Philips 42PFL5603H 42" DVB-T MPEG4 LCD TV User manual

Add to my manuals
62 Pages

advertisement

Philips 42PFL5603H 42
1 Addendum
Enlarge teletext pages
The section “Enlarge teletext pages” in this
user manual instructs you to press OPTION
to enlarge teletext pages.
Use dual screen teletext
The section “Use dual screen teletext” in this
user manual instructs you to press Dual
screen to display normal teletext when dual
screen teletext is enabled.
After updating the TV software (to version
64.67.3 or higher), Dual screen can no
longer be used to display normal teletext.
Use the following instructions in place of the
original instructions:
1
2
After updating the TV software (to version
64.67.3 or higher), OPTION can no longer be
used to enlarge teletext pages.
Use the following instructions in place of the
original instructions to enlarge teletext pages:
1
2
3
4
5
Press TELETEXT and select a teletext
page.
Press
(Picture format) to enlarge the
top part of the page.
Press
(Picture format) again to view
the enlarged lower part of the page.
Press
page.
to scroll through the enlarged
Press
(Picture format) again to return
to the normal page size.
Press Dual screen on your remote
control to enable dual screen teletext.
Press Dual screen again to exit
teletext.
Register your product and get support at
www.philips.com/welcome
EN
USER MANUAL
Model
Serial
www.philips.com/support
Österreich
0810 000205
€0.07 pro Minute
België/Belgique
078250145
€0.06 Per minuut/Par minute
България
+3592 489 99 96
Местен разговор
Hrvatska
01 3033 754
Lokalni poziv
Česká republika
800142840
Bezplatný hovor
Danmark
3525 8759
Lokalt opkald
Suomi
09 2311 3415
paikallispuhelu
France
0821 611655
€0.09 Par minute
Deutschland
01803 386 852
€0.09 pro Minute
Ελλάδα
0 0800 3122 1280
Κλήση χωρίς χρέωση
Magyarország
0680018189
Ingyenes hívás
Ireland
0800 055 6882
Free call
Italia
848390207
€0.08 Al minuto
Luxemburg/
Luxembourg
40 6661 5644
Ortsgespräch/
Appel local
Nederland
0900 8407
€0.10 Per minuut
Norge
2270 8111
Lokalsamtale
Polska
0223491504
połączenie lokalne
Portugal
2 1359 1442
Chamada local
România
1-203-2060
Apel local
Россия
(495) 961-1111
Местный звонок
Србија
+381 114 440 841
Lokalni poziv
Slovensko
0800 004537
Bezplatný hovor
Slovenija
01 280 95 22
lokalni klic
España
902 888 784
€0.10 Por minuto
Sverige
08 5792 9100
Lokalsamtal
Suisse/Schweiz/
Svizzera
0844 800 544
Appel local/Ortsgespräch/
Chiamata locale
Türkiye
0800 261 3302
Şehiriçi arama
United Kingdom
0870 900 9070
Local call
Україна
044 254 2392
Місцевий виклик
This information is correct at the time of press. For updated contact information, refer to
www.philips.com/flavors.
Table of contents
1 Important������������������������������������������� 3
1.1 Safety���������������������������������������������������� 3
1.2 Screen care������������������������������������������ 4
1.3 Environmental care������������������������������ 4
5.12 Update your TV software������������������ 30
6 Install channels��������������������������������� 32
6.1 Automatically install channels������������ 32
6.2 Manually install channels�������������������� 33
6.3 Rename channels ������������������������������ 34
6.4 Uninstall or reinstall channels ���������� 34
2 Your TV����������������������������������������������� 5
6.5 Rearrange channels���������������������������� 34
2.1 TV overview���������������������������������������� 5
6.6 Manually update the channel list ������ 35
3 Get started����������������������������������������� 7
3.1 Position the TV������������������������������������ 7
3.2 Wall mount the TV������������������������������ 7
6.7 Test digital reception ������������������������ 35
6.8 Start a demo�������������������������������������� 35
6.9 Reset TV to factory settings�������������� 36
3.3 Connect the antenna cable ���������������� 9
7 Connect devices������������������������������� 37
3.4 Connect the mains cord���������������������� 9
7.1 Connection overview������������������������ 37
3.5 Insert the remote control batteries�� 10
7.2 Select connection quality������������������ 38
3.6 Switch on the TV ������������������������������ 10
7.3 Connect devices�������������������������������� 40
3.7 First time setup��������������������������������� 10
7.4 Setup devices ������������������������������������ 44
4 Use your TV ������������������������������������� 11
4.1 Switch your TV on/off or to standby 11
7.5 Use Philips EasyLink�������������������������� 45
7.6 Prepare TV for digital services���������� 45
4.2 Watch TV ������������������������������������������ 12
8 Technical specifications������������������� 47
4.3 Access DVB-C and DVB-T channel
networks���������������������������������������������������� 12
9 Troubleshooting ����������������������������� 48
4.4 Use teletext �������������������������������������� 13
9.1 General TV issues ���������������������������� 48
5 Use more of your TV����������������������� 14
9.3 Picture issues ������������������������������������ 48
5.1 Remote control overview ���������������� 14
5.2 Use TV menus������������������������������������ 16
5.3 Adjust picture and sound settings���� 18
5.4 Change to Shop or Home mode������ 22
5.5 Use advanced teletext features �������� 22
5.6 Create favorite lists �������������������������� 24
5.7 Use the Electronic Programme Guide
�������������������������������������������������������������������� 25
5.8 Use timers and Child lock���������������� 26
5.9 Use subtitles�������������������������������������� 27
5.10 View photos and listen to music������ 28
5.11 Listen to digital radio channels��������� 30
9.2 TV channel issues������������������������������ 48
9.4 Sound issues�������������������������������������� 49
9.5 HDMI connection issues ������������������ 49
9.6 USB connection issues���������������������� 50
9.7 PC connection issues ���������������������� 50
9.8 Contact us ��������������������������������������������
10 Index����������������������������������������������������� 2008 © Koninklijke Philips
Electronics N.V. All rights reserved.
Specifications are subject to change
without notice. Trademarks are
the property of Koninklijke Philips
Electronics N.V. or their respective
owners.
Philips reserves the right to change
products at any time without being
obliged to adjust earlier supplies
accordingly.
The material in this manual is
believed adequate for the intended
use of the system. If the product, or
its individual modules or procedures,
are used for purposes other than
those specified herein, confirmation
of their validity and suitability must
be obtained. Philips warrants that
the material itself does not infringe
any United States patents. No
further warranty is expressed or
implied.
Warranty
No components are userserviceable. Do not open or remove
covers to the inside of the product.
Repairs may only be done by Philips
Service Centres and official repair
shops. Failure to do so shall void
any warranty, stated or implied.
Any operation expressly prohibited
in this manual, any adjustments,
or assembly procedures not
recommended or authorised in this
manual shall void the warranty.
Pixel characteristics
This LCD product has a high
number of colour pixels. Although
it has effective pixels of 99,999% or
more, black dots or bright points of
light (red, green or blue) may appear
constantly on the screen. This is a
structural property of the display
(within common industry standards)
and is not a malfunction.
Open source software
This television contains open
source software. Philips hereby
offers to deliver or make available,
upon request, for a charge no
more than the cost of physically
performing source distribution, a
complete machine-readable copy
of the corresponding source code
on a medium customarily used for
software interchange.
This offer is valid for a period of 3
years after the date of purchase of
this product. To obtain the source
code, write to
Philips Consumer Lifestyle
Development Manager
LoB Mainstream Displays
620A Lorong 1, Toa Payoh
Singapore 319762
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many
products targeted at consumers,
which, like any electronic apparatus,
in general have the ability to emit
and receive electromagnetic signals.
One of Philips’ leading Business
Principles is to take all necessary
health and safety measures for
our products, to comply with all
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
Philips is committed to develop,
produce and market products that
cause no adverse health effects.
Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
integration in its products.
Mains fuse (UK only)
This TV is fitted with an approved
moulded plug. Should it become
necessary to replace the mains fuse,
this must be replaced with a fuse of
the same value as indicated on the
plug (example 10A).
1. Remove fuse cover and fuse.
2. The replacement fuse must
comply with BS 1362 and have
the ASTA approval mark. If the
fuse is lost, contact your dealer in
order to verify the correct type.
3. Refit the fuse cover.
In order to maintain conformity
to the EMC directive, the mains
plug on this product must not be
detached from the mains cord.
Copyright
VESA, FDMI and the VESA Mounting
Compliant logo are trademarks of
the Video Electronics Standards
Association.
Manufactured under license from
Dolby Laboratories. ‘Dolby’, ‘Pro
Logic’ and the double D symbol
G, are trademarks of Dolby
Laboratories.
Manufactured under license from
BBE Sound, Inc. Licensed by BBE, Inc
under one or more of the following
US patents: 5510752,5736897. BBE
and BBE symbol are registered
trademarks of BBE Sound Inc.
Windows Media is either a
registered trademark or trademark
of Microsoft Corporation in
the United States and/or other
countries.
® Kensington and Micro Saver
are registered US trademarks of
ACCO World Corporation with
issued registrations and pending
applications in other countries
throughout the world. All other
registered and unregistered
trademarks are the property of their
respective owners.
Important
Congratulations on your purchase and
welcome to Philips!
Read this user manual before you start to use
this product.
Pay close attention to this section and follow
the safety and screen care instructions. The
product warranty does not apply if damage is
caused by failing to follow these instructions.
To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
The model and serial number of your TV can
be found on the back and side of the TV as well
as on the packaging.
1.1 Safety
• Two people are required to lift and carry a
TV that weighs more than 25 kilos (55lb).
Improper handling of the TV can result in
serious injury.
• If transporting the TV in low temperatures
(less than 5°C), open the box and wait until
the TV matches the ambient temperature
of the room before unpacking.
• To avoid short circuit, do not expose the
TV, remote control or remote control
batteries to rain or water.
• Do not place vessels of water or other
liquids on top of or near the TV. Spilling
liquids on the TV can cause electric shock.
If liquids are spilt on the TV, do not operate
the TV. Immediately disconnect the TV from
the mains and have the TV checked by a
qualified technician.
• To avoid risk of fire or electric shock, do
not place the TV, remote control or remote
control batteries near naked flame sources
(e.g. lighted candles) and other heat sources
including direct sunlight.
• Do not install the TV in a confined space
such as a bookcase. Leave a space of at
least 10cm (four inches) around the TV
for ventilation. Be sure air flow is not
obstructed.
• If placing the TV on a flat, solid surface be
sure to use only the supplied stand. Do not
move the TV if the stand is not properly
screwed to the TV.
• Wall mounting of the TV should only be
performed by qualified personnel. The TV
must only be mounted on an appropriate
wall bracket and on a wall that can safely
hold the weight of the TV. Improper wall
mounting can result in severe injury or
damage. Do not attempt to wall mount the
TV yourself.
• If the TV is mounted on a swivel base or
swivel arm, ensure no strain is placed on
the power cord when the TV is swivelled.
Strain on the power cord can loosen
connections and cause arcing or fire.
• Disconnect the TV from the mains and
antenna before lightning storms. During
lightning storms do not touch any part of
the TV, mains cord or antenna cable.
• Be sure that you have full access to the
mains cord for easy disconnection of the
TV from the mains.
• When disconnecting the TV from the mains,
be sure to:
1. Turn off the TV, then the mains power (if
available).
2. Unplug the mains cord from the mains
socket outlet.
EN-3
ENglish
1
3. Unplug the mains cord from the power
connector at the back of the TV.
Always pull the mains cord by the plug. Do
not pull the mains cord.
of time. Examples include screen menus,
teletext pages, black bars or stock market
tickers. If you must use stationary images,
reduce the screen contrast and brightness
to avoid screen damage.
1.3 Environmental care
Recycling your packaging
The packaging of this product is intended to
be recycled. Contact your local authorities for
information on how to recycle the packaging.
• Permanent hearing loss can occur if you use
earphones or headphones at high volumes.
Though high volume may sound normal
over time, it can damage your hearing. To
protect your hearing, limit the amount of
time you use earphones or headphones at
high volume.
Disposing your used product
Your product is manufactured with high-quality
materials and components that can be recycled
and reused. When you see the crossed-out
wheel bin symbol attached to a product, it
means the product is covered by the European
Directive 2002/96/EC:
1.2 Screen care
• Turn off and unplug the mains cord before
cleaning the screen. Clean the screen with a
soft, dry cloth. Do not use substances such
as household cleaning agents as these may
damage the screen.
Do not dispose your used product with
household waste. Ask your dealer for
information on how to safely dispose of the
product. Uncontrolled waste disposal harms
both the environment and human health.
Disposing used batteries
The supplied batteries do not contain
mercury or cadmium. Dispose supplied and all
other used batteries according to your local
regulations.
• To avoid deformations or colour fading,
wipe off water droplets as soon as possible.
• Do not touch, push, rub or strike the
screen with hard objects as this may
damage the screen permanently.
• Where possible, avoid stationary images
that remain on-screen for extended periods
EN-4
Power consumption
The TV consumes minimal energy in standby
mode to minimise environmental impact. Active
power consumption is displayed at the back of
the TV.
For more product specifications, see the
product leaflet at www.philips.com/support.
Your TV
Side connectors
ENglish
2
This section gives you an overview of
commonly-used TV controls and functions.
2.1 TV overview
Side controls and indicators
VOLUME
4
3
MENU
PROGRAM
2
Use the TV side connectors to connect to
mobile devices such as a camera or highdefinition game console. You can also connect
a pair of headphones or a USB memory device.
Back connectors
1
POWER
5
1. POWER
2. PROGRAM +/3. MENU
4. VOLUME +/5. Power indicator/Remote control sensor
Use the TV back connectors to connect to the
antenna and permanent devices such as a highdefinition disc player, DVD player or VCR.
DDNote
For more information about connections,
see Section 7 Connect devices.
EN-5
1. STANDBY
Remote control
2. SOURCE
1
2
3
SOURCE
TELETEXT
SUBTITLE
DEMO
4
GUIDE
5
OK
OPTION
EXIT
6
MENU
BROWSE
P
7
8
EN-6
1
2
3
4
5
6
7
8
9
MHEG
CANCEL
0
4. COLOUR KEYS
From left: Red, green, yellow, blue
5. NAVIGATION KEYS
Up Î, Down ï, Left Í, Right Æ, OK
6. MENU
7. PROGRAM +/8. VOLUME +/-
INFO
BACK
3. TELETEXT
For advanced information about the remote
control, see Section 5.1 Remote control overview.
Get started
This section helps you position and install the
TV and supplements the information provided
in the Quick Start Guide.
DDNote
Refer to the Quick Start Guide for stand
mounting instructions.
3.1 Position the TV
In addition to reading and understanding the
safety instructions in Section 1.1, consider the
following before positioning your TV:
• The ideal viewing distance for watching TV
is three times its screen size.
• Position the TV where light does not fall on
the screen.
3.2 Wall mount the TV
BBWARNING
Wall mounting of the TV should only
be performed by qualified installers.
Koninklijke Philips Electronics N.V. bears no
responsibility for improper mounting that
results in accident or injury.
Step 1 Purchase a VESA-compatible wall
bracket
Depending on the size of your TV screen,
purchase one of the following wall brackets:
TV
screen
size
(inches/
cm)
VESAcompatible
wall bracket
type
(millimeters)
Special
instructions
32”/81cm
Adjustable
300 x 300
The VESAcompatible
bracket must
be adjusted
to 200 x
300 before
securing to
the TV
37”/94cm
Fixed 300 x 300
None
42”/107cm Fixed 400 x 400
or larger
None
• Connect your devices before you position
your TV.
• Your TV is equipped with a Kensington
Security Slot at the back of the TV.
If connecting an anti-theft Kensington lock
(not supplied), position the TV within reach
of a permanent object (such as a table) that
can be easily attached to the lock.
EN-7
ENglish
3
Step 2 Remove the TV stand
DDNote
These instructions are only applicable to
TV models with mounted stands. If your TV
stand is not mounted, skip to Step 3 Secure
the VESA-compatible wall bracket to the TV.
TV stands may differ in shape on some TV
models.
1. Carefully place the TV face down on a
flat, stable surface that is covered by soft
cloth. The cloth should be thick enough to
protect your screen.
2. Using a cross-head screwdriver (not
supplied), unscrew the four bolts that
secure the stand to the TV.
Step 3 Secure the VESA-compatible wall
bracket to the TV
1. Locate the four mounting nuts at the back
of the TV.
2. Continue with the instructions provided
with your VESA-compatible wall bracket.
DDNOTE
When securing the VESA-compatible wall
bracket to your TV, use M6 bolts for 32 inch
models or M8 bolts for larger models (bolts
not supplied).
3. Firmly pull the stand from the bottom of
the TV. Place both the stand and bolts in a
secure location for future reinstallation.
EN-8
ENglish
3.3 Connect the antenna cable
1. Locate the TV ANTENNA connector at
the back of the TV.
2. Connect one end of an antenna cable
(not supplied) to the TV ANTENNA
connector. Use an adaptor if the antenna
cable does not fit.
3. Connect the other end of the antenna
cable to your antenna outlet, ensuring that
the cable is tightly secured at both ends.
3.4 Connect the mains cord
UK - EIRE
1. Locate the AC IN mains connector at the
back or on the bottom of the TV.
2. Connect the mains cord to the AC IN
mains connector.
3. Connect the mains cord to the mains,
ensuring that the cord is tightly secured at
both ends.
BBWARNING
Verify that your mains voltage corresponds
with the voltage printed at the back of the
TV. Do not insert the mains cord if the
voltage is different.
To connect the mains cord
DDNote
The location of the mains connector varies
according to TV model.
EN-9
3.5 Insert the remote control
batteries
3.7 First time setup
The first time the TV is switched on, a
language selection menu appears.
Menu language
Please select your
language...
English
Español
Français
Hrvatski
1. Slide the battery cover off the back of the
remote control.
2. Insert the two supplied batteries (Size AAA,
Type LR03). Be sure the + and - ends of the
batteries line up with the markings inside
the case.
3. Slide the cover back into position.
DDNote
Remove the batteries if not using the
remote control for an extended period of
time.
3.6 Switch on the TV
The first time you switch on the TV, check that
the mains cord is properly connected. When
ready, turn on the mains (if mains switch is
available), then press POWER on the side of
the TV.
DDNote
Certain TV models require you to press
and hold POWER for up to two seconds.
A beep sound indicates that your TV is
switched on.Your TV may take up to 15
seconds to start.
EN-10
using cursor up and
down
Italiano
Magyar
...
Next
Select your language and follow the
on-screen instructions to setup the TV.
DDNote
If DVB-C is available, you will be prompted
to select Antenna or Cable. Antenna
installs DVB-T channels. Cable installs
DVB-C channels.
CCCAUTION
Do not change DVB-C Settings unless
required.
EETip
You can reinstall channels as described in
Section 6 Install channels
Use your TV
4.1.3 Switch your TV to standby
ENglish
4
This section helps you perform basic TV
operations. Instructions on advanced TV operations are provided in Section 5 Use more of your
TV.
4.1 Switch your TV on/off or to
standby
4.1.1 Switch on your TV
MENU
PROGRAM
POWER
1
• If the power indicator (1) is off, press
POWER on the side of the TV.
• Press . STANDBY on the remote
control. The power indicator switches to
standby (red).
EETip
Though your TV consumes very little power
when in standby, energy continues to be
consumed as long as the mains remain
connected and powered. When not in use
for extended periods of time, switch off and
disconnect the TV from the mains.
4.1.4 Switch on the TV from standby
4.1.2 Switch off your TV
MENU
PROGRAM
• If the power indicator is in standby (red),
press . STANDBY on the remote
control.
POWER
1
• Press POWER on the side of the TV. The
power indicator (1) switches off.
DDNote
If you cannot locate your remote control
and you want to switch on the TV from
standby, press POWER on the side of
the TV. This switches off your TV. Press
POWER again to switch the TV back on.
EN-11
4.2 Watch TV
4.2.3 Adjust volume
4.2.1 Switch channels
• Press
VOLUME + or - on the remote
control.
• Press VOLUME + or - on the side
controls of your TV.
• Press a number (1 to 999) or press P +/on your remote control.
• Press PROGRAM +/- on the side controls
of the TV.
• Press
on the remote control to return
to the previously-viewed TV channel.
4.2.2 Switch channels (digital receiver)
• Press
on the remote control to mute
the sound. Press
again to un-mute the
sound.
DDNote
If headphones are connected, adjust
headphone volume as described in Section
5.3.5 Adjust sound settings.You must press the
MUTE button on the remote control to
mute audio from the TV speakers. Pressing
VOLUME +/- buttons turns on the TV
speakers again.
4.3 Access DVB-C and DVB-T
channel networks
1. Switch on the digital receiver.
2. Press SOURCE on the remote control
then select the input your digital receiver is
connected to.
If you have both DVB-C and DVB-T installed,
you can access channels from both networks.
1. Press MENU.
3. Press OK to select the digital receiver.
2. Select TV menu > Installation >
Installation mode.
4. Use the remote control of the digital
receiver to select TV channels.
3. Select Cable (to access DVB-C channels)
or Antenna (to access DVB-T channels).
4. Switch between DVB-C or DVB-T channels
as described in Section 4.2.1 Switch channels.
DDNote
For instructions on how to install DVB-C
and DVB-T channels, see Section 6.1
Automatically install channels.
EN-12
ENglish
4.4 Use teletext
Most TV channels broadcast information via
teletext.
1. Press TELETEXT on the remote control.
The main index page appears.
2. To select a page with the remote control:
• Enter the page number with the number
keys.
• Press P +/- or Î/ï to view the
next or the previous page.
• Press a colour key to select one of the
colour coded items at the bottom of the
screen.
Tip
Press
to return to the previously
viewed page.
3. Press TELETEXT again to switch off
teletext.
Note (for UK users only)
Some digital TV channels offer dedicated
digital text services (for example,
BBC1).
For advanced information on teletext, see
Section 5.5 Use advanced teletext features.
EN-13
5
Use more of your TV
This section helps you perform advanced TV
operations, including how to:
5.1 Remote control overview
This section provides a detailed overview of
remote control features.
• Use the TV menus (Section 5.2)
• Adjust picture and sound settings (Section
5.3)
• Change to Shop or Home mode (Section
5.4)
• Use advanced teletext features (Section 5.5)
• Create favourite lists (Section 5.6)
1
21
20
19
18
2
SOURCE
TELETEXT
3
4
5
SUBTITLE
DEMO
GUIDE
INFO
• Use the Electronic Programme Guide
(Section 5.7)
• Use timers and Child lock (Section 5.8)
17
• Use subtitles (Section 5.9)
• View photos and listen to music (Section
5.10)
• Listen to digital radio channels (Section
5.11)
• Update your TV software (Section 5.12)
16
OPTION
EXIT
MENU
BROWSE
15
14
13
EN-14
7
OK
BACK
6
8
9
P
10
11
1
2
3
4
5
6
7
8
9
MHEG
CANCEL
0
12
2. SOURCE
Selects connected devices.
3. PICTURE FORMAT
Selects a picture format.
4. SUBTITLE
Activates or deactivates subtitles.
19. DEMO
Toggles the Demo menu on or off.
ENglish
1. STANDBY
Switches the TV on from standby or back
to standby.
20. TELETEXT
Toggles teletext on or off.
21. DUAL SCREEN
Splits the current channel or source on the
left of the screen. Teletext appears on the
right.
5. COLOUR KEYS
Selects tasks or teletext pages.
6. INFO
Displays programme information, if available.
7. OK
Accesses the All channels menu or
activates a setting.
8. NAVIGATION KEYS
Up Î, Down ï, Left Í and Right Æ keys
navigate the menu.
9. OPTION
Activates the Quick access menu.
10. PROGRAM (P) +/Switches to the next or previous channel.
11. NUMBER KEYS
Selects a channel, page or setting.
12. PREVIOUS CHANNEL
Returns to the previously-viewed channel.
13. MHEG CANCEL
Cancels digital text or interactive services
(UK only).
14. MUTE
Mutes or restores sound.
15. VOLUME +/Increases or decreases volume.
16. MENU
Toggles the menu on or off.
17. BACK
18. GUIDE
Toggles the Electronic Programme Guide
on or off. Only active with digital channels.
EN-15
5.2 Use TV menus
5.2.2 Use the main menu
On-screen menus help you install your TV,
adjust picture and sound settings and access
other features. This section describes how to
navigate the menus.
The following example describes how to use
the main menu.
5.2.1 Access the main menu
1. Press MENU on the remote control to
display the main menu.
Television
1. Press MENU on the remote control to
display the main menu.
Television
TV menu
Channel list
Programme guide
Multimedia
2. Press MENU to exit.
TV menu
Channel list
Programme guide
Multimedia
2. Press Æ to enter the TV menu.
TV menu
TV settings
TV settings
Features
Installation
Settings assistant
Reset smart settings
Software update
The main menu offers the following items:
• TV menu
Select this menu for installation, picture,
sound settings and other feature settings.
• Channel list
Select this item to display the Channel list.
Create your Favourite channel lists here.
• Programme guide
Available when digital channels are installed,
this item displays information about the
digital programmes. See Section 5.7 Use the
Electronic Programme Guide.
• Multimedia
Select this item to view photos or play
music stored on a USB device.
See Section 5.10 View photos and listen to
music.
EN-16
Picture
Sound
3. Press Æ to enter the TV settings menu.
TV settings
Settings assistant
Settings assistant
Reset smart settings Start now
Picture
Sound
TV settings
Picture
Settings assistant
Contrast
Reset smart settings Brightness
Colour
Picture
Hue
Sound
Sharpness
Tint
5. Press Æ to enter the Picture settings.
Picture
Contrast
Brightness
Colour
Hue
Sharpness
Tint
Contrast
90
47
52
0
6. Press ï to select Brightness.
Contrast
Brightness
Colour
Hue
Sharpness
Tint
5.2.3 Use the Quick access menu
The Quick access menu gives direct access to
some often-needed menu items.
DDNote
When digital channels are installed and
broadcasted, the relevant digital options are
displayed in the Quick access menu.
1. Press OPTION on the remote control.
4
Picture
DDNote
More choices are available when digital
channels are installed and broadcast.
Brightness
98
47
52
0
4
2. Press Î or ï to select an option:
• Audio language (digital)
See Section 5.3.5 Adjust sound settings.
• Subtitle language (digital)
See Section 5.9.3 Select a subtitle
language on digital TV channels.
• Subtitle
See Section 5.9 Use subtitles.
• Picture format
See Section 5.3.4 Change picture format.
• Equalizer
See Section 5.3.5 Adjust sound
settings.
• Clock
3. Press OK to display the selected option
menu.
7. Press Æ to enter the Brightness setting.
Brightness
8. Press Î or ï to adjust the setting.
9. Press Í to return to the Picture settings
or press MENU to exit.
4. Press Î, ï, Í, Æ to adjust the settings in
the menu.
5. Press OPTION to exit the menu.
To display or hide the clock
1. In the Quick access menu, select
Clock and press OK to display the clock
permanently.
EN-17
ENglish
4. Press ï to select Picture.
Quick access
Audio language
Subtitle language
Subtitle
Picture format
Equalizer
Clock
5.3.2 Adjust picture settings
This section describes how to adjust picture
settings.
1. Press MENU on the remote control
and select TV menu > TV settings >
Picture.
TV settings
2. Press OPTION and press Î or ï to
select Clock again.
3. Press OK to hide the clock.
5.3 Adjust picture and sound
settings
This section describes how to adjust picture
and sound settings.
5.3.1 Use Settings assistant
Use Settings assistant to guide you through
picture and sound settings.
1. Press MENU on the remote control
and select TV menu > TV settings >
Settings assistant.
2. Press Æ to enter.
3. Press OK to Start now.
4. Press the green key on the remote control
to start the assistant.
5. Press Í or Æ to select the left or right side
to make your choice.
6. Press the green key to go to the next
setting. You will go through several settings.
When finished you will be prompted to
store these settings.
7. Press the green key to store all your
settings.
Picture
Settings assistant
Contrast
Reset smart settings Brightness
Colour
Picture
Hue
Sound
Sharpness
Tint
Dynamic contrast
Noise reduction
Colour enhancement
Active Control
Light sensor
Picture format
2. Press Æ to enter the list.
3. Press Î or ï to select a setting:
• Contrast
Changes the level of bright parts in the
picture keeping the dark parts unchanged.
• Brightness
Changes the level of light in the picture.
• Colour
Changes the level of saturation.
• Hue
If NTSC is broadcast, this level
compensates the colour variations.
• Sharpness
Changes the level of sharpness of fine
details.
• Tint
Sets the colours to Normal, Warm
(reddish) or Cool (bluish). Select Custom
to make a setting of your own.
• Custom tint
If Custom is selected in the Tint menu,
EN-18
• Dynamic contrast
Enhances the contrast in the picture as the
image on the screen changes.
Set the level to Minimum, Medium,
Maximum or Off. Medium is
recommended.
• Noise reduction
Filters and reduces the noise in the picture.
Set the level to Minimum, Medium,
Maximum or Off.
• Colour enhancement
Makes colours more vivid and improves the
resolution of details in bright colours.
Set the level to Minimum, Medium,
Maximum or Off.
• Active Control
Corrects all incoming signals to provide
the best picture possible. Switches Active
control On or Off.
• Light sensor
Adjusts picture settings to match lighting
conditions in the room. Switches Light
sensor On or Off.
5.3.3 Use smart settings
Apart from manually adjusting picture settings,
you can use smart settings to set your TV to a
predefined picture and sound setting.
1. Press MENU on the remote control and
select TV menu > TV settings > Reset
smart settings.
2. Press Æ to enter the list.
3. Press Î or ï to select one of the following
settings:
• Current
Applies manually selected picture and
sound settings.
• Standard
Applies natural picture and sound
settings suitable for most living room
conditions.
• Vivid
Applies brilliant picture and sound
settings suitable for bright surroundings.
• Movie
Applies dynamic picture and sound
settings suitable for a complete
cinematic experience.
4. Press the green key to store your selection.
DDNote
Not available on all TV models.
• Picture format
See Section 5.3.4 Change picture format.
EN-19
ENglish
follow the on-screen instructions to
change the value of:
- R-WP (Red White Point)
- G-WP (Green White Point)
- B-WP (Blue White Point)
- R-BL (Red Black Level)
- G-BL (Green Black Level)
5.3.4 Change picture format
Change the picture format to suit your content.
1. Press
PICTURE FORMAT on your
remote control. Alternatively, press MENU
and select TV menu > TV settings >
Picture > Picture format.
DDNote
Constant use of the 4:3 picture format can
cause screen distortion. We recommend
you use Auto format.
• Movie expand 14:9 (Not for HD)
Scales the classic 4:3 format to 14:9.
2. Press Î or ï to select one of the following
picture formats:
• Auto format (Not for PC)
DDNote
Constant use of the 14:9 picture format
can cause screen distortion. We recommend
you use Auto format.
• Movie expand 16:9 (Not for HD)
Enlarges the picture automatically to fill the
screen. Subtitles remain visible.
DDNote
We recommend you use Auto format for
minimal screen distortion.
Scales the classic 4:3 format to 16:9.
• Wide screen
• Super zoom (Not for HD)
Stretches the classic 4:3 format to 16:9
• Unscaled (Only for HD and PC)
Removes the black bars on the side of 4:3
broadcasts with minimal distortion.
• 4:3 (Not for HD)
Maximum sharpness though distortion may
appear on borders. Also, black bars may
appear with pictures from your PC.
Displays the classic 4:3 format.
EN-20
This section describes how to adjust sound
settings.
1. Press MENU on the remote control and
select TV menu > TV settings > Sound.
2. Press Æ to enter the list.
TV settings
Sound
Settings assistant
Equalizer
Reset smart settings Volume
Balance
Picture
Audio language
Sound
Dual I/II
Mono/Stereo
Surround mode
Headphone volume
Auto volume leveling
Delta volume
Auto surround
3. Press Î or ï to select one of the following
settings:
• Equalizer
Changes the bass and treble of the sound.
Select each bar to change a setting.
Alternatively, press the colour keys to
select a pre-defined equalizer setting:
• Standard
Equalizer set to neutral.
• Speech
Equalizer settings maximized for speechbased audio.
• Multimedia
Settings maximized for different audio
types.
• Music
Settings maximized for music.
• Volume
Changes the volume.
EETip
To enable or disable the
volume bar that
appears when you change the volume, press
MENU on the remote control and select
TV menu > Installation > Preferences.
Press Æ to enter the list and select Volume
bar on or Volume bar off.
• Balance
Sets the balance of the left and right
speakers to best fit your listening position.
• Audio language
Lists audio languages available for a digital
channel (unavailable on analogue channels).
• Dual I/II
If available, choose between two different
languages.
• Mono/Stereo
If stereo broadcasting is available, choose
between mono or stereo.
• Surround mode
If surround sound is available, enable it for
more spatial sound.
• Headphone volume
Changes the volume of your headphones.
DDNote
When headphones are connected, press the
MUTE button on the remote control to
mute audio from the TV speakers. Pressing
VOLUME +/- buttons un-mutes the TV
speakers.
• Automatic volume leveling
Reduces sudden volume changes, for
example, during commercials or when
switching from one channel to another.
Select On or Off.
• Delta volume
Levels out volume differences between
channels or connected devices. You must
switch to the connected device before
changing the Delta volume.
• Auto surround
Automatically switches the TV to the best
surround sound mode available from a
broadcast. Select On or Off.
EN-21
ENglish
5.3.5 Adjust sound settings
5.4 Change to Shop or Home
mode
2. Press INFO.
1. Press MENU on the remote control
and select TV menu > Installation >
Preferences > Location.
2. Press Æ to enter the Location menu.
3. Use Î or ï to select the TV mode:
The T.O.P. overview appears.
• Shop
Sets smart settings to Vivid, ideal for
a shop environment. The flexibility to
change settings is limited.
3. Use Í, Æ or Î, ï to select a subject.
• Home
Gives home users the full flexibility to
change all TV settings.
5.5.3 Use dual screen teletext
4. Press OK to confirm.
5. Press MENU to exit.
5.5 Use advanced teletext
features
4. Press OK to view the page.
Enabling dual screen teletext displays your
channel or source on the left of the screen.
Teletext is displayed on the right.
1. Press
DUAL SCREEN on your
remote control to enable dual screen
teletext.
2. Press
again to display normal teletext .
Your TV has a 1,200 page memory that stores
broadcasted teletext pages and subpages. The
teletext memory reduces page loading time.
3. Press TELETEXT to switch off teletext.
5.5.1 Select teletext subpages
Quickly jump to a subject linked to a series of
page numbers or search for specific words in
teletext pages.
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1. Press TELETEXT on the remote control.
2. Select a teletext page.
5.5.4 Search teletext
1. Press TELETEXT on the remote control.
2. Press OK to highlight the first word or
number.
3. Press Í or Æ to select a subpage.
3. Press Î, ï or Í, Æ to jump to the next
word or number on the page.
5.5.2 Select T.O.P. teletext broadcasts
4. Press OK to search a page which holds the
highlighted word or number.
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to another
without using page numbers. T.O.P. teletext is
not broadcast on all TV channels.
1. Press TELETEXT on the remote control.
EN-22
5. Press Î until no word or number is
highlighted to exit Search.
For more comfortable reading, you can enlarge
the teletext page.
1. Press TELETEXT on the remote control
and select a teletext page.
2. Press OPTION on the remote control to
enlarge the top part of the page.
• Cycle subpages
If subpages are available for the selected
page, you can cycle subpages automatically.
• Language
Some languages use a different set of
characters. If using a different language,
switch to the appropriate language group to
display the text correctly.
4. Press OK to change an option:
5. Press MENU to exit Teletext menu.
6. Press TELETEXT to switch off teletext.
5.5.7 Use digital text services (UK only)
4. Press Î or ï to scroll through the
enlarged page.
Some digital TV broadcasters in UK offer
dedicated digital text or interactive services
(for example, BBC1). These services work like
normal teletext with the addition of number,
colour and navigation keys.
5. Press OPTION again to return to the
normal page size.
1. Press TELETEXT on the remote control.
3. Press OPTION again to view the enlarged
lower part of the page.
5.5.6 Use the teletext menu
With the options in the teletext menu you
can reveal hidden information, cycle subpages
automatically and change the character setting.
1. Press TELETEXT on the remote control.
2. Press MENU. The Teletext menu
appears.
Teletext menu
Reveal
Off
Cycle subpages
Language
Off
Gr. II
3. Press Î or ï to select an option.
• Reveal
Hide or reveal hidden information on a
page, such as solutions to riddles or puzzles.
2. Press Î, ï or Í, Æ to select or highlight
items.
3. Press one of the colour keys to select an
option.
4. Press OK to confirm or activate.
5. Press MHEG Cancel to cancel digital text
or interactive services.
CCCaution
Digital text services are blocked when
subtitles are broadcasted and Subtitle On
is set in the Features menu as described in
Section 5.9 Subtitles.
5.5.8 Use Teletext 2.5
If broadcasted by the TV channel, Teletext 2.5
offers more colours and better graphics than
normal teletext. Teletext 2.5 is switched on by
default.
EN-23
ENglish
5.5.5 Enlarge teletext pages
1. Press MENU on the remote control
and select TV menu > Installation >
Preferences > Teletext 2.5.
2. Press Æ to enter the list.
3. Select On or Off.
4. Press OK to change the option.
5.6.2 Setup a favorite list
1. Press OK on the remote control. The last
selected list appears.
2. Press the red key to show all favourite lists.
3. Press Î or ï to select a list.
4. Press OK.
5.6 Create favorite lists
5. Press the green key to enter Edit mode.
The selected list displays a full channel list.
Use the All channels list or setup a favourite
list of your own with preferred TV channels
and radio stations. Each member of your family
can create his or her own favourite list.
6. Press Î or ï to highlight a channel.
5.6.1 Select a favorite list
8. Press the green key again to exit Edit
mode. The modified channel list appears
again.
1. Press OK on the remote control.
Alternatively, press MENU and select
Channel list.
If this is new installation, the All channels
list is displayed.
All channels
....
EXT 3
HDMI ...
A
1 Analogue channel 1
2 Digital channel 1
3 Digital channel 2
4 Radio channel 1
7. Press OK to mark (or unmark) the
highlighted channel. The channel is added to
(or removed from) the selected list.
5.6.3 Select a channel from a favorite
list
1. Press OK on the remote control. The last
selected channel list appears.
2. Use Î or ï to highlight a channel.
3. Press OK. The TV tunes to that channel.
EETip
....
Select list
If this is not a new installation, the last
selected favourite list appears.
2. Press the red key to display all favourite
lists.
3. Press Î or ï to select a list.
4. Press OK. The selected favourite list
appears.
5. Press OK again to exit.
EN-24
•
•
Press PROGRAM (P) +/- on the
remote control to scan channels in your
selected list.
You can select channels not in your
list by pressing the number keys.
EPG is an on-screen guide that displays
scheduled digital TV programmes. This guide is
not available with analogue channels. You can
navigate, select and view programmes by time,
title or genre.
There are two types of EPG, ‘Now and Next’
and ‘7 or 8 day’ EPG. ‘Now and Next’ is
always available but the ‘7 or 8 day’ EPG is
only available in certain countries.
With the EPG menu you can:
• View a list of currently broadcast digital
programmes
• View upcoming programmes
• Group programmes by genre
• Set reminders when programmes start
• Setup preferred EPG channels
26 BBC1
Tue., 12 Sep
Title : Commonwealth Games
Info: 7:50 - 12:30 : 280 min
..........
Exit
Next
Press -P+ to change channel.
Or
‘7 or 8 day’ EPG
It may take some time to receive ‘7 or 8
day’ EPG data. When loaded, a list of TV
programmes is displayed.
Programme guide
DDNote
The first time you use EPG, you may be
prompted to perform an update. If so,
follow the on-screen instructions.
1. Press
GUIDE on the remote control.
Alternatively, press MENU and select
Programme guide.
Tue., 12 Sep
Around
09:55
Next
BBC ONE
07:50 Commonwealth
12:30 Commonwealth
BBC TWO
09:50 Tweenies
10:15 Something Special
five
09:00 The Wright Stuff
10:30 Trisha Goddard
BBC THREE 05:32 This is BBC THREE
BBC FOUR
05:32 This is BBC FOUR
abc1
09:20 Moonlighting
Remind
5.7.1 Switch on EPG
09:17
ENglish
5.7 Use the Electronic
Programme Guide
13:50 Anastasia
Watch
12:00 This is BBC THREE
12:00 This is BBC FOUR
10:15 Daddio
Jump to ...
Info
0010 - EEN
2. Use the colour keys on the remote control
to activate available actions:
• Next
Displays information about the next
programme.
• Remind
Marks a programme as a reminder.
• Watch
Watch or listen to a current
programme.
• Jump to...
Jumps to the next or previous day.
• Info
If available, displays information about a
selected programme.
3. Press
GUIDE to exit the EPG.
The following EPG types appear:
‘Now and Next’ EPG
Detailed information about the current
programme is displayed:
5.7.2 More on ‘7 or 8 day’ EPG
Searching by genre, scheduling reminders
and more features are available through the
Programme guide menu.
EN-25
1. Press
GUIDE on the remote control.
2. Press MENU on the remote control.
The Programme guide menu appears.
Programme guide
What's on
What's on
12:30 South Today
Search by genre
11:50 Working Lunch
Scheduled remind... 11:55 Melrose Place
Preferred EPG ch... 13:00 In aller Freund
Acquire EPG data
DDNote
You can always switch off your TV earlier or
reset Sleeptimer during the countdown.
5.8.2 Automatically switch the TV on
(On timer)
On timer switches the TV to a specified
channel at a specified time, from standby.
3. Press Î or ï to select a menu option.
1. Press MENU on the remote control
and select TV menu > Features > On
timer.
4. Press Æ to enter.
2. Press Æ to enter the On timer menu.
5. Press Î or ï to make a selection.
3. Use Î or ï, Í or Æ to select and enter
the menu items to set a channel, day of the
week, frequency and starting time.
6. Press OK or the green key to activate the
selection.
7. Press
GUIDE to exit the EPG.
4. Press OK to confirm.
5. Press MENU to exit.
DDNote
Only channels marked as preferred EPG
channels appear in the Programme guide
menu.
EETip
To switch off On timer, select Off in the
On timer menu.
5.8 Use timers and Child lock
5.8.3 Lock TV channels or connected
devices (Child lock)
This section describes how to switch the TV on
or off at a specified time and to use Child lock.
5.8.1 Automatically switch the TV to
standby (Sleeptimer)
Sleeptimer switches the TV to standby after a
defined period of time.
1. Press MENU on the remote control
and select TV menu > Features >
Sleeptimer.
2. Press Æ to enter the Sleeptimer bar.
3. Press Î or ï to set the sleep time. This
can be up to 180 minutes in steps of
five minutes. If set to zero minutes, the
Sleeptimer is switched off.
4. Press OK to activate the Sleeptimer.
EN-26
Lock TV channels or connected devices with
a four digit code to prevent children from
watching unauthorised content.
To set or change the Child lock code
1. Press MENU on the remote control and
select TV menu > Features > Set code
or Change code.
2. Press Æ to enter the code setup.
3. Enter your code with the number keys.
The Features menu reappears with a
message confirming that your code is
created or changed.
EETip
If you forget your code, enter ‘8888’ to
override any existing codes.
1. Press MENU on the remote control and
select TV menu > Features > Child
lock and press Æ to enter your code.
2. Enter your code with the number keys.
To lock or unlock all channels and
connected devices
3. Press Î or ï to select Channel lock.
4. Press Æ.
5. Press Î or ï to select the channel or
device you want to lock or unlock.
6. At each selection, press OK to lock or
unlock the channel or device.
To set parental ratings
2. Press OK.
Some digital broadcasters rate their
programmes according to age. You can set your
TV to display only programmes with age ratings
higher than your child’s.
To lock a programme or all channels
from a certain time
1. In the Child lock menu, select Custom
lock.
1. In the Child Lock menu, select Lock or
Unlock.
1. In the Child lock menu, select Custom
lock.
2. Press Æ to enter.
3. Press Î or ï to select Parental rating.
Child lock
Custom lock
4. Press Æ.
Lock
Custom lock
Unlock
Lock after
Channel lock
5. Press Î or ï to select an age rating.
Parental rating
6. Press Menu to exit the Child lock menu.
2. Press Æ to enter the Custom lock menu.
5.9 Use subtitles
3. Press Æ again to enter the Lock after
menu.
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-T
digital broadcasts. With digital broadcasts,
you have the additional option of selecting a
preferred subtitle language.
4. Select On to enable the Timer lock.
5. Press Í.
6. Select Time.
7. Press Æ.
8. Enter the time with Î or ï and Æ.
9. Press OK.
To lock one or more channels and
connected devices
1. In the Child lock menu, select Custom
lock.
2. Press Æ to enter.
5.9.1 Enable subtitles on analogue TV
channels
1. Select an analogue TV channel.
2. Press TELETEXT on the remote control.
3. Enter the three digit page number of the
subtitle page.
4. Press TELETEXT to switch off teletext.
5. Press MENU on the remote control and
select TV menu > Features > Subtitle.
6. Press Æ to enter the list.
EN-27
ENglish
To enter the Child lock menu
TV menu
Features
TV settings
Features
Subtitle
Subtitle language
Installation
Sleeptimer
Child lock
Software update
Set/Change code
On timer
Common interface
Demo
7. Press Î or ï to select On to display
subtitles always or On during mute to
display subtitles only when the sound is
muted with the
key on the remote
control.
8. Press OK to return to the Features menu.
DDNote
You must repeat this procedure to enable
subtitles on each analogue channel.
5.9.2 Enable subtitles on digital TV
channels
Repeat steps 5 to 8 in Section 5.9.1 Enable
subtitles on analogue TV channels.
5.9.3 Select a subtitle language on
digital TV channels
DDNote
When you select a subtitle language on
a digital TV channel as described below,
the preferred subtitle language set in the
Installation menu is temporarily overruled.
1. Press MENU on the remote control and
select TV menu > Features > Subtitle
language.
2. Press Æ to enter the list of available
languages.
3. Press Î or ï to select a subtitle language.
4. Press OK.
EN-28
5.10 View photos and listen to
music
Connect an external USB storage device and
view pictures (JPEG format only) or listen to
music (MP3 or Linear PCM formats only).
DDNote
Philips will not be held responsible if your
USB storage device is not supported nor
shall Philips accept any liability for damage
or loss of stored data.
5.10.1 Connect a USB storage device
While your TV is on, connect your USB storage
device to the USB port on the side of your TV.
The main menu appears automatically and the
name of the USB device is highlighted next to
Multimedia.
Television
TV menu
Channel list
Programme guide
Multimedia
DDNote
See Section 7.1 Connection overview for a
description of the side connectors, including
the USB port.
5.10.2 Disconnect a USB storage device
CCCaution
To avoid damaging your USB device, always
follow the procedure described below when
disconnecting.
1. Press MENU on the remote control to
exit the Multimedia menu.
2. Wait five seconds before disconnecting the
USB device.
Slide show settings
1. After connecting your USB storage
device to the TV, press Æ to enter the
Multimedia menu. Picture is highlighted.
• No details / More details
Displays the picture name, date, size and
next picture in the slide show.
USB
Picture
Picture
Afrika_2001
Music
Paris_2006
My_car.jpg
Jean.jpg
Mary.jpg
2. Press Æ to enter the Picture folder.
3. Press Î or ï to select a picture or a
picture album on the USB device.
Picture
Afrika_2001
Afrika_2001
Paris_2005
My_car.jpg
Jean.jpg
Kenya.jpg
Congo.jpg
Victoria.jpg
Dakar.jpg
Mary.jpg
Cairo.jpg
Afrika_2001
Kenya.jpg
Congo.jpg
Victoria.jpg
Dakar.jpg
Afrika_2001
Kenya.jpg
Cairo.jpg
4. Press OK to view the picture or to start a
slide show of the pictures in the album.
• Press OK to pause the slide show. Press
OK again to restart.
• Press one of the colour keys on
the remote control to perform the
corresponding function shown at the
bottom of the screen.
• Press the blue key to stop the show and
to see more functions. If the function
bar at the bottom disappears, press any
colour key to make it reappear.
5. Press Í and select another picture or
another album.
• Transitions
Displays the list of available transition styles
of the pictures. Press Î or ï to select and
press OK to activate.
• Slide time
Sets the time lag for picture transitions:
Short, Medium or Long.
• Rotate
Rotates a picture.
• Zoom
Displays a list of available zoom
magnifications.
• Start show/Stop show
Starts or stops a slide show.
5.10.4 View pictures as thumbnails
Thumbnails allow you to view picture albums in
an overview format.
1. Select a picture album.
2. Press Æ to enter the picture list.
3. Press the green key.
4. Press Î or ï, Í or Æ to highlight a picture.
5. Press OK to view the picture.
6. Press Í to return to the thumbnail
overview.
7. Press the green key again to go back to the
picture list.
5.10.5 Listen to music
1. After connecting your USB storage
device to the TV, press Æ to enter the
Multimedia menu.
2. Select Music then press Æ to enter the
EN-29
ENglish
5.10.3 View your photos
Music folder.
3. Press Î or ï to select a song or a music
album.
you update the TV software when updates are
available. Check www.philips.com/support for
availability.
4. Press OK to play the selected song or
album.
5.12.1 Check your current software
version
Music settings
• Press MENU on the remote control and
select TV menu > Software update >
Current software info.
• No details/More details
Displays the file name.
• Repeat one/all
Repeat a song or an album.
• Shuffle
Play songs in a random sequence.
5.10.6 View a slide show with music
You can view a slide show of your stored
pictures with background music.
1. Select an album of songs first then press
OK.
2. Select an album to display then press OK.
5.11 Listen to digital radio
channels
If digital broadcasting is available, digital radio
channels are installed automatically during
installation. To reorder the digital radio
channels, see Section 6.5 Rearrange the channels.
1. Press OK on the remote control. The All
channels menu is displayed.
2. Use the number keys to select a radio
channel.
3. Press OK.
5.12 Update your TV software
Philips continuously tries to improve its
products and we strongly recommend that
EN-30
5.12.2 Check if software updates are
available
Philips periodically transmits messages via
digital broadcast, announcing when software
updates are available:
• Press MENU on the remote control and
select TV menu > Software update >
Announcement.
5.12.3 Update software (digital
broadcasts)
If using (DVB-T) digital broadcasts, your TV
automatically receives software updates. If you
receive a message on-screen prompting you to
update your software:
• Select Now (recommended) to update the
software immediately.
• Select Later to be reminded to update the
software later.
• Select Cancel to exit the update (not
recommended). If you cancel the update,
manually update the software by pressing
MENU and selecting TV menu >
Software update > Local updates.
Follow the on-screen instructions.
ENglish
5.12.4 Update software (analogue
broadcasts)
DDNote
Before performing this procedure be sure
to:
• Set aside some time to complete the entire
update.
• Have available a USB storage device with at
least 64MB of storage space.
• Have access to a computer with a USB
port and internet access.
1. Press MENU on the remote control and
select TV menu > Software update >
Update assistant.
2. Select Start now.
3. Insert the USB storage device and press the
green key. An ID file is copied to the USB
device.
4. Press the green key to finish.
5. Connect the USB storage device to your
computer.
6. In your computer, browse to the USB
storage device and double-click the
‘Update’ HTML file.
7. Follow the on-screen instructions to
complete the update.
EN-31
6
Install channels
5. Press Í twice to return to the
Installation menu.
The first time you setup your TV, you will
be prompted to select an appropriate menu
language and to perform automatic installation
of all TV and digital radio channels (if available).
Installation
This chapter provides instructions on how
to reinstall channels as well as other useful
channel installation features.
DDNote
Re-installing channels modifies the All
channels list.
6.1 Automatically install
channels
This section describes how to search and store
channels automatically. Instructions are for both
digital and analogue channels.
Languages
Languages
Time zone
Menu language
Channel installation
Secondary audio
Preferences
Primary subtitles
Connections
Secondary subtitles
Factory settings
Primary teletext
Primary audio
Secondary teletext
6. In addition
to menu language, you can
MENU_installation_ENG.EPS
configure the following language settings
via the Languages menu (digital channels
only):
• Primary/Secondary audio
Select primary and secondary audio
languages for digital channels.
Step 1 Select your menu language
• Primary/Secondary subtitles
Select primary and secondary subtitle
languages for digital channels.
DDNote
Skip to Step 2 Select your country if your
language settings are correct.
• Primary/Secondary teletext
Select primary and secondary teletext
languages for digital channels.
1. Press MENU on the remote control
and select TV menu > Installation >
Languages > Menu language.
Languages
Menu language
Menu language
English
Primary audio
Primary subtitles
Español
Français
Hrvatski
Secondary subtitles
Italiano
Secondary audio
Magyar
Primary teletext
Secondary teletext
...
2. Press Æ to enter the Menu languages
MENU_languages_ENG.EPS
menu.
3. Press Î or ï to select your language.
4. Press OK to confirm.
• Hearing impaired
Select On to display subtitles with primary
and secondary audio languages.
Step 2 Select your country
Select the country where you are located. The
TV installs and arranges channels according to
your country.
DDNote
Skip to Step 3 Select Antenna or Cable if your
country settings are correct.
1. In the Installation menu, press ï to select
Channel installation.
2. Press Æ to enter the list. Automatic
installation is highlighted.
3. Press Æ to select Start now.
EN-32
5. Press Î or ï to select your country.
6. Press Next.
Step 3 Select Antenna or Cable
(DVB-C only)
DDNote
This option appears only if your
country supports DVB-C (Digital Video
Broadcasting-Cable). Skip to Step 4 Install
channels if DVB-C is not available in your
country.
1. Press Î or ï to select Antenna or
Cable.
Selecting Antenna installs channels
available via DVB-T (Digital Video
Broadcasting-Terrestrial). Selecting Cable
installs channels available via DVB-C.
2. Press Next.
Step 4 Install channels
Your TV searches and stores all available digital
and analogue TV channels as well as all available
digital radio channels.
CCCAUTION
If you select Cable in Step 3 Select Antenna
or Cable, a Settings menu is available. Leave
settings unchanged unless your DVB-C
provider supplies values for Network
frequency, Network ID or Symbol rate.
Note that setting Frequency scan to Full
can extend installation time significantly.
If you have access to DVB-T and DVB-C,
and want to view channels from both
networks, you must perform channel
installation twice — once for DVB-T and
once for DVB-C. After installation, switch
between channels as described in Section 4.3
Access DVB-C and DVB-T channel networks.
EETip
When digital TV channels are found, the
list of installed channels may display empty
channel numbers. If you want to rename,
reorder or uninstall stored channels, see
Section 6.5 Rearrange channels.
6.2 Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
DDNote
Skip to Step 2 Search and store new TV
channels if your system settings are correct.
1. Press MENU on the remote control
and select TV menu > Installation
> Channel installation > Analogue:
Manual installation.
Channel install...
Analogue: Manual...
Automatic install...
Installation update
Digital: Test recept...
Analogue: Manual...
Rearrange
System
Search
Fine tune
Store current ch...
Store as new ch...
1. Press Start to start installation.
The installation may take a few minutes.
2. Press Æ to enter the Channel
installation menu. System is highlighted.
2. When complete, press Finish to return to
the Installation menu.
3. Press Æ to enter the System list.
3. Press MENU to exit.
4. Press Î or ï to select your country or
region.
DDNote
5. Press Í to return to the Channel
installation menu.
EN-33
ENglish
4. Press OK to confirm.
Step 2 Search and store new TV channels
6.3 Rename channels
1. Press MENU on the remote control
and select TV menu > Installation
> Channel installation > Analogue:
Manual installation > Search.
1. Press MENU on the remote control
and select TV menu > Installation >
Channel installation > Rearrange.
2. Press Æ to enter the Search menu.
3. Press the red key and use the number keys
on the remote control to manually enter
the three digit frequency. Alternatively, press
the green key to automatically search for
the next channel.
4. Press Í when the new channel is found.
5. Select Store as new channel to store the
new channel under a new channel number.
6. Press Æ to enter.
7. Press OK. Done appears.
8. Press MENU to exit.
6.2.1 Fine tune analogue channels
You can manually fine tune analogue channels
when reception is poor.
1. Press MENU on the remote control
and select TV menu > Installation
> Channel installation > Analogue:
manual installation > Fine tune.
2. Press Æ to enter the Fine tune menu.
3. Press Î or ï to adjust the frequency
2. Press Æ to enter the Rearrange list.
3. Press Î or ï in the Rearrange list to
select the channel you want to rename.
4. Press the red key.
5. Press Í and Æ to select characters or Î
and ï to change the characters. Space,
numbers (0-9) and other special characters
are located between z and A.
6. Press the green key or OK to finish.
EETip
Delete all characters by pressing the yellow
key. Delete only the highlighted character by
pressing the blue key.
6.4 Uninstall or reinstall
channels
You can uninstall a stored channel or reinstall
an uninstalled channel.
1. Press MENU on the remote control
and select TV menu > Installation >
Channel installation > Rearrange.
2. Press Æ to enter the Rearrange list.
4. Press Í when done.
3. Press Î or ï to select the channel you
want to uninstall or reinstall.
5. Select Store current channel to store
the fine tuned channel under the current
channel number.
4. Press the green key to uninstall or reinstall
the channel.
6. Press Æ to enter.
7. Press OK. Done appears.
8. Press MENU to exit.
5. Press MENU to exit.
6.5 Rearrange channels
1. Press MENU on the remote control
and select TV menu > Installation >
Channel installation > Rearrange.
EN-34
3. Press Î or ï to select the channel you
want to rearrange.
4. Press the yellow key to move the channel
up the list. or press the blue key to move
the channel down the list.
5. Press MENU to exit.
6.6 Manually update the channel
list
If your TV is in standby mode, an update is
performed every morning. This update matches
channels stored in your channel list with those
available from your broadcaster. If a channel is
unavailable, it is automatically removed from
the channel list.
In addition to the automatic update, you can
manually update the channel list.
1. Press MENU on the remote control
and select TV menu > Installation >
Channel installation > Installation
update.
2. Press Æ to enter the Installation update
menu. Start now is highlighted.
3. Press OK.
4. Press the green key to start the update.
This may take a few minutes.
5. When the update is complete, press
the red key to return to the Channel
installation menu.
and select TV menu > Installation >
Channel installation > Digital: Test
reception.
2. Press Æ to enter the Digital: Test
reception menu.
3. Press OK.
4. Press the green key to automatically start
the test or manually enter the frequency of
the channel you want to test. If the signal
quality and strength is poor, reposition the
antenna or satellite dish and retest.
5. When complete, press the yellow key to
store the frequency.
6. Press the red key to return to the
Channel installation menu.
7. Press MENU to exit.
DDNote
If you have further problems with the
reception of your digital broadcast, contact
a specialised installer.
6.8 Start a demo
1. Press the red key on the remote control.
Alternatively, press MENU on the remote
control and select TV menu > Features
> Demo.
2. Press Æ to enter the Demo menu.
3. Select a demo and press OK.
4. Press the red key to exit.
6. Press MENU to exit.
6.7 Test digital reception
If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
1. Press MENU on the remote control
EN-35
ENglish
2. Press Æ to enter the Rearrange list.
6.9 Reset TV to factory settings
Resetting your TV to factory settings restores
default picture and sound settings. Channel
installation settings remain the same.
1. Press MENU on the remote control
and select TV menu > Installation >
Factory settings.
2. Press Æ to enter the Factory settings
menu. Reset is highlighted.
3. Press OK to reset to factory settings.
4. Press MENU to exit.
EN-36
Connect devices
ENglish
7
7.1 Connection overview
Back connectors
1. EXT 1
First SCART connector for DVD players,
VCRs, digital receivers, game consoles and
other SCART devices. Supports Audio L/R,
CVBS in/out, RGB.
2. EXT 2
Second SCART connector. Supports Audio
L/R, CVBS in/out, RGB.
3. EXT 3
Component video (Y Pb Pr) and Audio
L/R input connectors for DVD players,
digital receivers, game consoles and other
component video devices.
4. SPDIF OUT
SPDIF sound output connector for home
theatres and other audio systems.
5. AUDIO OUT L/R
Sound output cinch connectors for home
theatres or other audio systems.
6. TV ANTENNA
7. HDMI 1/2/3
HDMI input connectors for Blu-ray Disc
players, digital receivers, game consoles and
other high-definition devices.
DDNote
The number of HDMI connectors available
may vary according to your TV model.
8. AUDIO IN
Mini-jack connector for PC audio in (when
connecting a PC via a DVI-HDMI adaptor).
EN-37
Side connectors
9. Headphones
Stereo mini-jack.
10. AUDIO L/R
Audio L/R input connectors for composite
and S-Video devices.
11. VIDEO
Video input cinch connector for composite
devices.
12. S-VIDEO
S-Video input connector for S-Video
devices.
7.2 Select connection quality
This section describes how you can enhance
your audio visual experience by connecting
your devices with the best possible connectors.
After connecting your devices, be sure to
enable them as described in Section 7.4 Setup
devices.
7.2.1 HDMI - Highest quality
13. USB
USB connector for storage devices.
14. HDMI
Additional HDMI connector for mobile
high-definition devices.
15. COMMON INTERFACE
Slot for Conditional Access Modules.
HDMI produces the best audio visual quality
possible. Both audio and video signals are
combined in one HDMI cable, providing an
uncompressed, digital interface between your
TV and HDMI devices. You must use HDMI to
experience full high-definition video. You must
also use HDMI cables to enable Philips EasyLink
as described in Section 7.5 Use Philips EasyLink.
EETip
If your PC only has a DVI connector, use a
DVI-HDMI adaptor to connect your device
to a HDMI connector at the back of the TV.
You must connect a separate audio cable
from the device to the AUDIO IN mini-jack
connector.
DDNote
Philips HDMI supports HDCP (Highbandwidth Digital Contents Protection).
HDCP is a form of Digital Rights
Management that protects high definition
content in DVD or Blu-ray Discs.
EN-38
Component (Y Pb Pr) video provides better
picture quality than S-Video or composite
video connections. Though component video
supports high-definition signals, picture quality
is lower than HDMI and is analogue.
When connecting a component video cable,
match the cable colours to the EXT 3
connectors on the back of the TV. Also, connect
a Audio L/R cable to the red and white Audio
L/R input connectors at EXT 3.
7.2.4 S-Video - Good quality
An analogue connection, S-Video provides
better picture quality than composite video.
When connecting your device with S-Video,
plug the S-Video cable to the S-Video
connector on the side of the TV. You must
connect a separate Audio L/R cable from
the device to the red and white Audio L/R
connectors on the side of the TV.
S-Video cable
Component video
cable
- Red, Green, Blue
Audio L/R cable
- Red, White
7.2.3 SCART - Good quality
SCART combines audio and video signals in
one cable. Audio signals are stereo, while video
signals can be composite or S-Video quality.
SCART does not support high-definition video
and is analogue. Two SCART connectors are
provided on the TV, EXT 1 and EXT 2.
Audio L/R cable
- Red, White
7.2.5 Composite - Basic quality
Composite video provides basic analogue
connectivity, usually combining a (yellow) video
cinch cable with (red and white) Audio L/R
cinch cable. Match the cable colours when
connecting to the composite Video and Audio
L/R input connectors on the side of the TV.
Composite audio/video cable - Yellow, red and
white
EN-39
ENglish
7.2.2 Component (Y Pb Pr) - Higher
quality
7.3 Connect devices
This section describes how to connect
various devices with different connectors and
supplements examples provided in the Quick
Start Guide.
CCCaution
Disconnect the mains cord before
connecting devices.
DDNote
Different types of connectors may be used
to connect a device to your TV, depending
on availability and your needs.
7.3.1 Blu-ray Disc player
For full high-definition video, connect a HDMI
cable as illustrated:
7.3.2 DVD player
For DVD video, connect a SCART cable as
illustrated:
DVD Player
EN-40
7.3.3 Satellite receiver
ENglish
To receive analogue channels via antenna
and digital channels via a satellite receiver,
connect an antenna cable and SCART cable as
illustrated:
Satellite receiver
7.3.4 HD digital receiver
To receive analogue channels via antenna
and digital channels via a HD digital receiver,
connect two antenna cables and HDMI cable as
illustrated:
HDMI
OUT
OUT
IN
HD Digital receiver / HD Satellite receiver
EN-41
7.3.5 Combined DVD recorder and
digital receiver
To receive analogue channels via antenna and
record programs on a combined DVD recorder
and digital receiver, connect two antenna cables
and one SCART cable as illustrated:
OUT
IN
DVD Recorder / Digital receiver
7.3.6 Separate DVD recorder and
receiver
To receive analogue channels via antenna
and record programmes on a separate DVD
recorder and receiver, connect three antenna
cables and three SCART cables as illustrated:
OUT
DVD Recorder
EN-42
IN
OUT
Receiver / Cable box
IN
ENglish
7.3.7 DVD recorder and home theatre
system
To receive analogue channels via antenna,
output sound to a home theatre system and
record programmes on a DVD recorder,
connect two antenna cables, one SCART cable
and two digital audio cables as illustrated:
DDNote
If using a home theatre or other audio
system, the best synchronisation between
images and sound is achieved by connecting
the audio signal from your playback device
to the TV first. Subsequently, channel the
audio signal to the home theatre system or
audio device via the audio connectors on
the back of the TV.
7.3.8 Game console or camcorder
The most practical connection for a mobile
game console or camcorder may be at the side
of the TV. You can, for example, connect the
game console or camcorder to VIDEO/S-Video
and AUDIO L/R connnectors at the side of
the TV. A HDMI connector is also available for
high-definition devices.
EN-43
A permanent game console or camcorder can
be connected to a HDMI connector or EXT 3
(component) connectors at the back of the TV.
7.3.9 Personal Computer
Before connecting the PC:
• Set the PC monitor refresh rate to 60Hz.
See Section 8 Technical specifications for a list
of computer resolutions.
• Change the TV picture format to Unscaled
as described in Section 5.3.4. Change picture
format.
To connect a PC to the back of the TV
7.4 Setup devices
When all devices are connected, you must
select the type of device attached to each
connector.
7.4.1 Assign devices to connectors
For easy selection and best signal handling,
assign the device connected to the connectors
on your TV.
1. Press MENU on the remote control
and select TV menu > Installation >
Connections.
Connections
EXT 1
1. Using a HDMI to DVI cable or a HDMI-toDVI adaptor (attached to a HDMI cable),
connect a HDMI connector on the back of
your TV to the DVI connector on your PC.
EXT 1
None
DVD
Blu-ray
HDD/DVDR
2. Connect an audio cable from your PC to
the AUDIO IN mini-jack connector at the
back of the TV.
HDMI 3
Side
Game
...
...
DDNote
You must assign the AUDIO IN mini-jack
connector to the HDMI connector as
described in Section 7.4.3 Assign the AUDIO
IN mini-jack connector.
EXT 2
EXT 3
HDMI 1
HDMI 2
HD rec.
VCR
2. Press Æ to enter the list.
3. Press ï or Î to select a connector.
4. Press Æ to enter the list.
5. Press ï or Î to select the device attached
to the connector.
6. Press OK to select the device.
7. Repeat the procedure until all devices are
correctly assigned to connectors.
8. Press MENU to exit.
7.4.2 Assign the AUDIO IN mini-jack
connector
If you connect audio from a PC to the AUDIO
IN mini-jack connector at the back of the TV,
you must associate it to the HDMI connector.
1. Press MENU on the remote control
and select TV menu > Installation >
EN-44
Connections
AUDIO IN L/R
...
EXT 3
None
HDMI 1
HDMI 1
HDMI 2
HDMI 2
HDMI 3
7.5.1 Enable or disable EasyLink
1. Press MENU on the remote control
then select TV menu > Installation >
Preferences > EasyLink.
2. Select On or Off.
HDMI 3
Side
AUDIO IN L/R
2. Press Æ to enter the list.
3. Press ï or Î to select the HDMI
connector used by the PC.
4. Press MENU to exit.
7.4.3 Assign a channel decoder
Decoders that decode digital channels can be
connected to EXT 1 or EXT 2 (SCART). You
have to assign the TV channel as a channel to
be decoded. Then assign the connection where
the decoder is connected.
1. Press MENU on the remote control
and select TV menu > Installation >
Decoder > Channel.
2. Press Æ to enter the list.
3. Press ï or Î to select the channel to
decode.
4. Press Í and go back to select Status.
5. Press ï or Î to select the connector used
by the decoder.
6. Press MENU to exit.
7.5 Use Philips EasyLink
Your TV supports Philips EasyLink, which
enables one-touch play and one-touch standby
between EasyLink-compliant devices. Compliant
devices must be connected to your TV via
HDMI and assigned as described in Section 7.4.1
Assign devices to connectors.
7.5.2 Use one-touch play
• After enabling EasyLink, press play on your
device. The TV automatically switches to
the correct source.
7.5.3 Use one-touch standby
• Press and hold . STANDBY on the TV
or device remote control for at least three
seconds. The TV and all connected HDMI
devices switch to standby.
7.6 Prepare TV for digital
services
Scrambled digital TV channels can be decoded
with a Conditional Access Module (CAM) and
a Smart card provided by a digital TV service
operator.
The CAM may enable several digital services,
depending on the operator and services
you choose (for example, pay TV). Contact
your digital TV service operator for more
information about services and terms.
7.6.1 Using the Conditional Access
Module
BBWARNING
Switch off your TV before inserting a CAM.
Be sure to follow the instructions described
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
1. Following the directions printed on the
CAM, gently insert the CAM into the
Common Interface on the side of the TV.
EN-45
ENglish
Connections > Audio In L/R.
DDNote
Do not remove the CAM from the slot.
Removing the CAM will deactivate the
digital services.
7.6.2 Access CAM services
2. Push the CAM in as far as it will go.
• After inserting and activating the CAM,
press MENU on the remote control and
select TV menu > Features > Common
interface.
This menu option is only available if the CAM
is correctly inserted and activated. On-screen
applications and content are provided by your
digital TV service operator.
3. Turn on the TV and wait for the CAM to
be activated. This may take several minutes.
EN-46
Technical
specifications
Supported display resolutions
• Computer formats
Resolution
Refresh rate
640 x 480
60Hz
800 x 600
60Hz
1024 x 768
60Hz
1920 x 1080i
60Hz
1920 x 1080p
60Hz
• Video formats
Resolution
480i
480p
576i
576p
720p
1080i
1080p
1080p
Refresh rate
60Hz
60Hz
50Hz
50Hz
50Hz, 60Hz
50Hz, 60Hz
24Hz, 25Hz, 30Hz
50Hz, 60Hz
• EXT 3: Component (Y Pb Pr), Audio L/R in
• HDMI 1/2/3
DDNote
The number of HDMI connectors available
may vary according to your TV model.
• SPDIF OUT: Digital audio out (coaxialcinch-S/PDIF). Display synchronised.
• AUDIO OUT L/R: Analogue audio out.
• TV ANTENNA
• AUDIO IN: Mini-jack audio in for PC DVIHDMI connections.
Connections (Side)
• Headphone out (stereo mini-jack)
• AUDIO L/R in
• Video (CVBS) in
• S-Video
Tuner / Reception / Transmission
• Antenna input: 75ohm coaxial (IEC75)
• USB
• TV system: DVB COFDM 2K/8K
• Common Interface (CAM slot)
• Video playback: NTSC, SECAM, PAL
• DVB Terrestrial (see listed countries on the
back of the TV)
Multimedia
• Connection: USB
• Playback formats: MP3, Linear PCM, slide
show (.alb), JPEG
Remote control
• Type: RCPF02E08B/RCPF05E08B
• HDMI
Power
• Mains power: AC 220-240V (±10%)
• Power and standby power consumption:
See technical specifications at www.philips.
com
• Ambient temperature: 5°C - 35°C
Specifications are subject to change without
notice. For detailed specifications of this
product go to www.philips.com/support.
• Batteries: 2 x AAA size (LR03 type)
Connections (Rear)
• EXT 1 (SCART): Audio L/R, CVBS in/out,
RGB
• EXT 2 (SCART): Audio L/R, CVBS in/out,
RGB
EN-47
ENglish
8
9
Troubleshooting
This section describes commonly-encountered
issues and accompanying solutions.
• No action is required. The creaking sound
is normal expansion and contraction of the
TV as it cools and warms up. This does not
impact performance.
9.1 General TV issues
9.2 TV channel issues
The TV does not switch on:
• Unplug the mains cord, wait for one minute
and plug in the mains again.
Previously installed channels do not
appear in the channel list:
• Verify that the correct list is selected.
• Verify that the mains cord is properly
connected and that the mains are powered.
• The channel may have been uninstalled
to the Rearrange menu. To access the
menu, press MENU on the remote control
and select TV Menu > Installation >
Channel installation > Rearrange.
The remote control is not working
properly:
• Verify that the remote control batteries
are correctly inserted according to the +/orientation.
• Replace the remote control batteries if
they are flat or weak.
• Clean the remote control and TV sensor
lens.
The standby light on the TV blinks red:
• Turn off the TV and unplug the mains
cord. Wait until the TV cools down before
reinserting the mains cord and turning on
the TV. If the blinking occurs again, contact
our Customer Support Centre.
You forgot your code to unlock Child
lock
• Enter ‘8888’ as described in Section 5.8.3
Lock TV channels or connected devices (Child
lock).
The TV menu is in the wrong language
• See Section 6.1 Automatically install channels
for instructions on how to change the TV
menu to your preferred language.
When turning the TV on/off/to standby,
you hear a creaking sound from the TV
chassis:
EN-48
No digital channels were found during
the installation:
• Verify if the TV supports DVB-T in your
country. See the listed countries on the
back of the TV.
9.3 Picture issues
The power indicator is on, but there is no
picture:
• Verify if the antenna is connected properly.
• Verify if the correct device is selected.
There is sound but no picture:
• Verify that picture settings are correctly set.
See Section 5.3.2 Adjust picture settings.
You receive poor TV reception from an
antenna connection:
• Check that the antenna is properly
connected to the TV.
• Loud speakers, unearthed audio devices,
neon lights, high buildings or mountains can
influence the picture quality. Try to improve
the reception quality by changing the
antenna direction or moving devices away
from the TV.
• If reception on only one channel is poor,
try to fine tune this channel. See Section
6.2.1 Fine tune channels.
You receive poor picture quality from
connected devices:
• Check that the devices are connected
properly. Also, be sure to assign devices to
connectors as described in Section 7.4.1
Assign devices to connectors.
• Verify that picture settings are correctly set.
See Section 5.3.2 Adjust picture settings.
The TV did not save my settings:
• Verify that the TV is set to Home mode,
which offers you complete flexibility to
change settings. See Section 5.4 Change to
Shop or Home mode.
The picture does not fit the screen, it is
too big or too small:
• Try using a different picture format as
described in Section 5.3.4 Change picture
format.
• Assign your device to connectors as
described in Section 7.4.1 Assign devices to
connectors.
The picture position on screen is not
correct:
• Picture signals from some devices do not
fit the screen correctly. Check the signal
output of the device.
9.4 Sound issues
There is picture but no sound from the
TV:
DDNote
If no audio signal is detected, the TV
automatically switches off audio output and
does not indicate malfunction.
ENglish
• Verify if the correct TV system is selected
for your region.See Section 6.2 Manually
install channels.
• Check that all cables are properly
connected.
• Check that the volume is not set to 0.
• Check that the sound is not muted.
There is picture but sound quality is
poor:
• Check Sound settings as described in
Section 5.3.5 Adjust sound settings, verifying
that Stereo selected and Equalizer
settings are correct. If needed, try resetting
audio settings to standard.
There is picture but sound comes from
one speaker only:
• Verify that Balance correctly set as
described in Section 5.3.5 Adjust sound
settings.
9.5 HDMI connection issues
You encounter problems with HDMI
devices
• HDCP support can delay the time taken for
a TV to display content from a device.
• If the TV does not recognise the device and
the screen displays no picture, try switching
from one device to another and back again
to restart.
• If you experience intermittent sound
disruptions, check the user manual of the
HDMI device to verify that output settings
are correct. Alternatively, try connecting the
audio signal from the HDMI device to the
TV via AUDIO IN at the back of the TV.
• If a HDMI-to-DVI adaptor or HDMI to
DVI cable is used, check that an additional
audio cable is connected to AUDIO IN. You
must also assign the audio connector as
described in Section 7.4.2 and 7.4.3.
EN-49
9.6 USB connection issues
The TV does not display the USB device
content:
• Set your device to ‘Mass Storage Class’
compliant, as described in your device
documentation.
• Your USB device may not be compatible
with the TV.
• Not all audio and picture files are
supported. See Section 8 Technical
specifications for a list of supported file
types.
Audio and picture files do not play or
display smoothly
• The transfer performance of the USB
device may limit the transfer rate.
9.7 PC connection issues
The PC display on my TV is not stable or
is not synchronised:
• Check that a supported resolution and
refresh rate is selected on your PC.
See Section 8 Technical specifications for
supported resolutions and refresh rates.
EN-50
A
Active Control 19
All channels list 24
Analogue
Channel installation 33
Fine tune channels 34
Antenna
Connect 9
Assign
Devices 44
Audio language 21
Automatic
Channel installation 32
Surround 21
Volume leveling 21
B
Back connectors 5
Balance
Sound 21
Brightness 18
C
Care
Environment 4
Screen 4
Channels
All channels list 24
Change 12
Decoder 45
Favorite lists
Select 24
Setup 24
Use 24
Installation
Automatic 32
Manual 33
Rearrange 34
Rename 34
Test digital reception 35
Uninstall 34
Update channel list 35
Child lock
Lock all channels/devices 27
Lock from a certain time 27
Lock one or more channel/device 27
Set/change code 26
Set parental rating 27
Clock 17
Colour enhancement 19
Component cable 39
Composite 39
Conditional Access Module (CAM)
Insert 45
Menu 46
Connections
Back connectors 37
Cable quality
Component 39
Composite 39
HDMI 38
SCART 39
S-Video 39
Devices
Blu-ray Disc player 40
Conditional Access Module (CAM) 45
DVD player 40
DVD recorder/Digital receiver 42
DVD recorder/Home theatre system 43
DVD recorder/Receiver 42
Game console/camcorder 43
HD digital receiver 41
PC 44
Satellite receiver 41
USB 28
Philips Easylink
Enable/disable 45
Use 45
Setup devices
EN-51
ENglish
10 Index
Assign channel decoder 45
Assign to connectors 44
Side connectors 38
Contrast 18
Country
Selection 32
Custom tint 18
D
Decoder 45
Delta volume 21
Demo 35
Devices
Watch 12
Digital
Radio 30
Services 45
Teletext 23
Dual I/II 21
Dual screen teletext 22
Dynamic contrast 19
E
Electronic Programme Guide
Use 25
Environmental care 4
Equalizer 21
F
Factory setting 36
Favorite lists 24
Fine tune channels 34
H
HDCP 38
HDMI cable 38
Home mode 22
Hue 18
K
Kensington lock 7
EN-52
L
Language
Audio 21
Menus 32
Subtitles 28
Light sensor 19
M
Mains
Connect 9
Manual channel installation 33
Menus
Child lock 26
Language 32
Main
Access 16
Use 16
Quick access
Use 17
Teletext menu 23
Mono sound 21
Mute 15
N
Noise reduction 19
O
On timer 26
P
Parental rating 27
Philips EasyLink 45
Photos and music
Connect USB device 28
Listen to music 29
View photos 29
View slide show with music 30
Picture
Adjust settings
Active Control 19
Brightness 18
Q
Quick access menu 17
R
Radio channels 30
Rearrange channels 34
Recycling product 4
Remote control
Advanced use 14
Basic use 6
Batteries 10
Rename channels 34
Reset to factory settings 36
S
Safety information 3
SCART cable 39
Screen care 4
Settings
Picture
Adjust settings 18
Change format 20
Use Settings assistant 18
Use smart settings 19
Sound
Adjust settings 21
TV location
Change location 22
Setup devices 44
Sharpness 18
Shop mode 22
Side
Connectors 5
Controls 5
Sleeptimer 26
Smart settings
Current 19
Movie 19
Standard 19
Vivid 19
Software update
Check availability 30
Check version 30
Update (analogue) 31
Update (digital) 30
Sound
Adjust settings
Audio language 21
Automatic volume leveling 21
Auto surround 21
Balance 21
Delta volume 21
Dual I/II 21
Equalizer 21
Headphone volume 21
Mono/Stereo 21
Surround mode 21
Volume 21
Stereo sound 21
Subtitles
Analogue TV 27
ENglish
Colour 18
Colour enhancement 19
Contrast 18
Custom tint 18
Dynamic contrast 19
Hue 18
Light sensor 19
Noise reduction 19
Sharpness 18
Tint 18
Change format 20
Use Settings assistant 18
Use smart settings
Current 19
Movie 19
Standard 19
Vivid 19
Position TV 7
Power
Connect 9
EN-53
Digital TV 28
Language 28
Surround sound
Auto 21
Mode 21
S-Video 39
Switch TV
Off 11
On 10, 11
On from standby 11
To standby 11
System selection 33
T
Technical specifications 47
Teletext
Advanced use
Cycle subpages 23
Digital teletext 23
Dual screen 22
Enlarge 23
Language 23
Reveal 23
Search 22
Select subpages 22
Teletext 2.5 23
T.O.P broadcasts 22
Timers
On timer 26
Sleeptimer 26
Time zone 33
Tint 18
T.O.P. teletext 22
Troubleshooting 47
TV
Channel installation 32
Channels
Change 12
Favorite lists 24
Child lock 26
Connect
EN-54
Antenna 9
Mains 9
Connections
Back 37
Devices 40
Quality 38
Side 38
Demo 35
Electronic Programme Guide 25
Get started 7
Main menus
Access 16
Use 16
Overview 5
Photos and music 28
Position 7
Ideal distance 7
Quick access menu
Use 17
Remote control
Advanced use 14
Basic use 6
Batteries 10
Reset to factory setting 36
Side controls 5
Software update 30
Stand 8
Subtitles 27
Switch
Off 11
On 10, 11
On from standby 11
To standby 11
Teletext
Advanced use 22
Basic use 13
Timers
On timer 26
Sleeptimer 26
Volume 12
Wall mount 7
ENglish
Watch
Channels 12
Devices 12
U
Uninstall channels 34
USB device
Connect 28
Disconnect 28
V
VESA wall bracket 7
Video formats 47
Volume
Adjust 12, 21
Automatic leveling 21
Delta 21
Headphone 21
W
Wall mount TV 7
Y
Y Pb Pr 39
EN-55
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 3139 125 39504

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement