TIA/EIA-606-A Labeling Compliance

TIA/EIA-606-A Labeling Compliance
Labeling and
Identification
Solutions
TIA/EIA-606-A Labeling Compliance
Featuring the Ultimate ID ® Network Labeling System
TIA/EIA-606-A
Labeling Compliance
TIA/EIA-606-A Standard
For compliance with the TIA/EIA-606-A standard, Panduit has the solution.
This brochure will walk you through the labeling requirements of the standard and
introduce you to identification solutions specifically designed to comply with
TIA/EIA-606-A. The standard establishes guidelines for owners, end users,
manufacturers, consultants, contractors, designers, installers and facility
administrators involved in the administration of the telecommunications
infrastructure. Proper identification of your network allows moves, adds, changes,
trouble shooting and repairs to be accomplished faster and more efficiently.
The Ultimate ID ® Network Labeling System
The Ultimate ID ® Network Labeling System featured in this brochure was designed
specifically with the TIA/EIA-606-A standard in mind. It includes faceplates, surface
mount boxes, patch panels, marker ties, labels for desktop printers and the
PanTher ™ LS8E Hand-Held Thermal Transfer Printer. All Ultimate ID ® hardware
uses labels with a common compact height. This not only enhances the
appearance of the installation, but also saves time and money by providing a clear
and efficient way to label according to the TIA/EIA-606-A standard. All labels are
positioned adjacent to, centered and parallel to the module they are identifying. The
appearance of the installation can be further enhanced by using a consistent font
size throughout the installation. The PanTher™ LS8E Printer and Panduit desktop
labeling software can both be used to mechanically print labels with the same font.
For detailed information on related Panduit identification products, you may
request the following information from our customer service representatives or by
downloading from the Panduit web site:
• Panduit Physical Infrastructure Systems Catalog
• PanTher™ LS8E Hand-Held Thermal Transfer Printer: Product Bulletin
• TDP43MY Thermal Transfer Printer: Product Bulletin
• Easy-Mark ™ Labeling Software: Product Bulletin
Products that are a part of the
Ultimate ID ® Network Labeling
System are identified with this icon.
Table of Contents
Roadmaps
2–3
Horizontal Link Identification – Work Area Outlets
4–8
Ultimate ID ® Faceplates
5–7
Ultimate ID ® Surface Mount Boxes
7–8
Horizontal Link Identification – Patch Panels
Horizontal Link Identification – Cables
9 – 11
12 – 14
Telecommunications Space Identification
15
Telecommunications (Main) Grounding Busbar Identification
16
Horizontal Link Identification – IDC Punchdown Block
17
Firestopping Location Identification
18
Horizontal Link Identification – Connectors
19
Thermal Transfer Printers
20 – 21
Labeling Software
22
Labeling Accessories
23
TIA/EIA-606-A Description Summary
24
Horizontal Link Identifier Labeling Format
25
1
For service and technical support, call 800-777-3300 or visit www.panduit.com
TIA/EIA-606-A Labeling Compliance in the Telecommunications Space Roadmap
1
6
2
4
7
5
3
1
2
Horizontal Link
Identification – Cables
(see pages 12 – 14)
5
Cable Identification –
Horizontal Link
(see pages 12 – 14)
2
Telecommunications
(Main) Grounding Busbar
Identification
(see page 16)
6
Firestopping Location
Identification
(see page 18)
3
Horizontal Link
Identification – Patch
Panels (see pages 9 – 11)
7
Telecommunications
Space Identification
(see page 15)
4
Horizontal Link
Identification – IDC
Punchdown Block
(see page 17)
TIA/EIA-606-A Labeling Compliance in the Work Area Roadmap
9
8
10
8
Horizontal Link Identification –
Cables (see pages 12 – 14)
9
Horizontal Link Identification –
Work Area Outlets
(see page 4 – 8)
10
Horizontal Link Identification –
Connectors (see page 19)
3
For service and technical support, call 800-777-3300 or visit www.panduit.com
Horizontal Link Identification – Work Area Outlets
Section 5.1.2 States
horizontal
linkIidentifier,
shall
to each
UALT
I M AT E
D ® N eunique
t w owithin
r k the
L abuilding,
belin
g be
S assigned
ystem
f o rhorizontal
O u t llink
e tand
s to its elements.
In
the
work
area,
shall be labeled with the horizontal link
( F a c e p l a t eeach
s / Sindividual
u r f a ctelecommunications
e M o u n t Boutlet/connector
o xe s )
identifier. The labeling shall appear on the connector, faceplate, or MUTOA, in a way that clearly identifies the
individual connector associated with the particular identifier. A horizontal link identifier shall have a format of
“fs-an” where:
f = numeric character(s) identifying the floor of the building occupied by the TS (Telecommunications Space)
s = alpha character(s) uniquely identifying the TS on floor f, or the building area in which
the space is located
a = one to two alpha characters uniquely identifying a single patch panel or a group of
patch panels with sequentially numbered ports, an IDC connector, or a group of IDC
connectors, serving as part of the horizontal cross-connect
n = two to four numeric characters designating the port on a patch panel in the TS or
the section of an IDC connector on which, a four pair horizontal cable is terminated
in the TS
For example:
“1A-B02” = origination point first floor, TS A, patch panel B, position 02
Each Ultimate ID ® Faceplate/Surface Mount Box is designed in a way that allows you to center
the “an” identifier clearly over each connector, while the “fs” identifier can be placed in the
station space.
Desktop Laser/Ink Jet Labels
Part Number
UILJ1
UILJ2
UILJ3
UILJ4
UILJ6
UILJCOMBO
Part Description
White, non-adhesive polyester labels, 264 per
sheet, 1-port labels.
White, non-adhesive polyester labels, 132 per
sheet, 2-port labels.
White, non-adhesive polyester labels, 99 per
sheet, 3-port labels.
White, non-adhesive polyester labels, 66 per
sheet, 4-port labels.
White, non-adhesive polyester labels, 66 per
sheet, 6-port labels.
White, non-adhesive polyester labels,
combination sheet with 40 1-port, 60 2-port,
3 3-port and 24 4-port labels.
Std.
Pkg.
Qty.
5
Std.
Ctn.
Qty.
50
6.00
5
50
.236
6.00
5
50
65.66
.236
6.00
5
50
3.855
97.92
.236
6.00
5
50
—
—
.236
6.00
5
50
Width
In.
mm
.680
17.27
Height
In.
mm
.236
6.00
1.315
33.40
.236
1.950
49.53
2.585
Order number of sheets required in multiples of Standard Package Quantity.
For Electrical Ivory labels, add EI at end of part number.
For detailed information on Ultimate ID ® Patch Panels and Labeling Solutions, request the Panduit® Physical Infrastructure Systems
catalog, SA-NCCB51.
PanTher ™ LS8E Hand-Held Thermal Transfer Printer Label Cassette
Part Number
UILS8BW
Part Description
White, non-adhesive polyester label cassette.
Order number of cassettes required.
4
Height
In.
mm
.236
6.0
Length
Ft.
m
25.0
7.6
Std.
Pkg.
Qty.
1
Std.
Ctn.
Qty.
10
Mini-Com ® Ultimate ID ® Faceplates
• Ultimate ID ® components are part of a complete system for
identification designed to efficiently support
TIA/EIA-606-A standard labeling requirements
• Accept Mini-Com ® Modules for STP and UTP, fiber optic
and audio/video, which snap in and out for easy moves,
adds, and changes
• Supplied with color coordinated screw cover and clear
station and port label covers
• Labels sold separately
• Can be clearly identified with the PanTher ™ LS8E
Hand-Held Thermal Transfer Printers
• Non-adhesive computer printable label sheets for desktop
printers and write-on labels available
• Replacement screw covers and label covers available
• Optional icons available
Mini-Com ® Ultimate ID ® Classic Series Faceplates
UICFP2IW
UICFP6IW
Labels
Required*
One 1-Port
One 2-Port
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
Part Number
UICFP2IW
Part Description
Single gang, vertical faceplate holds up to
two Mini-Com ® Modules.
Color‡
Off White
UICFP4IW
Single gang, vertical faceplate holds up to
four Mini-Com ® Modules.
Off White
One 1-Port
Two 2-Port
1
10
UICFP6IW
Single gang, vertical faceplate holds up to
Off White
six Mini-Com ® Modules. Requires minimum
1.9" wide in-wall box or wallboard adapter for
proper installation.
One 1-Port
Two 3-Port
1
10
UICFPH2IW
Single gang, horizontal faceplate holds up to Off White
two Mini-Com ® Modules.
One 1-Port
One 2-Port
1
10
UICFPH4IW
Single gang, horizontal faceplate holds up to Off White
four Mini-Com ® Modules.
One 1-Port
One 4-Port
1
10
UICFPH4IW
‡For other colors replace suffix IW (Off White) with EI (Electric Ivory), WH (White), IG (International Gray)
or BL (Black).
All faceplates supplied with mounting screws.
Mini-Com ® Ultimate ID ® Executive Series Faceplates
UICFPSE4IW
UICFPHSE2IW
UICFPSE8IW-2G
Labels
Required*
One 1-Port
One 2-Port
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
Part Number
UICFPSE2IW
Part Description
Single gang, vertical sloped faceplate
holds up to two Mini-Com ® Modules.
Color‡
Off White
UICFPSE4IW
Single gang, vertical sloped faceplate
holds up to four Mini-Com ® Modules.
Off White
One 1-Port
Two 2-Port
1
10
UICFPSE6IW
Single gang, vertical sloped faceplate
Off White
holds up to six Mini-Com ® Modules.
Requires minimum 1.9" wide in-wall box or
wallboard adapter for proper installation.
One 1-Port
Two 3-Port
1
10
UICFPSE8IW-2G
Double gang, vertical faceplate holds up to Off White
eight Mini-Com ® Modules.
Four 4-Port
1
10
UICFPHSE2IW
Single gang, horizontal sloped faceplate
holds up to two Mini-Com ® Modules.
Off White
One 1-Port
One 2-Port
1
10
UICFPHSE4IW
Single gang, horizontal sloped faceplate
holds up to four Mini-Com ® Modules.
Off White
One 1-Port
One 4-Port
1
10
‡For other colors replace suffix IW (Off White) with EI (Electric Ivory), WH (White), IG (International Gray)
or BL (Black).
All faceplates supplied with mounting screws.
5
For service and technical support, call 800-777-3300 or visit www.panduit.com
Mini-Com ® Ultimate ID ® Stainless Steel Faceplates
• Impact resistant 304 stainless steel suitable for light industrial environments
Std.
Pkg.
Qty.
1
Std.
Ctn.
Qty.
10
Part Number
UICFP2S
Part Description
Single gang, vertical stainless steel faceplate holds
up to two Mini-Com ® Modules.
Labels
Required*
One 1-Port
One 2-Port
UICFP4S
Single gang, vertical stainless steel faceplate holds
up to four Mini-Com ® Modules.
One 1-Port
Two 2-Port
1
10
UICFP6S
Single gang, vertical stainless steel faceplate holds
up to six Mini-Com ® Modules. Requires minimum
1.9" wide in wall box or wallboard adapter for
proper installation.
One 1-Port
Two 3-Port
1
10
UICFP6S
All faceplate supplied with mounting screws.
Mini-Com ® Ultimate ID ® Tamper Resistant Faceplate Kit
• Includes tamper resistant screw to prevent unauthorized
access to the connections
• Front accessible inserts are recessed and provide a 30°
slope to provide proper bend radius control
Part Number
UICFPRTR4IW
• Requires minimum in-wall box depth of 2.125"
Part Description
Tamper resistant faceplate kit includes
faceplate frame, two recessed modular
inserts, faceplate cover with additional
outlet station identifier and tamper
resistant screw. Holds up to four
Mini-Com ® Modules.
Color‡
Off
White
Labels
Required*
One 1-Port
Two 2-Port
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
‡For other colors replace suffix IW (Off White) with EI (Electric Ivory) or WH (White).
All faceplates supplied with mounting screws.
1/16" hex key required for installation of tamper resistant screw.
Mini-Com ® Ultimate ID ® Modular Furniture Faceplate
• Fits standard furniture openings
Part Number
UICFFP4BL
Part Description
Faceplate snaps into standard knockouts
found on modular furniture. Holds up to
four Mini-Com ® Modules. See panel
cutout requirement.
Std. Std.
Labels
Pkg. Ctn.
Color‡ Required * Qty. Qty.
Black One 1-Port 1
10
One 4-Port
‡For other colors replace suffix BL (Black) with EI (Electric Ivory), IG (International Gray), or IW (Off White).
Panel Cutout Requirement
1.34" to 1.40"
(34.20mm to 35.70mm)
2.67" to 2.75"
(67.82mm to 69.85mm)
6
Mini-Com ® Ultimate ID ® Sloped Snap-On Faceplates
• Sloped Snap-On Faceplates for use with Panduit ®
Mini-Com ® Modules and T-70, Twin-70, Pan-Pole ™ Outlet
Pole and Fast-Snap ™ Outlet Boxes.
• For use with Panduit raceway: LD, T-45, T-70, Twin-70,
TG-70, Pan-Pole ™ Outlet Pole and Fast-Snap ™ Outlet Boxes
• Snap into raceway channel or outlet box and requires no
additional mounting hardware or adapters – greatly reducing
installation time
• Meet stringent UL5A standard for non-metallic raceways
• Accept Mini-Com ® Modules for STP and UTP, fiber optic and
audio/video, which snap in and out for easy moves, adds,
and changes
UIT70FH2
UIT70FV2
• Non-adhesive computer printable label sheets for desktop
printers and write-on labels available.
• Supplied with clear station and port label covers, labels
sold separately
• Replacement label covers available
• Optional icons available
• Ultimate ID ® Components are part of a complete system for
identification designed to efficiently support TIA/EIA-606-A
standard labeling requirements
Std. Std.
Pkg. Ctn.
Labels
Required* Color‡ Qty. Qty.
One 1-Port Off White 1
10
One 2-Port
Part Number
UIT70FH2IW
Part Description
Single gang, horizontal sloped
communication snap-on faceplate accepts
up to two Mini-Com ® Modules.
UIT70FH4IW
Single gang, horizontal sloped
communication snap-on faceplate accepts
up to four Mini-Com ® Modules.
One 1-Port Off White
One 4-Port
1
10
UIT70FV2IW
Single gang, vertical sloped communication
snap-on faceplate accepts up to two
Mini-Com ® Modules.
One 1-Port Off White
One 2-Port
1
10
UIT70FV4IW
Single gang, vertical sloped communication
snap-on faceplate accepts up to four
Mini-Com ® Modules.
One 1-Port Off White
Two 2-Port
1
10
UIT70FH4
UIT70FV4
• Can be clearly identified with the PanTher ™ LS8E
Hand-Held Thermal Transfer Printers
‡For other colors replace suffix IW (Off White) with EI (Electric Ivory) or WH (White).
Mini-Com ® Ultimate ID ® Surface Mount Boxes
• Ultimate ID ® Components are part of a complete system for
identification designed to efficiently support TIA/EIA-606-A
standard labeling requirements
• Accept Mini-Com ® Modules for STP and UTP, fiber optic and
audio/video, which snap in and out for easy moves, adds,
and changes
• Supplied with color coordinated screw cover and clear
station and port label covers
• Can be clearly identified with PanTher ™ LS8E Hand-Held
Thermal Transfer Printer
Part Number
UICBX2IW-A
Part Description
Surface mount box accepts two
Mini-Com ® Modules. Dimensions:
1.06"H x 1.95"W x 3.65"L
(26.92mm H x 49.53mm W x
92.71mm L). Compatible with
optional magnet (CBM-X).
UICBX4IW-A
Surface mount box accepts four
Mini-Com ® Modules. Dimensions:
1.06"H x 3.69"W x 4.59"L
(26.92mm H x 93.73mm W x
116.59mm L). Compatible with
optional magnet (CSBM-X).
UICBX2IW-A
UICBX4IW-A
• 4-port box includes adjustable mounting tabs that enable a
range of modular furniture partitions to be used for mounting
the box, maximum panel thickness .08''
• Non-adhesive computer printable label sheets for desktop
printers and write-on labels available
• Replacement screw covers and label covers available
• Optional Icons available
• Custom mounting screws included
• Mount easily with supplied mounting screws, adhesive
tape or optional magnet
• Labels sold separately
Used with Std. Std.
Labels Pan-Way ® Pkg. Ctn.
Color‡ Required* Raceway Qty. Qty.
Off
One
LD3
1
10
White
1-Port
One
2-Port
Off
White
One
1-Port
One
4-Port
LD3, LD5
1
‡For other colors replace suffix IW (Off White) with IG (International Gray), WH (White) or EI (Electric Ivory).
For service and technical support, call 800-777-3300 or visit www.panduit.com
10
7
Mini-Com ® Ultimate ID ® Hybrid Surface Mount Box
• A retention block snaps to the base and accepts any
single gang faceplate (up to six ports)
• Hybrid design accepts Mini-Com ® Copper and Fiber
Optic Modules
• Manages up to 12m of buffered fiber optic cable that is
secured in place by cable tie mounting loops
Part Number
UICBXH6IW-A
UICBXH6IW-A
UICBXHECIW
• Cover snaps to base and is secured with a screw; includes
a 6-position Ultimate ID ® Label Pocket to identify fiber optic
connections; a clear screw cover is included for
station identification
• Optional cover extension provides additional security of
fiber connections
• Heat shrink tubing included
Labels
Part Description
Color‡ Required
Hybrid box with cover accepts up
Off
One
to six Mini-Com ® Modules in a
White
1-Port
single gang Mini-Com ® Faceplate,
One
6-Port
and up to six Mini-Com ® Fiber
Optic Modules in the base.
Used with
Pan-Way ®
Raceway
LD3, LD5
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
UICBXHC6IW-A
Hybrid box with cover and cover
extension accepts up to six
Mini-Com ® Modules in a single
gang Mini-Com ® Faceplate, and
up to six Mini-Com ® Fiber Optic
Modules in the base.
Off
White
One
1-Port
One
6-Port
LD3, LD5
1
10
UICBXHECIW
Cover extension for hybrid box.
Off
White
—
—
1
10
‡For other colors replace suffix IW (Off White) with EI (Electric Ivory) or WH (White).
Mini-Com ® Ultimate ID ® Multi-Media/Fiber Surface Mount Box
• Features twelve ports, six on each side, angled to improve
bend radius control
• Includes two knockouts which are compatible with
Panduit LD5 and LD10 Raceway
Part Number
UICBXA12IW-A
• Mounts easily with supplied mounting screw, adhesive tape
or optional magnet
Part Description
Color ‡
Labels
Required
Multi-media surface mount box accepts up to
twelve Mini-Com ® Modules and includes
built-in figure eight spool to help manage
fiber cable.
Off
White
Two 4-Port
Two 6-Port
‡For other colors replace suffix IW (Off White) with EI (Electric Ivory) or WH (White).
8
Std. Std.
Pkg. Ctn.
Qty.* Qty.
1
10
Horizontal Link Identification – Patch Panels
Section 5.1.2 States
A horizontal link identifier, unique within the building, shall be assigned to each horizontal link and to its elements.
In the Telecommunications Space (TS), each patch panel port shall be labeled with the “an” portion of the
identifier. This requirement may be met by labeling a patch panel with the “a” portion of the identifier, and each
port with the “n” portion where:
a = one to two alpha characters uniquely identifying a single patch panel, or a group of patch panels with
sequentially numbered ports
n = two to four numeric characters designating the port on a patch panel in the TS
For example:
“A12” = patch panel A, position 12
The Mini-Com ® Ultimate ID ® Patch Panel and Labeling System allows you to center the “an”
identifier over each port.
Desktop Laser/ Ink Jet Labels
Part Number
UILJ4
Part Description
White, non-adhesive polyester labels, 66 per
sheet, 4-port labels.
Width
In.
mm
2.585 65.66
Height
In.
mm
.236
6.00
Std.
Pkg.
Qty.
5
Std.
Ctn.
Qty.
50
Order number of sheets required in multiples of Standard Package Quantity
For detailed information on Ultimate ID ® Patch Panels and Labeling Solutions, request the Physical Infrastructure Systems catalog, SA-NCCB51.
PanTher ™ LS8E Hand-Held Thermal Transfer Printer Label Cassette
Part Number
UILS8BW
Part Description
White, non-adhesive polyester label cassette.
Height
In.
mm
.236
6.0
Length
Ft.
m
25.0
7.6
Std.
Pkg.
Qty.
1
Std.
Ctn.
Qty.
10
Order number of cassettes required.
9
For service and technical support, call 800-777-3300 or visit www.panduit.com
Mini-Com ® Ultimate ID ® Modular Patch Panels
• Ultimate ID ® components are part of a complete
system for identification designed to efficiently support
TIA/EIA-606-A standard labeling requirements
• Mount to standard EIA 19" racks
• Accept Mini-Com ® Modules for UTP, fiber optic and
audio/video, which snap in and out for easy moves, adds,
and changes
• Can be clearly identified with the PanTher™ LS8E
Hand-Held Thermal Transfer Printers
UICMPPA24BLY
UICMPPA48BLY
• Non-adhesive computer printable label sheets for desktop
printers and write-on labels available
• Replacement label covers available
• Labels sold separately
• Angled patch panels facilitate proper bend radius control
and minimize the need for horizontal cable managers
Part Number
Part Description
No. of
Std. Std.
Rack
Labels Pkg. Ctn.
Spaces^ Required Qty. Qty.
Mini-Com Ultimate ID Angled Modular Patch Panels
®
®
UICMPPA24BLY 24-port angled patch panel with six
UICPPL4BL Mini-Com ®
Ultimate ID ® Faceplates.
UICMPPA48BLY 48-port angled patch panel with twelve
UICPPL4BL MINI-COM ®
Ultimate ID ® Faceplates.
1
Six
4-Port
1
10
2
Twelve
4-Port
1
10
Mini-Com ® Ultimate ID ® Modular Patch Panels
UICMPP24BLY
24-port patch panel with six UICPPL4BL
Mini-Com ® Ultimate ID ® Faceplates.
1
Six
4-Port
1
10
UICMPP48BLY
48-port patch panel with twelve UICPPL4BL
Mini-Com ® Ultimate ID ® Faceplates.
2
Twelve
4-Port
1
10
UICMPP24BLY
UICMPP48BLY
10
^One rack space = 1.75" (44.45mm).
Includes #12-24 and metric M6 screws to mount the patch panel to the rack.
Mini-Com ® Ultimate ID ® Replacement Patch Panel Faceplates
UICPP2L4BL
Part Number
UICPP2L4BL
Part Description
Patch panel faceplate with two label pockets, accepts
up to four Mini-Com ® Modules.
Labels
Required
Two
4-Port
UICPPL4BL
Patch panel faceplate with one label pocket, accepts
up to four Mini-Com ® Modules.
One
4-Port
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
1
10
Faceplates shown with labels installed; labels sold separately.
UICPPL4BL
Mini-Com ® Ultimate ID ® TX6 ™ PLUS Modular Patch Panel Kits
• Supplied with black Mini-Com ® TX6 ™ PLUS Jack Modules
• Include color coded termination caps
• Front access faceplates in panels
Part Number
UICMPPKA6G24BL
• Labels sold separately
• Can be clearly identified with the PanTher ™ LS8E
Hand-Held Thermal Transfer Printers
Part Description
Mini-Com ® Ultimate ID ® Angled Modular Patch Panel Kits
UICMPPKA6G24BL 24-port UICMPPA24BL angled patch panel
with 24 CJ688TGBL Jack Modules.
UICMPPK6G24BL
No. of Std. Std.
Labels
Rack Pkg. Ctn.
Required Spaces^ Qty. Qty.
Six
4-Port
1
1
10
Six
4-Port
1
1
10
Mini-Com ® Ultimate ID ® Modular Patch Panel Kits
UICMPPK6G24BL
24-port UICMPP24BL patch panel with 24
CJ688TGBL Jack Modules.
^One rack space = 1.75" (44.45mm).
Includes #12-24 and metric M6 screws to mount the patch panel to the rack.
11
For service and technical support, call 800-777-3300 or visit www.panduit.com
Horizontal Link Identification – Cables
Section 5.1.2 States
A horizontal link identifier, unique within the building, shall be assigned to each horizontal link and to its elements.
Each end of a horizontal cable shall be labeled within 300mm (12 inches) of the end of the cable jacket with the
horizontal link identifier, which shall be visible on the exposed part of the cable jacket. This shall include each
cable in the Telecommunications Space (TS), at the work area, and at a Consolidation Point (CP), if present.
A horizontal link identifier shall have a format of “fs-an” where:
f=
s=
a=
n=
numeric character(s) identifying the floor of the building occupied by the TS
alpha character(s) uniquely identifying the TS on floor f, or the building area in which the space
is located
one to two alpha characters uniquely identifying a single patch panel or a group of patch panels with
sequentially numbered ports, an IDC connector or a group of IDC connectors serving as part of the
horizontal cross-connect
two to four numeric characters designating the port on a patch panel in the TS or the section of an
IDC Connector on which a four pair horizontal cable is terminated in the TS
For example:
“1A-B01” = cable origination point first
floor, TS A, patch panel B, position 01
Ultimate ID ®
Label and
Marker Tie
Self-Laminating
Label
S100X150YAJ
Self-Laminating
Label and Sleeve
S100X160YAJ
NWSLC-3Y
Section 6.1.1 States
A unique building backbone cable identifier shall be assigned to each backbone cable between two TS’s in one
building and it shall have a format of “fs1/fs2-n” where:
fs1 = TS identifier for the space containing the termination of one end of the backbone cable
fs2 = TS identifier for the space containing the termination of the other end of the backbone cable
n = one to two alphanumeric characters identifying a single cable with one end terminated in the TS
designated fs1 and the other end terminated in the TS designated fs2
In this format, the TS with the lesser alphanumeric identifier shall be listed first. If the entire cable is within one
TS, the format may be fs1/fs1-n. All building backbone cable identifiers in a single infrastructure should have the
same format where possible. The backbone cable identifier shall be marked on each end of the backbone cable
within 300mm (12 inches) of the end of the cable jacket.
For example:
“1A/2A-1” = TS A on first floor to TS A
on second floor, cable 1
UILJ2 Label and
UIHL12-X0 or
UIHL22X0 Marker Tie
Panduit labels for laser/ink jet printers and hand-held thermal transfer printers can be
generated by a mechanical device and are made of durable polymer construction that will
withstand the effects of moisture, heat, and time.
12
Ultimate ID ® Network Labeling System
Desktop Laser/Ink Jet Labels
Part Number
UILJ2
Part Description
White, non-adhesive polyester labels, 132 per
sheet, 2-port labels.
Width
In.
mm
1.315 33.40
Height
In.
mm
.236
6.00
Std.
Pkg.
Qty.
5
Std.
Ctn.
Qty.
50
Order number of sheets required in multiples of Standard Package Quantity
For Electrical Ivory labels, add EI at end of part number.
For detailed information on Ultimate ID ® Patch Panels and Labeling Solutions, request the Physical Infrastructure Systems catalog, SA-NCCB51.
PanTher ™ LS8E Hand-Held Thermal Transfer Printer Label Cassette
Part Number
UILS8BW
Part Description
White, non-adhesive polyester label cassette.
Height
In.
mm
.236
6.0
Length
Ft.
m
25.0
7.6
Std.
Pkg.
Qty.
1
Std.
Ctn.
Qty.
10
Order number of cassettes required.
Marker Ties
Part Number
UICBM1M-C
UIHL12-X0
UIHL22-X0
Tie
Length
(In.)
4.4
5.6
5.6
Max.
Bundle
Diameter
(In.)
1.00
1.00
1.00
Min.
Loop Tensile
Strength
(Lbs.)*
18
15
15/tie
Material
Nylon 6.6
Hook and loop
Hook and loop
Std.
Pkg.
Qty.**
100
10
10
Std.
Ctn.
Qty.
1000
100
100
*Minimum 2" overlap required to achieve loop tensile rating on UIHL (Hook and Loop) parts. Marker ties shown
include labels installed, labels sold separately.
**Order number of pieces required, in multiples of Standard Package Quantity
13
For service and technical support, call 800-777-3300 or visit www.panduit.com
Network Labeling System
Desktop Laser/Ink Jet Labels
Part Number
S100X150YAJ
Part Description
White print-on area, polyester label.
Print-On
Width
Length Area Height
In. mm In. mm In. mm
1.00 25.40 1.50 38.10 .50 12.70
Min. Cable Max. Cable Std. Std.
Diameter Diameter Pkg. Ctn.
In. mm In. mm Qty. Qty.
.16 4.04 .32 8.09 2500 10000
S100X160YAJ ^
White print-on area, polyester label.
1.00 25.40 1.60 40.64 .80 20.32 .25
6.35
.25
6.35 2500 10000
S100X220YAJ +
White print-on area, polyester label.
1.00 25.40 2.20 55.88 1.10 27.94 .35
8.89
.35
8.89 1000 5000
Order number of labels required in multiples of Standard Package Quantity.
^Use this label with NWSLC-2Y LabelCore ™ Sleeve to identify 2mm fiber, and with NWSLC-3Y LabelCore ™ Sleeve to identify 3mm fiber.
+Use this label with NWSLC-7Y LabelCore ™ Sleeve to identify 3mm duplex fiber.
TDP43MY Desktop Thermal Transfer Labels
Part Number
S100X150VATY^
Part Description
White print-on area, vinyl label.
Print-On
Width
Length Area Height
In. mm In. mm In. mm
1.00 25.40 1.50 38.10 .50 12.70
Min. Cable Max. Cable Std.
Diameter Diameter Pkg.
In. mm In. mm Qty.
.16 4.04 .32 8.09 5000
S100X225VATY+
White print-on area, vinyl label.
1.00 25.40 2.25 57.15 .75 19.05 .24
6.06
Std.
Ctn.
Qty.
20000
.48 12.13 5000 20000
Order number of labels required in multiples of Standard Package Quantity.
^Use this label with NWSLC-2Y LabelCore ™ Sleeve to identify 2mm fiber, and with NWSLC-3Y LabelCore ™ Sleeve to identify 3mm fiber.
+Use this label with NWSLC-7Y LabelCore ™ Sleeve to identify 3mm duplex fiber.
PanTher ™ LS8E Hand-Held Thermal Transfer Labels
Print-On
Width
Length Area Height
In. mm In. mm In. mm
1.00 25.40 1.50 38.10 .50 12.70
Min. Cable Max. Cable Std. Std.
Diameter Diameter Pkg. Ctn.
In. mm In. mm Qty. Qty.
.16 4.04 .32 8.09
1
10
Part Number
S100X150VAC
Part Description
White print-on area, vinyl label for Cat.
5e/Cat. 6 cables, 200/cassette.
S100X160VAC^
White print-on area, vinyl label 175/cassette. 1.00 25.40 1.60 40.64 .80 20.32 .25 6.35 .25 6.35
For use with LabelCore ™ Sleeves
NWSLC-2Y and NWSLC-3Y.
White print-on area, vinyl label for 8 – 4
1.00 25.40 2.20 55.88 .80 27.94 .48 12.19 .48 12.19
wires, 125/cassette. For use with
NWSLC-7Y.
S100X220VAC+
1
10
1
10
Order number of labels required in multiples of Std. Pkg. Qty.
^Use this label with NWSLC-2Y LabelCore ™ Sleeve to identify 2mm fiber, and with NWSLC-3Y LabelCore ™ Sleeve to identify 3mm fiber.
+Use this label with NWSLC-7Y LabelCore ™ Sleeve to identify 3mm duplex fiber.
LabelCore ™ Fiber Optic Cable Identification System
Part Number
NWSLC-2Y
Apply LabelCore ™
Sleeve to cable
Wrap label around
LabelCore ™ Sleeve
NWSLC-3Y
NWSLC-7Y
Part Description
Yellow, cable identification sleeve for 2mm simplex
fiber cable.
Orange, cable identification sleeve for 3mm simplex
fiber cable.
White, cable identification sleeve for 3mm duplex
fiber cable.
Order number of sleeves required in multiple of Standard Package Quantity.
Locate on straight section of cable at least two inches from fiber boot.
14
Std. Std.
Pkg. Ctn.
Qty. Qty.
100 1000
100
1000
100
1000
Telecommunications Space Identification
Section 5.1.1 States
A Telecommunications Space (TS) identifier, unique within the building, shall be assigned to the TS and it shall have
the format “fs”, where:
f = numeric character(s) identifying the floor of the building occupied by the TS
s = alpha character(s) uniquely identifying the TS on floor f, or the building area in which the space is located
For buildings with non-numeric floors, alpha-numeric characters may be used in the “f” format and shall be
consistent with the floor naming convention used within the building. The TS shall be labeled with the TS identifier
inside the room so as to be visible to someone working in that room.
For example:
“1A” = first floor, TS A
Panduit labels for laser/ink jet and thermal transfer printers can be generated by a mechanical
device and are made of durable polymer construction that will withstand the effects of moisture,
heat, and time.
Desktop Laser/Ink Jet Labels
Part Number
C200X100FJJ
Part Description
White, polyolefin label.
Width
In.
mm
2.00
50.80
Height
In.
mm
1.00
25.40
Std.
Pkg.
Qty.
1000
Std.
Ctn.
Qty.
5000
Height
In
mm
1.00
25.4
Std. Std.
Pkg. Ctn.
Qty. Qty.
2500 10000
Order number of labels required in multiples of Standard Package Quantity.
TDP43MY Desktop Thermal Transfer Labels
Part Number
C200X100YPT
Part Description
White, polyester label.
Width
In
mm
2.00
50.8
Order number of labels required in multiples of Standard Package Quantity.
PanTher ™ LS8E Hand-Held Thermal Transfer Printer Label Cassette
Part Number
C200X100YPC
Part Description
White, high tack polyester label, 200/cassette.
Width
In.
mm
2.00
50.8
Height
In.
mm
1.00
25.4
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
Order number of cassettes required.
15
For service and technical support, call 800-777-3300 or visit www.panduit.com
Telecommunications (Main) Grounding Busbar Identification
Section 5.1.3 States
The Telecommunications Main Grounding Busbar (TMGB) identifier is used to identify the
single TMGB present in a building. The TMGB shall be labeled with the TMGB identifier.
The format for the TMGB identifier shall be “fs-TMGB”, where:
fs
= TS (Telecommunications Space) identifier for the space containing the TMGB
TMGB = portion of an identifier designating a Telecommunications Main Grounding Busbar
For example:
“1A-TMGB” = first floor, TS A,
Telecommunications Main Grounding Busbar
Section 5.1.4 States
A Telecommunications Grounding Busbar (TGB) identifier is used to identify TGBs in the
grounding and
bonding system. Each TGB shall be labeled with the TGB identifier. A unique TGB identifier shall be assigned to
each TGB and the format for the TGB identifier shall be “fs-TGB”, where:
fs
= TS identifier for the space containing the TGB
TGB = portion of an identifier designating a Telecommunications Grounding Busbar
All of the TGB identifiers in a single infrastructure should have the same format where possible.
For example:
“1A-TGB” = first floor, TS A,
Telecommunications Grounding Busbar
Panduit labels for laser/ink jet and thermal transfer printers can be generated by a mechanical
device and are made of durable polymer construction that will withstand the effects of
moisture, heat, and time.
Desktop Laser/Ink Jet Labels
Part Number
C200X100FJJ
Part Description
White, polyolefin label.
Width
In.
mm
2.00
50.80
Height
In.
mm
1.00
25.40
Std.
Pkg.
Qty.
1000
Std.
Ctn.
Qty.
5000
Height
In
mm
1.00
25.4
Std. Std.
Pkg. Ctn.
Qty. Qty.
2500 10000
Order number of labels required in multiples of Standard Package Quantity.
TDP43MY Desktop Thermal Transfer Labels
Part Number
C200X100YPT
Part Description
White, polyester label.
Width
In
mm
2.00
50.8
Order number of labels required in multiples of Standard Package Quantity.
PanTher ™ LS8E Hand-Held Thermal Transfer Printer Label Cassette
Part Number
C200X100YPC
Part Description
White, high tack polyester label, 200/cassette.
Order number of cassettes required.
16
Width
In.
mm
2.00
50.8
Height
In.
mm
1.00
25.4
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
Horizontal Link Identification – IDC Punchdown Block
Section 5.1.2 States
A horizontal link identifier, unique within the building, shall be assigned to each horizontal link and to its
elements. In the TS (Telecommunications Space), each section of an IDC connector (punchdown block)
terminating a four pair cable shall be labeled with the “an” portion of the identifier. This requirement may be met
by labeling an IDC connector or group of IDC connectors with the “a” portion of the identifier, and the section of
an IDC connector terminating a four pair cable labeled with the “n” portion where:
a = one to two alpha characters uniquely identifying an IDC connector, or a group of IDC connectors,
serving as part of the horizontal cross-connect
n = two to four numeric characters designating the section of an IDC connector on which a four pair
horizontal cable is terminated
For example:
“B04” = IDC block B, position 04
Panduit labels for laser/ink jet and thermal transfer printers can be generated by a mechanical
device and are made of durable polymer construction that will withstand the effects of
moisture, heat, and time.
Desktop Laser/Ink Jet Labels
Part Number
C750X050Y1J
Part Description
White, non-adhesive polyester label, 110
block identifier.
Width
In.
mm
7.50 190.50
Height
In.
mm
.50
12.70
Std.
Pkg.
Qty.
500
Std.
Ctn.
Qty.
2500
Height
In.
mm
.50
12.70
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
Order number of labels required in multiples of Standard Package Quantity.
TDP43MY Desktop Thermal Transfer Labels
Part Number
C750X050Y1T
Part Description
White, non-adhesive polyester label, 110 block.
Width
In.
mm
7.50 190.50
Order number of labels required in multiples of Standard Package Quantity.
PanTher ™ LS8E Hand-Held Thermal Transfer Printer Label Cassette
Part Number
C750X050Y1C
Part Description
White, non-adhesive polyester label, 30/cassette,
110 block identifier.
Width
In.
mm
7.50 190.50
Height
In.
mm
.50
12.70
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
Order number of cassettes required.
17
For service and technical support, call 800-777-3300 or visit www.panduit.com
Firestopping Location Identification
Section 6.1.3 States
A Firestopping Location (FSL) identifier shall identify each installation of firestopping material.
The format for the firestopping location identifier shall be “f-FSLn(h)”, where:
f
= numeric character(s) identifying the floor of the building occupied by the TS
(Telecommunications Space)
FSL = an identifier referring to a Firestopping Location
n
= two to four numeric characters identifying one firestopping location
h
= one numeric character specifying the hour rating of the firestopping system
All firestopping location identifiers in a single infrastructure should have the same format where possible.
Each firestopping location shall be labeled at each location where firestopping is installed, on each side of the
penetrated fire barrier, within 300mm (12 in.) of the firestopping material.
For example:
“1-FSL01(2)” = first floor, Firestopping Location
number 01, two hour rating
Panduit labels for laser/ink jet and thermal transfer printers can be generated by a mechanical
device and are made of durable polymer construction that will withstand the effects of
moisture, heat, and time.
Desktop Laser/Ink Jet Labels
Part Number
C200X100FJJ
Part Description
White, polyolefin label.
Width
In.
mm
2.00
50.80
Height
In.
mm
1.00
25.40
Std.
Pkg.
Qty.
1000
Std.
Ctn.
Qty.
5000
Height
In
mm
1.00
25.4
Std. Std.
Pkg. Ctn.
Qty. Qty.
2500 10000
Order number of labels required in multiples of Standard Package Quantity.
TDP43MY Desktop Thermal Transfer Labels
Part Number
C200X100YPT
Part Description
White, polyester label.
Width
In
mm
2.00
50.8
Order number of labels required in multiples of Standard Package Quantity.
PanTher™ LS8E Hand-Held Thermal Transfer Printer Label Cassette
Part Number
C200X100YPC
Part Description
White, high tack polyester label, 200/cassette.
Order number of cassettes required.
18
Width
In.
mm
2.00
50.8
Height
In.
mm
1.00
25.4
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
Horizontal Link Identification – Connectors
Section 5.1.2 States
A horizontal link identifier, unique within the building, shall be assigned to each horizontal link and to its elements.
In the work area, each individual telecommunications outlet/connector shall be labeled with the horizontal link
identifier. The labeling shall appear on the connector, faceplate, or MUTOA, in a way that clearly identifies the
individual connector associated with the particular identifier. A horizontal link identifier shall have a format of
“fs-an” where:
f = numeric character(s) identifying the floor of the building occupied by the TS (Telecommunications Space)
s = alpha character(s) uniquely identifying the TS on floor f, or the building area in which the space is located
a = one to two alpha characters uniquely identifying a single patch panel or a group of patch panels with
sequentially numbered ports, an IDC connector or a group of IDC connectors, serving as part of the
horizontal cross-connect
n = two to four numeric characters designating the port on a patch panel in the TS or the section of an IDC
connector on which a four pair horizontal cable is terminated in the TS
For example:
“1A-B01” = origination point first floor,
TS A, patch panel B, position 01
Panduit labels for laser/ink jet and thermal transfer printers can be generated by a
mechanical device and are made of durable polymer construction that will withstand the
effects of moisture, heat, and time.
Desktop Laser/Ink Jet Labels
Part Number
C138X019FJJ
Part Description
White, polyolefin label, Mini-Com ®
Module identifier.
Width
In.
mm
1.38
35.05
Height
In.
mm
.19
4.83
Std.
Pkg.
Qty.
2500
Std.
Ctn.
Qty.
12500
Height
In.
mm
.19
4.83
Std.
Pkg.
Qty.
2500
Std.
Ctn.
Qty.
10000
Order number of labels required in multiples of Standard Package Quantity.
TDP43MY Desktop Thermal Transfer Labels
Part Number
C138X019YPT
Part Description
White, polyester label, Mini-Com ®
Module identifier.
Width
In.
mm
1.38
35.05
Order number of labels required in multiples of Standard Package Quantity.
PanTher ™ LS8E Hand-Held Thermal Transfer Printer Label Cassette
Part Number
C138X019FJC
Part Description
White, polyolefin label, 200/cassette, Mini-Com ®
Module identifier.
Width
In.
mm
1.38
35.05
Height
In.
mm
.19
4.83
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
Order number of cassettes required.
19
For service and technical support, call 800-777-3300 or visit www.panduit.com
Thermal Transfer Printers
Section 10.1 States
The size, color, and contrast of all labels should be selected to ensure that the identifiers are easily read. Labels
should be visible during the installation of and normal maintenance of the infrastructure. Labels should be
resistant to the environmental conditions at the point of installation (such as moisture, heat, or ultraviolet light),
and should have a design life equal to or greater than that of the labeled component.
Section 10.2 States
To maximize legibility, all labels shall be printed or generated by a mechanical device.
The PanTher ™LS8E Hand-Held Thermal Transfer Printer and the TDP43MY Desktop Thermal
Transfer Printer mechanically generate labels that are made of durable polymer construction
and will withstand the effects of moisture, heat, and time.
PanTher™ LS8E Hand-Held Thermal Transfer Printer and Accessories
• Innovative QWERTY keypad design delivers faster text
entry and label design for enhanced productivity
• Cut-to-length functionality eliminates label waste and
label trimming labor
• Partial cut feature available to provide tear-apart strips
of labels
• P1™ Label Cassette contains an integrated memory
device for automatic formatting, recall of last legend
used, and number of labels remaining in the cassette
• Market specific labeling tools simplify label creation for
network components, panel building, and construction
and maintenance
LS8EQ
• USB interface for importing data, system upgrades, and
printing from a wireless laptop or desktop computer
• Legends can be easily aligned with ports on patch
panels and faceplates, eliminating the need for
manual spacing and guesswork
• Prints self-laminating cable labels, continuous tapes, and
die-cut labels for patch panels, faceplates, and other
network applications
• Fast loading label cassette includes both label material and
ribbon to make changing labels easy
• Large graphic display with backlight for improved visibility
LS8EQ-KIT
Part Number
LS8EQ-KIT
Part Description
Includes LS8EQ printer with QWERTY keypad, one cassette of S100X150VAC self-laminating
labels, six AA alkaline batteries, LS8-CASE, LS8-PCKIT, LS8-IB, LS8-WS, quick reference card
and operator’s manual.
LS8EQ
Includes LS8EQ printer with QWERTY keypad, one cassette of S100X150VAC self-laminating
labels, six AA alkaline batteries and quick reference card.
1
4
LS8E-ACS*
120 VAC power adapter for North America.
1
6
LS8-CASE
Rigid carrying case.
1
—
LS8-PCKIT
Includes USB cable and PC interface software for importing data, system upgrades, or printing from
a wireless laptop or desktop computer.
1
—
LS8-IB
Protective impact bumper.
1
20
LS8-WS
Wrist strap.
1
20
LS8-CLN
LS8/LS8E cleaning kit – contains bottle of cleaning solution with MSDS, cleaning pen, swabs,
alcohol wipes and cleaning instructions.
1
—
*Cannot be used to charge batteries. Other adapters available, replace S with A (Australia), C (China), E (Europe) and U (UK).
For a PanTher™ LS8E full line product bulletin, request SA-IDCB51.
20
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
2
TDP43MY Desktop Thermal Transfer Printer and Accessories
• Compact, lightweight design enables use in office or
remote locations
• 300 dpi thermal transfer printer creates crisp, clear
legends with superior legibility
• Up to 2.00" per second print speed for fast label
production
TDP43MY
• Use to print a wide variety of self-laminating labels,
component labels, non-laminated labels, heat shrink
labels, marker plates and continuous tapes up to
4.00" wide
• Easy-Mark ™ Labeling Software and hybrid ribbon included
with printer
• Compatible with most standard PCs
TDP43M-CASE
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
—
Part Number
TDP43MY
Part Description
300 dpi printer; includes printer, Panduit® Easy-Mark ™ Labeling Software, RMH4BL hybrid black
ribbon, AC power adapter with US and Europlug power cords, manual and quick start card.
TDP43M-RS
External label roll stand – used to rear feed labels that are supplied on 3.00" cores, such as
photoluminescent tape.
1
—
TDP43M-CASE
Hardside carrying case. Accommodates printer, AC power adapter, ribbons, printer cable, labels
and tools.
1
—
TDP43M-ACY
Replacement AC power adapter with power cord (US cord only).
1
—
PTR-CLN
Printer cleaning kit – contains bottle of cleaning solution with MSDS, cleaning pen, swabs, alcohol
wipes and cleaning instructions.
1
—
21
For service and technical support, call 800-777-3300 or visit www.panduit.com
Labeling Software
Section 10.1 States
The size, color, and contrast of all labels should be selected to ensure that the identifiers are easily read.
Labels should be visible during the installation and normal maintenance of the infrastructure. Labels
should be resistant to the environmental conditions at the point of installation (such as moisture, heat, or
ultraviolet light), and should have a design life equal to or greater than that of the labeled component.
Section 10.2 States
To maximize legibility, all labels shall be printed or generated by a mechanical device.
Laser/Ink jet and Thermal Transfer printers mechanically generate labels made of durable
polymer construction that will withstand the effects of moisture, heat and time.
Ultimate ID ® Network Labeling System Software
• Ultimate ID ® Network Labeling Software is included at no
charge with each package of laser/inkjet labels
• Fast and easy creation of labels for Ultimate ID ® Network
Labeling System patch panels, faceplates, surface mount
boxes and marker ties
• Create alpha and numeric serializations
• ODBC (Open Data-Base Connectivity) allows importing of
information from electronic databases such as EXCEL^ and
ACCESS^ directly onto the label formats
• Ultimate ID ® System formats are preloaded and ready to use
• On-line help function files, including the TIA/EIA-606-A
Labeling Compliance Brochure that assists in understanding
the TIA/EIA-606-A standard
• Easy to install and supplied on CD-ROM
• Image library that includes commonly used symbols for fax,
data, and voice
• Automatically aligns legends with ports on patch panels
and faceplates
• Vertical line function enables users to separate legends
• Automatic font sizing
• Supports most WINDOWS^ printer drivers and is compatible
with standard desktop laser and ink jet printers
• Ultimate ID ® Software is part of a complete system for
identification designed to efficiently support TIA/EIA-606-A
standard labeling requirements
System Requirements:
• WINDOWS^ 95, 98, Me, 2000, NT 4.x or XP; minimum 486
processor; minimum 10 MB of RAM; 30 MB hard drive space
Easy-Mark ™ Labeling Software
• Easy-Mark ™ Labeling Software simplifies label creation for
the specific needs of your applications
• Instructions and user interface are available in English,
French, German, Italian, Spanish, Korean, Chinese
and Portuguese
• Intuitive interview process allows automatic generation of
compliant labels and signs
• Software selects and formats the optimum label
• WYSIWYG (What You See Is What You Get) user interface,
alpha/numeric serialization, data import, symbol import
Part Number
PROG-EMCD3
• Easy-Mark ™ Labeling Software is part of a complete line
of innovative identification solutions from Panduit
• Supports most WINDOWS^ fonts drivers for standard
thermal transfer, dot matrix, laser and ink jet, including
Panduit thermal transfer printers
System Requirements:
• WINDOWS^ 2000, XP, or Vista; 64MB hard drive space
and 64MB RAM (256MB RAM recommended)
Part Description
Easy-Mark™ Labeling Software, supplied on CD-ROM.
Std. Std.
Pkg. Ctn.
Qty. Qty.
1
10
Order number of software packages required.
^WINDOWS is a registered trademark of Microsoft Corp. in the United States and/or other countries.
22
Labeling Accessories
Ultimate ID ® Write-On Labels
• Write-on labels for use in Ultimate ID ® Faceplates, Surface Mount Boxes and Patch Panels
Part Number
UIWOL1-L
UIWOL2-L
UIWOL3-L
UIWOL4-L
UIWOL6-L
Part Description
1-port, white non-adhesive polyester
write-on label.
2-port, white non-adhesive polyester
write-on label.
3-port, white non-adhesive polyester
write-on label.
4-port, white non-adhesive polyester
write-on label.
6-port, white non-adhesive polyester
write-on label.
Width
Height
In. mm In. mm
.680 17.3 .236 5.99
Std.
Pkg.
Color Qty.
White 50
Std.
Ctn.
Qty.
250
1.315 26.7 .236 5.99
White
50
250
1.950 27.4 .236 5.99
White
50
250
2.585 65.6 .236 5.99
White
50
250
3.855 97.9 .236 5.99
White
50
250
The TIA/EIA-606-A standard states that all labels shall be mechanically generated, write-on labels are not
standard compliant.
Permanent Marking Pens
• Fast drying permanent ink
• Can be used with write-on labels shown in this section
Part Number
PFX-0
PFX-2
Part Description
Permanent marking pen – fine tip.
Permanent marking pen – fine tip.
Ink
Color
Black
Red
Std. Std.
Pkg. Ctn.
Qty. Qty.
12
144
12
144
The TIA/EIA-606-A standard states that all labels shall be mechanically generated, write-on labels are not
standard compliant.
Ultimate ID ® Replacement Label Covers and Screw Covers
• Replacement label and screw covers available for use with Mini-Com ® Ultimate ID ® Faceplates,
Patch Panels, Hook & Loop Marker Ties and Surface Mount Boxes
Part Number
UILC1CL-X
Part Description
1-port label or screw cover.
UILC2CL-X
UILC3CL-X
UILC4CL-X
UILC6CL-X
2-port
3-port
4-port
6-port
label
label
label
label
cover.
cover.
cover.
cover.
Std.
Pkg.
Color‡ Qty.
Clear
10
Clear
Clear
Clear
Clear
10
10
10
10
Std.
Ctn.
Qty.
100
100
100
100
100
‡For other colors replace CL (Clear) with appropriate color designation to match Ultimate ID ® component.
Ultimate ID ® Icons
• Provides port identification of data and
voice applications
• Snaps into Mini-Com ® Ultimate ID ® Faceplates,
Patch Panels and Surface Mount Boxes
Part Number
UICIDIW-C
Part Description
Plastic snap-in icon with data image.
Std.
Pkg.
Color‡ Qty.*
Off White 100
UICIPIW-C
Plastic snap-in icon with phone image.
Off White
‡For colors other than Off White, replace IW suffix at end of part number with EI (Electric Ivory),
WH (White), IG (International Gray), BL (Black), OR (Orange), RD (RED), BU (Blue), GR (Green),
YL (Yellow) or VL (Violet).
Ultimate ID ® Icons are not TIA/EIA-606-A standard compliant.
For service and technical support, call 800-777-3300 or visit www.panduit.com
Std.
Ctn.
Qty.
1000
100 1000
23
TIA/EIA-606-A Description Summary
The TIA/EIA-606-A standard establishes guidelines for owners, end users, manufacturers, consultants,
contractors, designers, installers and facilities administrators involved in the administration of the
telecommunications infrastructure.
Four classes of administration are specified in the standard, to accommodate diverse degrees of
complexity present in the telecommunications infrastructure. The specifications for each class include
requirements for identifiers, records, and labeling.
addresses the administration needs of a premise that is served by a single
Telecommunications Space (TS) containing its telecommunications equipment.
Required in class 1 administration are identifiers for the TS, any Telecommunications Main Grounding
Busbar, and all elements of the horizontal links.
Class 1
For a copper horizontal link, the elements include:
• the connecting hardware (e.g., patch panel port or the section of a punchdown block terminating a
four pair horizontal cable)
• a four pair horizontal cable
• a telecommunications outlet/connector terminating a four pair horizontal cable in the work area
If a Consolidation Point (CP) is present:
• the segment of four pair horizontal cable extending from the TS to the CP connecting hardware
• the CP connecting hardware or section of a punchdown block terminating a 4-pair horizontal cable
• the segment of 4-pair horizontal cable extending from the CP connecting hardware to the
outlet /connector of a Multi-User Telecommunications Outlet Assembly (MUTOA) or to the work area outlet
If a MUTOA is present:
• a telecommunications outlet/connector in the MUTOA
For an optical fiber horizontal link, the elements include:
• a pair of optical fiber terminations on a patch panel in the TS
• a pair of optical fibers in a cable
• a pair of optical fiber terminations in the work area
• a telecommunications outlet/connector terminating a pair of optical fibers in the work area
If a Consolidation Point (CP) is present:
• the segment of optical fiber cable extending from the TS to the CP connecting hardware
• the CP connecting hardware or section terminating a pair of optical fibers
• the segment of optical fiber cable extending from the CP connecting hardware to the outlet /connector
of a MUTOA or to the work area outlet
administration provides for telecommunications infrastructure administration
needs of a single building or tenant that is served by a single or multiple TSs within
a single building. Class 2 administration includes all elements of class 1 administration, plus
identifiers for backbone cabling, multiple-element grounding, and bonding systems, and firestopping.
Class 2
administration addresses the needs of a campus, including its buildings and
outside plant elements. Class 3 administration includes all elements of class 2
administration, plus identifiers for buildings and inter-building cabling. Administration of pathways and
spaces, and of outside plant elements is recommended.
Class 3
administration addresses the needs of a multi-site system. Class 4 administration
includes all elements of class 3 administration, plus an identifier for each site and
optional identifiers for wide area network connections.
Class 4
24
Panduit Identification Products can assist you with all the labeling procedures required by this standard. The
size, color, and contrast of all labels should be selected to ensure that the identifiers are easily read. Labels
should be visible during the installation of and normal maintenance of the infrastructure. Labels should be
resistant to the environmental conditions at the point of installation (such as moisture or heat), and should
have a design life equal to or greater than that of the labeled component. To maximize legibility, all labels shall
be printed or generated by a mechanical device. Panduit provides everything you need to comply with the
TIA/EIA-606-A standard for all of your structured cabling labeling requirements!
Horizontal Link Identifier Labeling Format
A horizontal link identifier shall have a format of fs-an where:
f = numeric character(s) identifying the floor of the building occupied
by the Telecommunications Space (TS)
Floor (1)
s = alpha character(s) uniquely identifying the TS on floor f, or the
Telecommunications
building area in which the space is located
Space (A)
a = one to two alpha characters uniquely identifying a single patch
panel, a group of patch panels with sequentially numbered ports,
Patch Panel ID (A)
an IDC connector or a group of IDC connectors, serving as part
of the horizontal cross-connect
Port ID (004)
n = two to four numeric characters designating the port on a
panel in the TS, or the section of an IDC connector on which a
four pair horizontal cable is terminated in the TS
EXAMPLE – “1A-A004” = Origination Point 1st Floor, Closet A, Panel A, Position 004
Class of Administration
2
3
Identifier
Text
Clauses
Description of Identifier
fs
5.1.1
telecommunications space
R
R
R
R
fs-an
5.1.2
horizontal link
R
R
R
R
fs-TMGB
5.1.3
telecommunications main grounding busbar
R
R
R
R
fs-TGB
5.1.4
telecommunications grounding busbar
R
R
R
R
fs1 /fs2-n
6.1.1
building backbone cable
R
R
R
fs1 /fs2-n.d
6.1.2
building backbone pair of optical fiber
R
R
R
f-FSLn(h)
6.1.3
firestop location
R
R
R
[b1-fs1 ]/[b2-fs2 ]-n
7.1.2
campus backbone cable
R
R
[b1 -fs1 ]/[b2-fs2 ]-n.d
7.1.3
campus backbone pair of optical fiber
R
R
b
7.1.1
building
R
R
c
8.1.1
campus or site
fs-UUU.n.d(q)
annex B
intra-space pathway
O
O
O
fs1 /fs2-UUU.n.d(q)
annex B
building pathway
O
O
O
1
4
R
c-UUU.n.d(q)
annex B
outside plant pathway
O
O
[b1-fs1 ]/[b2 -fs2 ]-UUU.n.d(q)
annex B
campus pathway
O
O
[c1 -b1 -fs1 ]/[c2 -b2 -fs2 ]-UUU.n.d(q)
annex B
inter-campus element
O
R = required identifier for class, when corresponding element is present
O = optional identifier for class
25
Real-World Solutions to Ensure
the Success of Our Customers
With a proven reputation for excellence and technology innovation, a
robust ecosystem of global partners, and long-term alliances with top
industry leaders, Panduit is a valuable, trusted partner offering strategic
vision and real-world solutions to ensure the success of our customers.
Innovative Technology Leadership
Panduit is an industry leader in developing innovative technology solutions
that meet the rapidly evolving needs of our customers around the world.
Our commitment to continued leadership is supported by significant ongoing
investment, dedicated manufacturing facilities, strategic technology alliances,
and collaborative R&D with other industry leaders.
Transform Your
Physical Infrastructure.
Global Business & Commitment
Call or visit us online,
Panduit’s ongoing commitment to excellence and our technology alliances with
we can show you how.
key industry leaders such as Cisco Systems, EMC, Emerson, IBM, etc., enables
Panduit Corp.
our highly skilled and knowledgeable global sales, systems engineering, and
technical support teams to engage with critical customer challenges that range
Worldwide Headquarters
Tinley Park, IL 60487
from initial problem determination all the way to resolution. Local specialists,
trained to global standards and competencies, provide consistent regional
support that brings value to local business. Our global value chain, which
combines manufacturing, distribution, and service, provides prompt responses
to customer-related issues, and streamlines procurement and delivery to any
global destination.
Best-in-Class Partner Ecosystem
Panduit employs a consultative approach to identify customer needs and engage
cs@panduit.com
US and Canada: 800.777.3300
Europe, Middle East and Africa:
44.208.601.7200
Latin America: 52.33.3777.6000
Asia Pacific: 65.6305.7575
appropriate partners in a collaborative fashion to serve our customers. Panduit’s
robust ecosystem of architects, consultants, engineers, designers, systems
integrators, contractors, and distributors offer a full portfolio of lifecycle services.
Our partners are trained on relevant services to Plan & Design, Build & Deploy,
and Maintain & Operate to deliver predictable and measurable results.
Worldwide Alliances
Panduit has established long-term strategic alliances with top global industry
leaders such as Cisco Systems, EMC, HP, IBM, Liebert, and Rockwell Automation
to develop and integrate innovative, holistic solutions for our customers. We
continually invest in relationships and resources for solving our customers’
greatest business challenges.
Eco-Sustainability & Global Citizenship
With a long-standing commitment to environmental excellence, Panduit
continually develops and implements solutions designed to protect, replenish
and restore the world in which we live and operate. This commitment is
demonstrated by Panduit’s LEED-certified new world headquarters and
future green building plans using its own revolutionary Unified Physical
Infrastructure SM vision to enable convergence of critical systems for
driving sustainability.
© 2010 Panduit Corp.
ALL RIGHTS RESERVED.
WW-IDCB55
7/2010
www.panduit.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising