Space Heaters - bei AEG Haustechnik

Space Heaters - bei AEG Haustechnik
FOR SPECIALIZED TRADE AND PLANNERS
CONVINCING ANSWERS FOR
MODERN HOME COMFORT
PRODUCT
INFORMATION
2015
EXCERPT: SPACE HEATERS
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
SPACE HEATERS
INTRODUCTION
PERFECT IDEAS
FOR ROOM-BASED
TEMPERATURE
CONTROL
1.1
1.2
1.3
1.4
A fully-developed synthesis of modern design,
reliable technology and maximum economic
viability:
AEG’s space heaters are well-engineered,
complete heating systems for houses,
apartments and commercial ventures
featuring a charge mechanism controlled by
atmospheric conditions to deliver fully
automatic, energy-saving and pleasant heat
and comfort.
Our natural stone heaters provide particularly
attractive heating by combining high-quality
natural materials with innovative technology.
The benefits of the cost-effective AEG
space and natural stone heaters at a glance
• Ideal for people affected by allergies
• Dust, pollen and germs are not caught up
with the room air
• Healthy radiation heat as from tiled stoves
or the sun
• Sophisticated design
• Space-saving operation not requiring anywhere to store fuel
• Minimum maintenance required
Modern design, maximum comfort and potential savings too!
Because AEG’s natural stone heaters use
long-wave thermal radiation and not convection, you can reduce your room temperature by
around 2 °C compared with a convector heater
without losing that snug feeling. Use up to
15 % less energy, year in, year out.
1.5
TIP FOR
SAVING ENERGY
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
5,2
56
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
STORAGE HEATERS 60
NATURAL STONE HEATING 81
GLASS HEATING 85
DIRECT HEATERS 89
FAN HEATERS · HEATED CARPETS 101
INFRARED WALL-MOUNTED RADIATORS 105
ELECTRIC MIRROR HEATERS 107
WATER HEATERS
INFRARED SHORT-WAVE
RADIANT HEATERS 111
2.1
57
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
SPACE HEATERS
INTRODUCTION
1.1
1.2
1.3
USEFUL INFORMATION
ABOUT
ELECTRIC
STORAGE HEATERS
Why does heat have to be stored over
night?
For our electricity-generating power stations
to operate efficiently and cost-effectively, they
need to be delivering power as constantly as
possible. But the amount of power needed by
electricity customers varies a lot during the day.
For example, the highest demand for electricity comes at midday while demand during the
night is very low.
Since the charging of electric storage heaters is
controlled by the energy supplier’s ripple control receiver, units can be activated in periods
when loads are light to enable as constant as
possible a level of electricity production. For its
part the energy supplier charges special rates
for this „off-peak” electricity.
1.4
1.5
2.1
What should be observed
when connecting storage heaters?
You should start by calculating how much
heat you require to determine the rating and
number of units needed.
A five-wire cable is needed to connect each
electric storage heater to the heating circuit
and control circuit. It should have the
corresponding width for sub-distribution.
A cable must be fitted between the electric
storage heater and room thermostat to control
discharge. AEG Haustechnik also supplies
room temperature controllers which can be
fitted in the unit itself. There is then no need for
a cable to an external room thermostat.
Compatibility of charge controls
Most of the current AEG ELFAMATIC charge
controls are compatible with older AEG
ELFAMATIC charge controls and many units
from other manufacturers.
Electric storage heaters utilise the excess
capacity generated by power stations. This affordable economy tariff electricity is converted
into heat during the night. Consequently, the
approximately two million storage heaters
make an important contribution to greater
energy efficiency.
And if this power has its origins in renewable
sources – such as wind power generated at
night, or photovoltaic systems – then they also
contribute to a cleaner environment.
2.2
SAVING WITH
AFFORDABLE
ECONOMY TARIFFS
2.3
2.4
2.5
• Saving with affordable economy tariffs
• Operation without emissions
• Reliable and economical operation
• Ecologically sensible energy mix
German energy saving directive
EnEV 2009:
Not an all-out ban for night-storage heaters
2.6
3.1
3.2
3.3
3.4
4.1
ANNUAL HEAT
DEMAND IN
EXISTING BUILDINGS
4.2
4.3
4,4
kWh/(m2a)
W/m2
≥ 250
130 - 200
WSVO 1977
180 - 250
70 - 130
WSVO 1982
85 - 150
80 - 100
WSVO 1995 (KFW 70)
54 - 100
40 - 60
EnEV 2002 (KFW 60)
40 - 90
30 - 50
Low-energy house
55 - 70
25 - 40
3-litre-house
30
15 - 30
Passive house
15
10
Built prior to 1977
All data is without guarantee
5,1
5,2
Building
58
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
SPACE HEATERS
INTRODUCTION
The advanced AEG storage heater, combined
with the latest ELFAMATIC µ3000 charge
control system, enables energy savings of
up to 25 %. The investment pays for itself by
reducing energy costs (compared to a
30-year-old storage heater without charge
control system).
MODERNISATION OF
NIGHT STORAGE
HEATERS PAYS FOR
ITSELF THROUGH
ENERGY SAVINGS
In addition to the new AEG storage heater
with intelligent control via ELFAMATIC µ3000,
an investment in improved thermal insulation
is usually necessary. Thermal insulation in
accordance with WSVO 1995, with approx.
80 kWh/m², should be pursued by means of
suitable measures for windows, doors, roofs
and external walls. Such measures will ensure
futureproof heating.
1.1
1.2
1.3
1.4
1.5
ON-SITE
CONSUMPTION
In the future, innovative developments will
continue to raise the proportion of PVgenerated power consumed on site, which will
contribute to reduced energy costs.
2.1
2.2
2.3
1
2.4
1
s
ltaic
tovo
o
Ph
2.5
7
2.6
2
3.1
8
6
3.2
11
10
12
3
4
3.3
1
2
3
5
PV system
PV inverter
PV meter
with reversing block
4 Electricity meter
5 Electricity and
generation meter
6 Public grid
7 Power generation
with renewables
8 Conventional
power generation
9 Domestic power
10 Storage heaters
11 Natural stone heating
12 Hot water heat pump
3.4
4.1
4.2
4.3
9
4,4
5,1
59
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
STORAGE HEATERS STANDARD, FLAT, LOW-LINE DESIGN
AND WITH STATIC DISCHARGE
Area of use
1.1
• High-quality ceramic core material with
high thermal retention properties
• Easy-to-clean lint filter in air outlet grate
• Prepared for installation of booster heater
and integrable room temperature
controller
• Versatile unit variants in one design range –
the right unit for every room
• Electric storage heaters for conveniently
and cost-effectively heating homes and
commercial spaces
• During on periods the electric storage
heaters are charged at a low charge rate.
When required, the stored heat is given off
to the room via a tangential blower
1.2
1.3
Installation
Components
1.4
• Rapid installation using stainless steel
radiators fitted and prewired in the factory
• Large connection space with swivelmounted terminal strip
• Various installation variants available with
special accessories
• Elegant, contemporary unit design, white
in colour, RAL 9010
• Silent-Air-Flow air management system
for operation as quiet as a whisper and an
even output of heat
• Environmentally sound thermal insulation
based on mica slate, intermediate front
with high-quality microtherm thermal
insulation
1.5
Heating load calculation programme
• Programme for calculating approximate
thermal requirement following the HEA
short-cut method
• With electric storage heater design
• Quotation module with all AEG Haustechnik
units
• The HEA short-cut method is reliable for
advising on rough thermal demand and
does not apply to rooms/buildings covered
by EnEV
2.1
2.2
2.3
Tender documentation
• Tender documentation of all
AEG storage heaters and other
AEG Haustechnik products
• Format: Excel, Datanorm,
Supplied on CD-ROM,
Order by
Phone: +49 5531 702-0
Fax: +49 5531 702-95479
E-Mail: info@stiebel-eltron.com
Connection variants
• The connected load, which is wired in the
factory to 100 %, can be reduced by 3 power
levels by transferring or removing bridges on
the connection terminals
• This allows the connected load to be
adjusted to the heating capacity calculated
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
5,2
Connection variants for standard series
Power variants kW
Nominal charge time
8 hrs
Connection variants
100 %
WSP 2010
2.00
WSP 3010
3.00
WSP 4010
4.00
WSP 5010
5.00
WSP 6010
6.00
WSP 7010
7.00
Connection variants flat design
Power variants kW
Nominal charge time
Connection variants
WSP 1210 F
WSP 1810 F
WSP 2410 F
WSP 3010 F
WSP 3610 F
WSP 4210 F
WSP 4810 F
8 hrs
100 %
1.20
1.80
2.40
3.00
3.60
4.20
4.80
Connection variants Low-line design
Power variants kW
Nominal charge time
7 hrs
Connection variants
100 %
WSP 3510 N
3.50
WSP 5010 N
5.00
60
9 hrs
91.6 %
1.83
2.75
3.66
4.58
5.50
6.42
8 hrs radiator (series)
10 hrs
83.3 %
1.67
2.50
3.33
4.16
5.00
5.83
9 hrs
91.6 %
1.10
1.65
2.20
2.75
3.30
3.85
4.40
8 hrs radiator (series)
8 hrs
9 hrs
91.6 %
83.3 %
3.21
2.92
4.58
4.16
75 %
1.50
2.25
3.00
3.75
4.50
5.25
5 hrs
100 %
2.70
4.10
5.50
6.50
8.10
9.00
100 %
2.00
–
–
–
–
–
8 hrs radiator (series)
10 hrs
83.3 %
1.00
1.50
2.00
2.50
3.00
3.50
4.00
10 hrs
75 %
2.63
3.75
5 hrs
100 %
4.90
6.50
6 hrs radiator kit (special accessory)
6 hrs
7 hrs
91.6 %
83.3 %
2.74
2.25
3.75
3.42
5.04
4.58
5.96
5.42
7.42
6.75
8.24
7.50
75 %
0.90
1.35
1.80
2.25
2.70
3.15
3.60
6 hrs radiator kit (special accessory)
6 hrs
7 hrs
91.6 %
83.3 %
4.49
4.08
5.95
5.41
75 %
2.03
3.07
4.13
4.88
6.08
6.75
100 %
1.20
1.80
–
–
–
–
–
75 %
3.67
4.87
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
STORAGE HEATERS
STANDARD DESIGN
1.1
• Standard range of electric storage heaters
for universal use in domestic and commercial
areas
• With thermo-mechanical charge regulator
• Wide power range of 2 – 7 kW
• Preferably for installation on the floor.
Installation not on the floor possible with
special accessories
1.2
1.3
1.4
1.5
WSP 3010
2.1
2.2
2.3
2.4
2.5
Dimensions in mm
2.6
Model
WSP 2010
EAN
WSP 3010
WSP 4010
WSP 5010
WSP 6010
WSP 7010
40 41056 01267 4 40 41056 01268 1 40 41056 01269 8 40 41056 01270 4 40 41056 01271 1 40 41056 01272 8
E-Number
Housing EAN
Housing E-Number
Stone packages EAN
Stone packages E-Number
187 312
187 313
187 314
187 316
187 318
187 319
40 41056 00965 0
40 41056 00966 7
40 41056 00967 4
40 41056 00968 1
40 41056 00969 8
40 41056 00970 4
185 197
185 198
185 199
185 200
185 201
185 202
40 41056 00971 1
40 41056 00971 1
40 41056 00971 1
40 41056 00971 1
40 41056 00971 1
40 41056 00971 1
185 205
185 205
185 205
185 205
185 205
185 205
605
780
955
1130
1305
1480
Dimensions in mm
Width
B
Height
Depth + projection
Spacing
X
650
650
650
650
650
650
245 + 30
245 + 30
245 + 30
245 + 30
245 + 30
245 + 30
415
590
765
940
1115
1290
3.1
3.2
3.3
3.4
Technical Data
Power connection
50 Hz
V 3/N/PE~400
1/N/PE~230 50 Hz
3/N/PE~400 50 Hz
3/N/PE~400 50 Hz
3/N/PE~400 50 Hz
3/N/PE~400 50 Hz
3/N/PE~400 50 Hz
kW
2.0
3.0
4.0
5.0
6.0
7.0
Design charge
kWh
16.0
24.0
32.0
40.0
48.0
56.0
Max. charge PH:
kWh
17.0
25.5
35.0
42.0
51.0
61.5
Connected load *
Control resistor
KOhm
3.4
3.4
3.4
3.4
3.4
3.4
•
•
•
•
•
•
kW
0.35 / 0.5
0.5 / 0.8
0.8 / 1.0
1.0 / 1.2
1.2 / 1.5
1.5 / 1.7
kg
118
169
220
271
322
373
6 (12)
9 (18)
12 (24)
15 (30)
18 (36)
21 (42)
85
128
170
213
256
298
Booster heater (special accessory)
Rating of booster heater
Weight (with stones)
4.2
Thermo-mechanical Thermo-mechanical Thermo-mechanical Thermo-mechanical Thermo-mechanical Thermo-mechanical
charge regulator
charge regulator
charge regulator
charge regulator
charge regulator
charge regulator
Charge control system
4.1
4.3
4,4
Heat storage stone
Number of packages (stones)
Weight
kg
5,1
* The connected load to select for the unit depends on the heat requirement calculated and the nominal charge time and additional charge time specified by the EVU; switchable to kW
61
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
STORAGE HEATERS
FLAT DESIGN
1.1
• Storage heater in a slimline design, with only
21.8 cm depth, including wall clearance
• Particularly suitable for installations where
space is at a premium
• Universal electronic charger for AC and DC
connection
1.2
1.3
• 3 AC-controls may be selected
• Output spectrum from 1.2 to 4.8 kW
• For wall mounting or floorstanding, wall
mounting brackets are part of the standard
delivery
• SK10 support brackets are required for wall
mounting the WSP 4210 F and WSP 4810 F
1.4
1.5
WSP 2410 F
197
B
Entladung
21
Ladung
546
85
2.1
165
2.2
89
2.3
89
X
70
2.4
83
Ø 9 mm
2.5
Dimensions in mm
2.6
Model
3.1
WSP 1210 F
EAN
E-Number
187 336
Housing EAN
3.2
Housing E-Number
185 206
Stone packages EAN
WSP 3010 F
WSP 3610 F
WSP 4210 F
WSP 4810 F
187 337
187 338
187 339
187 340
187 341
187 342
185 207
185 208
185 209
185 210
185 211
185 212
40 41056 00979 7 40 41056 00979 7 40 41056 00979 7 40 41056 00979 7 40 41056 00979 7 40 41056 00979 7 40 41056 00979 7
185 214
185 214
185 214
185 214
185 214
185 214
185 214
1546
Dimensions in mm
Width
B
Height
3.4
WSP 2410 F
40 41056 00972 8 40 41056 00973 5 40 41056 00974 2 40 41056 00975 9 40 41056 00976 6 40 41056 00977 3 40 41056 00978 0
Stone packages E-Number
3.3
WSP 1810 F
40 41056 01275 9 40 41056 01276 6 40 41056 01277 3 40 41056 01278 0 40 41056 01279 7 40 41056 01280 3 40 41056 01281 0
Depth + projection
Spacing
X
580
741
902
1063
1224
1385
546
546
546
546
546
546
546
197 + 21
197 + 21
197 + 21
197 + 21
197 + 21
197 + 21
197 + 21
402
563
724
885
1046
1207
1368
Technical Data
4.1
Power connection
Connected load *
4.2
50 Hz 3/N/PE~400 50 Hz
V 3/N/PE~400
1/N/PE~230 50 Hz 1/N/PE~230 50 Hz 3/N/PE~400 50 Hz 3/N/PE~400 50 Hz 3/N/PE~400 50 Hz 3/N/PE~400 50 Hz 3/N/PE~400 50 Hz
kW
1.2
1.8
2.4
3.0
3.6
4.2
4.8
Design charge
kWh
9.6
14.4
19.2
24.0
28.8
33.6
38.4
Max. charge PH:
kWh
Charge control system
4.3
Control resistor
KOhm
Booster heater (special accessory)
4,4
Rating of booster heater
Weight (with stones)
10.8
16.2
20.7
25.9
31.3
38.8
43.8
Electronic AC/DC
charge controller
Electronic AC/DC
charge controller
Electronic AC/DC
charge controller
Electronic AC/DC
charge controller
Electronic AC/DC
charge controller
Electronic AC/DC
charge controller
Electronic AC/DC
charge controller
–
–
–
–
–
–
–
•
•
•
•
•
•
•
kW
0.35
0.5
0.8
1.0
1.2
1.5
1.7
kg
73.5
106
137.5
169
201
232.5
264.5
6 (12)
9 (18)
12 (24)
15 (30)
18 (36)
21 (42)
24 (48)
50
76
101
126
151
176
202
Heat storage stone
5,1
Number of packages (stones)
Weight
kg
* The connected load to select for the unit depends on the heat requirement calculated and the nominal charge time and additional charge time specified by the EVU; switchable to kW
5,2
62
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
STORAGE HEATERS
FLAT DESIGN DUOTHERM
1.1
• Duotherm dual circuit storage heaters for
“controlled electric heating” with
controllable storage component and nonstorage component (for areas served by
specific power utilities)
• Storage heater in a slimline design, with 21.8
cm depth, incl. wall clearance
• Particularly suitable for installations where
space is at a premium
• Universal electronic charger for AC and DC
connection
• 3 AC-controls may be selected
• Output spectrum from 1.2 to 3.6 kW
• For wall mounting or floorstanding, wall
mounting brackets are part of the standard
delivery
197
B
1.2
1.3
1.4
21
1.5
WSP 2410 F
Entladung
Ladung
546
85
ES 10 DF
165
2.1
89
89
X
2.2
70
83
2.3
Ø 9 mm
Dimensions in mm
2.4
2.5
Model
EAN
E-Number
Housing EAN
Housing E-Number
Stone packages EAN
Stone packages E-Number
ES 10 DF ¹) EAN
ES 10 DF ¹) E-Number
WSP 1210 F
WSP 1810 F
WSP 2410 F
WSP 3010 F
WSP 3610 F
40 41056 01275 9
40 41056 01276 6
40 41056 01277 3
40 41056 01278 0
40 41056 01279 7
187 336
187 337
187 338
187 339
187 340
40 41056 00972 8
40 41056 00973 5
40 41056 00974 2
40 41056 00975 9
40 41056 00976 6
185 206
185 207
185 208
185 209
185 210
40 41056 00979 7
40 41056 00979 7
40 41056 00979 7
40 41056 00979 7
40 41056 00979 7
185 214
185 214
185 214
185 214
185 214
40 41056 01002 1
40 41056 01002 1
40 41056 01002 1
40 41056 01002 1
40 41056 01002 1
185 238
185 238
185 238
185 238
185 238
2.6
3.1
3.2
Dimensions in mm
Width
B
Height
Depth + projection
Spacing
580
741
902
1063
1224
546
546
546
546
546
197 + 21
197 + 21
197 + 21
197 + 21
197 + 21
X
402
563
724
885
1046
V
3.3
3.4
Technical Data
Power connection
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
kW
Ps / Psf ²) 0.8 / 0.4
Ps / Psf ²) 1.2 / 0.6
Ps / Psf ²) 1.6 / 0.8
Ps / Psf ²) 2.0 / 1.0
Ps / Psf ²) 2.4 / 1.2
Design charge
kWh
9.6
14.4
19.2
24.0
28.8
Max. charge PH:
kWh
Connected load * Ps / Psf ²)
Charge control system
Control resistor
KOhm
Weight (with stones)
16.2
20.7
25.9
31.3
Electronic AC/DC
charge controller
Electronic AC/DC
charge controller
Electronic AC/DC
charge controller
Electronic AC/DC
charge controller
–
–
–
–
–
–
–
–
–
–
kW
–
–
–
–
–
kg
73.5
106
137.5
169
201
6 (12)
9 (18)
12 (24)
15 (30)
18 (36)
50
76
101
126
151
Booster heater (special accessory)
Rating of booster heater
10.8
Electronic AC/DC
charge controller
4.2
4.3
4,4
Heat storage stone
Number of packages (stones)
Weight
4.1
kg
5,1
* The connected load to select for the unit depends on the heat requirement calculated and the nominal charge time and additional charge time specified by the EVU; switchable to kW
¹) Auxiliary set
²)Ps / Psf = Storage / direct heating component
63
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
STORAGE HEATERS
LOW-LINE DESIGN
1.1
• Storage heater designed for very low height,
only 49 cm high
• Particularly suitable for installation in recesses
with low window sills
1.2
1.3
• Universal electronic charger for AC and DC
connection
• 3 AC-controls may be selected
• Floorstanding, off-floor installation possible
with special accessories
1.4
1.5
WSP 3510 N
245
B
2.1
Entladung
2.2
85
2.3
Ladung
490
165
95
2.4
X
95
80
130
2.5
Ø 9 mm
Dimensions in mm
2.6
3.1
Model
3.2
Housing EAN
EAN
E-Number
Housing E-Number
Stone packages EAN
3.3
Stone packages E-Number
WSP 3510 N
WSP 5010 N
40 41056 01282 7
40 41056 01283 4
187 323
187 326
40 41056 00980 3
40 41056 00981 0
185 203
185 204
40 41056 00971 1
40 41056 00971 1
185 205
185 205
1130
1480
Dimensions in mm
Width
3.4
B
Height
490
490
245 + 30
245 + 30
X
940
1290
V
3/N/PE~400 50 Hz
3/N/PE~400 50 Hz
Depth + projection
Spacing
4.1
Technical Data
Power connection
4.2
4.3
Connected load
kW
3.5
5.0
Design charge
kWh
24.0
35.0
Max. charge PH:
kWh
Charge control system
Control resistor
KOhm
Booster heater (special accessory)
4,4
Rating of booster heater
Weight (with stones)
28.0
40.0
Electronic AC/DC charge controller
Electronic AC/DC charge controller
–
–
•
•
kW
1.0
1.5
kg
188.5
259.0
10 (20)
14 (28)
142
199
Heat storage stone
5,1
Number of packages (stones)
Weight
kg
* The connected load to select for the unit depends on the heat requirement calculated and the nominal charge time and additional charge time specified by the EVU; switchable to kW
5,2
64
30
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
STORAGE HEATERS
WITH STATIC DISCHARGE
• Storage heater without fan,
with non-controllable (static) discharge
• For temperate heating in hallways and similar
• Storage heater in a slimline design, only
21.8 cm in depth, incl. wall clearance
1.1
• Universal electronic charger for AC and DC
connection
• 3 AC-controls may be selected
• For wall mounting or floorstanding, wall
mounting brackets are part of the standard
delivery
1.2
1.3
1.4
1.5
WSP 1510 S
197
741
21
2.1
Entladung
Ladung
2.2
546
2.3
85
2.4
165
2.5
89
563
89
2.6
70
83
Ø 9 mm
3.1
Dimensions in mm
3.2
Model
WSP 1510 S
EAN
3.3
40 41056 01284 1
E-Number
187 310
Housing EAN
3.4
40 41056 00982 7
Housing E-Number
185 213
Stone packages EAN
40 41056 00979 7
Stone packages E-Number
4.1
185 214
Technical Data
Power connection
Connected load
V
1/N/PE~230 50 Hz
kW
1.5
Design charge
kWh
12
Max. charge PH:
kWh
Charge control system
Control resistor
Weight (with stones)
16.2
4.3
Electronic AC/DC charge controller
KOhm
Booster heater (special accessory)
Rating of booster heater
4.2
–
–
kW
–
kg
106
4,4
Heat storage stone
Number of packages (stones)
Weight
5,1
9 (18)
kg
76
65
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
ACCESSORIES FOR STORAGE HEATERS STANDARD, FLAT AND LOW-LINE DESIGN
AND FOR STORAGE HEATER WITH STATIC DISCHARGE
RADIATOR SETS FOR CHARGE MODEL < 8 HRS
1.1
• Radiator set for installation in electric storage
heater for charge models < 8 hrs
1.2
• The radiators fitted in the units in the factory
must be replaced
1.3
1.4
HKS 6
1.5
Model
HKS 6/2.7
EAN
HKS 6/4.1
HKS 6/5.5
HKS 6/6.5
HKS 6/8.1
HKS 6/9.0
HKS 6/4.9 N
HKS 6/6.5 N
40 41056 00983 4 40 41056 00984 1 40 41056 00985 8 40 41056 00986 5 40 41056 00987 2 40 41056 00988 9 40 41056 00989 6 40 41056 00990 2
E-Number
for WSP
185 266
185 267
185 268
185 269
185 270
185 271
185 272
185 273
WSP 2010
WSP 3010
WSP 4010
WSP 5010
WSP 6010
WSP 7010
WSP 3510 N
WSP 5010 N
BOOSTER HEATER
2.1
• Booster heaters for retrofitting in the air
outlet area of the electric storage heater.
If the thermal requirement increases, allows
for additional heating outside the on periods
• With 2 contact thermostats
With ON/OFF switch for fitting in the side
2.2
part of the electric storage heater provided
for this purpose
• Complete with affixing and wiring material
• Can be retrofitted to all storage heaters from
October 2005
2.3
2.4
ZH 1004
2.5
Model
EAN
2.6
E-Number
for WSP
Rating
kW
ZH 1004
ZH 2005
ZH 1005
ZH 3008
ZH 1008
ZH 4010
ZH 1010
40 41056 00991 9
40 41056 01505 7
40 41056 00992 6
40 41056 00992 6
40 41056 00993 3
40 41056 01507 1
40 41056 00994 0
185 259
187 787
185 260
187 788
185 261
187 789
185 262
WSP 2010, 1210 F
WSP 2010
WSP 3010, 1810 F
WSP 3010
WSP 4010, 2410 F
WSP 4010
WSP 5010, 3010 F, 3510 N
0.35
0.5
0.5
0.8
0.8
1.0
1.0
3.1
Model
3.2
ZH 5012
EAN
E-Number
for WSP
3.3
Rating
ZH 1012
ZH 1112
ZH 6115
ZH 1015
ZH 7017
ZH 1015 F
kW
187 790
185 263
220 901
221 043
185 264
187 792
185 328
185 265
WSP 5010
WSP 3610 F
WSP 6010
WSP 6010
WSP 7010, 5010 N
WSP 7010
WSP 4210 F
WSP 4810
1.2
1.2
1.2
1.5
1.5
1.7
1.5
1.7
3.4
INTEGRABLE, ELECTRONIC PROPORTIONAL
ROOM TEMPERATURE CONTROLLER
4.1
• Integrable, electronic speed regulator for
fitting in the electric storage heater‘s switch
area
• For particularly quiet and convenient electric
storage heater operation using temperaturecontrolled fan speed regulation
• Allows the room temperature to be set on
the electric storage heater itself – no laborious laying of cables and installation of a
room thermostat in a distant location
4.2
4.3
RTi 103 EP
4,4
Model
5,1
EAN
E-Number
for WSP
5,2
66
ZH 1017
40 41056 01508 8 40 41056 00995 7 40 41056 02145 4 40 41056 02146 1 40 41056 00996 4 40 41056 01510 1 40 41056 01010 6 40 41056 00997 1
• With ON/OFF switch and temperature selector for fitting in the side part of the electric
storage heater provided for this purpose
• Control power 100 VA
• Night-time reduction of around 4K possible
using timer
• Can also be used in conjunction with tiled
cladding
RTi 103 EP
40 41056 01001 4
185 237
WSP 1210 F/DF - WSP 4810 F/DF, WSP 3510 N, WSP 5010 N
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
ACCESSORIES FOR STORAGE HEATERS STANDARD, FLAT AND LOW-LINE DESIGN
AND FOR STORAGE HEATER WITH STATIC DISCHARGE
INTEGRABLE, ELECTRONIC 2-POINT
ROOM TEMPERATURE CONTROLLER
• Integrable, electronic 2-point regulator for
fitting in the electric storage heater‘s switch
area
• Thermal feedback for slight switching difference ± 1 K
• Allows the room temperature to be set on
the electric storage heater itself – no laborious laying of cables and installation of a
room thermostat in a distant location
1.1
• With ON/OFF switch and temperature selector for fitting in the side part of the electric
storage heater provided for this purpose
• Night-time reduction of around 4K possible
using timer
• Can also be used in conjunction with tiled
cladding
1.2
1.3
RTi 102 E
Model
1.4
1.5
RTi 102 E
EAN
40 41056 01000 7
E-Number
185 236
for WSP
WSP 1210 F/DF - WSP 4810 F/DF, WSP 3510 N, WSP 5010 N
INTEGRABLE, MECHANICAL 2-POINT
ROOM TEMPERATURE CONTROLLER
2.1
• Integrable, mechanical 2-point regulator for
fitting in the electric storage heater‘s switch
area
• Thermal feedback for slight switching difference
• Allows the room temperature to be set on
the electric storage heater itself – no labori-
2.2
ous laying of cables and installation of a
room thermostat in a distant location
• With ON/OFF switch and temperature selector for fitting in the side part of the electric
storage heater provided for this purpose
• Can also be used in conjunction with tiled
cladding
2.3
2.4
RTi 100 M
2.5
Model
RTi 100 M
EAN
40 41056 00998 8
E-Number
2.6
185 235
for WSP
WSP 2010 - WSP 7010
3.1
3.2
3.3
3.4
FLOOR BRACKETS
• 2 floor brackets for installing the electric storage heater off of the floor (100 mm)
4.1
• With tilt adjustment so can also be adapted
to uneven floors
4.2
4.3
BK 10
4,4
Model
EAN
E-Number
for WSP
BK 10
BK 11
40 41056 01006 9
40 41056 01005 2
185 242
185 241
WSP 2010 - WSP 7010, WSP 3510 N, WSP 5010 N
WSP 1210 F/DF - WSP 4810 F/DF, WSP 1510 S
5,1
67
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
ACCESSORIES FOR STORAGE HEATERS STANDARD, FLAT AND LOW-LINE DESIGN
AND FOR STORAGE HEATER WITH STATIC DISCHARGE
SUPPORT BRACKETS
1.1
• 2 pce support brackets for off-floor (100 mm)
installation of storage heaters where walls are
non-load bearing
1.2
• Required for wall mounting the WSP 4210 F
and WSP 4810 F
1.3
1.4
1.5
SK 10
Model
SK 10
EAN
40 41056 01004 5
E-Number
185 240
for WSP
WSP 1210 F/DF - WSP 4810 F/DF, WSP 1510 S
THERMAL RELAYS
2.1
• Thermal relay for direct release of power in
electric storage heater (control cable for EVU
release is guided directly into the electric
storage heater)
2.2
• Installation in electric storage heater‘s switch
area
2.3
TS 10
2.4
2.5
Model
TS 10
EAN
40 41056 01003 8
E-Number
2.6
185 239
for WSP
WSP 2010 - WSP 7010
3.1
3.2
3.3
3.4
CONTROL RESISTOR
4.1
• Control resistor 40 % ED
• 1700 ohms of resistance
• For use in electric storage heaters in old
setups
4.2
SW 40 ED
4.3
4,4
Model
5,1
EAN
E-Number
for WSP
5,2
68
SW 40 ED
40 41056 01938 3
220 422
WSP 2010 - WSP 7010
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
STORAGE HEATER
HIGH-LINE DESIGN
Area of use
• Electric storage heaters for conveniently
and cost-effectively heating homes and
commercial spaces
• During on periods the electric storage
heaters are charged at a low charge rate.
When required, the stored heat is given off
to the room via a tangential blower
Components
• Elegant, contemporary unit design,
white in colour, RAL 9010
• High grade hard shell thermal insulation
• High-quality ceramic core material with
high thermal retention properties
• Prepared for installation of booster heater
and integrable room temperature
controller
• Retractable selector
1.1
1.2
TÜV Rheinland
geprüfte
Sicherheit
Installation
1.3
• Large connection space
• Rapid installation using stainless steel
radiators fitted and prewired in the factory
• Various loads can be connected
1.4
1.5
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
69
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
STORAGE HEATER
HIGH-LINE DESIGN
HIGH-LINE DESIGN
1.1
• High-line storage heater
• High heating output on a small footprint
1.2
• Particularly suitable for installations where
space is at a premium
1.3
1.4
1.5
WSP 600 HF
670
350
2.1
1056
2.3
930
2.2
2.4
2.5
70
85
2.6
3.1
Dimensions in mm
3.2
Model
3.3
WSP 600 HF
EAN
40 41056 01679 5
E-Number
189 841
Housing EAN
3.4
40 41056 01623 8
Housing E-Number
189 702
Cover stone sets EAN
40 41056 01624 5
Cover stone sets E-Number
4.1
189 703
Duct stone set EAN
40 41056 01625 2
Duct stone set E-Number
4.2
Power connection
Connected load (switchable) *
4.3
Design charge
kWh
Rating of booster heater
3/N/PE~400 50 Hz
6.0 (5.0 / 4.0)
48
Thermo-mechanical charge regulator
kOhm
3.6
kW
1.0
kg
330.00
Booster heater (special accessory)
Weight (with stones)
5,1
V
kW
Charge control system
Control resistor
4,4
189 704
Technical Data
•
Heat storage stone
Number of packages
3+6
* The connected load to select for the unit depends on the heat requirement calculated and the nominal charge time and additional charge time specified by the EVU; switchable to kW
5,2
70
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
ACCESSORIES FOR STORAGE HEATER
HIGH-LINE DESIGN
INTEGRABLE, ELECTRONIC PROPORTIONAL
ROOM TEMPERATURE CONTROLLER
• Integrable, electronic speed regulator for
fitting in the electric storage heater‘s switch
area
• For particularly quiet and convenient electric
storage heater operation using temperaturecontrolled fan speed regulation
1.1
• Allows the room temperature to be set on
the electric storage heater itself – no
laborious laying of cables and installation of
a room thermostat in a distant location
• With ON/OFF switch and temperature
selector for fitting in the housing of the
electric storage heater provided for this
purpose
1.2
1.3
1.4
RTi 600 EP HF
Model
1.5
RTi 600 EP HF
EAN
40 41056 01628 3
E-Number
189 707
Description
Proportional controller
BOOSTER HEATER FOR WSP 600 HF
• Booster heater for fitting in the
electric storage heater WSP 600 HF
• If the thermal requirement increases, allows
for additional heating outside the on periods
2.1
• Complete kit with contact thermostat, wiring
and affixing material
• Rating 1.0 kW
• Use only in conjunction with a suitable internal or external room temperature controller
2.2
2.3
2.4
ZH 600 HF
Model
EAN
2.5
ZH 600 HF
40 41056 01626 9
E-Number
189 705
Description
Booster heater
2.6
3.1
3.2
3.3
3.4
CONTROL RESISTOR
• Control resistor 40 % ED
• 1800 ohms of resistance
• For fitting in the switch aerea of the electric
storage heater WSP 600 HF
4.1
• For use of the electric storage heater in old
setups
4.2
4.3
SW 40 HF
4,4
Model
EAN
SW 40 HF
40 41056 01717 4
E-Number
189 875
Description
Control resistor 40 % ED
5,1
71
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
STORAGE HEATER FOR THE KITCHEN
1.1
1.2
TÜV Rheinland
1.3
geprüfte
Sicherheit
Area of use
Installation
• Storage heater specially designed for use
in kitchens
• During on periods the electric storage
heaters are charged at a low charge rate.
When required, the stored heat is given off
to the room via a blower
• For integration in a standard kitchen unit
space
• Supplementary set available for freestanding installations (special accessory)
Components
1.4
• Housing colour white, similar to RAL 9016
• Integral room temperature controller with
retractable selectors
• High grade hard shell thermal insulation
• High-quality ceramic core material with
high thermal retention properties
• Prepared for installation of booster heater
1.5
2.1
Integration in a standard kitchen unit space
2.2
450
2.3
820
2.4
570
Dimensions in mm
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
5,2
72
Integration in a standard kitchen unit space
This storage heater is designed specifically for
installation below the kitchen worktop.
The installed height is set to 82 cm at factory;
this can be adjusted to between 81.5 and
84.0 cm
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
STORAGE HEATER FOR THE KITCHEN
ELECTRIC STORAGE HEATER FOR THE KITCHEN
• Standard kitchen unit dimensions, only 45 cm
wide
• Perfect for small kitchens. Can be integrated
into a standard kitchen unit space – no additional space required for a heating system
1.1
• ES 300 H supplementary set is required for a
freestanding installation (P. 74)
• Optimum heat transfer and operation –
heater is not covered by kitchen furniture
• Weather-compensated charging is possible
1.2
1.3
1.4
1.5
WSP 300 H
Image with supplementary set ES 300 H
(see accessory p. 74)
600
450
2.1
570
30
30
445
110
2.2
20
2.3
570
2.4
105
12
175
2.5
2.6
30
Dimensions in mm
25
25
68
Model
3.1
3.2
WSP 300 H
EAN
40 41056 01579 8
E-Number
189 811
Casing with heating element EAN
3.3
40 41056 01564 4
Casing with heating element E-Number
Stone packages EAN
189 637
40 41056 01565 1
Stone packages E-Number
3.4
189 638
Dimensions in mm
Width
445
Height
820 ¹), 850 ²)
Depth
570 / 600 3)
4.1
Technical Data
Power connection
Connected load
Design charge
V
kW
3.0
kWh
24.0
Charge control system
Rating of booster heater
4.2
3/N/PE~400 50 Hz
4.3
Electronic charge controller 230 V, AC, only 80 % ED (digital)
kW
0.5
kg
201.0
Weight (with stones)
4,4
Heat storage stone
Number of packages (stones)
8
5,1
¹) Height-adjustable from 815 to 840 mm
²) Freestanding with worktop ES 300 H
3)
With sheet steel front panel
73
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
ACCESSORIES FOR THE STORAGE HEATER FOR THE KITCHEN
SUPPLEMENTARY SET FOR WSP 300 H
1.1
• Supplementary set for freestanding installation of the WSP 300 H
1.2
• Complete kit with worktop, sheet steel front
panel, white stove enamelled, l.h. and r.h.
cover, connection strip and fixing materials
1.3
1.4
1.5
ES 300 H
Model
ES 300 H
EAN
40 41056 01566 8
E-Number
189 639
Description
Supplementary set
BOOSTER HEATER FOR WSP 300 H
• Booster heater for WSP 300 H
• If the thermal requirement increases, allows
for additional heating outside the on periods
2.1
2.2
ZH 300 H
2.3
Model
2.4
EAN
E-Number
189 640
Description
Booster heater
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
5,2
ZH 300 H
40 41056 01567 5
74
• Complete kit with contact thermostat, wiring
and affixing material
• Rating 0.5 kW
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
ELFAMATIC CHARGE CONTROLS
Area of use
Installation
• Electronic charge controls for fully automatic charging of electric storage heaters
controlled by atmospheric conditions
• For top hat rail assembly for installing in
sub-distribution
1.1
1.2
Components
1.3
• Charge controls for forward, reverse and
spread supervision
• Satisfies all EVU requirements
• Supplied complete with atmospheric
conditions sensor
1.4
1.5
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
75
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
ELFAMATIC CHARGE CONTROLS
CHARGE CONTROL ELFAMATIC µC 3000
1.1
• Satisfies all EVU requirements
• Large illuminated LC-Display with
4 operating keys
• Automatic time synchronisation
• Control power 300 W
• Easy to set using stored charge models
• Integrated test program
1.2
1.3
1.4
• Compatible with all common atmospheric
condition sensors
• Characteristics curve can be easily moved
+/- 4K by the user
• For top hat rail assembly,
width: 6 modular spacings
ELFAMATIC μC 3000
1.5
CHARGE CONTROL ELFAMATIC V 3000
• Electronic charge control for all supply areas
with forward monitoring
• For top hat rail assembly,
width: 3 modular spacings
ELFAMATIC V 3000
2.1
2.2
2.3
GROUP CONTROL UNIT ELFAMATIC G 3000
2.4
• Digital group control unit for individual
control over several apartments
• Individual modification of charge level of
between +12 % and -36 % compared with
level specified by central control unit
2.5
• For top hat rail assembly,
width: 3 modular spacings
ELFAMATIC G 3000
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
Model
5,1
5,2
ELFAMATIC μC 3000
ELFAMATIC V 3000
ELFAMATIC G 3000
40 41056 01553 8
40 41056 01551 4
40 41056 01552 1
E-Number
187 869
187 870
187 871
Description
Central control unit
Central control unit
Group control unit
EAN
76
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
ROOM TEMPERATURE CONTROLLERS FOR HOT WATER STORAGE HEATER SYSTEMS
Area of use
• Room temperature controller for regulating
the output of heat from electric storage
heaters
Components
• The AEG room temperature controllers are
available in various variants: With ON/OFF
switch, with switch for booster heater, as
2-point controller or proportional controller
• New range in modern, attractive design
Installation
• For surface-mounted installation (RT 600,
RT 601 SN, RT 602 SNSZ)
• Fixing holes fit on the threaded bushes of
Ø 55 mm flushmounted sockets such that
the socket can be used as an extra
clamping space
• For flush-mounted installation (RT 5050,
RT 5050 SN, RT 5050 SZ)
• Wireless room temperature controller RTF
for easy installation with surface-mounted
or flush-mounted receiver (RTF-D, RTF-A,
RTF-E AP und RTF-E UP)
1.1
1.2
1.3
1.4
1.5
Benefits of electronic proportional
controllers
• Electronic proportional controllers regulate
the fan speed in a continuously variable
manner Compared with a 2-point controller
which either switches the fan on or off the
benefits are the low level of air movement
and the fact that room temperature remains
constant at all times
• There is also less fan noise as the fan only
rarely runs at maximum speed
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
77
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
ROOM TEMPERATURE CONTROLLERS FOR HOT WATER STORAGE HEATER SYSTEMS
ELECTRONIC PROPORTIONAL CONTROLLER
1.1
• Electronic continuously variable regulation of
blower speed – for low level of air movement
and a constant room temperature with little
fan noise
• Temperature set to around 5 - 30 °C
• Temperature can be reduced by 3K using
timer
1.2
1.3
1.4
• Modern, functional design, in pure white
• With adjustable restriction of range
• With 1-pin mains switch
RTE 603 SN
1.5
2-POINT CONTROLLERS WITH THERMAL FEEDBACK
• Thermal feedback for high control accuracy
and low switching hysteresis
• Temperature set to around 5 - 30 °C
• Temperature can be reduced using timer
• Modern, functional design,
color: pure white
• With adjustable restriction of range
• With 1-pin mains switch
• Thermal feedback for high control accuracy
and low switching hysteresis
• Temperature set to around 5 - 30 °C
• Temperature can be reduced using timer
• Modern, functional design,
color: pure white
• With adjustable restriction of range
• With 1-pin mains switch
• Thermal feedback for high control accuracy
and low switching hysteresis
• Temperature set to around 5 - 30 °C
• Temperature can be reduced using timer
• Modern, functional design,
color: pure white
• With adjustable restriction of range
• Thermal feedback for high control accuracy
and low switching hysteresis
• Temperature set to around 5 - 30 °C
• Temperature can be reduced using timer
• Modern, functional design,
color: pure white
• With adjustable restriction of range
• With 1-pin mains switch
RT 602 SNSZ
2.1
2.2
2.3
2.4
RT 601 SN
2.5
2.6
3.1
RT 600
3.2
3.3
3.4
4.1
RT 5050 SN
4.2
4.3
Model
EAN
RTE 603 SN
RT 602 SN SZ
RT 601 SN
RT 600
RT 5050 SZ
RT 5050 SN
RT 5050
40 41056 02400 4
40 41056 02399 1
40 41056 01552 1
40 41056 02397 7
40 41056 02404 2
40 41056 02403 5
40 41056 02402 8
4,4
E-Number
223 300
223 299
223 298
223 297
223 304
223 303
223 302
Installation
surface-mounted
surface-mounted
surface-mounted
surface-mounted
flush-mounted
flush-mounted
flush-mounted
5,1
Switching current/cap.
Connected load
Switch for
5,2
78
VA
A/W
10 - 100
–
–
–
–
–
–
–
10/2300
10/2300
16/3600
10/2300
10/2300
10/2300
Mains
Mains, booster
heater
Mains
–
Booster heater
Mains
–
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
ROOM TEMPERATURE CONTROLLERS FOR HOT WATER STORAGE HEATER SYSTEMS
WIRELESS ROOM TEMPERATURE CONTROLLER
RTF-D – NEW –
• Wireless room temperature controller with
weekly program and digital display
• Convenient control of heating system without laborious cabling
• Easy and intuitive to program
• 5 operating modes available
• Can be used as the master in master/slave
operations (pilot control)
• Wireless range inside buildings approx. 25 m
1.1
• Temperature can be set to between 5 °C and
30 °C
• May be used for mounting on finished walls
or as hand-held transmitter
• Power supply 3 x Micro AAA 1.5 V, part of
the standard delivery (3rd battery for backlit
display)
• Protection class III, Type of protection IP 30
• Dimensions: 110 x 26 x 110,7 mm,
Color: pure white, similar to RAL 9010
1.2
1.3
RTF-D
1.4
1.5
WIRELESS ROOM TEMPERATURE CONTROLLER
RTF-A – NEW –
• Wireless room temperature controller with
set value adjuster
• Convenient control of heating system without laborious cabling
• 2 operating modes available
• Wireless range inside buildings approx. 25 m
• Temperature adjustment from 5 to 30 °C
• May be used for mounting on finished walls
or as hand-held transmitter
• Power supply 2 x Micro AAA 1.5 V, part of the
standard delivery
• Protection class III, Type of protection IP 30
• Dimensions: 78,3 x 25,5 x 83,4 mm,
Color: pure white, similar to RAL 9010
RTF-A
2.1
FLUSH-MOUNTED RECEIVER
RTF-E UP – NEW –
• Receiver for mounting on unfinished walls
with integral strain relief for permanently
connecting a storage heater, glass or natural
stone heater
• Self-learn key for easily establishing the wireless connection
• Reliable wireless transfer at 868 MHz
• LED to indicate the current state
• Emergency mode in the case of permanently
interrupted wireless connection
• IP 30 protection, safety category II, for
consumers in safety category I and II
• Maximum switching current 11 A, from 30 °C
ambient temperature, 7.5 A
• Dimensions: 81 x 42,5 x 85 mm,
Color: pure white, similar to RAL 9010
2.2
2.3
RTF-E UP
2.4
2.5
SURFACE-MOUNTED RECEIVER
RTF-E AP – NEW –
• Receiver for mounting on unfinished walls
with integral strain relief for permanently
connecting a storage heater, glass or natural
stone heater
• Self-learn key for easily establishing the wireless connection
• Reliable wireless transfer at 868 MHz
• LED to indicate the current state
• Emergency mode in the case of permanently
interrupted wireless connection
• IP 30 protection, safety category II, for
consumers in safety category I and II
• Maximum switching current 13 A
• Dimensions: 78,3 x 25,5 x 83,4 mm,
Color: pure white, similar to RAL 9010
2.6
3.1
3.2
RTF-E AP
3.3
3.4
4.1
4.2
4.3
Model
EAN
RTF-D
RTF-A
RTF-E UP
RTF-E AP
40 41056 03035 7
4,4
40 41056 03032 6
40 41056 03033 3
40 41056 03034 0
E-Number
233 862
233 863
233 864
233 865
Description
Wireless room temperature
controller with weekly program
Wwireless room temperature
controller
Wireless receiver, flush-mounted
Wireless receiver, surface-mounted
79
5,1
5,2
WATER HEATERS
1.1
1.2
1.3
1.4
1.5
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
5,2
80
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
NATURAL STONE HEATING
Area of use
• The Natural stone heating: an attractive
heating system in a choice design
• May be used as partial storage heater,
using economy tariffs offered by various
power supply utilities
• As the sole source of heating for modern
low-energy buildings
• As additional heating for bathrooms, living
rooms, offices and much more.
Components
• Cosy output of radiation heat as with a tiled
stove, even, healthy distribution of heat
throughout room
• Space-saving heating system, depth with
projection of just 7 cm
• 8 quality types of stone from all over the
world, each
• Natural stone heating is unique
• Low heating conductor loading,
2 integrated temperature sensors in each
radiator
• Can be used as partial storage heating,
exploits special rates of different energy
suppliers
• No wear or maintenance
• Convenient temperature regulation using
wireless room temperature controller
(special accessory)
• 5 - 6 power variants for each stone type –
the right unit for every room
1.1
1.2
1.3
Installation
1.4
• For vertical or horizontal wall mounting
• Permanent connection, invisible electric
connection behind panel,
1.3 m long connection cable
• If using wireless room temperature controller, just one socket is needed for operation
1.5
The stones in AEG Natural stone heatings have developed over millions of years
through natural processes. The slabs are
natural products and are broken down into
stone fragments in a lengthy process. Every
heater is unique. Something which is documented by the different colours and patterns
on each heater. These are not defects
2.1
Convection heaters mainly emit heat to the
ambient air. This form of heating produces air
movement (convection) which gradually heats
the room.
Special shapes with
AEG Natural stone heatings
In order to satisfy individual design requests,
AEG Haustechnik provides the following
services for Natural stone heatings:
3. Window sill service
Window sills, worktops or floor tiles can also
be produced from the same type of stone to
match the Natural stone heating.
°C
2.2
2.3
2.4
2.5
Heat radiation
2.6
3.1
20
3.2
3.3
27
3.4
°C
4.1
Convection heat
4. Engraving service
On request, the Natural stone heatings can
also be supplied with individual engravings
such as writing or company logos.
4.2
17
1300
4.3
mm
4,4
100 mm
2. Individual types of stone
If requested by the customer, AEG Haustechnik
can also produce heaters from other suitable
types of stone.
22
AEG Haustechnik is happy to assist and
will gladly produce a complete quotation,
please call +49 5531 702-0
What is the difference between radiation
heat and convection heat?
Natural stone heaters, low-temperature convectors and infrared wall-mounted radiators,
also known as infrared wave heaters, have
a large heating element which emits heat
directly. These devices therefore give off more
radiation heat than standard convectors and
radiators. This directly heats up objects and
people in the room without having to first pass
through the air in the room.
1. Special dimensions
On request, AEG Haustechnik can produce
Natural stone heatings in special shapes and
deviating sizes, to suit your designs.
USEFUL INFORMATION
ABOUT NATURAL
STONE HEATERS
100 mm
Less energy
People find radiation heat given off by natural
stone heaters, low-temperature convectors
and radiant heaters to be warmer than the
heat given off by convection heaters. The room
temperature can therefore be set around 2 °C
lower without people noticing the difference
and energy savings of around 10–15% can be
made compared with standard convectors
How do I use a natural stone heater as my
only heating system?
The thermal mass of stone means that a natural
stone heater can be used as partial storage
heating. Many energy suppliers offer special
rates, not available during the brief periods
of peak load, for this kind of heating. You first
have to calculate how much heat is needed in
order to determine the heating capacity
required and then the number and size of
units. The EnEV should be noted.
100 mm
Comfortable heat
Direct radiation heat feels very pleasant. Tiled
stoves operate on the same principle. They
transfer heat without any air movement and
therefore without stirring up any dust.
Contact your AEG field contact for more
information
500
100
mm
mm
5,1
81
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
NATURAL STONE HEATING
VOLAKAS
1.1
• Fine-grained stone with sugar grain surface,
light bleached background, with grey, cloudlike marbling. Quarried near Drama.
1.2
• Used as wall cladding, in bathrooms and
shops.
• The most important stone export to China
and the rest of the world for the last 30 years.
1.3
VOLAKAS
1.4
Model VOLAKAS
EAN
1.5
E-Number
NSH 35 VO
NSH 65 VO
NSH 85 VO
NSH 115 VO
NSH 145 VO
NSH 165 VO
40 41056 01588 0
40 41056 01589 7
40 41056 01590 3
40 41056 01591 0
40 41056 01592 7
40 41056 02851 4
189 653
189 654
189 655
189 656
189 657
231 946
1/N/PE~230 50 Hz
Technical Data
Power connection
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
W
350
650
850
1150
1450
1650
Dimensions H x W
cm
40 x 60
40 x 100
50 x 100
60 x 100
60 x 125
60 x 135
Depth / incl. projection
cm
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
Weight
kg
21.0
35.0
44.0
52.0
62.0
70.0
Connected load
JURA
2.1
• Trade name taken from the German Jurassic
mountains. Brown-grey to light-grey and
pale yellow, it is quarried in the Treuchtlinger
Revier.
2.2
2.3
• Used on floors, walls, stairs, window sills and
for edging to floor coverings.
• Well-known throughout Central Europe for
many centuries.
JURA
2.4
Model 2.5
JURA
EAN
E-Number
NSH 35 JA
NSH 65 JA
NSH 85 JA
NSH 115 JA
NSH 145 JA
NSH 165 JA
40 41056 01583 5
40 41056 01584 2
40 41056 01585 9
40 41056 01586 6
40 41056 01587 3
40 41056 02852 1
189 648
189 649
189 650
189 651
189 652
231 947
1/N/PE~230 50 Hz
Technical Data
2.6
3.1
Power connection
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
W
350
650
850
1150
1450
1650
Dimensions H x W
cm
40 x 60
40 x 100
50 x 100
60 x 100
60 x 125
60 x 135
Depth / incl. projection
cm
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
Weight
kg
21.0
35.0
44.0
52.0
62.0
70.0
Connected load
3.2
3.3
MOCCA CREME
3.4
• Beige to light-brown, slightly textured, lightly
flecked with pale brown inclusions. Quarried
near Lissabon.
4.1
MOCCA CREME
4.2
4.3
Model MOCCA CREME
EAN
E-Number
4,4
5,2
NSH 35 MC
NSH 65 MC
NSH 85 MC
NSH 115 MC
NSH 145 MC
NSH 165 MC
40 41056 01593 4
40 41056 01594 1
40 41056 01595 8
40 41056 01596 5
40 41056 01597 2
40 41056 02853 8
189 658
189 659
189 660
189 661
189 662
231 948
1/N/PE~230 50 Hz
Technical Data
Power connection
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
W
350
650
850
1150
1450
1650
Dimensions H x W
cm
40 x 60
40 x 100
50 x 100
60 x 100
60 x 125
60 x 135
Depth / incl. projection
cm
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
Weight
kg
21.0
35.0
44.0
52.0
62.0
70.0
Connected load
5,1
• Used for interior cladding, flooring and
furniture.
• An important export stone, mainly throughout Europe.
82
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
NATURAL STONE HEATING
PRINOS
1.1
• Used for architectural features, sculptures
and interiors.
• An important export stone worldwide for
more than 50 years.
• Smooth, almost white fine-grained stone
with light-grey or even pale yellow
inclusions – from the Isle of Thassos.
1.2
1.3
PRINOS
Model PRINOS
EAN
E-Number
NSH 35 PR
NSH 65 PR
NSH 85 PR
NSH 115 PR
NSH 145 PR
NSH 165 PR
40 41056 01598 9
40 41056 01599 6
40 41056 01600 9
40 41056 01601 6
40 41056 01602 3
40 41056 02854 5
189 663
189 664
189 665
189 666
189 667
231 949
1/N/PE~230 50 Hz
1.4
1.5
Technical Data
Power connection
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
W
350
650
850
1150
1450
1650
Dimensions H x W
cm
40 x 60
40 x 100
50 x 100
60 x 100
60 x 125
60 x 135
Depth / incl. projection
cm
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
Weight
kg
21.0
35.0
44.0
52.0
62.0
70.0
Connected load
PALISANDRO
2.1
• Ued for architectural features, wall cladding,
furniture or as thin tiles.
• Exported worldwide for around 40 years.
• Fine-grained crystalline rock in brownish
hues, sometimes patterned with cloudy, wavy
or striped concentrations of vibrant brown
tints. High mica content.
• Background shades of light to dark-brown or
blue-grey.
2.2
2.3
PALISANDRO
2.4
Model PALISANDRO
NSH 35 PA
NSH 65 PA
NSH 85 PA
NSH 115 PA
NSH 145 PA
40 41056 01608 5
40 41056 01609 2
40 41056 01610 8
40 41056 01611 5
40 41056 01612 2
189 673
189 674
189 675
189 676
189 677
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
W
350
650
850
1150
1450
EAN
E-Number
2.5
Technical Data
Power connection
Connected load
Dimensions H x W
cm
40 x 60
40 x 100
50 x 100
60 x 100
60 x 125
Depth / incl. projection
cm
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
Weight
kg
21.0
35.0
44.0
52.0
62.0
2.6
3.1
3.2
3.3
SYLVIA ANTIK
• Beige to light-brown limestone – almost no
marbling – is hammered or brushed, creating
an attractive antique effect.
3.4
• Used in interiors – particularly
suitable for wood cladding or rustic interiors.
• Important export stone – mainly throughout
Europe.
4.1
SYLVIA ANTIK
Model SYLVIA ANTIK
4.2
NSH 35 SA
NSH 65 SA
NSH 85 SA
NSH 115 SA
NSH 145 SA
NSH 165 SA
40 41056 01603 0
40 41056 01604 7
40 41056 01605 4
40 41056 01606 1
40 41056 01607 8
40 41056 02408 0
189 668
189 669
189 670
189 671
189 672
223 308
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
W
350
650
850
1150
1450
1650
EAN
E-Number
Technical Data
Power connection
Connected load
Dimensions H x W
cm
40 x 60
40 x 100
50 x 100
60 x 100
60 x 125
60 x 135
Depth / incl. projection
cm
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
Weight
kg
21.0
35.0
44.0
52.0
62.0
70.0
4.3
4,4
5,1
83
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
NATURAL STONE HEATING
BLUE PEARL (LABRADOR)
1.1
• Grey-blue, coarse-grained stone of regular
texture. Its structure reflects light so that
some crystals sparkle light blue depending
on angle and position.
1.2
• Used for architectural features, sculptures
and on façades, also a valued ornamental
stone.
• Exported worldwide since 1880 – in every
major city façades, shop fronts and foyers
feature this stone.
1.3
BLUE PEARL (LABRADOR)
1.4
Model BLUE PEARL (LABRADOR)
EAN
1.5
E-Number
NSH 35 LA
NSH 65 LA
NSH 85 LA
NSH 115 LA
NSH 145 LA
40 41056 01613 9
40 41056 01614 6
40 41056 01615 3
40 41056 01616 0
40 41056 01617 7
189 678
189 679
189 680
189 681
189 682
1/N/PE~230 50 Hz
Technical Data
Power connection
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
W
350
650
850
1150
1450
Dimensions H x W
cm
40 x 60
40 x 100
50 x 100
60 x 100
60 x 125
Depth / incl. projection
cm
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
Weight
kg
21.0
35.0
44.0
52.0
62.0
Connected load
VARIOS
2.1
• Fine, sugar-grain stone with light background
hue – characterised by dark-grey cloudy
marbling, with a hint of brown here and
there – quarried near Drama.
2.2
2.3
2.4
VARIOS
Model VARIOS
EAN
2.5
E-Number
3.1
NSH 35 VA
NSH 65 VA
NSH 85 VA
NSH 115 VA
NSH 145 VA
NSH 165 VA
40 41056 01718 1
40 41056 01719 8
40 41056 01720 4
40 41056 01721 1
40 41056 01722 8
40 41056 02407 3
189 876
189 877
189 878
189 879
189 880
223 307
1/N/PE~230 50 Hz
Technical Data
Power connection
2.6
• Used in living rooms, dining rooms, bathrooms and for shop interiors.
• The most important stone export to China
and the rest of the world for the last 30 years.
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
W
350
650
850
1150
1450
1650
Dimensions H x W
cm
40 x 60
40 x 100
50 x 100
60 x 100
60 x 125
60 x 135
Depth / incl. projection
cm
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
3.0 / 7.0
Weight
kg
21.0
35.0
44.0
52.0
62.0
70.0
Connected load
3.2
3.3
3.4
TOWEL RAILS FOR NATURAL STONE HEATINGS
4.1
• High-quality, chrome-plated towel rail
• Easy to install
4.2
NSH HT Chrom
4.3
4,4
5,1
5,2
Model
NSH HT Chrom
EAN
40 41056 02535 3
E-Number
228 958
Description
Towel rail
84
• Installed width: 32 cm
• Upper towel rai: 50 cm
• Lower towel rail: 60 cm
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
GLASS HEATING
Area of use
• The glass heating: an attractive heating
system in a choice design
• As an efficient heating system for spring
and autumn
• Ideal for covering additional heat demand
in the living space, bathroom, hallway or in
utility rooms
Components
• Glass fronting with large radiation panel
spreads pleasant and even heat across
the room without creating noise or air
turbulence
• Space saving heating system; only 5 cm
wall clearance
• Integral on/off switch
• Fully wired
• Free of wear and maintenance
• Convenient room temperature controller
for setting time and temperature
(accessory)
1.1
1.2
Installation
1.3
• Straightforward and stable wall mounting
by one person only
• The wall mounting bracket is fitted to the
wall separately from the appliance and can
be readjusted later
• Due to the all-round bezel on the back of
the appliance, the wall mounting bracket
and power connection are no longer visible
post-installation
1.4
1.5
2.1
Comfortable heat
Direct radiation heat feels very pleasant. Tiled
stoves operate on the same principle. They
transfer heat without any air movement and
therefore without stirring up any dust.
Less energy
People find radiation heat given off by glass
heaters, low-temperature convectors and radiant heaters to be warmer than the heat given
off by convection heaters. The room temperature can therefore be set around 2 °C lower
without people noticing the difference and
energy savings of around 10–15% can be made
compared with standard convectors
USEFUL INFORMATION
ABOUT
GLASS HEATERS
2.2
2.3
2.4
AEG Haustechnik is happy to assist and
will gladly produce a complete quotation,
please call +49 5531 702-0
2.5
2.6
Crystal mirror glass heater
The crystal mirror glass heater is suitable for use
in bathrooms, hallways and dressing rooms as a
convenient auxiliary heater. It can fully replace a
conventional mirror.
USEFUL INFORMATION
ABOUT
CRYSTAL MIRROR
GLASS HEATER
3.1
3.2
3.3
3.4
What is the difference between radiation
heat and convection heat?
Natural stone heaters, glass heaters, low-temperature convectors and infrared wall-mounted
radiators, also known as infrared wave heaters,
have a large heating element which emits heat
directly. These devices therefore give off more
radiation heat than standard convectors and
radiators. This directly heats up objects and
people in the room without having to first pass
through the air in the room.
Convection heaters mainly emit heat to the
ambient air.
This form of heating produces air movement
(convection) which gradually heats the room.
22
4.1
°C
4.2
4.3
Heat radiation
4,4
20
5,1
85
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
GLASS HEATING
GLASS HEATER BLACK – NEW –
1.1
• Wall mounted radiant heater with glass fronting, frameless
• Even surface temperatures
• Perfectly suited as spot or transitional heater
in the bathroom, living space or hallway
• Fully wired
1.2
1.3
GH 500 S
1.4
Model GH 300 S
GH 500 S
GH 700 S
GH 900 S
40 41056 03129 3
40 41056 03130 9
40 41056 03131 6
40 41056 03132 3
234 434
234 435
234 436
234 437
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
IP 24
IP 24
IP 24
IP 24
W
300
500
700
900
Dimensions H x W
cm
60 x 60
60 x100
60 x 140
60 x 180
Weight
kg
7.8
13.0
18.2
23.4
EAN
1.5
• Straightforward installation by one person
only
• May be mounted horizontally or vertically
• On/off switch
• High safety level through 2 high limit safety
cut-outs
• 1.05 m long power cable
E-Number
Technical Data
Power connection
V
Type of protection
Connected load
Available from August 2015
GLASS HEATER WHITE – NEW –
2.1
• Wall mounted radiant heater with glass fronting, frameless
• Even surface temperatures
• Perfectly suited as spot or transitional heater
in the bathroom, living space or hallway
• Fully wired
2.2
2.3
GH 500 W
• Straightforward installation by one person
only
• May be mounted horizontally or vertically
• On/off switch
• High safety level through 2 high limit safety
cut-outs
• 1.05 m long power cable
2.4
Model 2.5
GH 300 W
GH 500 W
GH 700 W
GH 900 W
40 41056 03133 0
40 41056 03134 7
40 41056 03135 4
40 41056 03136 1
234 438
234 439
234 440
234 441
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
IP 24
IP 24
IP 24
IP 24
W
300
500
700
900
Dimensions H x W
cm
60 x 60
60 x100
60 x 140
60 x 180
Weight
kg
7.8
13.0
18.2
23.4
EAN
E-Number
Technical Data
2.6
Power connection
Connected load
3.1
V
Type of protection
Available from August 2015
3.2
CRYSTAL MIRROR GLASS HEATER – NEW –
3.3
• Wall mounted radiant heater with glass fronting, frameless
• Even surface temperatures
• Perfectly suited as spot or transitional heater
in the bathroom, living space or hallway
• Can be used as a replacement for conventional bathroom mirrors
3.4
4.1
GH 300 K
4.2
Model
4.3
• Fully wired
• Straightforward installation by one person
only
• May be mounted horizontally or vertically
• On/off switch
• High safety level through 2 high limit safety
cut-outs
• 1.05 m long power cable
GH 300 K
GH 500 K
GH 700 K
GH 900 K
40 41056 03137 8
40 41056 03138 5
40 41056 03139 2
40 41056 03140 8
234 442
234 443
234 444
234 445
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
IP 24
IP 24
IP 24
IP 24
W
300
500
700
900
Dimensions H x W
cm
60 x 60
60 x100
60 x 140
60 x 180
Weight
kg
7.8
13.0
18.2
23.4
EAN
E-Number
Technical Data
4,4
Power connection
Connected load
5,1
Available from August 2015
5,2
V
Type of protection
86
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
ACCESSORIES FOR NATURAL STONE HEATING AND GLASS HEATING
WIRELESS ROOM TEMPERATURE CONTROLLER
RTF-D – NEW –
• Wireless room temperature controller with
weekly program and digital display
• Convenient control of heating system without laborious cabling
• Easy and intuitive to program
• 5 operating modes available
• Can be used as the master in master/slave
operations (pilot control)
• Wireless range inside buildings approx. 25 m
1.1
• Temperature can be set to between 5 °C and
30 °C
• May be used for mounting on finished walls
or as hand-held transmitter
• Power supply 3 x Micro AAA 1.5 V, part of
the standard delivery (3rd battery for backlit
display)
• Protection class III, Type of protection IP 30
• Dimensions: 110 x 26 x 110,7 mm,
Color: pure white, similar to RAL 9010
1.2
1.3
RTF-D
1.4
1.5
WIRELESS ROOM TEMPERATURE CONTROLLER
RTF-A – NEW –
• Wireless room temperature controller with
set value adjuster
• Convenient control of heating system without laborious cabling
• 2 operating modes available
• Wireless range inside buildings approx. 25 m
• Temperature adjustment from 5 to 30 °C
• May be used for mounting on finished walls
or as hand-held transmitter
• Power supply 2 x Micro AAA 1.5 V, part of the
standard delivery
• Protection class III, Type of protection IP 30
• Dimensions: 78,3 x 25,5 x 83,4 mm,
Color: pure white, similar to RAL 9010
RTF-A
2.1
SOCKET-TYPE RECEIVER
RTF-SE – NEW –
• Socket receiver, operation with glass or
natural stone heaters via an existing socket;
ideal for retrofitting
• Self-learn key for easily establishing the wireless connection
• Reliable wireless transfer at 868 MHz
• LED to indicate the current state
• Emergency mode in the case of permanently
interrupted wireless connection
• IP 30 protection, safety category II, for
consumers in safety category I and II
• Maximum switching current 13 A
• Dimensions: 58,5 x 39 x 126 mm,
Color: pure white, similar to RAL 9010
2.2
2.3
RTF-SE
2.4
2.5
FLUSH-MOUNTED RECEIVER
RTF-E UP – NEW –
• Receiver for mounting on unfinished walls
with integral strain relief for permanently
connecting a storage heater, glass or natural
stone heater
• Self-learn key for easily establishing the wireless connection
• Reliable wireless transfer at 868 MHz
• LED to indicate the current state
• Emergency mode in the case of permanently
interrupted wireless connection
• IP 30 protection, safety category II, for
consumers in safety category I and II
• Maximum switching current 11 A, from 30 °C
ambient temperature, 7.5 A
• Dimensions: 81 x 42,5 x 85 mm,
Color: pure white, similar to RAL 9010
2.6
3.1
3.2
RTF-E UP
3.3
SURFACE-MOUNTED RECEIVER
RTF-E AP – NEW –
• Receiver for mounting on unfinished walls
with integral strain relief for permanently
connecting a storage heater, glass or natural
stone heater
• Self-learn key for easily establishing the wireless connection
• Reliable wireless transfer at 868 MHz
3.4
• LED to indicate the current state
• Emergency mode in the case of permanently
interrupted wireless connection
• IP 30 protection, safety category II, for
consumers in safety category I and II
• Maximum switching current 13 A
• Dimensions: 78,3 x 25,5 x 83,4 mm,
Color: pure white, similar to RAL 9010
4.1
4.2
RTF-E AP
4.3
Model
EAN
E-Number
Description
RTF-D
RTF-A
RTF-SE
RTF-E UP
RTF-E AP
40 41056 03032 6
40 41056 03033 3
40 41056 03126 2
40 41056 03034 0
40 41056 03035 7
233 862
233 863
234 446
233 864
233 865
Socket-type wireless
receiver
Wireless receiver,
flush-mounted
Wireless receiver,
surface-mounted
Wireless room temperature controller Wwireless room temperature
with weekly program
controller
4,4
5,1
87
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
ACCESSORIES FOR NATURAL STONE HEATING AND GLASHEIZUNGEN
ELECTRONIC 2-POINT ROOM TEMPERATURE CONTROLLER
1.1
1.2
1.3
RTE 900 SN
1.4
• Electronic 2-point room temperature
controller (RTE 900 SN)
• Temperature set to between
around 5 °C and 40 °C (RTE 900 SN) or
around 5 °C and 30 °C (RTE 5050 SN)
• With 2-pin mains switch
(RTE 900 SN 1-polig)
• With control LED
• Temperature can be reduced using separate
timer
• For flush-mounted assembly in 55-type flushmounted socket
• RTE 900 SN: Suitable for the following
switch programs: Busch Jaeger Reflex SI
polished alpine white, Merten Atelier 3971
19 polar white and Merten M1 3971 18 RAL
9010 polished
• RTE 5050 SN: Installation dimensions of
50 x 50 mm, suitable for virtually all switch
programs
• Temperature set to between
around 5 °C and 30 °C
• With control LED
• Temperature can be reduced using separate
timer
• For flush-mounted assembly in 55-type flushmounted socket
• Installation dimensions of 50 x 50 mm,
suitable for virtually all switch programs
1.5
RTE 5050 SN
2.1
2.2
2-POINT ROOM TEMPERATURE CONTROLLER
2.2
2.3
2.4
2.5
• Thermal feedback for high control accuracy
and low switching hysteresis
• Temperature can be set to between around
5 °C and 30 °C
• Modern, functional design, in pure white
• With 1-pin ON/OFF mains switch
• Temperature can be reduced using separate
timer
• With telltale
• With adjustable restriction of range
• For surface mounting on flush-mounting
socket Ø 55 mm
• Thermal feedback for high control accuracy
and low switching hysteresis
• Temperature can be set to between around
5 °C and 30 °C
• Modern, functional design, in pure white
• Temperature can be reduced using separate
timer
• With telltale
• With adjustable restriction of range
• For surface mounting on flush-mounting
socket Ø 55 mm
• Thermal feedback for high control accuracy
and low switching hysteresis
• Temperature can be set to between around
5 °C and 30 °C
• Modern, functional design, in pure white
• With 1-pin ON/OFF mains switch
• Temperature can be reduced using separate
timer
• With telltale
• With adjustable restriction of range
• For flush mounting in flush-mounting socket
Ø 55 mm
RT 601 SN
2.6
3.1
3.2
RT 600
3.3
3.4
4.1
4.2
RT 5050 SN
4.3
4,4
5,1
Model
EAN
RTE 5050 SN
RT 601 SN
RT 600
RT 5050 SN
RT 5050
40 41056 02405 9
40 41056 02398 4
40 41056 02397 7
40 41056 02403 5
40 41056 02402 8
223 302
E-Number
184 868
223 305
223 298
223 297
223 303
Component
Mains switch
Mains switch
Mains switch
–
Mains switch
–
flush-mounted
flush-mounted
surface-mounted
surface-mounted
flush-mounted
flush-mounted
16/3600
16/3600
10/2300
16/3600
10/2300
10/2300
Installation
Switching current/cap.
5,2
RTE 900 SN
40 14890 75305 8
88
A/W
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
DIRECT HEATERS
WALL-MOUNTED CONVECTORS, PLINTH CONVECTOR HEATERS AND FREE STANDING CONVECTORS
Area of use
Components
• Low procurement costs and the rapid output of heat are the benefits of concectors.
• They are excellent forms of supplementary
heating for bathrooms, kitchens and offices
during transition periods.
• But convectors are also a great choice as
the only form of heating in rooms, holiday
apartments or offices which are only used
occasionally.
• Another popular area of use for convectors
is in mobile facilities such as office containers, mobile fast-food outlets, on-the-road
businesses and much more.
• The frost stat warms smaller exterior rooms,
thereby protecting water pipes and sensitive goods against frost damage
• All AEG convectors are fitted with continuously variable temperature control
• The wide range of products available from
AEG features the right unit for any purpose
and comfort requirement
Infrared short-wave radiant heaters –
(direct) heat in a flash with unlimited scope
for use
The new range of AEG radiant heaters brings a
whole new dimension to targeted and effective
heating. The pioneering short-wave technology provides cosy temperatures at the touch
of a button – saving energy and without any
thermal losses.
1.1
1.2
1.3
Installation
• The units are fitted to the wall with separate
metal brackets (the upright convectors can
also be operated as standalone units)
• WKL wall-mounted convectors and upright
convectors are plug-in variants.
The NKE low-temperature convectors and
KLE convector strip heaters have a feed
cable for permanently connecting to the
mains
With a power range of 1.5–6 kW, they offer
individual heat for balconies and garages, converted basements and outdoor seating areas in
the catering and commercial sector.
High-frequency infrared wave radiators produce no zeros, are silent, odourless, weatherproof and good-looking units just waiting to be
plugged in.
1.4
1.5
USEFUL INFORMATION
ABOUT
DIRECT HEATERS
22
2.1
2.2
2.3
°C
2.4
What is the difference between radiation
heat and convection heat?
Natural stone heaters, glass heaters, low-temperature convectors and infrared wall-mounted
radiators, also known as infrared wave heaters,
have a large heating element which emits heat
directly. These devices therefore give off more
radiation heat than standard convectors and
radiators. This directly heats up objects and
people in the room without having to first pass
through the air in the room.
Convection heaters mainly emit heat to the
ambient air.
This form of heating produces air movement
(convection) which gradually heats the room.
Heat radiation
22
2.5
°C
2.6
20
3.1
Heat radiation
3.2
20
27
3.3
°C
3.4
4.1
27
°C
Convection heat
4.2
17
4.3
Convection heat
4,4
17
5,1
89
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
INFRARED WAVE CONVECTORS
INFRARED WAVE CONVECTORS NKE – NEW –
1.1
• Infrared wave unit with pleasant, large
amount of heat radiated for high levels of
snugness
• Even distribution of heat through use of
radiators offering large surfaces
• Aluminium radiators
• Continuously variable, electronic temperature control with maximum control accuracy
of +/-0.1 °C
• Various heating programs can be set,
includes frost protection setting
• ECO mode: reduction of 3.5 °C from comfort
temperature
1.2
1.3
1.4
1.5
NKE 103
• High safety standard thanks to IP 24 splash
protection and protection class II
• Flat design: just 12 cm deep, requires little
space
• Operating element on top side on right
• Telltale for heating mode
• For horizontal installation, with separate zincplated wall bracket
• Connection with shaped plug
• With automatic thermal fuse
• Metal housing, colour: white RAL 9016
• Connection: 1/N~230 V 50 Hz
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
Model
EAN
4.1
E-Number
NKE 103
NKE 153
NKE 203
40 41056 03224 5
40 41056 03225 2
40 41056 03226 9
234 817
234 818
234 819
Dimensions
4.2
4.3
Height
cm
450
450
450
Width
cm
595
815
1035
Depth + projection
cm
98 + 22
98 + 22
98 + 22
V
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
W
1000
1500
2000
–
–
–
Connection type
Shaped plug
Shaped plug
Shaped plug
Length of connection cable
approx. 1 m
approx. 1 m
approx. 1 m
IP 24
IP 24
IP 24
6.0
8.1
10.2
Technical Data
Power connection
Output
4,4
5,1
With blower
Type of protection
Weight
kg
Palett: NKE 103 - 20 items; NKE 153 - 13 items; NKE 203 - 11 items · Available from April 2015
5,2
90
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
DIRECT HEATERS
DUO CONVECTORS
DUO-CONVECTORS DKE – NEW –
(RADIANT AND CONVECTION HEATERS)
• Radiant panel heaters and convection heaters with pleasant, large area heat radiation
for high levels of comfort
• Even heat distribution through large area
heater panel
• Two heating systems in a single appliance
• Highly accurate temperature adjustment
through user friendly keypad
1.1
• Straightforward and practical seven-day programming with three preset programs – one
for day-to-day, one for the office and one for
weekends away
• Movement sensor which automatically
reduces the room temperature when nobody
is present
• Economy safety function which puts the
appliance into frost protection mode when a
window has been left open accidentally
• Indicator displays the power consumption
• Color: white RAL 9010
1.2
1.3
1.4
DKE 150
1.5
DKE operating element
Display:
Set temperature
B
120
2.1
Symbols:
• Appliance is heating (bottom left)
• Comfort mode (top left)
• Efficiency of the selected set temperature
(arrow points to the respective efficiency bar on a scale of green to red)
2.2
2.3
504
2.4
2.5
2.6
3.1
Dimensions in mm
3.2
3.3
3.4
4.1
Model
DKE 75
DKE 100
DKE 150
DKE 200
40 41056 03230 6
40 41056 03231 3
40 41056 03232 0
40 41056 03233 7
234 823
234 824
234 825
234 826
675
790
1010
1240
V
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
W
750
1000
1500
2000
Shaped plug
Shaped plug
Shaped plug
Shaped plug
IP 24
IP 24
IP 24
IP 24
6.7
7.7
9.7
11.5
EAN
E-Number
4.2
Dimensions
Width B
mm
4.3
Technical Data
Power connection
Output
Connection type
Type of protection
Weight
kg
4,4
5,1
Palett: DKE 75 - 24 Items; DKE 100 - 18 Items; DKE 150 - 16 Items; DKE 200 - 13 Items · Available from May 2015
91
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
MOBILE RADIANT HEATER
MOBILE RADIANT HEATER – NEW –
1.1
• Radiant panel heater with pleasant, large
area heat radiation for high levels of comfort
• Even heat distribution through large area
heater panel
• Two output stages, controlled by the adjustable room thermostat (750 W/1500 W)
• Heating indicator
• Control indicator
• Integral mechanical room temperature
controller
• Grip mould at the back for easy handling
1.2
1.3
1.4
• Easy to fit wall mounting bracket
• "Dark grey Pantone 425 C" colour; grille in
silver
• IP 24, protection class II
• Including cable tidy
• Modern design
• Pleasant radiated heat
1.5
SHG 150
2.1
SHG 150 user interface
2.2
2.3
Dimensions in mm
2.4
790
2.5
100
2.6
3.1
475
3.2
3.3
3.4
4.1
Model
4.2
SHG 150
EAN
40 41056 03235 1
E-Number
4.3
4,4
234 828
Technical Data
Power connection
V
W
1500
Output stages
W
750 / 1500
With blower
–
Connection type
5,1
Shaped plug
Type of protection
Weight
IP 24
kg
Palett: 28 Items · Available from June 2015
5,2
1/N~230 50 Hz
Output
92
6.9
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
DIRECT HEATERS
WALL-MOUNTED CONVECTORS
WALL-MOUNTED CONVECTORS WKL
WITH MECHANICAL ROOM TEMPERATURE CONTROLLER
1.1
• Operating elements can be read from above
• Separate mounting bracket
• Splash protection IP 24, protection class II
• Housing and fan grate colour: alpine white,
similar to RAL 9016
• With automatic reset thermal fuse
• Connection with shaped plug, feed cable
1 m
• VDE, VDE/GS, CE
• Output graded to meet demand
• Temperature selected in continuously variable manner between 6 °C and 30 °C, with
frost protection setting
• The temperature controller can be limited
• Mechanical temperature controller
• High-quality stainless steel heater with
aluminium fins
• ON/OFF switch on top right of unit
1.2
1.3
1.4
1.5
WKL 2003 S
2.1
2.2
2.3
2.4
2.5
100
78
B
2.6
450
3.1
3.2
3.3
Dimensions in mm
3.4
4.1
Model
WKL 503 S
EAN
WKL 753 S
WKL 1003 S
WKL 1503 S
WKL 2003 S
WKL 2503 S
WKL 3003 S
40 41056 02117 1 40 41056 02118 8 40 41056 02119 5 40 41056 02121 8 40 41056 02123 2 40 41056 02124 9 40 41056 02125 6
E-Number
4.2
220 996
220 997
220 998
221 000
221 002
221 003
221 004
370
445
445
590
740
890
1040
V
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
W
500
750
1000
1500
2000
2500
3000
–
–
–
–
–
–
–
Shaped plug
Shaped plug
Shaped plug
Shaped plug
Shaped plug
Shaped plug
Shaped plug
IP 24
IP 24
IP 24
IP 24
IP 24
IP 24
IP 24
3.8
4.4
4.4
5.7
6.8
8.1
9.4
Dimensions
Width B
mm
4.3
Technical Data
Power connection
Output
With blower
Connection type
Type of protection
Weight
kg
4,4
5,1
Palett: WKL 503 S 84 items; WKL 753 S 72 items; WKL 1003 S 72 items; WKL 1503 S 56 items; WKL 2003 S 37 items; WKL 2503 S 34 items; WKL 3003 S 28 items
93
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
WALL-MOUNTED CONVECTORS
WALL-MOUNTED CONVECTORS WKL
WITH ELECTRONIC ROOM TEMPERATURE CONTROLLER
1.1
1.2
1.3
1.4
1.5
• Electronic room temperature controller
• Rotary switch for frost protection
(around 7°C),
ECO: Night-time reduction of around 3 °C
during eco mode, 120 min-timer for
comfort mode
• User interface with cover flap and
LED display for ECO, frost protection and
heating mode
• Temperature selected in continuously variable manner between 6 °C and 30 °C, with
frost protection setting around 7 °C
• High-quality stainless steel heater with
aluminium fins
• ON/OFF switch on top right of unit
• Operating elements can be read from above
• Separate mounting bracket
• Splash protection IP 24, protection class II
• Housing and fan grate colour: alpine white,
similar to RAL 9016
• With automatic reset thermal fuse
• Connection with shaped plug, feed cable
1m
• VDE, VDE/EMV, CE
Electronic room temperature controller
• ON/OFF switch, omnipolar
• Operating modes:
frost protection, ECO mode, comfort mode,
automatic
• Excellent control characteristics for the
following:
– High levels of user convenience
– Energy savings as a result of room
temperature reduction
• Power cable with mains plug
• Stainless steel body with aluminium fins for
improved heat dissipation
WKL 2003 SE
2.1
WKL … SE operating element
2.2
2.3
2.4
2.5
2.6
100
78
B
450
3.1
3.2
3.3
Dimensions in mm
3.4
4.1
Model
WKL 503 SE
EAN
4.2
WKL 753 SE
WKL 1003 SE
WKL 1503 SE
WKL 2003 SE
WKL 2503 SE
WKL 3003 SE
40 41056 02656 5 40 41056 02608 4 40 41056 02609 1 40 41056 02610 7 40 41056 02611 4 40 41056 02612 1 40 41056 02613 8
E-Number
229 758
229 759
229 760
229 761
229 762
229 763
229 764
370
445
445
590
740
890
1040
V
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
W
500
750
1000
1500
2000
2500
3000
–
–
–
–
–
–
–
Shaped plug
Shaped plug
Shaped plug
Shaped plug
Shaped plug
Shaped plug
Shaped plug
IP 24
IP 24
IP 24
IP 24
IP 24
IP 24
IP 24
3.8
4.4
4.4
5.7
6.8
8.1
9.4
Dimensions
4.3
Width B
Power connection
4,4
mm
Technical Data
Output
With blower
Connection type
5,1
Type of protection
Weight
kg
Palett: WKL 503 SE 84 items; WKL 753 SE 72 items; WKL 1003 SE 72 items; WKL 1503 SE 56 items; WKL 2003 SE 37 items; WKL 2503 SE 34 items; WKL 3003 SE 28 items
5,2
94
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
DIRECT HEATERS
WALL-MOUNTED CONVECTORS
FREE STANDING FLASH WALL-MOUNTED CONVECTORS WKL
WITH MECHANICAL ROOM TEMPERATURE CONTROLLER
• Mechanical temperature controller
• Includes feet with castors
• With fitted pendulum switch as protection
from tipping
• Temperature selected in continuously
variable manner between 6 °C and 30 °C,
with frost protection setting around 7 °C
• The temperature controller can be limited
• High-quality stainless steel heater with
aluminium fins
• ON/OFF switch on top right of unit
1.1
• Operating elements can be read from above
• Separate mounting bracket
• Splash protection IP 24, protection class II
• Housing and fan grate colour: alpine white,
similar to RAL 9016
• With automatic reset thermal fuse
• Connection with shaped plug, feed cable
1.5 m
• TÜV/GS, CE
• Output graded to meet demand
1.2
1.3
1.4
1.5
WKL 2003 F
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
Model
WKL 753 F
WKL 1003 F
WKL 1503 F
WKL 2003 F
WKL 2503 F
40 41056 02626 8
40 41056 02627 5
40 41056 02628 2
40 41056 02629 9
40 41056 02630 5
229 796
229 797
229 798
229 799
229 800
445
445
590
740
890
V
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
W
750
1000
1500
2000
2500
–
–
–
–
–
Shaped plug
Shaped plug
Shaped plug
Shaped plug
Shaped plug
IP 24
IP 24
IP 24
IP 24
IP 24
4.7
4.7
6.1
7.1
8.4
EAN
E-Number
4.2
Dimensions
Width B
mm
4.3
Technical Data
Power connection
Output
With blower
Connection type
Type of protection
Weight
kg
4,4
5,1
Palett: WKL 753 F 46 items; WKL 1003 F 48 items; WKL 1503 F 37 items; WKL 2003 F 34 items; WKL 2503 F 28 items
95
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
PLINTH CONVECTOR HEATERS
PLINTH CONVECTOR HEATERS KLE
1.1
• Low installation height, just 25 cm high,
especially for fitting under low window
parapets
• Temperature can be set in continuously
variable manner to between around 10 °C
and 30 °C, temperature controller can be
limited
• High control accuracy thanks to electronic
temperature controller
• Sliding switch for 0 position, frost protection
(7° C), programme, ECO and comfort mode
1.2
1.3
KLE 1002
1.4
• Night-time reduction of around 3.5 °C during
ECO mode
• High-quality stainless steel heater with
aluminium fins
• With automatic reset thermal fuse
• Protection class II, splash protection IP 24
• Color: white RAL 9016
• Permanent connection, 1 m feed cable
1.5
2.1
2.2
2.3
2.4
2.5
2.6
3.1
100
250
3.2
3.3
Dimensions in mm
3.4
Model
4.1
EAN
E-Number
KLE 502
KLE 1002
40 41056 01703 7
40 41056 01704 4
189 771
189 772
Dimensions
4.2
4.3
Height
mm
250
250
Width
mm
662
1110
Depth + projection
mm
78 + 22
78 + 22
V
1/N~230 50 Hz
1/N~230 50 Hz
W
500
1000
Technical Data
Power connection
4,4
Output
With blower
Connection type
5,1
Type of protection
Weight
kg
Palett: KLE 502 27 items; KLE 1002 18 items
5,2
96
–
–
Permanent connection
Permanent connection
IP 24
IP 24
4.0
5.9
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
DIRECT HEATERS
BATHROOM HEATERS
BATHROOM HEATERS BHG
1.1
BHG 750 W, BHG 1000 W:
• Bathroom heater and towel dryer in one
• Metal housing
• Electrical temperature control
• Temperature controller can be set infinitely
variably between frost protection and
approx. 30 °C
• ON/OFF switch
• Splash-protected design IP 24,
protection class II
• Simple installation
• Connection with shaped plug,
feed cable 1 m
• Color: white, RAL 9016
• Connection: 1/N~230 V 50 Hz
• 2 hour boost function for constant operation.
May be saved as day program.
• Stainless steel immersion heater
• LED indicator for boost and heating mode
• Incl. two bathrobe hooks
• Additional bathrobe hooks available as spare
parts
1.2
1.3
1.4
1.5
BHG 750 W
BHG 1000 W
2.1
Operating element BHG 750 W
2.2
BHG 750 C:
• Bathroom heater and towel dryer in one
• Metal housing
• Electrical temperature control
• Temperature controller can be set infinitely
variably between frost protection and
approx. 30 °C
• ON/OFF switch
• Splash-protected design IP 24,
protection class II
• Simple installation
• Connection with shaped plug,
feed cable 1 m
• Color: chrome
• Connection: 1/N~230 V 50 Hz
• 2 hour boost function for constant operation.
May be saved as day program.
• Stainless steel immersion heater
• LED indicator for boost and heating mode
• Incl. two bathrobe hooks
• Additional bathrobe hooks available as spare
parts
2.3
2.4
2.5
2.6
3.1
3.2
BHG 750 C
3.3
Operating element BHG 750 C
3.4
Model
EAN
E-Number
BHG 750 W (white)
BHG 1000 W (white)
BHG 750 C (chrome)
40 41056 02855 2
40 41056 03031 9
40 41056 02856 9
231 950
233 861
231 951
4.1
4.2
Dimensions
Height
mm
1453
1781
1658
Width
mm
480
550
600
Depth
mm
100
115
110
V
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
W
750
1000
750
Shaped plug
Shaped plug
Shaped plug
IP 24
IP 24
IP 24
16
30
24
4.3
Technical Data
Power connection
Output
Connection type
Type of protection
Weight
kg
4,4
5,1
Palett: BHG 750 10 items, BHG 1000 5 items
97
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
FREE STANDING CONVECTORS AND FROST PROTECTION HEATER
FREE STANDING CONVECTORS SK
1.1
•SK 204: convector with 3 heating levels of
750 W, 1250 W and 2000 W, plug-in variant
•SK 204 T: convector with 2 heating levels
of 1000 W and 2000 W with quietrunning
blower for faster distribution of heat
• Temperature selector controller can be set
in continuously variable manner to between
around 5 °C and 35 °C, with frost protection
level
1.2
1.3
1.4
SK 204
• Safety thanks to overheating protection
• With wall bracket
• Color: white, RAL 9016, grate dark grey
• Protection class II
• Connection cable of around 1.4 m, with
mains plug
• Dimensions:
height 44 cm, width 60 cm, depth 11 cm
1.5
SK 204 T
2.1
Model
EAN
E-Number
2.2
2.3
SK 204 T
40 41056 02239 0
222 146
222 147
1/N~230 50 Hz
Technical Data
Power connection
V
1/N~230 50 Hz
Output
W
2000
2000
Output stages
W
0-750-1250-2000
0-1000-2000
With blower
Connection type
2.4
SK 204
40 41056 02238 3
Type of protection
Weight
kg
–
•
Shaped plug
Shaped plug
IP 20
IP 20
4.0
4.5
Palett: SK 204/SK 204 T 44 items each
2.5
FROST PROTECTION HEATER FW
2.6
• The frost protection heater controls the
temperature in smaller rooms away from central areas, thereby protecting water pipes or
sensitive goods from frost
• Heating capacity of 500 W
• Selector knob for selecting temperature in
continuously variable manner between frost
protection at 5 °C and 30 °C
• Safety thermostat can be reset in the event
3.1
3.2
3.3
3.4
FW 505
4.1
Model
4.2
FW 505
EAN
40 41056 02116 4
E-Number
4.3
4,4
220 995
Technical Data
V
1/N~230 50 Hz
Output
Power connection
W
500
Output stages
W
–
With blower
–
Connection type
5,1
Shaped plug
Type of protection
Weight
IP 20
kg
FW 505 Covering box: 12 item, Palett: 180 item
5,2
98
1.0
of overheating
• Protection class II, IP 20
• Simple wall mounting
• Metal housing: white, RAL 9016, plastic side
parts: grey
• Connection cable of 90 cm, with flat plug
• Dimensions:
H 25.0 cm, W 25.0 cm, D 11.0 cm,
Weight: 1.0 kg
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
DIRECT HEATERS
FAN HEATERS
Area of use
Installation
• Fan heaters are used to quickly heat up
bathrooms, toilet rooms or other small
rooms
• The units are fitted to the wall using separate metal brackets
• One socket is all that is needed for use
1.1
1.2
Components
1.3
• To ensure quick heat output, the fan heaters are equipped with a powerful blower
• All units have a continuously variable
temperature control and some have
incorporated timers for operating over
particular times
• Safe operation guaranteed in bathrooms
thanks to wall mounting and splash
protection
1.4
1.5
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
99
5,2
WATER HEATERS
SPACE HEATERS
WALL-MOUNTED
CONVECTORS,
PLINTH CONVECTOR
HEATERS AND FREE STANDING CONVECTORS
FLOOR WARMING
SYSTEMS
NO-FROST
DIRECT HEATERS
FAN HEATERS
FAN HEATERS IN SOLID-METAL VERSION
1.1
• Fan heater for quickly heating up the
bathroom
• Very flat design, just 10.5 cm deep
• High-quality solid metal version
• Temperature can be set in continuously
variable manner to between frost protection
and approx. 30 °C
• Quiet-running tangential blower
1.2
1.3
1.4
•VH 227: uncontrolled operation over limited
time with 60-minute timer
•VH 229: with 24-hour timer
• Connection cable (75 cm) with safety plug
• Spray-protected design IP 23,
protection class I
• Color: white
1.5
VH 206
2.1
2.2
VH 227
VH 229
2.3
2.4
FAN HEATER WITH SHEET STEEL HOUSING
2.5
• Maximum safety with high limit safety cut-out
• Fan heater for quickly heating up the bathroom
• Stable sheet metal housing in modern
design
• Temperature can be set in continuously
variable manner to between frost protection
and approx. 35 °C
• Connection cable with shaped plug
2.6
3.1
3.2
3.3
• Quick to assemble with 3 screws
• Safety in the bathroom thanks to splash protection design IP 23 and protection class II
• Dimensions:
H 40.0 cm, W 27.6 cm, D 11.5 cm,
weight 3.0 kg
• Color: white
VH 211
3.4
4.1
Model
4.2
VH 206
VH 227
VH 229
VH 211
40 14890 75038 5
40 14890 75039 2
40 14890 75040 8
40 41056 01052 6
184 395
184 398
184 399
187 614
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N~230 50 Hz
W
2000
2000
2000
2000
With blower
•
•
•
•
With 24-hour timer
–
–
•
–
With 60-minute timer
–
•
–
–
IP 23
IP 23
IP 23
IP 23
4.6
4.7
4.7
4.0
EAN
E-Number
4.3
Technical Data
Power connection
Output
4,4
5,1
Type of protection
Weight
kg
Palett: VH 206 - 229 50 items; VH 211 66 items
5,2
100
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
DIRECT HEATERS
FAN HEATERS · HEATED CARPETS
Area of use
Components
• AEG fan heaters offer quick, mobile heat to
living rooms, offices, workshops and much
more.
• AEG heated carpets are an interesting
alternative to fan heaters for offices in particular. They pleasantly warm up feet using
a fraction of the energy
• All fan heaters have several output stages
and a separate temperature selector
• The heated carpets are switched on and off
using a switch in the mains feed cable
1.1
1.2
1.3
1.4
1.5
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
101
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
FAN HEATERS
HS 204 ST
1.1
1.2
1.3
1.4
1.5
HS 204 ST
With protection
from tipping over
• Fan heater (upright unit) with protection from
tipping over
• Small dimensions,
large heating capacity - 2000 W
• Attractive design
• Rotary switch for 0 setting, cold level,
1000 W and 2000 W operation
• Axial blower for high air output
• Temperature can be set in continuously
variable manner to between frost protection
and approx. 45 °C
• With operating telltale
• With protection against overheating and
thermal fuse for maximum safety
• Protection class II
• Maximum protection from tipping over
• Practical recessed grip
• Connection cable with shaped plug
• Color: silver/grey
Covering box: 15 items · Palett: 90 items
HS 203 T
• Fan heater (upright unit) with protection from
tipping over
• Small dimensions,
large heating capacity - 2000 W
• Rotary switch for 0 setting, cold level,
1000 W and 2000 W operation
• Axial blower for high air output
• Temperature can be set in continuously
variable manner to between frost protection
and approx. 45 °C
• With operating telltale
2.1
2.2
2.3
HS 203 T
2.4
• With protection against overheating and
thermal fuse for maximum safety
• Protection class II
• Maximum protection from tipping over
• Practical recessed grip
• Connection cable with shaped plug
• Color: white
Covering box: 16 items · Palett: 128 items
With protection
from tipping over
2.5
HS 206
2.6
• Fan heater (upright unit, wall mounting
possible)
• Small dimensions,
large heating capacity - 2000 W
• Particularly low-noise, quiet operation at the
1000 W level
• Attractive design
• Rotary switch for 0 setting, cold level,
1000 W and 2000 W operation
• Axial blower for high air output
• Temperature can be set in continuously
variable manner to between frost protection
at 5 °C and approx. 30 °C
3.1
3.2
3.3
HS 206
3.4
• With protection against overheating and
thermal fuse for maximum safety
• Protection class II
• Maximum protection provided by safety
temperature limiter
• Connection cable 1.5 m with shaped plug,
with storage compartment for connection
cable
• Color: silver/anthracite
• IP rating: IP 21
• TÜV GS
Covering box: 4 items · Palett: 72 items
4.1
Model
EAN
4.2
E-Number
HS 204 ST
HS 203 T
HS 206
40 41056 01788 4
40 41056 01786 0
40 41056 02659 6
189 972
189 970
229 939
Dimensions
4.3
4,4
5,1
Height
cm
28.0
26.0
28.0
Width
cm
20.3
24.5
23.6
Depth
cm
15.4
13.5
13.5
1/N~230 50 Hz
Technical Data
Power connection
V
1/N~230 50 Hz
1/N~230 50 Hz
Connected load
W
2000
2000
2000
Output stages
W
0-1000-2000
0-1000-2000
0-1000-2000
Weight
kg
Conformation/Approbation
5,2
102
1.6
1.4
1.3
CE
CE
CE + TÜV GS
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
DIRECT HEATERS
FAN HEATERS
FAN HEATER HS 207 – NEW –
• Advanced fan heater with anti-tip protection
• Unique design without visible air grilles
Exclusive and unique functions:
• SWEET air technology: – distributes the heat
evenly without unpleasant draughts
• SILENT-AIR-FLOW – up to 40 % quieter
than traditional fan heaters (tested against
standard fan heaters)
• Sliding switch for 0-setting, cold level,
900 W and 1800 W
• Upright unit
• Connection cable with shaped plug
• Practical recessed grip
1.1
• With protection against overheating and
thermal fuse for maximum safety
• Protection class II
• With operating telltale
• Type of protection IP 21
1.2
1.3
Color:
• HS 207 O = orange
• HS 207 B = beige
• HS 207 G = grey
1.4
Covering box: 4 items · Palett: 112 items
1.5
HS 207 O
2.1
150
HS 207 B
2.2
2.3
230
Dimensions in mm
2.4
2.5
2.6
HS 207 G
3.1
300
3.2
3.3
3.4
User interface sliding switch
Model
EAN
E-Number
HS 207 O
HS 207 B
HS 207 G
40 41056 03236 8
40 41056 03237 5
40 41056 03238 2
234 829
234 830
234 831
4.1
4.2
Dimensions
Height
cm
30
30
30
Width
cm
23
23
23
Depth
cm
15
15
15
1/N~230 50 Hz
4.3
Technical Data
Power connection
V
1/N~230 50 Hz
1/N~230 50 Hz
Connected load
W
1800
1800
1800
Output stages
W
Cold air - 900 - 1800
Cold air - 900 - 1800
Cold air - 900 - 1800
Weight
kg
Conformity/Approval
1.5
1.5
1.5
CE
CE
CE
4,4
5,1
Available from June 2015
103
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
HEATED CARPETS
TBF
1.1
• Rapid heat for areas cold at floor-level
• Carpet surface, for offices and homes
• Quick and energy-saving output of heat
• Available in various sizes
1.2
1.3
• OFF/ON/OFF sliding switch in the mains
connection cable, with flat plug
• Color: grey
• Protection class II
Covering box: 4 items · Palett: 72 items
TBF 65
1.4
1.5
TBG
• Rapid heat for areas cold at floor-level
• Robust PVC surface for workshops and
commerce
• Quick and energy-saving output of heat
• Available in various sizes
2.1
• Color: grey
• Protection class II
• IP rating: IPX 7
Covering box: 4 items · Palett: 72 items
2.2
2.3
TBG 75
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
Model
EAN
4.2
E-Number
TBF 65
TBF 95
TBG 75
TBG 105
40 14890 00352 8
40 14890 00353 5
40 41056 02344 1
40 41056 02345 8
183 804
183 805
223 244
223 245
Dimensions
4.3
4,4
5,1
Height
cm
0.6
0.6
0.4
0.4
Width
cm
70.0
90.0
55.0
55.0
Depth
cm
50.0
60.0
55.0
75.0
Technical Data
V
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
1/N~230 50 Hz
Connected load
Power connection
W
65
95
75
105
Output stages
W
0-65-0
0-90-0
–
–
Weight
kg
1.0
1.5
1.5
2.0
Covering box: 4 items; Palett: 72 items
5,2
104
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
DIRECT HEATERS
INFRARED QUARTZ RADIANT HEATER
Area of use
Installation
• The ideal source of heat for the bathroom
and for occasionally heating adjacent areas
• Rapid heating up and pleasant output of
radiation heat ensure a pleasant sense of
heat
• The units are fitted directly on the wall
• The cable is connected at the side or from
a fixed part on the wall
1.1
1.2
1.3
Components
• The units offer several output stages
• Operated using practical pull switch
• The reflectors can be swung horizontally
1.4
1.5
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
105
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
INFRARED QUARTZ RADIANT HEATER
INFRARED QUARTZ RADIANT HEATER IWQ – NEW –
1.1
• Quartz radiant heating element for wall
mounting
• Setting angle 0° or 30°
• IWQ 121: with 2 output stages
• IWQ 181: with 3 output stages
1.2
1.3
• Safe operation in the bathroom thanks to
IP 24 splash protection and protection class II
• Color: grey
• Fixed centrally on the back
1.4
1.5
2.1
2.2
2.3
INFRARED QUARTZ RADIANT HEATER IWQ – NEW –
RADIANT HEATER FOR BABY CHANGING STATION
2.4
• Front made from heat-resistant aluminium
• Radiant heater for baby changing stations
• Heating tube with metal sheath (no risk of
injury to the baby)
• Setting angle 0 ° up to 40°
• Two-switch system: Pull cord can be mounted in two different positions (double sided)
• Connection: 1.8 m power cable with plug
2.5
2.6
3.1
3.2
3.3
3.4
Model
EAN
4.1
E-Number
IWQ 121
IWQ 181
IWQ 60
40 41056 03227 6
40 41056 03228 3
40 41056 03229 0
234 820
234 821
234 822
Dimensions
4.2
4.3
4,4
Width
mm
530
630
600
Height
mm
125
125
120
Depth
mm
140
140
110
1/N/PE~230 50 Hz
Technical Data
V
1/N~230 50 Hz
1/N~230 50 Hz
Output
Power connection
W
1200
1800
600
Output stages
W
600-1200
600-1200-1800
600
Permanent connection
Permanent connection
Plug
IP 24
IP 24
IP 24
Connection type
Type of protection
5,1
Weight
Available
kg
1.55
2.1
1.2
from May 2015
from May 2015
from June 2015
IWQ 121/181 covering box 4 Items; Palett 24 items. IWQ 60 covering box 6 items; Palett 20 items
5,2
106
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
DIRECT HEATERS
ELECTRIC MIRROR HEATERS
Area of use
Installation
• The electric mirror heater prevents the
mirror surface from fogging over after a
shower in the bathroom
• The electric mirror heater can be used
with all mirrors in commercial and private
bathrooms
• The heating element is stuck directly to the
rear of the mirror or the wall behind the
mirror using the double-sided adhesive
tapes provided
• To save energy, the electric connection
should use a brief timer. The mirror heater
can however also be connected to the
lighting
Components
1.1
1.2
1.3
1.4
• The mirror heater consists of an aluminiumcoated heating element for good heat
transfer
• The mirror heater is connected to an
appropriate power circuit using a 2-wire
connection cable
Installation of electric mirror heater
• Before installation, plan positioning accurately as the mirror will only remain clear if
positioned near the heating element
• Fit mirror heater directly to rear of mirror or
on the wall behind the mirror (only if the
mirror does not project too far from the wall)
1.5
• The aluminium-coated side must face the
mirror
• Do not cut or drill through heating element,
the sticking surface must be free of dirt and
oil
Connection cable
Mounting to mirror
or spacer
Rear of mirror
2.1
2.2
Mirror heater
Double-sided
adhesive strips
(included in delivery)
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
107
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
ELECTRIC MIRROR HEATERS
ELECTRIC MIRROR HEATER SPH
1.1
• The electric mirror heater prevents the mirror
surface from fogging over after a shower in
the bathroom
• Can be used with all mirrors in commercial
and private bathrooms
1.2
1.3
• With aluminium coating for rapid transfer of
heat
• Simple to fit, with adhesive strips supplied
• Supply cable approx. 1.5 m for permanent
connection
SPH 110
1.4
1.5
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
Model
4.2
EAN
E-Number
4.3
4,4
223 246
223 247
Width
mm
450
750
Height
mm
500
600
Depth
mm
1.5
1.5
1/N~230 50 Hz
Technical Data
V
1/N~230 50 Hz
Connected load
W
50
110
Weight
kg
0.165
0.325
SPH 50 Palett: 200 items; SPH 110 Palett: 202 items
5,2
SPH 110
40 41056 02347 2
Dimensions
Power connection
5,1
SPH 50
40 41056 02346 5
108
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
DIRECT HEATERS
HAND DRYERS
Area of use
Installation
• Electric hand dryers are used wherever
maximum hygiene and economic viability
are the order of the day
• Hand dryers for toilet areas in restaurants
and commercial ventures
• One electric connection with a 10 A or 16 A
fuse is all that is needed for operation
• Innovative installation concept with
integrated wall bracket
1.1
1.2
1.3
Components
• Quick drying which is kind on the skin using
a powerful blower
• Hygienic, zero-contact switching on and off
using infrared sensor technology
Comparison of various hand-drying systems
If a comparison is made between various handdrying systems, electric hand dryers are clearly
the superior choice.
1.4
1.5
405
The units do not have to be continually
replenished, do not produce any waste and
require no maintenance.
286
2.1
Source: ipi-Institut für Produktforschung und
Information GmbH, Esslingen, Germany
2.2
24
77
20
Energy [W/h]
2.3
0
Waste water [ml]
2.4
Electric hand dryer
Paper hand towel
2.5
Textile hand towel
2.6
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4,4
5,1
109
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
DIRECT HEATERS
HAND DRYERS
HAND DRYERS HE
1.1
1.2
1.3
HE 260 TM
• Hygienic drying system in a modern design
• Ecological and economical; saves energy
and raw materials
• Turbo blower for particularly fast drying
• Robust metal housing
• Zero-contact switching on and off using
infrared sensor technology
• Innovative installation concept
• Type of protection IP 23, splash protection
• Protection class II
HE 260 T
• Hygienic drying system in a modern design
• Ecological and economical; saves energy
and raw materials
• Turbo blower for particularly fast drying
• Zero-contact switching on and off using
infrared sensor technology
• Innovative installation concept
• Type of protection IP 23, splash protection
• Protection class II
1.4
HE 260 TM
1.5
HE 260 T
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
3.4
4.1
Model
EAN
E-Number
4.2
5,1
187 928
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
2.6
2.6
db(A)
68
68
m3/h
250
250
Infrared proximity switch
•
•
Turbo blower
•
•
Plastic housing / colour
–
white
Operating noise
V
Metal housing / colour
Weight
Palett: 60 items
5,2
187 929
kW
Output
Air flow rate
4,4
HE 260 T
40 41056 01558 3
Technical Data
Power connection
4.3
HE 260 TM
40 41056 01559 0
110
kg
white
–
4.2
2.7
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
INFRARED SHORT-WAVE RADIANT HEATERS
Area of use
• Infrared short-wave radiant heaters for use
indoors and out
• Immediate heat within 1 second, no
preheating
• No heat loss and very high radiation
effectiveness thanks to IR short wave A with
penetration which heats the body directly.
This is different to medium and long waves
which heat the ambient air
• No CO2 + NOX emissions, therefore
well-suited to indoor use
• No noise or odours
• IR short-wave radiant heaters are used
outdoors in catering, the hotel trade,
commerce, industry, halls and workplaces,
public buildings and by private users for
terraces, balconies, gardens, conservatories, camping, outbuildings, garages and
workshops
Components
• High-quality, sophisticated design
• Output can be set in levels or in a continuously variable manner using special
accessories
• Effective, targeted and immediate warmth
in 1 second thanks to infrared short-wave
technology, IR short wave A (1200 nm)
• Targeted warmth can be adjusted using
reflectors
• Output range of between 1.5 and 6 kW.
Other outputs can be combined
• Shock-resistant, high-efficiency, high-quality
gold pipe
• No maintenance required, long service life
of the gold pipes: up to 5000 hours
• Golden quartz tubes for high impact
resistance
• Special accessories include dimmer (cabled
or wireless version)
• The IR short-wave radiators are made from
stainless material alone and can therefore
be subject to normal ambient influences
1.1
1.2
1.3
1.4
Heat spread at ambient temperature::
20°C, Spacing: ~ 2.0 m – Before
1.5
Installation
• A retaining bracket is supplied with the
infrared short-wave radiators for fitting on a
wall or ceiling
• An angular adjustment of around 100° is
possible on the radiator. The recommended setting from the wall is max. 45°
• Electric connection depends on model,
either plug-in or permanent connection
• The short-wave radiant heater with a
Hirschmann plug is wired up to the power
supply using two split connection cables,
linked using a Hirschmann coupling and
plug
• Installation height ≥ 2.1 m
2.1
Heat spread at ambient temperature::
20°C, Spacing: ~ 2.0 m – After: After approx. 30 seconds
IR short waves mainly heat objects, not the surrounding
environment
2.2
2.3
Wave lengths of infrared heat radiation A, B, C
2.4
IR-A short wave (radiant heat)
2.5
IR Premium
IR-B medium wave (radiant heat)
2.6
IWQ
IR-C long wave (radiant heat)
Natural stone heating
0,7
IR-A
1,4
IR-B
3
IR-C 7
9
3.1
Heating area (S)
Standard values for the heated area at a tilting
angle of 45°
(Temperature subject to distance from
radiant heater  T approx. 5 K - 30 K).
3.2
3.3
Wave length details in µm
3.4
Model
IP class
Location of use
Height
Dimension of heating
H
A
B
C
S
m
m
m
m
m2
IR Premium 1650
IP 67
unprotected outdoor
2.1
2.7
2.6
4.9
10.1
IR Premium 2000 | W / A
IP 67
unprotected outdoor
2.5
3.2
3.0
5.8
14.1
IR Premium 2000 H | W / A
IP 67
unprotected outdoor
2.5
3.2
3.0
5.8
14.1
IR Premium 2000 IP 44
IP 44
protected outdoor
2.5
3.2
3.0
5.8
14.1
IR Premium 2000 IP 44 W / A
IP 44
protected outdoor
2.5
3.2
3.0
5.8
14.1
IR Premium Plus 1650
IP 65
unprotected outdoor
2.1
2.7
2.6
4.9
10.1
IR Premium Plus 2000
IP 65
unprotected outdoor
2.5
3.2
3.0
5.8
14.1
IR Comfort 1520
IP 20
indoor
2.1
2.7
2.6
4.9
10.1
IR Comfort 2020
IP 20
indoor
2.5
3.2
3.0
5.8
14.1
IR Comfort 2024
IP 24
protected outdoor
2.5
3.2
3.0
5.8
14.1
IR Comfort 2024 H
IP 24
protected outdoor
2.5
3.2
3.0
5.8
14.1
IR Comfort 3024
IP 24
protected outdoor
3.5
4.1
4.3
8.4
25.4
4.1
4.2
4.3
4,4
5,1
111
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
INFRARED SHORT-WAVE RADIANT HEATERS
IR PREMIUM
1.1
1.3
IR Premium 2000
1.4
STAR
A·W·A·R·D 2010
1.5
• Power cable with safety plug
• Connection: 1/N/PE~230 V 50 Hz
• IR Premium 2000 H: The unit is wired up to
the power supply with a split power cable
with safety plug, connected by a Hirschmann
coupler and plug, when using with special
power control accessories, an IR wireless
dimmer 2000 and IR 3-level wireless unit are
required
• Protection class I
• Color: aluminium (silver)
• Shock-resistant, high-efficiency, high-quality
gold pipe
• The special accessories for the radiant
heaters include (wireless) dimmers
• Practical information: 2 IR Premium 1650
units with 16 A delay fuse
• Distance from wall with wall bracket: 90 mm
• High-quality, sophisticated design
• The short-wave radiant heater is made
entirely from non-rusting material and can
therefore be subjected to normal
environmental influences
• Effective, targeted and immediate heat after
1 second
• The IR short-wave radiant heaters of 2000 W
can be installed horizontally or vertically –
“Vertical Burn” gold pipe
•IR Premium 1650 for horizontal installation
• Thermal radiation in infrared range A, shortwave infrared with a power consumption of
1650 W / 2000 W
• IP 67: Protection against intermittent immersion; IR Premium 2000 H: IP 54: All-round
splashproof
• Depending on installation, fitting and orientation, an area of around 8 – 10 m²
(1650 W) or 10 – 12 m² (2000 W) is supplied
with thermal radiation
1.2
2.1
≥ 400
2.2
≥ 200
100
≥ 200
2.3
≥
240
≥ 2100
00
15
2.4
2.5
2.6
335
3.1
605
Dimensions in mm
3.2
3.3
Model
IR Premium 1650
IR Premium 2000
IR Premium 2000 H
EAN
40 41056 02661 9
40 41056 02662 6
40 41056 02663 3
229 944
229 945
229 946
Indoor and outdoor use
Indoor and outdoor use
Indoor and outdoor use
horizontal
horizontal and vertical
horizontal and vertical
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
Output
W
1650
2000
2000
Connected load
W
1650
2000
2000
Power consumption
A
7.0
8.5
8.5
A
16 delay fuse/
C automatic fuse
16 delay fuse/
C automatic fuse
16 delay fuse/
C automatic fuse
E-Number
3.4
Technical Data
Use
Installation
4.1
4.2
4.3
Power connection
Fuse protection
Area radiated
m²
8 to 10
10 to 12
10 to 12
Infrared range
nm
IR -A (1200)
IR -A (1200)
IR -A (1200)
Type of protection
4,4
5,1
IP 67
IP 67
IP 54
Height
mm
100
100
100
Width
mm
605
605
605
Depth without bracket
mm
80
80
80
kg
2.5
2.5
2.5
Aluminium (silver)
Aluminium (silver)
Aluminium (silver)
Weight
Color
Palett: 66 items · IR Premium 1650 while stocks last
5,2
112
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
INFRARED SHORT-WAVE RADIANT HEATERS
IR PREMIUM (COLOR) – NEW –
• High-quality, sophisticated design
• The short-wave radiant heater is made
entirely from non-rusting material and can
therefore be subjected to normal
environmental influences
• For unprotected outdoor use
• Effective, targeted and immediate heat after
1 second
• The IR short-wave radiant heaters of 2000 W
can be installed horizontally or vertically –
“Vertical Burn” gold pipe
• Thermal radiation in infrared range A, shortwave infrared with a power consumption of
2000 W
• IP 67: Protection against intermittent immersion; IR Premium 2000 H: IP 54: All-round
splashproof
• Depending on installation, fitting and
orientation, an area of around 10 – 12 m2 is
supplied with thermal radiation
1.1
• Power cable with safety plug
• Connection: 1/N/PE~230 V 50 Hz
• IR Premium 2000 H: The unit is wired up to
the power supply with a split power cable
with safety plug, connected by a Hirschmann
coupler and plug, when using with special
power control accessories, an IR wireless
dimmer 2000 and IR 3-level wireless unit are
required
• Protection class I
• Color: aluminium (silver) and white
• Shock-resistant, high-efficiency, high-quality
gold pipe
• The special accessories for the radiant
heaters include (wireless) dimmers
• Distance from wall with wall bracket: 90 mm
1.2
IR Premium 2000 W
1.3
1.4
IR Premium 2000 A
1.5
2.1
Special colours (RAL) on request, available at additional cost. Contact your AEG sales representative.
≥ 400
2.2
≥ 200
100
≥ 200
≥
240
2.3
≥ 2100
00
15
2.4
2.5
335
Illustration shows a similar model; colour not representational.
* Offset printing cannot accurately represent RAL colours. Please select
your preferred colour from the current RAL swatches
2.6
3.1
605
Dimensions in mm
3.2
Model
EAN
E-Number
IR Premium 2000 W
IR Premium 2000 A
IR Premium 2000 H W
IR Premium 2000 H A
40 41056 03209 2
40 41056 03210 8
40 41056 03211 5
40 41056 03212 2
234 786
234 787
234 788
234 789
Indoor and outdoor use
Indoor and outdoor use
Indoor and outdoor use
Indoor and outdoor use
horizontal and vertical
horizontal and vertical
horizontal and vertical
horizontal and vertical
1/N/PE~230 50 Hz
3.3
Technical Data
Use
Installation
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
Output
Power connection
W
2000
2000
2000
2000
Connected load
W
2000
2000
2000
2000
Power consumption
A
8.5
8.5
8.5
8.5
A
16 delay fuse/
C automatic fuse
16 delay fuse/
C automatic fuse
16 delay fuse/
C automatic fuse
16 delay fuse/
C automatic fuse
Fuse protection
Area radiated (max.)
m2
10 - 12
10 - 12
10 - 12
10 - 12
Infrared range
nm
IR -A (1200)
IR -A (1200)
IR -A (1200)
IR -A (1200)
IP 67
IP 67
IP 54
IP 54
Type of protection
Height
mm
100
100
100
100
Width
mm
605
605
605
605
Depth without bracket
mm
80
80
80
80
Weight
kg
Color
2.5
2.5
2.5
2.5
Aluminium (white)
Aluminium (anthracite)
Aluminium (white)
Aluminium (anthracite)
3.4
4.1
4.2
4.3
4,4
5,1
Palett: 66 Items · Available from May 2015
113
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
INFRARED SHORT-WAVE RADIANT HEATERS
IR PREMIUM IP 44 – NEW –
1.1
• High-quality, sophisticated design
• The short-wave radiant heater is made
entirely from non-rusting material and can
therefore be subjected to normal
environmental influences
• For protected outdoor use
• Effective, targeted and immediate heat after
1 second
• The IR short-wave radiant heaters of 2000 W
can be installed horizontally or vertically –
“Vertical Burn” gold pipe
1.2
1.3
IR Premium 2000 IP 44
1.4
1.5
• Thermal radiation in infrared range A, shortwave infrared with a power consumption of
2000 W
• IP 44: All-round splashproof
• Depending on installation, fitting and
orientation, an area of around 10 – 12 m2 is
supplied with thermal radiation
• Power cable with safety plug
• Connection: 1/N/PE~230 V 50 Hz
• Shock-resistant, high-efficiency, high-quality
gold pipe
• Distance from wall with wall bracket: 90 mm
• Color: Aluminium (silver)
• Width 500 mm
IR PREMIUM IP 44 W / IR PREMIUM IP 44 A – NEW –
• High-quality, sophisticated design
• The short-wave radiant heater is made
entirely from non-rusting material and can
therefore be subjected to normal
environmental influences
• For protected outdoor use
• Effective, targeted and immediate heat after
1 second
• The IR short-wave radiant heaters of 2000 W
can be installed horizontally or vertically –
“Vertical Burn” gold pipe
2.1
IR Premium 2000 IP 44 W
2.2
2.3
IR Premium 2000 IP 44 A
2.4
• Thermal radiation in infrared range A, shortwave infrared with a power consumption of
2000 W
• IP 44: All-round splashproof
• Depending on installation, fitting and
orientation, an area of around 10 – 12 m2 is
supplied with thermal radiation
• Power cable with safety plug
• Connection: 1/N/PE~230 V 50 Hz
• Shock-resistant, high-efficiency, high-quality
gold pipe
• Distance from wall with wall bracket: 90 mm
• Color: White or anthracite
• Width: 460 mm
2.5
2.6
3.1
3.2
3.3
Model
IR Premium 2000 IP 44
IR Premium 2000 IP 44 W
IR Premium 2000 IP 44 A
40 41056 03213 9
40 41056 03214 6
40 41056 03215 3
234 790
234 791
234 792
Indoor and protected outdoor use
Indoor and protected outdoor use
Indoor and protected outdoor use
horizontal and vertical
horizontal and vertical
horizontal and vertical
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
Output
W
2000
2000
2000
Connected load
W
2000
2000
2000
Power consumption
A
8.5
8.5
8.5
A
16 delay fuse/
C automatic fuse
16 delay fuse/
C automatic fuse
16 delay fuse/
C automatic fuse
EAN
E-Number
3.4
Technical Data
Use
Installation
4.1
4.2
4.3
Power connection
Fuse protection
Area radiated (max.)
m2
10 - 12
10 - 12
10 - 12
Infrared range
nm
IR -A (1200)
IR -A (1200)
IR -A (1200)
IP 44
Type of protection
4,4
5,1
IP 44
IP 44
Height
mm
100
100
100
Width
mm
510
460
460
Depth without bracket
mm
80
80
80
Silver
White
Anthracite
Weight
kg
Color
Palett: 66 Items · Available from August 2015
5,2
114
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
INFRARED SHORT-WAVE RADIANT HEATERS
IR PREMIUM PLUS
1.1
• High-quality, sophisticated design
• The IR Premium Plus is a combined heat and
light unit with rotating spotlights
• The short-wave radiant heater is made
entirely from non-rusting material and can
therefore be subjected to normal environmental influences
• Rotating spotlights with an individual rating
of 50 W each
• Effective, targeted and immediate heat after
1 second
• Horizontal installation only
• Thermal radiation in infrared range A, shortwave infrared with a power consumption of
1650 W / 2000 W
• Pleasant white light effect
• Jet water protection IP 65
• Depending on installation, fitting and
orientation, an area of around 8 – 10 m² (1500
W) or 10 – 12 m² (2000 W) is supplied with
thermal radiation
• Power cable with permanent connection
(5-core)
• Connection: 1/N/PE~230 V 50 Hz
• Power cable for direct connection
• Protection class I
• Color: Aluminium (silver)
• Shock-resistant, high-efficiency, high-quality
gold pipe
• Practical information: 2 IR Premium Plus 1650
units with 16 A delay fuse
• Distance from wall with wall bracket: 90 mm
1.2
IR Premium Plus 1650/2000
1.3
1.4
1.5
2.1
≥ 400
2.2
≥ 200
100
≥ 200
2.3
≥
00
15
≥ 2100
2.4
2.5
2.6
3.1
Dimensions in mm
690
3.2
Model
EAN
E-Number
IR Premium Plus 1650
IR Premium Plus 2000
40 41056 02664 0
40 41056 02665 7
229 947
229 948
Indoor and protected outdoor use
Indoor and protected outdoor use
3.3
3.4
Technical Data
Use
Installation
horizontal
horizontal
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
Output
W
1650
2000
Connected load
W
1750
2100
Power consumption
A
7.5
9.0
Fuse protection
A
16 delay fuse
16 delay fuse
Power connection
Area radiated (max.)
m²
8 to 10
10 to 12
Infrared range
nm
IR -A (1200)
IR -A (1200)
IP 65
IP 65
Type of protection
Height
mm
100
100
Width
mm
820
820
Depth without bracket
mm
80
80
Weight
Color
kg
3.6
3.6
Aluminium (silver)
Aluminium (silver)
4.1
4.2
4.3
4,4
5,1
Palett: 50 items · while stocks last
115
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
INFRARED SHORT-WAVE RADIANT HEATERS
IR PREMIUM 6000 TOWER
1.1
• High-quality, sophisticated design
• The short-wave radiant heater is made
entirely from non-rusting material and can
therefore be subjected to normal
environmental influences
• Effective, targeted and immediate heat after
1 second
• The IR Premium Tower 6000 is a solid upright
unit, featuring 3 individual heaters of the
IR Premium 2000 type with “Vertical Burn”
pipes, fitted at the top end
• The unit is particularly well suited to
providing heat for standing and seated
guests in restaurants and hotels
• With large base plate for good stability
• The IR Premium 6000 Tower can be installed
in indoor and outdoor areas, but must always
be anchored to the floor with screws for
safety
1.2
1.3
1.4
1.5
• Thermal radiation in infrared range A, shortwave infrared with a power consumption of
3 x 2000 W
• Depending on installation, fitting and
orientation, the IR Premium 6000 Tower supplies around 30 –36 m² with thermal radiation
• Jet water protection IP 65
• The unit is wired up to the power supply
using a 5-core power cable, for connecting
to 3-phase current with a 16 or 32 A fuse,
8m
• Connection: 3/N/PE~400 V 50 Hz
• Protection class I
• Color: aluminium (silver)
• Shock-resistant, high-efficiency, high-quality
gold pipes
• Tower dimensions: Ø approx. 130 cm,
height between 250 – 270 cm
2.1
2.2
2.3
2.4
2.5
IR Premium 6000 Tower
2.6
3.1
3.2
3.3
Model
IR Premium 6000 Tower
EAN
40 41056 02667 1
E-Number
3.4
229 950
Technical Data
Use
Indoor and outdoor use
Installation
4.1
4.2
4.3
Power connection
vertical
V
3/N/PE~400 50 Hz
Output
W
3 x 2000
Connected load
W
6000
Power consumption
A
25.5
Fuse protection
A
3 x 16 delay fuse/C automatic fuse
Area radiated (max.)
m²
30 to 36
Infrared range
nm
IR -A (1200)
Type of protection
4,4
5,1
mm
2700
Width
mm
1300
Depth without bracket
mm
1300
kg
45.00
Weight
Color
Palett: 4 items · while stocks last
5,2
IP 65
Height
116
Aluminium (silver)
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
INFRARED SHORT-WAVE RADIANT HEATERS
IR COMFORT FOR OUTDOOR USE
• High-quality, painted aluminium housing
• Effective, targeted and immediate heat after
1 second
• Thermal radiation in infrared range A,
short-wave infrared with a power
consumption of 2000 W
• Can be used indoors and outdoors
• Pleasant white light effect
• IP 24: All-round splashproof
• Depending on installation, fitting and
orientation, an area of around 10 – 12 m²
(2000 W) is supplied with thermal radiation
• Horizontal installation
• Power cable with safety plug, 3 m
• Connection: 1/N/PE~230 V 50 Hz
1.1
•IR Comfort 2024 H: The unit is wired up to
the power supply with a split power cable
with safety plug, connected by a Hirschmann
coupler and plug. When using with special
power control accessories, an IR wireless
dimmer 2000 and IR 3-level wireless unit are
required
• Protection class I
• Color: similar to RAL 9010
• Hana gold pipe
• The special accessories for the radiant
heater IR Comfort 2024 H include IR (wireless)
dimmers
• Test mark: TÜV/GS
1.2
1.3
IR Comfort 2024
1.4
TÜV
TÜV Rheinland
geprüfte
Sicherheit
1.5
≥ 400
2.1
≥ 200
2.3
140
≥ 200
2.2
≥
00
≥ 2100
15
2.4
2.5
2.6
3.1
395
Dimensions in mm
480
3.2
Model
IR Comfort 2024
IR Comfort 2024 H
EAN
40 41056 02671 8
40 41056 02672 5
229 954
229 955
Indoor and outdoor use
Indoor and outdoor use
E-Number
3.3
3.4
Technical Data
Use
Installation
horizontal
horizontal
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
Output
W
2000
2000
Connected load
W
2000
2000
Power consumption
A
8.5
8.5
Fuse protection
A
16 delay fuse/C automatic fuse
16 delay fuse/C automatic fuse
Power connection
Area radiated (max.)
m²
10 to 12
10 to 12
Infrared range
nm
IR -A (1200)
IR -A (1200)
IP 24
IP 24
Type of protection
Height
mm
145
145
Width
mm
480
480
Depth without bracket
mm
110
110
Weight
Color
kg
2.5
2.5
white (similar to RAL 9010)
white (similar to RAL 9010)
4.1
4.2
4.3
4,4
5,1
Palett: 64 items
117
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
INFRARED SHORT-WAVE RADIANT HEATERS
IR COMFORT
1.1
• High-quality, painted aluminium housing
• Effective, targeted and immediate heat after
1 second
• Thermal radiation in infrared range A,
short-wave infrared with a power
consumption of 2 x 1500 W
• Can be used indoors and protected outdoors
• Pleasant white light effect
• IP 24: All-round splashproof
• Depending on installation, fitting and
orientation, an area of around 16 – 20 m²
(2 x 1500 W) is supplied with thermal
radiation
1.2
1.3
IR Comfort 3024
1.4
1.5
TÜV Rheinland
geprüfte
Sicherheit
TÜV
• Horizontal installation
• Power cable with safety plug, 3 m
• Connection: 1/N/PE~230 V 50 Hz or
3/N/PE 400 V 50 Hz
• Protection class I
• Color: similar to RAL 9010
• Hana gold pipe
• The special accessories for the radiant
heaters include IR dimmers
• Test mark: TÜV/GS
• Distance from wall with wall bracket: 105 mm
2.1
≥ 400
2.2
2.3
≥ 200
≥ 200
2.5
14
2.6
3.1
980
Dimensions in mm
3.2
3.3
Model
IR Comfort 3024
EAN
40 41056 02673 2
E-Number
3.4
229 956
Technical Data
Use
Indoor and outdoor use
Installation
4.1
4.2
4.3
Power connection
horizontal
V
1/N/PE~230 50 Hz
Output
W
2 x 1500
Connected load
W
3000
Power consumption
A
12.8
Fuse protection
A
16 delay fuse/C automatic fuse
Area radiated (max.)
m²
16 to 20
Infrared range
nm
IR -A (1200)
Type of protection
4,4
5,1
mm
145
Width
mm
980
Depth without bracket
mm
110
Color
Palett: 23 items · while stocks last
5,2
IP 24
Height
Weight
118
kg
≥
5
≥ 2100
2.4
5.5
white (similar to RAL 9010)
15
00
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
INFRARED SHORT-WAVE RADIANT HEATERS
IR COMFORT FOR INDOOR USE
• High-quality, painted aluminium housing
• Effective, targeted and immediate heat after
1 second
• Thermal radiation in infrared range A,
short-wave infrared with a power
consumption of 1500 W / 2000 W
• Can be used indoors
• Pleasant white light effect
• Depending on installation, fitting and
orientation, an area of around 8 – 10 m²
1500 W) or 10 –12 m² (2000 W) is supplied
with thermal radiation
1.1
• Horizontal installation
• Power cable with safety plug, 3 m
• Protection class I
• Color: similar to RAL 9010
• Hana gold pipe
• The special accessories for the radiant
heaters include IR dimmers
• Practical information: 2 IR Comfort 1520 units
with 16 A delay fuse
• Test mark: TÜV/GS
• Distance from wall with wall bracket: 105 mm
1.2
1.3
IR Comfort 1520
1.4
TÜV
TÜV Rheinland
geprüfte
Sicherheit
1.5
2.1
≥ 400
2.2
2.3
≥ 200
140
≥ 200
≥
2.4
00
≥ 2100
15
2.5
2.6
3.1
Dimensions in mm
395
3.2
Model
IR Comfort 1520
IR Comfort 2020
EAN
40 41056 02668 8
40 41056 02669 5
229 951
229 952
Indoor and outdoor use
Indoor and outdoor use
E-Number
3.3
3.4
Technical Data
Use
Installation
horizontal
horizontal
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
Output
W
1500
2000
Connected load
W
1500
2000
Power consumption
A
6.5
8.5
Fuse protection
A
16 delay fuse
16 delay fuse
Power connection
Area radiated (max.)
m²
8 to 10
10 to 12
Infrared range
nm
IR -A (1200)
IR -A (1200)
IP 20
IP 20
Type of protection
Height
mm
145
145
Width
mm
395
395
Depth without bracket
mm
110
110
Weight
kg
Color
2.5
2.5
white (similar to RAL 9010)
white (similar to RAL 9010)
4.1
4.2
4.3
4,4
5,1
Palett: 88 items · IR Comfort 1520 while stocks last
119
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
INFRARED SHORT-WAVE RADIANT HEATERS
IR CERAMICS – NEW –
1.1
• High-quality, painted aluminium housing
• Thermal radiation in infrared range C with a
power consumption of 1300 W
• Can be used indoors
• No light emission
1.2
1.3
IR Keramik 1300 W
• Suitable for rooms up to 20 m2
(Heating up time is around 5 - 10 minutes)
• Horizontal installation
• Colors: White, Black
• Power cable with safety plug,
Length of power cable: 1.90 m
1.4
1.5
IR Keramik 1300 W
2.1
2.2
2.3
2.4
2.5
2.6
3.1
3.2
3.3
Model
IR Keramik 1300 W
IR Keramik 1300 S
40 41056 03216 0
40 41056 03217 7
234 793
234 794
Use
Indoor use
Indoor use
Installation
horizontal
horizontal
V
1/N/PE~230 50 Hz
1/N/PE~230 50 Hz
Output
W
1300
1300
Power consumption
A
5.7
5.7
Fuse protection
A
10
10
Area radiated (max.)
m2
20
20
Infrared range
nm
IR-C 3 - 9 µm
IR-C 3 - 9 µm
IP 20
IP 20
EAN
3.4
E-Number
Technical Data
4.1
Power connection
4.2
4.3
Type of protection
4,4
5,1
Height
mm
120
120
Width
mm
610
610
Depth without bracket
mm
155
155
kg
2.3
2.3
White
Black
Weight
Color
Palett: 66 Items · Available from August 2015
5,2
120
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
ACCESSORIES FOR INFRARED SHORT-WAVE RADIANT HEATERS
IR PREMIUM AND IR COMFORT
SAFETY OUTPUT CONTROLLER
FOR SHORT-WAVE INFRARED RADIANT HEATERS
• Output controller to regulate the heat
intensity of short-wave infrared radiant
heaters – the optimum accessory for all
short-wave infrared radiant heaters with a
maximum output of up to 3600 W
• Output controller with wave pulse packet
control
• With 4 levels (0%, 33%, 66% and 100%)
• Fitted with a separate Schuko socket as
power output for easier use
• Power cable with safety plug, for connecting
with socket as power input
• As it features IP 20 protection, the output
controller may only be used in dry indoor
areas
1.1
• The output controller consists of a housing
with a switch and rotary controller for
selecting a zone
• Dimensions: 110x117x170 mm (WxHxD)
• Weight: 1.6 kg
• The output controller requires no maintenance
• The output controller enables power to be
saved in proportion to the selected output
level
• Connection: 1/N/PE~230 V 50 Hz
• Color: silver
•Meets all general requirements of the
EMC Directive
Model
1.2
1.3
1.4
IR dimmer 3600 S safety
1.5
IR dimmer 3600 S safety
EAN
40 41056 02677 0
E-Number
229 960
Components
with socket, silver
2.1
Palett: 44 items · while stocks last
2.2
2.3
2.4
2.5
2.6
3.1
OUTPUT CONTROLLER
FOR SHORT-WAVE INFRARED RADIANT HEATERS
• Output controller to regulate the heat
intensity of short-wave infrared radiant
heaters – the optimum accessory for all
short-wave infrared radiant heaters with a
maximum output of up to 3600 W
• Output controller with wave pulse packet
control
• With 4 levels (0%, 33%, 66% and 100%)
• The IR dimmer 3601 is a permanently
installed dimmer with terminals for power
input and output
3.2
• As it features IP 20 protection, the output
controller may only be used in dry indoor
areas
• The output controller consists of a housing
with a switch and rotary controller for setting
a total of 1 zone
• Dimensions: 110x117x170 mm (WxHxD)
• Weight: 1.3 kg
• Connection: 1/N/PE~230 V 50 Hz
• The output controller enables power to be
saved in proportion to the selected output
level
•Meets all general requirements of the
EMC Directive
3.3
3.4
4.1
IR dimmer 3601
4.2
4.3
Model
IR dimmer 3601
EAN
40 41056 02678 7
E-Number
Components
4,4
229 961
5,1
dimmer 3600 W for infrared radiant heaters for 1 zone
Palett: 100 items · while stocks last
121
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
ACCESSORIES FOR INFRARED SHORT-WAVE RADIANT HEATERS
IR PREMIUM AND IR COMFORT
WIRELESS OUTPUT CONTROLLER
FOR SHORT-WAVE INFRARED RADIANT HEATERS
1.1
1.2
1.3
1.4
IR wireless dimmer 2000
1.5
• The bidirectional IR wireless output controller
2000 regulates output at 4 levels (0% / 50%
/ 75% / 100%) up to a maximum capacity of
2000 W
• Output controller with wave pulse packet
control
• The IR wireless output controller 2000 should
be fitted in the cable run using a Hirschmann
coupler and plug. It is switched using a wireless remote control available separately.
The wireless frequency is 868.3 MHz
• The output controller consists of a housing
with cooling fins and exterior antenna, as well
as 2 power cables fitted with Hirschmann
plug and coupler for power input and output
Model
IR wireless dimmer 2000
EAN
40 41056 02681 7
E-Number
2.1
• The output controller has a Hirschmann plug
and coupler (STAK 3, STAS 3) which can be
easily plugged in to cable runs fitted with
Hirschmann components
• Dimensions: 105x33x30 mm (WxHxD)
• The output controller enables power to be
saved in proportion to the selected output
level
• IP rating: IP 54
•Meets all general requirements of the
EMC Directive
229 964
Components
Wireless dimmer 2000 W
Palett: 200 items
2.2
2.3
2.4
2.5
2.6
3.1
WIRELESS REMOTE CONTROL FOR WIRELESS DIMMERS
3.2
3.3
3.4
4.1
IR Funk W
IR Funk S
• The bidirectional IR wireless remote control
is needed to switch the IR wireless dimmer
2000 from a distance of up to 20 m in
buildings and up to 200 m in the open
• The wireless remote control can be
programmed to a number of wireless
dimmers
• The wireless frequency is 868.3 MHz
• The wireless remote control has 3 switches
on the front and an LED for providing
information on wireless transmission
• A wall bracket to place the remote control in
is also provided as standard
• IP rating: IP 20, suited for indoor use
• Color: IR Funk W (white), IR Funk S
(silver/black)
• Dimensions: 75 x 44 x 15 mm (WxHxD)
• Wall bracket dimensions:
85 x 85 x 18 mm (WxHxD)
• Battery: 1 x CR2032 3V (coin cell)
4.2
4.3
4,4
Model
EAN
5,1
E-Number
Components
Palett: 150 items
5,2
122
IR Funk W
IR Funk S
40 41056 02682 4
40 41056 02683 1
229 965
229 966
Remote control, white
Remote control, silver/black
NO-FROST
FLOOR WARMING SYSTEMS
WATER HEATERS
SPACE HEATERS
ACCESSORIES FOR INFRARED SHORT-WAVE RADIANT HEATERS
IR PREMIUM AND IR COMFORT
MULTI WIRELESS REMOTE CONTROL
FOR SHORT-WAVE INFRARED RADIANT HEATERS
• The bidirectional IR wireless multi is needed
to switch the IR wireless dimmer 2000 from a
distance of up to 300 m in the open
• The wireless remote control can be
programmed to a number of IR wireless
dimmers and has 5 channels which allow up
to 5 dimmer groups to be switched individually
• The wireless remote control has 3 buttons for
selecting power and one button and LEDs
for channel selection on the front. It also
features an LED which provides information
about wireless transmission.
1.1
• A wall bracket to place the remote control in
is also provided as standard.
• As it features IP 20 protection, the remote
control is only suited to indoor use
• The wireless frequency is 868.3 MHz
• Dimensions: 121x43x23 mm (WxHxD)
• Wall bracket is supplied too
• Battery: 2 x AAA micro
• Color: white
1.2
1.3
1.4
IR Funk Multi BiDi
1.5
Model
IR Funk Multi BiDi
EAN
40 41056 02962 7
E-Number
232 906
Components
Multi wireless remote control
Palett: 100 items
2.1
GOLD PIPES FOR SHORT-WAVE INFRARED RADIANT HEATERS
• High-quality gold pipe
• Shock-resistant
2.2
• High-efficiency with short-wave infrared A
(1200 nm)
• Long service life: up to 5000 operating hours
2.3
IR Quality gold pipe
2.4
2.5
Model
EAN
E-Number
Components
ESR 1650
ESR 2000 IP 44
ESR 2000 IP 67
ESR 1520
ESR 2020
ESR 2024
ESR 2000 CL
40 41056 02685 5
40 41056 03218 4
40 41056 03219 1
40 41056 02689 3
40 41056 02690 9
40 41056 02691 6
40 41056 02935 1
229 970
234 795
234 798
229 974
229 975
229 977
232 882
2.6
Goldpipe for
IR Premium 1650
IR Premium 1650 plus
Goldpipe for
IR Premium IP 44
Goldpipe for
IR Premium 2000,
IR Premium 2000 H,
IR Premium Plus 2000,
IR Premium 6000 Tower
Goldpipe for
IR Comfort 1520
Goldpipe for
IR Comfort 2020
Goldpipe for
IR Comfort 2024,
IR Comfort 2024 H,
IR Comfort 6024
Quality Goldpipe for
IR Premium 2000,
IR Premium 2000 CL (H)
3.1
3.2
IR BAR TYPE CLIP
FOR SHORT-WAVE INFRARED RADIANT HEATERS
3.3
• Allows short-wave infrared radiant heaters
to be installed horizontally or vertically on
parasol ribs using a screw and turning knob
• Made of curved steel – glued-in rubber parts
improve hold and slip resistance on the clips
3.4
• Can be easily fitted and removed using the
screw and turning knob
• Dimensions: 90x45x20 mm (WxHxD)
• Color: white
4.1
4.2
IR bar-type clip
4.3
Model
IR bar-type clip
EAN
40 41056 02693 0
E-Number
Components
4,4
229 968
5,1
Bar-type clip
Palett: 100 items
123
5,2
WATER HEATERS
SPACE HEATERS
FLOOR WARMING SYSTEMS
NO-FROST
TERMS AND CONDITIONS OF DELIVERY AND PAYMENT
FOR COMMERCIAL COURSE OF BUSINESS ABROAD
1. Applicability
1.1. All our supplies – also in the future – exclusively take
place on the basis of these Terms and Conditions
of Delivery and Payment. They are accepted by
the Customer at the latest with placing the order
however with the acceptance of the first supply,
and shall apply for the entire duration of the business relationship. We hereby expressly contradict
to any opposing business and purchasing conditions of the Customer. Deviations from our terms/
conditions shall be effective only if confirmed by us
in writing
1.2. General terms and conditions of the customer apply only to that extent, when we agreed them expressly in writing. This written-form requirement
cannot be waived.
2. Prices, packaging, terms of payment, sett-off,
right of retention
2.1.Our offers are non-binding. The agreement is
formed only through our written confirmation or
through delivery.
2.2. The invoice for orders for which no individual fixed
price is agreed on is issued on the basis of the list
prices applicable on the day of delivery.
2.3. Prices and discounts quoted verbally shall be effective only if confirmed by us in writing.
2.4. All prices are understood free carrier (FCA) our
factories in Holzminden, Eschwege, Poprad, Ayutthaya and Tianjin including cardboard packaging,
or free on board (FOB) at a German port (Incoterms
2010). Should the need for special packaging arise,
we reserve the right to charge for this separately
and additionally.
2.5. Unless otherwise agreed in writing, our invoices
shall be paid against prepayment in the currency
indicated in the invoice. Unless otherwise agreed in
writing, payment in Euros shall be deemed agreed
on.
2.6. If the products are exported, the Customer will
comply with the German export rules and regulations, and point out to its buyers that German
export rules and regulations are applicable in the
case of an exportation of products. The Customer
undertakes to provide the information necessary
to obtain an (import) export permit already when
the Customer places the order. If at the Customer's
request deliveries are passed on without customs
clearance, the Customer shall be liable for any additional or extra payments demanded by the German customs authorities. If the exportation of the
goods is prohibited or not permitted by the German authorities although such a permit is required,
the Customer cannot derive any claims against us
from this. The same shall apply if, for reasons that
we are not responsible for, the importation of the
goods into the country of destination is prevented
or delayed by the authorities there.
2.7. The Customer is entitled to set off or retain claims
only if they are undisputed or have been ascertained legally binding. The Customer shall have a
right of retention only if its counterclaims are based
on the same contractual relationship.
3. Delivery/acceptance/impossibility performance/
delay/take-back
3.1. A delivery period specified in the order shall be
binding only if confirmed by us in writing. Delivery shall be deemed to have been made within an
agreed delivery period if the goods to be delivered
have left our plant before the end of the delivery
period, or if the Customer is obliged to notify us
prior to delivery of his readiness to collect or take
delivery of the goods, but has not done so, and we
notify the Customer of our readiness to make shipment. In the latter case, delivery shall be deemed
to be made when the written notification of readiness to make shipment is mailed by us.
3.2. The delivery period shall be extended in a reasonable way if the Customer subsequently requests
changes or additions. The same shall apply in the
event of the occurrence of unforeseen difficulties
182
beyond our control, e.g. force majeure,
lawful labour disputes, disruptions of business affecting us or our suppliers.
3.3. All delivery obligations are subject to timely and proper delivery to us, also of suppliers' parts, if delivery is impossible within the
agreed delivery period because of such circumstances or, if no such delivery period is
agreed on, within three months of receipt
of the order, we can cancel the agreement.
The Customer shall not have any claims
against us whatsoever in any of these cases, especially no claims to compensation
for default damage and no damage claims.
3.4. Compensation for any default damage can
be demanded by the Customer only in the
event of wilful act or gross negligence on
our part. This shall not apply if we commit
to a binding delivery date in the confirmation of order and culpably fail to deliver on
or before such date. In any case of default,
our liability shall be limited to the foreseeable loss which typically arises, unless we
intentionally violate the agreement or such
breach of contract is attributable to us. The
foreseeable loss which typically arises will
generally not exceed the double amount
of the order value affected by default.
3.5. In the event of default, we shall have the
right to fix a reasonable deadline for the
Customer to declare whether he wishes
to cancel the agreement and/or demand
damages instead of performance. If the
Customer does not make a statement
within that deadline, his right to cancel the
agreement or to demand damages instead
of performance shall lapse.
3.6. Goods are always shipped for the Customer's account and at the Customer's risk.
All risks shall pass over to the Customer
as soon as the goods are handed over to
the carrier or leave our warehouse for shipment. In all other respects, the Incoterms
2010 shall be applicable.
3.7. The fulfilment of this contract has the reservation that no obstacle in form of German,
US-American or other applicable national,
EU or international provisions of foreign
trade legislation and no embargos or sanctions are in force.
3.8. If the ordering party has the desire to return
defect-free and correctly delivered goods,
the ordering party can apply for a takeback. It is in our free discretion to take back
or not to take-back the goods in question,
especially after verification of age (not older than 6 months) and condition, against a
markdown of at least 20% of the value of
the goods. The ordering party has to bear
all costs related to the take-back
4. Customer’s obligation to complain, liability
for defects
4.1. Our Customer shall not have any claims
because of defects of the goods unless the
Customer properly performed all of his obligations to inspect the goods and to complain of defects pursuant to sec. 377 HGB
(German Commercial Code).
4.2. Any transportation or shipping damage is
to be reported in writing by the Customer
to the carrier immediately upon receipt
of the goods. In addition, we are to be
informed without undue delay about the
damage, if possible by telefax. The Customer shall bear any damage or any loss
of rights incurred by the carrier or by us in
consequence of failure to make an immediate report.
4.3. If a defect which we are responsible for existed already at the time of the passing of
the risk, we shall be obliged to remedy the
defect or, at our option, to make substitute
delivery. If we are not prepared or able to
do so, in particular if this is delayed unreasonably for reasons that we are responsible
for, or if remedial action/substitute delivery
fails in some other way, the Customer shall
have the right – subject to clause 5 of these
General Terms of Payment and Delivery –
to assert the rights otherwise provided for
by law in the event of a defect.
4.4. If we remedy a defect, our obligation also
includes payment of all expenses to remedy the defect, especially transportation,
forwarding, labour and material costs, unless they are increased due to the fact that
the defective goods were taken to a different place than the place of performance.
4.5. The limitation period for all rights pertaining to defects shall be two years but for use
in commercial companies, craft businesses,
industrial companies or comparable activities the limitation period shall be one year;
in other respects, the statutory provisions
shall apply. Any other more extensive statutory warranty rights shall be unaffected by
this.
4.6. However, the Customer shall have rights of
recourse only to the extent that he did not
make any agreement with his buyer which
goes beyond the statutory rights in the
event of a defect
5. Damages
For damage which is not caused to the actual
object of delivery itself, we shall be liable on
whatever legal basis only:
1. in the full amount of the damage in the
case of wilful intent and the case of gross
negligence on the part of management
and/or executive staff, and also
2. subject to subparagraph 4 in any case of
culpable violation of essential contractual
obligations and
3. outside such obligations and subject to
subparagraph 4 also for gross negligence
on the part of persons employed by us for
the performance of our contractual obligations, unless we can exonerate ourselves by
virtue of trade customs,
4. in the two cases of subparagraph 2 and 3
above, limited to the amount of damage
foreseeable and typical for the contract in
question,
5. for defects of the goods which were maliciously concealed by us or whose absence
was guaranteed by us,
6. for defects of the goods to the extent that
the Product Liability Act provides for liability for personal injury or damage to privately
used things,
7. in case of any liability based on an injury of
life, body or health.
Further claims shall be excluded.
6. Retention of title
6.1. We retain title to all goods delivered until
all of our current and future claims against
the Customer have been discharged.
6.2. Any processing or transformation by the
Customer of the goods delivered shall always be done for us. If the goods are processed with other things not belonging to
us, we acquire co-ownership of the new
thing in the proportion of the value of the
goods delivered and transformed or processed (final invoice amount including VAT)
to the other processed things at the time of
processing. In all other respects, the same
shall apply to the thing created through
processing as to the object of purchase delivered subject to retention of title.
NO-FROST
FLOOR WARMING SYSTEMS
SPACE HEATERS
WATER HEATERS
TERMS AND CONDITIONS OF DELIVERY AND PAYMENT
FOR COMMERCIAL COURSE OF BUSINESS ABROAD
6.3. If the goods delivered are mixed inseparably with other things not belonging to
us, we shall acquire co-ownership to the
new thing in the proportion of the value
of the object of the purchase (final invoice
amount including VAT) to the other mixed
things at the time of intermixture. If intermixture takes place in such a way that the
Customer's thing is to be regarded as the
main thing, it is agreed that the Customer
shall transfer co-ownership to us on a pro
rate basis. The Customer shall safekeep for
us the sole ownership or co-ownership thus
created.
The Customer assigns to us by way of security especially also those claims which he
obtains against a third party through the
combination of the goods delivered with a
piece of real estate. This claim shall be subject analogously to the above provisions.
6.4. Any pledge and any transfer of title by way
of security is inadmissible as long as we
retain title. The Customer must inform us
promptly of any pledge or other thirdparty
seizure of the goods title to which is retained by us or of the assigned claims, and
must assist us in every way in the intervention.
6.5. The customer may sell the goods title to
which we retain, in the ordinary course of
business, but only for immediate payment
on delivery or subject to retention of title.
The claims arising from the resale or from
any other legal reason (insurance, tort, etc.)
with respect to the goods title to which
we retain (including all claims to payment
of the balance on a current account) are
hereby assigned already by the Customer
with all ancillary claims to us.
6.6. The Customer is obliged at our request to
inform the buyers in writing of the assignment and to give us all information necessary to assert our rights against the buyers,
to provide documents and to hand over
bills of exchange. For this purpose the Customer must allow us to inspect his records
in this respect, if necessary.
6.7. The Customer shall have the right until further notice to collect the claims assigned
to us. Any assignment or pledge of these
claims is admissible only with our written
consent. In the event of the discontinuation
of payments, failure to honour a check or
a bill of exchange made out by the Customer, an application for the institution of
insolvency proceedings, or the institution
of such proceedings, or in the case of a
foreign customer if proceedings similar
to insolvency proceedings or judicial or
out-of-court composition proceedings are
opened, the right to resell the goods and
to collect the assigned claims shall end.
6.8. Under any of the circumstances described
in clause 6.7, the Customer must give us
access to the goods still in his possession,
send us an exact list of the goods, separate
the goods and hand over the goods to us.
We also have the right to demand the assignment of the Customer's claims for possession against third parties or to cancel the
agreement. In either case, whether we take
back the goods or assert our rights of retention, we need not cancel the agreement.
Neither any of these acts nor a pledge of
the goods title to which is retained shall
constitute a cancellation of the agreement
unless this is expressly declared by us.
6.9. If the value of the security existing for us exceeds our total claims by more than 20%,
we will at the Customer's written request
release an appropriate part of such security
at our option.
6.10.The costs for the performance of the cooperation duties set out in clause 6.4 and
clause 6.6 in connection with all rights arising from the retention of title and all costs
for preserving and storing the goods shall
be borne by the customer
7. Labelling of goods, patent guarantee, redemption and environment friendly disposal of electronic devices
Any change in the goods, the removal of device
numbers and type designations as well as labels
which constitute a designation of origin for the
Customer or a third party or could create the
impression that the product is a special product
are inadmissible unless expressly agreed on in
writing by the parties.
Per the EU guideline 2002/96/EC dated January 27, 2003 (Directive of the European Parliament and of the Council on Waste Electrical and
Electronic Equipment) and the county-specific
regulations released due to this regulation the
purchaser as importer / manufacturer according
to law inside the member States of the European Union is obliged to disposal or to let disposal the devices, stated in EU-Guideline and
in the country-specific regulations, at his own
expenses.
8. Place of performance/jurisdiction
The place of jurisdiction and of performance
for all mutual services is Holzminden. However,
we also have the right to sue at the Customer's
domicile. German law is applicable. The applicability of the provisions of the United Nations
Convention on the International Sale of Goods
(CISG) is expressly excluded
Stiebel Eltron International GmbH,
Limited Liability Company
Registered Office: Holzminden
Register Court: Hildesheim HRB 110397
Management Board:
Rudolf Sonnemann, Karlheinz Reitze,
Dr. Marc-Jan Schutte
Version: 04/2012
183
www.aeg-haustechnik.com
The current terms and conditions of sale and delivery (domestic) apply.
Despite the information in this product information being put together with great care, we cannot rule out the possibility of mistakes. Statements on
the equipment and equipment features are not binding. The equipment features described in this product information are not the agreed properties
of our products. Our products are developed on an ongoing basis. Individual equipment features may have since changed or been removed. Please
contact our consultants for details of the current equipment features. The photos in the brochure are only examples of use. The photos also contain
installation parts, accessories and special equipment which are not supplied as standard. The publisher‘s consent must be obtained for reprints, even
extracts hereof.
The installation of appliances that require wiring on site must be installed by the relevant power supply utility or an authorised electrician, who will also
be able to assist you with obtaining any permits required from the respective power supply utility prior to the installation of the appliance.
AEG Haustechnik
– International Sales –
c/o Stiebel Eltron International GmbH
Dr.-Stiebel-Straße
D-37603 Holzminden
Telephone: +49 5531 702-0
Telefax: +49 5531 702-95479
info@stiebel-eltron.com
www.aeg-haustechnik.com
Information and sales
No. 308911 · Subject to technical modifications. © 2015 EHT Haustechnik GmbH · FP-Werbung · München · EHT-13-2206
AEG is a registered trademark under the license from AB Electrolux (publ).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising