advertisement
QUICK
START
GUIDE
for the
LiftMaster Internet Gateway
Before Starting
STOP
Before starting you MUST have:
• a router
• active internet connection
• internet gateway serial
number
Look at the label on the bottom of the internet gateway and record the serial number below.
To prevent possible SERIOUS INJURY or DEATH:
• When the LiftMaster Internet Gateway is used
with a garage door opener, the opener MUST
ONLY be installed with sectional doors.
Connect
Router
Power
Adapter
LiftMaster
Internet
Gateway
Ethernet
Cable
Green
Light
1. Connect power and router
Connect ethernet cable to router and the internet gateway. Connect power to the internet gateway.
When the internet gateway connects to the internet, the green light will stop blinking and will light solid.
If the green light does not light solid, check the power, router, and internet connections to the internet gateway.
Create
2. Create an Account
Visit www.myliftmaster.com to create an account.
If you already have an account, log in using your
account email address and password.
Register
3. Register the internet gateway
Enter the Serial Number from the Before Starting
section (or see label on the bottom of the internet gateway).
FLIP
Add
Mobile
Go to the LiftMaster
Mobile Site: www.myliftmaster.com/mobile and log in.
OR
Computer
4. Add MyQ™ Devices
Use an internet enabled computer or smartphone to add devices. After you add a device, the blue light on the internet gateway will appear and stay on.
Test
Try Our New LiftMaster App
DOWNLOAD FROM:
• iTunes App Store
• Blackberry App World
• Android Marketplace
5. Test it!
Try viewing and controlling your newly added device from an internet enabled computer or
smartphone.
Need Help?
Go to the Help section at www.MyLiftMaster.com, or call LiftMaster
Technical Support at 1-800-528-9131.
One Year Limited Warranty
The Chamberlain Group, Inc. warrants to the first retail purchaser of this product that is free from defect in materials and/or workmanship
for a period of 1 year from the date of purchase.
NOTICE: To comply with FCC and/or Industry Canada (IC) rules. adjustment or
modifications of this transceiver are prohibited. THERE ARE NO USER
SERVICEABLE PARTS.
This device complies with Part 15 of the FCC rules and IC RSS-210. Operation
is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
©2011 The Chamberlain Group, Inc.
All Rights Reserved
114A4341
GUIDE DE
DÉMARRAGE
RAPIDE
de la passerelle
Internet de LiftMaster
AVERTISSEMENT
Avant de commencer
ARRÊT
Avant de commencer, vous DEVEZ avoir :
• Un routeur internet
• Une connexion internet active
• Le numéro de série du
passerelle internet
Regarder l'étiquette située au bas de la passerelle
Internet et enregistrer le numéro de série qui y figure.
Pour éviter des BLESSURES GRAVES, voire MORTELLES :
• Lorsque la passerelle Internet de LiftMaster est
utilisée avec un ouvre-porte de garage, ce dernier
DOIT être installé UNIQUEMENT avec des
portes articulées.
AVERTISSEMENT
Brancher
Adaptateur d'alimentation
Routeur
Passerelle
Internet de
LiftMaster
Ethernet
Câble
Témoin vert
1. Brancher l'alimentation et le routeur
Brancher un câble Ethernet au routeur et à la passerelle Internet. Brancher l'alimentation à la passerelle Internet. Quand le passerelle internet se connecte à l’internet, le voyant lumineux vert s’arrêtera de clignoter et deviendra ininterrompu.
Si le voyant lumineux vert ne devient pas ininterrompu, vérifiez l’alimentation en courant, le routeur internet et les connexions internet au passerelle internet.
AVERTISSEMENT
Créer
2. Créer un compte
Aller sur www.myliftmaster.com pour créer un compte.
Si on a déjà un compte, se connecter en utilisant son adresse électronique et son mot de passe.
Enregistrer
3. Enregistrer la passerelle Internet
Saisir le numéro de série mentionné dans la section
Avant de commencer (ou voir l'étiquette figurant au bas de la passerelle Internet).
AVERTISSEMENT
AVERTISSEMENT
Ajouter
Mobile
Aller au site mobile de LiftMaster : www.myliftmaster.com/mobile et se connecter.
OU
Ordinateur
4. Ajouter des périphériques MyQ™
Utiliser un ordinateur branché à l'Internet ou un téléphone intelligent pour ajouter des périphériques.
Une fois qu'on ajoute un périphérique, le témoin bleu de la passerelle Internet s'allumera et restera allumé.
AVERTISSEMENT
Essai
Essayer la nouvelle application de LiftMaster
LA TÉLÉCHARGER SUR :
• iTunes App Store
• Blackberry App World
• Android Marketplace
5. La mettre à l'essai!
Essayer d'afficher et de contrôler le nouveau périphérique à partir d'un ordinateur branché à l'Internet ou d'un téléphone intelligent.
AVERTISSEMENT
Besoin d'aide?
Aller à la section Aide du site Web www.MyLiftMaster.com, sinon appeler le service de soutien technique de LiftMaster au 1-800-528-9131.
Garantie Limitée De Un An
La société Chamberlain Group Inc. garantit à l’acheteur au détail initial de ce produit que le produit est exempt de tout défaut de matière ou vice de fabrication pour une période de un an à compter de la date d’achat.
AVIS : Les règles de la FCC et/ou d’Industrie Canada (IC) interdisent tout ajustement ou toute modifi cation de cerécepteur. IL N’EXISTE AUCUNE PIÈCE
SUSCEPTIBLE D’ÊTRE ENTRETENUE PAR L’UTILISATEUR.
Cet appareil est conforme aux dispositions de la partie 15 du règlement de la
FCC et de la norme IC RSS-210. Sonutilisation est assujettie aux deux conditions suivantes : (1) ce dispositif ne peut causer des interférences nuisibles, et (2) ce dispositif doit accepter toute interférence reçue, y compris une interférence pouvant causer un fonctionnement non souhaité.
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
©2011 The Chamberlain Group, Inc.
Tous droits réservés
114A4341
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement