MAC 401 Dual specification

MAC 401 Dual specification
MAC 401 Dual TM
The MAC 401 Dual is a creatively fresh and versatile LED
moving head washlight with an innovative double-sided design
that gives it flexible dual functionality, for example as a double
washlight or beam reflective mirror. The MAC 401 Dual's
advanced wash characteristics combine with a host of other
useful features like fast zoom and individual LED segment
control to add a new and inventive element to touring and
rental applications, TV shows, corporate events, night-time
venues and leisure environments.
· LED source
· 50,000 hour lifetime
· Thirty-six, multi-color, single-point source LEDs
· RGB or HSV color mixing
· Fully blends colors before they leave each lens
· Variable CTC
· Over 6500 lumens of output
· Speedy zoom
· Broad beam look
· 36 lenses in four individually controllable groups
· 16-50° beam angle
· Built-in macro effects
· Quiet temperature-controlled fan cooling
· Silent mode option
· Extremely energy efficient
· Greater reliability, less maintenance
· Double washlight, beam reflective mirror, upcoming options
· Accessory gel frame holder
· RGB and Hue/Saturation control modes
Dynamic Effects
Control and Programming
Length: 221 mm (8.7 in.)
Width: 505 mm (19.9 in.)
Height: 527 mm (20.7 in.)
Weight: 21 kg (46.3 lbs.) incl. 2 head modules, excl. brackets
Color mixing: RGB or HSV
Red or hue: 0 - 100%
Green or saturation: 0 - 100%
Blue or value: 0 - 100%
Color temperature control: Variable 10 000 - 2000 K
Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed
Electronic 'color wheel' effect: color-wheel rotation effect and random color
Pre-programmed effects: Two superimposable chase/pulse/flip/flicker/strobe/static effects
Pre-programmed effects: with variable intensity, x-fading and 'pixel wheel' rotation
Pre-programmed effects: speed
Strobe effect: Electronic, with pulse and random effects
Electronic dimming: 0 - 100%, four dimming curve options
Zoom: 16° in Hypermode, 20° - 50°
Pan: 630° with two speed settings
Tilt: 300° with two speed settings
Light source: 36 Osram multi-color LED high power emitters
Control: DMX
Color control modes: RGB or HSV
DMX channels: 13/17/21/25/33 depending on control mode & pixel grouping
Setting and addressing: Control panel with LED display
Protocol: USITT DMX512/1990
Transceiver: RS-485
Color: Black
Housing: High-impact flame-retardant thermoplastic and die-cast aluminum
Protection rating: IP20
Mounting points: 2 pairs of 1/4-turn locks
Orientation: Any
Olof Palmes Allé 18
8200 Århus N
Tel. +45 87 40 00 00
Fax +45 87 40 00 10
MAC 401 Dual TM
Minimum distance to combustible materials: 200 mm (7.9 in.)
Minimum distance to illuminated surfaces: 200 mm (7.9 in.)
Minimum distance to persons and objects in beam zone: 1 m (3.3 ft.)
AC power input: Neutrik PowerCon
DMX data in/out: 5-pin locking XLR, RJ-45
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Electronic switch mode
Main fuses: 10 AT (slow blow) x 2
Maximum total power consumption: 386 W (one RGB/zoom LED module installed)
Maximum total power consumption: 766 W (two RGB/Zoom LED modules installed)
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum surface temperature, steady state: 80° C (176° F)
Total heat dissipation (calculated, +/- 10%), one module installed: 1312 BTU/hr
Total heat dissipation (calculated, +/- 10%), two modules installed: 2604 BTU/hr
EU safety: EN 60598-2-17
EU EMC: EN 61000-6-1, EN 61000-6-3
US safety: UL 1573
Canadian safety: CAN/CSA-E598-2-17
Included Items
Related Items
Spare Parts
Ordering Information
MAC 401 RGB Zoom Module (installed): P/N 91611325
Two Omega clamp attachment brackets with 1/4-turn fasteners: P/N 91602001
User manual: P/N 35000229
Neutrik PowerCon NAC3FCA male input connector: P/N 05342804
Two 10 AT main fuses (installed): P/N 05021029
MAC 401 Dual TM Color Frame Kit: P/N 91610102
MAC 401 Dual" RGB Zoom Module: P/N 91611325
MAC 401" Dual CT Zoom Module: P/N 91611349
MAC 401 Dual TM Double Flightcase: P/N 91510150
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
Quick trigger clamp: P/N 91602007
Safety wire, universal, safe working load 50 kg (110.2 lbs.): P/N 91604003
Martin Universal USB/DMX Interface Box: P/N 90509008
10 AT main fuse: P/N 05021029
Replacement head air filter: P/N 62407156
MAC 401 Dual TM , in cardboard box: P/N 90231200
Photometric Data
Standard (All LEDs on) , Zoom
at Hypermode
Efficacy: 8.2 lumens per watt
One-tenth peak angle: 17°
Total output: 3000 lm
Standard (All LEDs on) , Zoom
at Minimum
Efficacy: 12.4 lumens per watt
One-tenth peak angle: 21°
Total output: 4600 lm
Olof Palmes Allé 18
8200 Århus N
Tel. +45 87 40 00 00
Fax +45 87 40 00 10
Standard (Only Blue LEDs on) , Zoom
at Maximum
MAC 401 Dual TM
Efficacy: 5.5 lumens per watt
One-tenth peak angle: 43°
Total output: 650 lm
Standard (Only Green LEDs
on) , Zoom at Maximum
Efficacy: 25.3 lumens per watt
One-tenth peak angle: 43°
Total output: 5200 lm
Standard (Only Red LEDs on) , Zoom
at Maximum
Efficacy: 13.6 lumens per watt
One-tenth peak angle: 48°
Total output: 1300 lm
Standard (All LEDs on) , Zoom
at Maximum
Efficacy: 18 lumens per watt
One-tenth peak angle: 49°
Total output: 6600 lm
Published on: 12 Aug 2010. © 2009-2010 Martin Professional A/S. Specifications subject to change without notice
Olof Palmes Allé 18
8200 Århus N
Tel. +45 87 40 00 00
Fax +45 87 40 00 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF