The new class of measurement GlucoMen® LX Plus: The new class of measurement Ketone measurement with the GlucoMen® LX b-Ketone Sensor test strip The ketone alarm warns of the potential to develop a diabetic ketoacidosis 5 markers for glucose results Test strip eject button Rubber coating for easier handling (handgrip, keys, 4 non-slip feeds) Minimal blood volume for glucose measurement required - enables mild and flexible blood taking Just 4 seconds needed to measure the blood glucose Easier with no coding GlucoMen® LX Plus: Blood glucose measurement GlucoMen® LX Sensor test strips… 4. Apply the blood to the front edge of the test strip. The blood drop symbol flashes until sufficient blood volume has been applied. • Suitable for blood glucose measurement only in conjunction with GlucoMen® LX Plus. • Each test strip is for single use only. Insert this end into the meter 5. After 4 seconds, the blood glucose value is shown in the display including date and time. The result is automatically stored. Apply a blood drop to the front edge of the test strip 1. Insert the GlucoMen® LX Sensor test strip into the top of the GlucoMen® LX Plus meter. 2. After the meter has completed its self-test, “Glu” (for glucose measurement) appears in the top left corner, and lower down a flashing blood drop symbol is visible. The GlucoMen® LX Plus is ready to take a measurement. 6. If the marking functions have been activated, the glucose result can be marked by pressing the left / right key [ ] and be confirmed then by pressing the mode key [ ] (see “Additional functions”). eject button 3. Use the lancing device GlucoJect® Dual S for preparation of a blood drop. mg/dl 7. To remove the test strip hygienically push the test strip eject button (located on the backside of the meter). n GlucoMen® LX Plus: GlucoMen® LX Plus: GlucoMen® LX b-Ketone Sensor test strips To view the set up menu, press the mode key [ ] for 3 seconds. To alter the flashing setting, press the left / right key [ ]. To confirm a setting and to switch between the menu items, briefly press the mode key [ ]. To switch the meter off [ ], press the mode key for 2 seconds. b-ketone measurement • Suitable for b-ketone measurement only in conjunction with GlucoMen® LX Plus. • Each test strip is for single use only. Basic Set up Settings as they appear in the menu Insert this end into the meter Apply a blood drop to the front edge of the test strip 1. Insert the GlucoMen® LX b-Ketone Sensor test strip into the top of the GlucoMen® LX Plus meter. 2. After the meter has completed its self-test, “Ket” (for ketone measurement) appears at the top, and lower down on the left a flashing blood drop symbol is visible. The GlucoMen® LX Plus is ready to take a measurement. 3. and 4. As for "blood glucose measurement" (see above). 5. After 10 seconds, the b-ketone value is shown on the display including date and time. The result is automatically stored. 6. To remove the test strip hygienically push the test strip eject button (as for “blood glucose measurement”, point 7). Setting time Display Hour (flashing) "14":00 Minute (flashing) 14:"00" Setting date Display Year (flashing) 01.06."2011" Month (flashing) 01."06".2011 Day (flashing) "01".06.2011 Setting beep Display Acoust. beep on "on" (beep) Acoust. beep off "off" Setting result marking Result marker on Result marker off Display "on" "off" Setting ketone alarm Ketone alarm on Ketone alarm off Display "on" "off" Setting End (end of set up mode) Display "End" GlucoMen® LX Plus: Additional functions Marking of blood glucose results Ketone alarm While the blood glucose value is being displayed, and prior to removing the test strip, the glucose result can be marked by selecting the marker or appropriate symbol (see below) with the left / right key [ ] and confirming with the mode key [ ]. A measurement taken "before meal" is indicated with a whole fish. If this marker is confirmed, an alarm bell appears in front of the fish. By confirming, an alarm is set to sound 2.5 hours after meal as a reminder to take a blood glucose measurement. If the alarm option is not required, the left / right key [ ] must be pressed. The alarm bell disappears. The marker for measurements "after meal" is a "fishbone" symbol. The marker for measurements "during or after physical exercise" has an "athlete" for a symbol. Measurements can be marked with a "tick" to indicate "special situations". Values with this symbol are not included in the average calculations. If the ketone alarm is activated in the set up menu and a blood glucose level of ≥ 250 mg / dL is measured, the ketone alarm is given. A beep is to be heard and a line runs on the display from left to right. Automatically storage of up to 400 glucose results To view the memory, which is available only when the GlucoMen® LX Plus is switched off, briefly press the mode key [ ]. To view the stored blood glucose and b-ketone values plus markers chronologically, press the left / right key [ ]. To display the average blood glucose results from 1, 7, 14 and 30 days, the mode key [ ] must be pressed repeatedly. A flashing alarm bell in the 1-day average display indicates that the reminder for measurement after meal is activated. The alarm can be deactivated by pressing the left key [ ].
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project