CX-50 - Brochure
CX-50 Series
Compact X-ellence Station
• RED-tech technology reflectorless EDM
• Reflectorless up to 350 m
• Up to 15 hours battery life
• On-board software
• Red laser pointer
• Waterproof IP66
CX-50 Series
SPECIFICATIONS
Compact X-ellence Station
RED-tech Technology Reflectorless EDM
Model
CX-52
CX-55
30x / 2.5"
30x / 2.5"
Telescope
• Fast distance measurement of 0.9 s.
• Sokkia’s traditional pinpoint precision in reflectorless
distance measurement.
• Reflectorless operation from 30 cm to 350 m.
• Coaxial EDM beam and laser-pointer provide fast
and accurate aiming.
• Ensures accuracy even with reflective sheets.
Magnification / Resolving power
Length
171 mm
Objective aperture
45 mm (48 mm for EDM)
Image
Erect
Field of view
1°30' (26 m/1,000 m)
Minimum focus
1.3 m
Reticle illumination
5 brightness levels
Angle Measurement
Display Resolution
A
1" / 5" (0.0002 / 0.001gon, 0.005 / 0.02mil)
Accuracy (ISO 17123-3:2001)
IACS (Independent Angle Calibration System)
Dual-axis compensator / Collimation compensation
B
2"
5"
Provided
-
Working range: ±6' (±111 mgon)
Collimation compensation available
Distance Measurement
Laser output (Reflectorless mode)
A
C
Reflectorless
0.3 to 350 m
(under average conditions)
Reflective sheet
RS90N-K: 1.3 to 500 m
RS50N-K: 1.3 to 300 m
RS10N-K: 1.3 to 100 m
CP01: 1.3 to 2,500 m
OR1PA: 1.3 to 500 m
B
Mini prisms
One AP prism
Display resolution
C
Waterproof, Rugged, and Operator Friendly
• IP66 dustproof / waterproof rating.
•Rugged metal chassis and heavy duty handle.
• Standard usage temperature range -20° to 60°C.
Advanced Angle Measurement System
•The CX-50 series features Sokkia’s original absolute encoders
which provide long-term reliability in any job site condition.
The dual-axis compensator ensures stable measurements even
when setup on uneven terrain.
• Sokkia’s traditional motion clamp and tangent screw are
employed to ensure stable angle measurement.
• CX-52 features IACS (Independent Angle Calibration System)
technology for extremely reliable angle measurement.
Standard Accessories
• CX-50 series total station • Battery (BDC46C) • Battery charger (CDC68) • Power cable • Lens cap • Lens hood • Tool pouch • Screwdriver
SOKKIA CORPORATION
16900 W. 118th Terrace Olathe, KS 66061
(800) 4-SOKKIA
www.sokkia.com
Specifications subject to change without notice
©2015 Topcon Corporation All rights reserved.
SOK-1034 Rev A 11/15
• Lens brush
• Adjusting pin x2
• Cleaning cloth
• Operation manual
• Laser caution sign-board
• Carrying case
• Carrying strap
Class 3R / Prism / sheet mode: Class 1
Measuring range
Up to 5,000 m
Fine/Rapid: 0.001 m / 0.01 ft. / 1/8 in.
Tracking: 0.01 m / 0.1 ft. / 1/2 in.
Accuracy
Reflectorless
(3 + 2ppm x D) mm
(ISO 17123-4:2001)
(D=measuring distance in mm)
Reflective sheet
(3 + 2ppm x D) mm
AP/CP prism
(2 + 2ppm x D) mm
Fine: 0.9s (initial 1.7s)
Rapid: 0.7s (initial 1.4s)
Tracking: 0.3s (initial 1.4s)
Measuring time
Interface and Data management
Display / Keyboard
Graphic LCD, 192 x 80 dots, backlight,
contrast adjustment / alphanumeric keyboard /
25 keys with backlight
Control panel location
Both sides
Data storage (internal memory)
Approx. 5,000 points
Interface
Serial RS-232C
Single side
General
Laser-pointer
Levels
Coaxial red laser using EDM beam
Graphic
6’ (Inner Circle)
Circular level
10’ / 2 mm
Optical plummet
Laser plummet (optional)
Magnification: 3x
Minimum focus: 0.3 m from tribrach bottom
Red laser diode (635 nm ±10 nm)
Beam accuracy: ≤1.0 mm at 1.3 m
Class 2 laser product
Dust and water protection
IP66 (IEC 60529:2001)
Operating temperature
-20 to 60ºC
Size with handle (w x d x h mm)
191 x 181 x 348
Weight with battery and tribrach
Approx. 5.6 kg
191 x 174 x 348
Power supply
Battery (BDC46C)
Detachable battery
Li-ion rechargeable battery
Operating time (20ºC)
BDC46C
Approx. 15 hours
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising