NPF-90D-12 Datasheet

NPF-90D-12 Datasheet
NPF-90D
90W Single Output LED Driver
F
110
M
M
SELV
series
IP67
■ Features
Plastic housing with class II design
Built-in active PFC function
Class 2 power unit (except NPF-90D-12/15)
Standby power consumption <0.5W
IP67 rating for indoor or outdoor installations
Function: 3 in 1 dimming (dim-to-off)
Typical lifetime >50000hours
5 years warranty
■ Applications
LED panel lighting
LED downlight
LED decorative lighting
LED tunnel lighting
Moving sign
■ Description
NPF-90D series is a 90W AC/DC LED driver featuring the constant current mode output.
NPF-90D operates from 90~305VAC and offers models with different rated voltage ranging
between 12V and 54V. Thanks to the high efficiency up to 90%, with the fanless design, the
entire series is able to operate for -40~+85℃ case temperature under free air convection.
The entire series is rated with IP67 ingress protection level and is suitable to work for a variety
of applications at dry, damp or wet locations. NPF-90D is equipped with the 3 in 1 dimming
function so as to provide the design flexibility for LED lighting system.
■ Model Encoding
NPF - 90 D - 20
Output voltage(12,15,20,24,30,36,42,48,54V)
Built-in 3 in 1 dimming function
Rated wattage
Series name
File Name:NPF-90D-SPEC 2016-07-01
NPF-90D
90W Single Output LED Driver
series
SPECIFICATION
MODEL
OUTPUT
NPF-90D-12
NPF-90D-15
NPF-90D-20
NPF-90D-24
NPF-90D-30
NPF-90D-36
NPF-90D-42
NPF-90D-48
NPF-90D-54
RATED CURRENT
7.5A
6A
4.5A
3.75A
3A
2.5A
2.15A
1.88A
1.67A
RATED POWER
90W
90W
90W
90.3W
90.24W
90.18W
CONSTANT CURRENT REGION 7.2 ~ 12V
90W
90W
90W
9 ~ 15V
12 ~ 20V
14.4 ~ 24V 18 ~ 30V
CURRENT RIPPLE
5.0% max. @rated current
CURRENT TOLERANCE
±5.0%
SET UP TIME
500ms/115VAC, 230VAC
Note.3
VOLTAGE RANGE
Note.2
21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V
90 ~ 305VAC
127 ~ 431VDC
(Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF≧0.98/115VAC, PF≧0.96/230VAC, PF≧0.94/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION
THD< 20%(@load≧60%/115VC, 230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY(Typ.)
88%
INPUT
89%
90%
90%
89%
90%
90%
AC CURRENT (Typ.)
0.95A / 115VAC
INRUSH CURRENT(Typ.)
COLD START 60A(twidth=550μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
0.5A / 230VAC
90%
90%
54 ~ 60V
59 ~ 66V
0.4A / 277VAC
MAX. NO. of PSUs on 16A 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
CIRCUIT BREAKER
LEAKAGE CURRENT
<0.25mA / 277VAC
STANDBY POWER CONSUMPTION <0.5W
OVER CURRENT
PROTECTION
SHORT CIRCUIT
17.5 ~ 21V 23 ~ 27V
28 ~ 34V
34 ~ 40V
41 ~ 46V
46 ~ 54V
Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover
WORKING TEMP.
Tcase=-40 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.
Tcase=+85℃
20 ~ 95% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP67 approved ;
Design refer to EN60335-1
I/P-O/P:3.75KVAC
ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to EN55015, EN61000-3-2 Class C (@ load≧60%) ; EN61000-3-3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity Line-Line 2KV)
MTBF
916.7K hrs min.
OTHERS DIMENSION
PACKING
NOTE
Hiccup mode, recovers automatically after fault condition is removed
OVER TEMPERATURE
SAFETY & WITHSTAND VOLTAGE
EMC
Constant current limiting, recovers automatically after fault condition is removed
15 ~ 17V
OVER VOLTAGE
ENVIRONMENT
95 ~ 108%
Telcordia SR-332 (Bellcore) ; 231.2K hrs min.
MIL-HDBK-217F (25℃)
171*63*37.5mm (L*W*H)
0.77Kg; 18pcs/14.9Kg/0.82CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
4. The standby power consumption is specified for 230VAC.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. The model certified for CCC(GB19510.14, GB19510.1, GB17743 and GB17625.1) is an optional model . Please contact MEAN WELL for details.
7. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃
or less.
8. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
File Name:NPF-90D-SPEC 2016-07-01
NPF-90D
90W Single Output LED Driver
series
BLOCK DIAGRAM
PFC fosc : 50~120KHz
PWM fosc : 60~130KHz
EMI FILTER
&
RECTIFIERS
I/P
POWER
SWITCHING
PFC
CIRCUIT
Vo+
Vo-
RECTIFIERS
&
FILTER
DIM+
DIM-
O.L.P.
O.T.P.
O.L.P.
PWM & PFC
CONTROL
DETECTION
CIRCUIT
O.V.P.
DRIVING METHODS OF LED MODULE
※ This series works in constant current mode to directly drive the LEDs.
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
100
Vo(%)
Constant
Current area
Should there be any compatibility issues, please contact MEAN WELL.
60
(min.)
Hiccup
Protection
50
100
Io (%)
Typical LED power supply I-V curve
File Name:NPF-90D-SPEC 2016-07-01
NPF-90D
90W Single Output LED Driver
series
DIMMING OPERATION
AC/L(Brown)
AC/N(Blue)
DIM+(Blue)
DIM-(White)
NPF-90D
Vo+(Red)
Vo-(Black)
※ 3 in 1 dimming function
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
Dimming source current from power supply: 100μA (typ.)
◎ Applying additive 0 ~ 10VDC
100%
90%
Vo-
+
+
-
-
DIM+
+
Output current (%)
80%
Vo+
70%
60%
50%
40%
30%
Additive Voltage
-
20%
DIM-
10%
“DO NOT connect "DIM- to Vo-"
0%
0V 1V
2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
100%
90%
Vo-
+
+
-
-
DIM+
Output current (%)
80%
Vo+
70%
60%
50%
40%
30%
Additive PWM signal
20%
DIM-
10%
“DO NOT connect "DIM- to Vo-"
0%
◎ Applying additive resistance:
100%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input
90%
Vo-
80%
+
-
-
DIM+
Additive Resistance
Output current (%)
Vo+
+
70%
60%
50%
40%
30%
DIM“DO NOT connect "DIM- to Vo-"
20%
10%
0%
Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized dimming operation )
Dimming input: Additive resistance
Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< I out<6%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.
File Name:NPF-90D-SPEC 2016-07-01
NPF-90D
90W Single Output LED Driver
series
OUTPUT LOAD vs TEMPERATURE
100
100
80
80
230VAC
Input only
60
LOAD (%)
60
50
LOAD (%)
230VAC
Input only
40
20
-40
-25
-10
0
15
30
50
60
70
40
20
(HORIZONTAL)
-40
-25
0
20
45
AMBIENT TEMPERATURE,Ta (℃)
55
65
75
85 (HORIZONTAL)
Tcase (℃)
STATIC CHARACTERISTIC
POWER FACTOR (PF) CHARACTERISTIC
※ Tcase at 75℃
100
90
80
PF
LOAD (%)
70
60
50
40
1.00
0.95
0.90
0.85
0.80
0.75
0.70
0.65
0.60
0.55
0.50
0.45
0.40
0.35
0.30
277VAC
230VAC
115VAC
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
90
100
125
135
145
155 165
175
180
200
230
(90W)
305
INPUT VOLTAGE (V) 60Hz
LOAD
※ De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
EFFICIENCY vs LOAD
NPF-90D series possess superior working efficiency that up to 90.5% can
be reached in field applications.
※ 48V Model, Tcase at 75℃
THD
22%
20%
18%
16%
14%
12%
10%
277VAC
230VAC
115VAC
8%
6%
4%
2%
0%
50%
60%
70%
LOAD
80%
90%
100%
EFFICIENCY(%)
※ 48V Model, Tcase at 75℃
92%
91%
90%
89%
88%
87%
86%
85%
84%
83%
82%
277VAC
230VAC
115VAC
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
File Name:NPF-90D-SPEC 2016-07-01
NPF-90D
90W Single Output LED Driver
series
LIFE TIME
120
LIFETIME(Kh)
100
80
60
40
20
0
25
35
45
55
65
75
85
Tcase (℃ )
File Name:NPF-90D-SPEC 2016-07-01
NPF-90D
90W Single Output LED Driver
MECHANICAL SPECIFICATION
Case No. PWM-90P
series
Unit:mm
171
5
5
300±20
63
SJTW 18AWG×2C
tc
85.5
31.5
AC/L(Brown)
AC/N(Blue)
300±20
UL2464 18AWG×2C
SJTW 16AWG×2C
5
5
2 -ψ
DIM+(Blue)
DIM-(White)
Vo+(Red)
Vo-(Black)
4.5
: Max. Case Temperature
37.5
tc
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
File Name:NPF-90D-SPEC 2016-07-01
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Mean Well:
NPF-90D-12 NPF-90D-24 NPF-90D-20 NPF-90D-54 NPF-90D-36 NPF-90D-30 NPF-90D-42 NPF-90D-48 NPF90D-15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising