Pfaff 285 Instruction book
Pfaff 285 is a versatile sewing machine well suited for a wide range of sewing projects. Its adjustable stitch length and width allow for precise control over the appearance of your stitches, while its variety of presser feet make it easy to handle different fabrics and techniques. With its strong motor and durable construction, Pfaff 285 can effortlessly sew through multiple layers of fabric and is a great choice for both beginners and experienced sewers. Some of the key features of Pfaff 285 include:
- Adjustable stitch length and width
- Variety of presser feet
- Strong motor and durable construction
Advertisement
Advertisement
Instruction Book
CPFAFFD®
284
—
44t
CPFAFFI
285
InstructioflS
284 and 285
Foreword
Your new Plait sewing machine will enable
YOU to master a large variety mbroideriflg and darning
1 of sewing easily and quickly This piled in instruction book has been com order to familiarize YoU thoroughly with all the sewing lobs coming up in a ho me.
We suggest that you try out the various ing techniques discussed in this book sew so that you will become well acquainted with your machine.
If You have any do not hesitate to sewing contact problems your Pfaff please dealer who will be glad to help you at any lime.
We hope yOU with your Pt alt.
will always enjoy sewing
PFAFFHaUshautmaen GmbH
KarlsruheDUrtach
—
—..-—---—.———
—
,_.-._.t_,’_—. —.
Needle and Thread
Chart
Type of Fabric
Bed linen
FIne linen
Muslin
Dress fabrics, auth as brocade, satin ottoman, taffeta, georgette, crêpe, chIffon, batisto, blouse fabrics and poplin shining
Suitings and mantlings
Twill, denIm
Heavy linen
Burlap
Terry cloth, chenille goods, knitted pile fabric for bathrobes, corduroy
Cotton, rayon staple fabrics
Jersey fabrics (synthetIc)
Lasiex, Helanca fabrics
Foambacks
Jersey fabrics (wooll
Woolens
Colton curtains
Synthetic curtains
Acetia, leatherette, oIlcloth
Elastic corsetry fabrics, Firm corsetry fabrics, corset satin
Leather
Decorative stitching
Type
Thread
Cotton
Size
50 or 60
Size
80
70— 80
70-80
Silk diin cotton
Silk or
Cotton
Cotton
Cotton or linen
Linen
Cotton
— —
Silk
Cotton
Synthetic
Cotton
Synthetic
Silk
—
100/3
—
60-80
100/3
40
40—SO
30
—
40
40
50
—---———-—
100/3
50
—
60
70—120
-
70
—
80
—
90
80
—
100
80—100
90
—
70
—
90
70
—
80
70
—
80
-—-----
— Silk
Silk
Merceoon
Mercerized cotton
Synthetic thread
——-
Cotton
Synthetic thread
Cotton
—
Cotton
Linen
Embroidery thread
Heavy embroidery thread
Buttonhole silk
Embroidery and darning thread
Silver-gold thread
Silver lhread
—
40—60
•—•70
40—60
70
—
90
70
—
80
100/3 80
60
—
70—90
60
— ioo
80 70
70
—
—
80
80
60 80—90
60
40
30
40
30— 50
70—90
70—90
70 go
—
90
—
100
-
—-O
50
80
100
70
70
—
60
60
Needle
Point Style
130/706 or
1301705 H
130/705 H
130/705 H
130/706 or 1301705 H
130/705 H
130/705
130 suk
130 PCL
1301705H l3OLr
130/705 or
130/705 H
/
-----
-,—‘-‘j --—---------
Essential Parts of Your Pt afi 284
-.
2
1 2345
17—L:
16
15
/ t: j
23
19 EiFAWl284
I
10
•11
1 Face cover
2 Take-up lever
3 Thread guide
4 Top cover
5 Thread retainer stud
6 Spool pins
7 Bobbin winder
8 Balance wheel
9 Stop motion knob
10 Motor disengaging mechanism
11 Stitch length control
12 Reverse feed control
13 Bed cover
14 Transverse rotary hook
15 Needle plate
16 Sewing foot thumb screw
17 Light switch
18 Stitch width control
19 Needle position lever
20 Presser bar lifter
(on back of machine arm)
21 Needle thread tension
22 Needle set screw
23 Sewing foot
12
Es
11
Essential Parts of Your Pfaff 285
16
5
14
2
U
9
18
22
‘VV
-
V
1
285
1 0
12
1 Face cover
2 Takeup lever
3 Thread guide
4 Thread retainer stud
5 Top cover
6 Spool pins
7 Bobbin winder
8 Balance wheel
9 Stop motion knob
10 Motor disengaging mechanism
11 Stitch length control
12 Reverse feed control
13 Free arm
14 Free arm cover
(enclosing transverse rotary hook)
15 Needle plate
16 Sewing foot thumb screw
17 Light switch
18 Stitch width control
19 Needle position lever
20 Presser bar lifter
(on back of machine arm)
21 Needle thread tension
22 Needle set screw
23 Sewing foot
-fl.,
—
—V’ -
3
-.
V
-
VV
-
V
—--.Vz.-t.
4
Preparing Your Machine for Sewing if your machine is equipped with a built-In motor, push plug A into the receptacle on the machine and the plug at the other end of the cord into the wal’ outlet.
if you have a treadle machine, push the plug of the sewlight cord into the wall outlet.
Mount the belt.
To switch on the sewlight, push the button on the face cover (see ill.).
Place the foot control within easy reach of your foot and depress the pedal. The harder you press, the faster the machine will run.
The builton motor and plastic foot control. Oper ation of both foot controls is the same.
28
of icr in.
ith er
10—
Machines equipped with built-in motor have a mechanism
for
engaging and disengaging the motor. This is operated by a lever (10) underneath the balance wheel. To engage the motor, flick this lever down. After you have completed sewing, flick it to its top position.
With the motor swung out of engagement, all machines fitted with a treadle mechanism can be driven by
toot power.
5
(
To remove the bobbin case, rotate the ba lance wheel until the needle is at the top of its stroke.
On the Pfatl 284, remove bed cover (13), as illustrated. Lift latch k on the bobbin case and pull out the bobbin case with the bob bin.
The bobbin cannot fall out as tong as you hold the case by its open latch. When you release the latch, the empty bobbin drops out.
On the Pfaft 285, the bobbin case is remov ed just like on the Pfaff 284. To get at the bobbin case, however, you must first open free arm cover (14) by swinging it toward the left.
6
For bobbin winding, disengage the sewing mechanism.
Hold balance wheel (8) while turning stop motion knob (9) toward you
(see ill.).
To engage the sewing mechanism after the bobbin has been wound, turn the stop mo lion knob away from you (as indicated by an arrow in the ill.).
Pass the thread around the thread retainer stud in the direction indicated by an arrow.
Place a bobbin on the bobbin winder spindle, making sure that key A at its base enters slot B in the bobbin (see ill.). Wind a few turns of thread on the bobbin and push the bobbin toward the right. Start the ma chine. When the bobbin is full, it is pushed toward the left and can be removed from the spindle.
k-A r
-.
-.
..
.—.: -‘- - .—.- ———.—- -.-----——
-.--..
5_
7
.
-..
Hold the lull bobbin so that the thread un winds toward the right and place it in the bobbin case (1).
Pull the thread into slot (2) and under spring
(3).
As you pull the thread, the bobbin should rotate clockwise (4).
Leave about three inches of thread hanging from the bobbin case.
-
-._--v.-
-—--.
-
—-.—--.
.-
,.
.,
8
Ii
I
To Insert the bobbin case into the machine, rotate the balance wheel until the needle is at its highest point. Lift the latch and place the bobbin case on center stud s (see ill.), making sure its slot (white arrow) points up. Release the latch and press against the bobbin case until you hear place.
it snap into
Ptaff 285
9
1
To enlarge the sewing area of the Pfaif 285 for .ordinary
sewing operations, push the go (1). Then lock it in place by turning down the lever on the back of the machine (2) until the locking stud snaps into the hole in the free arm. Press the workplate support against the machine base until it snaps into place (3).
To remove the workplate, swing up its sup port and unlock t by pulling out and swing ing up the lever on the back of the machine
(see arrow in Fig. 2).
2
On machines having no carrying case base, the workplate support is pressed against the baseplate of the machine.
10
3
(4).
3
3
JL Upper threading is illustrated opposite.
Please note that the thread is placed be tween any two of the discs of tension (21), pulled clockwise around the tension stud and drawn toward the right with a jerk (see ill.).
As you do this, hold the thread steady somewhere between the spool and the ten sion. Thread the needle from front to
back.
IL
21
21
11
--
— ..-.-
-
:-
— r--.—
-——
The sewing foot is raised and lowered by operating the presser bar litter on the back of the machine (see ill.).
A
=
Presser bar lifter up
B
=
Presser bar lifter down
To draw up the bobbin thread, hold the needle thread and lower the sewing foot.
Turn the balance wheel toward you a full turn. Pull the needle thread to draw up the bobbin thread. Place both threads back un der the sewing foot after it has been raised again.
12
Fundamentals of Machine Operation
For ordinary sewing, needle position
(19) should be in its center position.
lever
2
CPFAFFD
• —•j.
.
—.
-
• -——•——.•
-,— ,• —•--—.-——,---
..----.
., —‘
-
- -•
..
-V.—
-•-••----,
-.
— _-
-
•“
.—.
—.
- —-,-
— -
—
.•
—)you make firm
13
___.-_4 4_
•
Begin by sewing a straight-stitth seam. To this end, push the stitch width control to the right as far as it will go.
—
..- ..-.-— -.&‘t-(.
W_
--
...-.....--
.---
-
..‘.—..‘-r’—.--.
‘---;,
The stitch length is regulated by turning the stitch length control. The number indi cating the stitch length chosen should be opposite the notch on the left-hand side of the slot. For ordinary sewing operations, set the stitch Ienght control on “2”.
Place the material under the sewing foot and lower the presser bar lifter.
Place the foot control within easy reach of your foot and depress the pedal. The hard er you press, the faster the machine will run.
14
To sew in reverse or backtack tL3 end of a seam, simply depress the fingertip control.
The stitch width is regulated by pushing the stitch width control toward the left, as may be desired.
Various zigzag sewing operations are dis cussed on page 25 and the following pages.
15
Balanced tensions are essential for sewing.
Both tensions are correctly balanced if the needle and bobbin threads interlock in the center of the material.
The bobbin thread tension is regulated by turning the small knurled screw on the bobbin case. Turn this screw right for tighter tension, or left for a looser tension.
a
If the same size threads are used in the needle and on the bobbin, there is no need to adjust the bobbin thread tension. This tension is set correctly if a slight resistance has to be overcome when pulling the thread.
Numbers 0 to 10 indicate different degrees of tension on the upper tension dial. The higher the number, the tighter the tension.
For ordinary sewing operations, the upper tension should be set at about 5.
bottom
Upper tension too tight or lower tension loose.
to bottom top
Upper tension too loose or lower tensic too tight.
bottom top
*
The accessory box which belongs contains several sewIng to your
feet for
To change the to its highest screw 16 tached in the reverse order.
tilt foot is at
For elastic fabrics, use ordinary
No. 93-100 179-00.
sewing foot foot
-—.-
— needle bar the sewing
22 and pull clamp.
as far as it side of its
Tighten screw
Use needles of the systems indicated in the
17
— .‘—.—.——;.——#—,
—
— —
.
-
-.
-—-—
,—.‘-—--,,.
—.
—
.
—
..
—.——
—.-..—
.—.—
—‘..—
/
/
18
Attaching the Embroidery and Darning Plate
Embroidery and darning plate
No. 93-030 125-45
Darning
To prepare your machine ceed as follows: for darning, pro
For certain sewing operations, feed must be the machine rendered inactive.
For this is included in the accessories plate of your Pfaff
Bring the needle to its highest point.
Remove pull forward.
Place the embroidery and and ill.).
On the Pfaff 285 it is not necessary to remove darning plate into the corresponding of the needle plate.
cutouts in front
Darning foot
No. 93-106 103-91
Replace the ordinary sewing toot by darn it from the rear so that spring clip c rests set screw (22). Tighten sewing on needle
/
Darning sheer and soft hoops.
while the forth across the hole
Make sure the threads and forth over short stitches.
by placing
Draw up first the the stitches materials is greatly them in darning bobbin thread and are being made.
stitching back and in sewing direction.
are anchored in the
Turn the fabric at right angles and sew back work with
Select the darning hoops in a size malch break, the upper
E
19
Zipper Insertion
Attach zipper foot without quilting gauge (which can be obtained from your Pfaff dealer).
Stitch length: 1.5 to 2
Baste closed zipper on the fabric, then open it. Stitch close to the left edge of the zipper for about 1 inch, guiding the right edge of the foot along the zipper teeth (1). Leave the needle in the material, raise the zipper foot and close the zipper (2).
Continue stitching until you reach the end of the zipper. Then stitch across this end (3) and up the other side.
The finished zipper closure is shown in Fig. 4.
2 3 4
20
Flat Felled Seams
Attach felling foot
No. 93-847 561-00
Stitch length: 1.5 to 2
Flat felled seams are used to durably join two pieces of fabric and are usually straightstitched.
First seam: Lay pieces together with the right sides facing and the bottom piece pro truding about /a inch. Make sure the fabric enters the felling foot evenly and the bot tom fabric is folded over the edge of the top piece (see ill, at left), but the top piece is not folded.
Open the two pieces.
Second seam: Lightly tension the fabric by pressing it against the needle plate in front of the foot. Insert the seam ridge into the felling foot and stitch down (see ill, at right).
Quilting
Use zipper loot No.
93-847 600-00 with quilting gauge for sewing parallel seams over the entire surface of the fabric.
21
22
-.
Hemming
847 5a1
Ii
Attach hemmer foot
No. 93-847 551-00
(whict’ can be obtained from your Pfa!f dealer).
Stitch length: 1.5 to 2
-..
—.--.,--
-s
Fold the beginning of the fabric edge twice, making a hem about 78 inch wide and seve ral inches long. Place the material under the hemmer foot and lower the same. Make 3
In 4 straight stitches to secure the folded edge in place.
Draw the fabric into the hemmer by pulling both threads backwards, as shown in the drawing.
Feed the fabric edge into the hemmer foot scroll with, your right hand (see ill.), making sure that the scroll is well filled with fabric at all times and the fabric does not slip side ways under the right half of the foot.
To produce an elastic hem on soft fabrics, use zigzag stitches. Set the stitch width, as instructed on p. 25.
.‘—.- .
.-----
...:•,-
—-., —
Cording
Cording is made with two needle threads.
When threading the needles, make sure to lead each thread between a separate pair of tension discs (see ill.),
To render your cording more prominent, insert a filler cord.
Select the twin needle gauge and the size of the filler cord to suit the type of material used.
Lace the filler cord through hole g, as illus trated. Hold both needle threads :ghtly and rotate the balance wheel to draw up the bobbin thread.
The smallest distance between cording seams made with the ordinary sewing foot is abt.
1/4 inch. For narrower cording, use one of the cording feet listed below.
To make different size cording, the fol lowing twin needles and cording feet can be supplied at extra cost.
Use ordinary sewing foot No. 93-838 954-00, and insert a twin needle (which can be ob tamed from your Pfaff dealer).
Stitch length: 1.5 to 2
Pfaff 285
Twin needles for needle distances of 1.2
(3/44),
1.6
(1/16”), 1.8, 2.0
(/o4”),
2.5
(/32”),
3.0
and 4.0
(/32’) mm.
Cording toot No.
93-847 671-00 with 3 grooves is used for heavy materials, grooves for medium-heavy fabrics, and cording foot No.
93-847 680-00 with 7 grooves for lightweight materials.
cording foot No.
93-847 675-00 with 5
—-..
...
--.-,.
...-,-
.--
.-.-
— .—..-
-‘-—..-.-.
.-
It
Pfaff 284
23
7,
Hemstitching
Stitch length: 2 to 2.5
Clear-view sewing foot
No. 93-100 179-00
Use a thread which is not too heavy and matches the material being hemstitched (pref erably a No. 50 embroidery thread).
Insert a System 130 Zwi-Ho needle.
Make sure the needle and bobbin threads are the same size. The threading procedure is the same as for cording work. Slightly in crease the needle thread tension. The hemstitching effect is produced by the left wing needle penetrating the fabric.
Turn the fabric by half a turn and sew the second seam, guiding the material so that the wing needle enters the needle holes it has made in the fabric previously.
You can produce a nice hemstitching effect atorcg the hemmend edge of the fabric by guiding the material so that the wing needle follows the hemline and the ordinary needle stitches into the fabric close to the hem.
Hemstitching effect obtained with a stitch width of 2 mm.
24
I.
Zigzag Stitching
The stitch width is regulated by pushing the stitch width control toward the left, as may be desired.
Never change the stitch width setting unless the needle is outside the fabric.
The stitch length is regulated by turning the stitch length control. (See ill.).
Overcasting Edges with Zigzag Stitches
838 934
Attach ordinary sewing foot
No. 93-838 954-00
Stitch length: 2
To overcast the edges of light and mediumweight fabrics, set the machine for its maxi mum stitch width.
Soft and flimsy fabrics are best overcast with a zigzag stitch of medium width.
Make sure the needle takes one stitch into the fabric and the other over its edge. This will cover the fabric edge securely.
/
7
25
Inserting Patches
—
38?3.1
Attach ordinary sewing foot
No. 93-838 954-00.
u
I
Larger holes can be patched quickly. Trim away the ragged edges around the hole, cutting exactly along the fabric yarns.
Cut a patch about inch larger than the its grain to that of the fabric.
Set the stdch length control on “1’ and the stitch width control in the middle of its slot and stitch along the edge of the patch.
Set the stitch length control on 0.5’ and the stitch width control at the extreme left of its slot and sew over first seam.
At the corners, stop the machines with the needle down in the material on the right of its throw. Then turn the fabric so that the corners are stitched twice (see ill.).
Trim away the excess material on the wrong side.
Elastic manner.
materials are patched in the same
28
Inserting Lace
Attach ordinary sewing foot
Place the tace on the material and stitch it down with straight stitches made with a stitch length of ‘1.5
on both sides (1).
Cut the fabric open under the lace insertion
(2) and iron it on both sides of the lace.
Sew over the edges of the lace with short zigzag stitches of medium width (4). Trim the fabric edges away on the wrong side.
28
Changing the Needte F’osition
Some special sewing jobs are made with the needle switched to the right or left of the needle plate slot. This is done by mov ing lever (19) to the right and left, respec tively.
The needle position lever is indispensable for sewing buttonholes.
-
CPFAFFD
—
—
1-
Lever at left t center right
Sewing Buttonholes
4
Attach all-purpose sewing foot
No. 93-1 00 179-00
Flick the needle to its left position and put the stitch width control in notch R 1 (see
Figs. 2 and 3).
When using No. 50 embroidery thread, set the stitch length control so that the white dot is opposite the groove (see Fig. 4).
For heavier threads, slightly increase the stitch length.
To obtain more prominent buttonholes, place a filler cord of medium size in the left groove of the sewing foot.
For sewing buttonholes, you can obtain buttonhole sewing foot No.
94-847 616-00 from your dealer.
3
R2
4
Ri
4
2
CPFAFFD
29
30
Sew the first seam over
When the buttonhole of its throw (1).
is the filler cord.
the right length, leave the needle in the fabric on the right
Lift the sewing foot, turn the fabric around clockwise by half a turn, place the filler cord around the needle and pull it for ward, placing it in the left groove of the foot (2).
Lower the foot and let the needle descend on the left of its throw (3).
Move stitch width control (18) to the sec ond notch H 2, make 4 to 6 bartack stitch es, slightly holding the material to reduce the length of bar (4).
Push stitch width control (18) back to the first notch R 1 and sew the second but tonhole seam, stopping about from the end of the first seam.
‘/i inch
Push stitch width control (18) to the second notch R 2 and sew the second tack, slightly holding the material to reduce the length of bar. Flick the stitch width control all the way to the right and make 3 to 4 fastening stitches.
Trim both the sewing and filler threads (5).
Open the buttonhole with your seam rip per. Be careful not to injure the bartacks.
A seam ripper (No. 99-053 016-91) can be obtained from your dealer.
Button Sewing
30 100139 Attach clear-view sewing foot
No. 93100 179-00
Right needle position
Attach embroidery and darning plate.
Place the button under the foot and align so that needle will enter the right hole (see ill).
Raise the needle, but retain the foot in its lowered position. Regulate the stitch width until the needle alternately stitches through both holes. Sew on the button.
Move the stitch width control toward the right and make two or three tying stitches.
Monogram Embroidery
Use darning foot No.
93-106 103-91 and darning plate No. 93-030 125-25.
Regulate the stitch width to suit the size of the monogramm.
Remove the sewing foot, attach the embroi dery and darning plate and lower the press er bar lifter. Trace the monogram on the fabric.
Let the needle stitch into the fabric at the beginning of the design and draw the bob bin thread up through the fabric. Hold both thread ends and start your machine.
Slowly move the hoops in ‘writing direc tion, without turning them, while the ma chine is running at high speed.
31
Apptique Work
93 OOI7
Attach clear-view sewing toot
No. 93-100 179-00
To make appliqué, proceed as follows:
1 Trace the design on the right side.
2.
Set the stitch length control on ‘1 and stitch along the outlines.
3.
Sew the fabric to be appliquéd to the right side with long stitches (1).
4.
Follow the outlines of the design on the wrong side with a narrow zigzag stitch
(stitch length control on ‘1”), as shown
(2).
5.
Trim the excess materiat seam on the right side (3).
close to the
6.
Sew over the edges of the appliqué with closely packed zigzag stitches (stitch length: 0.2; stitch width: medium), as il lustrated (4).
34
1
4
2
To change cover by pull by an arrow.
1
To change the light bulb, remove the face cover by pulling it in the direction indicated by an arrow.
Push the light bulb into its socket, turn left and pull out.
Insert the new bulb so that its pins slide into the socket slots. Press the bulb in and turn right.
As you replace the face cover, slip tip d into slot c, then push against the face cover un til it snaps into place.
35
Machine Care
From time to time, clean the parts in the machine arm and in the vicinity of the sew ing hook with a soft brush. To this end, re move the needle, the sewing foot and the bobbin case with the bobbin.
On Pfaff 285 machines, loosen the set screw, lift the front of the free arm cover and pull the cover out lengthwise of the arm (1 & 2).
Pfaff 284 machines are tilted back. On port able machines, loosen the screw on the bottom of the machine base and tilt the machine back cautiously.
36
2
Longevity and smooth machine performance are dependent on regular cleaning and proper oiling. Since your Pfaff sewing ma chine has been made from high-grade ma terials, there are only a few oiling points left.
The raceway in the sewing hook is an important oiling point. From time to time, put a drop of oil into the hook raceway (see ill, at left and center). Do not oil the bob bin winder.
P1 aff 284
Pfatf 285
—
37
Trouble Shooting
When operated properly, your sewing machine will hardly develop any trouble.
Please remember to restore the normal setting after you have completed your sewing job (buttonhole sewing or darning, for instance) by switching the machine back to straight stitching, flicking the needle posilion lever to its central position, and setting the stitch length control on “2’.
If trouble should occur, check the following:
* The needle must not be damaged and must be inserted correctly (p. 17).
•
Select the correct needle and thread from the Needle and Thread Chart (on inside front cover).
C Check whether the needle has been threaded correctly (p. 11).
• Use only high-grade machine thread or sewing silk.
• Check to see that the bobbin case has been inserted correctly (p. 9).
• Both tensions must be balanced correctly
(p. 16).
• Don’t force the feeding motion, merely guide the material lightly.
• Clean and oil the machine as instructed
(pp. 36 & 37).
• Make sure there are no pieces of thread wedged between the tension discs. To remove them, pull a narrow fabric strip between the tension discs.
• The Pfaff rotary hook will not normally jam, even If the machine should be handled Improperly.
If thread should happen to jam In the hook raceway, It Is sufficient to put a drop of oIl Into the raceway, jerk the balance wheel back and then rock It
back
and forth, without applying force.
38
Contents
Appliqué Work
Blindstitching
Button Sewing
Changing the Light Bulb
Changing the Needle
Changing the Needle Position
Changing the Sewing Foot
Cleaning
Essential Parts of Pfaff 284
Essential Parts of Pfaff 285
Flat Felled Seams
Foot Control
Foreword
Page
34
32
31
35
17
28
17
Cording
Darning
Darning Foot
Drawing Up the Bobbin Thread
Dropping the Machine Feed
Electrical Equipment
Engaging and Disengaging the Sewing
Mechanism
36
23
18119
18
12
18
4
7
2
3
21
4
Fundamentals of Machine Operation
Hemming
1
13
22
Hemstitching
24
Inserting a Full Bobbin
Inserting Lace
8
27
40
Inserting Patches
Inserting the Bobbin Case
Machine Care
Monogram Embroidery
Motor Disengaging Mechanism
Ornamental Sewing
Overcasting Edges
Preface
Quilting
Raising and Lowering the Sewing Foot
Regulating the Stitch Length
Regulating the Thread Tension
Removing the Bobbin Case
Removing the Face Cover
Reverse Sewing
Sewing Buttonholes
Sewing
Curtains
Straight Stitching
Trouble Shooting
Page
26
9
36/37
6
35
15
29/30
33
14
31
5
33
25
1
21
12
14
16
38
Upper Threading
11
Winding the Bobbin
Workplate of Pfaff 284
7
10
Workplate of Pfaff 285
Zigzag Stitching
10
25
Zipper Insertion
20
Advertisement