PDF icon - Global Survey

PDF icon - Global Survey
Leica iCON build
Construction layout
solutions
intelligent
C On s t r u c t i o n
Leica Geosystems intelligent CONstruction.
Whether you construct buildings, roads, bridges or tunnels, you benefit from
intelligent CONstruction. Leica iCON is more than a new product line or software
package, it enables you to enhance your performance, and increase your
profitability through perfecting your construction workflow. Understanding construction demands outstanding solutions:
 Custom-built
 Complete
 Straightforward
 High performance
When it has to be right.
Illustrations, descriptions and technical data are not binding. All rights reserved.
Printed in Switzerland – Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2014.
820120en - 05.14 – galledia
Laser plummet:
Laser class 2 in accordance with
IEC 60825-1 resp. EN 60825-1
New
Leica iCON builder 60
Product information
Leica iCON robot 60
Product information
Leica iCON build
Custom-built Solutions for
Building Construction
Features
intelligent
C On s t r u c t i o n
Leica Geosystems intelligent CONstruction.
Whether you construct buildings, roads, bridges or tunnels, you benefit from
Leica Geosystems intelligent CONstruction.
Whether you construct buildings, roads, bridges or tunnels, you benefit from
intelligent CONstruction. Leica iCON is more than a new product line or software
package, it enables you to enhance your performance, and increase your
profitability through perfecting your construction workflow.
intelligent
C On s t r u c t i o n
intelligent CONstruction. Leica iCON is more than a new product line or software
package, it enables you to enhance your performance, and increase your
profitability through perfecting your construction workflow.
Understanding construction demands outstanding solutions:
Custom-built
Complete
Straightforward
High performance
Understanding construction demands outstanding solutions:
Custom-built
Complete
Straightforward
High performance
When it has to be right.
When it has to be right.
i nt e l l i g e n t C O ns t r uc t i o n
i nt e l l i g e n t C O ns t r uc t i o n
*I
y*
By
Setup Pilot – world’s first fully automatic
setup measurement method
Propert
Cube Search – boosts prism search to a
maximum
Target Snap – ignores other prisms, just
intelligent
C On s t r u c t i o n
*I
al *
llec
nte tu
By
*
y*
Protected
locks to yours
ATACK support for PaveSmart 3D
Propert
Electronic Guide Light (EGL)
steers rod-man to line of sight
Leica Geosystems intelligent CONstruction.
Whether you construct buildings, roads, bridges or tunnels, you benefit from
intelligent CONstruction. Leica iCON is more than a new product line or software
package, it enables you to enhance your performance, and increase your
profitability through perfecting your construction workflow.
Understanding construction demands outstanding solutions:
Custom-built
Complete
Straightforward
High performance
When it has to be right.
i nt e l l i g e n t C O ns t r uc t i o n
Leica iCON
CC55
Lightweight,
handy PDA
for easy and
efficient field
work.
Leica iCON robot 60 perfects one-person
construction layout and 3D machine
control.
Its high performance tracking, innovative lock
& find mechanisms and software that is
tailored per work step, make it the ideal
partner on site.
The powerful iCONstruct field software used as
remote control optimises the functionality.
Leica Builder
Intuitive, powerful
and scalable manual
total station series
for routine
construction tasks
on site.
Leica iCON
gps 60
Versatile
SmartAntenna
for multi-purpose
positioning
tasks.
llectu
nte
*I
Leica iCON
CC65/66
Rugged, mobile
tablet PC with
enhanced
connectivity and
functionality.
Leica iCON
builder 60
The intuitive user
interface paired
with the highest
quality manual
total station
perfects any job.
y*
Leica MPR122,
360° prism
Highly accurate
target, suitable
for machine
control.
CRP pole
Flip pole to get
best prism
position
Protected
By
intelligent
C On s t r u c t i o n
llectu
nte
*I
Automatic Target Recognition
(ATR) > 600m / 2.000 ft
intelligent
C On s t r u c t i o n
The Bluetooth® word mark and
logos are owned by Bluetooth
SIG, Inc. and any use of such
marks by Leica Geosystems AG is
under license. Other trademarks
and trade names are those of
their respective owners.
Protected
By
*
partner on site.
The powerful iCONstruct field software used as
remote control optimises the functionality.
llec
nte tu
Protected
USB memory
stick and
SD card
support
al *
Leica iCON
gps 60
Versatile
SmartAntenna
for multi-purpose
positioning
tasks.
Leica iCON robot 60
Product information
Leica iCON build
Custom-built solutions for
building construction
*
Leica iCON
CC55
Lightweight,
handy PDA
for easy and
efficient field
work.
New
Features
al *
tailored per work step, make it the ideal
Leica iCON
CC65/66
Rugged, mobile
tablet PC with
enhanced
connectivity and
functionality.
Illustrations, descriptions and technical data are not binding. All rights reserved.
Printed in Switzerland – Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2014.
817368en - 04.14 – galledia
y*
control.
Its high performance tracking, innovative lock
& find mechanisms and software that is
Long-range Bluetooth
communication >350 m / 1.100 ft
The Bluetooth® word mark and
logos are owned by Bluetooth
SIG, Inc. and any use of such
Search upAG
tois
marks byPower
Leica Geosystems
300 m
/ 1.000
ft
under license.
Other
trademarks
and trade names are those of
their respective owners.
Propert
Leica iCON robot 60 perfects one-person
construction layout and 3D machine
Leica Builder
Intuitive, powerful
and scalable manual
total station series
for routine
construction tasks
on site.
Propert
Leica iCON
builder 60
The intuitive user
interface paired
with the highest
quality manual
total station
perfects any job.
*
Leica MPR122,
360° prism
Highly accurate
target, suitable
for machine
control.
CRP pole
Flip pole to get
best prism
position
al *
The Bluetooth® word mark and
logos are owned by Bluetooth
SIG, Inc. and any use of such
marks by Leica Geosystems AG is
under license. Other trademarks
and trade names are those of
their respective owners.
The Bluetooth® word mark and
logos are owned by Bluetooth
SIG, Inc. and any use of such
marks by Leica Geosystems AG is
under license. Other trademarks
and trade names are those of
their respective owners.
Setup Pilot – world’s first fully automatic
setup measurement method
Cube Search – boosts prism search to a
maximum
Target Snap – ignores other prisms, just
locks to yours
ATACK support for PaveSmart 3D
Electronic Guide Light (EGL)
steers rod-man to line of sight
Extra lock mode for distances
< 30 m / 100 ft
Speaker for
sound
notification
PinPoint measurements to
any surface up to 1.000m /
3.280 ft
3.5” coloured touch screen with
ambient light sensor (ALS)
Button
illumination
iCONstruct software onboard
Illustrations, descriptions and technical data are not binding.
All rights reserved.
Printed in Switzerland – Copyright Leica Geosystems AG,
Heerbrugg, Switzerland, 2014.
793559en - 04.14 – galledia
Leica Geosystems AG
Heerbrugg, Switzerland
Leica iCON build Speaker for
Leica Builder
sound
Brochure
Brochure
notification
Measurements to any surface
up to 500m/1600ft
USB memory
stick and
SD card
support
USB memory
stick and
SD card
support
www.leica-geosystems.com
Extra lock mode for distances
< 30 m / 100 ft
With Leica iCON builder 60, construction
layout was never more professional.
The intuitive user interface paired with the
highest quality manual total station perfects
any job.
Long-range Bluetooth
communication >350 m / 1.100 ft
Power Search up to
300 m / 1.000 ft
Automatic Target Recognition
(ATR) > 600m / 2.000 ft
Industry leading layout software
Best-in-class measurement technology
High return on investment
Leica iCON robot 60
Product information
Best-in-class laser measure
with PinPoint technology
Ambient light sensor (ALS)
automatically controls
display/button illumination
PinPoint measurements to
any surface up to 1.000m /
3.280 ft
Speaker
for sound
notification
Long lasting Li-Ion batteries
3.5” coloured touch screen with
ambient light sensor (ALS)
Button
illumination
iCONstruct software onboard
Electronic Guide Light (EGL)
guides rod-man left/right to
correct alignment
3.5” coloured touch screen
iCONstruct software onboard
Illustrations, descriptions and technical data are not binding.
All rights reserved.
Printed in Switzerland – Copyright Leica Geosystems AG,
Heerbrugg, Switzerland, 2014.
793559en - 04.14 – galledia
Leica Geosystems AG
Heerbrugg, Switzerland
www.leica-geosystems.com
Leica iCON build
Brochure
Leica Builder
Brochure
Leica Geosystems AG
Heerbrugg, Switzerland
www.leica-geosystems.com
Leica iCON robot 60
Product information
Leica iCON builder 60
Product information
intelligent
C On s t r u c t i o n
Leica Geosystems AG
Heerbrugg, Switzerland
www.leica-geosystems.com
Leica Geosystems
Choose the best solution for your task
*
nn
nn
*I
llec
nte tu
*I
*I
Propert
y*
nn
nn
High-end manual total station
Bright colour touch screen
Guide Light (EGL) for quick self-alignment
DXF direct: no need for prior conversion
in the office
Select layout points from map or point list
Automatic switch from map to bulls-eye
view
500m/1640ft reflectorless
Approximately 25% more efficient than
tape and string layout
Pro tec ted
By
*
By
nn
nn
nn
nn
al *
al *
llec
nte tu
Pro tec ted
iCON builder 60
�High-end robotic total station
�Setup Pilot: one-button method for
automatic and secure setup
�Cube Search: boosts prism search to
keep you focused on the job
�Target Snap: ensures that robot locks
only to you
�Machine control ready
�ATACK support for Leica PaveSmart 3D
�1000m/3280ft reflectorless
�Approximately 50% more efficient than
mechanical total station layout
Rugged 7’’ tablet PC
y*
By
*
y*
Pro tec ted
iCON robot 60
iCON CC65/66 iCON CC55
Propert
al *
llec
nte tu
nn Easy-to-use iCON build
software has the same user
interface on all iCON devices
nn Ambient light sensor
automatically adjusts
illumination for best visibility of
screen and buttons
nn Set up total station and finish
jobs without the need for a
controller
Handy & bright screen
controller
iCON build field software
CRP pole
nn Innovative point & line layout and data capturing tool
nn Works with mechanical & robotic total stations as well
as GPS
nn Simple to get started and to perfect any layout job
nn Tailor-made for site workers and adapted to their work
flow
nn Flip pole to get best prism
position
nn 2 bubbles support flipping
nn Pre-set pole heights in iCON build
nn Tip is made of durable steel
nn Use plate for grade checks on
footings, soil or gravel
nn Additional scale for vertical layout
marking
nn Center punch tip available – fits
dimensioning system
nn Featuring:
nn Point Pilot & Sketch: most intuitive data entry system
nn 3D Viewer for clear data visualisation, enabling users to
layout points straight from 3D design
nn Telematics option connects office to the site: stay
online for design updates, as-builts or remote support
nn Auto-Layout next point from list or nearest point to you
iCON builder 60
delivery contents
nn All accessories included for
out-of-the-box use
nn Original Leica Geosystems
accessories for optimal working
conditions
iCON
robot 50
Leica
Builder
Your Trusted Active
Customer Care
nn Mid-range robotic
total station
without display
nn PowerSearch &
Automatic Aiming
for fast prism
search & lock
nn 250m/820ft
reflectorless
nn Mid-range
manual total
station with
monochrome
screen
nn High accuracy
nn Works with iCON
data loggers
Active Customer Care is a true
partnership between Leica
Geosystems and its customers.
Customer Care Packages (CCPs)
ensure optimally maintained
equipment, the most up-to-date
software and quality support to
deliver the best results for your
business. The myWorld @ Leica
Geosystems customer portal provides
a wealth of information 24/7.
B LU E
B LU E
B LU E
iCON gps 60
iCON build PLUS
nn
nn
nn
nn
Grow with your business into dirt works
nn Volumes app to give contractors exact info on
dirt movements in m3/ft3
nn Cut & Fill app for grade checks
nn Slopes app for batter board and slope staking
High performance smart antenna
Excellent signal tracking
Rover or base setup
High accuracy
MPR 122
nn
nn
nn
nn
Ultra rugged 360° prism
Suitable for machine control
Highest precision
Fits perfectly the CRP pole
B L U E PA C K
S I LV E R
S I LV E R
S I LV E R P A C K
GOLD
GOLD
G O L D PA C K
P L AT I N
P L AT I N
P L AT I N I U M P A C K
Understanding construction.
Propert
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising