EL-USB-1 Temperature Data Logger The EL-USB-1 temperature data logger measures and stores up to 16,382 temperature readings over a -35 to +80°C (-31 to +176°F) range. Easily set up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and running the purpose-designed software that allows you to easily graph, print and export data to other applications. The EL-USB-1 data logger is supplied with a long-life lithium battery which can typically allow logging for more than 1 year. Function and alarm states are indicated by flashing red, green and orange LEDs. The data logger is protected against moisture to IP67 standard when the protective cap is fitted. Features Programmable Elements • -35 to +80°C (-31 to +176°F) Measurement Range • Logger Name • USB Interface for Set-up and Data Download • °C, °F • 2 User-Programmable Alarm Thresholds • Logging Rate (10s, 1m, 5m, 30m, 1hr, 6hr, 12hr) • Bright Red, Green and Orange LED Indication • High and Low Alarms • Replaceable Internal Lithium Battery • Start Date and Start Time • IP 67 Protection (totally protected against dust; protected against liquid immersion up to 1m) Record Times Sampling Interval Record Times 1 sample every 10 seconds 45 hours 1 sample every minute 11 days 1 sample every 5 minutes 56 days 1 sample every 30 minutes 11 months 1 sample every hour 1.8 years 1 sample every 6 hours > 2 years 1 sample every 12 hours > 2 years DATAQ Instruments, Inc. • 241 Springside Drive • Akron, Ohio 44333 • Tel: 330-668-1444 • Email: firstname.lastname@example.org • www.dataq.com LED Flashing Modes The EL-USB-1 data logger features 2 LEDs: The first LED flashes green or red to indicate alarm level status; The second LED flashes orange to indicate a problem condition on the EL-USB-1. The logger will flash red when the logged temperature has exceeded a Low or High alarm level. “Hold” mode is disabled by default. In this mode the red LED will no longer continue to flash after the logged temperature has returned to normal from an alarm condition. “Hold” can be turned on via the control software. In this mode, the red LED that indicates an alarm condition will continue to flash, even after the logged temperature has returned to normal. The red LED will effectively be held in its alarm condition. This ensures that the user is notified that an alarm level has been exceeded, without the need to download the data from the logger. Green Double Flash The data logger is not currently logging, but is primed to start at a later date and time (delayed start). Green Single Flash The data logger is currently logging. No alarm. Green and Orange Single Flash The data logger is full and has stopped logging. No alarm. Red Single Flash The data logger is currently logging. Low alarm. Red and Orange Single Flash The data logger is full and has stopped logging. Low alarm. Red Double Flash The data logger is currently logging. High Alarm. Red and Orange Double Flash The data logger is full and has stopped logging. High alarm. Orange Single Flash The battery is running low as its voltage has dropped below 3.3V. Data logging will continue until the battery voltage drops below 2.8V. Red/Green LED Orange LED No LEDs Flash The data logger is stopped, the battery is dead, or there is no battery. 330-668-14442 www.dataq.com Accessories and Options Optional Case Rugged metal alloy design for harsh conditions. Waterproof to IP-67/NEMA-4X 1.1 (28) 4.7 (119) Dimensions 1.02 (25.9) 3.86 (98.0) Dimensions shown are inches (mm) Specifications Specification Measurement Range Minimum Typical -35 (-31) Internal Resolution 0.5 (1) Accuracy (overall error) ±1 (±2) Logging Rate every 10s Memory Capacity Operating Temperature Range Battery Life Maximum Unit +80 (176) °C (°F) °C (°F) °C (°F) every 12hr - 16,382 -35 (-31) samples +80 (176) °C (°F) 1* Year *@ 25 °C and 1m logging interval. EL-USB-1 Ordering Information Description Order Number Temperature Data Logger Includes EL-USB-1 data logger, software on CD, and battery. EL-USB-1 Battery Replacement battery. BAT 3V6 Case Rugged metal alloy design for harsh conditions. Waterproof to IP-67/NEMA-4X EL-USB-CASE www.dataq.com3 330-668-1444 EL-WIN-USB Software Easy to Program and Deploy Getting an EasyLogger product ready to acquire data is simple: 1. Remove the protective USB cover. 2. Plug the instrument into any convenient USB port (image 1). 3. Program the data logger with the provided EasyLog software (image 2): • Give the logger a unique name (convenient when deploying multiple units). • Select the required sample rate. • Select high and/or low alarm thresholds. • Select the specific date and time to begin logging. Now remove the data logger from the USB port, replace the USB cover, and deploy the instrument wherever you need it. Easy to Upload and Analyze Data Whether you want to review stored data using the supplied application or using Microsoft Excel, getting meaningful results from recorded data is fast and easy: 1. Remove the protective USB cover. 2. Plug the instrument back into the PC’s USB port. 3. Use EasyLog software to stop recording, access the instrument’s stored data, and save it to a file that you name on the PC, all in one easy operation. The file format is Excelcompatible. 4. Immediately EasyLog’s Graph utility is enabled to display all the stored data in one compressed view. 5. A cursor allows you to determine signal magnitude and time and date of acquisition for any value, and a magnifier utility allows you to zoom in for a closer look over any range – Easy and fast. 6. For more custom analysis and report generation, simply import the stored data file to Microsoft Excel for virtually unlimited flexibility in how you view and interpret your results. 330-668-14444 www.dataq.com EL-DataPad 2.8 inch Full color touch-screen display Easy-to-use menu to Set Up data loggers; Download data from logger; View Data; and Instrument settings (Time/Date, Power, Status) On/Off button ON = Single press OFF = Press and hold for 3 seconds The EL-DataPad allows users of certain EL-USB data loggers to configure their units, upload data, and view logging results on-thespot rather than moving the logger to their PC. This allows shorter breaks in data collection for more data continuity, less travel time, and on-the-spot data review and data logger reconfiguration. The logger is connected to the EL-DataPad via a standard USB port at the top of the viewer. Once connected, you are guided through a simple touchscreen menu with options to Set-Up Logger, Stop Logger & Download and View Data. On-screen instructions follow the same structure as EL-USB-WIN software for the PC currently provided with each data logger. Data from up to 100 loggers can be viewed on the EL-DataPad, with data from a further 400 units stored on the unit at any one time. Data can be transferred to a PC using a micro USB cable supplied with the unit. Once uploaded, data is saved in comma separated variable (csv) format, making it suitable for import into spreadsheet programs such as Microsoft Excel or graphed on a PC using ELWIN-USB software. Features • Archive capacity for up to 500 logger uploads • View uploaded data with general trend and summary reports • Allows full or quick set-up of compatible EL-USB data loggers • Touch screen interface for navigation of menus • 2.8 inch full color TFT display • Stored data can be transferred to a PC via micro USB cable • Rechargeable internal built-in lithium battery provides up to 8 hours of use between charges Compatible EL-USB Data Loggers The EL-DataPad is compatible with the following Data Loggers: • EL_USB-LITE • EL-USB-1 • EL-USB-1-LCD • EL-USB-1-PRO • EL-USB-2 • EL-USB-2+ • EL-USB-2-LCD • EL-USB-2-LCD+ • EL-USB-TC • EL-USB-TC-LCD www.dataq.com5 330-668-1444 EL-USB Data Logger Series Overview EasyLog Products for Any Application From temperature and humidity to carbon monoxide trending, there’s an EasyLog data logger that’s right for you. Click on “Go” to go to the product’s web page. Measurement Model EL-USB (click on page number to jump to page) Function Range -LITE Temperature -10 to +50°C (+14to +122°F) Go Temperature -35 to +80°C (-31 to +176°F) Temperature -20 to +60°C (-4 to +140°F) High Temperature -40 to +125°C (-40 to +257°F) Humidity, temperature, dew point 0 to 100% RH -35 to +80°C (-31 to +176°F) Voltage 0 to 30 VDC Process current 4 to 20 mA Event, State, Count 3-28 VDC Current -1000 to 1000 mV Carbon monoxide 0 to 1000 ppm Thermocouple -130 to +900°C -200 to +1300°C -200 to +350°C -1 -1LCD Go Go -1RCG -1PRO -2 -2+ -2LCD -2LCD+ -3 -4 -5 -ACT -CO -TC -TCLCD -TPLCD -TPLCD+ Go Go Go Go Go Go Go Go Go Go Go Go Go Go Go www.dataq.com6 330-668-1444 Lascar Data Logger Product Lines EL-USB Data Loggers EL-GFX Data Loggers EL-WiFi Data Loggers Lascar EasyLog model EL-USB series products are a line of low cost, compact, battery-operated data loggers with built-in memory and a USB interface for easy setup and data download. Each product in the line offers a specific measurement function (including temperature, voltage, process current, and more). The EL-GFX line of data loggers is the latest release from Lascar Electronics with similar functionality of the EL-USB series with an added graphic display for data. Lascar’s EL-Wifi Data Logger series products are low cost, compact, battery-operated data loggers with wireless connectivity to any PC over a WiFi router. Each product in the line features a large, easy-to-read display of current measurements, and is purchased for specific measurement functions. 241 Springside Drive Akron, Ohio 44333 Phone: 330-668-1444 Fax: 330-666-5434 Data Acquisition Product Links (click on text to jump to page) Data Acquisition | Data Logger DATAQ, the DATAQ logo and WinDaq are registered trademarks of DATAQ Instruments, Inc. All rights reserves. Copyright © DATAQ Instruments, Inc. The information on this data sheet is subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project