technical guide models: yhjr18 thru 60

technical guide models: yhjr18 thru 60
700691-YTG-A-0512
DESCRIPTION
The 13 SEER Series unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with accessories and documents to serve specific functions.
FEATURES
TECHNICAL GUIDE
LX SERIES
SPLIT-SYSTEM HEAT PUMPS
13 SEER – R-410A – 1 PHASE
1.5 THRU 5 NOMINAL TONS
MODELS: YHJR18 THRU 60
• Small Footprint - The ECM indoor match results in a compact outdoor unit, perfect for applications requiring the minimum footprint possible.
• Quality Condenser Coils - The coil is constructed of copper
tubing and enhanced aluminum fins for increased performance.
• Coil Protection - Coils are protected from damage by a slotted, stamped steel coil guard.
• Protected Compressor - Compressors are protected internally by a high pressure relief valve and a temperature sensor, and externally by the system high pressure switch. A
factory installed liquid line filter-drier further protects the compressor against moisture and debris.
• Environmentally Friendly Refrigerant - The next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish - The cabinet is made of G90-equivalent prepainted steel, with special primer formulas and matte champagne texture to insure less fading when exposed to sunlight. The coated steel wire fan guard and pre-treated,
galvanized steel chassis components resist corrosion and
rust creep.
• Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections. The
unit is factory charged for a 15-foot lineset. The small base
dimension means less space is required on the ground or
roof.
• Top Discharge - Warm air from the top mounted fan is blown
up, away from the structure and any landscaping. This allows
compact location on multi-unit applications.
• Low Operating Sound Level - The upward air flow carries
the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the condenser coil muffle the normal fan motor and compressor operating sounds.
®
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.upgnet.com and www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 5-Years limited parts warranty.
Standard 10-Years limited compressor warranty.
Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
• Low Maintenance - Long life, permanently lubricated motorbearings need no annual servicing.
• Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls make
for easy servicing of the unit.
• Secured Service Valves - Secured, re-usable service
valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
• Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
700691-YTG-A-0512
Physical and Electrical Data
YHJR18
S41S3
MODEL
YHJR24
S41S4
YHJR30
S41S4
Unit Supply Voltage
YHJR36
S41S4
YHJR42
S41S4
YHJR48
S41S14
YHJR60
S41S4
208-230V, 1 60Hz
Normal Voltage Range
1
187 to 252
Minimum Circuit Ampacity
Max. Overcurrent Device Amps
Min. Overcurrent Device Amps
2
3
Compressor Type
11.2
12.4
14.9
19.9
21.1
23.0
37.4
15
20
25
30
35
40
60
15
15
15
20
25
25
40
Scroll
Recip
Recip
Recip
Recip
Recip
Recip
Rated Load
8.3
9.3
11.3
14.7
15.7
17.2
28.8
Locked Rotor
43.0
43.0
54.0
74.0
88.0
84.0
150.0
Crankcase Heater
Yes
Yes
Yes
Yes
Yes
Yes
No
Factory External Discharge Muffler
No
No
Yes
Yes
Yes
Yes
Factory External Check Valve
No
No
No
No
No
Combined
DM/CV
Yes*
Yes*
Yes*
Yes*
Yes*
No
No
0.8
0.8
0.8
1.5
1.5
1.5
1.5
18
18
22
24
24
24
24
Compressor Amps
HS Kit Required with TXV
Fan Motor Amps
4
Rated Load
Fan Diameter Inches
Rated HP
Fan Motor
1/8
1/8
1/8
1/4
1/4
1/4
1/4
Nominal RPM
1075
1075
1075
850
850
850
850
Nominal CFM
2000
2000
2500
3500
3500
3900
3550
9.3
9.3
12.8
15.7
15.7
23.6
23.6
Face Area Sq. Ft.
Coil
No
Rows Deep
1
1
1
1
1
1
2
Fin / Inches
18
18
18
22
22
22
18
Liquid Line Set OD (Field Installed)
3/8
3/8
3/8
3/8
3/8
3/8
3/8
Vapor Line Set OD (Field Installed)
3/4
3/4
3/4
3/4
7/8
7/8
7/8
5-6
4 - 15
7-9
6-7
7-7
10 - 0
13 - 13
Charge Per Foot, Oz.
0.62
0.62
0.62
0.62
0.67
0.67
0.67
Operating Weight Lbs.
145
145
176
193
198
248
290
Unit Charge (Lbs. - Oz.)
5
* These models are shipped with a Hard Start Kit installed at the factory.
1.
2.
3.
4.
5.
Rated in accordance with ANSI/AHRI Standard 110-2002, utilization range “A”.
Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract
the amount of refrigerant, using the difference in length multiplied by the per foot value.
All dimensions are in inches. They are subject to change without notice.
Certified dimensions will be provided upon request.
C
.
Unit
Model
A
B
2
Dimensions
(Inches)
A1
B
Refrigerant Connection
Service Valve Size
C
18
28
23-1/2
23-1/2
24
28
23-1/2
23-1/2
30
28
29
29
36
28
34
34
42
28
34
34
48
40
34
34
60
40
34
34
Liquid
Vapor
3/4”
3/8”
7/8”
1. Overall height from bottom of base pan to top of fan guard.
Johnson Controls Unitary Products
700691-YTG-A-0512
System Charge for Various Matched Systems
Outdoor Unit
YHJR18S41S3 YHJR24S41S4 YHJR30S41S4
YHJR36S41S4
YHJR42S41S4 YHJR48S41S4 YHJR60S41S4
Required Orifice or TXV1,2 .049, .051 / 4F1 .055, .058 / 4G1 .063, .065 / 4G1 .069, .071 / 4H1 .073, .075 / 4J1
Indoor Unit 3,4,5
.078 / 4K1
4K1
–
Additional Charge, Oz
AHE18B
.051 / TXV + 9
–
–
–
–
–
AHE22B
–
.058 / TXV + 0
–
–
–
–
–
AHE24B
–
TXV + 9
–
–
–
–
–
AHE30B
–
TXV + 9
.065 / TXV + 0
–
AHE34C
–
–
.065 / TXV + 0 .071 + 0 / TXV + 6
–
–
–
–
–
–
AHE36C
–
–
.063 / TXV + 7
.069 / TXV + 15
–
–
–
AHE42D
–
–
–
–
.073 / TXV + 0
–
–
AHE48D
–
–
–
–
.075 / TXV + 20 .078 / TXV + 0
AHE60D
–
–
–
–
AV*24
.051 / TXV + 2
.055 / TXV + 9
–
–
–
–
–
AV*36
–
–
.063 / TXV + 7
.069 / TXV + 15
–
–
–
AV*48
–
–
–
–
.075 / TXV + 20 .078 / TXV + 21
AV*60
–
–
–
–
.075 / TXV + 20 .078 / TXV + 21
FC/MC/PC/UC18
.051 / TXV + 0
–
–
–
–
–
–
FC/MC/PC/UC24
.049 / TXV + 18 .055 / TXV + 9
–
–
–
–
–
FC/MC/PC/UC30
.049 / TXV + 18 .055 / TXV + 9
–
–
–
–
–
–
–
–
–
–
.078 / TXV + 29
–
TXV + 0
–
–
FC/MC/PC/UC35
–
–
.065 / TXV + 0
.069 / TXV + 11
FC/MC/PC/UC43
–
–
.063 / TXV + 7
.069 / TXV + 15
–
–
FC/MC/PC/UC48
–
–
–
–
.075 / TXV + 17
–
FC/MC/PC/UC60
–
–
–
–
.075 / TXV + 20 .078 / TXV + 21
FC/PC62
–
–
–
–
–
.078 / TXV + 29
TXV + 0
FC64
–
–
–
–
–
–
TXV + 8
–
–
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1.
2.
3.
4.
5.
For applications requiring a TXV use S1-1TVM*** series kit.
Approved orifice(s) shipped with outdoor unit.
Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches.
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing.
2. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit +
charge adder for line set.
Johnson Controls Unitary Products
3
700691-YTG-A-0512
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
YHJR18S41S3
YHJR24S41S4
YHJR30S41S4
YHJR36S41S4
YHJR42S41S4
YHJR48S41S4
AIR HANDLER
MODEL
AHE18B
AV*24
MV12B
MV12B
MV12B
MX12B
MX12B
MX12B
AHE22B
AHE24B
AHE30B
AV*24
MV12B
MV12B
MX12B
MX12B
AHE30B
AHE34C
AHE36C
AV*36
MV12B
MV16C
MV16C
MX12B
MX12B
AHE34C
AHE36C
AV*36
MV16C
MV16C
MX12B
MX12B
MX16C
AHE42D
AHE48D
AV*48
AV*60
MV16C
MV16C
MV20D
MV20D
MX16C
MX16C
MX20D
MX20D
AHE48D
AHE60D
AV*48
AV*60
MV20D
MV20D
MX20D
MX20D
WIDTH
COIL
MODEL1
RATED
CFM
13 SEER HP WITH AIR HANDLERS
17.5
–
610
17.5
–
595
17.5
FC/MC18B
655
17.5
FC/MC24B
655
17.5
FC/MC30B
655
17.5
FC/MC18B
585
17.5
FC/MC24B
645
17.5
FC/MC30B
645
17.5
–
805
17.5
–
820
17.5
–
820
17.5
–
815
17.5
FC/MC24B
770
17.5
FC/MC30B
770
17.5
FC/MC24B
780
17.5
FC/MC30B
780
17.5
–
1030
21.0
–
985
21.0
–
1000
21.0
–
1005
17.5
FC/MC43B
1050
21.0
FC/MC35C
1095
21.0
FC/MC43C
1095
17.5
FC/MC35B
1085
17.5
FC/MC43B
1095
21.0
–
1215
21.0
–
1190
21.0
–
1230
21.0
FC/MC35C
1215
21.0
FC/MC43C
1215
17.5
FC/MC35B
1215
17.5
FC/MC43B
1220
21.0
FC/MC43C
1140
24.5
–
1375
24.5
–
1385
24.5
–
1440
24.5
–
1400
21.0
FC/MC48C
1400
21.0
FC60C
1400
24.5
FC/MC48D
1430
24.5
FC/MC60D
1430
21.0
FC/MC48C
1390
21.0
FC60C
1420
24.5
FC/MC48D
1415
24.5
FC/MC60D
1470
24.5
–
1605
24.5
–
1565
24.5
–
1605
24.5
–
1600
24.5
FC/MC60D
1595
24.5
FC/MC62D
1595
24.5
FC/MC60D
1585
24.5
FC/MC62D
1605
COOLING
NET MBH
TOTAL
SENS.
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
22.8
22.6
22.6
23.6
23.0
23.0
24.0
24.0
28.8
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
34.2
35.6
35.0
34.2
35.0
34.8
35.6
35.4
39.0
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
45.5
47.5
47.0
47.0
47.0
47.5
47.5
48.0
12.9
13.5
13.5
13.5
13.5
13.0
13.2
13.2
18.4
16.3
16.3
17.9
17.9
17.5
18.0
17.5
17.6
17.6
22.2
22.8
21.7
21.7
23.4
21.7
21.7
24.0
25.0
26.4
25.0
25.8
25.6
25.6
26.4
26.0
26.0
26.0
26.0
31.0
26.0
31.6
26.0
31.0
26.0
31.6
26.0
31.6
31.6
31.1
31.6
31.2
31.6
31.2
31.8
SEER
EER
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
10.90
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
For Notes See Page 5.
4
Johnson Controls Unitary Products
700691-YTG-A-0512
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
YHJR60S41S4
AIR HANDLER
MODEL
WIDTH
COIL
MODEL1
COOLING
NET MBH
TOTAL
SENS.
RATED
CFM
13 SEER HP WITH AIR HANDLERS
24.5
–
1835
24.5
FC/MC62D
1855
24.5
FC64D
1855
24.5
FC/MC62D
1795
24.5
FC64D
1795
AHE60D
MV20D
MV20D
MX20D
MX20D
55.0
55.5
56.0
55.0
56.0
40.7
41.1
41.4
40.7
41.4
SEER
EER
14.00
13.75
14.00
14.00
14.50
11.85
11.50
12.00
12.00
12.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80 °F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in
watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
COIL
UNIT
MODEL
MODEL
COOLING
CFM RANGE
(MIN.-MAX.)
WIDTH
NET MBH
RATED
CFM
TOTAL
SEER1
SENS.
EER
13 SEER HP COIL ONLY RATINGS
YHJR60S41S4
FC/MC62
24.5
1600 - 2000
1800
55.0
40.7
13.00
11.00
FC64
24.5
1600 - 2000
1800
56.0
41.4
13.00
11.00
1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
COOLING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
FURNACE
MODEL
WIDTH
COIL
MODEL1
COOLING
RATED
CFM
Net MBH
TOTAL
SENS.
SEER
EER
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
YHJR18S41S3
T*(8,L)V*A12
14.5
FC/MC/PC/UC24A
600
18.0
13.5
13.00
11.00
T*(8,L)V*A12
14.5
FC/MC/PC/UC30A
600
18.0
13.5
13.00
11.00
T*(8,L)V*B12
17.5
FC/MC/PC/UC24B
580
18.0
13.5
13.00
11.00
T*(8,L)V*B12
17.5
FC/MC/PC/UC30B
580
18.0
13.5
13.00
11.00
T*(8,L)X*A12
14.5
FC/MC/PC/UC24A
600
18.0
13.5
13.00
11.00
T*(8,L)X*A12
14.5
FC/MC/PC/UC30A
600
18.0
13.5
13.00
11.00
T*(8,L)X*B12
17.5
FC/MC/PC/UC24B
580
18.0
13.5
13.00
11.00
T*(8,L)X*B12
17.5
FC/MC/PC/UC30B
580
18.0
13.5
13.00
11.00
T*9V*A10
17.5
FC/MC/PC/UC24B
575
18.0
13.5
13.00
11.00
T*9(C,V)*B12
17.5
FC/MC/PC/UC24B
600
18.0
13.5
13.00
11.00
T*9(C,V)*B12
17.5
FC/MC/PC/UC30B
600
18.0
13.5
13.00
11.00
T*9X*A10
17.5
FC/MC/PC/UC24B
595
18.0
13.5
13.05
11.00
T*9X*B12
17.5
FC/MC/PC/UC24B
600
18.0
13.5
13.00
11.00
T*9X*B12
17.5
FC/MC/PC/UC30B
600
18.0
13.5
13.00
11.00
Y*(8,L)C*A12
14.5
FC/MC/PC/UC24A
600
18.0
13.5
13.00
11.00
Y*(8,L)C*A12
14.5
FC/MC/PC/UC30A
600
18.0
13.5
13.00
11.00
Y*(8,L)C*B12
17.5
FC/MC/PC/UC24B
580
18.0
13.5
13.00
11.00
Y*(8,L)C*B12
17.5
FC/MC/PC/UC30B
580
18.0
13.5
13.00
11.00
Y*9C*B12
17.5
FC/MC/PC/UC24B
600
18.0
13.5
13.00
11.00
Y*9C*B12
17.5
FC/MC/PC/UC30B
600
18.0
13.5
13.00
11.00
For Notes See Page 9.
Johnson Controls Unitary Products
5
700691-YTG-A-0512
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
WIDTH
COIL
MODEL1
COOLING
RATED
CFM
Net MBH
TOTAL
SENS.
SEER
EER
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
YHJR24S41S4
YHJR30S41S4
T*(8,L)V*A12
14.5
FC/MC/PC24A
815
23.6
18.0
13.00
11.00
T*(8,L)V*A12
14.5
FC/MC/PC30A
815
23.6
18.0
13.00
11.00
T*(8,L)V*A12
14.5
UC24A
815
23.6
18.0
13.00
11.00
T*(8,L)V*A12
14.5
UC30A
815
23.6
18.0
13.00
11.00
T*(8,L)V*B12
17.5
FC/MC/PC24B
775
23.6
18.0
13.00
11.00
T*(8,L)V*B12
17.5
FC/MC/PC30B
775
23.6
18.0
13.00
11.00
T*(8,L)V*B12
17.5
UC24B
775
23.6
18.0
13.00
11.00
T*(8,L)V*B12
17.5
UC30B
775
23.6
18.0
13.00
11.00
T*(8,L)X*A12
14.5
FC/MC/PC24A
815
23.6
18.0
13.00
11.00
T*(8,L)X*A12
14.5
FC/MC/PC30A
815
23.6
18.0
13.00
11.00
T*(8,L)X*A12
14.5
UC24A
815
23.6
18.0
13.00
11.00
T*(8,L)X*A12
14.5
UC30A
815
23.6
18.0
13.00
11.00
T*(8,L)X*B12
17.5
FC/MC/PC24B
775
23.6
18.0
13.00
11.00
T*(8,L)X*B12
17.5
FC/MC/PC30B
775
23.6
18.0
13.00
11.00
T*(8,L)X*B12
17.5
UC24B
775
23.6
18.0
13.00
11.00
T*(8,L)X*B12
17.5
UC30B
775
23.6
18.0
13.00
11.00
T*9(C,V)*B12
17.5
FC/MC/PC24B
760
23.6
18.0
13.00
11.00
T*9(C,V)*B12
17.5
FC/MC/PC30B
760
23.6
18.0
13.00
11.00
T*9(C,V)*B12
17.5
UC24B
760
23.6
18.0
13.00
11.00
T*9(C,V)*B12
17.5
UC30B
760
23.6
18.0
13.00
11.00
T*9X*B12
17.5
FC/MC/PC24B
760
23.6
18.0
13.00
11.00
T*9X*B12
17.5
FC/MC/PC30B
760
23.6
18.0
13.00
11.00
T*9X*B12
17.5
UC24B
760
23.6
18.0
13.00
11.00
T*9X*B12
17.5
UC30B
760
23.6
18.0
13.00
11.00
Y*(8,L)C*A12
14.5
FC/MC/PC24A
815
23.6
18.0
13.00
11.00
Y*(8,L)C*A12
14.5
FC/MC/PC30A
815
23.6
18.0
13.00
11.00
Y*(8,L)C*A12
14.5
UC24A
815
23.6
18.0
13.00
11.00
Y*(8,L)C*A12
14.5
UC30A
815
23.6
18.0
13.00
11.00
Y*(8,L)C*B12
17.5
FC/MC/PC24B
775
23.6
18.0
13.00
11.00
Y*(8,L)C*B12
17.5
FC/MC/PC30B
775
23.6
18.0
13.00
11.00
Y*(8,L)C*B12
17.5
UC24B
775
23.6
18.0
13.00
11.00
Y*(8,L)C*B12
17.5
UC30B
775
23.6
18.0
13.00
11.00
Y*9C*B12
17.5
FC/MC/PC24B
760
23.6
18.0
13.00
11.00
Y*9C*B12
17.5
FC/MC/PC30B
760
23.6
18.0
13.00
11.00
Y*9C*B12
17.5
UC24B
760
23.6
18.0
13.00
11.00
Y*9C*B12
17.5
UC30B
760
23.6
18.0
13.00
11.00
T*(8,L)V*B12
17.5
FC/MC/PC43B
960
30.0
21.7
13.00
11.00
T*(8,L)V*C16
21.0
FC/MC/PC43C
1000
30.0
21.7
13.00
11.00
T*(8,L)X*B12
17.5
FC/MC/PC43B
960
30.0
21.7
13.00
11.00
T*(8,L)X*C16
21.0
FC/MC/PC43C
1000
30.0
21.7
13.00
11.00
T*9(C,V)*B12
17.5
FC/MC/PC43B
1000
30.0
21.7
13.00
11.00
T*9(C,V)*C16
21.0
FC/MC/PC43C
995
30.0
21.7
13.00
11.00
T*9X*B12
17.5
FC/MC/PC43B
1000
30.0
21.7
13.00
11.00
T*9X*C16
21.0
FC/MC/PC43C
995
30.0
21.7
13.00
11.00
Y*(8,L)C*B12
17.5
FC/MC/PC43B
960
30.0
21.7
13.00
11.00
Y*(8,L)C*C16
21.0
FC/MC/PC43C
1000
30.0
21.7
13.00
11.00
Y*9C*B12
17.5
FC/MC/PC43B
1000
30.0
21.7
13.00
11.00
Y*9C*C16
21.0
FC/MC/PC43C
995
30.0
21.7
13.00
11.00
For Notes See Page 9.
6
Johnson Controls Unitary Products
700691-YTG-A-0512
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
WIDTH
COIL
MODEL1
COOLING
RATED
CFM
Net MBH
TOTAL
SENS.
SEER
EER
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
YHJR36S41S4
YHJR42S41S4
T*(8,L)V*C16
21.0
FC/MC/PC43C
1200
34.2
25.0
13.00
11.00
T*(8,L)V*C20
21.0
FC/MC/PC43C
1270
34.2
25.0
13.00
11.00
T*(8,L)X*C16
21.0
FC/MC/PC43C
1200
34.2
25.0
13.00
11.00
T*(8,L)X*C20
21.0
FC/MC/PC43C
1270
34.2
25.0
13.00
11.00
T*9(C,V)*C16
21.0
FC/MC/PC43C
1175
34.2
25.0
13.00
11.00
T*9(C,V)*C20
21.0
FC/MC/PC43C
1270
34.2
25.0
13.00
11.00
T*9X*C16
21.0
FC/MC/PC43C
1175
34.2
25.0
13.00
11.00
T*9X*C20
21.0
FC/MC/PC43C
1270
34.2
25.0
13.00
11.00
Y*(8,L)C*C16
21.0
FC/MC/PC43C
1200
34.2
25.0
13.00
11.00
Y*(8,L)C*C20
21.0
FC/MC/PC43C
1270
34.2
25.0
13.00
11.00
Y*9C*C16
21.0
FC/MC/PC43C
1175
34.2
25.0
13.00
11.00
Y*9C*C20
21.0
FC/MC/PC43C
1270
34.2
25.0
13.00
11.00
T*(8,L)V*C16
21.0
FC/MC/PC48C
1430
39.5
31.6
13.00
11.00
11.00
T*(8,L)V*C16
21.0
FC/PC60C+TXV
1430
39.5
30.4
13.00
T*(8,L)V*C16
21.0
UC48C
1430
39.5
31.6
13.00
11.00
T*(8,L)V*C16
21.0
UC60C
1430
39.5
30.4
13.00
11.00
T*(8,L)V*C20
21.0
FC/MC/PC48C
1370
39.5
31.6
13.00
11.00
T*(8,L)V*C20
21.0
FC/PC60C+TXV
1370
39.5
30.4
13.00
11.00
T*(8,L)V*C20
21.0
UC48C
1370
39.5
31.6
13.00
11.00
T*(8,L)V*C20
21.0
UC60C
1370
39.5
30.4
13.00
11.00
T*(8,L)V*C20
21.0
UC60C+TXV
1370
39.5
30.4
13.00
11.00
T*(8,L)X*C16
21.0
FC/MC/PC48C
1430
39.5
31.6
13.00
11.00
T*(8,L)X*C16
21.0
FC/PC60C
1430
39.5
30.4
13.00
11.00
T*(8,L)X*C16
21.0
FC/PC60C+TXV
1430
39.5
30.4
13.00
11.00
T*(8,L)X*C16
21.0
UC48C
1430
39.5
31.6
13.00
11.00
T*(8,L)X*C16
21.0
UC60C
1430
39.5
30.4
13.00
11.00
T*(8,L)X*C16
21.0
UC60C+TXV
1430
39.5
30.4
13.00
11.00
T*(8,L)X*C20
21.0
FC/MC/PC48C
1370
39.5
31.6
13.00
11.00
T*(8,L)X*C20
21.0
FC/PC60C
1370
39.5
30.4
13.00
11.00
T*(8,L)X*C20
21.0
FC/PC60C+TXV
1370
39.5
30.4
13.00
11.00
T*(8,L)X*C20
21.0
UC48C
1370
39.5
31.6
13.00
11.00
T*(8,L)X*C20
21.0
UC60C
1370
39.5
30.4
13.00
11.00
11.00
T*(8,L)X*C20
21.0
UC60C+TXV
1370
39.5
30.4
13.00
T*9(C,V)*C16
21.0
FC/MC/PC48C
1385
39.5
31.6
13.00
11.00
T*9(C,V)*C16
21.0
FC/PC60C+TXV
1385
39.5
30.4
13.00
11.00
T*9(C,V)*C16
21.0
UC48C
1385
39.5
31.6
13.00
11.00
T*9(C,V)*C16
21.0
UC60C
1385
39.5
30.4
13.00
11.00
T*9(C,V)*C20
21.0
FC/MC/PC48C
1445
39.5
31.6
13.00
11.00
T*9(C,V)*C20
21.0
FC/PC60C
1445
39.5
30.4
13.00
11.00
T*9(C,V)*C20
21.0
FC/PC60C+TXV
1445
39.5
30.4
13.00
11.00
T*9(C,V)*C20
21.0
UC48C
1445
39.5
31.6
13.00
11.00
T*9(C,V)*C20
21.0
UC60C
1445
39.5
30.4
13.00
11.00
T*9(C,V)*C20
21.0
UC60C+TXV
1445
39.5
30.4
13.00
11.00
T*9(C,V)*D20
24.5
FC/MC/PC48D
1435
39.5
31.6
13.00
11.00
T*9(C,V)*D20
24.5
FC/MC/PC60D
1435
39.5
30.4
13.00
11.00
T*9(C,V)*D20
24.5
FC/MC/PC60D+TXV
1435
39.5
30.4
13.00
11.00
T*9(C,V)*D20
24.5
UC48D
1435
39.5
31.6
13.00
11.00
T*9(C,V)*D20
24.5
UC60D
1435
39.5
30.4
13.00
11.00
T*9(C,V)*D20
24.5
UC60D+TXV
1435
39.5
30.4
13.00
11.00
T*9X*C16
21.0
FC/MC/PC48C
1385
39.5
31.6
13.00
11.00
For Notes See Page 9.
Johnson Controls Unitary Products
7
700691-YTG-A-0512
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
WIDTH
COIL
MODEL1
COOLING
RATED
CFM
Net MBH
TOTAL
SENS.
SEER
EER
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
YHJR42S41S4
YHJR48S41S4
T*9X*C16
21.0
FC/PC60C
1385
39.5
30.4
13.00
11.00
T*9X*C16
21.0
FC/PC60C+TXV
1385
39.5
30.4
13.00
11.00
T*9X*C16
21.0
UC48C
1385
39.5
31.6
13.00
11.00
T*9X*C16
21.0
UC60C
1385
39.5
30.4
13.00
11.00
T*9X*C16
21.0
UC60C+TXV
1385
39.5
30.4
13.00
11.00
T*9X*C20
21.0
FC/MC/PC48C
1445
39.5
31.6
13.00
11.00
T*9X*C20
21.0
FC/PC60C
1445
39.5
30.4
13.00
11.00
T*9X*C20
21.0
FC/PC60C+TXV
1445
39.5
30.4
13.00
11.00
T*9X*C20
21.0
UC48C
1445
39.5
31.6
13.00
11.00
T*9X*C20
21.0
UC60C
1445
39.5
30.4
13.00
11.00
T*9X*C20
21.0
UC60C+TXV
1445
39.5
30.4
13.00
11.00
T*9X*D20
24.5
FC/MC/PC48D
1435
39.5
31.6
13.00
11.00
T*9X*D20
24.5
FC/MC/PC60D
1435
39.5
30.4
13.00
11.00
T*9X*D20
24.5
FC/MC/PC60D+TXV
1435
39.5
30.4
13.00
11.00
T*9X*D20
24.5
UC48D
1435
39.5
31.6
13.00
11.00
T*9X*D20
24.5
UC60D
1435
39.5
30.4
13.00
11.00
11.00
T*9X*D20
24.5
UC60D+TXV
1435
39.5
30.4
13.00
Y*(8,L)C*C16
21.0
FC/MC/PC48C
1430
39.5
31.6
13.00
11.00
Y*(8,L)C*C16
21.0
FC/PC60C+TXV
1430
39.5
30.4
13.00
11.00
Y*(8,L)C*C16
21.0
UC48C
1430
39.5
31.6
13.00
11.00
Y*(8,L)C*C16
21.0
UC60C
1430
39.5
30.4
13.00
11.00
Y*(8,L)C*C20
21.0
FC/MC/PC48C
1370
39.5
31.6
13.00
11.00
Y*(8,L)C*C20
21.0
FC/PC60C+TXV
1370
39.5
30.4
13.00
11.00
Y*(8,L)C*C20
21.0
UC48C
1370
39.5
31.6
13.00
11.00
Y*(8,L)C*C20
21.0
UC60C
1370
39.5
30.4
13.00
11.00
11.00
Y*(8,L)C*C20
21.0
UC60C+TXV
1370
39.5
30.4
13.00
Y*9C*C16
21.0
FC/MC/PC48C
1385
39.5
31.6
13.00
11.00
Y*9C*C16
21.0
FC/PC60C+TXV
1385
39.5
30.4
13.00
11.00
Y*9C*C16
21.0
UC48C
1385
39.5
31.6
13.00
11.00
Y*9C*C16
21.0
UC60C
1385
39.5
30.4
13.00
11.00
Y*9C*C20
21.0
FC/MC/PC48C
1445
39.5
31.6
13.00
11.00
Y*9C*C20
21.0
FC/PC60C
1445
39.5
30.4
13.00
11.00
11.00
Y*9C*C20
21.0
FC/PC60C+TXV
1445
39.5
30.4
13.00
Y*9C*C20
21.0
UC48C
1445
39.5
31.6
13.00
11.00
Y*9C*C20
21.0
UC60C
1445
39.5
30.4
13.00
11.00
11.00
Y*9C*C20
21.0
UC60C+TXV
1445
39.5
30.4
13.00
Y*9C*D20
24.5
FC/MC/PC48D
1435
39.5
31.6
13.00
11.00
Y*9C*D20
24.5
FC/MC/PC60D
1435
39.5
30.4
13.00
11.00
11.00
Y*9C*D20
24.5
FC/MC/PC60D+TXV
1435
39.5
30.4
13.00
Y*9C*D20
24.5
UC48D
1435
39.5
31.6
13.00
11.00
Y*9C*D20
24.5
UC60D
1435
39.5
30.4
13.00
11.00
Y*9C*D20
24.5
UC60D+TXV
1435
39.5
30.4
13.00
11.00
T*(8,L)V*C20
24.5
FC/MC62D
1670
47.0
35.3
13.00
11.00
T*(8,L)X*C20
24.5
FC/MC62D
1670
47.0
35.3
13.00
11.00
T*9(C,V)*C20
24.5
FC/MC62D
1605
47.0
35.3
13.00
11.00
T*9(C,V)*D20
24.5
FC/MC62D
1595
47.0
35.3
13.00
11.00
T*9X*C20
24.5
FC/MC62D
1605
47.0
35.3
13.00
11.00
T*9X*D20
24.5
FC/MC62D
1595
47.0
35.3
13.00
11.00
Y*(8,L)C*C20
24.5
FC/MC62D
1670
47.0
35.3
13.00
11.00
Y*9C*C20
24.5
FC/MC62D
1605
47.0
35.3
13.00
11.00
Y*9C*D20
24.5
FC/MC62D
1595
47.0
35.3
13.00
11.00
For Notes See Page 9.
8
Johnson Controls Unitary Products
700691-YTG-A-0512
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL1
WIDTH
COOLING
RATED
CFM
Net MBH
TOTAL
SENS.
SEER
EER
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
YHJR60S41S4
T*(8,L)V*C20
24.5
FC/MC62D
1615
54.5
40.3
14.00
12.00
T*(8,L)V*C20
24.5
FC64D
1615
55.5
41.1
14.00
12.00
T*(8,L)X*C20
24.5
FC/MC62D
1665
55.0
40.7
14.00
12.00
T*(8,L)X*C20
24.5
FC64D
1665
56.0
41.4
14.50
12.00
T*9(C,V)*C20
24.5
FC/MC62D
1655
54.5
40.3
13.50
11.50
T*9(C,V)*C20
24.5
FC64D
1655
55.5
41.1
14.00
11.50
T*9(C,V)*D20
24.5
FC/MC62D
1630
54.5
40.3
13.75
11.50
T*9(C,V)*D20
24.5
FC64D
1630
55.5
41.1
14.00
11.50
T*9X*C20
24.5
FC/MC62D
1595
55.0
40.7
14.00
12.00
T*9X*C20
24.5
FC64D
1595
56.0
41.4
14.50
12.00
T*9X*D20
24.5
FC/MC62D
1645
55.0
40.7
14.00
12.00
T*9X*D20
24.5
FC64D
1645
56.0
41.4
14.50
12.00
Y*(8,L)C*C20
24.5
FC/MC62D
1615
54.5
40.3
14.00
12.00
Y*(8,L)C*C20
24.5
FC64D
1615
55.5
41.1
14.00
12.00
Y*9C*C20
24.5
FC/MC62D
1655
54.5
40.3
13.50
11.50
Y*9C*C20
24.5
FC64D
1655
55.5
41.1
14.00
11.50
Y*9C*D20
24.5
FC/MC62D
1630
54.5
40.3
13.75
11.50
Y*9C*D20
24.5
FC64D
1630
55.5
41.1
14.00
11.50
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
HEATING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR
HANDLER
HEATING2
COIL1
MODEL
47F
MBH
COP
17F
HSPF
KW
MBH
COP
KW
STD
13 SEER HP WITH AIR HANDLERS
YHJR18S41S3
YHJR24S41S4
AHE18B
–
17.8
3.40
1.53
9.6
2.32
1.21
7.70
AV*24
–
17.6
3.36
1.43
9.6
2.28
1.14
7.70
MV12B
FC/MC18B
17.6
3.36
1.43
9.6
2.28
1.14
7.70
MV12B
FC/MC24B
17.6
3.36
1.43
9.6
2.28
1.14
7.70
MV12B
FC/MC30B
17.6
3.36
1.43
9.6
2.28
1.14
7.70
MX12B
FC/MC18B
17.7
3.44
1.51
9.5
2.34
1.19
7.70
MX12B
FC/MC24B
18.0
3.60
1.46
10.1
2.46
1.20
7.70
MX12B
FC/MC30B
18.0
3.60
1.46
10.1
2.46
1.20
7.70
AHE22B
–
22.0
3.60
1.79
12.2
2.46
1.45
7.70
AHE24B
–
22.0
3.60
1.79
12.2
2.47
1.45
7.70
AHE30B
–
21.4
3.70
1.69
11.7
2.44
1.40
7.70
AV*24
–
23.0
3.74
2.05
13.4
2.62
1.56
7.70
MV12B
FC/MC24B
23.0
3.74
2.05
13.4
2.62
1.56
7.70
MV12B
FC/MC30B
23.0
3.74
2.05
13.4
2.62
1.56
7.70
MX12B
FC/MC24B
22.8
3.86
2.05
12.9
2.72
1.56
7.70
MX12B
FC/MC30B
22.8
3.86
2.05
12.9
2.72
1.56
7.70
For Notes See Page 10.
Johnson Controls Unitary Products
9
700691-YTG-A-0512
HEATING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR
HANDLER
HEATING2
COIL1
MODEL
47F
MBH
COP
17F
KW
MBH
COP
HSPF
KW
STD
13 SEER HP WITH AIR HANDLERS
YHJR30S41S4
YHJR36S41S4
YHJR42S41S4
YHJR48S41S4
YHJR60S41S4
AHE30B
–
28.6
3.64
2.30
12.2
2.52
1.42
7.70
AHE34C
–
27.8
3.62
2.61
14.5
2.50
2.14
7.70
AHE36C
–
27.8
3.82
2.53
14.6
2.62
2.01
7.70
AV*36
–
27.8
3.58
2.61
14.0
2.46
2.14
7.70
MV12B
FC/MC43B
28.0
3.70
2.53
14.0
2.46
2.01
7.70
MV16C
FC/MC35C
27.8
3.58
2.53
14.0
2.46
2.01
7.70
MV16C
FC/MC43C
27.8
3.70
2.53
14.0
2.46
2.01
7.70
MX12B
FC/MC35B
27.8
3.66
2.53
14.5
2.52
2.01
7.70
MX12B
FC/MC43B
27.8
3.80
2.53
14.8
2.58
2.01
7.70
AHE34C
–
32.2
3.64
2.59
19.3
2.60
2.17
7.70
AHE36C
–
32.6
3.68
2.67
18.3
2.50
2.20
7.70
AV*36
–
32.0
3.50
2.56
17.9
2.38
2.07
7.70
MV16C
FC/MC35C
33.0
3.70
2.56
17.9
2.38
2.07
7.70
MV16C
FC/MC43C
32.6
3.70
2.67
17.9
2.38
2.20
7.70
MX12B
FC/MC35B
32.2
3.52
2.67
17.7
2.36
2.20
7.70
MX12B
FC/MC43B
32.6
3.62
2.68
18.3
2.44
2.20
7.70
MX16C
FC/MC43C
32.2
3.68
2.56
17.8
2.52
2.07
7.70
AHE42D
–
36.0
3.66
2.88
21.6
2.65
2.39
7.70
AHE48D
–
38.5
3.96
2.61
23.40
2.8
2.13
7.70
AV*48
–
38.5
3.96
2.61
23.40
2.8
2.13
7.70
AV*60
–
38.5
3.96
2.53
23.40
2.8
2.14
7.70
MV16C
FC/MC48C
38.5
3.96
2.61
23.4
2.76
2.14
7.70
MV16C
FC60C
38.5
4.00
2.53
23.40
2.8
2.14
7.70
MV20D
FC/MC48D
38.5
3.96
2.61
23.4
2.76
2.14
7.70
MV20D
FC/MC60D
38.5
4.00
2.61
23.40
2.8
2.12
7.70
MX16C
FC/MC48C
38.5
3.88
2.53
22.8
2.78
2.13
7.70
MX16C
FC60C
38.5
4.02
2.61
23.20
2.8
2.12
7.70
MX20D
FC/MC48D
38.5
3.86
2.53
22.8
2.76
2.12
7.70
MX20D
FC/MC60D
38.5
4.06
2.61
23.20
2.8
2.13
7.70
AHE48D
–
45.0
3.72
3.54
26.5
2.70
2.87
7.70
AHE60D
–
45.5
4.00
3.12
26.0
2.76
2.76
7.70
AV*48
–
46.0
4.00
3.11
27.0
2.78
2.80
7.70
AV*60
–
46.0
4.00
3.14
27.0
2.78
2.76
7.70
MV20D
FC/MC60D
46.0
4.00
3.10
27.0
2.78
2.80
7.70
7.70
MV20D
FC/MC62D
46.0
4.00
3.13
27.0
2.78
2.80
MX20D
FC/MC60D
46.0
4.14
3.11
26.6
2.86
2.76
7.70
MX20D
FC/MC62D
45.5
4.08
3.12
26.2
2.80
2.76
7.70
AHE60D
–
57.5
3.40
4.95
36.0
2.62
4.02
8.20
MV20D
FC/MC62D
57.0
3.38
4.94
36.2
2.60
4.08
8.20
MV20D
FC64D
57.0
3.44
4.85
36.6
2.64
4.06
8.20
MX20D
FC/MC62D
57.0
3.44
4.85
35.8
2.66
3.94
8.20
MX20D
FC64D
57.5
3.52
4.78
36.0
2.70
3.91
8.20
1. Rated CFM same as for cooling.
2. Heating MBH based on ARI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and
no supplemental electric heat operation.
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input
during the same period.
— = Not Applicable.
MA Modular Air Handlers use Coil Only Ratings.
10
Johnson Controls Unitary Products
700691-YTG-A-0512
HEATING CAPACITY - Upflow, Downflow, and Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT
MODEL
HEATING2
COIL1
MODEL
47F
MBH
17F
COP
KW
HSPF
MBH
COP
KW
STD
13 SEER HP COIL ONLY RATINGS
YHJR60S41S4
FC/MC62
57.0
3.32
5.03
36.6
2.56
4.19
7.70
FC64
57.0
3.40
4.91
36.8
2.60
4.15
7.70
1. Rated CFM same as for cooling.
2. Heating MBH based on ARI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and
no supplemental electric heat operation.
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period.
— = Not Applicable.
MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
HEATING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
FURNACE
MODEL
HEATING2
COIL1
MODEL
MBH
YHJR18S41S3
YHJR24S41S4
47F
COP
KW
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
T*(8,L)V*A12
FC/MC/PC/UC24A
17.6
3.36
1.43
T*(8,L)V*A12
FC/MC/PC/UC30A
17.6
3.36
1.43
T*(8,L)V*B12
FC/MC/PC/UC24B
17.6
3.36
1.43
T*(8,L)V*B12
FC/MC/PC/UC30B
17.6
3.36
1.43
T*(8,L)X*A12
FC/MC/PC/UC24A
17.6
3.36
1.43
T*(8,L)X*A12
FC/MC/PC/UC30A
17.6
3.36
1.43
T*(8,L)X*B12
FC/MC/PC/UC24B
17.6
3.36
1.43
T*(8,L)X*B12
FC/MC/PC/UC30B
17.6
3.36
1.43
T*9V*A10
FC/MC/PC/UC24B
18.0
3.78
1.40
T*9(C,V)*B12
FC/MC/PC/UC24B
17.6
3.36
1.43
T*9(C,V)*B12
FC/MC/PC/UC30B
17.6
3.36
1.43
T*9X*A10
FC/MC/PC/UC24B
18.0
3.78
1.40
T*9X*B12
FC/MC/PC/UC24B
17.6
3.36
1.43
T*9X*B12
FC/MC/PC/UC30B
17.6
3.36
1.43
Y*(8,L)C*A12
FC/MC/PC/UC24A
17.6
3.36
1.43
Y*(8,L)C*A12
FC/MC/PC/UC30A
17.6
3.36
1.43
Y*(8,L)C*B12
FC/MC/PC/UC24B
17.6
3.36
1.43
Y*(8,L)C*B12
FC/MC/PC/UC30B
17.6
3.36
1.43
Y*9C*B12
FC/MC/PC/UC24B
17.6
3.36
1.43
Y*9C*B12
FC/MC/PC/UC30B
17.6
3.36
1.43
T*(8,L)V*A12
FC/MC/PC24A
23.0
3.74
1.66
T*(8,L)V*A12
FC/MC/PC30A
23.0
3.74
1.66
T*(8,L)V*A12
UC24A
23.0
3.74
1.66
T*(8,L)V*A12
UC30A
23.0
3.74
1.66
T*(8,L)V*B12
FC/MC/PC24B
23.0
3.74
1.66
T*(8,L)V*B12
FC/MC/PC30B
23.0
3.74
1.66
T*(8,L)V*B12
UC24B
23.0
3.74
1.66
T*(8,L)V*B12
UC30B
23.0
3.74
1.66
T*(8,L)X*A12
FC/MC/PC24A
23.0
3.74
1.66
T*(8,L)X*A12
FC/MC/PC30A
23.0
3.74
1.66
T*(8,L)X*A12
UC24A
23.0
3.74
1.66
T*(8,L)X*A12
UC30A
23.0
3.74
1.66
T*(8,L)X*B12
FC/MC/PC24B
23.0
3.74
1.66
T*(8,L)X*B12
FC/MC/PC30B
23.0
3.74
1.66
T*(8,L)X*B12
UC24B
23.0
3.74
1.66
T*(8,L)X*B12
UC30B
23.0
3.74
1.66
MBH
17F
COP
KW
HSPF
STD
9.6
9.6
9.6
9.6
9.6
9.6
9.6
9.6
12.4
9.6
9.6
12.4
9.6
9.6
9.6
9.6
9.6
9.6
9.6
9.6
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
2.28
2.28
2.28
2.28
2.28
2.28
2.28
2.28
2.54
2.28
2.28
2.54
2.28
2.28
2.28
2.28
2.28
2.28
2.28
2.28
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
1.14
1.14
1.14
1.14
1.14
1.14
1.14
1.14
1.43
1.14
1.14
1.43
1.14
1.14
1.14
1.14
1.14
1.14
1.14
1.14
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.75
7.70
7.70
7.80
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
For Notes See Page 14.
Johnson Controls Unitary Products
11
700691-YTG-A-0512
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
HEATING2
COIL1
MODEL
MBH
YHJR24S41S4
YHJR30S41S4
YHJR36S41S4
YHJR42S41S4
47F
COP
KW
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
T*9(C,V)*B12
FC/MC/PC24B
23.0
3.74
1.66
T*9(C,V)*B12
FC/MC/PC30B
23.0
3.74
1.66
T*9(C,V)*B12
UC24B
23.0
3.74
1.66
T*9(C,V)*B12
UC30B
23.0
3.74
1.66
T*9X*B12
FC/MC/PC24B
23.0
3.74
1.66
T*9X*B12
FC/MC/PC30B
23.0
3.74
1.66
T*9X*B12
UC24B
23.0
3.74
1.66
T*9X*B12
UC30B
23.0
3.74
1.66
Y*(8,L)C*A12
FC/MC/PC24A
23.0
3.74
1.66
Y*(8,L)C*A12
FC/MC/PC30A
23.0
3.74
1.66
Y*(8,L)C*A12
UC24A
23.0
3.74
1.66
Y*(8,L)C*A12
UC30A
23.0
3.74
1.66
Y*(8,L)C*B12
FC/MC/PC24B
23.0
3.74
1.66
Y*(8,L)C*B12
FC/MC/PC30B
23.0
3.74
1.66
Y*(8,L)C*B12
UC24B
23.0
3.74
1.66
Y*(8,L)C*B12
UC30B
23.0
3.74
1.66
Y*9C*B12
FC/MC/PC24B
23.0
3.74
1.66
Y*9C*B12
FC/MC/PC30B
23.0
3.74
1.66
Y*9C*B12
UC24B
23.0
3.74
1.66
Y*9C*B12
UC30B
23.0
3.74
1.66
T*(8,L)V*B12
FC/MC/PC43B
28.0
3.70
2.02
T*(8,L)V*C16
FC/MC/PC43C
28.0
3.70
2.02
T*(8,L)X*B12
FC/MC/PC43B
28.0
3.70
2.02
T*(8,L)X*C16
FC/MC/PC43C
28.0
3.70
2.02
T*9(C,V)*B12
FC/MC/PC43B
28.0
3.70
2.02
T*9(C,V)*C16
FC/MC/PC43C
28.0
3.70
2.02
T*9X*B12
FC/MC/PC43B
28.0
3.70
2.02
T*9X*C16
FC/MC/PC43C
28.0
3.70
2.02
Y*(8,L)C*B12
FC/MC/PC43B
28.0
3.70
2.02
Y*(8,L)C*C16
FC/MC/PC43C
28.0
3.70
2.02
Y*9C*B12
FC/MC/PC43B
28.0
3.70
2.02
Y*9C*C16
FC/MC/PC43C
28.0
3.70
2.02
T*(8,L)V*C16
FC/MC/PC43C
32.6
3.70
2.53
T*(8,L)V*C20
FC/MC/PC43C
32.6
3.70
2.53
T*(8,L)X*C16
FC/MC/PC43C
32.6
3.70
2.53
T*(8,L)X*C20
FC/MC/PC43C
32.6
3.70
2.53
T*9(C,V)*C16
FC/MC/PC43C
32.6
3.70
2.53
T*9(C,V)*C20
FC/MC/PC43C
32.6
3.70
2.53
T*9X*C16
FC/MC/PC43C
32.6
3.70
2.53
T*9X*C20
FC/MC/PC43C
32.6
3.70
2.53
Y*(8,L)C*C16
FC/MC/PC43C
32.6
3.70
2.53
Y*(8,L)C*C20
FC/MC/PC43C
32.6
3.70
2.53
Y*9C*C16
FC/MC/PC43C
32.6
3.70
2.53
Y*9C*C20
FC/MC/PC43C
32.6
3.70
2.53
T*(8,L)V*C16
FC/MC/PC48C
39.5
3.96
2.64
T*(8,L)V*C16
FC/PC60C+TXV
38.5
4.00
2.82
T*(8,L)V*C16
UC48C
39.5
3.96
2.64
T*(8,L)V*C16
UC60C
38.5
4.00
2.82
T*(8,L)V*C20
FC/MC/PC48C
39.5
3.96
2.64
T*(8,L)V*C20
FC/PC60C+TXV
38.5
4.00
2.82
T*(8,L)V*C20
UC48C
39.5
3.96
2.64
T*(8,L)V*C20
UC60C
38.5
4.00
2.82
T*(8,L)V*C20
UC60C+TXV
38.5
4.00
2.82
MBH
17F
COP
KW
HSPF
STD
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
13.4
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
17.9
17.9
17.9
17.9
17.9
17.9
17.9
17.9
17.9
17.9
17.9
17.9
23.4
23.40
23.4
23.40
23.4
23.40
23.4
23.40
23.40
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.62
2.46
2.46
2.46
2.46
2.46
2.46
2.46
2.46
2.46
2.46
2.46
2.46
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.38
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.56
1.56
1.56
1.56
1.56
1.56
1.56
1.56
1.56
1.56
1.56
1.56
2.01
2.01
2.01
2.01
2.01
2.01
2.01
2.01
2.01
2.01
2.01
2.01
2.17
2.48
2.17
2.48
2.17
2.48
2.17
2.48
2.48
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
For Notes See Page 14.
12
Johnson Controls Unitary Products
700691-YTG-A-0512
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
HEATING2
COIL1
MODEL
MBH
YHJR42S41S4
47F
COP
KW
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
T*(8,L)X*C16
FC/MC/PC48C
39.5
3.94
2.64
T*(8,L)X*C16
FC/PC60C
38.5
4.00
2.82
T*(8,L)X*C16
FC/PC60C+TXV
38.5
4.00
2.82
T*(8,L)X*C16
UC48C
39.5
3.94
2.64
T*(8,L)X*C16
UC60C
38.5
4.00
2.82
T*(8,L)X*C16
UC60C+TXV
38.5
4.00
2.82
T*(8,L)X*C20
FC/MC/PC48C
39.5
3.94
2.64
T*(8,L)X*C20
FC/PC60C
38.5
4.00
2.82
T*(8,L)X*C20
FC/PC60C+TXV
38.5
4.00
2.82
T*(8,L)X*C20
UC48C
39.5
3.94
2.64
T*(8,L)X*C20
UC60C
38.5
4.00
2.82
T*(8,L)X*C20
UC60C+TXV
38.5
4.00
2.82
T*9(C,V)*C16
FC/MC/PC48C
39.5
3.96
2.64
T*9(C,V)*C16
FC/PC60C+TXV
38.5
4.00
2.82
T*9(C,V)*C16
UC48C
39.5
3.96
2.64
T*9(C,V)*C16
UC60C
38.5
4.00
2.82
T*9(C,V)*C20
FC/MC/PC48C
39.5
3.96
2.64
T*9(C,V)*C20
FC/PC60C
38.5
4.00
2.82
T*9(C,V)*C20
FC/PC60C+TXV
38.5
4.00
2.82
T*9(C,V)*C20
UC48C
39.5
3.96
2.64
T*9(C,V)*C20
UC60C
38.5
4.00
2.82
T*9(C,V)*C20
UC60C+TXV
38.5
4.00
2.82
T*9(C,V)*D20
FC/MC/PC48D
39.5
3.96
2.64
T*9(C,V)*D20
FC/MC/PC60D
38.5
4.00
2.82
T*9(C,V)*D20
FC/MC/PC60D+TXV
38.5
4.00
2.82
T*9(C,V)*D20
UC48D
39.5
3.96
2.64
T*9(C,V)*D20
UC60D
38.5
4.00
2.82
T*9(C,V)*D20
UC60D+TXV
38.5
4.00
2.82
T*9X*C16
FC/MC/PC48C
39.5
3.94
2.64
T*9X*C16
FC/PC60C
38.5
4.00
2.82
T*9X*C16
FC/PC60C+TXV
38.5
4.00
2.82
T*9X*C16
UC48C
39.5
3.94
2.64
T*9X*C16
UC60C
38.5
4.00
2.82
T*9X*C16
UC60C+TXV
38.5
4.00
2.82
T*9X*C20
FC/MC/PC48C
39.5
3.94
2.64
T*9X*C20
FC/PC60C
38.5
4.00
2.82
T*9X*C20
FC/PC60C+TXV
38.5
4.00
2.82
T*9X*C20
UC48C
39.5
3.94
2.64
T*9X*C20
UC60C
38.5
4.00
2.82
T*9X*C20
UC60C+TXV
38.5
4.00
2.82
T*9X*D20
FC/MC/PC48D
39.5
3.94
2.64
T*9X*D20
FC/MC/PC60D
38.5
4.00
2.82
T*9X*D20
FC/MC/PC60D+TXV
38.5
4.00
2.82
T*9X*D20
UC48D
39.5
3.94
2.64
T*9X*D20
UC60D
38.5
4.00
2.82
T*9X*D20
UC60D+TXV
38.5
4.00
2.82
Y*(8,L)C*C16
FC/MC/PC48C
39.5
3.96
2.64
Y*(8,L)C*C16
FC/PC60C+TXV
38.5
4.00
2.82
Y*(8,L)C*C16
UC48C
39.5
3.96
2.64
Y*(8,L)C*C16
UC60C
38.5
4.00
2.82
Y*(8,L)C*C20
FC/MC/PC48C
39.5
3.96
2.64
Y*(8,L)C*C20
FC/PC60C+TXV
38.5
4.00
2.82
MBH
17F
COP
KW
HSPF
STD
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.4
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.4
23.40
23.4
23.40
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.17
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.17
2.48
2.17
2.48
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
For Notes See Page 14.
Johnson Controls Unitary Products
13
700691-YTG-A-0512
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
HEATING2
COIL1
MODEL
MBH
YHJR42S41S4
YHJR48S41S4
YHJR60S41S4
47F
COP
KW
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
Y*(8,L)C*C20
UC48C
39.5
3.96
2.64
Y*(8,L)C*C20
UC60C
38.5
4.00
2.82
Y*(8,L)C*C20
UC60C+TXV
38.5
4.00
2.82
Y*9C*C16
FC/MC/PC48C
39.5
3.96
2.64
Y*9C*C16
FC/PC60C+TXV
38.5
4.00
2.82
Y*9C*C16
UC48C
39.5
3.96
2.64
Y*9C*C16
UC60C
38.5
4.00
2.82
Y*9C*C20
FC/MC/PC48C
39.5
3.96
2.64
Y*9C*C20
FC/PC60C
38.5
4.00
2.82
Y*9C*C20
FC/PC60C+TXV
38.5
4.00
2.82
Y*9C*C20
UC48C
39.5
3.96
2.64
Y*9C*C20
UC60C
38.5
4.00
2.82
Y*9C*C20
UC60C+TXV
38.5
4.00
2.82
Y*9C*D20
FC/MC/PC48D
39.5
3.96
2.64
Y*9C*D20
FC/MC/PC60D
38.5
4.00
2.82
Y*9C*D20
FC/MC/PC60D+TXV
38.5
4.00
2.82
Y*9C*D20
UC48D
39.5
3.96
2.64
Y*9C*D20
UC60D
38.5
4.00
2.82
Y*9C*D20
UC60D+TXV
38.5
4.00
2.82
T*(8,L)V*C20
FC/MC62D
46.0
4.00
3.10
T*(8,L)X*C20
FC/MC62D
46.0
4.00
3.10
T*9(C,V)*C20
FC/MC62D
46.0
4.00
3.10
T*9(C,V)*D20
FC/MC62D
46.0
4.00
3.10
T*9X*C20
FC/MC62D
46.0
4.00
3.10
T*9X*D20
FC/MC62D
46.0
4.00
3.10
Y*(8,L)C*C20
FC/MC62D
46.0
4.00
3.10
Y*9C*C20
FC/MC62D
46.0
4.00
3.10
Y*9C*D20
FC/MC62D
46.0
4.00
3.10
T*(8,L)V*C20
FC/MC62D
57.0
3.32
5.03
T*(8,L)V*C20
FC64D
57.0
3.42
4.88
T*(8,L)X*C20
FC/MC62D
57.0
3.40
4.91
T*(8,L)X*C20
FC64D
57.0
3.46
4.83
T*9(C,V)*C20
FC/MC62D
57.0
3.30
5.06
T*9(C,V)*C20
FC64D
57.0
3.38
4.94
T*9(C,V)*D20
FC/MC62D
57.0
3.30
5.06
T*9(C,V)*D20
FC64D
57.0
3.40
4.91
T*9X*C20
FC/MC62D
57.0
3.34
5.00
T*9X*C20
FC64D
57.0
3.44
4.85
T*9X*D20
FC/MC62D
57.0
3.36
4.97
T*9X*D20
FC64D
57.0
3.46
4.83
Y*(8,L)C*C20
FC/MC62D
57.0
3.32
5.03
Y*(8,L)C*C20
FC64D
57.0
3.42
4.88
Y*9C*C20
FC/MC62D
57.0
3.30
5.06
Y*9C*C20
FC64D
57.0
3.38
4.94
Y*9C*D20
FC/MC62D
57.0
3.30
5.06
Y*9C*D20
FC64D
57.0
3.40
4.91
MBH
17F
COP
KW
HSPF
STD
23.4
23.40
23.40
23.4
23.40
23.4
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
23.4
23.40
23.40
27.0
27.0
27.0
27.0
27.0
27.0
27.0
27.0
27.0
36.0
35.8
35.8
36.0
36.4
36.4
36.2
36.2
35.8
36.0
36.0
35.8
36.0
35.8
36.4
36.4
36.2
36.2
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.76
2.78
2.78
2.78
2.78
2.78
2.78
2.78
2.78
2.78
2.60
2.64
2.64
2.68
2.56
2.60
2.58
2.60
2.60
2.66
2.60
2.64
2.60
2.64
2.56
2.60
2.58
2.60
2.17
2.48
2.48
2.17
2.48
2.17
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.17
2.48
2.48
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
4.06
3.97
3.97
3.93
4.16
4.10
4.11
4.08
4.03
3.96
4.06
3.97
4.06
3.97
4.16
4.10
4.11
4.08
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
7.70
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
8.20
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping
and no supHlemental electric heat operation.
3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period.
— = Not Applicable.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
14
Johnson Controls Unitary Products
700691-YTG-A-0512
ACCESSORIES
Low Temperature Cutout (S1-2LT06700224) - Prevents heat
pump operation below -10°F ambient temperature.
Refer to Price Manual for specific model numbers.
Start Assist Kit (S1-2SA067*) - Provides increased starting
torque for areas with low voltage. May be required on 48, 60
models. Models 18, 24, 30, 36, and 42 have been factory
installed. See Hard Start Kit Accessory Installation Manual for
Hard Start Kit part number for each model.
TXV Kits - S1-1TVM series thermal expansion valves precisely
meter refrigerant for optimum performance over a wide range of
conditions. See System Charge table for TXV part number for
each model.
Blower Time Delay - Available to increase efficiency when
installed. Installs on indoor section and maintains blower for
approximately one minute after cooling thermostat has been
satisfied.
Compressor Blanket - Designed to further reduce the normal
operating sound.
Add-on Fossil Fuel Control - Interface controls for use with
gas, oil furnaces and the heat pump system are available.
Outdoor Thermostat (S1-2TD06700124) - Provides additional
staging of supplemental electric heat.
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance and
installation, refer to the UPGNET “Low Voltage Wiring Diagram”
document to select and apply controls.
SOUND POWER LEVEL - TYPICAL OCTAVE BAND SPECTRUM (without tone adjustment)
Size
18
24
30
36
42
48
60
Test Condition
63
125
250
500
1000
2000
4000
8000
dBA
SQI
Cooling Mode
73
75
68
69
70
66
64
59
74
19.2
Heating Mode
73
75
69
70
71
65
64
60
75
19.1
Cooling Mode
72
72
68
70
72
68
66
63
76
19.1
Heating Mode
73
74
69
70
72
66
65
61
75
19.1
Cooling Mode
70
72
69
69
73
69
67
63
76
19.0
Heating Mode
72
72
71
69
70
65
65
63
74
19.0
Cooling Mode
72
71
69
71
72
69
67
64
76
19.0
Heating Mode
72
73
71
72
73
68
65
62
76
19.0
Cooling Mode
69
70
70
70
71
66
66
64
75
19.1
Heating Mode
71
73
72
71
72
68
67
66
76
19.1
Cooling Mode
73
73
72
71
73
70
68
64
77
19.1
Heating Mode
72
74
72
71
73
72
67
63
78
19.1
Cooling Mode
68
70
67
69
72
65
66
62
75
19.0
Heating Mode
69
69
63
67
67
64
65
62
72
19.1
Rated in accordance with ARI Standard 270.
Johnson Controls Unitary Products
15
700691-YTG-A-0512
TYPICAL INSTALLATION
MINIMUM 18” SERVICE
ACCESS CLEARANCE
ON ONE SIDE
60” OVERHEAD
CLEARANCE
THERMOSTAT
WEATHERPROOF
DISCONNECT
SWITCH
NEC CLASS 1 WIRING
NEC CLASS 2 WIRING
10” CLEARANCE
AROUND PERIMETER
TO FURNACE OR
AIR HANDLER
TERMINAL BLOCK
TO INDOOR COIL
NOTES:
ALL OUTDOOR WIRING MUST BE WEATHERPROOF.
MINIMUM 24” UNIT TO UNIT CLEARANCE.
CONTROL
ACCESS
PANEL
SEAL OPENING(S) WITH
PERMAGUM OR EQUIVALENT
TYPICAL FIELD WIRING
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
OUTDOOR UNIT
INDOOR UNIT
THERMOSTAT
LOW VOLTAGE TERMINAL BLOCK 3,4
IN AIR HANDLER WITH ELECTRIC HEAT
DEFROST
CONTROL
R
R
RED
B or C
C
BLK
Y
Y
YEL
O
O
ORG
W
W2
L or X
G
2
T
E
2
1 FIELD
INSTALLED
JUMPER
1 JUMPER TERMINALS E AND W TO HEAT
ON FIRST STAGE DURING EMERGENCY HEAT.
2 TERMINAL NOT USED ON ALL THERMOSTATS.
POWER WIRING
24V CONTROL WIRING
(NEC CLASS 2)
G
R
CONTACTOR
C
Y
T2
WHT
W
PUR
X/L
T1
M
O
L2
L1
GND.
SCREW
BRN W1/66
W1
BK
DEHUMIDIFICATION CONTROL CONNECTION
(Humidistat* Jumper must be removed)
GND.
LUG
CIRCUIT
BREAKER***
POWER WIRING
208/230-1-60
230-1-50
3 CHECK THE LOW VOLTAGE TERMINAL BLOCK ON THE INDOOR UNIT FOR THE ACTUAL ARRANGEMENT OF THE TERMINALS.
4 CONNECT POWER WIRING TO TERMINAL BLOCK 3TB ON UNITS WITHOUT ELECTRIC HEAT OR CIRCUIT BREAKER.
16
Johnson Controls Unitary Products
700691-YTG-A-0512
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJR18S41S3
INDOOR COIL MODEL NO.
F6FP018
IDCFM
450
600
750
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
72
57
62
62
67
72
T.C.
18.1
19.9
20.3
22.0
23.3
19.9
21.2
21.3
22.8
23.9
21.8
22.5
22.4
23.5
24.6
65
S.C.
18.0
16.0
14.2
14.1
12.1
19.9
18.4
15.6
15.2
12.7
21.7
20.7
17.0
16.3
13.3
KW
1.30
1.30
1.30
1.30
1.30
1.40
1.40
1.40
1.40
1.40
1.40
1.50
1.50
1.50
1.50
23.3
75
85
95
105
115
125
T.C.
17.2
18.6
18.9
20.7
22.0
18.9
19.8
19.8
21.4
22.7
20.5
20.9
20.8
22.1
S.C.
17.1
15.4
13.5
13.5
11.5
18.8
17.6
14.9
14.6
12.1
20.5
19.7
16.4
15.8
12.7
KW
1.30
1.40
1.40
1.40
1.40
1.40
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.60
1.60
22.1
T.C.
16.3
17.4
17.5
19.4
20.8
17.8
18.3
18.3
20.1
21.4
19.3
19.3
19.1
20.8
S.C.
16.2
14.9
12.8
12.8
10.8
17.8
16.8
14.3
14.1
11.5
19.3
18.7
15.8
15.4
12.1
KW
1.40
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.60
1.60
1.60
1.60
1.60
1.70
1.70
20.8
T.C.
15.4
16.1
16.1
18.1
19.6
16.7
16.9
16.8
18.7
20.2
18.1
17.7
17.5
19.4
S.C.
15.3
14.3
12.1
12.2
10.1
16.7
16.0
13.6
13.6
10.8
18.1
17.7
15.2
14.9
11.5
KW
1.50
1.50
1.50
1.60
1.60
1.60
1.60
1.60
1.70
1.70
1.70
1.70
1.70
1.80
1.80
19.2
T.C.
14.1
14.1
13.7
16.5
18.2
15.4
14.8
14.7
17.0
18.7
16.7
15.6
15.8
17.5
S.C.
14.1
12.9
11.0
11.6
9.5
15.3
14.2
12.6
12.9
10.2
16.6
15.5
14.2
14.3
10.9
KW
1.60
1.60
1.60
1.70
1.70
1.70
1.70
1.70
1.80
1.80
1.80
1.80
1.80
1.80
1.90
17.6
T.C.
12.8
12.1
11.2
15.0
16.9
14.0
12.8
12.6
15.3
17.2
15.2
13.5
14.1
15.6
S.C.
12.8
11.5
9.9
10.9
8.8
14.0
12.5
11.6
12.3
9.6
15.2
13.4
13.3
13.6
10.3
KW
1.70
1.70
1.70
1.80
1.80
1.80
1.80
1.80
1.80
1.90
1.90
1.90
1.90
1.90
2.00
15.9
T.C.
11.5
10.1
8.8
13.4
15.5
12.7
10.7
10.6
13.6
15.7
13.8
11.4
12.3
13.7
S.C.
11.5
10.1
8.8
10.3
8.2
12.6
10.7
10.5
11.6
9.0
13.7
11.3
12.3
12.9
9.7
KW
1.70
1.80
1.70
1.90
1.90
1.90
1.90
1.80
1.90
2.00
2.00
2.00
1.90
2.00
2.10
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
Coil
T.C.
S.C.
KW
Furnace
Coil
T.C.
S.C.
KW
AHE18B
–
0.95
0.94
0.97
T*(8,L)V*A12
FC/MC/PC/UC24A
1.00
1.04
0.98
AV*24
–
1.00
1.00
1.00
T*(8,L)V*A12
FC/MC/PC/UC30A
1.00
1.04
0.98
MV12B
FC/MC18B
1.00
1.00
1.00
T*(8,L)V*B12
FC/MC/PC/UC24B
1.00
1.04
0.98
MV12B
FC/MC24B
1.00
1.00
1.00
T*(8,L)V*B12
FC/MC/PC/UC30B
1.00
1.04
0.98
MV12B
FC/MC30B
1.00
1.00
1.00
T*(8,L)X*A12
FC/MC/PC/UC24A
1.00
1.04
0.98
MX12B
FC/MC18B
0.95
0.95
0.91
T*(8,L)X*A12
FC/MC/PC/UC30A
1.00
1.04
0.98
MX12B
FC/MC24B
0.95
0.97
0.97
T*(8,L)X*B12
FC/MC/PC/UC24B
1.00
1.04
0.98
MX12B
FC/MC30B
0.95
0.97
0.97
T*(8,L)X*B12
FC/MC/PC/UC30B
1.00
1.04
0.98
T*9V*A10
FC/MC/PC24A
1.00
1.00
1.00
T*9(C,V)*B12
FC/MC/PC/UC24B
1.00
1.04
0.98
T*9(C,V)*B12
FC/MC/PC/UC30B
1.00
1.04
0.98
T*9X*A10
FC/MC/PC24A
1.00
1.00
1.00
T*9X*B12
FC/MC/PC/UC24B
1.00
1.04
0.98
T*9X*B12
FC/MC/PC/UC30B
1.00
1.04
0.98
Y*(8,L)C*A12
FC/MC/PC/UC24A
1.00
1.04
0.98
Y*(8,L)C*A12
FC/MC/PC/UC30A
1.00
1.04
0.98
Y*(8,L)C*B12
FC/MC/PC/UC24B
1.00
1.04
0.98
Y*(8,L)C*B12
FC/MC/PC/UC30B
1.00
1.04
0.98
Y*9C*B12
FC/MC/PC/UC24B
1.00
1.04
0.98
Y*9C*B12
FC/MC/PC/UC30B
1.00
1.04
0.98
Johnson Controls Unitary Products
17
700691-YTG-A-0512
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJR24S41S4
INDOOR COIL MODEL NO.
F6FP024
IDCFM
600
800
1000
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
72
57
62
62
67
72
T.C.
24.4
26.0
26.9
29.5
30.7
26.4
26.3
28.0
30.4
31.4
28.4
26.5
29.0
31.4
32.0
65
S.C.
23.8
21.5
18.7
18.8
15.3
25.7
23.7
20.9
20.2
15.9
27.7
25.9
23.0
21.7
16.4
1.90
75
85
95
105
115
125
KW
1.60
1.60
1.70
1.70
1.70
1.70
1.70
1.80
1.80
1.80
1.80
1.80
1.80
1.90
T.C.
22.6
24.0
24.2
27.3
28.9
24.7
24.7
25.3
28.1
29.7
26.8
25.4
26.5
28.8
30.4
S.C.
22.1
20.6
17.5
17.8
14.6
24.1
22.7
19.8
19.5
15.3
26.1
24.8
22.0
21.1
16.0
2.00
KW
1.70
1.70
1.70
1.80
1.80
1.80
1.80
1.80
1.90
1.90
1.90
1.90
1.90
2.00
T.C.
20.9
21.9
21.4
25.2
27.1
23.0
23.1
22.7
25.8
28.0
25.1
24.3
24.0
26.3
28.8
S.C.
20.4
19.8
16.4
16.9
13.8
22.4
21.8
18.7
18.7
14.7
24.5
23.7
21.1
20.5
15.6
2.20
KW
1.80
1.80
1.80
1.90
2.00
1.90
1.90
1.90
2.00
2.10
2.10
2.10
2.00
2.10
T.C.
19.1
19.9
18.7
23.1
25.3
21.3
21.6
20.1
23.4
26.3
23.5
23.2
21.5
23.8
27.3
S.C.
18.6
18.9
15.2
16.0
13.1
20.8
20.8
17.6
18.0
14.1
23.0
22.7
20.1
19.9
15.2
2.30
KW
1.90
1.90
1.90
2.00
2.10
2.00
2.00
2.00
2.10
2.20
2.20
2.20
2.10
2.20
T.C.
17.4
17.8
16.4
20.1
23.3
19.3
19.8
17.8
20.8
24.1
21.3
21.8
19.1
21.5
24.9
S.C.
16.9
17.1
14.2
14.9
12.2
18.9
19.2
16.2
17.0
13.4
20.8
21.2
18.2
19.1
14.6
2.40
KW
2.00
2.00
1.90
2.10
2.20
2.10
2.10
2.10
2.20
2.30
2.30
2.30
2.20
2.30
T.C.
15.6
15.6
14.2
17.2
21.3
17.4
18.0
15.4
18.2
22.0
19.1
20.3
16.7
19.1
22.6
S.C.
15.2
15.2
13.3
13.8
11.2
17.0
17.5
14.8
16.0
12.6
18.7
19.8
16.3
18.3
14.0
2.50
KW
2.10
2.10
2.00
2.10
2.30
2.20
2.30
2.10
2.30
2.40
2.40
2.40
2.30
2.40
T.C.
13.9
13.5
11.9
14.2
19.4
15.4
16.2
13.1
15.5
19.8
16.9
18.9
14.4
16.8
20.3
S.C.
13.5
13.4
11.9
12.6
10.3
15.0
15.9
13.1
15.0
11.9
16.5
18.4
14.4
16.8
13.5
KW
2.20
2.10
2.10
2.20
2.40
2.30
2.40
2.20
2.30
2.50
2.50
2.60
2.40
2.50
2.70
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
Coil
T.C.
S.C.
KW
Furnace
Coil
T.C.
S.C.
KW
AHE22B
–
1.00
1.00
1.00
T*(8,L)X*B12
FC/MC/PC30B
1.00
1.02
0.97
AHE24B
–
0.99
0.89
1.01
T*(8,L)X*B12
UC24B
1.00
1.02
1.00
AHE30B
–
0.99
0.89
1.01
T*(8,L)X*B12
UC30B
1.00
1.02
0.97
AV*24
–
1.00
1.00
1.00
T*9(C,V)*B12
FC/MC/PC24B
1.00
1.02
1.00
MV12B
FC/MC24B
1.00
1.00
1.00
T*9(C,V)*B12
FC/MC/PC30B
1.00
1.02
0.98
MV12B
FC/MC30B
1.00
1.00
1.00
T*9(C,V)*B12
UC24B
1.00
1.02
0.98
MX12B
FC/MC24B
1.00
0.98
1.01
T*9(C,V)*B12
UC30B
1.00
1.02
0.97
MX12B
FC/MC30B
1.00
0.98
1.01
T*9X*B12
FC/MC/PC24B
1.00
1.02
1.00
T*9X*B12
FC/MC/PC30B
1.00
1.02
0.97
T*9X*B12
UC24B
1.00
1.02
1.00
T*9X*B12
UC30B
1.00
1.02
0.98
Y*(8,L)C*A12
FC/MC/PC24A
1.00
1.02
0.99
Y*(8,L)C*A12
FC/MC/PC30A
1.00
1.02
0.97
Y*(8,L)C*A12
UC24A
1.00
1.02
1.00
Y*(8,L)C*A12
UC30A
1.00
1.02
0.99
Y*(8,L)C*B12
FC/MC/PC24B
1.00
1.02
1.00
Y*(8,L)C*B12
FC/MC/PC30B
1.00
1.02
1.00
Y*(8,L)C*B12
UC24B
1.00
1.02
0.97
Furnace
Coil
T.C.
S.C.
KW
T*(8,L)V*A12
FC/MC/PC24A
1.00
1.02
1.00
T*(8,L)V*A12
FC/MC/PC30A
1.00
1.02
0.99
T*(8,L)V*A12
UC24A
1.00
1.02
1.00
T*(8,L)V*A12
UC30A
1.00
1.02
0.98
T*(8,L)V*B12
FC/MC/PC24B
1.00
1.02
0.99
T*(8,L)V*B12
FC/MC/PC30B
1.00
1.02
0.99
T*(8,L)V*B12
UC24B
1.00
1.02
0.99
T*(8,L)V*B12
UC30B
1.00
1.02
0.99
T*(8,L)X*A12
FC/MC/PC24A
1.00
1.02
1.00
T*(8,L)X*A12
FC/MC/PC30A
1.00
1.02
1.00
T*(8,L)X*A12
UC24A
1.00
1.02
1.00
T*(8,L)X*A12
UC30A
1.00
1.02
0.98
T*(8,L)X*B12
FC/MC/PC24B
1.00
1.02
0.99
18
Y*(8,L)C*B12
UC30B
1.00
1.02
0.97
Y*9C*B12
FC/MC/PC24B
1.00
1.02
0.99
Y*9C*B12
FC/MC/PC30B
1.00
1.02
1.00
Y*9C*B12
UC24B
1.00
1.02
0.99
Y*9C*B12
UC30B
1.00
1.02
0.98
Johnson Controls Unitary Products
700691-YTG-A-0512
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJR30S41S4
INDOOR COIL MODEL NO.
F6FP030
IDCFM
800
1000
1200
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
72
57
62
62
67
72
T.C.
29.7
32.9
32.9
35.3
38.2
31.8
33.6
33.9
36.4
39.1
33.9
34.4
34.8
37.5
40.0
65
S.C.
29.1
26.1
22.6
22.0
18.5
31.2
29.0
24.5
23.9
19.4
33.3
31.8
26.4
25.8
20.3
KW
2.00
2.00
2.00
2.10
2.10
2.10
2.10
2.10
2.20
2.20
2.20
2.20
2.20
2.30
2.30
37.7
75
85
95
105
115
125
T.C.
28.1
30.6
30.6
33.2
36.0
30.1
31.5
31.5
34.2
36.9
32.1
32.3
32.5
35.2
S.C.
27.5
25.1
21.5
21.2
17.6
29.5
27.8
23.4
23.1
18.6
31.5
30.4
25.4
25.0
19.5
KW
2.10
2.10
2.10
2.20
2.30
2.20
2.30
2.30
2.30
2.40
2.40
2.40
2.40
2.40
2.50
35.4
T.C.
26.4
28.3
28.2
31.1
33.9
28.4
29.3
29.2
32.1
34.6
30.4
30.3
30.2
33.0
S.C.
25.9
24.1
20.4
20.3
16.8
27.8
26.6
22.4
22.2
17.7
29.8
29.0
24.4
24.2
18.6
KW
2.20
2.30
2.30
2.40
2.40
2.40
2.40
2.40
2.50
2.50
2.50
2.50
2.50
2.60
2.60
33.0
T.C.
24.8
26.1
25.9
29.1
31.8
26.7
27.1
26.9
29.9
32.4
28.6
28.2
27.9
30.7
S.C.
24.3
23.1
19.3
19.4
15.9
26.2
25.4
21.4
21.4
16.8
28.0
27.6
23.5
23.4
17.8
KW
2.40
2.40
2.40
2.50
2.60
2.50
2.50
2.50
2.60
2.70
2.70
2.60
2.60
2.70
2.80
30.6
T.C.
23.1
23.6
23.5
26.8
29.4
24.8
25.0
24.4
27.5
30.0
26.6
26.4
25.3
28.2
S.C.
22.6
21.9
18.3
18.5
14.9
24.4
23.9
20.4
20.5
15.9
26.1
25.9
22.4
22.4
16.9
KW
2.50
2.50
2.50
2.70
2.80
2.70
2.70
2.70
2.80
2.90
2.80
2.80
2.80
2.90
3.00
28.2
T.C.
21.4
21.1
21.2
24.6
27.1
23.0
22.9
21.9
25.1
27.6
24.6
24.6
22.7
25.7
S.C.
21.0
20.7
17.3
17.6
13.9
22.5
22.4
19.3
19.5
14.9
24.1
24.1
21.4
21.4
16.0
KW
2.70
2.70
2.70
2.80
2.90
2.80
2.80
2.80
2.90
3.00
3.00
3.00
2.90
3.00
3.10
25.8
T.C.
19.7
18.7
18.8
22.3
24.8
21.2
20.7
19.4
22.8
25.3
22.6
22.8
20.1
23.2
S.C.
19.3
18.7
16.2
16.7
12.9
20.7
20.7
18.3
18.5
14.0
22.1
22.3
20.1
20.4
15.1
KW
2.80
2.80
2.80
3.00
3.10
3.00
3.00
2.90
3.10
3.20
3.20
3.20
3.10
3.20
3.30
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
Coil
T.C.
S.C.
KW
Furnace
Coil
T.C.
S.C
KW
AHE30B
–
0.97
1.00
1.04
T*(8,L)V*B12
FC/MC/PC43B
1.05
1.05
0.99
AHE34C
–
1.00
1.00
1.00
T*(8,L)V*C16
FC/MC/PC43C
1.05
1.05
0.99
AHE36C
–
0.97
1.03
1.04
T*(8,L)X*B12
FC/MC/PC43B
1.05
1.05
0.99
AV*36
–
1.00
1.00
1.00
T*(8,L)X*C16
FC/MC/PC43C
1.05
1.05
0.97
MV12B
FC/MC43B
1.00
1.00
1.00
T*9(C,V)*B12
FC/MC/PC43B
1.05
1.05
0.98
MV16C
FC/MC35C
1.00
1.00
1.00
T*9(C,V)*C16
FC/MC/PC43C
1.05
1.05
0.99
MV16C
FC/MC43C
1.00
1.00
1.00
T*9X*B12
FC/MC/PC43B
1.05
1.05
0.96
MX12B
FC/MC35B
0.97
1.05
1.04
T*9X*C16
FC/MC/PC43C
1.05
1.05
0.98
MX12B
FC/MC43B
0.97
1.08
1.04
Y*(8,L)C*B12
FC/MC/PC43B
1.05
1.05
0.97
Y*(8,L)C*C16
FC/MC/PC43C
1.05
1.05
0.99
Y*9C*B12
FC/MC/PC43B
1.05
1.05
0.98
Y*9C*C16
FC/MC/PC43C
1.05
1.05
0.99
Johnson Controls Unitary Products
19
700691-YTG-A-0512
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJR36S41S4
INDOOR COIL MODEL NO.
F6FP036
IDCFM
1000
1200
1400
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
72
57
62
62
67
72
T.C.
35.0
37.8
37.8
41.8
46.1
37.3
39.1
39.1
43.1
47.3
39.5
40.5
40.5
44.4
48.5
65
S.C.
34.7
31.0
26.5
26.4
22.0
36.9
34.3
28.6
28.4
23.3
39.1
37.6
30.6
30.4
24.5
2.70
75
85
95
105
115
125
KW
2.40
2.50
2.50
2.50
2.60
2.50
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.70
T.C.
32.9
34.9
34.9
38.9
43.4
35.0
36.1
36.1
40.2
44.4
37.1
37.2
37.3
41.4
45.5
S.C.
32.6
29.7
25.2
25.2
20.9
34.6
32.4
27.2
27.2
22.1
36.7
35.2
29.2
29.2
23.3
2.90
KW
2.60
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.80
2.80
2.80
2.80
2.80
2.80
T.C.
30.8
32.0
32.0
36.0
40.7
32.7
33.0
33.1
37.2
41.6
34.6
34.0
34.1
38.4
42.5
S.C.
30.4
28.4
23.9
24.0
19.7
32.3
30.6
25.9
26.0
20.9
34.2
32.8
27.9
28.0
22.1
3.10
KW
2.70
2.80
2.80
2.80
2.90
2.80
2.90
2.90
2.90
3.00
3.00
2.90
2.90
3.00
T.C.
28.6
29.1
29.2
33.1
38.0
30.4
30.0
30.0
34.3
38.8
32.1
30.8
30.9
35.4
39.5
S.C.
28.3
27.1
22.6
22.8
18.6
30.1
28.8
24.6
24.8
19.7
31.8
30.4
26.5
26.8
20.8
3.30
KW
2.90
2.90
2.90
3.00
3.10
3.00
3.00
3.00
3.10
3.20
3.10
3.10
3.10
3.20
T.C.
26.1
26.4
25.7
29.7
34.3
27.8
27.6
26.4
30.6
35.3
29.5
28.8
27.2
31.6
36.3
S.C.
25.8
25.2
21.1
21.4
17.3
27.5
26.9
23.0
23.4
18.4
29.2
28.5
24.8
25.4
19.6
3.50
KW
3.10
3.10
3.00
3.10
3.30
3.20
3.20
3.10
3.30
3.40
3.30
3.30
3.20
3.40
T.C.
23.6
23.6
22.2
26.2
30.6
25.2
25.2
22.8
27.0
31.8
26.9
26.9
23.4
27.8
33.1
S.C.
23.3
23.3
19.6
20.1
15.9
25.0
25.0
21.4
22.0
17.2
26.6
26.6
23.2
23.9
18.4
3.70
KW
3.20
3.20
3.20
3.30
3.50
3.40
3.40
3.30
3.40
3.60
3.50
3.50
3.40
3.50
T.C.
21.1
20.8
18.7
22.7
26.9
22.6
22.8
19.2
23.3
28.4
24.2
24.9
19.7
24.0
29.8
S.C.
20.8
20.8
18.1
18.7
14.6
22.4
22.8
19.2
20.6
15.9
24.0
24.6
19.7
22.5
17.2
KW
3.40
3.40
3.30
3.50
3.70
3.50
3.50
3.40
3.60
3.80
3.70
3.70
3.50
3.70
3.90
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
Coil
T.C.
S.C.
KW
Furnace
Coil
T.C.
S.C.
KW
AHE34C
–
1.00
1.00
1.00
T*(8,L)V*C16
FC/MC/PC43C
1.00
1.00
1.02
AHE36C
–
1.03
1.05
1.06
T*(8,L)V*C20
FC/MC/PC43C
1.00
1.00
1.02
AV*36
–
1.02
1.00
1.00
T*(8,L)X*C16
FC/MC/PC43C
1.00
1.00
1.02
MV16C
FC/MC35C
1.00
1.00
1.00
T*(8,L)X*C20
FC/MC/PC43C
1.00
1.00
1.02
MV16C
FC/MC43C
1.02
1.00
1.00
T*9(C,V)*C16
FC/MC/PC43C
1.00
1.00
1.02
MX12B
FC/MC35B
1.01
1.02
1.04
T*9(C,V)*C20
FC/MC/PC43C
1.00
1.00
1.02
MX12B
FC/MC43B
1.03
1.05
1.06
T*9X*C16
FC/MC/PC43C
1.00
1.00
1.02
MX16C
FC/MC43C
1.02
1.03
1.06
T*9X*C20
FC/MC/PC43C
1.00
1.00
1.02
Y*(8,L)C*C16
FC/MC/PC43C
1.00
1.00
1.02
Y*(8,L)C*C20
FC/MC/PC43C
1.00
1.00
1.02
Y*9C*C16
FC/MC/PC43C
1.00
1.00
1.02
Y*9C*C20
FC/MC/PC43C
1.00
1.00
1.02
20
Johnson Controls Unitary Products
700691-YTG-A-0512
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJR42S41S4
INDOOR COIL MODEL NO.
F6FP042
IDCFM
1200
1400
1600
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
72
57
62
62
67
72
T.C.
43.1
45.7
46.2
51.4
56.6
45.5
46.9
47.2
52.7
57.8
47.9
48.0
48.2
54.0
59.1
65
S.C.
43.1
40.8
34.9
34.9
28.6
45.5
44.6
37.1
37.1
30.0
47.9
48.0
39.3
39.3
31.3
KW
2.50
2.50
2.50
2.60
2.60
2.60
2.60
2.50
2.60
2.70
2.70
2.60
2.60
2.70
2.80
55.2
75
85
95
105
115
125
T.C.
40.3
42.3
42.3
47.4
52.5
42.5
43.6
43.6
48.6
53.9
44.7
44.8
44.8
49.8
S.C.
40.3
39.3
33.1
33.2
26.9
42.5
42.4
35.4
35.4
28.4
44.7
44.8
37.8
37.6
29.8
KW
2.70
2.60
2.60
2.70
2.80
2.80
2.70
2.70
2.80
2.90
2.80
2.80
2.80
2.90
3.00
51.4
T.C.
37.6
38.9
38.4
43.5
48.5
39.6
40.3
40.0
44.5
49.9
41.6
41.7
41.5
45.6
S.C.
37.6
37.7
31.2
31.5
25.3
39.6
40.3
33.7
33.7
26.8
41.6
41.7
36.2
35.9
28.2
KW
2.90
2.80
2.80
2.90
3.00
2.90
2.90
2.90
3.00
3.10
3.00
3.00
3.00
3.10
3.20
47.5
T.C.
34.8
35.4
34.5
39.6
44.5
36.6
37.0
36.3
40.5
46.0
38.4
38.5
38.1
41.4
S.C.
34.8
35.4
29.4
29.9
23.7
36.6
37.0
32.1
32.0
25.2
38.4
38.5
34.7
34.2
26.6
KW
3.00
3.00
3.00
3.00
3.20
3.10
3.10
3.10
3.10
3.30
3.20
3.20
3.20
3.30
3.30
40.4
T.C.
29.7
30.7
28.6
33.3
40.4
32.4
32.9
30.2
35.1
40.4
35.1
35.2
31.7
36.9
S.C.
29.7
30.7
26.6
27.3
22.1
32.4
32.9
28.5
29.9
23.1
35.1
35.2
30.5
32.4
24.1
KW
3.10
3.10
3.10
3.20
3.40
3.20
3.20
3.20
3.30
3.40
3.30
3.30
3.30
3.40
3.50
33.2
T.C.
24.5
25.9
22.7
27.1
36.3
28.2
28.9
24.0
29.7
34.8
31.8
31.8
25.3
32.4
S.C.
24.5
25.9
22.7
24.8
20.5
28.2
28.9
24.0
27.8
21.0
31.8
31.8
25.3
30.7
21.6
KW
3.30
3.30
3.20
3.30
3.50
3.40
3.40
3.30
3.40
3.60
3.50
3.50
3.40
3.50
3.70
26.0
T.C.
19.4
21.1
16.8
20.9
32.3
23.9
24.8
17.8
24.4
29.1
28.5
28.5
18.9
27.8
S.C.
19.4
21.1
16.8
20.9
18.9
23.9
24.8
17.8
24.4
19.0
28.5
28.5
18.9
27.8
19.1
KW
3.40
3.50
3.30
3.50
3.70
3.50
3.60
3.40
3.60
3.80
3.70
3.70
3.50
3.70
3.80
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
Coil
T.C.
S.C.
KW
AHE42D
–
1.00
0.98
1.07
AHE48D
–
1.00
0.99
1.00
AV*48
–
1.00
0.99
1.00
AV*60
–
1.00
0.99
1.07
MV16C
FC/MC48C
1.00
1.00
1.00
MV16C
FC60C
1.00
0.99
1.07
MV20D
FC/MC48D
1.00
1.00
1.00
MV20D
FC/MC60D
1.00
0.99
1.07
MX16C
FC/MC48C
1.01
0.99
1.09
MX16C
FC60C
1.00
0.99
1.07
MX20D
FC/MC48D
1.00
0.99
1.07
MX20D
FC/MC60D
1.00
0.99
1.07
Continued on next page.
Johnson Controls Unitary Products
21
700691-YTG-A-0512
Furnace
Coil
T.C.
S.C.
KW
Furnace
Coil
T.C.
S.C.
KW
T*(8,L)V*C16
FC/MC/PC48C
1.00
1.00
1.02
T*9X*C16
UC48C
1.00
1.00
1.02
1.02
T*(8,L)V*C16
FC/PC60C+TXV
0.98
1.00
1.02
T*9X*C16
UC60C
0.98
1.00
T*(8,L)V*C16
UC48C
1.00
1.00
1.02
T*9X*C16
UC60C+TXV
0.98
1.00
1.02
T*(8,L)V*C16
UC60C
0.98
1.00
1.02
T*9X*C20
FC/MC/PC48C
1.00
1.00
1.02
T*(8,L)V*C20
FC/MC/PC48C
1.00
1.00
1.02
T*9X*C20
FC/PC60C
0.98
1.00
1.02
T*(8,L)V*C20
FC/PC60C+TXV
0.98
1.00
1.02
T*9X*C20
FC/PC60C+TXV
0.98
1.00
1.02
T*(8,L)V*C20
UC48C
1.00
1.00
1.02
T*9X*C20
UC48C
1.00
1.00
1.02
T*(8,L)V*C20
UC60C
0.98
1.00
1.02
T*9X*C20
UC60C
0.98
1.00
1.02
T*(8,L)V*C20
UC60C+TXV
0.98
1.00
1.02
T*9X*C20
UC60C+TXV
0.98
1.00
1.02
T*(8,L)X*C16
FC/MC/PC48C
1.00
1.00
1.02
T*9X*D20
FC/MC/PC48D
1.00
1.00
1.02
T*(8,L)X*C16
FC/PC60C
0.98
1.00
1.02
T*9X*D20
FC/MC/PC60D
0.98
1.00
1.02
T*(8,L)X*C16
FC/PC60C+TXV
0.98
1.00
1.02
T*9X*D20
FC/MC/PC60D+TXV
0.98
1.00
1.02
T*(8,L)X*C16
UC48C
1.00
1.00
1.02
T*9X*D20
UC48D
1.00
1.00
1.02
T*(8,L)X*C16
UC60C
0.98
1.00
1.02
T*9X*D20
UC60D
0.98
1.00
1.02
T*(8,L)X*C16
UC60C+TXV
0.98
1.00
1.02
T*9X*D20
UC60D+TXV
0.98
1.00
1.02
T*(8,L)X*C20
FC/MC/PC48C
1.00
1.00
1.02
Y*(8,L)C*C16
FC/MC/PC48C
1.00
1.00
1.02
T*(8,L)X*C20
FC/PC60C
0.98
1.00
1.02
Y*(8,L)C*C16
FC/PC60C+TXV
0.98
1.00
1.02
T*(8,L)X*C20
FC/PC60C+TXV
0.98
1.00
1.02
Y*(8,L)C*C16
UC48C
1.00
1.00
1.02
T*(8,L)X*C20
UC48C
1.00
1.00
1.02
Y*(8,L)C*C16
UC60C
0.98
1.00
1.02
T*(8,L)X*C20
UC60C
0.98
1.00
1.02
Y*(8,L)C*C20
FC/MC/PC48C
1.00
1.00
1.02
T*(8,L)X*C20
UC60C+TXV
0.98
1.00
1.02
Y*(8,L)C*C20
FC/PC60C+TXV
0.98
1.00
1.02
T*9(C,V)*C16
FC/MC/PC48C
1.00
1.00
1.02
Y*(8,L)C*C20
UC48C
1.00
1.00
1.02
T*9(C,V)*C16
FC/PC60C+TXV
0.98
1.00
1.02
Y*(8,L)C*C20
UC60C
0.98
1.00
1.02
T*9(C,V)*C16
UC48C
1.00
1.00
1.02
Y*(8,L)C*C20
UC60C+TXV
0.98
1.00
1.02
T*9(C,V)*C16
UC60C
0.98
1.00
1.02
Y*9C*C16
FC/MC/PC48C
1.00
1.00
1.02
T*9(C,V)*C20
FC/MC/PC48C
1.00
1.00
1.02
Y*9C*C16
FC/PC60C+TXV
0.98
1.00
1.02
T*9(C,V)*C20
FC/PC60C
0.98
1.00
1.02
Y*9C*C16
UC48C
1.00
1.00
1.02
T*9(C,V)*C20
FC/PC60C+TXV
0.98
1.00
1.02
Y*9C*C16
UC60C
0.98
1.00
1.02
T*9(C,V)*C20
UC48C
1.00
1.00
1.02
Y*9C*C20
FC/MC/PC48C
1.00
1.00
1.02
T*9(C,V)*C20
UC60C
0.98
1.00
1.02
Y*9C*C20
FC/PC60C
0.98
1.00
1.02
T*9(C,V)*C20
UC60C+TXV
0.98
1.00
1.02
Y*9C*C20
FC/PC60C+TXV
0.98
1.00
1.02
T*9(C,V)*D20
FC/MC/PC48D
1.00
1.00
1.02
Y*9C*C20
UC48C
1.00
1.00
1.02
T*9(C,V)*D20
FC/MC/PC60D
0.98
1.00
1.02
Y*9C*C20
UC60C
0.98
1.00
1.02
T*9(C,V)*D20
FC/MC/PC60D+TXV
0.98
1.00
1.02
Y*9C*C20
UC60C+TXV
0.98
1.00
1.02
T*9(C,V)*D20
UC48D
1.00
1.00
1.02
Y*9C*D20
FC/MC/PC48D
1.00
1.00
1.02
T*9(C,V)*D20
UC60D
0.98
1.00
1.02
Y*9C*D20
FC/MC/PC60D
0.98
1.00
1.02
T*9(C,V)*D20
UC60D+TXV
0.98
1.00
1.02
Y*9C*D20
FC/MC/PC60D+TXV
0.98
1.00
1.02
T*9X*C16
FC/MC/PC48C
1.00
1.00
1.02
Y*9C*D20
UC48D
1.00
1.00
1.02
T*9X*C16
FC/PC60C
0.98
1.00
1.02
Y*9C*D20
UC60D
0.98
1.00
1.02
T*9X*C16
FC/PC60C+TXV
0.98
1.00
1.02
Y*9C*D20
UC60D+TXV
0.98
1.00
1.02
22
Johnson Controls Unitary Products
700691-YTG-A-0512
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJR48S41S14
INDOOR COIL MODEL NO.
F6FP048
IDCFM
1400
1600
1800
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
80
80
75
80
80
80
80
75
80
80
80
80
75
80
80
ID WB (°F)
57
62
62
67
72
57
62
62
67
72
57
62
62
67
72
T.C.
48.9
52.7
52.5
58.0
62.8
50.9
53.6
53.6
59.0
64.0
52.9
54.6
54.8
60.0
65.2
65
S.C.
48.9
46.4
39.4
39.3
31.8
50.9
49.7
41.6
41.3
32.9
52.9
53.1
43.8
43.4
33.9
KW
3.10
3.20
3.20
3.30
3.50
3.20
3.20
3.30
3.40
3.60
3.20
3.30
3.30
3.60
3.70
60.8
75
85
95
105
115
125
T.C.
46.2
48.8
48.8
54.3
59.2
48.2
49.8
49.8
55.2
60.0
50.3
50.8
50.8
56.2
S.C.
46.2
44.5
37.7
37.7
30.4
48.2
47.5
39.8
39.7
31.5
50.3
50.5
42.0
41.8
32.6
KW
3.30
3.40
3.40
3.50
3.70
3.40
3.50
3.50
3.70
3.80
3.50
3.50
3.60
3.80
3.90
56.5
T.C.
43.4
44.9
45.1
50.5
55.6
45.5
45.9
45.9
51.5
56.0
47.6
46.9
46.8
52.4
S.C.
43.4
42.7
35.9
36.0
28.9
45.5
45.3
38.0
38.1
30.1
47.6
46.9
40.2
40.2
31.2
KW
3.50
3.60
3.60
3.70
3.90
3.60
3.70
3.70
3.90
4.00
3.80
3.80
3.80
4.00
4.10
52.1
T.C.
40.6
40.9
41.3
46.7
52.0
42.8
42.0
42.1
47.7
52.1
44.9
43.0
42.8
48.6
S.C.
40.6
40.8
34.1
34.4
27.5
42.8
42.0
36.2
36.5
28.7
44.9
43.0
38.3
38.6
29.8
KW
3.70
3.80
3.70
4.00
4.10
3.90
3.90
3.90
4.10
4.20
4.00
4.00
4.00
4.20
4.30
48.4
T.C.
37.2
37.4
36.7
43.0
47.9
39.3
38.9
37.4
43.7
48.2
41.4
40.4
38.1
44.4
S.C.
37.2
37.4
32.0
32.8
25.9
39.3
38.9
34.1
34.9
27.0
41.4
40.4
36.3
36.9
28.1
KW
3.90
4.00
3.90
4.10
4.30
4.10
4.10
4.00
4.30
4.40
4.30
4.20
4.10
4.40
4.50
44.7
T.C.
33.7
33.8
32.1
39.2
43.9
35.8
35.8
32.8
39.7
44.3
37.8
37.8
33.4
40.2
S.C.
33.7
33.8
29.9
31.2
24.4
35.8
35.8
32.1
33.2
25.4
37.8
37.8
33.4
35.2
26.5
KW
4.10
4.10
4.10
4.30
4.60
4.30
4.30
4.20
4.50
4.70
4.50
4.50
4.30
4.60
4.80
40.9
T.C.
30.3
30.2
27.5
35.4
39.8
32.3
32.7
28.1
35.7
40.4
34.3
35.2
28.7
35.9
S.C.
30.3
30.2
27.5
29.6
22.9
32.3
32.7
28.1
31.5
23.8
34.3
35.2
28.7
33.5
24.8
KW
4.40
4.30
4.20
4.50
4.80
4.50
4.50
4.40
4.70
4.90
4.70
4.70
4.50
4.80
5.00
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
Coil
T.C.
S.C.
KW
Furnace
Coil
T.C.
S.C.
KW
AHE48D
–
1.00
0.98
1.06
T*(8,L)V*C20
FC/MC62D
1.00
1.00
1.03
AHE60D
–
1.01
1.00
1.07
T*(8,L)X*C20
FC/MC62D
1.00
1.00
1.03
AV*48
–
1.00
1.00
1.00
T*9(C,V)*C20
FC/MC62D
1.00
1.00
1.03
AV*60
–
1.00
1.00
1.00
T*9(C,V)*D20
FC/MC62D
1.00
1.00
1.03
MV20D
FC/MC60D
1.00
1.00
1.00
T*9X*C20
FC/MC62D
1.00
1.00
1.03
MV20D
FC/MC62D
1.00
1.00
1.00
T*9X*D20
FC/MC62D
1.00
1.00
1.03
MX20D
FC/MC60D
1.01
1.02
1.07
Y*(8,L)C*C20
FC/MC62D
1.00
1.00
1.03
MX20D
FC/MC62D
1.02
1.02
1.09
Y*9C*D20
FC/MC62D
1.00
1.00
1.03
Y*9C*C20
FC/MC62D
1.00
1.00
1.03
Johnson Controls Unitary Products
23
700691-YTG-A-0512
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJR60S41S4
INDOOR COIL MODEL NO.
AHX60
CONDENSING
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
IDCFM
ID DB (°F)
ID WB (°F)
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
80
57
54.0
54.0
2.80
51.9
51.9
3.20
49.7
49.7
3.60
47.6
47.6
4.00
44.3
44.3
4.50
41.1
41.1
4.90
37.9
37.9
5.40
80
62
57.1
51.0
2.80
54.1
49.8
3.20
51.1
48.6
3.60
48.1
47.4
4.00
44.6
44.6
4.50
41.3
41.3
5.00
37.9
37.9
5.40
1600
75
62
56.9
43.4
2.80
53.9
42.0
3.20
51.0
40.7
3.60
48.1
39.3
4.00
44.1
37.6
4.50
40.2
35.9
4.90
36.2
34.2
5.40
80
67
62.3
42.9
2.90
59.2
41.7
3.30
56.2
40.5
3.60
53.1
39.2
4.00
48.7
37.4
4.50
44.4
35.7
5.00
40.1
33.9
5.40
80
72
67.6
34.8
2.90
64.5
33.5
3.30
61.4
32.2
3.70
58.3
30.9
4.10
53.5
29.0
4.60
48.9
27.3
5.00
44.3
25.5
5.50
80
57
56.0
56.0
2.80
53.7
53.7
3.20
51.3
51.3
3.60
49.0
49.0
4.00
45.6
45.6
4.50
42.2
42.2
5.00
38.8
38.8
5.40
80
62
57.9
54.4
2.80
54.9
52.7
3.20
51.9
51.1
3.60
48.9
48.9
4.00
45.5
45.5
4.50
42.2
42.2
5.00
38.8
38.8
5.40
1800
75
62
57.8
45.4
2.80
54.8
44.1
3.20
51.8
42.8
3.60
48.8
41.5
4.00
44.6
39.7
4.50
40.6
37.9
4.90
36.5
36.2
5.40
80
67
63.4
45.0
2.90
60.2
43.8
3.30
57.1
42.5
3.70
54.0
41.3
4.10
49.3
39.4
4.50
44.9
37.7
5.00
40.4
35.9
5.40
80
72
69.1
36.2
2.90
65.7
34.8
3.30
62.4
33.4
3.70
59.0
32.0
4.10
54.1
30.2
4.60
49.4
28.4
5.00
44.6
26.6
5.50
80
57
58.0
58.0
2.80
55.5
55.5
3.20
53.0
53.0
3.60
50.4
50.4
4.00
46.8
46.8
4.50
43.3
43.3
5.00
39.8
39.8
5.40
80
62
58.7
57.7
2.80
55.7
55.6
3.20
52.7
52.7
3.60
49.7
49.7
4.00
46.3
46.3
4.50
43.1
43.1
5.00
39.8
39.8
5.40
2000
75
62
58.7
47.4
2.80
55.6
46.1
3.20
52.6
44.9
3.60
49.5
43.6
4.00
45.2
41.8
4.50
41.0
40.0
5.00
36.8
36.8
5.40
80
67
64.4
47.1
2.90
61.2
45.8
3.30
58.0
44.6
3.70
54.8
43.3
4.10
50.0
41.5
4.50
45.3
39.7
5.00
40.7
37.9
5.40
80
72
70.5
37.6
2.90
66.9
36.2
3.30
63.4
34.7
3.70
59.8
33.2
4.10
54.7
31.3
4.60
49.9
29.5
5.00
45.0
27.7
5.50
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handler
Coil
T.C.
S.C.
KW
Furnace
Coil
T.C.
S.C.
KW
–
FC/MC62
1.00
1.00
1.04
T*(8,L)V*C20
FC/MC62D
0.99
0.99
0.98
1.00
–
FC64
1.02
1.02
1.03
T*(8,L)V*C20
FC64D
1.01
1.01
AHE60D
–
1.00
1.00
1.00
T*(8,L)X*C20
FC/MC62D
1.00
1.00
0.99
MV20D
FC/MC62D
1.01
1.01
1.04
T*(8,L)X*C20
FC64D
1.02
1.02
1.01
MV20D
FC64D
1.02
1.02
1.01
T*9(C,V)*C20
FC/MC62D
0.99
0.99
1.02
MX20D
FC/MC62D
1.00
1.00
0.99
T*9(C,V)*C20
FC64D
1.01
1.01
1.04
MX20D
FC64D
1.02
1.02
1.01
T*9(C,V)*D20
FC/MC62D
0.99
0.99
1.02
T*9(C,V)*D20
FC64D
1.01
1.01
1.04
T*9X*C20
FC/MC62D
1.00
1.00
0.99
T*9X*C20
FC64D
1.02
1.02
1.01
T*9X*D20
FC/MC62D
1.00
1.00
0.99
T*9X*D20
FC64D
1.02
1.02
1.01
24
Y*(8,L)C*C20
FC/MC62D
0.99
0.99
0.98
Y*(8,L)C*C20
FC64D
1.01
1.01
1.00
Y*9C*C20
FC/MC62D
0.99
0.99
1.02
Y*9C*C20
FC64D
1.01
1.01
1.04
Y*9C*D20
FC/MC62D
0.99
0.99
1.02
Y*9C*D20
FC64D
1.01
1.01
1.04
Johnson Controls Unitary Products
700691-YTG-A-0512
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO
EVAPORATOR COIL MODEL NO
AIR TEMP.
ENTERING
OUTDOOR UNIT
YHJR18S41S3
F6FP018
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBH
COP
KW
MBH
COP
KW
MBH
COP
KW
60
22.0
4.0
1.63
23.6
4.3
1.60
25.3
4.7
1.56
70
20.6
3.6
1.69
22.2
3.9
1.66
23.7
4.3
1.63
80
19.2
3.2
1.74
20.7
3.5
1.72
22.2
3.8
1.70
60
18.7
3.6
1.54
18.3
3.7
1.45
18.0
3.8
1.37
70
17.3
3.2
1.57
17.6
3.4
1.53
18.0
3.5
1.49
80
15.9
2.9
1.61
16.9
3.1
1.61
17.9
3.3
1.61
60
16.5
3.3
1.46
17.4
3.5
1.45
18.2
3.7
1.45
70
15.3
3.0
1.49
16.2
3.2
1.50
17.1
3.4
1.50
80
14.0
2.7
1.52
15.0
2.9
1.53
16.0
3.0
1.54
60
13.7
2.9
1.38
14.4
3.0
1.39
15.1
3.2
1.40
70
12.5
2.6
1.38
13.3
2.8
1.40
14.1
2.9
1.41
80
11.2
2.4
1.38
12.1
2.5
1.40
13.0
2.7
1.42
60
10.2
2.4
1.23
10.8
2.5
1.25
11.4
2.6
1.27
70
9.0
2.2
1.22
9.6
2.3
1.24
10.2
2.4
1.27
80
7.8
1.9
1.22
8.4
2.0
1.25
9.0
2.1
1.27
60
7.7
2.0
1.14
8.1
2.0
1.18
8.5
2.1
1.21
70
7.0
1.8
1.14
7.5
1.9
1.18
7.9
1.9
1.21
80
6.4
1.6
1.15
6.9
1.7
1.18
7.3
1.8
1.21
60
47
40
30
17
10
450
600
750
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
Air Handler
Coil
MBH
COP
KW
Furnace
Coil
MBH
COP
KW
AHE18B
–
0.99
0.98
1.01
T*(8,L)V*A12
FC/MC/PC/UC24A
1.00
1.00
1.00
AV*24
–
1.00
1.00
1.00
T*(8,L)V*A12
FC/MC/PC/UC30A
1.00
1.00
1.00
MV12B
FC/MC18B
1.00
1.00
1.00
T*(8,L)V*B12
FC/MC/PC/UC24B
1.00
1.00
1.00
MV12B
FC/MC24B
1.00
1.00
1.00
T*(8,L)V*B12
FC/MC/PC/UC30B
1.00
1.00
1.00
MV12B
FC/MC30B
1.00
1.00
1.00
T*(8,L)X*A12
FC/MC/PC/UC24A
1.00
1.00
1.00
MX12B
FC/MC18B
0.99
0.97
1.02
T*(8,L)X*A12
FC/MC/PC/UC30A
1.00
1.00
1.00
MX12B
FC/MC24B
1.01
0.94
1.07
T*(8,L)X*B12
FC/MC/PC/UC24B
1.00
1.00
1.00
MX12B
FC/MC30B
1.01
0.94
1.07
T*(8,L)X*B12
FC/MC/PC/UC30B
1.00
1.00
1.00
T*9V*A10
FC/MC/PC24A
1.00
1.00
1.00
T*9(C,V)*B12
FC/MC/PC/UC24B
1.00
1.00
1.00
T*9(C,V)*B12
FC/MC/PC/UC30B
1.00
1.00
1.00
T*9X*A10
FC/MC/PC24A
1.00
1.00
1.00
T*9X*B12
FC/MC/PC/UC24B
1.00
1.00
1.00
T*9X*B12
FC/MC/PC/UC30B
1.00
1.00
1.00
Y*(8,L)C*A12
FC/MC/PC/UC24A
1.00
1.00
1.00
Y*(8,L)C*A12
FC/MC/PC/UC30A
1.00
1.00
1.00
Y*(8,L)C*B12
FC/MC/PC/UC24B
1.00
1.00
1.00
Y*(8,L)C*B12
FC/MC/PC/UC30B
1.00
1.00
1.00
Y*9C*B12
FC/MC/PC/UC24B
1.00
1.00
1.00
Y*9C*B12
FC/MC/PC/UC30B
1.00
1.00
1.00
Johnson Controls Unitary Products
25
700691-YTG-A-0512
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO
EVAPORATOR COIL MODEL NO
AIR TEMP.
ENTERING
OUTDOOR UNIT
YHJR24S41S4
F6FP024
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBH
COP
KW
MBH
COP
KW
MBH
COP
KW
60
27.6
4.3
1.91
28.9
4.6
1.86
30.2
4.9
1.82
70
25.9
3.8
1.98
27.2
4.1
1.95
28.5
4.4
1.92
80
24.1
3.4
2.06
25.5
3.7
2.04
26.8
3.9
2.02
60
22.7
3.8
1.75
23.8
4.0
1.74
24.9
4.2
1.72
70
21.4
3.5
1.82
22.4
3.6
1.81
23.4
3.8
1.80
80
20.1
3.1
1.88
21.0
3.3
1.88
21.8
3.4
1.88
60
20.3
3.6
1.67
21.0
3.7
1.67
21.8
3.8
1.67
70
19.1
3.2
1.73
19.8
3.4
1.73
20.5
3.5
1.74
80
17.9
2.9
1.78
18.5
3.0
1.80
19.1
3.1
1.81
60
15.9
3.0
1.56
17.0
3.2
1.57
18.1
3.4
1.58
70
15.4
2.8
1.61
16.2
2.9
1.62
17.0
3.0
1.64
80
14.9
2.6
1.66
15.4
2.7
1.68
15.8
2.7
1.70
60
12.8
2.6
1.43
13.5
2.7
1.45
14.2
2.8
1.48
70
11.7
2.4
1.45
12.2
2.4
1.47
12.7
2.5
1.50
80
10.6
2.1
1.46
10.9
2.2
1.48
11.2
2.2
1.51
60
1.0
0.2
1.91
6.2
1.1
1.61
11.4
2.4
1.39
70
5.0
0.9
1.60
7.6
1.5
1.50
10.2
2.1
1.40
80
9.0
1.9
1.37
9.1
1.9
1.39
9.1
1.9
1.42
60
47
40
30
17
10
600
800
1000
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
Air Handler
Coil
MBH
COP
KW
Furnace
Coil
MBH
COP
KW
AHE22B
–
0.96
0.96
0.87
T*(8,L)X*B12
FC/MC/PC30B
1.00
1.00
1.00
AHE24B
–
0.94
0.99
0.82
T*(8,L)X*B12
UC24B
1.00
1.00
1.00
AHE30B
–
0.94
0.99
0.82
T*(8,L)X*B12
UC30B
1.00
1.00
1.00
AV*24
–
0.94
0.99
0.82
T*9(C,V)*B12
FC/MC/PC24B
1.00
1.00
1.00
MV12B
FC/MC24B
1.00
1.00
1.00
T*9(C,V)*B12
FC/MC/PC30B
1.00
1.00
1.00
MV12B
FC/MC30B
1.00
1.00
1.00
T*9(C,V)*B12
UC24B
1.00
1.00
1.00
MX12B
FC/MC24B
0.99
0.97
1.03
T*9(C,V)*B12
UC30B
1.00
1.00
1.00
MX12B
FC/MC30B
0.99
0.97
1.03
T*9X*B12
FC/MC/PC24B
1.00
1.00
1.00
T*9X*B12
FC/MC/PC30B
1.00
1.00
1.00
Furnace
Coil
MBH
COP
KW
T*9X*B12
UC24B
1.00
1.00
1.00
T*(8,L)V*A12
FC/MC/PC24A
1.00
1.00
1.00
T*9X*B12
UC30B
1.00
1.00
1.00
T*(8,L)V*A12
FC/MC/PC30A
1.00
1.00
1.00
Y*(8,L)C*A12
FC/MC/PC24A
1.00
1.00
1.00
T*(8,L)V*A12
UC24A
1.00
1.00
1.00
Y*(8,L)C*A12
FC/MC/PC30A
1.00
1.00
1.00
T*(8,L)V*A12
UC30A
1.00
1.00
1.00
Y*(8,L)C*A12
UC24A
1.00
1.00
1.00
T*(8,L)V*B12
FC/MC/PC24B
1.00
1.00
1.00
Y*(8,L)C*A12
UC30A
1.00
1.00
1.00
T*(8,L)V*B12
FC/MC/PC30B
1.00
1.00
1.00
Y*(8,L)C*B12
FC/MC/PC24B
1.00
1.00
1.00
T*(8,L)V*B12
UC24B
1.00
1.00
1.00
Y*(8,L)C*B12
FC/MC/PC30B
1.00
1.00
1.00
T*(8,L)V*B12
UC30B
1.00
1.00
1.00
Y*(8,L)C*B12
UC24B
1.00
1.00
1.00
T*(8,L)X*A12
FC/MC/PC24A
1.00
1.00
1.00
Y*(8,L)C*B12
UC30B
1.00
1.00
1.00
T*(8,L)X*A12
FC/MC/PC30A
1.00
1.00
1.00
Y*9C*B12
FC/MC/PC24B
1.00
1.00
1.00
T*(8,L)X*A12
UC24A
1.00
1.00
1.00
Y*9C*B12
FC/MC/PC30B
1.00
1.00
1.00
T*(8,L)X*A12
UC30A
1.00
1.00
1.00
Y*9C*B12
UC24B
1.00
1.00
1.00
T*(8,L)X*B12
FC/MC/PC24B
1.00
1.00
1.00
Y*9C*B12
UC30B
1.00
1.00
1.00
26
Johnson Controls Unitary Products
700691-YTG-A-0512
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO
EVAPORATOR COIL MODEL NO
AIR TEMP.
ENTERING
OUTDOOR UNIT
YHJR30S41S4
F6FP030
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBH
COP
KW
MBH
COP
KW
MBH
COP
KW
60
33.1
4.1
2.35
31.7
4.0
2.30
30.2
3.9
2.25
70
31.6
3.8
2.47
31.4
3.8
2.43
31.1
3.8
2.39
80
30.1
3.4
2.60
31.1
3.5
2.58
32.1
3.7
2.54
60
26.7
3.6
2.18
27.6
3.8
2.15
28.5
3.9
2.13
70
25.5
3.3
2.27
26.3
3.4
2.26
27.1
3.5
2.25
80
24.4
3.0
2.37
25.1
3.1
2.36
25.8
3.2
2.37
60
22.8
3.3
2.03
23.5
3.4
2.03
24.2
3.5
2.02
70
22.1
3.1
2.12
22.8
3.1
2.13
23.5
3.2
2.13
80
21.5
2.8
2.21
22.2
2.9
2.23
22.9
3.0
2.24
60
20.5
3.1
1.94
20.2
3.1
1.92
19.9
3.1
1.90
70
18.9
2.8
1.97
18.8
2.8
1.97
18.7
2.8
1.98
80
17.3
2.5
2.01
17.4
2.5
2.02
17.5
2.5
2.04
60
15.6
2.6
1.73
15.8
2.6
1.75
16.0
2.7
1.77
70
13.4
2.3
1.71
14.2
2.4
1.76
15.0
2.4
1.82
80
11.3
2.0
1.68
12.6
2.1
1.78
14.0
2.2
1.87
60
13.2
2.4
1.64
13.5
2.4
1.67
13.9
2.4
1.70
70
12.0
2.1
1.65
12.3
2.1
1.69
12.5
2.1
1.71
80
10.8
1.9
1.67
11.0
1.9
1.70
11.2
1.9
1.73
60
47
40
30
17
10
800
1000
1200
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
Air Handler
Coil
MBH
COP
KW
Furnace
Coil
MBH
COP
KW
AHE30B
–
0.99
0.98
1.02
T*(8,L)V*B12
FC/MC/PC43B
1.02
1.03
0.99
AHE34C
–
1.00
1.00
1.00
T*(8,L)V*C16
FC/MC/PC43C
1.02
1.03
0.99
AHE36C
–
1.01
0.94
1.07
T*(8,L)X*B12
FC/MC/PC43B
1.02
1.03
0.99
AV*36
–
1.02
0.99
1.03
T*(8,L)X*C16
FC/MC/PC43C
1.02
1.03
0.99
MV12B
FC/MC43B
1.02
0.99
1.03
T*9(C,V)*B12
FC/MC/PC43B
1.02
1.03
0.99
MV16C
FC/MC35C
1.00
1.00
1.00
T*9(C,V)*C16
FC/MC/PC43C
1.02
1.03
0.99
MV16C
FC/MC43C
1.02
0.99
1.03
T*9X*B12
FC/MC/PC43B
1.02
1.03
0.99
MX12B
FC/MC35B
0.99
0.96
1.03
T*9X*C16
FC/MC/PC43C
1.02
1.03
0.99
MX12B
FC/MC43B
1.01
0.94
1.07
Y*(8,L)C*B12
FC/MC/PC43B
1.02
1.03
0.99
Y*(8,L)C*C16
FC/MC/PC43C
1.02
1.03
0.99
Y*9C*B12
FC/MC/PC43B
1.02
1.03
0.99
Y*9C*C16
FC/MC/PC43C
1.02
1.03
0.99
Johnson Controls Unitary Products
27
700691-YTG-A-0512
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO
EVAPORATOR COIL MODEL NO
AIR TEMP.
ENTERING
OUTDOOR UNIT
YHJR36S41S4
F6FP036
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBH
COP
KW
MBH
COP
KW
MBH
COP
KW
60
46.1
4.4
3.07
47.6
4.8
2.90
49.0
4.8
3.02
70
44.0
4.0
3.23
45.5
4.3
3.08
46.9
4.3
3.19
80
42.0
3.6
3.40
43.3
3.9
3.25
44.7
3.9
3.38
60
38.1
4.0
2.82
39.4
4.3
2.70
40.8
4.2
2.86
70
36.1
3.6
2.97
37.4
3.9
2.84
38.7
3.8
3.00
80
34.2
3.2
3.10
35.4
3.5
2.98
36.6
3.4
3.14
60
34.0
3.7
2.72
34.9
3.9
2.60
35.7
3.8
2.76
70
32.2
3.3
2.84
33.2
3.6
2.73
34.2
3.5
2.90
80
30.3
3.0
2.96
31.4
3.2
2.86
32.6
3.1
3.04
60
27.7
3.1
2.59
28.8
3.4
2.48
29.8
3.3
2.64
70
26.5
2.9
2.67
27.4
3.1
2.57
28.2
3.0
2.75
80
25.3
2.7
2.74
26.0
2.9
2.65
26.6
2.7
2.86
60
21.5
2.7
2.36
22.2
2.9
2.28
23.0
2.7
2.46
70
20.2
2.5
2.40
20.9
2.7
2.31
21.6
2.5
2.51
80
19.0
2.3
2.44
19.6
2.4
2.36
20.3
2.3
2.56
60
18.7
2.5
2.23
19.3
2.6
2.17
19.9
2.5
2.37
70
17.2
2.2
2.25
17.8
2.4
2.18
18.5
2.3
2.40
80
15.7
2.0
2.26
16.3
2.2
2.20
17.0
2.1
2.41
60
47
40
30
17
10
1000
1200
1400
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
Air Handler
Coil
MBH
COP
KW
Furnace
Coil
MBH
COP
KW
AHE34C
–
1.00
1.00
1.00
T*(8,L)V*C16
FC/MC/PC43C
1.02
1.06
0.96
AHE36C
–
1.02
0.97
1.05
T*(8,L)V*C20
FC/MC/PC43C
1.02
1.06
0.96
AV*36
–
1.03
1.00
1.06
T*(8,L)X*C16
FC/MC/PC43C
1.02
1.06
0.96
MV16C
FC/MC35C
1.00
1.00
1.00
T*(8,L)X*C20
FC/MC/PC43C
1.02
1.06
0.96
MV16C
FC/MC43C
1.03
1.00
1.06
T*9(C,V)*C16
FC/MC/PC43C
1.02
1.06
0.96
MX12B
FC/MC35B
1.00
0.99
1.01
T*9(C,V)*C20
FC/MC/PC43C
1.02
1.06
0.96
MX12B
FC/MC43B
1.02
0.99
1.03
T*9X*C16
FC/MC/PC43C
1.02
1.06
0.96
MX16C
FC/MC43C
1.00
0.95
1.05
T*9X*C20
FC/MC/PC43C
1.02
1.06
0.96
Y*(8,L)C*C16
FC/MC/PC43C
1.02
1.06
0.96
Y*(8,L)C*C20
FC/MC/PC43C
1.02
1.06
0.96
Y*9C*C16
FC/MC/PC43C
1.02
1.06
0.96
Y*9C*C20
FC/MC/PC43C
1.02
1.06
0.96
28
Johnson Controls Unitary Products
700691-YTG-A-0512
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO
EVAPORATOR COIL MODEL NO
AIR TEMP.
ENTERING
OUTDOOR UNIT
YHJR42S41S4
F6FP042
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBH
COP
KW
MBH
COP
KW
MBH
COP
KW
60
47.6
4.6
3.01
47.5
4.7
2.96
47.5
4.8
2.92
70
46.0
4.3
3.17
46.4
4.3
3.14
46.7
4.4
3.11
80
44.4
3.9
3.34
45.2
4.0
3.31
46.0
4.1
3.29
60
41.6
4.3
2.85
42.2
4.4
2.83
42.9
4.5
2.82
70
39.8
3.9
2.97
40.7
4.0
2.98
41.6
4.1
2.98
80
38.0
3.6
3.11
39.1
3.7
3.12
40.3
3.8
3.13
60
37.8
4.1
2.73
38.9
4.2
2.74
39.9
4.3
2.75
70
36.1
3.7
2.85
37.1
3.8
2.86
38.1
3.9
2.87
80
34.4
3.4
2.97
35.4
3.5
2.98
36.4
3.6
2.99
60
32.1
3.7
2.57
32.5
3.7
2.59
32.8
3.7
2.60
70
30.6
3.4
2.68
31.2
3.4
2.69
31.8
3.4
2.71
80
29.1
3.1
2.78
29.9
3.1
2.80
30.8
3.2
2.83
60
25.9
3.1
2.43
26.5
3.2
2.45
27.2
3.2
2.48
70
24.4
2.9
2.48
25.1
2.9
2.52
25.7
3.0
2.54
80
23.0
2.6
2.55
23.6
2.7
2.57
24.3
2.7
2.60
60
21.9
2.8
2.26
21.8
2.8
2.30
21.7
2.7
2.33
70
19.7
2.5
2.28
20.0
2.5
2.32
20.3
2.5
2.36
80
17.5
2.2
2.29
18.2
2.3
2.34
18.9
2.3
2.38
60
47
40
30
17
10
1200
1400
1600
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
Air Handler
AHE42D
AHE48D
AV*48
AV*60
MV16C
MV16C
MV20D
MV20D
MX16C
MX16C
MX20D
MX20D
Coil
–
–
–
–
FC/MC48C
FC60C
FC/MC48D
FC/MC60D
FC/MC48C
FC60C
FC/MC48D
FC/MC60D
MBH
0.98
0.96
0.98
0.98
1.00
0.98
1.00
0.98
0.98
0.98
0.98
0.98
COP
0.98
0.97
0.98
0.98
1.00
0.98
1.00
0.98
0.98
0.98
0.98
0.98
KW
1.00
0.99
1.00
1.00
1.00
1.00
1.00
1.00
0.99
1.00
1.00
1.00
Continued on next page.
Johnson Controls Unitary Products
29
700691-YTG-A-0512
Furnace
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*C16
T*9X*C16
T*9X*C16
30
Coil
FC/MC/PC48C
FC/PC60C+TXV
UC48C
UC60C
FC/MC/PC48C
FC/PC60C+TXV
UC48C
UC60C
UC60C+TXV
FC/MC/PC48C
FC/PC60C
FC/PC60C+TXV
UC48C
UC60C
UC60C+TXV
FC/MC/PC48C
FC/PC60C
FC/PC60C+TXV
UC48C
UC60C
UC60C+TXV
FC/MC/PC48C
FC/PC60C+TXV
UC48C
UC60C
FC/MC/PC48C
FC/PC60C
FC/PC60C+TXV
UC48C
UC60C
UC60C+TXV
FC/MC/PC48D
FC/MC/PC60D
FC/MC/PC60D+TXV
UC48D
UC60D
UC60D+TXV
FC/MC/PC48C
FC/PC60C
FC/PC60C+TXV
MBH
0.98
0.96
0.98
0.96
0.98
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.98
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
COP
1.01
1.00
1.01
1.01
1.01
1.00
1.01
1.01
1.01
1.00
1.00
1.00
1.00
1.01
1.01
1.00
1.00
1.00
1.00
1.01
1.01
1.01
1.00
1.01
1.01
1.01
1.01
1.00
1.01
1.01
1.00
1.01
1.01
1.01
1.01
1.00
1.01
1.00
1.01
1.01
KW
0.97
0.98
0.97
0.97
0.97
0.98
0.97
0.97
0.97
0.98
0.98
0.98
0.98
0.97
0.97
0.98
0.98
0.98
0.98
0.97
0.97
0.97
0.98
0.97
0.97
0.97
0.97
0.98
0.97
0.97
0.98
0.97
0.97
0.97
0.97
0.98
0.97
0.98
0.97
0.97
Furnace
T*9X*C16
T*9X*C16
T*9X*C16
T*9X*C20
T*9X*C20
T*9X*C20
T*9X*C20
T*9X*C20
T*9X*C20
T*9X*D20
T*9X*D20
T*9X*D20
T*9X*D20
T*9X*D20
T*9X*D20
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*C16
Y*9C*C16
Y*9C*C16
Y*9C*C16
Y*9C*C20
Y*9C*C20
Y*9C*C20
Y*9C*C20
Y*9C*C20
Y*9C*C20
Y*9C*D20
Y*9C*D20
Y*9C*D20
Y*9C*D20
Y*9C*D20
Y*9C*D20
Coil
UC48C
UC60C
UC60C+TXV
FC/MC/PC48C
FC/PC60C
FC/PC60C+TXV
UC48C
UC60C
UC60C+TXV
FC/MC/PC48D
FC/MC/PC60D
FC/MC/PC60D+TXV
UC48D
UC60D
UC60D+TXV
FC/MC/PC48C
FC/PC60C+TXV
UC48C
UC60C
FC/MC/PC48C
FC/PC60C+TXV
UC48C
UC60C
UC60C+TXV
FC/MC/PC48C
FC/PC60C+TXV
UC48C
UC60C
FC/MC/PC48C
FC/PC60C
FC/PC60C+TXV
UC48C
UC60C
UC60C+TXV
FC/MC/PC48D
FC/MC/PC60D
FC/MC/PC60D+TXV
UC48D
UC60D
UC60D+TXV
MBH
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.98
0.96
0.98
0.96
0.98
0.96
0.96
0.98
0.96
0.98
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
0.98
0.96
0.96
COP
1.00
1.00
1.00
1.00
1.01
1.01
1.00
1.00
1.00
1.00
1.01
1.00
1.00
1.01
1.01
1.01
1.01
1.01
1.00
1.01
1.01
1.01
1.00
1.00
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.00
1.01
1.01
1.00
1.01
1.01
1.01
KW
0.98
0.98
0.98
0.98
0.97
0.97
0.98
0.98
0.98
0.98
0.97
0.98
0.98
0.97
0.97
0.97
0.97
0.97
0.98
0.97
0.97
0.97
0.98
0.98
0.97
0.97
0.97
0.97
0.97
0.97
0.97
0.97
0.97
0.98
0.97
0.97
0.98
0.97
0.97
0.97
Johnson Controls Unitary Products
700691-YTG-A-0512
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO
EVAPORATOR COIL MODEL NO
AIR TEMP.
ENTERING
OUTDOOR UNIT
YHJR48S41S4
F6FP048
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBH
COP
KW
MBH
COP
KW
MBH
COP
KW
60
54.5
4.7
3.42
53.4
4.7
3.36
52.4
4.6
3.31
70
53.4
4.3
3.68
53.5
4.3
3.64
53.6
4.4
3.60
80
52.4
3.9
3.93
53.6
4.0
3.92
54.9
4.1
3.89
60
48.5
4.4
3.26
49.5
4.4
3.27
50.5
4.5
3.28
70
46.4
3.9
3.45
47.2
3.9
3.54
48.1
3.9
3.64
80
44.2
3.6
3.63
44.9
3.5
3.81
45.6
3.3
4.00
60
43.1
4.0
3.14
44.2
4.1
3.15
45.2
4.2
3.16
70
40.0
3.6
3.25
41.6
3.7
3.30
43.2
3.8
3.34
80
36.9
3.2
3.37
39.1
3.3
3.45
41.3
3.4
3.52
60
36.4
3.6
2.97
37.2
3.7
2.99
38.1
3.7
3.01
70
34.5
3.3
3.09
35.4
3.3
3.12
36.2
3.4
3.16
80
32.7
3.0
3.21
33.5
3.0
3.25
34.3
3.1
3.29
60
28.9
3.2
2.66
29.5
3.2
2.70
30.2
3.2
2.74
70
27.3
2.9
2.78
27.7
2.9
2.79
28.1
2.9
2.81
80
25.8
2.6
2.89
25.9
2.6
2.88
26.0
2.7
2.88
60
24.8
2.8
2.62
25.3
2.8
2.69
25.9
2.8
2.75
70
23.1
2.5
2.71
23.6
2.5
2.76
24.1
2.5
2.82
80
21.4
2.3
2.79
21.8
2.3
2.84
22.3
2.3
2.90
60
47
40
30
17
10
1400
1600
1800
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
Air Handler
AHE48D
AHE60D
AV*48
AV*60
MV20D
MV20D
MX20D
MX20D
Coil
–
–
–
–
FC/MC60D
FC/MC62D
FC/MC60D
FC/MC62D
Johnson Controls Unitary Products
MBH
0.98
0.98
1.00
1.00
1.00
1.00
0.99
0.98
COP
1.01
0.98
1.00
1.00
1.00
1.00
0.96
0.96
KW
0.97
1.00
1.00
1.00
1.00
1.00
1.03
1.01
Furnace
T*(8,L)V*C20
T*(8,L)X*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9X*C20
T*9X*D20
Y*(8,L)C*C20
Y*9C*D20
Y*9C*C20
Coil
FC/MC62D
FC/MC62D
FC/MC62D
FC/MC62D
FC/MC62D
FC/MC62D
FC/MC62D
FC/MC62D
FC/MC62D
MBH
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
COP
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
KW
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
31
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO
EVAPORATOR COIL MODEL NO
AIR TEMP.
ENTERING
OUTDOOR UNIT
YHJR60S41S4
AHX60
ID CFM
AIR TEMP.
ENTERING
INDOOR COIL
MBH
COP
KW
MBH
COP
KW
MBH
COP
KW
60
65.7
4.1
4.70
66.7
4.2
4.65
67.6
4.3
4.61
70
64.7
3.7
5.12
65.4
3.8
5.04
66.1
3.9
4.97
80
63.8
3.4
5.50
64.1
3.5
5.37
64.5
3.6
5.25
60
56.9
3.8
4.39
57.4
3.9
4.31
58.0
4.0
4.25
70
55.8
3.4
4.81
56.3
3.5
4.71
56.8
3.5
4.76
80
54.7
3.1
5.17
55.2
3.1
5.22
55.6
3.2
5.09
60
51.9
3.5
4.35
51.7
3.5
4.33
51.4
3.5
4.30
70
50.6
3.1
4.78
51.1
3.2
4.68
51.7
3.2
4.74
80
49.3
2.8
5.16
50.6
2.9
5.11
51.9
3.0
5.07
60
44.1
2.6
4.97
43.6
2.5
5.11
43.1
2.5
5.05
70
45.3
2.9
4.58
44.8
2.9
4.53
44.4
2.8
4.65
80
46.5
3.2
4.26
46.1
3.2
4.22
45.6
3.2
4.18
60
36.6
2.2
4.88
36.8
2.2
4.90
36.9
2.2
4.92
70
36.0
2.4
4.40
36.5
2.4
4.46
37.1
2.4
4.53
80
35.3
2.6
3.98
36.3
2.6
4.09
37.3
2.7
4.05
60
27.3
1.7
4.71
27.7
1.7
4.78
28.1
1.8
4.58
70
30.4
2.0
4.45
31.2
2.1
4.35
32.0
2.2
4.26
80
33.4
2.4
4.08
34.7
2.5
4.07
35.9
2.7
3.90
60
47
40
30
17
10
1600
1800
2000
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
Air Handler
–
–
AHE60D
MV20D
MV20D
MX20D
MX20D
Coil
FC/MC62
FC64
–
FC/MC62D
FC64D
FC/MC62D
FC64D
MBH
0.99
0.99
1.00
0.99
0.99
0.99
1.00
COP
0.98
1.00
1.00
0.99
1.01
1.01
1.04
KW
1.02
0.99
1.00
1.00
0.98
0.98
0.97
Furnace
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*C20
T*9X*C20
T*9X*D20
T*9X*D20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*C20
Y*9C*C20
Y*9C*D20
Y*9C*D20
Subject to change without notice. Published in U.S.A.
Copyright © 2012 by Johnson Controls, Inc. All rights reserved.
York International Corp.
5005 York Drive
Norman, OK 73069
Coil
FC/MC62D
FC64D
FC/MC62D
FC64D
FC/MC62D
FC64D
FC/MC62D
FC64D
FC/MC62D
FC64D
FC/MC62D
FC64D
FC/MC62D
FC64D
FC/MC62D
FC64D
FC/MC62D
FC64D
MBH
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
COP
0.98
1.01
1.00
1.02
0.97
0.99
0.97
1.00
0.98
1.01
0.99
1.02
0.98
1.01
0.97
0.99
0.97
1.00
KW
1.02
0.99
0.99
0.97
1.02
1.00
1.02
0.99
1.01
0.98
1.00
0.97
1.02
0.99
1.02
1.00
1.02
0.99
700691-YTG-A-0512
Supersedes: 550576-YTG-C-1111
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising