interface equipment – distribution amplifiers

interface equipment – distribution amplifiers
order/info: 1·800·426·8434 • www.bswusa.com
Radix DA1600
2x8 or 1x16
Distribution Amplifier
Still at top seller at BSW, the Radix DA1600 is a heavy-duty distribution amp with 8 stereo or 16 mono balanced
outputs. Level control and selectable pads accommodate a wide range of input levels. Features: removable, plug-in
connectors that allow wiring changes to be made quickly and effortlessly with the distribution amp still in the rack;
THD .01% max @ +20 dBm out, SNR 90 dB.
DA1600
List $520.00
LowestPrice
only $379!
Aphex 1x4 Distribution Amplifier
The Aphex 120A is a high-performance 1x4 audio
distribution amp. It features one high-impedance input
and four low impedance outputs, all electronically
servo-balanced; half-rack steel chassis; THD < .002% @
+4 dBm; hum and noise better than 90 dB down.
120A List $319.00
Rane DA216S 2x16 Distribution Amplifier
The DA216A is a 2-input, 16-output splitter/distribution amplifier. The DA216A is capable of providing 16 discrete
balanced outputs from one or two balanced mic level or line level inputs. The level of each output is individually
adjusted via one of the sixteen level controls. Each output may be assigned to either or both inputs via accessible
slide switches. The Master A and B Level controls affect the overall level of each input. LEDs indicate an overload at
either the inputs or at the internal gain stages. Input gain switches provide a mic input with +60 or +40 dB of gain,
or a line input with +20 or 0 dB. The DA 216S has Euroblock connectors, and an internal universal power supply.
DA216S
List $519.00
LowestPrice
only $415!
Features:
• Input impedance: 100 K ohms balanced ; max input level: +22 dBV
• Output impedance: 50 ohms balanced; max output level: +24 dB
LowestPrice
The Broadcast Tools
tinyTools 2x6 stereo
distribution amplifier is equipped with a
stereo line level high-Z input, which accepts a balanced
or unbalanced source with six active balanced low-Z
output amplifiers. Individual level controls.
LowestPrice
only $169!
ESE 1X4
Distribution Amplifier
The Rolls RA63s is an 8-channel mono/4-channel stereo distribution amplifier. The outputs are designed to drive
high-level balanced lines in a sound distribution system. The screw terminals on the rear panel are for input and
output, and each output may power more than one line.
List $188.00
only $279!
Broadcast
Tools 2X6
Stereo DA
2X6DA List $179.00
Rolls RA63S 1X8 or 2X4 Distribution Amplifier
RA63
LowestPrice
The ES217 is a 1x4 DA housed
in a free-standing chassis. Barrier
strip or optional XLR connections
(ES217XLR); balanced or
unbalanced I/O.
ES217
List $195.00 $18900
ES217XLR List $320.00 $30900
LowestPrice
only $149!
from $189!
Symetrix 581E 4x16 Distribution Amplifier
The 581E is a high-quality 4-input/16-output distribution amp. Each 1-input, 4-output module operates independently.
Simple rewiring creates 2x8 and 1x16 configurations. Features: removable Phoenix-type connectors for easy installation;
precision circuitry yields THD + noise less than .009%; LED input metering; level control on I/Os; internal power supply.
581E
List $599.00
LowestPrice
only $499!
Audioarts SDA8400 2x8 Distribution Amplifier
The Audioarts SDA-8400 is a 2x8 rackmount distribution amplifier. Features: LED status lights for all input and output
channels; extremely flat frequency response; separate 3-conductor connectors for each input and output.
SDA8400
List $540.00
LowestPrice
only $459!
ATI Distribution Amplifiers
The ATI DA103 is a 1-in/3-out line level distribution
amp. Features: 1 line level input to 3 servo balanced
outputs @ +22 dBm; master gain control and
independent output level trimmers; individual twopiece Phoenix-type connectors. The DMA103 is a 1-mic
in/3-line out mic distribution amp. Features: dip switch
selection of phantom power and preamp gain; XLR I/O.
$
DA103
List $239.00
20500
$
DMA103
List $279.00
23900
LowestPrice
from $219!
ATI Distribution Amplifiers
These rackmount ATI distribution amps come in four models,
depending on the configuration you desire. The DA206 is a dual 1x3
DA and the DA412 is a quad 1x3 DA. Features: outputs are active
balanced and individually adjustable; inputs can be paralleled via internal
jumpers for 1x6, 2x6 or 1x12 operation; balanced XLR input and output
connectors.
The DA208 is a dual 1x4 DA and the DA416 is a quad 1x4 DA. Features:
outputs are active balanced and individually adjustable; inputs can be
paralleled on rear connectors for 1x8, 2x8 or 1x16 operation; barrier
block input and output connectors. The DA208 and DA416 have clipping
indicators. The DA208S version adds signal-present indicators to the DA208.
DA206
DA412
DA208
DA208S
DA416
Dual 1x3 distribution amp XLR I/O
Quad 1x3 distribution amp XLR I/O
Dual 1x4 dist. amp barrier I/O, clipping indicators
Dual 1x4 dist. amp barrier I/O, signal indicators
Quad 1x4 distribution amp barrier I/O
List $529.00
List $749.00
List $409.00
List $459.00
List $599.00
LowestPrice
45900
63900
$
35900
$
39900
$
51900
$
$
from $359!
INTERFACE EQUIPMENT – DISTRIBUTION AMPLIFIERS
193
order/info: 1·800·426·8434 • www.bswusa.com
Radial Engineering
Passive Direct Boxes
AEQ
DA-26 2x6 or 1x12
Distribution Amplifier
This compact (1RU) rack-mountable analog audio distribution amplifier feeds one
mono input to 12 mono outputs or two stereo inputs to six stereo outputs. For
ultimate flexibility, it offers independent gain control for each output. All inputs and
outputs are transformer balanced for greater system protection.
Features:
• Max. Input level: + 20 dB
• Input impedance: 1.5 kOhms
• Adjustable gain: +14 dB for each output
DA-26
List $625.00
•O
utput impedance: < 220 Ohms
•C
onsumption: 8 VA
•U
niversal auto-range PSU:
90-250V / 50-60 Hz
Call BSW For Lowest Price: 800-426-8434
Henry Engineering
U.S.D.A Summing
Distribution Amp
The U.S.D.A. can be used as a
1X4 or 2X4 DA, or to combine a stereo
input to a mono output. Two inputs (one stereo pair) accept
balanced/unbalanced sources; four 600 ohm balanced outs (two stereo pairs); mono/
stereo switches; euroblocks.
USDA
List $225.00
Accessories:
RMA
LowestPrice
Rackmount kit for 1-3 units
only $179!
5500
$
LowestPrice
The Whirlwind pcDI interfaces unbalanced stereo
line sources with professional balanced low
impedance equipment. Input your signals with
one 1/8" TRS minijack or two sets of RCA input
and through jacks. Output is via balanced XLRs.
Ground lift switch to help eliminate hum and
a 20 dB pad switch for connecting to “hot” signals.
PCDI
List $180.00
ART PDB Passive Direct Box
The new ART Passive Direct Box is a road-rugged
DI for connection of the outputs of electronic
musical instruments (or other audio sources)
to the balanced inputs of mixer consoles and
other balanced inputs. It also lets you connect
a music source to an instrument amplifier while
simultaneously patching it to a mixer.
DI100
PDB
List $45.00
LowestPrice
LowestPrice
only $129!
With the DI100, hum and impedance problems
are things of the past. Features: balanced XLR
and unbalanced 1/4" input/output jacks; switchable
input attenuation allows input levels of up to +50
dBu; Ground Lift isolates grounding circuit for hum
elimination.
only $35!
ART Active & Passive Direct Boxes
This Xdirect active direct box connects line
or speaker level signals to a mixer or other
balanced input. The high impedance 1/4"
and XLR inputs are buffered and converted
into an isolated balanced low impedance
signal source. Features: input attenuator
switches allow for a wide range of signal levels;
input link jack allows for tapping off of your signal
chain; ground lift switch helps reduce hum; switchable low pass filter.
Zdirect is a passive direct box.
XDIRECT
List $50.00 $4000
ZDIRECT
List $35.00 $2500
LowestPrice from $25!
Tapco Active and Passive Direct Boxes
The Tapco DP-1A active direct box sports a 1/4" input
jack for connecting instrument or speaker-level signals,
and a separate 1/4" thru jack. Its ground lift switch
helps eliminate hum and buzz problems in
musical instrument hookups. It can be powered
internally by two 9-volt batteries or externally by
phantom power from a mixer. The DP-1P is a
passive direct box.
DP-1A Active List $59.99 $4999
DP-1P Passive List $49.99 $3999 LowestPrice
from $8999!
Whirlwind Active Direct Box
Behringer DI100
Active Direct Box
FEATURES:
• Ground lift – switchable
• Input attenuation – switchable (0dB, -20dB, -40dB)
• Instrument Input – 50k ohm
• Output jack – 600 Ohm XLR output jack ; Parallel link – jack 50k ohm
194
The PRO-DI is a full-range single channel passive direct
box equipped with custom-made audio transformers
for exceptional signal handling without saturation and
low phase distortion in the bass and mid regions. Its
brilliant clarity and definition make it ideal for acoustic
guitar, bass and keyboards— live or in the studio.
The Pro-AV1 is a passive direct box that sports a variety
of stereo inputs that are merged via a resistive mixer to
mono, simplifying signal management. It offers a 1/4"
for instruments, RCA and 1/8" connectors for consumer
electronics, and a +4 dB XLR input for pro systems.
Its custom-wound transformers can withstand
exceptionally hot levels while maintaining linearity
from 20 Hz-18.5 kHz.
PRO-DI Passive direct box
List $100.00 $8999
PRO-AV1 Passive stereo direct box List $125.00 $10999
List $49.99
LowestPrice
only $3999!
Countryman DT85 Active Direct Box
How do you send the purest, warmest and most
natural signal out of a high-impedance instrument to
a balanced mic input at the console? Countryman’s
Type 85 Direct Interface box adds nothing and removes
nothing from the instrument’s signal. No electronic
hum or buzz. Its 9V battery backup to phantom power
helps ensure it will never lose power onstage.
DT85
List $231.70
LowestPrice
only $149!
DT85 Front and Back Panel
Whirlwind IMP2 Passive Direct Box
Passive doesn't mean wimpy. Built rugged on the
inside and outside, you'll find this direct box in
pro systems everywhere. It converts a line or
instrument level unbalanced signal to a low
impedance mic level balanced signal quickly,
efficiently and quietly. Features: 1/4" parallel wired
in/out jacks, Ground Lift switch to help isolate hum
and buzz, impedance ratio (input to output): 133:1.
IMP2
List $69.95
LowestPrice
only $4269!
Rolls DB25 Passive Direct Box
This transformer balanced, passive DI features a ground
lift switch for hum elimination and an attenuator
switch to let you pad the input signal by 20dB or 40dB.
This lets you input a line level signal (even a speaker
level signal) and then connect it to a balanced line
or mic input on a mixer. Two paralleled 1/4" inputs to
“pass-through” your input signal to a tuner, pre amp or other devices.
from $3999!
DB25
List $35.00
LowestPrice
only $3099!
INTERFACE EQUIPMENT – DISTRIBUTION AMPLIFIERS & DIRECT BOXES
order/info: 1·800·426·8434 • www.bswusa.com
Henry Engineering Interface Amplifiers
Matchbox HD is a high-definition bi-directional level and impedance
interface between unbalanced consumer RCA I/O and balanced pro XLR I/O.
MATCHBOX HD Features:
• Bi-directional stereo interface between -10 dBv unbalanced
and +4 dBu balanced
• True signal-to-noise ratio of 100 dB, with 22 dB of headroom
• Total dynamic range of 122 dB
• Ideal for 24-bit sound cards and other digital audio sources
• Four independent amplifiers
• Built-in AC power supply, 1/3 rack width x 1RU
• Balanced XLR and unbalanced RCA I/O
Top-Selling
Henry Leveling Interfaces
The Twinmatch is similar to the Matchbox, but provides unidirectional
connection of two unbalanced stereo signals to professional balanced
systems. Signal/noise is >80 dB typical.
MATCHBOXhd Bi-directional interface amplifier List $225.00 $17900
TWINMATCH Unbalanced-to-balanced amplifier List $225.00 $17900
LowestPrice
Accessories:
RMA
Rackmount kit for 1-3 units
5500
MATCHBOXHD Back Panel
TWINMATCH Back Panel
only $179 ea!
$
Aphex 124A Level
Matching Interface Amp
Henry Engineering Patchbox II
Stereo Output Multiplier
Henry Engineering
USB Matchbox and USB Match Plus
For use with your computer, the USB Matchbox gives
you pristine audiophile performance without the noise,
hum and interface problems that you can get with
built-in sound cards. It provides XLR input and output,
as well as an RCA Aux input and converts them to a
digital signal to send via USB to your computer, or vice
versa. The USB Match Plus gives you the same great
quality of the USB Matchbox, but also adds some extra
features to enhance the sonic experience, such
as easy-to-read level meters and a headphone
monitor amp/jack so you can quickly evaluate your
audio quality.
USBMATCHBOX List $550.00 $50900
USBMATCHPLUS List $750.00 $69900
LowestPrice
from $509!
Henry Engineering Stereo Switcher
StereoSwitch is a cost-effective way to remotely
select between 3 stereo sources. Audio is fed via
plug-in Euroblock connectors.
Features:
• Sealed relays with gold-plated contacts
• No circuitry in the audio path
• Controlled with any momentary or maintained
contact closure, open collector, TTL/CMOS logic, or
DC voltage from 5-24 volts
• 1/3-rack-space; optional rack shelf
STEREOSWITCH
List $275.00
Accessories:
LowestPrice
RMA Rackmount kit for 1-3 units
only $229!
5500
$
The PatchBox II is a passive “output multiplier” that can
be used to distribute the output of a professional audio
mixer to the inputs of peripheral equipment. It accepts
both balanced and unbalanced sources. From a stereo
source, PatchBox creates twelve stereo outputs: six
balanced stereo and six unbalanced stereo output
pairs. PatchBox balanced outputs, on XLR and 1/4" TRS
connectors, provide a “unity gain” signal with a 600 ohm
source impedance.
PATCHBOXII List $150.00
LowestPrice
only $125!
ART CleanBox
2-Way Stereo
Converter
The CleanBox twoway stereo converter
is an all-in-one
balancing, unbalancing
and gain-adjustment unit that
connects consumer and pro
gear. It connects RCA unbalanced to XLR balanced and
XLR balanced to RCA unbalanced. Features: dual female
RCA inputs and outputs; dual XLR female inputs and
male outputs; uses 12V DC (adaptor included).
CLEANBOX List $70.00
LowestPrice
The MB15 ProMatch
converts consumer
level stereo RCA
signals to balanced
XLR professional line
level, and back. One
side of the unit has
two balanced XLR inputs and stereo RCA
outputs. The other has stereo RCA inputs and two XLR
outputs. Stereo level controls. Order today.
List $80.00
LowestPrice
124A
List $229.00
Accessories:
LowestPrice
only $199!
37
44008SA Rackmount kit
$
95
Broadcast
Tools Level
Matchers
The tinyTOOLS
MT-1 by Broadcast
Tools is an active
bi-directional stereo level-matching
interface. One stereo signal (dual RCA
jacks are provided for unbalanced gear) in each direction.
Optional +6 dB gain possible in balanced direction.
The TMT-2 doubles the capability in one direction,
only. It converts four channels of unbalanced audio to
balanced audio.
MT1 Bi-direction conversion List $169.00 $15900
TMT2 Unbalanced to balanced List $169.00 $15900
LowestPrice
only $159 ea!
only $55!
Rolls MB15
Interface Amp
MB15
The 124A easily interfaces consumer audio equipment
to professional gear. Active, servo-balanced circuitry
converts +4 dBm (or +8 dBm) line levels to -10 dBm
(hi-fi) levels, and back again. XLR and RCA connectors
on reverse.
only $59!
Henry Engineering
AES/EBU-to-S/PDIF
Distribution Amp
The Digimatch 2x6 is an AES/EBU-to-S/PDIF interface
and distribution amp for digital audio signals. It has one
AES/EBU input and three AES/EBU outputs, plus one
S/PDIF input and three S/PDIF outs.
DIGIMATCH2x6
List $325.00
Accessories:
LowestPrice
RMA
Rackmount kit for 1-3 units
only $279!
5500
$
INTERFACE EQUIPMENT – LEVELING INTERFACES
195
order/info: 1·800·426·8434 • www.bswusa.com
Automatic Digital
Matrix Routers
Behringer DI800 8-Channel Active Direct Box
The Behringer ULTRA-DI PRO DI800 is a professional 8-channel DI-box. It converts
unbalanced line inputs into balanced outputs, featuring optional mains or phantom
powered operation. Its servo-balanced operation assures ultra-flat frequency
response. Additionally, it allows direct connection to speaker outputs with up to
3,000 watts. A ground lift switch as well as input attenuation/gain per channel
round off this powerful device.
FEATURES:
• Professional, multi-purpose 8-channel Direct Injection box for stage
and studio applications
• Converts unbalanced line inputs into balanced outputs
• Optional mains or phantom powered operation
• +20 dB gain switch for pre-amplification of low-level signals
• Attenuation switch for input levels up to +40 dBu
• Ground Lift switch eliminates typical ground loop problems
• Link output for easy connection to further equipment
• XLR and 1/4" TRS connectors
• Illuminated switches enable perfect operation in dark stage environments
DI-800 List $99.99
LowestPrice
only $79 !
99
ART 8-Channel Transformer/Isolator
ART’s Transformer Eight is a totally passive audio interface that uses eight transformers
to separate input and output signal grounds, thereby isolating two systems and
reducing hum and ground-loop noise. Balanced XLR, 1/4" phone, and RCA type
phono connections on all inputs and outputs simultaneously. Perfect as an interface
between your DAW and your monitor system, isolation on long cable runs, etc.
T8
List $189.00
LowestPrice
only $149!
Behringer MX882 8-Channel Splitter/Mixer
Behringer’s ULTRALINK PRO MX882 is a unique and universal problem-solver when it
comes to signal distribution. Its extensive routing possibilities, professional switching
concept, servo-balanced inputs and outputs with XLR and 1/4" TRS connectors and
generous LED displays make it extremely flexible. Whether as a splitter, a mixer or
a level raiser, the ULTRALINK PRO guarantees ultimate reliability and the shortest
possible signal paths. In a mix mode, mix the 6 mono inputs and the main stereo
input to the main stereo output. Each mono channel additionally sports a pan pot
for individual stereo imaging. Features include: 8-in, 2-out line mixer; 2-in, 8-out
line splitter; usable as 6-in, 6-out level matching amplifier or DI box; usable as
independent matching amplifier to convert between -10 dBV and +4 dBu; extreme
headroom for excellent dynamic spectrum; outstanding frequency response from
5 Hz to 200 kHz for audio purity; 6 mono and 2 main inputs and outputs; precise
4/8-segment LED level displays for each amplifier section; servo-balanced, goldplated XLR and 1/4" TRS inputs and outputs.
MX882 List $129.99
LowestPrice
only $9999!
Henry Engineering
Digital 2x8
Distribution Amp
Do you need to send digital
audio signals to multiple
destinations? The Digital D.A.
2X8 is just what you need. It’s
a dual-mode distribution system for AES/EBU digital audio signals. It produces
outputs that are exact copies of the input signal(s). There are no changes to
any data or timing, and no jitter, delay, or latency is added. It provides up to 8 outputs
from a single digital source. Features: single (1X8) or dual (2X4) modes: Its 8 outputs
can also be split into two groups, providing 4 outputs each from a pair of digital
sources; sample rate up to 96 kHz; steel enclosure to protect it from the daily wear.
DIGITALDA2x8 List $395.00
196
LowestPrice
only $339!
DM1612 Back Panel
Lectrosonics Automatic Digital Matrix Routers
The Lectrosonics DM1612 is a powerful digital audio processing, mixing and routing
system. The basic architecture consists of 16 mic/line inputs and 12 outputs with a full
DSP-based crosspoint matrix that allows every input to be routed to any or all outputs.
Following the A-D conversion at each input, the signal passes through multiple DSP
filters, ADFE (automatic digital feedback eliminator), a compressor and a digital delay.
In the matrix, gain is adjustable from -69 to +20 dB in 1 dB steps at each crosspoint.
Each of the 12 outputs provides a digital delay, multiple DSP filters and a compressor/
limiter.
DM1612 Features:
• 16 mic/line inputs, 12 line outputs (8 outputs are mic/line switchable)
• 16 x 12 digital matrix mixing; gain is adjustable from -69 to +20 dB
• Proportional gain auto mixing algorithm with patented “AutoSkew”
• Auto-mixing operates at the output of the matrix – each input channel can
participate differently in each output mix
• Each output has its own NOM mixing bus
• 6 filter stages plus compressor, ADFE and delay on each input
• 9 filter stages plus compressor, limiter and delay on each output
• 128 macros available for storing up to 64 commands per macro
• USB and RS-232 interfaces for setup and control
• Digital I/O ports for “daisy chaining” and to connect other LecNet 2 devices
• AMX and CRESTRON compatible
DM1612 16-input/12-output List $3,710.00
DM16-24 16-input/24-output List $4,550.00
DM812 8-input/12-output List $2,665.00
Call BSW For Lowest Price: 800-426-8434
Aphex Digital
Audio Splitter
The Aphex 148 splits 8 channels
(4 pairs) of digital audio into 32
channels (16 pairs) via 15-pin D sub connectors. It can be internally configured for
either 110 ohms balanced or 75 ohms unbalanced operation.
Features:
• One DB15 male input connector (4 AES3 stereo ins)
• Four DB15 female output connectors (4 AES3 stereo outputs on each)
• Sample rates to 192 kHz
• All I/O transformer-isolated, with impedance balanced outputs
• Low jitter, 1/2 rack unit with internal power supply
148
List $319.00
LowestPrice
only 279!
BSW Offers Package Pricing.
Call Us For Your Discounted Price.
INTERFACE EQUIPMENT – ROUTERS AND SWITCHERS
order/info: 1·800·426·8434 • www.bswusa.com
Trust Broadcast Tools
For All Your Audio
Switchers and
Routers
Broadcast Tools DAS8.4PLUS
8X4 Digital Audio Routing Switcher
The DAS 8.4 PLUS provides digital audio routing switching of any one of 8 AES inputs
to 4 AES outputs. Routing switching allows any one input to be assigned to any/or
all outputs. The DAS 8.4 may be controlled via front panel switches, contact closures,
5-volt TTL/CMOS logic and/or the multi-drop RS-232 serial port. This new ‘PLUS’ version
adds VU meters to the front panel and allows easy VU meter selection to monitor any
of the four outputs. The front panel is equipped with push buttons, output assignment
LEDs and a headphone jack. Internal audio activity/silence sensors monitor all fouroutput channels. Each is equipped with front-panel ACT LED indicators; alarm delay
and restore duration are adjustable. Additional features: 24-bit/96 kHz D/A converter
with analog balanced stereo output, 16x16 GPIO port, screw terminals.
DAS8.4PLUS List $879.00
Call BSW For Lowest Price: 800-426-8434
SS4.2
Broadcast Tools 4x2 & 16x4 Active Stereo Matrix Switchers
For the industry’s top matrix switchers, look no further than Broadcast Tools—and BSW
has Broadcast Tools at the lowest prices! The Broadcast Tools SS 4.2 provides matrix audio
switching of 4 stereo inputs to 2 stereo plus 2 mono outputs. Matrix switching allows
any/or all inputs to be assigned to any/or all outputs. The SS 4.2 may be controlled via
front panel switches, contact closures, 5-volt TTL/CMOS logic and/or
the multi-drop RS-232 serial port. Headphone jack.
SS4.2 Features:
• Separate input selection push buttons for each output channel
• Three switching modes: interlock, overlap and mix
• 4 open collector channel status outputs or programmable via burst commands
• 4 SPST relay outputs via burst commands, and 16 input GPI port with LED
• Multi-turn input and output level controls
• Balanced stereo inputs/outputs; depluggable screw (EURO) terminals
The SS16.4 offers 16 stereo inputs and 4 stereo outputs.
SS 4.2
SS16.4
4x2 stereo audio switcher List $439.00
16x4 stereo matrix switcher List $ 1,259.00
Call BSW For Lowest Price: 800-426-8434
SS8.1II
SS4.1III
SS16.4
Broadcast Tools
Silence Monitor
The Silence Monitor III PLUS is
designed to monitor any stereo or two independent monaural sources, generate alarms
and transparently switch to back-up source equipment when silence is detected. Now
with LED indicators for left/right audio, audio and external alarms, power and more.
16X1
Broadcast Tools Passive Audio Switchers
Broadcast Tools switchers offer local and remote control and
status via contact closures and RS232 serial ports.
The SS2.1BNCIII offers passive switching/routing with two composite audio or AES/
EBU inputs to two composite audio or AES/EBU outputs. Features: last selected source
memory; BNC connectors; 1/3-rack size. Optional RA-1 rack shelf.
SS2.1TERMIII/SS4.1TERMIII offer passive switching/routing with two stereo inputs
to one stereo output or vice-versa (or four stereo inputs to one stereo output for the
SS41.TERMIII). Pluggable screw terminal connectors; 1/3-rack size.
SS8.1II passively switches or routes any one of 8 stereo inputs to a single stereo out.
Features include front panel selection switches with LEDs; output muting and remote
step input; last source selected memory; 8-input GPI port; 1/2-rack size mountable on
optional rack shelf. The 16X1 passively switches or routes any one of 16 stereo inputs
to one stereo output or vice-versa. Connections are via removable screw terminals.
$
SS2.1BNCIII
2x2 composite switcher
List $199.00
16900
$
SS2.1TERMIII
2x1 stereo switcher
List $199.00
16900
$
SS4.1III
4x1 stereo switcher
List $239.00
19900
$
SS8.1II
8x1 stereo switcher
List $439.00
38900
$
16X1
16x1 stereo switcher
List $724.00
58900
Accessories: RA-1 rack mount shelf $4900
LowestPrice
from $169!
8x2 Stereo Matrix Switcher
Broadcast Tools Active Stereo Matrix Switchers
The new ACS 8.2 PLUS-RJ cleanly provides matrix audio switching of 8 stereo inputs
to 2 stereo plus 2 mono outputs. You can assign any or all inputs to any or all outputs,
with any input assigned to output one having fading capabilities. It features multiple
RJ45 connectors for all audio connections, an RJ-21X (punch block) connector for
GPIO connections, and it conforms to the Studio Hub format. A front panel monitor
Features:
• Front-panel/remote
control and relay monitoring
• Removable screw terminals
• Built-in stereo/monaural
program switcher
SMIIIPLUS List $259.00
• Precise time delay from 2 seconds to 93 minutes
• Precise restore timing delay from off to 46 minutes
• Relays for remote functions
• Selection of detection of -23, -25, -35 and -45 dB
LowestPrice
only $229!
Broadcast Tools
Digital Monitor
Switcher
The Digital Monitor Switcher III is
designed to switch two AES signal sources. It’s the digital answer to an analog silence
sensor/switcher. Features: switch to backup source can be triggered by loss of clock,
digital error flags, external switch contact and/or the internal analog silence sensor;
headphone jack, balanced stereo monitor output; remote control; removable screw
terminals.
DMSIII List $499.00
Accessories:
RA-1
LowestPrice
Rackmount shelf
only $429!
4900
$
selection switch lets you choose which stereo output the VU meter and headphone
amplifier monitors. Truly flexible, the ACS 8.2 Plus/RJ can be controlled via front panel
switches, contact closures, 5-volt TTL/CMOS logic, and/or the multi-drop RS-232 serial
port. The ACS 8.2 PLUS provides connections via plug-in Euroblock screw terminals.
ACS8.2PLUS-RJ
ACS8.2PLUS
8x2 stereo matrix with RJ45s
List $879.00
8x2 stereo matrix with Euroblock List $879.00
Call BSW For Lowest Price: 800-426-8434
INTERFACE EQUIPMENT – ROUTERS AND SWITCHERS
197
order/info: 1·800·426·8434 • www.bswusa.com
Matrix Switcher w/ GUI for Automation Control
Broadcast Tools ADMS44.22
Analog & Digital Matrix Switcher
This feature-packed matrix switcher sports four stereo AES and four stereo analog
inputs along with two independent stereo analog and AES outputs in one rack space.
Each input is equipped with a 3-band EQ, five types of filters, and a leveler function for
maximum sonic flexibility. The ADMS 44.22 provides both word clock in and word clock
out signals for synchronization to external digital equipment. Additionally, the four
stereo AES inputs support high-quality real-time sample rate conversion for connection
with asynchronous digital sources. Each output channel is equipped with an
automatic level control circuit and parallel stereo analog and stereo AES outputs.
The ADMS 44.22 can be controlled through RS-232 serial command. The ADMS 44.22
has four programmable relays and nine programmable open collector outputs for
controlling external device, and can transmit unit status and GPI information to the
controlling device for incorporation into broadcast automation systems. 16x16 GPIO
port; USB port, expansion port.
ADMS44.22 List $1,299.00
Call BSW For Lowest Price: 800-426-8434
Broadcast Tools 16x16 Stereo Audio Routing Switcher
The Broadcast Tools SS 16.16 provides audio routing of 16 stereo inputs to 16 stereo
outputs. This type of switching allows any one stereo input to be assigned to any/
all stereo outputs. The SS 16.16 may be controlled via front panel encoder controls
and/or multi-drop RS-232 serial port. A 16x16 GPIO port is provide when used with
automation systems. Internal audio activity/silence sensor monitors output channel
sixteen. Free MS Windows NetSwitch/II remote control software is available for
download for serial/USB or Ethernet.
Features:
• Stereo routing of any one input to any/all outputs
• 40x4 LCD display
• Headphone amplifier with front panel jack and level control
• Front panel monitor speaker with mute switch and level control
• Sixteen user-configured macros
• Multi-turn input level controls and single-turn output level controls
• Electronically balanced stereo inputs and outputs via EURO terminals
SS16.16
List $2,699.00
Call BSW For Lowest Price: 800-426-8434
Quad-Mode AES/EBU
Distribution System
Broadcast Tools 4-In/16-Out Digital Audio System
The Broadcast Tools RDDA 4x4 is a four-input, sixteen-output routable digital audio
distribution unit capable of distributing the same format AES and/or Word Clock
around your facility. Each input may be configured to feed any one or all of the four
groups of outputs. Each group consists of four transformer-balanced outputs. Inputs,
outputs and status are supplied on removable Euro block connectors. Input signal
presence is monitored and displayed on four front-panel LEDs with remote control
status provided on the rear panel. The RDDA 4x4 is powered by a surge-protected
internal power supply. The half-rack profile allows the unit to be set on a desktop,
mounted on a wall or rackmounted on the optional RA-1 rack shelf.
Features:
• 4 transformer balanced loop-thru inputs with selectable termination
• 16 transformer balanced outputs with selectable termination
• Accepts sample rates from 8 to 96 kHz
• I/O selection via DIP switches
• Power and Status indicators; Open Collector Status outputs
RDDA4X4
Accessories:
RA-1
198
List $299.00
LowestPrice
Rackmount shelf
4900
$
only $265!
RDL Flat-Pak Audio Interfaces
RDL Flat-Paks are higher-quality modules for your most demanding audio applications.
The unique Flat-Pak case can be directly screwed or bolted to cabinets or easily racked
to the back of a specially-made RDL rack rail adaptor (looks like a blank front panel with
room for up to three Flat-Paks on the back side, #FPRRA). Each unit dimensions 3.25"H x
5.75"W and typically less than 1.5" deep. Each of these products require the 24V power
supply sold separately (#PS24A). For specs on each product go to www.bswusa.com.
The FPALC1 is a single-channel (mono) automatic level control featuring detachable
terminal block input and output. The gain adjustment is set as high as possible with the
loudest source without the Input Overload indicator flashing. Common applications
include paging outputs from telephone systems, music-on-hold feeds for telephone
systems, background or foreground amplifier inputs in sound systems and more. The
FPALC2 is a two-channel (stereo) module featuring phono jack inputs and outputs.
The FPMP1 microphone preamp uses RDL’s exclusive low noise discrete circuitry to
produce studio quality, low-noise performance in an economical preamp. The XLR
and plug-in terminal block connections make the FPMP1 perfect for both hardwired
installations and remote use with standard audio cables. Select phantom power 24V,
12V or Phantom Off. The FPMPA2 is a dual mic preamp each with its own XLR I/O.
Choose 12, 24 and 48V phantom power.
The FPMX4 is a single channel audio mixing module featuring four identical inputs.
Each input accepts either a mic or line level source. The output section provides four
mixing potentiometers corresponding to the four inputs, and a level indicator. The
output section provides both a balanced line (+4 dBu) and balanced microphone
level (-45 dBu) output. Both outputs may be used at the same time.
The FPPA20 is a 20-watt power amplifier with adjustable gain control and an output
for 8 ohm speaker.
The FPPEQ3 is a single channel parametric EQ featuring three identical independent
filters. Each filter has Frequency, Boost/Cut amplitude, and Bandwidth parameters.
The FPBUC2 converts two channels from balanced to unbalanced audio. This module
features two identical active (transformerless) channels. Gold contact XLR jacks are
utilized for the balanced input channels. Each output is unbalanced, connected
through a gold-plated phono jack. A level trim potentiometer is provided for each
channel. The FPUBC2 is a two-channel unbalanced-to-balanced converter. The
FPUBC6 is a six-channel unbalanced-to-balanced converter.
FPALC1 Automatic level control, mono, terminals
List $254.00 $18900
FPALC2 Automatic level control, stereo, phono jacks List $282.00 $21000
FPmp1 Mic preamp with phantom – terminals & XLR List $254.00 $18900
FPMPA2 Dual mic phantom adaptor – 12, 24, 48V, XLR List $249.00 $18900
FPMX4 4 mic or line input mixer – mic and line out List $395.00 $29500
FPPA20 Power amplifier – 20 watts into 8 ohms
List $166.00 $12000
FPPEQ3 3-band parametric EQ – terminals, phono
List $310.00 $23500
FPBUC2 Balanced-to-unbalanced converter – 2-chnl List $199.00 $15000
FPUBC2 Unbalanced-to-balanced converter – 2 chnl List $199.00 $15000
FPUBC6 Unbalanced-to-balanced converter – 6 chnl List $421.00 $32500
Accessories:
PS24A
FPRRA
LowestPrice
24V power supply
RDL Flat-Pak series rack rail adaptor
INTERFACE EQUIPMENT – ROUTERS AND SWITCHERS
from $120!
2295
5000
$
$
order/info: 1·800·426·8434 • www.bswusa.com
The Best of Both Worlds
Bridging the gap between Analog and Digital.
ADMS 44.22 Analog/AES Digital Matrix Switcher
The ADMS 44.22 is a four input stereo AES
and four input stereo analog matrix switcher
with two independent stereo analog and AES
outputs in a 1-RU profile. Each input is
equipped with a three band EQ, five types of
filters and a leveler function. Any or all of
the inputs may be mixed, faded, or dimmed
to either or both output pairs. Additional
features include selectable stereo PPM meters,
headphone amplifier, powered monitor
output, 16 x 16 GPIO port and RS-232 port
(USB and/or Ethernet optional).
USA Proud
[email protected]
www.broadcasttools.com
INNOVATIVE PROBLEM SOLVING TOOLS FOR BROADCAST
199
order/info: 1·800·426·8434 • www.bswusa.com
tinyTOOLS – tiny prices…
BIG CAPABILITIES!!
Broadcast Tools
SRC-2/SRC-2x –
Serial Remote
Controls
Broadcast
Tools Voice
Alarm Dialer
Broadcast
Tools Level
Matchers
The tinyTOOLS
SRC-2 by Broadcast
Tools interfaces two
optically isolated inputs and two
SPST relays to a RS-232 or USB port,
while the SRC-2X does this via a 10/100-base
T Ethernet port. Both can notify a PC software program
that any of two inputs have been opened or closed and
allows your software to control two SPST, 1-amp relays.
SRC2 Interface via RS-232 and USB List $129.00 $11500
SRC2X Interface via Ethernet
List $199.00 $17900
LowestPrice
from $115!
Broadcast Tools
Time Sync Plus
The tinyTOOLS MT-1 by Broadcast Tools is an active bidirectional stereo level-matching interface. One stereo
signal (dual RCA jacks are provided for unbalanced
gear) in each direction. Optional +6 dB gain possible in
balanced direction.
The TMT-2 doubles the capability in one direction,
only. It converts four channels of unbalanced audio to
balanced audio.
MT1 Bi-direction conversion List $169.00 $15900
TMT2 Unbalanced to balanced List $169.00 $15900
LowestPrice
only $159 ea!
The Time Sync
Plus provides four
GPS time referenced
outputs. The first is
an SPST relay, which pulses
at 12:00, 22:00, 42:00, and 54:30
and is user-programmable in each of
four locations for any minute and second. The
second is an active high driver with a 100 ms pulse
each second, while the third is a 4800-baud, RS-232
serial port providing a time zone adjustable time code.
The forth provides an active high driver in the ESE TC-90
serial time code format.
The SUM-4 features
four line level high-Z inputs, which accept a balanced
or unbalanced source; stereo and monaural balanced
low-Z outputs; individual level controls; stereo mixing/
link port for input expansion.
TIMESYNCPLUS
The compact CSD-1
converts a composite stereo signal into discrete left
and right balanced outputs. Featuring twin BNC input
connectors and multi-turn input level control. Plug-in
Euroblock output connectors.
List $399.00
LowestPrice
only $369!
Broadcast
Tools
2X6 Stereo
Distribution
Amplifier
List $179.00
LowestPrice
only $169!
List $329.00
only $169!
LowestPrice
only $299!
Broadcast Tools tinyTOOLS Rack Shelf
The RA-1 fits up to four tinyTool products. It comes
supplied with filler panels and mounting hardware.
RA-1
tinyTools rack shelf
List $55.00
LowestPrice
Are We Loud Yet?
only $49!
The Dorrough 40A2 displays both the peak and average of
the audio signal. The unique metering ballistics accurately
present loudness variations on an easy-to-read scale. Dual inputs allow sum and difference
metering. Peak Hold functions are standard along with a DB9 connector to access various over and
under parameters. The 40A2 has a scale showing 14 dB headroom in 1dB steps from +14 to -25. The 40A2 can be
rackmounted in a dual-channel configuration with the 40D rack kit.
The 40C2 has a scale allowing for 20dB of headroom in 1dB steps. The headroom scale is identical to the
AES/EBU Digital Standard.
Single meter, 14 dB headroomList $475.00
LowestPrice
Single meter, 20 dB headroomList $475.00
$
Accessories:
40D
Rackmount for two meters
4300
200
INTERFACE EQUIPMENT
only $195!
Broadcast
Tools
DTMF Tone
Encoder/
Decoder
The tinyTOOLS DTE16 by Broadcast Tools is a
feature-rich DTMF tone/sequence encoder that is
programmable to encode up to four tone sequences or
a single tone via any one of 16 contact closure inputs
and/or the RS-232 serial port.
The DTD16 is a DTMF decoder.
LowestPrice
List $189.00
List $189.00
only $179 ea!
Broadcast
Tools Auto
Answer
Coupler
Get high-quality
conversations and
interviews from your telephone. The TT-1 is a compact
auto-answer and auto-disconnect telephone hybrid.
A multi-turn hybrid NULL trimmer achieves 20+ db
separation. The rear panel is equipped with a RJ-11 jack
for the telephone line. A minijack (3.5mm) and screw
terminals are provided for balanced send and caller
audio.
TT1
List $129.00
LowestPrice
only $119!
Titus Tech Digital Audio Switcher
from Digital and Analog Sources
Dorrough 40-A2 Loudness Meter
40A2
40C2
List $239.00
DTE16 DTMF encoder DTD16 DTMF decoder
Fit 4 in Rack Shelf
The 2x6 stereo DA is equipped with a stereo line level
high-Z input, which accepts a balanced or unbalanced
source with six active balanced low-Z output amplifiers.
Individual level controls.
2X6DA
LowestPrice
Broadcast
Tools CSD1
Composite
Stereo Decoder
CSD1
VAD-2PLUS
LowestPrice
Broadcast
Tools 4-Input
Stereo Utility
Mixer
SUM4 List $179.00
NEW!!
The Broadcast Tools VAD-2 Plus is a user
programmable, two-input auto dialer with integrated
stereo silence sensor, temperature sensor and power
failure port designed for dial-out paging and/or voice
message notification. The VAD-2 Plus is equipped with
two wet or dry optically isolated inputs, temperature
sensor port, power failure input and stereo silence
sensor, which when tripped, will sequentially dial a
pager and/or up to four different phone numbers and
play back a user-recorded message corresponding
to the tripped input. The VAD-2 Plus is also provided
with two SPDT 1-amp relays for the control of external
equipment.
only $449 ea!
The 3DRX AES digital audio switcher has two stereo
digital and one stereo analog input (on XLRs) plus
a stereo digital output. The 3DRX will automatically
switch to the secondary digital input if the primary
digital source fails (loss of lock, data error, etc.) and then
switch to analog input if the two digital streams fail.
Features: 32 kHz, 44.1 kHz or 48 kHz sample rates; local,
remote or automatic control; up to 24 bit, 96 kHz stereo
digital audio for all digital inputs and outputs.
3DRX
List $1,250.00
Call BSW For Lowest Price: 800-426-8434
order/info: 1·800·426·8434 • www.bswusa.com
Load Up On
Radio Design Labs
Problem Solvers
RDL is the world’s premier manufacturer of Application-Specific Modules, a concept
which has attained proven success in thousands of facilities around the world.
Application-Specific Modules perform a particular electronic function or do a specific
job. Certain modules mix, others preamplify or amplify, others detect, others control,
and others distribute. The advantages of designing with RDL modules are versatility,
performance and value: Modules can be mounted into your system right where
their function is optimum, small-size circuits engineered for optimum performance
produce lower noise, and you only pay for the functions you need. Each model can be
rackmounted in optional rack kits and all active models require a power supply sold
separately.Start using RDL today. BSW carries hundreds of models…many more than
we can show here on this page.
Give us a call.
Balanced Audio Switch
RDL Dual 1x4 Balanced
Distribution Amplifier
The RU-DA4D is a dual 1x4 amplifier,
with two independent channels
with one input to 4 outputs; can be
configured for 8 mono outputs from
single source; balanced or unbalanced
I/O via barrier strip connectors; and
screwdriver level controls.
RUDA4D
List $285.00
LowestPrice
only $199!
RUSX4A
RDL 2-Channel
Mic/Line Preamplifier
The RU-MLA2 dual mic/line level preamp
offers independent front-panel XLR
input/output jacks; detachable input/
output terminal blocks; switch-selectable
mic or line inputs; mic gain and phantom
gain trim controls.
This compact unit offers outstanding
audio performance and flexibility. The
RU-LA2D is a bi-directional impedance
matching device for conversion from
+4 balanced to -10 unbalanced
equipment and vice-versa with XLR,
RCA and barrier block connections.
This compact, 4-channel mixer is only
1/3 rack space wide. Features: four
balanced/unbalanced main inputs
(4-mic/line via XLR or RCA); a mix input
for combining multiple mixers; balanced
mic or line output, plus unbalanced line
output; LED VU meter; 24V phantom
power for each mic input; built-in
switchable soft-knee compressor.
RULA2D
RUMX4
RUMLA2
List $318.00
LowestPrice
List $299.00
LowestPrice
only $234!
RDL Sequencing Oscillator
This device features 4 separate oscillators
set at 100 Hz, 1 kHz, 7.5 kHz and 15 kHz.
Tones sequence through, holding on
each for a user-selectable period from
3 to 30 seconds with a silent period
between the 15 kHz and 100 Hz tones. A
hold button allows the user to manually
hold a tone. Output via barrier block
terminals.
List $315.00
LowestPrice
only $225!
The RU-MLD4 is a four-channel audio
distribution amplifier. The input and all
four outputs may be connected through
the front-panel XLR jacks or on the
rear panel detachable terminal blocks.
The input accepts either a balanced
microphone or line level signal. Each
of the four outputs provides either a
microphone or line level signal. Both the
front-panel XLR connectors and the rearpanel terminals are active at all times.
The RU-MLD4 may be rack-mounted
with the XLR jacks facing forward.
RUMLD4
List $299.00
LowestPrice
RDL Dual 1x4 Unbalanced
Distribution Amplifier
The RU-UDA4 distribution amp features
dual 1x4 amplifiers; two channels, each
with a single input to 4 outputs; inputs
and outputs are unbalanced -10 dBv with
RCA connectors; unity gain is maintained
on both channels.
RUUDA4
List $195.00
LowestPrice
List $365.00
LowestPrice
only $275!
only $215!
Complete your
purchase with a power
supply and rack shelf
The PS24A is a
24-volt power
supply for RDL
products.
The RURA3 allows
mounting of three
1/3-rack RDL
products in a single
rack space.
PS24A
RURA3
2295
2700
$
List $39.00
List $38.00
LowestPrice
$
from $2295!
only $215!
RDL 1x4 Audio
Distribution Amplifier
RUOSC4A
List $307.00
LowestPrice
4-Channel Mic/Line Mixer
Level Matching Interface
The RU-SX4 is a mono 4x1 audio
switcher for either local or remote
control. It features 4 line level bridging
inputs to a single line level output;
front panel multi-turn trims; solid
state audio switching; multiple
switching control points; remote
source selection via normally open
momentary switch; front-panel LED
indicators show selected source.
only $139!
only $215!
Dual Channel Audio Meter
The RU-SM16 offers precise audio level
metering. Features: 16 segment display
for 2 audio channels; selectable peak
or average metering; peak L+R/L-R
metering; 1/3 rack width.
RUSM16
LowestPrice
List $263.00
only $195!
RDL STICK-ON Series Audio Interfaces
Radio Design Labs Stick-Ons are compact, high-quality audio interface devices
that can be directly and discreetly mounted on equipment, under counter tops, or
combined in rackmount systems. Active units require a 24-volt power supply such as
the PS24A (sold separately). Go online under each model, plus see additional models.
STDA3
STMDA3
STD10K
STD150
STD600
STRX2
STSX4
STMX2
STMX3
STA1
STA1M
STA2A
STMA2
STM2
STPA2
STPA6
STGCA3
STP1
STVP1
STPH1
STACR2
STLCR1
Accessories:
STr19a
PS24A
STPD5
1x3 line level distribution amp
1x3 mic level distribution amp
10K ohm divider/combiner
150 ohm divider/combiner
600 ohm divider/combiner
1x2 audio routing switcher
4x1 audio switcher
2-channel mic/line mixer
Line level mixer
Interface amplifier
Audio line amplifier
Line amplifier
Muting monitor amplifier
Microphone preamplifier
2-watt utility power amplifier
6-watt utility power amplifier
Audio gain control amplifier
Dual attenuator (passive)
Voice-over module
Stereo phone preamp
Audio control relay
Non-latch logic control relay
List $159.00
List $156.00
List $62.00
List $62.00
List $62.00
List $120.00
List $117.00
List $154.00
List $142.00
List $166.00
List $122.00 List $176.00 List $97.00
List $162.00
List $78.00
List $110.00
List $145.00 List $69.00
List $156.00
List $156.00 List $112.00 List $86.00 LowestPrice
12-unit rackmount kit
24-volt power supply
Power 5 units from one supply
10900
10900
$
4600
$
4600
$
4600
$
9000
$
9000
$
13195
$
12181
$
11900
$
8600
$
12500
$
6500
$
16056
$
6000
$
8000
$
12459
$
5000
$
13300
$
11900
$
9900
$
7300
$
$
from $46!
List $152.00 $11200
List $39.00 $2295
List $78.00 $5500
INTERFACE EQUIPMENT
201
order/info: 1·800·426·8434 • www.bswusa.com
Generate, then Analyze
Neutrik Handheld MR Series
Audio Generators and Audio Analyzer
The Neutrik Minirator MR1 audio generator provides a comprehensive set of audio signals for
performance checking, maintenance and repairs. The battery-powered instrument features low
distortion Sine Wave 20 Hz to 20 kHz, white/pink noise, square wave, polarity test and more.
The new MR-PRO is a more powerful analog audio generator that gives you a full range of analog test
signals, including Sine waveforms, sweep signals, white noise, pink noise and more. With its rotary settings
wheel, fast access function keys, a backlit LCD, illuminated mute button, safety hand strap, jack for external
DC power supply and a USB interface for firmware updates, it delivers versatile, efficient performance
every time. Measurement functions include continuous monitoring of the impedance, signal balance and
phantom power of a connected load, and it also functions as a cable analyzer when needed.
The Neutrik Minilyzer ML1 analyzer continuously measures the audio signal and displays the results
on an illuminated high-resolution graphical LC-Display. Optional MiniLINK USB interface and software
(sold separately) allows data acquisition onto a PC. Measures: Level RMS, relative; sound pressure level;
distortion analyzer (THD+N), k2 - k5 harmonics; VU & PPM meter; speaker polarity test (for all speaker
types); signal balance error; 1/3rd octave spectrum RMS & SPL; and Scope.
Accessories:
MR1
List $215.00 $19900
$
MR1POUCH Soft pouch with belt clip
2195
MR-PRO List $525.00 $50500
$
MR1CASE
Compact carrying case
8900
ML1
List $579.00 $56900
MINILINK
USB Link/PC Software for ML1 $34400
LowestPrice
Galaxy
Affordable
SPL Meter
The handy CM130 Sound
Pressure Level (SPL) meter
from Galaxy Audio will
allow you to quickly check
dB levels.
Features:
• Microphone: 1/2"
condenser microphone
• Accuracy: ±2 dB ( under
reference conditions 94
dB @1KHz )
• Level Range:
1 = 40 ~ 70 dB
2 = 60 ~ 90 dB
3 = 80 ~ 110 dB
4 = 100 ~ 130 dB
• Frequency Range:
125 Hz to 8 KHz
CM130
LowestPrice
List $84.99
only $5999!
Galaxy Audio
SPL Meters
CM140
CM150
List $179.99
List $339.00
ML1
Phonic
Audio
Analyzers
The CM140 is a sound
pressure level meter
using a built-in electret
condenser microphone.
It features a digital display
with max/min function,
level range display, AC
signal output, and a
resolution of 0.1 dB. The
CM140 has a dynamic
range of 50 dB and a
frequency range 31.5 Hz-8
kHz. Runs on 9v battery.
Classified as IEC 651 Type
II, ANSI S1.4 Type II.
The new higher-grade
CM150 adds many
additional features
including an RS-232
interface, graph Indication,
auto ranging (30-130 dB),
AC/DC signal output.
LowestPrice
CM140
12999
24900
$
$
The Phonic
PAA2 is a
handheld audio
analyzer with
31-band real
time spectrum
analysis, SPL
and Line meter,
internal noise
generator, EQ setting
program, microphone
calibration and the ability to check
speaker phase. All functions can be
accessed through a central jog dial.
The PAA2 connects instantly to any
desktop or laptop computer via serial
port for easy upload and download of
information. The new PAA3 replaces the
serial interface with a USB interface.
PAA2
List $359.99 $29999
PAA3
List $599.00 $39999
LowestPrice
from $29999!
Whirlwind
Cable Testers
With the Qbox, send a tone or signal over
any XLR line. This battery-powered unit
has a mic, speaker, test tone generator,
headphone jack, a 1/4" jack for line in and
LEDs for confirming phantom power.
The simple Tester provides cable testing
with XLR, 1/4" and phono plugs.
$
QBOX
List $200.00
17900
$
TESTER
List $110.00
6900
LowestPrice
only $69!
from $129 !
99
Rolls
CS1000
Cable Tester
ART CableCop Cable Tester
202
MR-PRO
from $199!
The ART CableCop tests a full selection
of the most popular cables. LEDs on
the CableCop illuminate when the
cable completes a circuit, so you’re
able to tell at a glance which cables
need to be repaired. It also tests cables
with a combination of different ends.
Connectors include male and female XLR,
1/4" balanced/unbalanced, RCA and MIDI.
Ebtech SwizzArmy
Cable Tester
With a connection set that includes XLR,
1/4", RCA, 1/8”, TT and MIDI, the Swizz
Army can be used to tell the exact wiring
of any cable or adaptor. It also features
test tone generation, phantom power
detect and grounded XLR shield detect.
The Rolls CS1000 tests ten cable types
including banana, balanced/unbalanced
1/4" and 1/8”, RCA, Neutrik Speakon, XLR
female, XLR male, MIDI (7 or 5 pin DIN),
RJ11 (telephone), and RJ45 (Ethernet and
CAT-5), with LED indicators. In addition,
the CS1000 features a 1 kHz test tone
oscillator and checks phantom power
voltage and polarity (signals present).
CABLECOP
List $55.00
SWIZZARMY
List $180.00
only $45!
LowestPrice
only $8999!
cs1000
LowestPrice
INTERFACE EQUIPMENT – AUDIO TESTERS
List $167.00
LowestPrice
only $119!
Behringer Cable Tester
The affordable Behringer CT100 tester
accepts XLR, mono and TRS phone (1/4",
1/8", TT), RCA and MIDI. The LED display
shows which input pin is connected to
which output pin. Separate LEDs indicate
proper shield connection and phantom
power presence. The CT100 requires
insertion of only one plug and indicates
shorts and opens, as well a continuity
check. Includes test tone generator.
CT100
LowestPrice
only $2999!
order/info: 1·800·426·8434 • www.bswusa.com
Goldline
Mic Level
Tester
Goldline Audio Test Sets
The Goldline TS1 provides a
combination of three precision
test instruments and is capable of
making audio frequency tests with a
high degree of accuracy and speed.
The TS1 combines a low distortion
oscillator, a frequency counter, and a
dB meter in a compact unit. The TS2
adds an impedance meter.
TS1 List $675.00 $59900
TS2 List $905.00 $78900
LowestPrice
The GL1K is a
microphone
input tester
with a tone
generation and
phantom power detector
built into a standard
3-pin XLR male
connector.
GL1K
LowestPrice
from $419!
Paladin Professional Crimp Kits
only $39!
4601
Paladin
PowerPlay
PT-540
MultiPurpose Tool
1645
The Paladin PowerPlay PT-540 gives you
30 tools in one to handle just about every
electrical wiring application. Its Compound
Leverage System delivers twice the cutting
and gripping power with less hand force.
Includes needle nose and gripping pliers,
wire hook and spudger, Romex and hard
wire cutter, UTP and round cable stripper,
assorted screwdrivers and more.
®
The dbx PB48 is a well-built, reliable patchbay designed
for years of use. It’s user-configurable for half-normalled
or de-normalled, with (48) 1/4" points on the front panel,
connected to (48) 1/4" points on the rear. The PB48 is a
noise-free, versatile patchbay designed to serve all your
patchbay needs, from providing easy access to your
mixer and other studio gear, to facilitating quick and
precise rerouting of devices within your studio setup.
PB48 List $199.95
LowestPrice
only $129!
Standard Split Punchblock
66B350 Punchblock
SA1-100 100 clips
LowestPrice
3400
8
$
LowestPrice
4802
only $11999!
901083
only $34 !
Dual RCA (M) to RCA (M), 3.3 ft.
TRS 1/4" to TRS 1/4", 5 ft.
Dual mono 1/4" (M) both ends, 6.6 ft from $3195!
Hosa Patchbays
from $2999!
Hosa patchbays come in many configurations. The
PHB-265 uses recessed, front switches to select
half-normalled, full-normalled or de-normalled
operation. The PHB300 series patchbays are all
half-normalled configured.
PHB265 48-point, switchable unbalanced 1/4"
List $179.00 $11900
PHB340 48-point unbalanced 1/4"
List $120.00 $8900
PHB350 48-point balanced 1/4"
List $146.00 $9900
PHB360 48-point unbalanced 1/4" to RCA
List $126.00 $8900
LowestPrice
from $89!
Hosa Balanced XLR Patchbay
The Hosa PDR369 is a 12 balanced XLR input
patchbay with female front and male rear
connectors. Shielded wiring.
PDR369
List $190.00
LowestPrice
00
only $99!
Hosa 1/4" TRS
Patch Cables
Hosa Patch Cables
CRA201
CSS105
CPP202
LowestPrice
The Behringer PX2000 1/4" unbalanced) patchbay
features four different modes, easily selectable via
topside switches for the 24 jack pairs: parallel, half
normalized, normalized and open. It’s constructed of
high-quality components: metal encasing and jacks
with metal rings.
The larger PX3000 is a balanced version of the PX2000
with 1/4" TRS jacks.
The economical PX1000 (not shown) operates in five
modes, selected by manually aligning the modules via
an easily-removable front panel. It also features twentyfour 1/4" TRS (balanced) jack pairs.
PX2000 1/4" unbalanced List $64.99 $4999
$
PX3000 1/4" TRS balanced List $64.99
4999
PX1000 1/4" TRS balanced
List $34.99 $2999
LowestPrice
Paladin Professional Crimp Tools
The Paladin Tools 1530R is a professional-grade, all-inone telephone and data crimp tool. It does everything
from Cat-3 to Cat-5e, and crimps RJ22, RJ11/RJ12 and
RJ45 plugs without having to change dies. An advanced
ratchet design and rubber-embedded handles give it an
easy, comfortable crimp cycle. Built-in cutter/stripper.
The 1545 is an economical, all-in-one telephone crimp
tool at a great price, with cutter/stripper.
The 1645 is a professional, open-barrel contact pin
crimper for 30-18 AWG stranded wire. It features a
heavy-duty 1600 series crimp tool with 1645 die set,
precision-calibrated crimp profiles, ultra-smooth ratchet
system, and the lowest handforce required without
compromising force.
1530R Pro telco crimp tool List$126.95 $10995
$
1545
Telco crimp tool
List $39.95
3195
1645
Contact pin crimp tool List$129.95 $11295
Behringer Patchbays
SIEMENS
$ 95
1530R
POWERPLAYPT-540
The 4601 Broadcast Pack is a
complete tool pack featuring
Paladin’s heavy-duty 1600 series
crimp tool and five die sets in a
nylon case. Die sets
included for the
following applications:
RG58, RG59, RG6 and
more. See our website
for more details.
The 901083 Broadcast
Ready Kit includes much
more than just a 1600
series crimper and dies.
You get professional tools for cutting, stripping, crimping and
testing coaxial cable connections, all packed into a padded zipper case.
Includes: round cable cutter, CST stripper with 3 blade cassettes, 1600 series crimp tool
with six die sets, and remote tester. Die sets for RG58, RG59, RG6, RG174 and more.
The affordable 4802 Broadcast Pack features an 8000 series crimp tool and five coax
die sets in a nylon case.
4601
1600 kit
List $244.25 $19500
901083
Broadcast kit List $331.35 $26900 LowestPrice from $129!
dbx Patchbay
1545
(pack of 8)
4
5
$ 99
6
$ 99
$ 99
CSS845 1.5 ft. $1599
CSS890 3 ft. $2199
INTERFACE EQUIPMENT – TOOLS & PATCHBAYS
203
order/info: 1·800·426·8434 • www.bswusa.com
Save on 5-Packs
of XLR Cables!!
Save on 10-Packs
of Connectors!!
Top Mogami XLR
Mic & Patch Cables
Mogami XLR Cables
5-Pack of 25 ft. XLR Cables
Here’s your chance to get quality low-loss 25 ft. mic cables
at a great price! Neutrik XLR connectors. Stock up and get
some for the rest of the station. Incredible five-pack value!
Also available in 10 ft. and 5 ft. five-packs.
SMM25PKG 25 ft. cables List $114.95 $4900
SMM10PK 10 ft. cables List $74.95 $3999
SMM5PK 5 ft. cables
List $59.95 $2499
LowestPrice (5) 25 ft.only $49!
Pro Co Mic Cables – Budget
Need only a single cable? No worry. Budget in price, but
still dependable, these Pro Co StageMaster SMM cables
are built by Neutrik in China. An overmolded boot adds
an excellent strain relief. Spiral shield coverage is 72%.
$ 99
SMM3
3 ft.
5
$ 99
SMM5
5 ft.
5
$ 99
SMM10
10 ft.
8
$
SMM15
15 ft.
1099
$
SMM20
20 ft.
1195
$
SMM25
25 ft.
1299
$
SMM50
50 ft.
2299
Highest-Quality
Broadcast XLR
Cables from Pro Co
Pro Co –
AmeriQuad
When it absolute, positively has
to work! AmeriQuad cables feature
hum-bucking bi-wire geometry for
superior low-noise performance
(20 dB of additional noise
reduction compared to 2-wire
configurations) and deliver crisp,
clean, reliable sound.
AQ5
5 ft $3199
AQ10
10 ft $3599
AQ20
20 ft $4299
AQ25
25 ft $4899
AQ50
50 ft $6999
AQ100
100 ft $11299
Pro Co –
Lifeline
Pro Co Lifelines provides
all the clarity and power you
need for great sounding audio.
Kevlar reinforced for unmatched
strength and dependability. Oversized
jacket, quad wire for noise reduction over
long cable runs, over strain-relieved.
LMC-10
10 ft $2695
LMC-20
20 ft $3395
LMC-25
25 ft $3595
LMC-50
50 ft $4295
204
10-Packs of 1/4" and XLR Connectors
by Neutrik and Switchcraft
XLR Connectors
NC3FX-PK 10-pack Neutrik XLR (F), nickel shell
$31.95
NC3FX-BPK 10-pack Neutrik XLR (F),
black shell/gold cntct
$41.95
NC3MX-PK 10-pack Neutrik XLR (M), nickel shell
$36.95
NC3MXB-PK 10-pack Neutrik XLR (M),
black shell/gold cntct
$55.95
NC3FDL-1PK 10-pack Neutrik XLR (F), nickel, panel mt$31.95
NC3FP-1PK 10-pack Neutrik XLR (F), nickel, panel mt $29.95
A3FPK
10-pack Switchcraft XLR (F)
$37.95
A3MPK 10-pack Switchcraft XLR (M)
$36.95
Mogami has been providing
high-quality mic and patch
cables for over 50 years. Until
now Mogami was only available
to professionals in large bulk
quantities. Now the cable choice
of many pros is available prewired, for all live sound, studio and
broadcast applications. The Gold
Studio series are microphone cables for studio use, with
gold-pin/black body professional XLR connectors wired
with Neglex Studio Quad microphone cable for better
clarity and freedom from noise and RF interference.
Mogami Gold Studio prewired cables are available here
in lengths from 3 to 25 feet.
$
GS3
3 ft
2795
$
GS6
6 ft
2995
$
GS15
15 ft
3895
$
GS25
25 ft
4895
Hosa XLR Cables
1/4" Connectors
NP3CPK 10-pack Neutrik 1/4" TRS plugs
$45.95
190PK 10-pack Switchcraft 1/4" TRS, heavy-duty$59.95
280PK 10-pack Switchcraft 1/4" mono plugs
$19.95
297PK 10-pack Switchcraft 1/4" TRS plugs
$45.95
3502PK 10-pack Switchcraft RCA plug, cable mt. $19.95
LowestPrice 10-packs from $1995!
Pro Co – Excellines
This cable offers superior
transient response
for a quick, yet natural sound.
With genuine Neutrik XLR
connectors and ArmorFlex outer
jacket, this cable is built for years
of rugged use.
$
EXM5
5 ft
1699
$
EXM10
10 ft
1899
$
EXM20
20 ft
2199
$
EXM25
25 ft
2499
$
EXM50
50 ft
3599
EXM100
100 ft $5599
Monster –
Studio Pro
Three Time Correct
multiple gauge
wire networks for
extreme accuracy
in imaging, depth,
and soundstage.
MicroFiber
dielectric
reduces highfrequency
loss and increases transient response time. Heavy-duty
black Neutrik XLRs with 24k hard gold contacts. Heavyduty black nylon mesh jacket provides maximum
durability and visual appeal. MultiTwist construction
with dense 97% copper braided shielding to reduce
the effects of EMI and RFI. Carbon-infused polymer
minimizes handling and vibration noise.
$
SP1000-M-10
10 ft
7995
$
SP1000-M-20
20 ft
12995
$
SP1000-M-30
30 ft
19995
INTERFACE EQUIPMENT – CABLES & CONNECTORS
Hosa CMK Series are meant to take a pounding. They call
it robust. We call it rugged. Braided shield, 20 awg.
$
CMK005 5 ft
2299
$
CMK010 10 ft
2599
$
CMK025 25 ft
3499
$
CMK075 75 ft
6799
Monster –
Performer
Heavy-duty black Neutrik XLR
connectors provide durability
and a professional look. Carbon
polymer shielding around
conductors minimizes handling
noise. MicroFiber dielectric
increases clarity and transient
response time. High density
braided shield reduces interference. Duraflex jacket
offers maximum flexibility and durability, performance
after performance. Two Time Correct multiple gauge
wire networks for an even frequency response and
accurate phase reproduction.
$
P500M-10 10 ft
3995
$
P500-M20 20 ft
5995
$
P500-M30 30 ft
7995
$
P500-M50 50 ft
11995
Monster – Standard
Twisted pair construction
reduces audio bandwidth
distortions for better
clarity. 92% coverage
copper-braided shield
rejects RFI and EMI for
a lower noise floor and
increased resolution.
Interchangeable color O-ring attaches to each XLR
connector for easy identification. Extra-flexible outer
jacket for superior reliability and cut resistance.
Heavy-duty, molded connector increases durability.
S100-M-10
10 ft $2195
S100-M-20
20 ft $2995
S100-M-30
30 ft $3995
S100-M-50
50 ft $5995
order/info: 1·800·426·8434 • www.bswusa.com
Specialty XLR Cables
10 ft. Coiled Cable
Great for ENG applications, BSW
offers a retractable, coiled cable
with Neutrik connectors.
BSWMC24
2.5 ft-10ft $3900
6 ft. XLR-F to Mini 1/8"
Handy for those portable
recorders that offer low-z
inputs on a 1/8" connector.
$
IC6
6 ft
1295
Digital Cables for Fiber-Optic,
Toslink, USB, AES/EBU, and S/PDIF
Toslink Cables
Fiber-Optic Cables
Hosa:
3 ft. . .....................................OPT103 .......................... $10.99
6 ft. . .....................................OPT106 .......................... $14.99
10 ft......................................OPT110 .......................... $20.99
17 ft. ....................................OPT117 .......................... $27.99
USB 2.0 Cables A/B Connectors
5 ft. . .....................................USB205AB........................$6.99
10 ft......................................USB210AB .......................$7.99
15 ft......................................USB215AB .......................$9.95
Pro Co MasterMike
XLR Male-to-XLR Angled
Female, 25 ft. cable
The perfect cable for
your on-air broadcast
mic. Made to the same
rugged specs as the
AmeriQuad (opposite page),
except with a 2-conductor/91% shield, the MasterMike
delivers high reliability and clear sound.
$
MFRC-25
25 ft.
4899
AES/EBU Cables XLR-F/XLR-M
Hosa:
3 ft. . ...................................AES003 . ........................... $18.99
5 ft. . ..................................AES005 . ........................... $23.99
10 ft. ..................................AES010 . ........................... $36.99
Monster:
3.3 ft. .................................MDGAES-1M ................... $49.95
6.6 ft. .................................... MDGAES-2M ................... $64.95
13.2 ft. . .............................. MDGAES-4M ................... $99.95
Whirlwind Connect Series Snakes
Whirlwind’s Connect
Series snakes are
economical, yet have
features found in their
higher-end snakes:
Fanouts with multiple
layers of rugged heat
shrink at the most
critical points; metal
wire mesh strain relief
and grip on the box —
­ not the plastic type found on
other economy snakes. Connections are hand soldered,
not crimped, to the XLRs. Fanout XLRs with metal shells
and 360 degree chuck-style strain relief.
SNK164XL100...................16x4, 100 ft....................$359.00
SNK244XL100...................24x4, 100 ft....................$519.00
S/PDIF Cables RCA/RCA
Hosa:
3.3 ft. .................................DRA501 ............................ $9.99
6.6 ft....................................DRA502 .......................... $10.99
13.2 ft. ................................DRA503 .......................... $11.99
Monster:
3.3 ft.....................................IDL100-1M....................... $39.95
6.6 ft. ...................................IDL100-2M....................... $49.95
13.2 ft. ................................IDL100-4M..................... $59.95
Hosa 8-Channel Snakes
(See even more snakes on page 174)
1/4" - 1/4" Mono
Unbalanced 1/4" phone males to unbalanced 1/4"
phone males. Each channel individually numbered.
CPP803 9.9 ft $2299
CPP804 13.2 ft $2599
CPP805 16.5 ft $2899
1/4" - RCA Mono
Hosa SNU Series Snakes
Stage Box Snakes: with Locking Connectors
Hosa’s SNU Series is serious snake for not so serious
cash. Go online for all the details.
FEATURES
• Neutrik metal base locking XLR females
• Neutrik nylon locking 1/4" phone females
• Neutrik nickel XLR males on fanout
• Neutrik balanced TRS 1/4" phone males on fanout
SNU 12X4 50.................... 50 ft.............$289.00
SNU 12X4 100................ 100 ft.............$399.00
SNU 16X4 50.................... 50 ft . ...........$379.00
SNU 16X4 100 ............... 100 ft . ...........$499.00
SNU 24X4 50.................... 50 ft . ...........$519.00
SNU 24X4 100 ............... 100 ft . ...........$689.00
Unbalanced 1/4" phone
males to RCA males.
Each channel individually
numbered.
CPR803 9.9 ft $2199
CPR804 13.2 ft $2499
CPR805 16.5 ft $2799
3 ft. . ....................................OPM303 ......................... $12.99
5 ft........................................OPM305 ......................... $13.99
10 ft. ....................................OPM310 ......................... $18.99
MIDI Cables
Hosa Molded Black
3 ft........ MID-303 ...........$4.99
5 ft........ MID-305 ...........$5.99
10 ft...... MID-310 ...........$6.99
25 ft...... MID-325 ........ $10.99
Hosa Speaker Cables
12 AWG (x2)
Speakon to Speakon
SKT-205 (5 ft.) .................$19.99
SKT-210 (10 ft.) ...............$23.99
SKT-225 (25 ft.) ...............$36.99
SKT-250 (50 ft.) ...............$61.99
SKT-275 (75 ft.) ...............$92.99
SKT-2100 (100 ft.).........$111.99
Speakon to Banana
SKT-210BN (10 ft.) . ........$19.99
SKT-225BN (25 ft.) . ........$34.99
SKT-250BN (50 ft.) .........$59.99
SKT-2100BN (100 ft.)....$109.99
Speakon to 1/4" Male
SKT-210Q (10 ft.) ............$19.99
SKT-225Q (25 ft.) ............$34.99
SKT-250Q (50 ft.) ............$59.99
SKT-2100Q (100 ft.) . ....$109.99
14 AWG (x2)
Speakon to Speakon
SKT-405 (5 ft.) .................$14.99
SKT-410 (10 ft.) ...............$18.99
SKT-425 (25 ft.) ...............$27.99
SKT-450 (50 ft.) ...............$43.99
Speakon to Banana
SKT-405BN (5 ft.) ............$11.99
SKT-410BN (10 ft.) . ........$15.99
SKT-425BN (25 ft.) . ........$24.99
SKT-450BN (50 ft.) . ........$40.99
Speakon to 1/4" Male
SKT-405Q (5 ft.) ..............$11.99
SKT-410Q (10 ft.) ............$15.99
SKT-425Q (25 ft.) ............$24.99
SKT-450Q (50 ft.) ............$40.99
Clear Jacket, 1/4" to 1/4", 12 AWG (x2)
SKM-205 (5 ft.) ................$10.99
SKM-210 (10 ft.) . ............$14.99
SKM-225 (25 ft.) . ............$28.99
SKM-250 (50 ft.) . ............$50.99
SKM-2100 (100 ft.)..........$94.99
Clear Jacket, 1/4" to 1/4", 16 AWG (x2)
SKM-605 (5 ft.)................... $6.99
SKM-610 (10 ft.)................ $7.99
SKM-625 (25 ft.)..............$12.99
SKM-650 (50 ft.)..............$22.99
SKM-6100 (100 ft.) .........$41.99
1/4" TRS - 1/4" TRS
1/4" to 1/4", 12 AWG (x2)
RCA - RCA
SKJ-405 (5 ft.) . .................. $8.99
SKJ-410 (10 ft.) ..............$12.99
SKJ-425 (25 ft.) ...............$21.99
SKJ-450 (50 ft.) ...............$36.99
SKJ-4100 (100 ft.)............$66.99
Balanced 1/4" TRS males to
balanced 1/4" TRS males. Each
channel individually numbered.
CSS802 6.6 ft $2799
CSS803 9.9 ft $3099
CSS804 13.2 ft $3599
CSS805 16.5 ft $3899
Unbalanced RCA males to
RCA males. Each channel
individually numbered.
CRA803 9.9 ft $1999
CRA804 13.2 ft $2399
SKJ-205 (5 ft.)..................$10.99
SKJ-210 (10 ft.)................$15.99
SKJ-225 (25 ft.)................$28.99
SKJ-250 (50 ft.)................$51.99
SKJ-2100 (100 ft.) . .........$96.99
1/4" to 1/4", 14 AWG (x2)
1/4" to 1/4", 16 AWG (x2)
SKJ-605 (5 ft.) . .................. $6.99
SKJ-610 (10 ft.) ................. $8.99
SKJ-625 (25 ft.) ...............$15.99
SKJ-650 (50 ft.) ...............$27.99
SKJ-6100 (100 ft.)............$50.99
INTERFACE EQUIPMENT – CABLES & CONNECTORS
205
order/info: 1·800·426·8434 • www.bswusa.com
Hosa Adapters, Couplers and Cables
Hosa Audio Interconnect Cables
1/4"-to-1/4" TRS (Stereo) heavy-duty cables
with serviceable metal 1/4" plug headshells.
RCA-M-to-RCA-M Single
3 ft.................................. CRA103 . ............................... $3.99
5 ft. . ............................... CRA105 . ............................... $3.99
10 ft................................ CRA110 . ............................... $4.99
3 ft. . ......................................CSS503 ............................... $5.99
5 ft. ........................................CSS505 ............................... $6.99
10 ft. ......................................CSS510 ............................... $7.99
20 ft........................................CSS520 ............................... $9.99
RCA-M-to-RCA-M Dual
3.3 ft............................... CRA201 . ............................... $4.99
6.6 ft............................... CRA202 . ............................... $5.99
9.9 ft............................... CRA203 . ............................... $6.99
13.2 ft............................. CRA204 . ............................... $8.99
1/4"-to-1/4" TRS (Stereo) heavy-duty dual
cables with serviceable metal 1/4" plug
headshells.
3 ft .........................................CSS403 .............................$10.99
5 ft .........................................CSS405 .............................$11.99
10 ft .......................................CSS410 .............................$13.99
20 ft........................................CSS420 .............................$18.99
3.5 mm (1/8") Cables
CMM103 CMM110 CMP110 CMP153 CMR203 CMR206 CMR210 CMS103 CMS105 XVM105 3 ft. TRS 3.5mm (M) to (F) 10 ft. TRS 3.5mm (M) to (F) 10' TRS 3.5mm M to mono 1/4" M 3' TRS 3.5 M to dual mono 1/4" M 3' TRS 3.5mm (M) to dual RCA (M) 6' TRS 3.5mm (M) to dual RCA (M)
10' TRS 3.5mm (M) to dual RCA M
3' TRS 3.5mm (M) to TRS 1/4" (M) 5' TRS 3.5mm (M) to dual RCA M
5' TRS 3.5mm rt. ang. (M) to XLR F
3.5 mm (1/8")Adapters
GMP112 GPM103 GRM114 GRM193 TRS 1/4" (F) to TRS 3.5 mm (M) TRS 1/4" (M) to TRS 3.5 mm (F) RCA (F) to mono 3.5 mm (2-pack) TRS 3.5mm (M) to dual RCA (F) $5.99
$7.99
$7.99
$7.99
$6.99
$7.99
$8.99
$6.99
$6.99
$11.99
$3.99
$3.99
$4.99
$4.99
RCA-M-to-RCA-M Dual Heavy-Duty w/Metal
Housing
w/Nickel Plate
3 ft. . .......CRA403......... $7.99
5 ft. . ........CRA405......... $7.99
10 ft. .......CRA410....... $10.99
15 ft. .......CRA415....... $12.99
w/Gold Plate
CRA403G.......... $9.99
CRA405G........$10.99
CRA410G........$12.99
CRA415G........$14.99
RCA-M-to-1/4" M Single Cables
3 ft.................................. CPR103 ................................. $3.99
5 ft. . ............................... CPR105 ................................. $3.99
10 ft................................ CPR110 ................................. $4.99
XLR-F-to-1/4" (Mono) Cables
w/Molded 1/4"
5 ft. . ........PXF105.......... $8.99
10 ft. .......PXF110.......... $9.99
15 ft. .......PXF115........ $10.99
w/Metal Housing 1/4"
PXF305.......... $9.99
PXF310........$10.99
PXF315........$11.99
XLR-M-to-1/4" (Mono) Cables
w/Molded 1/4"
5 ft. . .......PXM105........ $8.99
10 ft. .......PXM110........ $9.99
15 ft. .......PXM115...... $10.99
w/Metal Housing 1/4"
PXM305.......... $9.99
PXM310........$10.99
PXM315........$11.99
GPP105 1/4" (F) to 1/4" (F) stereo or mono GPR101 RCA (F) to 1/4" (M) (2-pack) RCA Adapters/Couplers
GRA101 RCA (F) to RCA (F) coupler NBR253 RCA (F) to BNC
XLR Adapters/Couplers
RCA-M-to-1/4" M Dual Cables
6.6 ft............................... CPR202 ................................. $6.99
9.9 ft............................... CPR203 ................................. $7.99
13.2 ft............................. CPR204 ................................. $8.99
1/4" Adapters/Couplers
XLR-F-to-1/4" M TRS Cables
w/Molded 1/4"
3 ft. . .......STX103F........ $8.99
5 ft. . ........STX105F........ $9.99
10 ft. .......STX110F...... $10.99
15 ft. .......STX115F...... $11.99
w/Metal Housing 1/4"
STX303F........$10.99
STX305F........$10.99
STX310F........$11.99
STX315F........$11.99
GLT255 GXF132 GXJ183 GXJ235 GXM133 GXP143 GXP246 GXX144 GXX145 GXX195 XLR (F) to XLR (M) with ground lift RCA (F) to XLR (F)
TRS 1/4"(F) to XLR (F)
TRS 1/4"(F) to XLR (M)
RCA (F) to XLR (M)
XLR (F) to 1/4" (M)
XLR (M) to TRS 1/4" (M)
XLR (M) to XLR (M) coupler
XLR (F) to XLR (F) coupler
XLR (F) to XLR (M) phase reverser
$4.99
$4.99
$4.99
$3.99
$9.99
$9.99
$10.99
$8.99
$8.99
$9.99
$10.99
$9.99
$11.99
$9.99
RCA-M-to-1/4" M Dual Cables w/Metal Housing
w/Nickel Plate
3 ft. . .......CPR403......... $7.99
10 ft. .......CPR410....... $10.99
15 ft. .......CPR415....... $12.99
w/Gold Plate
CPR403G........$10.99
CPR410G........$13.99
CPR415G........$15.99
XLR-M-to-1/4" M TRS Cables
w/Molded 1/4"
3 ft. . .......STX103M...... $8.99
5 ft. . ........STX105M...... $9.99
10 ft. .......STX110M.... $10.99
15 ft. .......STX115M.... $11.99
w/Metal Housing 1/4"
STX303M........$10.99
STX305M........$10.99
STX310M........$11.99
STX315M........$11.99
1/4"M-to-1/4" M Single Cables
3 ft. . ............................... CPP103................................... $3.99
5 ft. . ............................... CPP105 .................................. $3.99
10 ft. .............................. CPP110 .................................. $5.99
XLR-F-to-RCA Cables
w/Regular Cable
5 ft. . ........XRF105.......... $8.99
10 ft. .......XRF110.......... $9.99
15 ft. .......XRF115........ $10.99
w/Heavy-Duty Cable
XRF305.......... $9.99
XRF310........$10.99
XRF315........$11.99
1/4"M-to-1/4" M Dual Cables
6.6 ft. ............................. CPP202 .................................. $6.99
9.9 ft. ............................. CPP203 .................................. $7.99
XLR-M-to-RCA Cables
w/Regular Cable
5 ft. . ........XRM105........ $7.99
10 ft. .......XRM110........ $8.99
15 ft. .......XRM115........ $9.99
1/4"M-to-1/4"M TRS (Stereo) Dual Cables
6.6 ft............................... CSS202 ...............................$10.99
9.9 ft............................... CSS203 ...............................$11.99
5 ft....................................CPP405G................................$12.99
10 ft .................................CPP410G................................$14.99
3 ft.................................... CSS103 . ................................... $4.99
5 ft. .................................. CSS105 . ................................... $5.99
10 ft. ................................ CSS110 . ................................... $5.99
15 ft. ................................ CSS115 . ................................... $6.99
206
YPP111 1/4 (M) to dual mono 1/4"(F) $5.99
YPP117 TRS 1/4 (M) to dual mono 1/4"(F) $5.99
YPP118 TRS 1/4 (M) to dual mono TRS1/4"(F) $5.99
YMM261 TRS 3.5mm (M) to dual mono 3.5mm (F) $5.99
YPR102 TRS 1/4" (M) to dual RCA (F) $4.99
YPR103 1/4" (M) to dual RCA (F)
$3.99
YPR124 1/4" (M) to dual RCA (M) $3.99
YPR257 TRS 1/4" (F) to dual RCA (M) $5.99
YRA104 RCA (M) to dual RCA (F) $3.99
YRA105 RCA (F) to dual RCA (M) $3.99
YRA154 TRS 3.5mm (M) to dual RCA (F) $4.99
YXL119 XLR (M) to dual XLR (F) 6" $12.99
YXM121 XLR (F) to dual XLR (M) 6"
$11.99
YXF247 TRS 3.5mm rt. ang. (M) to dual XLR (F) 6"$15.99
w/Heavy-Duty Cable
XRM305.......... $9.99
XRM310........$10.99
XRM315........$11.99
1/4" M-to-1/4" M Dual Cables Metal Housing,
Gold Plated
1/4"M-to-1/4"M TRS (Stereo) Single Cables
Y-Adapter
1/4"M-to-1/4"M TRS (Stereo) Dual Cables
w/ Metal Housing
w/Nickel Plate
3 ft. . .......CSS403........ $10.99
10 ft. .......CSS410........ $13.99
w/Gold Plate
CSS403G........$14.99
CSS410G........$17.99
INTERFACE EQUIPMENT – CABLES & CONNECTORS
Speakon Connectors
by Neutrik
Speakon Connectors
NL4FC Neutrik Speakon connector
$5.99
NL4MM Neutrik Speakon male-to-male adapter $7.99
order/info: 1·800·426·8434 • www.bswusa.com
*Speaker Cable Continued
Hosa Patch Cables
CRA201
CSS105
CPP202
*Studio Cable
Dual RCA (M) to RCA (M), 3.3 ft.
TRS 1/4" to TRS 1/4", 5 ft.
Dual mono 1/4" (M) both ends, 6.6 ft 4
5
$ 99
6
$ 99
$ 99
Hosa 1/4" TRS
Patch Cables
(pack of 8)
CSS845 1.5 ft. $1599
CSS890 3 ft. $2199
Cable Ties
Keeping your cables organized is only
one of about a million things you can
do with these heavy-duty cable ties. Black.
$ 95
CT100-4
100 4" Ties
8
$
CT100-8
100 8" Ties
1095
$
CT100-8R 100 8" Reuseable Ties 1495
Console Tape
Knowing who's who while recording
them is always a good thing. So is not
having ugly residue on your channel
strips. This is what you need. Low tack.
Bright white. Write on it, and peel it off
with no side-effects when you're done.
CONSOLETAPE White, 1" wide $879
Gaffer’s Tape
Permacel’s professional
gaffer’s tape leaves no
residue on surface or cables,
is 2" wide/180' long, and comes in black and gray.
665B Black $1995
$
665G Gray
1995
Gator Rolling
Cable Caddy
Hauling your cables and snakes to
the remote site just got easier with
the new GX20 Cable Caddy. The
GX20 features a compartment in the
bottom of the case to house small
snakes and all sorts of miscellaneous
cabling. A deep lift out tray on
the top holds smaller cables and
accessories. And a front zipper
pocket is perfect for accessories. Get
one for the remote truck today.
GX20
List $179.99
LowestPrice
only $11999!
*Digital Cable
Gepco
DS401
DS401D
DS601
DS601D
DS608
DS616
DS624
Mogami
W3080
Belden
1800B
110 ohm 24 AWG 1 pair
110 ohm 24 AWG 2 pair
110 ohm 26 AWG 1 pair
110 ohm 26 AWG 2 pair
110 ohm 26 AWG 8 pair
110 ohm 26 AWG
16 pair
110 ohm 26 AWG
24 pair
Per Ft 250 Ft 500 Ft 1000 Ft
x
x
x
x
x
x
x
x
x
x
x
Per Ft 164 Ft 328 Ft 500 Ft
110 ohm 25 AWG 1 pair
x
x
Per Ft 250 Ft 500 Ft 1000 Ft
110 ohm 24 AWG 1 pair
x
x
Foil shield
Gepco
Per ft 250 Ft 500 Ft 1000 Ft
2 Conductor 22 AWG cable with foil shield and drain wire.
Available on a spool or in a box (GP)
61801EZ-0
Black
x
61801EZ-1
Brown
x
61801EZ-2
Red
x
61801EZ-3
Orange
x
61801EZ-4
Yellow
x
61801EZ-5
Green
x
61801EZ-6
Blue
x
61801EZ-7
Violet
x
61801EZ-8
Grey
x
61801EZ-9
White
x
Dual 2 conductor 22 AWG cable with foil shield and drain wire, Zip style.
D61801EZGF
1000 Ft
x
x
D61801EZGFGP 1000 Ft box
x
x
Mogami
Per Ft 164 Ft 328 Ft 656 Ft
2 Conductor 26 AWG with spiral shield and drain wire.
2944-00
Black
x
x
x
2944-01
Brown
x
x
x
2944-02
Red
x
x
x
2944-04
Yellow
x
x
x
2944-05
Green
x
x
x
2944-06
Blue
x
x
x
2944-07
Violet
x
x
x
2944-08
Grey
x
x
x
2944-09
White
x
x
x
Belden
Per Ft 250 Ft 500 Ft 1000 Ft
2 Conductor 22 AWG cable with foil shield and drain wire.
8451BLKBOX
1000 Ft. Black in box
x
8451GRAY
1000 Ft. Gray in box
x
*Microphone Cable
2 conductor standard microphone cable
Belden
Per Ft
8412
20 AWG braided shield
Gepco
Per Ft
MP1022
24 AWG braided shield.
x
XB201M
22 AWG braided shield.
x
Mogami
Per Ft
W2791
24 AWG braided shield.
Broadcast
W2552
26 AWG spiral shield.
Superflexible.
W2549
22 AWG spiral shield
4 conductor "Quad" microphone cable
Belden
Per Ft
1192A
24 AWG braided shield
Canare
Per Ft
L4E6S-BLACK
21 AWG braided shield
L4E6S-BLUE
21 AWG braided shield
L4E6S-BROWN 21 AWG braided shield
L4E6S-GREEN
21 AWG braided shield
L4E6S-GREY
21 AWG braided shield
L4E6S-ORANGE 21 AWG braided shield
L4E6S-PURPLE 21 AWG braided shield
L4E6S-RED
21 AWG braided shield
L4E6S-YELLOW 21 AWG braided shield
L4E6S-WHITE
21 AWG braided shield
Gepco
Per Ft
MP1201
24 AWG braided shield.
x
250 Ft 500 Ft 1000 Ft
x
250 Ft 500 Ft 1000 Ft
x
x
164 Ft 328 Ft 656 Ft
x
x
x
x
x
250 Ft 500 Ft 1000 Ft
x
164 Ft 328 Ft 656 Ft
x
x
x
x
x
x
x
x
x
x
250 Ft 500 Ft 1000 Ft
x
x
*Speaker Cable
Belden
5000UE
5100UE
5200UE
2 conductor 12 AWG,
gray jacket
2 conductor 14 AWG,
gray jacket
2 conductor 16 AWG,
gray jacket
Per Ft 50 Ft
x
100 Ft 1000 Ft
x
*Multipair Cable
Gepco
Per Ft 250 Ft 500 Ft 1000 Ft
Gep-Flex low noise snake cable with foil shield
GA61802GF
2 Pair 22 AWG cable
x
GA61804GF
4 Pair 22 AWG cable
x
GA61806GF
6 Pair 22 AWG cable
x
GA61808GF
8 Pair 22 AWG cable
x
GA618012GF
12 Pair 22 AWG cable
x
GA618016GF
16 Pair 22 AWG cable
x
GA61820GF
20 Pair 22 AWG cable
x
GA61826GF
26 Pair 22 AWG cable
x
GA61832GF
32 Pair 22 AWG cable
x
Gep-Flex low noise snake cable with foil shield, thin profile, 24 AWG
GA72402GFC
2 Pair 24 AWG cable
x
GA72404GFC
4 Pair 24 AWG cable
x
GA72408GF
8 Pair 24 AWG cable
x
GA72412GFC
12 Pair 24 AWG cable
x
GA72416GFC
16 Pair 24 AWG cable
x
GA72426GFC
26 Pair 24 AWG cable
x
GA72432GFC
32 Pair 24 AWG cable
x
Mogami
Per Ft 164 Ft 328 Ft 500 Ft
W2930
2 Pair EZ/ID multipair
x
x
x
cable, spiral shield
W2931
4 Pair EZ/ID multipair
x
x
x
cable, spiral shield
W2932
8 Pair EZ/ID multipair
x
x
x
cable, spiral shield
W2933
12 Pair EZ/ID multipair
x
x
x
cable, spiral shield
W2934
16 Pair EZ/ID multipair
x
x
x
cable, spiral shield
W2935
20 Pair EZ/ID multipair
x
x
x
cable, spiral shield
W2936
24 Pair EZ/ID multipair
x
x
x
cable, spiral shield
*Cat 5/Cat 6
Gepco
CT504-360
CT504-360P
CT604-250
CT604-250P
Belden
1583A
1700A
1701A
x
x
*Coax
x
x
Gepco
VPM2000
VSD2001
VB18Q
Gepco
Per Ft 250 Ft 500 Ft 1000 Ft
High definition cable with clear jacket
1200
2 conductor 12 AWG
x
x
1400
2 conductor 14 AWG
x
x
1600
2 conductor 16 AWG
x
x
Call or visit BSWUSA.COM for
discount pricing on bulk cable.
GSC1020FC
2 conductor 10 AWG
x
x
GSC1220FC
2 conductor 12 AWG
x
x
Portable cable, black jacket
GSC132
2 conductor 13 AWG
x
x
GSC134
4 conductor 13 AWG
x
x
Mogami
Per Ft 164 Ft 328 Ft 500 Ft
W3103
2 conductor 11 AWG
x
x
black jacket
W3104
4 conductor 11 AWG
x
x
black jacket
W2921
4 conductor 13 AWG
x
black jacket
W3082
2 conductor 14 AWG
x
x
COAX speaker cable
Monster
SP1000-S-250 Studio Pro 1000 Speaker Cable. 250 ft.
P500-5-250
Performer 500 Speaker Cable. 250 ft.
XP-CBIG100
Clear jacketed cable. 100 ft spool.
Belden
9913
7810A
4 Pair 24 AWG Cat 5e
4 Pair 24 AWG Cat 5e
Plenum
4 Pair 23 AWG Cat 6
4 Pair 23 AWG Cat 6
Plenum
4 Pair 24 AWG Cat 5e
4 Pair 24 AWG Cat 5e
4 Pair 24 AWG Cat 5e
Plenum
RG-59 75 ohm 20 AWG
RG-6 75 ohm 18 AWG
RG-6 75 ohm 18 AWG
Quad shield
RG-8 50 ohm 10 AWG
solid center
RG-8 50 ohm 10 AWG
solid center low loss
Per Ft 250 Ft 500 Ft 1000 Ft
x
x
x
x
x
x
Per Ft 250 Ft 500 Ft 1000 Ft
x
x
x
Per Ft 250 Ft 500 Ft 1000 Ft
x
x
x
x
x
x
Per Ft 250 Ft 500 Ft 1000 Ft
x
x
x
*Please note that wire and connectors are not returnable.
INTERFACE EQUIPMENT – BULK CABLE
207
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement