Panduit Pre-Configured Physical Infrastructure Cisco® Nexus 7009

Panduit Pre-Configured Physical Infrastructure Cisco® Nexus 7009
Panduit Pre-Configured Physical Infrastructure
Cisco® Nexus 7009 Switch
D ATA S H E E T
Overview
Panduit™ Net-Access™ Cabinets have been tested to ensure compatibility with
various deployments of the Nexus 7009 switch and deliver energy efficiencies
through shared thermal and cable management concepts. Panduit
Pre-Configured Physical Infrastructures support the deployment of Cisco®
Nexus 7009 Switch platforms with pre-assembled configurations that are
offered in versions that meet typical copper and fiber I/O module provisioning
schemes including:
• Base configuration does not include connectivity, allows
flexibility to mix and match copper and fiber media types
• “Medium Fiber” for switch provisions requiring up to (4) 32-port
fiber I/O Modules (connectivity from patch panel to switch)
• “Medium Copper” for switch provisions requiring up to (4) 48-port
copper I/O Modules (connectivity from patch panel to switch)
• “Heavy Copper” for switch provisions requiring up to (6) 48-port
copper I/O Modules (connectivity from patch panel to switch)
Key Features
Pre-engineered design with validated power, thermal, and space optimization for
the Cisco® Nexus 7009 Switch Platform
Cisco® Nexus 7010* Pre-Configured Solution
shown in a Net-Access™ N-Type Cabinet
(Connectivity is offered as an option.)
New Cisco Compatible Intake Ducting (co-engineered and validated with Cisco)
that optimizes cooling system efficiency by establishing front to back airflow
patterns
Solution Components
Specify and procure cabinet, cabling, cable and thermal management, and
grounding and bonding all with one part number
(1) 19" High capacity horizontal cable
manager, 4 RU
Ordering Information
(2) 19" High capacity horizontal cable
manager, 2 RU
CQ7009B
CQ7009F4
CQ7009C4
CQ7009C6
Pre-Configured Physical Infrastructure for 7009 Base with all
necessary cable management, grounding jumpers, and patch
panels pre-assembled together. Featuring a 32.0" W x 83.0" H x
48.0" D (812mm x 2108mm x 1219mm) 45 RU Net-Access™
N-Type Cabinet with full perforated front door, split perforated rear
doors, side panels, cable management fingers, and POU brackets.
Pre-Configured Physical Infrastructure for 7009 Medium Fiber
begins with the base configuration and adds enough copper and
fiber connectivity to deploy (4) 32-port fiber I/O modules.
Pre-Configured Physical Infrastructure for 7009 Medium
Copper begins with the base configuration and adds enough
copper and fiber connectivity to deploy (4) 48-port copper
I/O modules.
Pre-Configured Physical Infrastructure for 7009 Heavy Copper
begins with the base configuration and adds enough copper and
fiber connectivity to deploy (6) 48-port copper I/O modules.
*Cisco Nexus 7009 not included in the part numbers above. Always follow active equipment
manufacturer’s recommended installation practices. Panduit Pre-Configured Physical Infrastructures
are shipped on standard pallets. For applications that require shock-resistant packaging to facilitate
pre-mounting active equipment, please contact customer service.
(1) 19" Horizontal manager, D-rings, 1 RU
(12) 24-port QuickNet™ Angled Patch Panel
(2) QuickNet™ Patch Panel blank
(1) 24-port QuickNet™ Straight Patch Panel
(1) 1 RU Angled filler panel
(1) 2 RU Angled filler panel
(1) Cisco 7009 Panduit inlet duct
(Kit) Net-Access™ Vertical Blanking Panels
(1) Common bonding network jumper kit
(1) Equipment bonding jumper kit
(1) ESD port kit
(1) ESD wrist strap
(6) QuickNet™ Cassette Cable Manager
(2) Cool Boot® for cabinet top
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800.777.3300
©2014 Panduit Corp.
ALL RIGHTS RESERVED.
RKDS03--WW-ENG
7/2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising