Installing Your Multifunction to Your Network for the First Time

Installing Your Multifunction to Your Network for the First Time
<< Previous
Next >>
Installing Your Multifunction
to Your Network for the First Time
PIXMA MX512
Macintosh OS
1
<< Previous
Next >>
Installing Your Multifunction
to Your Network for the First Time
PIXMA MX512
Mac OS
Preparing to Connect My Multifunction to My Network
Network Requirements
Notes on Wireless Connection
Installing the Drivers
3
3
4
5
2
Preparing to Connect My Multifunction
To My Network
<< Previous
Next >>
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
3
Preparing to Connect My Multifunction
To My Network
<< Previous
Next >>
An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.
Notes on Network Connection
• The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
• In an office setup, consult your network administrator
• If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
• Place the machine and computer on the same network segment.
4
Installing the Drivers & Software
<< Previous
Next >>
Software Installation
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.
(The installation time varies depending on the computer environment or the number of application software to be installed.)
IMPORTANT
• Log on as the administrator (or a member of the Administrators group).
• Quit all running applications before installation.
• Do not switch users during the installation process.
• Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
• It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the
Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
• If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.
5
Installing the Drivers
<< Previous
Next >>
Installing the PIXMA MX512 on Your Wireless Network
If you are installing your printer on your network for the first time, a step-by-step walk through of the
wireless setup is built in to the installation routine of the software that shipped with your PIXMA.
Simply insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through
the easy to follow instructions. You’ll be printing wirelessly in no time. Be sure to select Wireless
Connection on the Connection Method Selection screen.
6
Installing the Drivers
<< Previous
Next >>
1. Insert the CD-ROM into the computer.
IMPORTANT
If the USB cable is already connected, unplug it. If a message appears on the computer, click Cancel.
2. Double-click the [Setup] icon in the CD-ROM folder, then click [Download] in the subsequent window.
7
Installing the Drivers
<< Previous
Next >>
REFERENCE
•When the CD-ROM folder does not open automatically,
double-click the CD-ROM icon displayed on the desktop.
•The screen below is displayed while downloading.
8
Installing the Drivers
<< Previous
Next >>
If you click [Cancel] while downloading, you will see the following screen.
- If you click [No], you will return to the screen displayed while downloading.
- If you click [Yes], the download is cancelled. In this case, the files under the download are deleted.
When the download fails, the screen below is displayed.
Click [OK], and you will go back to the screen for downloading in the procedure .
9
Installing the Drivers
<< Previous
Next >>
3. When the download is complete, the screen below is displayed. Click [Next].
REFERENCE
Select "Save a file for setting up the software again to the download folder after the installation is complete," and the
file will be saved to the download folder.
10
Installing the Drivers
<< Previous
Next >>
You can perform the setup later using this file.
4. In the subsequent screen, enter the administrator name and password. Then click [OK].
11
Installing the Drivers
5. Click Next
<< Previous
Next >>
7. Click Wireless Connection.
Follow any instructions and go to step 8.
6. Click Network Connection.
8. Click Other Methods
12
Installing the Drivers
9. Click Standard setup.
<< Previous
Next >>
10. Continue to follow any instructions until the screen below is
displayed. Network connection setting is complete.
Follow any instructions and go to step 10.
Click Next
13
Installing the Drivers
<< Previous
Next >>
Install the Software (Information)
1. Click Next.
Follow any on-screen instructions to proceed with
the software installation.
2. Click Add Printer.
REFERENCE
The alphanumeric characters after Canon xxx series is
the machine's Bonjour service name or MAC address.
If the machine is not detected, make sure of the
following.
- The machine is turned on.
- The firewall function of any security software is turned
off.
- The computer is connected to the access point.
REFERENCE
XXX: xxx refers to the model name you are using.
14
Installing the Drivers
<< Previous
Next >>
3. Select Canon xxx series Canon IJ Network and click Add.
CAUTION
If you will be installing the Canon printer driver on Mac OS X and using the printer through a network connection, you
can select [Bonjour] or [Canon IJ Network] in the [Add Printer] dialog.
If [Bonjour] is selected, remaining ink level messages may differ from those indicated by [Canon IJ Network].
Canon recommends you to use [Canon IJ Network] for printing.
15
Installing the Drivers
4. Click Next.
<< Previous
Next >>
5. Click Next.
Setup is complete
16
Installing the Drivers
<< Previous
Installing the PIXMA MX512 on Your Wireless Network
If you can’t find your CD-ROM, you may download the MX510 series Mini Master Setup, which includes the same step-by-step installation as the
CD-ROM, by following the instructions below:
1.
2.
3.
4.
5.
6.
Click here to access the MX512 Drivers & Software page.
Select the operating system and version of your computer (see example below).
Look under the ‘Drivers’ section.
Click on ‘MX510 series Mini Master Setup’ entry.
After reading the details and disclaimer,click ‘I Agree – Begin Download’ and save the file to your computer.
Once the download is complete, double-click the file from its download location to begin the installation.
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising