ALINCO DJ-580 Programming Shortcuts

ALINCO DJ-580 Programming Shortcuts
ALINCO DJ-580 Programming Shortcuts



To program a memory channel it must first be clear.
To clear or erase a memory channel.
o Select VHF or UHF
o Press the ‘D’ key
o Rotate the Dial to memory channel to clear
o Press & Hold the Function Key then press the ‘D’ key. The 2 digit channel
number should now flash.
o Memory channel can now be programmed.
To program a cleared memory channel for repeater use.
o Set the frequency
 Select VHF or UHF
 Press the ‘D’ key
 Key in the frequency
 Press TX key to exit this option
o Set the TX Offset shift
 Hold the Function key and press #1 key for correct offset
frequency and direction ( + or - )
 Press TX key to exit this option
o Set the Tone Frequency for repeater
 Hold the Function key and press #4 key
 Use the Tuning know to select the correct Tone frequency
 Press TX key to exit this option
o Set the TXSQL
 Hold the Function key and press #6 until the ‘T’ only shows on the
VHF side of display
 Press TX key to exit this option
o SAVE Programmed data into memory
 Hold the Function key and press the ‘D’ key
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement