AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / Overview.fm / 03.06.2009 1 Gigaset AS180/AS185/AS280/AS285 The handset at a glance 1 Charge status of the batteries 2 Answer machine icon (AS185/AS285 only) 3 Display keys 4 Message key Flashes: new messages received 5 AS180/AS185: h Directory key AS280/AS285: d Handsfree key 6 Control key (u) 7 Talk key 8 AS280/AS285: h Directory key (press down) 9 End call and On/Off key 10 Ringer on/off (press and hold in idle status) 11 Keypad lock on/off (press and hold) 12 Recall key - Consultation call (flash) - Dialling pause (press and hold) 13 Microphone 14 "Microphone off" key Display keys on handset: Pressing a key launches the function that appears above that key in the display. 1 2 11.12. INT 3 4 5 6 7 8 9 5 7 4 AS180/AS280 base station 1 ¢ 1 Registration/paging key: page 10) Search for handsets (press briefly, "Paging" page 10). Register handsets (press and hold 2 On/Off key: activate and deactivate answer machine. Lights up: answer machine is activated. 3 Volume keys: (– = quieter; + = louder) During message playback: adjust the speaking volume. While phone is ringing: adjust ringer volume. 4 Play/Stop key: Play back messages from the answer machine, or cancel playback. Flashes: there is at least one new message or message is in the process of being recorded. Flashes very quickly: memory is full. During message playback: 5 Delete current message. 6 Skip to the start of the current message (press once) or go to the previous message (press twice). 7 Skip to next message. ¢ 1 3 11:56 MENU ¢ 13 14 AS185/AS285 base station 6 V 10 11 12 The base station at a glance 2 ± Display Function when pressed icon INT Call other registered handsets page 11. MENU Open main/submenu (see page 15). Menu tree Go back one menu level. “ Scroll up/down or adjust U volume with u. Move cursor to left/right T with u. Backspace deletes one charac˜ ter at a time from right to left. OK Confirm menu function or save entry. ¢ AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / Overview.fm / 03.06.2009 2 Safety precautions Read this user guide and the safety precautions carefully before use. Explain their content and the potential hazards associated with using the telephone to your children. $ Only use the mains adapter supplied. ¢ Fit only the recommended, rechargeable batteries ( page 12), i.e. never use any other battery type or non-rechargeable batteries as this could result in significant health risks and personal injury. The operation of medical appliances may be affected. Be aware of the technical conditions in your particular environment, e.g. doctor's surgery. Do not hold the rear of the handset to your ear when it is ringing. Otherwise you risk serious and permanent damage to your hearing. The handset may cause an unpleasant humming noise in hearing aids. Do not install the phone in a bathroom or shower room. The handset and base station are not splashproof. Do not use your phone in environments with a potential explosion hazard, e.g. paint shops. ƒ If you give your Gigaset to someone else, make sure you also give them the user guide. Please remove faulty base stations from use or have them repaired by our service, as they could interfere with other wireless services. Disposal Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of which can be obtained from your local authority or the dealer you purchased the product from. All electrical and electronic equipment must be disposed of separately from general household waste using the sites designated by local authorities. If a product displays this symbol of a crossed-out rubbish bin, the product is subject to European Directive 2002/96/EC. The appropriate disposal and separate collection of used equipment serve to prevent potential harm to the environment and to health. They are a precondition for the re-use and recycling of used electrical and electronic equipment. For further information on disposing of your used equipment, please contact your local authority, your refuse collection service or the dealer you purchased the product from. ¢ Emergency numbers cannot be dialled if the keypad lock ( page 1) is activated! Not all of the functions described in this user guide are available in all countries. Care Wipe down the base station and handset with a damp cloth (no solvents) or an antistatic cloth. Never use a dry cloth. This can cause static. Contact with liquid ! If the handset should come into contact with liquid: ◆ Switch the handset off and remove the batteries immediately. ◆ Allow the liquid to drain from the handset. ◆ Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc.). ◆ Do not switch on the handset again until it is completely dry. When it has fully dried out, you will normally be able to use it again. ECO DECT You are helping to protect the environment with your Gigaset AS180/AS185/AS280/AS285. Reduced energy consumption Your telephone has a power-saving adapter plug and uses less power. Reduced transmission power The transmission power of your telephone is reduced automatically: The handset's transmission power is reduced depending on the distance to the base station. The transmission power on the base station is reduced to virtually zero when only one handset is registered and the handset is in the base station. You can reduce the transmission power of the handset and base station even more by using Eco Mode/Eco Mode+ (see Menu tree page 17): ◆ Eco Mode: 80% transmission power reduction in standby mode and during a call (the range of the base station is reduced). ◆ Eco Mode+: 100% transmission power deactivation in standby mode (top left display icon ½). Press and hold the talk key c to check that the base station can be reached. You will hear the ringing tone if the base station can be reached. ¢ AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / starting.fm / 03.06.2009 3 First steps Check the pack contents ◆ ◆ ◆ ◆ ◆ ◆ ◆ one Gigaset AS180/AS185/AS280/AS285 base station, one mains adapter, one Gigaset AS18H/AS28H handset, one phone cord, two batteries, one battery cover, one user guide. If you have purchased a model with multiple handsets, the package should contain two batteries, a battery cover and a charging cradle with mains adapter for each additional handset. Setting up the base station and charging cradle (if included) The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5°C to +45°C. Set up the base station at a central location on a flat, non-slip surface in your house or apartment. ¤ Please note Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. page 17) is activated. The range is reduced when Eco Mode ( ¢ The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and polishes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out. You can also mount the base station and charging cradle on the wall. Please note: ◆ Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices. ◆ Protect your Gigaset from moisture, dust, corrosive liquids and vapours. Connecting the base station ¤ First connect the mains adapter 1. ¤ Then connect the telephone jack 2 and insert the cables into the cable ducts. Please note: ◆ The mains adapter must always be connected, as the phone will not operate without mains connection. ◆ Only use the mains adapter and phone cord supplied. Pin connections on telephone cables can vary. 2 1 1 1 AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / starting.fm / 03.06.2009 4 Connecting the charging cradle (if included) 2 1 ¤ Connect the flat plug from the power supply 1. ¤ Plug the mains adapter into the plug socket 2. 2 If you need to disconnect the plug from the charging cradle, press the release button 1 and disconnect the plug 2. 1 Setting up the handset for use The display is protected by a plastic film. Please remove the protective film! Inserting the batteries and closing the battery cover Warning Use only the rechargeable batteries ( page 12) recommended by Gigaset Communications GmbH*. Never use conventional (non-rechargeable) batteries, as this could result in significant health risks and damage to property. For example, the outer casing of the batteries could be destroyed or the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type. ¢ * Gigaset Communications GmbH is a licensee of the Siemens trademark. ¤ Insert the batteries the right way round. The polarity is indicated in/on the battery compartment. + – ¤ Slide the battery cover back into the main casing until it clicks into place. If you need to open the battery cover, for instance to replace the batteries, place your fingertip in the grooved area on the top of the cover and slide down. AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / starting.fm / 03.06.2009 5 Placing the handset in the base station and registering V Put into base MENU Before you can use the phone, you must first register the handset to the base station. ¤ Place the handset with the display facing up in the base station. V Registering V INT MENU The handset registers automatically. Registration can take up to 5 minutes. Do not remove the handset from the base station during this time. After successful registration, the idle screen is displayed. Charge status of the batteries: – = e V U (flat to full) – = flashes: batteries almost flat – e V U flashes: charging If you have purchased a model with multiple handsets, repeat the registration process for each individual handset. Handsets are assigned the lowest available internal number (1–4). If more than one handset is registered to the base station, the internal handset number appears in the top left of the display, e.g. 2. If the internal numbers 1–4 are already assigned to other devices, number 4 will be overwritten. Please note ◆ Each key press interrupts the automatic registration. ◆ If automatic registration does not work, the handset will have to be registered manually ( ¢ page 10). ◆ Only place the handset in the base station or charging cradle that is intended for it. Initial charging and discharging of the batteries The correct charge level can only be displayed if the batteries are first fully charged and discharged. 8h ¤ Place the handset in the base station or charging cradle for eight hours. ¤ Then remove the handset from the base station or charging cradle and do not replace it until the batteries are fully discharged. AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / starting.fm / 03.06.2009 6 Please note ◆ After the first battery charge and discharge you may replace your handset in the base station or charging cradle after every call. ◆ Always repeat the charging and discharging procedure if you remove the batteries from the handset and reinsert them. ◆ The batteries may warm up during charging. This is not dangerous. ◆ After a while, the charge capacity of the batteries will decrease for technical reasons. Setting the date and time Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be used. ¢ ¢ ¢ ¢ MENU Settings OK Date/Time OK Date: ~ (enter the day, month and year in 6-digit format) OK Time: ~ (enter hours and minutes in 4-digit format) OK (display message: Saved) a (press and hold to return to idle status) ¢ ¢ ¢ ¢ ¢ ¢ ¢ Please note When entering the time and date, you can move the position of an entry to the left or right by pressing the control button up or down. Display in idle status Once the phone is registered and the time set, the idle display is shown as in this example. If the answer machine is activated (AS185/AS285), the answer machine icon × will be displayed in the header. Your answer machine is set with a pre-recorded announcement. ± 11.12. V 11:56 INT MENU Activating/deactivating the handset Press and hold the end call key a to activate or deactivate the handset. If you place a deactivated handset in the base station or charging cradle, it will automatically activate. Your phone is now ready for use! If you have any questions about using your phone, please read the tips on troubleshooting page 13) or contact our Customer Care team page 13. ("Questions and answers" ¢ ¢ AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 7 Making calls Handsfree talking (AS280/AS285 only) Making external calls and ending calls To activate while dialling: Enter the number ~ and press the handsfree key d. External calls are calls using the public telephone network. ~ (Enter the phone number) c. The phone number is dialled. (Or you can first press and hold c [dial tone] and then enter the number.) During the call you can adjust the earpiece volume using t and set the volume with u. End the call/cancel dialling: Press the end call key a. You can automatically insert a network provider dialling code before any phone number (see Menu page 17). tree "Preselection" ¢ ¢ Accepting a call The handset indicates an incoming call by ringing and by a display on the screen. Press the talk key c to accept the call. When Auto Answer is activated (see Menu tree page 17), simply remove the handset from the base station/charging cradle. In idle status, use t to activate the menu for setting the call volume and use u to set the volume. ¢ Calling Line Identification When you receive a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory. Requirements: 1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen. 2 The caller has asked the network provider for his number to be identified (CLI). ® appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable appears if CLI has not been requested. Switch to mute You can mute your handset when making external calls. Your caller can no longer hear you. Press the "Microphone off" key m during the call to activate/deactivate the function. Switching between earpiece and handsfree mode: During a call and when listening to the answer machine (AS285 only), press the handsfree key d to activate or deactivate handsfree talking. During a call, use t to activate the menu for setting the handsfree volume and use u to set the volume. Using the directory and lists Directory To open the directory: press h. You can store up to 40 (AS180/AS185) or 80 (AS280/AS285) numbers (max. 32 digits) and associated names (max. 14 characters). page 12. Enter letters/characters ¢ Saving the first number in the directory h ¢ New Entry? ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter name) ¢ OK Storing a number in the directory h ¢ MENU ¢ New Entry ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter name) ¢ OK Selecting a directory entry Open the directory with h. You have the following options: ◆ Use u to scroll through the entries until the required name is selected. ◆ Enter the first character of the name and scroll to the entry with u, if required. Dialling with the directory h ¢ u (select entry) ¢ c Using other functions h ¢ u (select entry) ¢ MENU AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 8 The following functions can be selected with u: New Entry Save new phone number. Show Number Display the phone number. Use Number Edit or add to the number. Then dial or select other functions from the MENU. Edit Entry Edit selected entry. Delete Entry Delete selected entry. Send Entry Send a single entry to another page 8). handset ( Delete List Delete all directory entries. Send List Shortcut ¢ Last number redial list This list contains the ten last dialled numbers. Dialling from the last number redial list c (press briefly) ¢ u (select entry) ¢ c Managing entries in the last number redial list c (press briefly) ¢ u (select entry) ¢ MENU You can select the following settings: Use Number Edit or add to the number. Then dial or select other functions from the MENU. Send the complete list to page 8). another handset ( Copy to Dir. Copy an entry to the directory. For shortcuts, assign the current entry to a key. Delete Entry Delete selected entry. Delete List Delete all entries. ¢ Calls list/voicemail (network mailbox) list Using shortcut keys You can assign directory entries to the keys 0 and 2–9: h ¢ u (select entry) ¢ MENU ¢ Shortcut ¢ OK ¢ ~ (press the key you want to assign the entry to) To dial, press and hold the required shortcut key. Transferring the directory to another handset Requirements: ◆ The sending and receiving handsets must both be registered to the same base station. ◆ The other handset and the base station can send and receive directory entries. h ¢ u (select entry) ¢ MENU ¢ Send Entry / Send List ¢ OK ¢ ~ (enter the internal number of the receiving handset) ¢ OK An advisory tone sounds and the message key flashes as soon as a new entry appears in the calls list/voicemail list. A message appears in the display. When you press the f key, all the lists are displayed. If only one list contains new messages, this will be opened automatically. Please note: If calls are saved in the network mailbox, you will receive a message if the appropriate settings have been set (depending on your network provider). Calls list ¢ Precondition: CLIP ( page 7) Depending on the type of list set, the calls list conpage 17) tains ( ◆ answered calls ◆ missed calls ◆ calls recorded by the answer machine (AS185/ AS285 only) Depending on the type of list set, all numbers of the last 25 incoming calls are saved or just the missed calls are saved. The calls list is displayed as follows: ¢ CallsList 01+02 Number of new entries + number of old, read entries AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 9 Open the calls list f ¢ CallsList 01+02 ¢ OK The last incoming call is displayed. If necessary, use u to select another entry. Using other functions u (select entry) ¢ MENU The following functions can be selected with u: Delete Entry Delete current entry. Copy to Dir. Copy an entry to the directory. Date/Time Call date and time (if set). Status New Call: new missed call. Old Call: entry already read. Answ.: call taken. Delete List Warning! All old and new entries will be deleted. Calling back a caller from the calls list f ¢ CallsList 01+02 ¢ OK ¢ u (select entry) ¢c Voicemail list (AS185/AS285 only) You can use the voicemail list to listen to the messages that are on the answer machine. The voicemail list is displayed as follows: VoiceMail 01+02 Number of new messages + number of old, played back messages Opening the voicemail list f ¢ VoiceMail 01+02 ¢ OK If you have new messages, playback will start with the first new message, otherwise with the first old message. Using other functions u (select entry) ¢ MENU The following functions can be selected with u: Continue Resume paused playback. Volume Set the volume. Copy to Dir. Copy an entry to the directory. Delete all old Delete all old messages. Answer machine operation (AS185/AS285) The answer machine can be operated from the handset or by using the key on the base station page 1). ( The telephone is supplied with a pre-recorded announcement. You can only record your own announcement messages using the handset. This pre-recorded announcement is used if no personal announcement is available. If the memory is full, the answer machine switches itself off automatically. It activates again automatically when you delete old messages. ¢ Activating/deactivating the answer machine ¢ MENU Voice Mail OK (‰ = on) ¢ ¢ OK ¢ Answer Mach. When the answer machine is switched on, the ± icon appears in the display. Recording your own announcement ¢ ¢ OK ¢ Announcements ¢ OK ¢ OK ¢ Speak after OK ¢ OK MENU Voice Mail Rec announce ¢ You hear the ready tone (short tone). Now say your announcement (at least 3 seconds). Press OK to confirm or press a or ” to reject your recording. After recording, the announcement is played back for you to check. Please note: Recording ends automatically when the max. recording time of 170 seconds is reached or if there is a break in speaking of more than 2 seconds. Playing back or deleting announcements See Menu tree ¢ page 15. Playing/deleting messages Open the voicemail list to play back messages. Stopping and controlling playback During message playback: 2 t 2xt v 2xv Stop playback. Press 2 again to resume. Go to the start of the current message. Skip to the previous message. Skip to the next message. Go to the next message but one. AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 10 Deleting individual messages While playback is paused, press the ˜ display key. Deleting all old messages During playback or pause: The following keys are used for operation: A Go to the start of the current message. Press twice to go back to the previous message. Picking up a call from the answer machine B 3 0 You can still accept a call while the answer machine is recording the message by pressing c . Recording stops and you can speak to the caller. Activating the answer machine ~ (Enter your own number and allow the phone to MENU ¢ Delete all old ¢ OK (confirm the security prompt) Setting up the answer machine The answer machine has already been preset at the factory. Make individual settings using the handset. Details on how to set a delay time, after which the answer machine is to answer a call, as well as details on how to set the recording length and activate call screening during the recording, are availpage 15. able from the Menu tree ¢ Setting a different language You can change the language used for voice prompts and the pre-recorded announcement. MENU ¢ 4 3 9 2 1 (starts the procedure). Select the language: 0 (German), 1 (French), 2 (Italian). The display shows Saved. Assigning key 1 for fast access to the answer machine (network mailbox) Stop playback. Press again to resume. Skip to next message. delete current message. ring until you hear the message: "Please enter PIN") ~ enter system PIN ¢ Your answer machine is activated. It tells you how much memory time is left. The messages are now played back. The answer machine cannot be deactivated remotely. Locating a handset ("paging") You can locate your handset using the base station. ◆ Briefly press the registration/paging key on the page 1). base station ( ◆ All handsets will ring simultaneously ("paging"), even if the ringer tones are deactivated. End paging: briefly press the registration/paging page 1) or the key on the base station ( talk key c on a handset. ¢ ¢ Registering handsets You can register up to four handsets on your base station (Gigaset AS18H/AS28H) recommended). Simply press and hold key 1 on the handset and you will be connected directly to the answer machine (network mailbox). page 15. See Menu tree Please note: Each additional handset must be registered on the base station in order for it to work properly! Remote operation when on the move For automatic registration of handsets to page 5. Gigaset AS180/AS185/AS280/AS285 You can check and activate your answer machine from any other telephone (hotel, pay phone etc.). Manual registration of handsets to Gigaset AS180/ AS185/AS280/AS285 Requirements: ◆ You have set a system PIN other than 0000 page 17. ◆ The phone you are using for remote operation has touch tone dialling (DTMF), i.e. you hear different tones when you press the keys. 1. On the handset: MENU ¢ ¢ Calling the answer machine and playing back messages ~ (Dial your own number) ¢ while listening to your announcement: press the 9 key and enter the system PIN ¢ ¢ Settings ¢ OK ¢ Handset ¢ OK ¢ Register HS ¢ Enter the system PIN of the base station (default is 0000) ¢ OK. Registering flashes in the display. 2. On the base station: within 60 seconds of entering the system PIN, press and hold the regispage 1) (min. 3 seconds). tration/paging key ( Registration takes approx. 1 minute. ¢ AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 11 De-registering handsets Setting the alarm clock Handsets can only be de-registered by resetting the base station to its default settings. This will page 11. also reset other settings If you have only registered handsets for other GAPcompatible devices, these can only be de-regispage 11. tered with a hardware reset Activating/deactivating the alarm clock Using several handsets When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon l will appear on the screen and the wake-up time will be displayed instead of the date. ¢ ¢ Making internal calls Internal calls are free calls to other handsets that are registered to the same base station. To make a call to other handsets, press ¢ ¢ ~ (1...4, enter internal number of the handset), the handset is called or ◆ INT star key P, all handsets are called. When a participant answers you can speak to them. To end the call, press the end call key a. ◆ INT Internal consultation call/connecting a call You are in conversation with an external participant. Press the INT key and call one or all handsets. The external participant hears the hold music. ◆ Before the internal participant has answered, press the end call key a; the call is diverted to the participant who answers the call. ◆ After the internal participant has answered, you can talk to him. Press the end call key a; the call is diverted, or press the display key ”; you are reconnected to the external participant. ¢ MENU Alarm Clock OK (‰ = on) ¢ ¢ OK ¢ Activation When activated: ¢ Set the wake-up time ¢ OK Setting the wake-up time MENU ¢ Alarm Clock ¢ OK ¢ Wake-up time ¢ OK Enter the wake-up time in hours and minutes, then press OK. Phone settings For details on how to set audio settings, see Menu page 15. tree For details on how to set the system PIN on the page 17. base station, see the Menu tree ¢ ¢ Changing the display language ¢ ¢ ¢ ¢ ¢ ¢ MENU Settings OK Handset OK Language OK select the language ¢ The current language is indicated by ‰ . ¢ OK If you accidentally choose a language you do not understand: MENU ¢ 4 2 1 (press the keys one after the other) Select the correct language with u and press OK. Listening in to an external call Resetting the handset You are conducting an external call. An internal participant can listen in on this call and take part in the conversation (conference). Precondition: The Listening in function must be activated. You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's registration to the base station will be retained. Activating/deactivating listening in Cancel the reset with a. ¢ ¢ ¢ ¢ MENU Settings OK Base Listening in OK (‰ = on) ¢ ¢ OK Internal listening in (conference) You want to listen in to an existing external call. Press and hold the c key. You can listen in to the call. All participants hear a signal tone. To end: press the end call key a. All participants hear a signal tone. If the first internal participant presses the end call key a, the handset that has "listened in" remains connected to the external participant. ¢ MENU Settings Reset Handset ¢ ¢ OK ¢ Handset ¢ OK ¢ OK Restoring the base station to the factory settings When restoring factory settings: ◆ All handsets are de-registered ◆ Individual settings are reset ◆ All lists are deleted ◆ The system PIN is reset to the original code 0000 Only the date and time are retained. AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 12 Software reset ¢ ¢ ¢ Base ¢ OK ¢ MENU Settings OK Base Reset OK ¢ Hardware reset Disconnect the power cord from the base station. Hold down the registration/paging key page 1) on the base station while reconnect( ing the power cable to the base station. Release the key after approximately 5 seconds. ¢ Repeater mode With a repeater you can increase the range of your base station. You will need to activate repeater page 17). Repeater mode and Eco mode mode ( page 1) cancel each other out. or Eco mode+ ( ¢ ¢ Operating the base station on the PABX The following settings are only necessary if your PABX requires them, see the user guide for your PABX. When entering the digits, enter them slowly one after the other. Changing the dialling mode MENU ¢ 4 I O 1 1 ¢ The number for the set dialling mode flashes: 0 = touch tone dialling (DTMF); 1 = dial pulsing (DP) enter number OK. ¢ ¢ Setting recall MENU ¢ 4 I O 1 2 ¢ The number for the current recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; enter number OK. 7 = 800 ms ¢ ¢ Changing pause after line seizure You can set the length of the pause inserted between pressing the talk key c and sending the phone number. ¢ ¢ ¢ MENU 4IO1O The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec. enter number OK. ¢ Changing the pause after the recall key MENU ¢ 4 I O 1 4 ¢ The number for the current pause length flashes: 1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms enter number OK. ¢ ¢ Appendix Entering letters/characters Press the relevant key the number of times indicated. Briefly press the hash key # to switch from "Abc" to "123" mode, from "123" to "abc" mode and from "abc" to "Abc" mode. Standard characters 1 2 I 4 5 L M N O Q P # 1x 2x 1) 1 a b d e g h j k m n p q t u w x . , * / Abc --> 123 123 --> abc 3x £ c f i l o r v y ? ( # 4x $ 2 3 4 5 6 s 8 z ! ) @ 5x ¥ ä ë ï 6x 7x 8x 9x 10x 11x 12x 13x 14x ¤ á à â ã ç é è ê í ì î ö ñ ó ò ô 7 ß ü ú ù û 9 ÿ ý æ ø 0 + - : ¿ < = > % \ & § õ å ¡ " ’ ; _ 1) Space Specifications Recommended batteries Technology: Nickel-metal-hydride (NiMH) Size: AAA (Micro, HR03) Voltage: 1.2 V Capacity: 400–800 mAh We recommend the following types of battery: ◆ GP 550/700 mAh ◆ Yuasa Phone 700/800 mAh ◆ Peacebay 550/650 mAh (Valid at the time of going to press) The handset is supplied with recommended batteries. Base station power consumption In standby mode – Handset in base station – Handset outside base station During a call approx. 1.3 W approx. 1.3 W approx. 1.5 W General specifications DECT standard GAP standard Range Base station power supply Environmental conditions in operation is supported is supported up to 300 m outdoors up to 50 m indoors 230 V ~/50 Hz +5°C to +45°C, 20% to 75% relative humidity AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 13 Questions and answers Service (Customer Care) If you have any queries about the use of your telephone, visit our website at www.gigaset.com/customercare for 24-hour support. The table below contains a list of common problems and possible solutions. We offer you support that is fast and tailored to your specific needs! Our Online Support on the Internet can be reached any time from anywhere. www.gigaset.com/customercare It provides you with 24/7 support for all our products. It also provides a list of FAQs and answers plus user guides and current software updates (if available for the product) for you to download. You will also find frequently asked questions and answers in the detailed user guide on the enclosed CD or in the Internet at www.gigaset.com. For fast and dependable assistance with any repairs or guarantee/warranty claims, contact our Service Centre. Ireland 18 50 77 72 77 Please have your proof of purchase ready when calling. Replacement or repair services are not offered in countries where our product is not sold by authorised dealers. Problem Cause Solution Nothing The handset is not Press the end call appears in the switched on. key a for approx. display. 5 seconds or place the handset in the base station. The batteries are Charge or replace the batteries. flat. No wireless Move the handset The handset is connection to outside the range closer to the base the base sta- of the base stastation. tion, Base tion. flashes in the The handset is not Register the handset page 10. display. registered. The base station is Check the mains connector on the base not turned on. page 3. station You cannot The phone cord Please always use the hear a ringer/ supplied has not phone cord supplied dialling tone been used or has or ensure that the from the fixed been replaced by pin connections are line network. a new cord with correct when purchasing from a retailer: the wrong jack 3-4 assignment of connections. telephone leads/EURO CTR37. You have entered Reset the system PIN Error tone sounds after the wrong to the default 0000 page 11. system PIN system PIN. All handsets are deprompt. registered. All setPIN forgotten. tings are reset. All lists are deleted. ¢ ¢ ¢ Authorisation This device is intended for use with analogue telephone lines on the Irish network. This device is intended for use within the European Economic Area and Switzerland. If used in other countries, it must first be approved by the country in question. Country-specific conditions have been taken into consideration. Gigaset Communications GmbH declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/ EC. A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address: www.gigaset.com/docs. AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 14 Guarantee certificate Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturer’s Guarantee under the conditions set out below: ◆ In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Gigaset Communications shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In respect of parts subject to wear and tear (including but not limited to, batteries, keypads, casing), this warranty shall be valid for six months from the date of purchase. ◆ This Guarantee shall be invalid if the device defect is attributable to improper care or use and/or failure to comply with information contained in the user manuals. In particular claims under the Guarantee cannot be made if: ◆ The device is opened (this is classed as third party intervention) ◆ Repairs or other work done by persons not authorised by Gigaset Communications. ◆ Components on the printed circuit board are manipulated ◆ The software is manipulated ◆ Defects or damage caused by dropping, breaking, lightning or ingress of moisture. This also applies if defects or damage was caused by mechanical, chemical, radio interference or thermal factors (e.g.: microwave, sauna etc.) ◆ Devices fitted with accessories not authorised by Gigaset Communications ◆ This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves (e.g. installation, configuration, software downloads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee. ◆ The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident. ◆ Ownership of devices or components replaced by and returned to Gigaset Communications shall vest in Gigaset Communications. ◆ This Guarantee shall apply to new devices purchased in the European Union. For Products sold in the Republic of Ireland the Guarantee is issued by Gigaset Communications UK Limited, Faraday House, Sir William Siemens Square, Frimley, Camberley, Surrey, GU16 8QD. ◆ Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturer’s liability for death or personal injury resulting from its negligence. ◆ The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee. ◆ Insofar as no Guarantee default exists, Gigaset Communications reserves the right to charge the customer for replacement or repair. ◆ The above provisions does not imply a change in the burden of proof to the detriment of the customer. To invoke this Guarantee, please contact the Gigaset Communications helpdesk on 1850 777 277. This number is also to be found in the accompanying user guide. AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 15 Menu tree Your phone has an extensive range of features. These are offered in the form of menus. To select a function while the phone is in idle status, press MENU (open menu), use the t and v keys to scroll to the function you require and press OK to confirm. To return to idle status: press and hold the a key. 1 MENU ¢ 4 1 ¢ OK Alarm Clock 1-1 Activation Activating/deactivating the alarm clock 1-2 Wake-up time Input format: HHMM 2 As an alternative to selecting functions using the t and v buttons, you can also enter the digit combination that is in front of the function in the menu tree. For setting the time and date, for example: Audio Settings 2-1 Handset Volume 2-1 Handset Volume 2-2 Ringer Volume 2-3 Ringer Melody 2-4 Advis. Tones 2-5 Battery Low Can be set to one of 3 levels (AS180/AS185) 2-1-1 Earpiece Can be set to one of 3 levels (AS280/AS285) 2-1-2 Speaker Can be set to one of 5 levels (AS280/AS285) 5 levels + "crescendo" available 2-3-1 External Calls 10 ringer melodies available for external calls 2-3-2 Internal Calls 10 ringer melodies available for internal calls 2-3-3 Alarm Clock 10 ringer melodies available for alarm clock Activate/deactivate 2-5-1 Off 2-5-2 On Warning tone to indicate battery is almost flat: 2-5-3 During Call 3 Voice Mail 3-1 Set Key 1 (all devices) (Only devices with answer machine) 3-2 Answer Mach. 3-3 Call Screening 3-4 Announcements 3-1-1 Netw. Mailbx 3-1-2 Answer Mach. never always only during a call Assign key 1 with network mailbox and enter the network mailbox number (in idle status, press and hold key 1 to dial). Netw. Mailbx: your network provider's answer machine; must be requested separately. The network mailbox list can be displayed if your network provider supports this function and if key 1 has been assigned with the network mailbox. Assign key 1 with answer machine (in idle status, press and hold to dial). Activating/deactivating the answer machine 3-3-1 Handset You can use the loudspeaker on the handset to screen a message that is being recorded, (AS285 only). 3-3-2 Base You can use the loudspeaker on the base station to screen a message that is being recorded. 3-4-1 Rec announce ¢ page 9 3-4-2 Play announce Play your announcement 3-4-3 Del announce Delete your announcement AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 16 3-5 Message Length 3-6 Ring Delay 3-5-1 Maximum Do not limit the recording time for each call. 3-5-2 1 Minute Limit the recording time to 1 minute per call. 3-5-3 2 Minutes Limit the recording time to 2 minutes per call. 3-5-4 3 Minutes Limit the recording time to 3 minutes per call. 3-6-1 Immediately Call is answered immediately. 3-6-2 10 sec Call is answered after 10 seconds. 3-6-3 18 sec Call is answered after 18 seconds. 3-6-4 30 sec Call is answered after 30 seconds. 3-6-5 Auto If there are no new messages, the answer machine answers a call after 18 seconds. If new messages are present, the answer machine answers a call after just 10 seconds. AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 17 4 Settings 4-1 Date/Time 4-2 Handset 4-3 Base Enter date (DDMMYY format), then time (HHMM format) ¢ page 11 4-2-1 Language Set the display language 4-2-2 Auto Answer Automatically activate/deactivate auto answer 4-2-3 Register HS Manually register the handset 4-2-4 Reset Handset Reset the handset 4-3-1 Audio Settings (AS185/AS285 only) 4-3-2 Call list type ¢ page 10 ¢ page 11 4-3-1-1 Ringer Volume 5 level settings + "crescendo" + "off" 4-3-1-2 Ringer Melody 10 selectable melodies 4-3-2-1 Missed Calls 4-3-2-2 All Calls ¢ page 8 ¢ page 8 4-3-3 System PIN Change system PIN (default is 0000) 4-3-4 Base Reset Restore factory settings 4-3-5 Additional 4-3-6 Listening in 4-3-7 Preselection ¢ page 7 ¢ page 11 ¢ page 12 ¢ page 2 4-3-5-3 Eco Mode activate/deactivate ¢ page 2 Activate/deactivate the function ¢ page 11 4-3-5-1 Repeater activate/deactivate 4-3-5-2 Eco Mode+ activate/deactivate 4-3-7-1 Presel. Number Network provider dialling code, should be inserted automatically before the dialled phone number. 4-3-7-2 With Preselect First digits of the dialling codes, should be dialled with preselection. 4-3-7-3 Without Presel First digits of dialling codes, should be dialled without preselection. AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 18 AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 19 AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 20 AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 21 AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 22 AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 23 AS180-AS185 / IRL / A31008-M2002-V101-2-7619 / main.fm / 03.06.2009 24 A 3 1 0 0 8 - M2 0 0 2 - V 1 0 1 - 2 - 7 6 1 9 Issued by Gigaset Communications GmbH Schlavenhorst 66 D-46395 Bocholt Gigaset Communications GmbH is a trademark licensee of Siemens AG © Gigaset Communications GmbH 2009 All rights reserved. Subject to availability. Rights of modification reserved. www.gigaset.com This user guide is made from 100% recycled paper.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project