Internet - Comwave
Internet
Installation Guide
Package Contents
Package Contents
COMWAVE SR35ON
INTERNET MODEM
ETHERNET CABLE
1
2
3 4
POWER ADAPTER
OUTPUT: 12V
TELEPHONE CORD
1 DSL
Connect your Comwave Internet Modem to your Internet Line
using the Telephone Cord supplied.
2 LAN
Connect to your computer using the Ethernet Cable supplied.
3 DC 12V Connect to a power source using the Power Adapter supplied.
2 x INTERNET FILTER
4 Switch Power the Comwave Internet Modem on or off.
LED Light Indicators
Upon completion of set
up, the following LED
lights should be on.
Note: Indicator will
only be lit when WiFi is
enabled.
Installation
Computer
step
3
step
2
Comwave
Home Phone Adapter
Wi-Fi
Telephone
Phone Jack
Internet
Line
Internet
Modem
step
4
Power Outlet
step
Continue to 1
step
To begin installation, shut down your computer.
step
Connect the Comwave Internet Modem using the
supplied telephone cord to the phone jack.
step
Connect the supplied Ethernet Cable from the LAN port
of the Comwave Internet Modem to your computer.
step
(For Home Phone) Connect the supplied Ethernet cable
from the LAN port of your Comwave Internet Modem to
the WAN port of the Home Phone Adapter.
step
Connect the Comwave Internet Modem to a power outlet
Note: Wait until the LED Light Indicators on your
Comwave Internet Modem indicate that the Modem is
operational. This may take up to 5 minutes.
step
(For Home Phone) Connect a telephone to the PHONE 1
port on the Home Phone Adapter.
Then connect power to the Home Phone Adapter and
wait 5 minutes for dial tone.
DO NOT DISCONNECT POWER as it may damage the
Home Phone Adapter.
1
2
3
4
5
6
step
7
step
8
Can’t access the Internet?
1 Unplug the power to your
Comwave Internet Modem,
Home Phone Adapter and shut
down your computer.
2 Wait 30 seconds and then
plug your Comwave Internet
Modem’s Power Cord back into
the power outlet.
3 Wait until the LED Light
Indicators on your Comwave
Internet Modem indicate that
the Modem is operational. This
may take up to 5 minutes.
4 Start your computer and Home
Phone Adapter.
5 Open your browser and start
surfing the web.
6 Still unable to surf the Internet?
Call us at 1-866-210-9149.
Start your computer.
You should be able to browse the internet instantly.
We’ll get you back
up online!
Wi-Fi Settings
CAUTION
Your Comwave Internet
Modem is already Wi-Fi
enabled by Comwave. We do
not recommend making any
changes to the default settings.
Only advanced users should
attempt to make changes or
shut off the Wi-Fi settings by
following the steps below.
step
Ensure your Computer is directly
connected to your Internet
Modem before you begin.
step
Open your Internet browser and
type http://192.168.17.1 in the
address bar.
step
Enter your Username and
Password. This was provided in
your Welcome Letter by email.
Click “Login” to proceed.
1
2
3
step
Click on Wireless in the Local
Network box on the left.
step
Use caution when making the
following changes:
• Disable your Wi-Fi
• Change your SSID*
• Change your Security Type
• Choose your Wireless Key
4
5
step
6
Save
Click Save.
Generate Wireless Key
*
SSID (Service Set Identifier) is the name of your Wireless Network
Watch our step by step
videos at
www.comwave.net/videos
SR350N
Need more help?
1-866-210-9149
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising