
L
Composite Video
Input
SCART Input/
Output
VGA (PC) Input
Service
HDMI Input
Connect to a PC’s line/ audio out
port.
PC LINE IN
Audio Input
Component
Video Inputs
Connect to earphones or external
speakers with built-in amplifier.
EAR PHONE
AUDIO
R
Connect to an external device, such
as a VCR, STB, or a DVD player.
V
Y
PB
PR
SCART IN / OUT
VGA
SERVICE
HDMI
Connect to an external device, such
as a VCR, STB, or a DVD player;
YPbPr & CVBS shares one R/L
Connect to an external device, such
as a VCR, STB, or a DVD player.
Connect to an external device, such
as a VCR, STB, or a DVD player
with composite/ RGB output.
Audio Input (R/L)
Video Input (RGB/V); S-Video Input
Audio Output (R/L)
Video Output (V)
Connect to a PC’s VGA port.
RS-232 port for service purpose
only. Not available for users.
Connect to devices such as a DVD
player or set-top box.
11
19EU.book Page 12
Thursday, April 10, 2008
English
Description
Connector
Power Connector
1.5
5:31 PM
AC IN
Function
Connect to the provided power
cord.
Remote Control
Description
Icon
Power
Source
Press to turn the TV on or off.
INPUT
Last
Press to display the input source list.
Use to select a program directly. Press 09 to enter the program numbers (press 1
and 0 for program 10).
Keypad
Pro.List
Function
Pro.LIST
LAST
Press to display the features contained.
(For DTV only)
Press to return to the last channel
selected.
Information
INFO
Press to display current channel/
program information.
Menu
MENU
Press to turn the on-screen display
(OSD) menu on/ off; confirm the setting.
Press up, down, left or right to scroll
through the on-screen display menus.
Arrows
OK
12
OK
Press to confirm the selection or setting
and return to the previous menu when
using OSD menus.
Thursday, April 10, 2008
Description
Icon
5:31 PM
Function
Electronic
Program
Guide
EPG
Press to display program information.
(For DTV only)
Teletext mode
TEXT
Press to switch to the teletext mode.
Volume adjust
VOL
/ VOL
MUTE
Mute
Press VOL + to increase audio volume.
Press VOL - to decrease audio volume.
Press to eliminate sound. Press it again
or press the volume adjust buttons to
restore sound.
Dual sound
Press to change the multi sound
selection of the TV channel.
Select
program
Press PS to increase the program
number.
Press PT to decrease the program
number.
Index
Mix
Subpage
Switch size
Hold
P
/ P
INDEX
English
19EU.book Page 13
Press to display a table of the available
teletext subjects.
MIX
Press to display the text over the program
on the screen.
SUB.PAGE
Press to go to the sub page.
(Programmable in the teletext mode only)
SIZE
Press to adjust screen size.
(Programmable in the teletext mode only)
HOLD
Press to inactivate automatic page
change which only happens when more
than one teletext page exists.
(Programmable in the teletext mode only)
13
19EU.book Page 14
Thursday, April 10, 2008
English
Description
5:31 PM
Icon
Function
Reveal
REVEAL
Press to display the hidden information,
such as solutions to puzzles.
(Programmable in the teletext mode only)
Subtitle
SUB.TITLE
Favorite
channel
FAV.
TV/Radio
TV/RADIO
Aspect ratio
Picture mode
Sleep timer
ASPECT
PIC
SLEEP
Press to display the subtitles while
watching DTV.
Press to select or store your favorite
channels. (For DTV only)
Press to select TV or radio source mode.
(For DTV only)
Press to adjust the viewing angle with
aspect ratio Auto, 16:9, or 4:3. (Not for
PC mode)
Press to select Standard/ Vivid/ Soft/User
mode.
Press repeatedly to set the sleep timer
(15, 30, 45, or 60 minutes).
A countdown timer is displayed on the
middle of the screen during the last
minute to alert the user.
Cancel the timer by pressing the button
until the displayed time disappears.
Note:
14
•
For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at TV.
•
The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
•
Aim the transmitter on the remote control at the signal sensor and ensure
that there are no obstacles between them.
Thursday, April 10, 2008
5:31 PM
English
19EU.book Page 15
CAUTION
•
If the remote control is not used for a long period, remove the batteries
and store them properly.
•
Handle damaged or leaking batteries carefully, and wash hands with
soap if they come in contact with leaked chemical fluids.
•
If your remote control has two batteries, do not mix new and old
batteries, or the life of the new batteries will be shortened. Chemical
fluids may leak from the old batteries.
•
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer’s
instructions.
•
Refer to your local recycling or waste disposal rules and contact a local
waste disposal vendor to dispose of used batteries.
•
The remote control cover may have a magnet in it, so do not place
magnetic sensitive items such as watches, credit cards, or flash media
close to the cover.
•
Do not use force when pulling the remote control cover open; you may
damage the hinge.
15
19EU.book Page 16
2
English
2.1
Thursday, April 10, 2008
5:31 PM
Setting up your TV
Basic Connections
2.1.1
Power Connection
1
Connect the power cord to the AC IN input jack on the rear of the TV.
2
Insert the plug at the other end of the power cord into a power outlet.
2.1.2
Connecting an Antenna or Cable TV
Connect one end of the VHF/UHF (Antenna) or CATV cable to TV/DTV jack on the
rear of the TV.
Antenna
TV / DTV
CABLE/ANTENNA
Ground Clamp
Coaxial Cable
Ground
Note:
16
•
Images are for illustration only and may vary by model or region.
•
If you cannot receive channels after connecting to an antenna or cable TV
line, try scanning for channels.
2.2
Thursday, April 10, 2008
5:31 PM
Connecting External Devices
Connect external devices such as VCRs, STBs, DVD players, video game consoles,
earphones, or a PC to the TV using the appropriate ports on the rear of the TV.
2.2.1
Connecting External Earphones
Headphones
EAR PHONE
Speakers
(Built-in Amplifier)
Note:
•
External speakers or headphones are not included with the TV.
•
The internal TV speakers will not output sound when earphones are
plugged in.
•
Use external speakers with built-in amplifiers only.
•
Only one external device for sound can be connected at a time.
17
English
19EU.book Page 17
19EU.book Page 18
English
2.2.2
Thursday, April 10, 2008
5:31 PM
Connecting to AV Devices
The following diagram illustrates how to connect the AV devices to your TV via HDMI
(A), Component (B), SCART (C), and Composite (D) ports.
A
HDMI
B
or
L
AUDIO
R
Y
C
PR
PB
or
D
or
V
L
AUDIO
R
SCART IN / OUT
HDMI Cable Audio Cable Video Cable
(Optional)
(Optional) (Optional)
SCART Cable
(Optional)
Video/ Audio Cable
(Optional)
HDMI
Video Game
Console
18
L R Y PB PR
SCART
or
V L R
VCR
STB
DVD
2.2.3
Thursday, April 10, 2008
5:31 PM
English
19EU.book Page 19
Connecting a VCR/ STB/ DVD Player Using
Component Video
Connect the TV to a VCR/ STB/ DVD player using the component video inputs.
L
AUDIO
R
Y
PB
PR
Audio Cable
(Optional)
VCR
STB
DVD
Video Cable
(Optional)
2.2.4
Connecting a VCR/ STB/ DVD Player Using
Composite Video
Connect the TV to a VCR/ STB/ DVD player using the composite video input.
V
L
AUDIO
R
Video Cable
(Optional)
VCR
STB
DVD
Audio Cable
(Optional)
19
19EU.book Page 20
English
2.2.5
Thursday, April 10, 2008
5:31 PM
Connecting a Decoder or VCR/ STB/ DVD Player
Using SCART
Connect the TV to a decoder or VCR/ STB/ DVD player using the SCART input. You
can choose to use a SCART cable or adapter for the connection depending on the
ports available on your decoder or player.
SCART IN / OUT
Decoder
VCR
STB
DVD
SCART Cable
(Optional)
2.2.6
Connecting a PC
Connect the TV to your PC to use it as the monitor using the VGA port as shown.
1
Connect the VGA port of the
TV to the VGA output of the
PC.
2
Connect the line out port of
the PC to the PC LINE IN port
of your TV to listen to the
audio from the PC.
VGA
PC LINE IN
Audio Cable
(Optional)
VGA Cable
(Optional)
20
PC
2.2.7
Thursday, April 10, 2008
5:31 PM
Connecting HDMI
HDMI (High Definition Multimedia Interface) assures that the best video signal is
always sent form source to the TV.
Refer to the following illustration to connect an HDMI device to the TV.
HDMI
DVD Player
HDMI Cable
(Optional)
21
English
19EU.book Page 21
19EU.book Page 22
English
2.3
5:31 PM
Using the TV
2.3.1
1
Thursday, April 10, 2008
Press
Turning the TV On and Off
on the control panel or remote control. The power LED indicator on the
front of the TV changes from amber to blue, indicating that the power is on.
2
Press
again. The power LED changes from blue to amber, indicating that the
TV is off. Wait 3-5 seconds before you do anything after the shut down.
2.3.2
Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal to set TV source for channel search. Press OK to confirm.
2.3.3
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the automatic channel
search first.
1
Press MENU on the control panel or remote control, then select to enter the
Channel or DTV menu.
2
Select an appropriate area.
3
Select the Auto Search item to run the channel search.
2.3.4
Selecting Programs
•
Press PS on the control panel or remote control to increase the program
number. Press PT on the control panel or remote control to decrease the
program number.
•
Enter the specific program number by pressing the number buttons on the
remote control.
2.3.5
Adjusting the Volume
1
Press VOL+ to increase the volume. Press VOL- to decrease the volume.
2
Press
MUTE
to eliminate sound, and press
buttons to restore the original volume.
22
MUTE
again or press the volume
3
Thursday, April 10, 2008
5:31 PM
Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple method to
adjust the TV settings. The OSD menu can be accessed through the buttons either
on the control panel or the remote control.
Before going to details of each OSD item, you may get acquainted with the
placement of the OSD system:.
CURRENT MENU:
Displays the title of the
currently chosen menu.
MAIN MENU:
Displays a list
of menu items.
The chosen
item is marked
by a different
color than
other menu
items.
Main Menu
Picture Mode
Picture
Standard
Brightness
50
Contrast
50
Sharpness
5
Colour
50
Select
MENU
Hue
Exit
50
Backlight
2
Colour Temp
Standard
ADJUSTABLE ITEMS:
Displays the setting/ value
of the adjustable items.
INSTRUCTIONS:
Quick instructions for
adjusting the settings.
Function
TV Control Panel
Remote Control
OSD Menu
MENU
MENU
Up
PS
Arrow
Down
PT
Arrow
Select/ Increase
VOL +
Arrow
Select/ Decrease
VOL -
Arrow
Return
MENU
MENU
23
English
19EU.book Page 23
19EU.book Page 24
English
3.1
Thursday, April 10, 2008
5:31 PM
OSD Setting Menus
Follow the instructions indicated on the right side of the OSD Function Menu. Press
PS / PT on the control panel or
/
arrow keys to scroll through the menus,
VOL + on the control panel or the arrow key to select an item, or MENU to exit the
OSD menu.
The following menus can be set by different adjustment methods.
3.2
1
Adjusting Picture Settings
Press MENU to enter the OSD Main Menu
screen.
Main Menu
Picture Mode
Picture
Standard
Brightness
50
Contrast
50
Sharpness
5
Colour
50
2
3
Press
4
Press
5
Press
or
or scales.
6
7
8
Press MENU to select the changed setting and return to the Picture Menu.
Press
to select Picture.
to enter the Picture Menu.
/
to select an item.
to change the mode setting
MENU
Hue
50
Backlight
2
Colour Temp
Standard
Press MENU to exit the Picture menu.
The Picture menu can be used to adjust the Picture Mode, Brightness, Contrast,
Sharpness, Colour, Hue, Backlight, and Colour Temp settings.
• The Picture Mode can be set to Standard, Vivid, Soft, or User.
• The Colour Temp can be set to Standard, Cool, or Warm.
Note:
The items available on the OSD may vary depending on the input signal source.
24
Select
Exit
3.3
1
Thursday, April 10, 2008
5:31 PM
English
19EU.book Page 25
Adjusting Sound Settings
Press MENU to enter the OSD Main Menu
screen.
Main Menu
Sound
Standard
Sound Mode
Balance
0
Treble
50
Bass
50
2
3
Press
4
Press
5
Press
or
or scales.
6
7
8
Press MENU to select the changed setting and return to the Sound Menu.
Press
to select Sound.
to enter the Sound Menu.
/
Select
MENU
Exit
to select an item.
to change the mode setting
Press MENU to exit the Sound menu.
The Sound menu can be used to adjust the Sound Mode, Balance, Treble, and Bass
settings.
• The Sound Mode can be set to Standard, Music, Movie, Speech, or User.
Note:
The items available on the OSD may vary depending on the input signal source.
3.4
1
Adjusting Channel Settings (Analog TV)
Press MENU to enter the OSD Main Menu
screen.
Main Menu
Area
Channel
England
Channel
1
Colour System
AUTO
Sound System
AUTO
2
3
Press
4
Press
5
Press
or
or scales.
6
7
8
Press MENU to select the changed setting and return to the Channel Menu.
Press
to select Channel.
to enter the Channel Menu.
/
to select an item.
to change the mode setting
Select
MENU
Exit
Auto Search
Manual Search
Channel Edit
Press MENU to exit the Channel menu.
The Channel menu includes the following options: Area, Channel, Colour System,
Sound System, Auto Search, Manual Search, and Channel Edit settings.
25
19EU.book Page 26
Thursday, April 10, 2008
5:31 PM
English
• The area can be set to England, Italy, France, Spain, Netherlands, Portugal,
Turkey, Poland, Russia, and Germany*.
• The Colour System can be set to AUTO, PAL, or SECAM.
• The Sound System can be set to AUTO, BG, DK, I, L, or L’.
• Select Auto Search to activate the automatic TV channel search.
Main Menu
Auto Search
Channel
1
MENU
Exit
75.35 MHZ
• Press
to enter the Channel Edit item, the Channel Editor allows you to edit the
detailed items including Channel, Name, Fine Tune, and Skip of each channel.
Channel Editor
Channel Frequency System
1
49.75
DK
Name
---
Skip
Off
2
49.75
DK
---
On
3
49.75
DK
---
On
4
49.75
DK
---
On
5
49.75
DK
---
On
6
49.75
DK
---
On
7
49.75
DK
---
On
8
49.75
DK
---
On
9
49.75
DK
---
On
10
49.75
DK
---
On
Swap
Insert
Move
Copy
Channel Editor
Channel
1
Name
---
Fine Tune
Skip
Off
Delete
Edit
Notes:
•
*If the desired area is not shown on the list, the suggested default is
Germany.
•
The Channel settings are available when the signal is set to TV source.
26
3.5
Thursday, April 10, 2008
5:31 PM
English
19EU.book Page 27
Adjusting DTV Settings (Digital TV)
1
Press MENU to enter the OSD Main Menu
screen.
2
3
Press
4
Press
/
5
Press
scales.
or
6
7
8
Press MENU to select the changed setting and return to the DTV Menu.
Press
Main Menu
DTV
Channel Management
Area
to select DTV.
England
Select
Auto Search
to enter the DTV Menu.
MENU
Exit
Manual Search
to select an item.
Preferred Audio
English
Preferred Subtitle
English
to change the mode setting or
Press MENU to exit the DTV menu.
The DTV menu includes the following options: Area, Auto Search, Manual Search,
Preferred Audio, Preferred Subtitle, Parental Lock, Parental Rating, and Time
Settings.
• Press
to enter the Channel Management item, the DTV Channel Manager allows
you to organize, sort, group, or delete TV/ Radio channels.
DTV Channel Manager
Channel Organizer
Channel Sorting
Channel Grouping
Delete All TV Channels
Delete All Radio Channels
• The area can be set to England, Italy, France, Spain, Netherlands, Portugal, Turkey,
Poland, Russia, and Germany* (default).
• Select Auto Search to activate the automatic TV/ Radio channel search.
Channel Search
S.No.
TV Channel
Channel 38 UHF
Progress
S.No.
Radio Channel
610000KHz/8M
34%
Notes:
•
It is recommended to use the TV in the listed areas.
•
*The recommend default is Germany if your area is not listed; channel
reception is not guaranteed if used outside the listed areas.
27
19EU.book Page 28
Thursday, April 10, 2008
5:31 PM
English
• Select Manual Search to search the TV/ Radio channels manually.
Manual Search
Channel Name
5
5
Freq(KHz)
177500
6
BandWidth
7M
7
8
9
10
Signal
Quality
0%
0%
• Select Parental Lock to change the password. The old password is set to 0000 by
default.
Parental Lock
Enter Old Password
Enter New Password
Confirm New Password
• Select Parental Rating to set the channel rate. Input the default password 0000 to enter
the System Setup window.
System Setup
System Setup
Parental Rating
OFF01/01/2008
Enter password
MENU Exit
INFO Help
Parental Rating
OFF
OFF01/01/2008
4
5
5
6
6
7
7
8
8
9
9
Move
MENU Exit
Select
INFO Help
Move
• Select Time to configure GMT Offset and Summer Time settings.
Time
GMT Offset
Auto
DEU
Summer Time
OFF
GBR
ITA
FRA
ESP
NLD
TWN
CHN
MENU Exit
INFO Help
Move
Select
Note:
The DTV settings are available when the signal is set to DTV source.
28
OFF
4
Select
3.6
Thursday, April 10, 2008
5:31 PM
English
19EU.book Page 29
Adjusting PC Setup Settings
1
Press MENU to enter the OSD Main Menu
screen.
2
3
Press
4
Press
/
5
Press
scales.
or
6
7
8
Press MENU to select the changed setting and return to the PC Setup Menu.
Press
Main Menu
Auto Adjust
to select PC Setup.
to enter the PC Setup Menu.
PC Setup
Off
H Position
0
V Position
0
Phase
0
Clock
0
Select
MENU
Exit
to select an item.
to change the mode setting or
Press MENU to exit the PC Setup menu.
The PC Setup menu can be used to adjust the Auto Adjust, H Position, V Position,
Phase, and Clock settings.
Note:
The PC Setup settings are available when the signal is set to PC source.
3.7
Adjusting Setup Settings
1
Press MENU to enter the OSD Main Menu
screen.
2
3
Press
4
Press
5
Press
or
or scales.
6
7
Press MENU to select the changed setting and return to the Setup Menu.
Press
to select Setup.
to enter the Setup Menu.
/
to select an item.
to change the mode setting
Main Menu
Setup
Language
English
TT Language
West
SCART
CVBS
HDMI Scan Info
Overscan
Aspect
AUTO
Dynamic Contrast
On
OSD Time
15 Secs
Background
Off
Reset
Select
MENU
Exit
Press MENU to exit the Setup menu.
29
19EU.book Page 30
English
8
Thursday, April 10, 2008
5:31 PM
The Setup menu can be used to adjust the Language, TT Language, SCART, HDMI
Scan Info, Aspect, Dynamic Contrast, OSD Time, Background, Reset settings.
• The available nine languages are English, Italian, Spanish, Portuguese,
French, German, Russian, Polish, and Dutch.
• The available TT languages are West, East, Russian, Arabic, and Farsi.
• The SCART sockets selection can be set to AUTO, CVBS, RGB, or S-VIDEO.
• When connecting to an HDMI device, the TV will be automatically set to display at the
full screen size.
• The Aspect ratio can be set to AUTO, 4:3, or 16:9. (Not for PC mode)
• The Dynamic Contrast can be set to On or Off.
• The OSD Time can be set to 5, 10, 15, 20, 25, or 30 Secs.
• The Background can be set to Off or blue. (Only for TV)
• Select Reset to restore to the default settings.
30
4
Thursday, April 10, 2008
5:31 PM
Troubleshooting
Situation
Solution
•
Connect the power cord properly.
Check if the power LED is on or not.
Press power on the control panel or remote control.
Press source to cycle through connected video sources.
Press program up or program down to switch to other TV
stations.
Make sure all cables are connected properly.
No picture, or poor picture,
sound is OK.
•
•
Check the antenna and cable connections.
Adjust the brightness in the OSD menus.
Picture is not in color.
•
Adjust the saturation in the OSD menus.
Picture is OK, no sound.
•
•
•
•
Make sure the source device is functioning properly.
Make sure the audio cable is connected securely.
Turn the mute off.
Press volume up on the control panel or remote control.
One of the speakers has no
sound.
•
Adjust the balance in the Sound OSD menu.
Cannot receive some TV
channels using cable TV.
•
Use the Auto Search function in the OSD menu.
Want to reset TV settings.
•
Use the Reset function in the Setup OSD menu.
•
If OSD items are colored in gray, the system is in a state
such that those settings are not available.
No picture and sound.
Cannot operate menus.
Screen image turns over.
•
•
•
•
•
•
Make sure the video signal cable is connected properly.
•
Adjust the location of the antenna, placing it far from
roads or sources of interference.
Check the antenna and the video signal line connections.
Snow appears on the screen.
•
Blurred or overlapped
images.
•
•
•
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or change the video
signal cable.
Remote control doesn’t work.
•
•
•
•
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote control and the
sensor is clear.
Try operating the remote control at a closer distance to
the TV.
•
31
English
19EU.book Page 31
19EU.book Page 32
5
Thursday, April 10, 2008
5:31 PM
English
Specifications
LCD Panel Size
19 inch TFT
Screen Format
5:4
Panel Resolution
1280 (H) x 1024 (V)
TV System
ATV: PAL, SECAM
DTV: DVB-T
AV (Pal/ Secam/ NTSC)
SCART (RGB/ CVBS/ S-Video)
Video System
HDMI
HDTV (YPBPR)
PC (VGA)
AV / HDTV: (RCA x 2) R/L in
SCART (R/L In; R/L Out)
Audio System
HDMI: HDMI
PC Audio In: Phone jack (Green)
Audio out: Earphone jack (Pink)
Built-in Stereo
Amplifier Output
Power Consumption
Power Supply
Weight
32
3W x 2
Standby mode under 1W, Power on 55W (Typical)
AC Input: 100V~240V / 50Hz ~ 60Hz
4.5kg (Max.)
5.1
Thursday, April 10, 2008
5:31 PM
English
19EU.book Page 33
PC Mode Support Timing
Mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel
Frequency
(MHz)
VGA 60
640x480 @60
31.469
59.941
25.175
SVGA 60
800x600 @60
37.879
60.317
40.000
XGA 60
1024x768 @60
48.363
60.004
65.000
SXGA 60
1280x1024 @60
63.981
60.020
108.000
5.2
HDMI Mode Support Timing
Your TV supports video timing in the following resolutions:
•
480i
•
480p
•
576i
•
576p
•
720p
•
1080i
•
1080p
33
MEMO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement