Altec Lansing inMotion IM310

Altec Lansing inMotion IM310
User’s guide
Caution: To prevent the risk of electric
shock, do not remove cover (or back).
No user-serviceable parts inside. Refer
servicing to qualified service personnel.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
14. Unplug this apparatus during lightning storms or when
unused for long periods of time.
CAUTION
To prevent electric shock do not use this (polarized) plug with
an extension cord, receptacle or other outlet unless the blades
can be fully inserted to prevent blade exposure.
15. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped. For service, refer to qualified service personnel,
return to the dealer, or call the Altec Lansing service line
for assistance.
WARNING
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
IMPORTANT SAFETY INSTRUCTIONS
16. For products which incorporate batteries, please refer to
local regulations for proper battery disposal.
1. Read these instructions.
2. Keep these instructions.
17. Only use attachments/accessories specified by the
manufacturer.
3. Heed all warnings.
4. Follow all instructions.
18. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
5. Do not use this apparatus near water – This apparatus
shall not be exposed to dripping or splashing, and no
objects filled with liquids, such as vases, shall be placed
on the apparatus.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
The apparatus should not be situated on a bed, sofa,
rug or similar surface that may block the ventilation
openings. The apparatus must not be placed in a built-in
installation, such as a closed bookcase or cabinet that
may impede the flow of air through the ventilation
openings. Ventilation should not be impeded by
covering the openings with items such as newspapers,
tablecloths, curtains, etc.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. No naked flame sources, such as lighted candles, should
be placed on the apparatus.
10. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for the replacement of the obsolete
outlet.
11. Protect the power cord from being walked on or
pinched – particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
12. Do not install in an area which impedes the access to
the power plug. Disconnecting the power plug is the
only way to completely remove power to the product
and must be readily accessible at all times.
13. Power source – Use only power supplies of the type
specified in the operating instructions or as marked on
the appliance. If a separate power supply is included
with this apparatus, do not substitute with any other
power supply – use only manufacturer-provided power
supplies.
1
English
The lightning flash with arrowhead, within
an equilateral triangle, is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
Altec Lansing One Year Limited Warranty
(Two-Year Limited Warranty In the European Union
and Asia)
Customer Service
The answers to most setup and performance questions can be
found in the Troubleshooting
guide. You can also consult the FAQs in the customer support
section of our Web site at
www.alteclansing.com. If you live in North America and still
can’t find the information you need, please call our customer
service team for assistance before returning the speakers to
your retailer under their return policy.
What Does The Warranty Cover?: Altec Lansing warrants
that its products shall be free from defects in materials or
workmanship, with the exceptions stated below.
What Is The Period Of Coverage?: For units purchased in
European Union or Asia, this warranty runs for two years
from the date of purchase. For units not purchased in Europe
or Asia, this warranty runs for one year from the date of
purchase. The term of any warranties implied by law shall
expire when your limited warranty expires. Some states and/or
Member States in the European Union do not allow limitations
on how long an implied warranty lasts, so the above limitation
may not apply to you.
Tel: 800-258-3288
Email: [email protected]
If you live outside of North America, please visit our website
at www.alteclansing.com and select your region to locate
your country’s distributor.
For the most up-to-date information, be sure to check our
Web site at www.alteclansing.com.
What Does The Warranty Not Cover?: This warranty does
not cover any defect, malfunction or failure that occurs
as a result of: improper installation; misuse or failure to
follow the product directions; abuse; or use with improper,
unintended or faulty equipment. (For information on proper
installation, operation and use consult the manual supplied
with the product. If you require a replacement manual, you
may download a manual from www.alteclansing.com.) Also,
consequential and incidental damages are not recoverable
under this warranty. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
International Distribution
International customers: For information regarding the
distribution of Altec Lansing products in your country, please
visit www.alteclansing.com and click on your region.
Disposal of Old Electrical & Electronic Equipment
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and
human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of
materials will help to conserve natural resources. For more
detailed information about recycling of this product, please
contact your local city office or your household waste disposal
service.
What Will Altec Lansing Do To Correct The Problem?: Altec
Lansing will, at its option, repair or replace any product that
proves to be defective in material or workmanship. If your
product is no longer being manufactured, or is out of stock,
at its option, Altec Lansing may replace your product with a
similar or better Altec Lansing product.
How To Get Warranty Service: To get a covered product
repaired or replaced, you must contact Altec Lansing during
the warranty period by email ([email protected]).
You must include in your email, your name, address, email
address, telephone number, date of purchase and a complete
description of the problem you are experiencing. In the
United States, you may alternatively contact Altec Lansing
by telephone at 1-800-ALTEC88 — please be prepared to
provide the same information. If the problem appears to be
related to a defect in material or workmanship, Altec Lansing
will provide you a return authorization and instructions for
return shipment. Return shipments shall be at the customer’s
expense, and the return must be accompanied by the
original proof of purchase. You should insure the shipment as
appropriate because you are responsible for the product until
it arrives at Altec Lansing.
How Will State Law Affect Your Rights?: This warranty
gives you specific legal rights, and you may also have other
rights which vary from state to state. Please note that in the
European Union, you as a consumer might have other legal
rights under national legislation of European Union Member
States governing the sale of Altec Lansing’s goods. Those rights
are not affected by this guarantee.
The above limited warranties and remedies are sole warranties
and remedies available to purchaser, if, and to the extent, valid
and enforceable under the applicable law.
2
inMotion iM310 Digital Speaker System
Thank you for purchasing the Altec Lansing
iM310 digital speaker system for iPod® –
affordable, amazing sound for music lovers
who listen with their eyes as well as their
ears! This new addition to the inMotion family
offers big sound with stylish portability. The
iM310 provides outstanding acoustic volume
and audio performance for your iPod/MP3
player previously unavailable at this size or
value. With powerful, crystal-clear sound and
surprisingly deep bass, the foldable design is
ready to let you share your tunes anywhere
you like!
Dock your iPod by sliding your iPod on top of
the iM310 docking station. If necessary, first
install the docking adapter that came with
your iPod or with this unit. While the docking
adapter is not required for proper functioning of
your iPod and iM310, it will provide a better fit.
Note: Alternate audio sources – such as nondockable iPod models, CD players, MP3 players,
portable DVD players, and laptops – can also
be connected to the inMotion iM310. For more
information, see the “Connecting to alternate
audio source” section.
Box Contents
Power
• inMotion iM310 portable speaker system
• Docking adapters for iPod models
Use one of the following two options to power
your inMotion iM310:
• Power supply
AC (Wall outlet) Power
• User’s guide and quick connect instructions
Insert the barrel connector from the power
supply into the DC connector on the rear of the
inMotion iM310. After this connection is made,
insert the power supply into a wall outlet.
Made for:
DC (Battery) Power
Install three AA batteries (not included) into
the battery compartment on the bottom of
the inMotion iM310. Make sure the batteries
are installed as illustrated in the battery
compartment.
• iPod touch
• iPod nano (3rd generation)
• iPod classic
Start Playing
• iPod nano (2nd generation)
• iPod with video
1.Turn on your iPod.
• iPod nano (1st generation)
2.Turn on the inMotion iM310 by pushing the
power button located on the left side of the
top of the inMotion iM310. The indicator
light turns on.
• iPod with color display
• iPod with dock connector
• iPod mini
Note: To avoid hearing a popping sound when
you turn on your inMotion iM310, turn your
iPod on first.
Placing the inMotion iM310
Open the inMotion iM310 by pressing the
button on the front of the speaker system.
Position the inMotion iM310 on a level surface,
preferably close to you (within three feet).
3
English
Assembling the inMotion iM310
Portable Sound for a Compact Budget
Power Off
Turn off the inMotion iM310 by pushing the
power button located on the left side of the
top of the inMotion iM310. The indicator light
shuts off.
Auto Shut-down (Standby)
The inMotion iM310 automatically shuts down
if no audio is detected for three minutes.
NOTE: The Auto Shut-down (Standby) feature
is active during battery-only operation. If the
AC wall adapter is used, the inMotion iM310
will remain on as long as the power switch is
in the “On” position.
Connecting to alternate
audio source
The inMotion iM310 system includes an input
jack that allows you to connect to alternate
audio sources, such as non-dockable iPod
models, CD players, MP3 players, portable DVD
players, and laptops. To connect the iM310 to an
alternate audio source, follow the steps below.
1.Locate a 3.5 mm stereo cable (sold
separately).
2.Connect one end of the 3.5 mm stereo cable
into the auxiliary input jack (AUX) located
on the back of the inMotion iM310 system,
and the other end to the headphone or line
out jack on your alternate audio device.
3.Set the volume on the audio source at
mid‑level.
4.Set the volume on the inMotion iM310
at minimum level and adjust upward to a
comfortable listening level.
Volume
The slider on the top of the inMotion iM310
is the master volume control for the speaker
system. Move the slider to the right to
increase the volume or to the left to decrease
the volume.
4
Troubleshooting
Possible Problem
Solution
No power
indicator light
is on (AC
Operation).
The iM310 may not be properly
connected to a wall outlet.
See proper AC Power instructions in the
“Power” section of this manual.
The surge protector (if used) may Make sure the surge protector is switched on.
not be powered on.
The wall outlet may not be
functioning.
Plug another device into the same wall
outlet to confirm the outlet is working.
The power may not be turned on. See instructions in the “Start Playing”
section of this manual.
No power
indicator light
is on (Battery
Operation).
The batteries may not be
installed properly.
See proper DC Power instructions in the
“Power” section of this manual.
The power may not be turned on. See instructions in the “Start Playing”
section of this manual.
There is no
The volume may be set too low.
sound is coming
from speakers.
There is a
crackling sound
coming from
speakers.
To increase the volume, see instructions in
the “Volume” section of this manual.
If using an alternate audio source, see
instructions regarding volume level in the
“Connecting to alternate audio source”
section of this manual.
The iPod may not be correctly
seated into the docking station.
Turn off the iPod, remove it from the docking
station, reseat it, and turn it on again.
If using an alternate audio
source, the audio source may
not be properly connected to the
inMotion iM310 or there may
be a problem with the alternate
audio source.
• See instructions in the “Connecting to
alternate audio source” section of this
manual.
• Trying using another audio source.
The iPod may not be correctly
seated into the docking station.
Turn off the iPod, remove it from the docking
station, reseat it, and turn it on again.
If using an alternate audio
source, the audio source may
not be properly connected to the
inMotion iM310 or there may
be a problem with the alternate
audio source.
• See instructions in the “Connecting to
alternate audio source” section of this
manual.
• Trying using another audio source.
5
English
Symptom
Symptom
Possible Problem
Solution
There is a
crackling sound
coming from
speakers (when
connected to
PC or laptop).
The operating system’s volume
level may be set too high.
Check the operating system volume level
and decrease it if necessary.
The sound is
distorted.
The inMotion iM310’s volume
level may be set too high.
To lower the volume, see instructions in the
“Volume” section of this manual.
There is radio
interference.
The unit may be too close to a
radio tower.
Move the unit to see if the interference
goes away.
There is
intermittent
buzzing
The unit may be located too close Move the GSM cell phone away from
to a GSM cell phone.
the unit.
6
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod
and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Patents pending.
© 2008 Plantronics, Inc. All rights reserved.
Altec, Altec Lansing, inMotion, and the Altec Lansing inMotion logo
are registered trademarks or trademarks of Altec Lansing.
Plantronics, the logo design and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
All other trademarks appearing herein are the property of their respective owners.
Designed by Altec Lansing in the USA. Made in China.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareillage digital de Classe B est conforme au ICES-003 canadien.
HEADQUARTERS: 535 Rte. 6 & 209, Milford, PA 18337-0277 • 800-ALTEC-88 • 570-296-4434 • Fax 570-296-6887
EUROPE: 13 Rue Beaumont, L-1219 Luxembourg, Luxembourg
ASIA/PACIFIC: 25 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong
Engineered in USA. Made in China
A12785 R01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement