t6000 range command

t6000 range command
New Holland prefers
lubricants
NEW HOLLAND.
A real specialist in your agricultural business.
AT YOUR OWN DEALER
Visit our web site for UK: www.newholland.com/uk - for ROI: www.newholland.com/ie
A S K F O RVEA!
TEST DRI
The data indicated in this folder are approximate. The models described here can be subjected to modifications without any notice by the manufacturer.
The drawings and photos may refer to equipment that is either optional or intended for other countries. Please apply to our Sales Network for any further
information. Published by New Holland Brand Communications. Bts Adv. - Printed in Italy - 04/08 - TP01 - (Turin)
NEW HOLLAND
T6000 RANGE COMMAND™ AND POWER COMMAND™ TRACTORS
T6050
I
T6070
I
T6080
T6000 RANGE COMMAND™
Range Command™ and Power Command™ transmissions.
Mechanical efficiency with ultra-modern control.
Range Command™ and Power Command™ transmissions,
also fitted to the acclaimed New Holland T7000 series,
both offer 19 forward and 6 reverse speeds as standard.
Range Command provides six-powershift speeds in three ranges
while the full - powershift Power Command provides a seamless
shift between all 19 forward speeds. Just look at some of
the advanced features these well-proven transmissions offer.
• Both transmissions come as standard with a Direct Drive 19th
ratio for 40kph EcoDrive or 50kph transport speeds.
Electronically engaged creep speeds, which extend the ratios
on offer to 29x12, can also be specified.
• A smooth operating powershuttle ensures changing
direction, in yard or field, is fast, smooth and simple.
• New Holland IntelliShift™ shift logic measures engine speed,
transmission oil temperature and transmission shaft speeds to
ensure that the ratio selected engages smoothly. Smooth shifts
make it easier to exploit the tractor’s performance under full load.
• Set Auto Field and the transmission will shift up or down to
deliver maximum performance or economy. You decide.
• Select Auto Transport and the transmission will manage all ratio
changes, both up and down, according to forward speed and
engine load.
4 MAXIMUM VERSATILITY
8 PRODUCTIVITY AND POWER
12 ULTIMATE COMFORT
16 QUALITY AND RELIABILITY
22 SPECIFICATIONS
1720rpm*
2200rpm
* T6070 19x6 40kph ECO model shown.
2
kph
OR T6000 POWER COMMAND™ TRACTORS?
T6000 - optimised to meet your every need
With T6050, T6070 and T6080, New Holland versatility comes as standard.
For yard and field
A T6000 is a tractor that can suit any operation or operator. Its main systems are controlled by straightforward rocker switches or dials. There are no complicated screen menus to adjust the basic functions.
Extra power as standard
Standard Engine Power Management (EPM) intelligently delivers up to 34hp more in PTO and transport
applications, but only when it is needed. EPM delivers a perfect balance between performance and economy.
Fast and secure transport
Both Range and Power Command tractors can be specified with a direct drive 50kph* transmission, a braked
and suspended Terraglide™ front axle and, to complete the package, pneumatic trailer brakes. These tractors
provide fast, comfortable and safe transport with extra performance delivered by EPM.
Automatic control
Auto PTO looks after the engagement and disconnection of the PTO during a turn. Engine Speed Management
(ESM) takes care of the engine power delivery, ensuring a constant PTO speed under changing loads.
Headland Turn Sequencing (HTS) can learn repetitive actions and repeat them automatically.
T6000 Range Command or T6000 Power Command. Combining optimised performance and versatility.
*50kph transmissions are linked to Terraglide with front axle and air brakes as standard. Market restrictions apply.
3
Maximum
Versatility
WHAT IS IT THAT MAKES THESE
TRACTORS SO VERSATILE?
What sets T6000 six-cylinder Range Command and Power Command tractors
apart is their genuine versatility. Light but strong, the tractors can not only be
specified to match specific demands, but they also come with class leading
features and advanced load-sensing hydraulics as standard.
4
174hp
166hp
155hp
ENGINE OUTPUT 155hp
PTO OUTPUT 140hp
FORWARD SPEED 8kph
150hp
EPM brings more power, but only when its needed
Range Command and Power Command T6000 tractors all feature
Engine Power Management (EPM), as standard. This versatile feature
allows the tractor to produce extra power and torque in demanding
transport or PTO applications. This makes these tractors extremely
versatile. More power is available, but only when it is needed.
EPM delivers power levels normally associated with larger and heavier
tractors which deliver excellent power to weight ratios.
ESM for precision
A versatile tractor needs to be equally suited to
PTO and heavy draft applications. With Engine
Speed Management (ESM), the advanced engine
management system will precisely fuel the
engine so it will accommodate fluctuations
in engine load whilst maintaining the desired
engine speed. For convenience, two engine
speeds can be memorised. The operator can
then simply toggle between the speeds using
a button on the transmission controller.
5
MAXIMUM VERSATILITY
Versatile agility with 65° SuperSteer™ front axle
Unique to New Holland tractors, SuperSteer™ adds an extra
dimension to T6000 tractors; rowcrop agility. Offering a turn
radius as tight as 3.8m, no tractor in this power category can
turn tighter than a SuperSteer™ T6000, allowing it to be used in
applications that traditionally call for a smaller and less powerful
model. It is not just specialist applications that benefit either.
A SuperSteer™ tractor can reduce the time spent turning on
the headland by up to 35%.
6
Heavy-duty axles
They may be light, but do not mistake this
for lacking in strength. All T6000 tractors
are specified with axles to match their
power. This ensures the tractor has the
strength to safely exploit the capacity
of the rear linkage and, if fitted, a front
loader or front linkage. It also ensures
that excellent power to weight ratios
are achieved throughout the range.
Plug and Play ISO BUS compatibility
The IntelliView™ II in-cab information
monitor can do so much more than
detail tractor functions. Fully ISO BUS
compatible, it can be used to operate
a range of equipment to include balers
and top dressers. This saves the need
for a separate control within the cab and
reduces the time to switch between jobs.
7
Productivity
and Power
Engineered to perform in agriculture. Purpose designed. Purpose built.
New Holland T6000 tractors represent the pinnacle of European tractor development.
Matched to the proven transmissions from the outstanding award winning T7000 tractor series,
T6000 models feature the most advanced power units ever developed for agriculture.
Manufactured exclusively by New Holland, the exceptionally quiet six-cylinder engines of the T6050, T6070
and T6080 models feature advanced common rail fuel injection. Invented by the FIAT Group, common rail
delivers precise levels of fuel at extremely high pressure. The result; total atomisation of the fuel and efficient
combustion. Linked to advanced electronic engine management, the injection system ensures the engine can
operate at peak efficiency and also offer added features. These include Engine Power Management (EPM) and
Engine Speed Management (ESM).
Engineered to meet future emission standards
From the outset, the T6000 engine series has been engineered to meet or exceed not just current but future
emission standards. Advanced gas recirculation, for example, dramatically cuts the amount of NOX gases
produced. Older engine designs have to incorporate systems that compromise efficiency to meet current
demands. With T6000, this is not the case, which in turn means improved efficiency and reduced fuel use.
Fuel efficiency comes as standard
A range of engine design features influence fuel efficiency. These include optimising
gas flow, reducing internal friction, precise fuelling and a good match between
the power unit and its transmission. New Holland engineers have developed
T6000 tractors to optimise fuel use across all engine operating speeds.
This optimises efficiency in transport, in the yard or in the field.
8
EPM – Less Fuel Consumption
To generate more power, an engine needs to consume more fuel. The reverse is
equally true. In light applications, less power is required to maintain the desired
performance. New Holland Engine Power Management exploits this by enabling
the tractor to develop more power to cope with fluctuations in load, but only
when the load demands it. Taking the T6050 as an example, the engine will
deliver between 1hp to 34hp more than its rated 125hp to seamlessly cope
with changes in power demand. This allows productivity to be retained without
the cost of fuelling a tractor rated at a full 159hp.
EPM: Rated power economy, power boost performance.
% Productivity
90
80
70
125hp + 34hp EPM
60
125hp non EPM
Productivity bonus
50
40
0
10
20
30
40
50
60
70
80
90
100
80
90
100
% Engine load
100
90
% Engine speed
ESM – Constant productivity
New Holland Engine Speed Management (ESM) exploits the advanced electronic
engine management system of T6000 Range Command and Power Command
tractors to allow the operator to set a fixed engine speed. With ESM engaged,
the desired engine speed will be maintained as operating conditions vary.
In applications such as working with a high capacity big baler, ESM can help
deliver the constant PTO speed required to produce bale consistent densities
linked to unfailing levels of productivity. If Auto Field has been selected, the tractor
will shift to a lower forward speed to ensure the PTO speed remains fixed.
ESM: Consistent performance in changing conditions.
100
80
ESM
70
non ESM
60
50
Constant productivity
0
10
20
30
40
50
60
70
% Engine load
160
155
150
Engine hp
EPM – Productivity bonus
New Holland Engine Power Management (EPM), allows T6000 tractors to punch
well above their rated power. Taking the T6050 as an example, this tractor is rated
at 125hp. With EPM, however, the engine can deliver up to 34hp more. In work
this can lead to genuine benefits in productivity. As an example, a demanding
PTO job may require an engine with 125hp on level ground. However, to climb
a gradient while maintaining the same output will require more engine power to
be directed to the wheels. With EPM, more power will be delivered automatically,
allowing the tractor to maintain its productivity. Of equal importance, power
output is reduced as loads decrease.
EPM: delivering all the power you need but only when you need it.
145
140
125hp + 34hp EPM
135
160hp rated
130
Less fuel consumption
125
120
0
10
20
30
40
50
60
70
80
90
100
% Engine load
9
PRODUCTIVITY AND POWER
FEATURES TO BOOST
YOUR PRODUCTIVITY
A range of tractor features will combine to boost overall productivity. With their advanced
engines, hydraulics and transmissions, Range Command and Power Command tractors have
the core ingredients to be highly productive. But with New Holland you have added features
that lift these tractors to the highest levels of output.
Headland Turn Sequencing
Automated features are only of use when the
operator feels comfortable setting them up and
using them. New Holland Headland Turn Sequencing
has been refined and developed over several years
to match ease of operation with in-field efficiency.
The system allows the operator to record and store
the sequence of operations at the headland. These
are then being ‘played back’ automatically when
HTS is activated. Simple and a great way to reduce
fatigue over extended working periods.
10
Terralock™ system takes care of traction
Terralock™ is another New Holland feature that has been
developed and refined over several tractor generations.
It is simple to set up and operate. Once selected, the system
will automatically manage engagement of drive to the front
axle and the locking of both front and rear differentials.
Terralock™ ensures full power is directed to the wheels.
Of equal importance it unlocks the differentials as soon
as the steering angle exceeds 30 degrees to ensure optimum
manoeuvrability. When the tractor’s forward speed exceeds
15kph, drive to the front axle is disconnected to reduce the
turning circle and soil smearing.
Fast Steer™ system and SuperSteer™ front axle
Unique to New Holland, both Fast Steer™ and SuperSteer™
can really slash the time it takes to make a headland turn.
Fast Steer™, axles, enables full lock to lock turns to be made
with minimal operator effort , transforming the steering
wheel into a proportional “joystick”. Activated by using a
smaller rim within the standard steering wheel, Fast Steer
can cut the time spent turning on the headland. SuperSteer
is proven to reduce the amount of space required to turn
the tractor. When combined with Fast Steer, even less time
is spent turning meaning more time in productive work.
more productivity
Auto PTO. Does exactly what is says.
Engaging and disengaging the PTO at the right time as the rear linkage and lowered
can be critical; get the timing wrong, and the PTO shaft may be damaged. Add the
need to work a front PTO as well, and the operator needs to get timing spot on.
Repeatedly, even at the end of a long and tiring day. Auto PTO can be set to
automatically engage and disconnect drive to the PTO. Once set, it will use the
position of the front and rear linkages, as applicable, to manage the PTO drive.
Engagement is fully modulated to protect both tractor and implement.
IntelliShift™ system for seamless productivity
Both Range Command and Power Command transmissions feature IntelliShift
gear engagement management. Working from sensors that read the engine speed,
gearbox shaft speeds and the transmission oil temperature, IntelliShift ensures the
selected ratios engage smoothly, regardless of the load on the tractor or the speed
of the engine. In work, seamless shifting optimises the relationship between the
engine and transmission, improving efficiency. For the operator, smooth shifts
make the tractor more comfortable and protects the driveline, maximising component
longevity for reduced whole life operating costs.
Closed Centre Load Sensing hydraulics
Hydraulic efficiency makes an important contribution to the overall performance of the
tractor. With T6000 Range Command and Power Command tractors, the main hydraulic
piston pump delivers up to 113 litres per minute, a separate 65 litre per minute pump
taking care of the steering and engagement of the differentials. Full hydraulic power
is always available at the remote valves and lift linkage, but only as much as is needed.
The CCLS pump only works on demand as you require, reducing fuel consumption.
Remote valves to suit your needs
Four rear remote valves are standard, with a choice of full electronic control
or with mechanical operation with individual flow control. In addition, two remotes
can be fitted in the middle of the tractor to operate a front linkage or loader.
The mid-mount remotes are operated via an integral joystick control in the cab.
Strong, efficient and powerful
Measured at 610mm from the ball ends, the Cat III rear
linkage has a continuous lift capacity of 6616kg. Rated at a
massive 8257kg, the rear linkage and hydraulics are designed
to work with heavy mounted equipment over extended
periods. The system also incorporates integral dynamic ride
control shock load protection. This will reduce bounce when
travelling with a heavy linkage load at transport speeds.
11
Ultimate
comfort
QUIET, COMFORTABLE AND EASY TO DRIVE
Operator comfort remains a key design priority at New Holland. Take a close look at the quality
of the fittings in the T6000 Horizon™ cab. Work the controls and see how they are ergonomically
positioned and grouped to make it easy to know exactly what they do. Settle into the air suspended
seat and enjoy the 360° visibility. Fold down the generously proportioned instructor seat.
There is ample space for two, making it safer and easier for operators to exchange information.
Note how every control is grouped according to its function. Rest your arm on the vehicle control
arm and see how easy it is to operate the key functions.
12
Start the engine, and notice how smoothly it runs. When working or in transport, note how the two stage
Comfort Ride™ cab suspension and the seat work together to provide a smooth ride. When a Terraglide™
suspended front axle is fitted, it further enhances the ride but still offers a tight 55° turn angle.
Automatic climate control is another comfort feature that can be set and left to keep you comfortable
regardless of the conditions outside the cab. Working a New Holland FL loader? The standard hi-visibility
panel in the cab roof lets you keep a close eye on the load as it is raised to its full height. With its separate
power steering pump, the tractor remains agile as a heavy load is raised too.
13
vibration at seat base
ULTIMATE COMFORT
Terraglide™ front axle and Comfort Ride™ cab suspension. Your comfort partners.
Automatic two stage Comfort Ride cab suspension has established itself as a key advance
in operator comfort. Designed to complement the cushioned ride offered by the standard
air suspension seat, Comfort Ride helps reduce fatigue. Terraglide front axle suspension
is recommended in operations that include fast top work and extended transport duties.
Terraglide, with integral hub braking, is standard on tractors specified with a 50kph
transmission.
14
Auto Comfort™ seat
For operators who spend extended hours in the
tractor, the enhanced comfort provided by the
heated Auto Comfort seat is worth considering.
Fitted with a system that actively compensates
for certain shock loads, the Auto Comfort seat
builds upon the in-built comfort of T6000
tractors for an even smoother ride.
Work together: Automation, comfort and productivity
Easy to set up and brilliantly effective, Auto Transport and Auto
Field modes can really reduce the effort required to work a T6000
tractor over a long working day. With Auto Transport, the tractor
will seamlessly shift ratios like an automatic car. It will even sense
if the tractor is being pushed by a loaded trailer while descending a
hill. If it does, it holds the current gear to provide engine braking.
Auto Field allows the operator to dictate how much engine rpm fall
there should be before an auto shift is made. Set it to a low level to
maintain an even engine speed while carrying out PTO work, or a
higher level to utilise the torque back up when ploughing.
15
Quality
and reliability
MANUFACTURED
IN THE UNITED KINGDOM
New Holland tractors are engineered to perform, with extended 600 hour service intervals
and low whole life operating costs. This is achieved by using the very best components and
designs, with quality controlled assembly in the largest and most advanced tractor production
facility in Europe. At every stage of production, your T6000 has to pass through rigorous and
extremely comprehensive quality control checks. When the tractor leaves the production
line, it is dynamically tested by an individual “owner driver” who checks every function and
control. At random, tractors are taken from the line for comprehensive quality checks.
It does not end there. When your dealership takes delivery of your tractor, it will carry
out a range of New Holland specified checks just to make sure everything is working
exactly as it should.
New Holland quality. Designed in. Built in.
16
Longer service intervals. Shorter bills
Quality reduces operating costs. This is
particularly the case with T6000 series
tractors. Tested for over 27,000 hours across
two continents, the proven engineering
allows all models to have 600 hour service
intervals, using conventional oils.
This is the longest routine service interval
in the industry, without any compromise
in performance or longevity. Choose
New Holland to save money and downtime.
Ready for 100% Biodiesel
Once fitted with a suitable filter kit, all
current production New Holland power units,
including those with advanced Common Rail
fuel injection, can run on 100% biodiesel.
This means you can run your new Range
Command or Power Command T6000 on
100% biodiesel without costly modifications.
Also all T6000 tractors will run on 20%
Biodiesel without modification. Talk to your
New Holland dealer for full details.
ISO manufacturing standards - environmental
New Holland is committed to operating in an environmentally
responsible manner. All T6000 tractors are manufactured
in accordance with ISO 9001, the environmental protection
standard that covers all aspects of tractor production.
ISO manufacturing standards - quality
Over the past 5 years, New Holland has invested heavily in new
production facilities at all its tractor manufacturing plants. The key
driver of change has been improved product quality, with ISO 9001
quality standards now applying to the main plants that build tractors
in Europe. New internal quality standards continue to be set that
meet or surpass the requirements needed to satisfy ISO 9001.
17
FACTORY DESIGNED. A PERFECT FIT
AND OPTIMUM PERFORMANCE
Loaders and linkages. Your T6000 is designed for them.
A key design priority for all T6000 tractors, including the powerful Range Command and Power Command models,
was to ensure a front linkage and front loader could be fitted not only on their own but together if required.
Thanks to the structural strength of these versatile and rugged tractors, neither the New Holland front linkage and PTO
systems or New Holland FL front loaders require the addition of bulky side rails. Full engine service access is retained.
Of equal importance, the mid-mount remote valve package used to power the linkage or loader comes with an armrest
mounted joystick. This makes operating an FL much easier. Brilliant ergonomics ensures that the loader is fully
integrated with the tractor. The New Holland front linkage and front PTO also integrate into the full control system
of the tractor, and can be set to operate with HTS Headland Turn Sequencing and the Auto PTO system.
Joined up thinking. Typical New Holland.
Purpose designed for productivity
New Holland FL loaders are purpose-designed for Range
Command and Power Command tractors. From the operator’s
seat, visibility remains excellent when the loader is both at
ground level and, thanks to the standard high visibility roof
panel, when raised progressively to its full lift height. This is an
important design advantage of both the tractor and FL loader and
a key to ensuring the combination can deliver full productivity.
New Holland FL loaders can be specified in four models.
Lift capacities range from 2050kg to 2954kg and maximum lift
heights span 3755mm to 4084mm. (Dependent upon tyre size)
18
85°
VISIBILITY
More than just a front linkage and PTO
New Holland front linkage and PTO combinations are designed so they fully integrate
into the tractor’s control system. Automated features, such as HTS and Auto PTO
can be programmed to include the front linkage, ensuring the operator can enjoy
the productivity benefits of automation. Structurally, all T6000 tractors have been
engineered to accommodate a front linkage, with a direct drive to the front PTO
to minimise power loss. Drive to the PTO is fully modulated to ensure a smooth
progression of power, a key to protecting the driveline of high inertia implements.
The linkage arms fold up when not in use or can be used to carry the full standard weight
pack. The linkage has a lift capacity of 3750kg and incorporates accumulator damping
as standard. The linkage can be set in position, float and locked transport positions.
AFFORDABLE ACCESS TO GPS GUIDANCE
New Holland T6000 tractors have been designed to utilise GPS guidance
technology. Four different systems can be specified to fit both Range Command
and Power Command models, each offering different levels of sophistication to
suit individual customer needs. For more comprehensive information, contact
your New Holland dealer.
EZ Guide Plus™ system: Affordable, accurate and easy to use
The entry level GPS guidance system from New Holland, EZ Guide Plus
uses a light bar and integral multi-view LCD screen to provide the
operator with easy to follow steering guidance. Overlaps and misses can
be avoided, with the system also helping in poor visibility and at night.
EZ Guide Plus is fully portable and can be used in other vehicles. The
most cost effective introduction to farm GPS guidance.
EZ-Guide 500 system: Greater precision. More control
EZ-Guide 500 is the next step up from EZ Guide Plus. Fitted with
an enhanced high definition LCD monitor that is large and easy to see,
EZ-Guide 500 can use an additional GPS receiver to facilitate operation
with a higher accuracy differential correction signal. The system remains
easy to set up and operate and benefits from a USB flash drive port
to allow data to be transferred between it and a PC. This eases
information transfer between office and tractor.
EZ-Steer™ system: Portable hands-free farming
The first step in automated GPS guidance, EZ-Steer
can be connected into the EZ Guide Plus and EZ-Guide
500 systems to add hands-free steering control.
The system uses a removable steering controller
that can be transferred between vehicles for maximum
flexibility. Simple, cost effective and versatile, EZ-Steer
incorporates electronic accelerometers and giro scopes to
ensure tracking accuracy over undulating terrain. The perfect
balance between sophistication, affordability and flexibility.
19
NEW HOLLAND TOP SERVICE
WITH NEW HOLLAND TOP SERVICE,
NEW HOLLAND AND YOUR DEALER
ARE ALWAYS AT YOUR SIDE
Top availability. Managed in partnership with New Holland dealers and
New Holland Parts and Service teams, New Holland Top Service provides
you with total support and up to date information, and is available to you
24/7 through the free phone* number 0800 64 111 111. You can call the
free phone* number at any time to seek advice on items such as the
New Holland dealer network, requests for brochures, product
specifications, product problems, and any other issues.
Top satisfaction. The New Holland Top Service team will track and
chase every query to a satisfactory conclusion. Queries will only be
closed after a final call to ensure you are fully satisfied with the solution.
Feedback from these calls will be used in regular reviews to improve
the process continuously.
Top speed. For product issues the New Holland Top Service team will work
with your dealer and the New Holland Parts and Service organisations to quickly
source any parts required and resolve any technical issue. To ensure parts
reach you when you need them, New Holland dealers have the support of well
established ordering and delivery systems, and can rely on a 24/7 service from
our Parts Depots. To ensure a sustained high level of parts service, advanced
product training sessions are regularly organised for dealer staff.
Top priority. During the harvest season, New Holland understands that
any loss of productivity can be very expensive. For this reason Top Service
Privilege offers extra support and is available for top of the range, high
productivity equipment in warranty. The New Holland Top Service Manager can
draw parts from any facility within the New Holland Parts and Manufacturing
networks, including assembly lines, to guarantee a fast resolution. Using our
priority logistics service, parts will be delivered rapidly to get your machine
back to work as quickly as possible.
New Holland Top Service is designed to give you
peace of mind and keep your business productive.
* Calls to the Top Service team are free from landlines in the United Kingdom and Republic
of Ireland. UK-based mobile calls are also free, but Republic of Ireland mobile users
should call 01 2421881 and this will be charged at your standard network rate.
BEYOND THE PRODUCT
Qualified Dealer Technicians give you
the most professional technical support
A dealer technician certification programme helps ensure
customers get the professional technical support they expect
every time. To support this programme New Holland has
created an online tool to train and develop the knowledge
and skills of all technicians at New Holland dealerships.
This online tool enables the technicians to build on the
training received during workshops at New Holland’s Training
Centres and constantly update and develop their knowledge.
Service Plus – Long lasting confidence
Service Plus coverage from Covéa Fleet provides owners
of New Holland agricultural machinery with additional cover
on the expiry of the manufacturer’s contractual warranty.
Please ask your dealer for more details.
Subject to status and availability.
Terms and conditions apply.
We understand your business, we tailor your finance to your needs
CNH Capital, the financial services company of New Holland, has
thorough knowledge of the agricultural industry. Every customer is
unique, with specific equipment and financial needs. That’s why we
extend customer service to include tailor-made financial packages.
New Holland Dealers and CNH Capital specialists work together to
offer you the most advanced agricultural equipment coupled with a
flexible and innovative financing solution. With CNH Capital, you have
the peace of mind that comes from dealing with a financing company
that specialises in agriculture.
DIA
Dealer Installed Accessories
New Holland is a global brand,
but recognises that different local
conditions mean varying needs.
A comprehensive range of
approved accessories to optimise
machine performance in all
conditions can be supplied
and fitted by your dealer.
21
SPECIFICATIONS
Models
T6050
T6070
T6080
6 / T / 4v / Tier III
6 / T / 4v / Tier III
6 / T / 4v / Tier III
Engine
No. of cylinders / Aspiration / Valves / Emission level
Fuel system - High Pressure Common Rail
●
●
●
Approved Biodiesel blend
B100*
B100*
B100*
Capacity
(cm3) 6728
6728
6728
Bore and stroke
(mm) 104 x 132
104 x 132
104 x 133
103/140
114/155
Rated Power ISO TR14396-ECE R120
[kW/hp(CV)] 92/125
Rated Power ISO TR14396-ECE R120 Engine Power Management
[kW/hp(CV)] 110/149
117/159
123/167
Max. Power ISO TR14396-ECE R120
[kW/hp(CV)] 100/136
110/150
122/166
Max. Power ISO TR14396-ECE R120 Engine Power Management
[kW/hp(CV)] 117/159
124/169
131/178
Rated engine speed
(rpm) 2200
2200
2200
Max. Torque ISO TR14396
(Nm) 593@1400
643@1400
690@1400
Max. Torque ISO TR14396 Engine Power Management
(Nm) 620@1600
678@1600
690@1400
42 / 27
37 / 29
Torque rise standard / with Power Management
(%) 47 / 28
●
Viscous coupled cooling fan
●
●
Fuel tank capacity
(Litres) 300
300
300
Service interval
(hours) 600
600
600
●
●
Transmission
●
IntelliShift™ system
Range Command™ Semi PowerShift (40kph ECO or 50kph)
Number of gears / with creeper
(F x R) 19 x 6 / 29 x 12
19 x 6 / 29 x 12
19 x 6 / 29 x 12
2.52 / 0.42
2.380 / 0.397
●
●
19 x 6 / 29 x 12
19 x 6 / 29 x 12
1.98 / 0.33
1.871 / 0.31
●
●
●
4WD front axle
●
●
●
Terraglide™ front axle suspension
O
O
O
Supersteer™ front axle
O
O
O
55 / 55 / 65
55 / 55 / 65
Minimum speed / Minimum speed with Creeper**
(kph) 2.52 / 0.42
●
Auto transmission functions
Power Command™ Full PowerShift (40kph ECO or 50kph)
Minimum speed / Minimum speed with Creeper**
(F x R) 19 x 6 / 29 x 12
Speed range / with creeper
(kph) 1.98 / 0.33
Auto transmission functions
Front Axles
Steering angle Standard / Terraglide™ / SuperSteer™
(°) 55 / 55 / 65
Fast Steer™ system
O
O
O
Terralock™ traction management system
●
●
●
Dynamic (pivoting) front fenders
●
●
●
Hydraulics
●
●
●
113 / 210
113 / 210
●
●
●
Type Std / Deluxe / Electro Hyd. activation
DLX / EH
DLX / EH
DLX / EH
Standard no. rear valves
4
4
4
Joystick control
O
O
O
2/3
2/3
CCLS Closed Centre Load sensing
Main pump flow / Pump pressure
(Lpm / Bar) 113 / 210
Electronic Draft Control (EDC)
Remote valves
Mid mount valves
(No.) 2/3
Linkage
Max. lift capacity at ball ends with links horizontal
(kg) 8257
8257
8257
Continuous lift capacity through the range (610mm behind ball ends)
(kg) 6616
6616
6616
Front linkage lift capacity at ball ends
(kg) 3568
3568
3568
1969 / 1546 / 2120
1969 / 1546 / 2120
●/●
●/●
O / 2120
O / 2120
O
O
PTO
Engine speed at:
540 / 540E / 1000rpm
Auto PTO management / External activation
22
(rpm) 1969 / 1546 / 2120
●/●
Front PTO (1000rpm) / Engines speed
(rpm) O / 2120
Front PTO with Auto PTO Management
O
Models
T6050
T6070
T6080
Hydraulic trailer brakes
●
●
●
Optional pneumatic tractor brakes (standard with 50kph)
O
O
O
360° Horizon Cab
●
●
●
High top cab with opening visibility panel
●
●
●
Air suspension seat
●
●
●
Auto Comfort™ seat
O
O
O
Air conditioning
●
●
●
Automatic climate control
O
O
O
Air recirculation filters
●
●
●
Telescopic mirrors
●
●
●
Telescopic, remote adjusted, heated, mirrors
O
O
O
Comfort Ride™ cab suspension
●
●
●
Headland Turn Sequence
O
O
O
Performance monitor with ISO 11786 connector
O
O
O
IntelliView™ II colour monitor with ISO 11783 connector
O
O
O
IntelliView™ Plus II colour monitor with ISO 11783 connector *
O
O
O
dB(A) 71
71
72
O
O
O
O
O
O
5450
Brakes
Cab
Optimum cab noise level EC 77/311
2nd Rotary Beacon
Attachments
Loader ready from factory
Dimensions
Optimum turn radius Std and Terraglide™ front axle
(mm) 5450
5450
Optimum turn radius SuperSteer™ front axle
(mm) 4950
4950
4950
A Overall length inc. weight pack and rear linkage (all axle types)
(mm) 4824
4824
4824
B Minimum width
(mm) 2000
2000
2000
C Overall height**
(mm) 3090
3090
3090
D Wheelbase
Standard front axle
(mm) 2734
2734
2734
Terraglide™ suspended front axle
(mm) 2789
2789
2789
SuperSteer™ front axle
(mm) 2881
2881
2881
Front Min. / Max.
(mm) 1325 / 2285
1325 / 2285
1325 / 2285
Rear Min. / Max. (all axle types)
(mm) 1431 / 2173
1432 / 2173
1433 / 2173
(mm) 536
536
536
E Track width
F Ground clearance
Weights
Minimum unballasted / shipping weights
Standard front axle
(kg) 5400
5400
5600
Terraglide™ suspended front axle
(kg) 5700
5700
5900
SuperSteer™ front axle
(kg) 5680
5680
5880
Max. permissible weight with Class 3 Front Axle
(kg) 10000
10000
–
Max. permissible weight with Class 4 Front Axle
(kg) –
–
10500
● Standard
National restrictions apply
O Optional
– Not available
*Conditions apply
**All measurements are assumed using 20.8R38 rear tyres
C
F
E
B
D
A
23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising