OASE PondoVac 3 Pond vacuum Gebrauchsanleitung

Below you will find brief information for Pond Vacuum PondoVac 3. This manual covers the setup, operation, and maintenance of the OASE PondoVac 3 pond vacuum. Learn how to use it as a sludge suction unit or wet vacuum cleaner, and understand the various tools included for different cleaning tasks. The manual also provides troubleshooting tips and safety information.

PDF Download
Document
OASE PondoVac 3 Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Powerful motor
  • Large collection container
  • Variety of tools
  • Extension tube
  • Automatic mode
  • Easy to use
  • Easy to clean

Frequently asked questions

Place the unit at a minimum distance of 2m from the water. Route the drain hose with a slight gravity. Ensure that the drain opening is above the water level. Plug the drain hose into the drain opening of the collection container. Ensure that the hose lies straight. Allow unrestricted draining of the water, which has to be disposed of in accordance with the local conditions.

Place the unit at a minimum distance of 2m from the water. Seal the drain opening of the collection container by means of the plug. Use of the universal tool to remove pond sludge without taking in the pond gravel. Use a thread algae tool to separate and remove thread algae. Use the wet suction tool to remove soiled water or residual water. Always work slowly, performing smooth, uniform movements. This largely prevents sediments from being swirled up.

Vapour escapes from the unit, the unit develops noise and/or heavy vibration, the unit does not suck or its performance reduces, the container does not empty, poor unit switching behaviour between the containers, or no switch-over.

Switch the unit off at the power switch and pull out the power plug. Remove all hoses. Unlock the container lock. Remove the motor housing. Flush the inner tank, but do not remove. Unlock the engagement plates beneath the foam filters. Remove the foam filters and wash out with clean water. Check the condition of the foam filters. Check the condition of the rubber seals.

Empty out the collection container and clean the unit. Store in a dry, frost protected room, inaccessible to children.
Preparing document for printing…
0%