Packaged Audio Products
PC-643S
PC-644S
BS-677B / 677BT
BS-677W / 677WT
F-160G / 160GM
F-160W / 160WM
F-240G / 240GM
F-240W / 240WM
PC-645R
PC-646R
PC-1864
PC-1867 / PC-1863
PC-2668
BS-1030B
BS-1030W
BS-330 / 330T
Packaged Audio Products
ef
www.toa.de
© TOA Electronics Europe GmbH
(0803) 833TEEC076
Specifications are subject to change without prior notice. Errors excepted.
Application Example 3
About TOA
Mosque / Club House etc.
18m
EM-400
Since it’s foundation in 1934 the TOA Corporation had a leading
effect upon the development of the acoustic and communication
technology. Among others TOA invented the Reflex Horn as well as
the Transistor Megaphone. Several patents and state of the art
products stand for an unequalled innovative company.
DM-1300
TZ-205 or BS-1030B
A-1121
TOA operates in more than 100 countries worldwide. This branch,
TOA Electronics Europe, is responsible for the sales and distribution
of TOA Products throughout mainland Europe, Middle East and
Africa.
TOA products range from amplifiers and speakers used in
foreground and background music systems, to mixers, wireless
microphone systems and digital processors used in sound
reinforcement, to intercom security systems.
This catalogue offers a selection of products from these ranges
- Public Address
- Professional Sound System
10m
• Background music inside.
• Separate outdoor sound (e.g. from minaret or paging during a
competition, etc.).
• Separate volume controls for indoor and outdoor.
for the design of small up to intermediate sized sound systems.
OFF
DM-1300
A-1061
EM-400
MIC 1
MIC 3
AUX 1
TZ-205
AUX 2
BASS
TREBLE
MASTER
POWER
10
8
6
ON
4
10
0
For further information for the design of intermediate to large
sound systems please contact your local dealer. Such systems are
built-up with the Venas and Smart Matrix systems components.
Dedicated to security applications the VX-2000 series fulfills the EN
60849 standard.
A basic demand in any kind of security application is a high grade
of intelligibility. And a good sound quality is an essential condition
for it.
MIC 2
10
0
PA AMPLIFIER
10
0
10
0
10
0
0
-10
OFF
2
+dB
0
-10
10
0
model A-1121
REC. OUT
A-1061
MIC 1
MIC 2
AUX. IN
MIC 3
AUX 1
AUX 2
BASS
TREBLE
MASTER
POWER
10
TC-630M
e.g. for Minaret
8
6
ON
4
0
10
PA AMPLIFIER
0
10
0
10
10
0
0
-10
10
0
OFF
2
+dB
0
-10
0
10
model A-1121
Church
20m
DM-1300
Sound quality and safety are part of our concept: safe & sound.
WM-4310
BS-1030W + WCB-12W or BS-1110 / BS-1120
A-1121 (120W)
Cassette / CD
15m
• Good sound quality.
• Clear and intelligible speech transmission
• Wireless microphones for free movement.
OFF
DM-1300
A-1121
OFF
DM-1300
MIC 1
MIC 2
MIC 3
AUX 1
AUX 2
BASS
30W
TREBLE
MASTER
30W
POWER
10
8
Smart Matrix SX-1000 Series
Venas VX-2000 Series
6
Venas VM-2000 Series
ON
4
10
0
PA
Lavaliere
Microphone
WM-4310
Cassette
/ CD
0
AMPLIFIER
10
0
10
0
10
0
10
-10
0
-10
0
2
+dB
0
OFF
8
10
model A-1121
BS-1030W
WT-4810
DIRECTORY
Application Examples: Supermarket / Factory
Microphones for Speech and Vocal :
Speech and Lecture: EM-400 / DM-1100 / DM-1200 / DM-1200D
Speech and Vocal: DM-1300
Microphones for Paging Use :
Hand-held Microphones: PM-222 / PM-120
Desk-top Microphones: PM-660 / PM-660D / EC-100M
Microphone Preamplifiers: RU-2001 / RU-2002
Sound Repeaters: EV-20R / PM-20EV
Mikrophone Stands :
Desk Stands: ST-65 / ST-66
Floor Stands: ST-301B / ST-302B
Package Amplifiers :
A-1000 Series: A-1031 / A-1061 / A-1121
A-1700 Series: A-1706 / A-1712 / A-1724
A-1800 Series: A-1803 / A-1806 / A-1812 / P-1812
Horn Speakers :
Drivers: TU-630 / TU-650 / TU-630M / TU-650M
Reflex Horns: TH-650 / TH-660
Horn Speakers: TC-615 / TC-615M / TC-630 / TC-630M
Paging Horn Speakers: SC-610 / SC-610M / SC-615 / SC-615M / SC-630 / SC-630M / SC-650
Wide Range Speakers :
For Indoor Use: PJ-100W / PJ-200W
For Outdoor Use: CS-64 / CS-154 / CS-304
Box and Column speaker :
Box speaker for Wall Mounting: BS-330 / BS-330T / BS-677B / BS-677BT / BS-677W / BS-677WT
Column Speaker: TZ-105 / TZ-205 / TZ-301
Universal Speaker: BS-1030B / BS-1030W / BS-1110W / BS-1120W
Accessories: WCB-12 / WCB-12W / SP-410 / SP-420 / TMB-1 / ST-16
High Quality Speaker :
Foregroundmusic: F-160G / -160GM / -160W / -160WM / -240G / -240GM / -240W / -240WM
Mounting brackets: WCB-12 / WCB-12W / WCB-24 / WCB-24W / CMB-31 / CMB-31W
Ceiling Speaker :
Flush-mount: PC-645R / PC-646R / PC-643S / PC-644S / PC-1863 / PC-1864 / PC-1867
Fire Dome Speakers: PC-1867F / PC-1867FC
Surface-mount Speaker: PC-2668
Wide-Dispersion Flush-mount Ceiling Speakers: F-122C / F-2322C / F-2352C / F-2852C
F-1522SC / F-2352SC / AC-120
Accessories: HY-AH1 / HY-BC1 / HY-TB1 / HY-TR1
AT-12UP / AT-50UP / AT-12UPR / AT-50UPR / YS-270 / ATT-311 / AT-063P / AT-303P / AT-603P
Impedance Meter : ZM-104
Mobile Amplifiers : CA-115 / CA-130 / CA-160 / CA-107 / CA-207 / CA-407
Wireless Systems :
UHF Band: WT-4810 / WT-4820 / WTU-4800 / WM-4210 / WM-4220 / WM-4310 /
WM-4310A / WM-4310H
Meeting Amplifier: WA-1822 / WA-1822C
VHF Band: WT-3810 / WTU-3800 / WM-3210 / WM-3220 / WM-3310 / WM-3310H
Megaphones : ER-510 / ER-510W / ER-510S / ER-1015 / ER-1015S / ER-2015 / ER-2015W / ER-604W
Mobile PA Systems :
Mixer: MX-628
2 Way SR Speaker: SL-122 / SL-152 / SL-222 / ST-32
Open Conference System : TS-700 / TS-701 / TS-702 / YR-700 / TK-708A / TK-712A / AR-71
Technical Column : Microphones / Speakers
Amplifiers
Application Examples : Office / Gymnasium /
Mosque / Club house / Church
4
5
5
6
6
7
7
8
8
9
10
11
12
12
13
14
15
15
16
16
17
17
18
18
19
20
20
21
22
22
23
23
24
25
25
26
27
28
29
30
32
33
34
35
Application Example 1
Supermarket
43m
AT-12UP
Office
PM-660
Ceiling Speaker
A-1121
Cashier
7m
20m
warehouse
Deposit Counter
7m
7m
• Backgroundmusic
• Announcements / paging from the office
• Volume Control for the office
A-1121
PM-660
MIC 1
MIC 2
MIC 3
AUX 1
AUX 2
BASS
TREBLE
MASTER
10
POWER
8
6.7k
1.7k
13k
3.3k
COM
6
10
0
PA AMPLIFIER
10
0
10
0
0
-10
10
0
-10
0
1.7k
13k
3.3k
3W
OFF
2
+dB
0
6.7k
COM
ON
4
10
0
10
3W
model A-1121
Ceiling Speaker x 18
CD
6.7k
1.7k
13k
3.3k
COM
1.5 W
Ceiling Speaker x 1 (Office)
Factory
35m
Ceiling Speaker
SC-615M
AT-12UP/AT-50UP
Canteen
EC-100M or PM-660D
Office
A-1812
*1) Meeting room
*1
25m
• Music distribution during recess
• Annnouncements with chime
• Selectable paging area
Outdoor area
CD
A-1812
Radio
MIC1
MIC2
MIC3
AUX1
10
0
10
0
10
0
10
0
10
0
MASTER
1
10
TREBLE
6.7k
1.7k
13k
3.3k
COM
2
BASS
SC-615M x 8 (Hall)
1,5W
Ceiling Speaker x 2 (Office)
1,5W
Ceiling speaker x 1
(Meeting Room)
1,5W
Ceiling speaker x 4
(Canteen)
10W
SC-615M x 3 (Outdoor)
Zone 1
AUX3
AUX2
ZONE 1
0
10W
3
ZONE 2
0
0
Paging from
PABX via
Telephone Input
10
0
10
10
ON
OFF
Zone 2
6.7k
1.7k
13k
3.3k
COM
6.7k
1.7k
13k
3.3k
COM
PM-660D
4
Microphones for Speech, Vocal Use
Speech Use
EM-400
Model
EM-400
Omnidirectional Microphone
Type
Electret Condenser Mic.
• Highly sensitive electret condenser microphone with
high sound quality and excellent acoustic effects.
• Low noise.
• Low power FET ensures long operational life of
the semipermanent mercury battery.
Directivity
Omnidirectional
Rated Impedance
2kΩ
Frequency Response
50~13,000Hz
Cable Length
5m with phone plug
Switch
Power ON/OFF switch
Power Source
Mercury battery (Malory H-C /LR44)
Standard Operating Voltage
1.3V
Continuous Operation
100 hours
Dimensions
Ø14 x 52mm
Weight
140g (with battery)
Accessory
1 battery, 1 holder clip
DM-1100
• Dynamic hand-heldmicrophone for general use
applications.
• Rigid diecast aluminum microphone body.
• Switching and handling noise suppression.
• Fitted with 7.5m phone plug cable.
• Microphone holder provided as standard
accessory.
7,5m
OFF
ON
Standard Dynamic Microphone
W5/16”
DM-1200 / DM-1200D
10m
ON
OFF
Microphone for Speech
W5/16”
Speech and Vocal
• Dynamic hand-heldmicrophone for speech use
applications.
• Rigid diecast zinc microphone body.
• Switching and handling noise suppression.
• DM-1200 : 10m XLR-phone plug cable supplied with
unit.
• DM-1200D: 5 m DIN-plug cable with remote control
function to activate amplifiers power or a chime for
PA systems.
• Microphone holder provided as standard
accessory.
• Balanced output for long distance connection.
DM-1300
10000
10m
OFF
Microphone for Speech / Vocal
W5/16”
Model
DM-1100
Type
Directivity
Rated Impedance
Frequency Response
Talk Switch
Dimensions
Weight
Standard Accessory
Dynamic microphone (Moving-coil
Cardioid
600 Ω unbalanced
100~12,000Hz
ON/OFF switch
Ø55 x 178mm
155g (with cable)
7,5m cable, phone plug
Mic Holder (W5/16”)
DM-1200
microphone)
Cardioid
600 Ω balanced
50~12,000Hz
ON/OFF switch
Ø 39.5 x 163mm
298g (without cable)
10m cable, phone plug
Mic Holder (W5/16”)
• Dynamic hand-heldmicrophone for vocal/ speech use
applications.
• Rigid diecast zinc microphone body.
• Switching and handling noise suppression.
• 10m XLR-phone plug cable supplied with unit.
• Microphone holder provided as standard
accessory.
• Balanced output for long distance connection.
DM-1200D
DM-1300
Cardioid
600 Ω balanced
50~12,000Hz
ON/OFF switch
Ø 39.5 x 163mm
298g (without cable)
5m cable, DIN plug
Mic Holder (W5/16”)
Cardioid
600 Ω balanced
70~15,000Hz
ON/OFF switch
Ø51 x 170mm
245g (without cable)
10m cable, phone plug
Mic Holder (W5/16”)
5
Microphones for paging use
Hand-held Microphones
PM-222
PM-120
Unidirectional Paging Microphone
Unidirectional Paging Microphone
44
38
157
145
46
max. 2m
•
•
•
•
33
LOCK
PUSH
ON
max. 2.5m
Cost effective paging microphone.
Hand-held type with push-to-talk switch with lock.
Coiled 1-core shielded cable, 2m long with phone plug.
Heavy duty metallic body.
Model
PM-222
Type
Directivity
Rated Impedance
Frequency Response
Cables
Talk Switch
Dimensions (W x H x D)
Finish
Weight
Microphone Hanger
Dynamic microphone (Moving-coil
Unidirectional
600Ω, unbalanced
100~10,000Hz
coiled, 1-core shielded cable
Push-to-talk switch with lock
44 x 145 x 38mm
ABS resin, Gray
200g
Standard Accessory
• General-use paging microphone with heavy-duty
metallic body. Effective in high ambient noise areas.
• Hand-held type with push-to-talk switch with lock.
• Coiled 1-core shielded cable, 2.5m long with phone plug.
PM-120
microphone)
250Ω, unbalanced
50~12,000Hz
46 x 157 x 33mm
Champagne gold (front,), Black (rear)
230g
Optional (model 2202)
Desk-Top Type Microphones
PM-660
PM-660D
EC-100M
Paging Microphone
with phone jack
Paging Microphone
with DIN-connector
Chime Microphone
31
215
215
3
Phone jack
(Unbalanced)
150
100
2.5m
5 pin DIN Connector
(Balanced)
100
150
Phone jack
(Unbalanced)
Phone jack
(Unbalanced)
2.5m
2m
• Large talk switch with locking lever.
• Fitted with 2.5m 1-core shielded
cable.
• Large talk switch with locking lever.
• Extra switch contact for remote control.
• Fitted with 2.5m 2-core shielded
cable and DIN plug.
• Built-in 4-tone electronic chime unit.
• 2 batteries (AA-type) required.
• 2m phone plug to phone plug cable
supplied with unit.
• 2 Push- Buttons.
Model
PM-660
PM-660D
EC-100M
Rated Impedance
(sensitivity 0dB=1V/pa)
600 Ω, unbalanced
-58dB
600 Ω, balanced
-58dB
Frequency Response
Talk Switch
Remote Control
100~10,000Hz
100~10,000Hz
Push-to-talk switch type (short-off circuit, with lock lever)
-Make contact
(interlocked with talk switch)
--Head; Zinc plated steel wire, baked painting, Gray/Body; ABS resin, Gray
100 x 215 x 150mm
100 x 215 x 150mm
440g
440g
600 Ω, unbalanced
Microphone: -53dB
Chime Signal: -45dBV
-Push ON - Push OFF
--
Power Requirements
Finish
Dimension (W x H x D)
Weight
6
DC 3V (AA-type battery x 2 pcs)
Metallic gold (Stand base)
112 x 313 x 150mm
770g
Amplifier Control Unit for Long Distance Connection
RU-2001
RU-2002
Amplifier Control Unit for microphones with DIN plug
(e.g. PM-660D, DM-1200D)
Amplifier Control Unit with Chime Signal for microphones with
DIN plug (e.g. PM-660D, DM-1200D)
124
124
10
MIC
CHIME
4 2 1 G
0
10
0
39.5
ON
0
39.5
MIC
ON
10
RU-2002
RU-2002
OUTPUT
H
C
DC IN
REMOTE
12/24V
DC IN
E
12V
OUTPUT
H
TOA Corporation
C
REMOTE
DC IN
12/24V
DC IN
E
12V
MADE IN JAPAN
TOA Corporation
Model
RU-2001
Power Requirements
Current Consumption
Mic. Input
Output
Signal
12-24V DC
60mA
-62dBV, 600 Ω, unbalanced
0dBV, 600 Ω, balanced
--
Dimensions (W x H x D)
Weight
Finish
124 x 39.5 x 159mm
700g
Steel color plate, Black
MADE IN JAPAN
RU-2002
DC IN
12/24V
DC IN
12V
4-tone/2-tone/Single tone chime or
gong sound (selectable)
Audio Signal (Twin Core Shielded)
A-1000
5 pin DIN Plug
MIC
Aux Input
CHIME
4 2 1 G
0
10
0
ON
MIC 1
MIC 3
MIC 2
AUX 1
AUX 2
BASS
TREBLE
MASTER
10
POWER
8
6
10
ON
4
Max Cable Length : 1km
Remote Microphone
PM-660D
10
0
RU-2002
PA
0
AMPLIFIER
10
0
10
0
10
0
10
-10
0
-10
0
OFF
2
+dB
0
10
model A-1121
Preamplifier
RU-2001/2002
(+optional Power Supply Unit)
Sound Repeater
Both sound repeaters are featuring digital circuitries. Easy recording of announcements, allowing the user to overwrite
mistakes until an announcement is perfect. Recording with CD-quality and maintenance-free use. An Automatic Gain
Control (AGC) is built-in to eliminate differences in recording levels. Punctuating announcements with chimes possible.
EV-20R
PM-20EV
Sound Repeater for recording and playback of
pre-recorded announcements
Microphone with Sound Repeater for Recording
and Playback
• For supermarkets and department stores with a distributed
speaker system.
• Up to 4 separate message selections or announcements
to a total maximum of three minutes may be recorded.
Front panel-mounted recording inputs (mic./line switchable).
• PC connection via USB. A CD Rom with various chimes is
included.
• Pre-recorded message can be transferred via USB-Interface.
• Built-in interval timer allows messages to be repeated
at various time intervals (0.5 seconds up to ∞).
• 3W/8Ω amplifier section built-in for direct speaker
connection. Volume control for level adjustment of an
external source.
• A line input and output for connecting various program
sources including CD players or dedicated BGM units.
• For locally recorded advertisements.
• A microphone is included as standard
equipment for recording and making
announcements.
• Built-in monitor speaker allows checking
announcements before broadcasting.
• Automatic chime for marking the start and
end of an announcement.
• PC connection via USB possible.
• A CD Rom with various chimes is included.
• Pre-recorded message can be transferred via
USB-Interface.
7
Model
EV-20R
PM-20EV
Power Requirements
24V DC / 400mA
or from AD-246 adaptor
10W
20...20 000 Hz ±3dB (1kHz)
Input / Recording Input:
Mic: -60dBV, 2.2kΩ, Line: -20dBV, 10kΩ
unbalanced phone jack
Line Input: 0dBV, 10kΩ, unbalanced screw terminals
Control Input 10mA terminal block type
Line: 0dBV, 600 Ω, unbalanced, terminal block connector
Headphone: 0dBV, 100Ω unbal. phone jack
Speaker: 3W, 8Ω, terminal block connector
Control: terminal block connector
Playback Intervals: ∞, 0s, 5s, 10s, 30s,
1 / 4 / 10 / 30 min or 1 h (selectable)
Delay: 0, 2 or 4 sec.
Recording time: max. 3min., max. 4 messages
210 x 44.2 x 180.2mm
730g
ABS resin, Black
CD-ROM, Unbalanced phone plug, USB cable,
terminal block connector (22-pole)
Optional: AD-246 Adaptor
24V DC / 200mA
or from AD-246 adaptor
5W
50...20 000 Hz ±3dB (1kHz)
Uniderectional gooseneck Microphone / external
Mic: -37dBV, 2.2kΩ, unbalanced, mini jack
Power consumption
Frequency Response
Input
Output
Messages
Dimensions (W x H x D)
Weight
Finish
Accessories
Line: 0dBV, 600 Ω, unbalanced, terminal block connector
Monitor speaker (built-in): 0,2W
Delay: 0, 2 or 4 sec.
Recording time: max. 3min., max. 1 message
122 x 44.2 x 180mm
710g
ABS resin, Black
CD-ROM, Unbalanced phone plug cord (2m),
USB cable, terminal block connector (7-pole)
Optional: AD-246 Adaptor
Microphone Stands
Desk Stands
Floor Stands
ST-65
ST-301B
Height 120 ~ 175 mm.
Clip type microphone
holder (W5/16” thread).
Height 101 - 172 cm.
With boom.
3/8” and 5/16” Adaptor.
ST-66
ST-302B
Height 220 - 347 mm.
Clip type microphone
holder (W5/16” thread).
Height 94 - 161 cm.
3/8” and 5/16” Adaptor.
• Microphone Connection
Microphone
Output Type/
Impedance
Unbalanced/
250Ω~2kΩ
Balanced/
600Ω
8
Amplifiers
Model
EM-400
DM-1100
DM-1200 (*1)
DM-1300 (*1)
PM-222
PM-120
PM-660
EC-100M
PM-660D
PM-660D
DM-1200 (*1)
DM-1300 (*1)
Supplied cable
Length
Connector
5m
Fixed <=> Phone
7.5 m
Fixed <=> Phone
10 m
XLR <=> Phone
10 m
XLR <=> Phone
2m
Fixed <=> Phone
2.5 m
Fixed <=> Phone
2.5 m
Fixed <=> Phone
2m
Phone <=> Phone
2.5 m
fixed <=> DIN
(*1) : DM-1200/DM-1300 has
balanced type output. Its
supplied cable is 1-core
shielded unbalanced type
Model
Input
A-1031/1061/1121
MIC 2,3
A-1706/1712/1724
MIC 1,2,3
Extensible Cable
Connector
Type
Phone
Unbalanced
Phone
Unbalanced
Distance
Cable type
Approx. 20 m
1-core shielded
Unbalanced
A-1503/1506/1512
MIC 1
A-1031/1061/1121 (AS)
MIC 1
A-1803/1806/1812 with
DIN
Unbalanced
XLR
(electrically)
DIN (D)
XLR (C)
Balanced
Approx. 80 m
Balanced
(transformer)
2-core shielded
Package Amplifiers
A-1000 Series
A-1031 (30W) / A-1061 (60W) / A-1121 (120W)
• Cost effective and durable mixer power amplifier.
• 3 Mic/2 Aux inputs, plus one recording output.
• Individual input volume controls plus master volume
control.
• Mic 1 Input with 5 pin DIN / phone plug.
• Voice-activated mic 1 takes precedence over other
inputs.
• Switchable phantom power.
• Speaker outputs 100V, 70V and 4Ω.
• Built-in current limiter and thermal protection circuit.
• AC mains or DC operation.
Typical Connection
AC Power
420
MIC 1
MIC 3
MIC 2
AUX 1
AUX 2
BASS
TREBLE
MASTER
10
POWER
ON
PA
AMPLIFIER
10
0
10
0
10
0
10
-10
0
-10
0
OFF
2
+dB
0
10
Cassette
Player
103
6
4
0
88.4
8
10
0
model A-1031
Horn Speaker
262
or Radio Tuner
Colummn
Speaker
1600
12 V DC Battery (A-1031, A-1061)
24 V DC Battery (A-1121)
Modell
A-1031
Power Requirement
Output
Power Consumption
Frequency Response
Distortion
Tone Control
S/N Ratio
Speaker Output
Recording Output
Input
220~240V AC (selectable) or 12V DC
30W rated, Max. 45W
120W at AC, 5A at DC
Protection Circuit
Muting Function
Finish
Dimensions (WxHxD)
Weight
5kg
A-1061
Cassette Recorder
Microphone (600½,
Remote
unbalanced)
Microphone
A-1121
220~240V AC (selectable) or 24V DC
220~240V AC / 24V DC
60W rated, Max. 90W
120W rated, Max. 180W
220W at AC, 9A at DC
380W at AC, 9A at DC
100~10,000Hz, ± 3dB
< 1% at 1 kHz, 1/3 rated power
Bass: 0 ~ -10dB at 100Hz, Treble: 0 ~ -10dB at 10kHz
Better than 92dB (all volume controls: ccw)
100V, 70V line, 4 Ω
0dBV, 600Ω, unbalanced, RCA Pin jack
Mic 1,2,3: -55dBV, 600Ω, unbalanced, phone jack
Aux 1,2 : -20dBV, 10k Ω, unbalanced, phone jack (AUX1), RCA Pin Jack (AUX2)
Current limiter, thermal protection, AC and DC fuse
MIC 1 overrides other input signals with 0~30dB attenuation
Panel; ABS resin, black/Case; Steel plate, black paint
420 x 103 x 262mm
7kg
10kg
9
Microphone Mixing Amplifiers A-1700 Series
A-1706 (60W) / A-1712 (120W) / A-1724 (240W)
• 6 / 4 Microphone and 3 / 5 AUX-Inputs offer
excellent flexibility.
• AUX 3 and AUX 4 are Stereo Inputs.
• Input 5 and 6: Switchable Mic or Line Level.
• An equalizer may be inserted before the power
amplification stage.
• For easy recording each A-1700 is equipped with
REC OUT connectors.
• 2 Speaker Zones can be accessed or All-call.
• Remote control of Volume.
• Remote Power-on.
220-230V
REMOTE
VOLUME
PA AMPLIFIER
model A-1706
OUTPUT RATED 60W
0.4A 50/60Hz
C
H
POWER
REMOTE
-
+
MIC6/AUX2
TOA Corporation
ENGINEERED IN JAPAN, ASSEMBLED IN CHINA
REC OUT
LINE OUT
AUX 5
AUX 4
AUX 3
MIC 6/AUX 2
MIC 5/AUX 1
OFF
SW1
MIC 6
ON
AUX 2
MIC 4
MIC5/AUX1
MIC 6
SW2
MIC 5
SW3
OFF
AUX 1
ON
MIC 3
MIC 5
PHANTOM
MIC 4 MIC 3
SW4
OFF
SW5
OFF
SW6
OFF
ON
ON
ON
MIC 2
MIC 2
MIC 1
SW7
OFF
SW8
OFF
ON
ON
MIC 1
TOTAL IMPEDANCE 167
C
C
DIRECT
100V
4â164
ZONE2
100V
ZONE1
100V
PWR AMP IN
SP OUT
OUTPUT
INPUT
Connection Exemple
420
Tape Recorder (REC OUT )
MIC 1
MIC 2
MIC 4
MIC 5/AUX 1
MIC 6/AUX 2
ZONE 1
MASTER
0 dB
-6
0
10
0
BASS
Speaker
MIC 3
10
0
10
0
TREBLE
10
0
AUX 3
10
0
AUX 4
10
-12
AUX 5
Equaliser
0
-
+
-
+
0
10
0
10
0
POWER
-18
ZONE 2
10
-24
ON
OFF
88.4
Horn
Speaker
107.7
Column Speaker
10
PA AMPLIFIER model A-1706
367
18.5
326.5
Cassette Player
CD (AUX 4 )
Microphones
Cassette Player (AUX 3)
* sensitivity selectable: Mic / Aux Level
Modell
Power Source
Rated Output
Distortion (THD)
Frequency Response
Tone Controls
Outputs Speaker
Recording Outputs
Line Outputs
Inputs
MIC 1 – 4
MIC 5 – 6*
AUX 3 – 4
AUX 5
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
10
A-1706
60W
9,3kg
A-1712
A-1724
220-240V AC 50/60Hz
120W
240W
Less than 2% at 1kHz
50 – 15,000Hz (3W output, AUX input)
Bass: ±10dB at 100Hz/Treble: ±10dB at 10kHz
High Impedance 100V Line: 83Ω, Low Impedance: 4Ω
0dBV, 600Ω, RCA jacks
0dBV, 600Ω, RCA jacks
–60dBV, 600Ω, electrically balanced, combination (XLR/Phone)
–60dBV, 600Ω, electrically balanced, combination (XLR/Phone)
–22dBV, 10kΩ, RCA pin jacks (stereo)
–22dBV, 10kΩ, combination (XLR/Phone) (monaural)
0°C – 40°C
Front Panel: ABS resin, Hearline black Case: Black steel plate
420 x 100 x 364mm
12,6kg
13,5kg
Mixer Power Amplifiers A-1800 Series
A-1803 (30W) / A-1806 (60W) / A-1812 (120W) / P-1812 (120W)
220-230V
REMOTE OUT
PA AMPLIFIER
model A-1806
OUTPUT RATED 60W
0.4A 50/60Hz
+
CONTROL
EMERGENCY
-
-
MOH OUT
TEL
G
EMERGENCY
H
600›
C
C
TEL PAGING
G
H
C
CHIME
BLANK
H
MOH
EMERGENCY
AUX 2
AUX 1
(MOH)
TEL
PAGING
MUTE BY TEL SIG
MUTE BY MIC 1 SIG
PHANTOM
SW6
MIC 3
SW7
MIC 2
SW8
MIC 1
CHIME
TOA Corporation
ENGINEERED IN JAPAN, ASSEMBLED IN CHINA
A-1803 / A-1806 / A-1812
REC OUT
LINE OUT
AUX 3
MIC 3
4 TONE
2 TONE
1 TONE
NONE
MIC 2
CHIME
SW2
OFF
ON
OFF
ON
SW3
OFF
OFF
ON
ON
P-1812 (Booster Amplifier)
MIC 1
TOTAL IMPEDANCE 167›
INPUT
-
+24V
C
C
DIRECT
100V
4‚164›
ZONE2
100V
ZONE1
100V
MIC 1
SELECTOR
1
2
SP OUT
220-230V
OUTPUT
REMOTE OUT
PA AMPLIFIER
model A-1806
OUTPUT RATED 60W
0.4A 50/60Hz
+
-
CONTROL
EMERGENCY
-
MOH OUT
TEL
G
INPUT
EMERGENCY
H
600›
C
C
TEL PAGING
H
G
CHIME
BLANK
H
C
MOH
EMERGENCY
AUX 2
AUX 1
(MOH)
TEL
PAGING
MUTE BY TEL SIG
MUTE BY MIC 1 SIG
PHANTOM
SW6
MIC 3
SW7
MIC 2
SW8
MIC 1
CHIME
TOA Corporation
ENGINEERED IN JAPAN, ASSEMBLED IN CHINA
REC OUT
LINE OUT
AUX 3
MIC 3
4 TONE
2 TONE
1 TONE
NONE
MIC 2
CHIME
SW2
OFF
ON
OFF
ON
SW3
OFF
OFF
ON
ON
MIC 1
TOTAL IMPEDANCE 167›
INPUT
-
+24V
C
C
DIRECT
100V
4‚164›
ZONE2
100V
ZONE1
100V
MIC 1
SELECTOR
1
2
SP OUT
MIC 1
MIC 2
MIC 3
OUTPUT
AUX 1
AUX 2
INPUT
AUX 3
ZONE 1
MASTER
EMERGENCY
0 dB
-6
0
10
0
BASS
10
0
10
0
10
0
10
0
10
-18
ZONE 2
420
-
+
-
POWER
-12
TREBLE
0
10
TEL
ON
OFF
-24
+
PA AMPLIFIER model A-1806
MIC 1
MIC 2
MIC 3
AUX 1
AUX 2
AUX 3
ZONE 1
MASTER
EMERGENCY
0 dB
-6
0
10
0
10
0
10
0
10
0
10
-18
ZONE 2
0
-
+
-
POWER
-12
TREBLE
10
TEL
-24
ON
OFF
88.4
10
BASS
107.7
0
+
PA AMPLIFIER model A-1806
367
18.5
326.5
• Matching the needs for a small PA-system with
emergency function, 2 speaker zones and all-call.
• 3 Microphone Inputs, 2 AUX-Inputs, Telephone- and
Priority Input.
• Emergency call even if the amplifier is switched off
• 3 Priorities: emergency, telephone or paging microphone
(MIC1) with priority overriding.
• All Call from telephone.
• Recording output.
• Speaker outputs with screw terminals.
• Selectable chimes.
• Connection of a 120W Booster Amplifier
P-1812 possible.
Connection Exemple
Cassette Player
Column Speaker
Speaker
CD
Horn
Speaker
*) Wireless
Receiver
Mics
Cassette Player
PBX
H
C
Speaker
TRUNK
BOX
Booster Amp
Paging Microphone PM-660
Connection of a
Telephone System
System Expansion
Model
Power Source
Rated Output
Distortion (THD)
Frequency Response
Tone Controls
Outputs
REC
LINE
Speaker Selection
Direct Out
MIC 1
MIC 2 - 3
AUX 1 (MOH)
AUX 2
AUX 3
TEL
EMERGENCY
LINE
Operating Temperature
Finish
Dimensions (W x H x D)
Weight
A-1803
30W
Inputs
8,1kg
A-1806
A-1812
220-240V AC 50/60Hz
60W
120W
Less than 2% at 1kHz
50 – 15,000Hz (3W output, AUX input)
Bass: ±10dB at 100Hz/Treble: ±10dB at 10kHz
0dBV, 600Ω, RCA jacks
0dBV, 600Ω, RCA jacks
2 zone, high impedance, individual selector SW, screw terminals
High impedance, screw terminals
Low impedance, 4Ω, screw terminals
–60dBV, 600Ω, combination (XLR/Phone), DIN (5P)
–60dBV, 600Ω, combination (XLR/Phone)
–20dBV, 10kΩ, RCA jacks
–20dBV, 10kΩ, RCA jacks
–20dBV, 10kΩ, combination (XLR/Phone)
–20dBV, 10kΩ, screw terminals
0dBV, 600Ω, screw terminals
0°C – 40°C
Front Panel: ABS resin, black Case: Black steel plate
420 x 100 x 364mm
9,4kg
12,6kg
P-1812
120W
50 – 20,000Hz (±3dB)
0dBV, 600Ω, RCA jacks
-
0/–10dBV, 10kΩ, RCA jacks
-10°C – 40°C
420 x 107.7 x 367mm
12,2kg
11
Horn Speakers IP-65
Driver Units
TU-630 (30W) / TU-650 (50W)
TU-630M (30W) / TU-650M (50W)
126
ø139
ø139
149
TU-630/650
Set the impedance selctor to the
desired impedance
LINE VOLTAGE
70V 100V
30W
OFF
15W 30W
8W 15W
5W 10W
3W 5W
TU-630M/650M
Set the impedance selctor to the
desired impedance
LINE VOLTAGE
70V 100V
50W
OFF
25W 50W
15W 30W
8W 15W
OFF
IMPED.
170
330
670
1k
2k
Impedance Selection
for TU-630M
IMPED.
100
200
330
670
Impedance Selection
for TU-650M
• Higly efficient horn drivers for reflex horns.
• Weatherproof (IP65) in combination with reflex horns TH-650 / TH-660.
• 2 input power versions: 30 or 50W.
• For high impedance (TU-630M / TU-650M) or low impedance applications (TU-630 / TU-650).
Model
TU-630
TU-650
TU-630M
TU-650M
Rated Input
Rated impedance
Tappings 100V
Frequency Response
SPL (1W, 1m)
Horn Coupling (INCH)
Dimensions
Weight
30W
16Ω
150 Hz ~ 6kHz
110dB
1-3/8"
ø 139 x 106mm
1.5kg
50W
16Ω
150 Hz ~ 6kHz
110dB
1-3/8"
ø 139 x 106mm
2.1kg
30W
30W / 15W /10W /5W
150 Hz ~ 6kHz
110dB
1-3/8"
ø 139 x 149mm
1.9kg
50W
50W /30W /15W
150 Hz ~ 6kHz
110dB
1-3/8"
ø 139 x 149mm
2.7kg
Reflex Horns
TH-650/ TH-660
TU-Series driver required (optional)
ø 600 (TH-660)
ø 500 (TH-650)
394 (TH-650)
425 (TH-660)
Model
TH-650
TH-660
Cut-off Frequency
Sound dispersion angle
Dimensions (mm)
without driver
Horn Coupling (INCH)
Weight
Number of Drivers to be
mounted
Applicable Drivers
200Hz
50° (2kHz)
ø 500 x 394
200Hz
70° (2kHz)
ø 600 x 425
1-3/8"
2.9kg
1
1-3/8"
3.6kg
1
TU-630/-630M/-650/-650M
TU-630/-630M/-650/-650M
12
• Rugged construction.
• Symmetrical sound dispersion.
• Durable powder coating on the surface of horns
ensures superb weatherproofing.
Horn Speakers (for general use)
IP-65
High input power handling for multiple application. Excellent for outdoor use. Durable construction. Long term
reliable operation. Screws and bolts of stainless steel.
TC-615 / 615M (15W)
ø 400
376
Horn Speaker with 250~7,000Hz frequency response and
120dB (1m) sound pressure level for paging and BGM.
TC-630 / 630M (30W)
ø 500
463
Horn Speaker with 200~6,000Hz frequency response and
125dB (1m) sound pressure level for paging and BGM.
Modell
TC-615
TC-615M
TC-630
TC-630M
Rated Power
Tappings 100V
15W
---
30W
---
Rated Impedance
Frequency Response
SPL (1W, 1m)
Dimensions
Weight
Other Features
8Ω
250Hz ~ 7kHz
108dB
ø 400 x 376mm
3kg
Weatherproof IP 65
15W
15W / 10W/
5W / 3W
--250Hz ~ 7kHz
108dB
ø 400 x 376mm
3.2kg
Weatherproof IP65
30W
30W / 15W/
10W / 5W
--200Hz ~ 6kHz
110dB
ø 500 x 463mm
4.5kg
Weatherproof IP65
16Ω
200Hz ~ 6kHz
110dB
ø 500 x 463mm
4.1kg
Weatherproof IP65
• Distribution pattern of horn speakers
300
200
• Typical Audible range
Speaker
Output
30W
100
500 m
(m)
50W
100
Distance
75 dB
70 dB
65 dB
75 dB
70 dB
65 dB
316 m
562 m
1000 m
398 m
708 m
1259 m
* 65 dB (Suburb Area)
70 dB (Town Area)
75 dB (Inner City)
200
300
SPL
The above pattern is shown under ideal environment.
(m) Air temperature and wind effect the pattern greatly
30W
50W
13
Paging Horn Speakers
IP-65
Designed compact for easy handling. Stainless steel anti corrosion bracket is equipped. Color: Off-white.
SC-610 / 610M (10W)
SC-615 / 615M (15W)
222
188
234
179
161
172
max.120dB SPL (1m).
max.124dB SPL (1m).
SC-630 / 630M (30W)
SC-650 (50W)
285
277
327
227
297.5
430
max.128dB SPL (1m).
max.126dB SPL (1m).
Can be mounted on Cars and Trucks for
mobile use.
Model
SC-610
SC-610M
SC-615
SC-615M
Rated Input
Tappings 100V
Tappings 70V
Low Impedance
Frequency Range
SPL (1W, 1m)
Dimensions (WxHxD)
Weight
10W
----8Ω
315 – 12 500Hz
110dB
172x161x188mm
1kg
10W
10 / 5 / 3 / 1W
10 / 5 / 2.5 / 1.5 / 0.5W
--315 – 12 500Hz
110dB
172 x 161 x 188mm
1.2kg
15W
----8Ω
280 - 10 000Hz
112dB
222 x 179 x 234mm
1.1kg
15W
15 / 10 / 5 / 3W
15 / 7.5 / 5 / 2.5 / 1.5W
--280 - 10 000Hz
112dB
222 x 179 x 234mm
1.3kg
Model
SC-630
SC-630M
SC-650
Rated Input
Tappings 100V
Tappings70V
Low Impedance
Frequency Response
SPL (1W, 1m)
Dimensions (WxHxD)
Weight
30W
----8Ω
250 – 10 000Hz
113dB
285x227x277mm
1.7kg
30W
30 / 15 / 7,5 / 5W
30 / 15 / 7.5 / 5 / 2.5W
--250 – 10 000Hz
113dB
285 x 227 x 277mm
2kg
50W (mobile use: 30W)
----16Ω
250 – 6 000Hz
109dB
430 x 297,5 x 327mm
3.4kg
Typical Connection of Low Impedance and High Impedance Speakers
TC-630
SC-630
A-1061 (60W)
TC-615M
A-1061 (60W)
or
8Ω
A-1806 (60W)
4Ω
Output
Impedance
or
8Ω
14
SC-630
8Ω
TC-615M
670Ω
!
8Ω
TC-630
TC-615M
A-1806 (60W)
100V,
High
Output
Impedance
or
SC-615M
or
SC-615M
or
SC-615M
Projection Speakers
For Indoor Use
PJ-100W (10W)
PJ-200W (20W)
ø180
195
250
165
130
ø140
160
200
108
135
SPL up to 102dB (1m)
SPL up to 108dB (1m)
Wide range Speaker for announcements and music, easy to mount.
For Outdoor Use
Weatherproof polyurethane resin paint and impact-proof leightweight ABS resin enclosure, and the stainless steel
brackets enable many years of outdoor use. Constant directivity coverage (90 degree in horizontal) for CS-154 and
CS- 304.
CS-64 (6W)
233
208
∅ 168
224
∅ 172
SPL up to 104dB (1m).
CS-154 (15W) / CS-304 (30W)
366
272
230
IP-65, 90° horizontal constant directivity
coverage. SPL up to 109dB (1m, CS154) resp. up to 113dB (1m, CS-304).
Model
PJ-100W
PJ-200W
Dyn. Cone Driver
Rated Input
Tappings 100V
Frequency Response
SPL (1W, 1m)
Dimensions
Weight
12cm
10W
10W / 5W / 2,5W / 1.25W
65Hz ~ 15kHz
92dB
ø 140 x 195mm
1,8kg
16cm
20W
20W / 10W / 5W / 2,5W
50Hz ~ 20kHz
95dB
ø 180 x 250mm
2,5kg
Model
CS-64
CS-154
CS-304
Dyn. Cone Driver
Rated Input
Tappings 100V
Frequency Response
SPL (1W, 1m)
Dimensions (W x H x D)
Weight
12cm
6W
6W / 3W / 1W
130Hz ~ 13kHz
96dB
233 x 224 x 208mm
1.5kg
12cm
15W
15W / 10W / 5W
150 Hz ~ 15kHz
97dB
366 x 230 x 272mm
2.8kg
12cm
30W
30W / 20W / 10W
120Hz ~ 15kHz
98dB
366 x 230 x 272mm
3.1kg
15
Box and Column Speakers
Wall-Mounting Box Speakers
BS-330 (3W)
173
BS-330T (3W)
173
101
195
195
101
81
81
Wall-mounting box speaker with 12cm
cone speaker for BGM / paging. ABS
resin enclosure.
BS-677B / 677W (6W)
Wall-mounting box speaker with
12cm cone speaker and attenuator
for BGM / paging. ABS resin enclosure
BS-677BT / 677WT (6W)
100
200
100
200
250
10
250
10
Wall-mounting box speaker with 12cm cone speaker for BGM / paging.
Wooden enclosure with cloth grille. The T-models are equipped with attenuator.
The “W”-type models are white and the “B”-type models are black.
Column Speakers
Metal Case Type
Splashproof for outdoor use under roof eaves.
Enclosure silver and black front grille.
TZ-301 (30W)
141
84
167
TZ-205 (20W)
84
141
TZ-105 (10W)
Column Speaker Directivity
141
1256
167
84
334
580
167
IP x4
Model
BS-330
BS-330T
BS-677B / 677W
BS-677BT / 677WT
Dyn. Cone Driver
Rated Input
Tappings 100V
Frequency Response
SPL (1W, 1m)
Dimensions (W x H x D)
Weight
Attenuator
12cm
3W
3W / 1W
120Hz ~ 15kHz
91dB
173 x 195 x 101mm
790g
–
12cm
3W
3W / 1W
120Hz ~ 15kHz
91dB
173 x 195 x 101mm
790g
OFF, -12 / -6 / 0 dB
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~ 10kHz
91dB
190 x 250 x 100mm
1.4kg
–
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~ 10kHz
91dB
200 x 250 x 100mm
1.41kg
OFF, -12 / -6 / 0 dB
Model
TZ-105
TZ-205
TZ-301
Dyn. Cone Driver
Rated Input
Tappings 100V
Frequency Response
SPL (1W, 1m)
Dimensions (W x H x D)
Weight
2x 12cm
10W
10W / 5W
150Hz ~ 10kHz
90dB
167 x 335 x 141mm
3.4kg
4x 12cm
20W
20W / 10W
150Hz ~ 10kHz
93dB
167 x 580 x 141mm
5.1kg
6x : 12.7x17.8cm
30W
30W / 15W
160Hz ~ 10kHz
100dB
167 x 1256 x 141mm
12.9kg
16
Speaker for General Use
BS-1030B / 1030W (30W) IPx4
290
• Aesthetically pleasing design blends in
modern buildings and other facilities, such as
boutique, restaurant and amusement park.
• Cost-effective high power PA box speaker.
• 2-Way bass reflex speaker.
• Low impedance (8Ω) or high impedance (100V)
selectable by rotary switch.
• Splash proof according to IPx4.
• Expanded installation options. Can be mounted
horizontally or vertically: flush-mount wall/
ceiling, with or without mounting bracket on
the wall.
• Equipped with U-bracket. Optional wall and
ceiling mounting brackets.
196
150
Model
BS-1030B
Enclosure
Rated Input
Impedance
Tappings 100V
Sensitivity
Frequency Response
Speaker Systems
Ambient Temperature
Grade of Protection
Finish
Dimensions(WxHxD)
Weight
Bassreflex
Bassreflex
30W
30W
8 Ohm
8 Ohm
30W / 20W / 15W / 10W / 5W
30W / 20W / 15W / 10W / 5W
90dB (1W/1m)
90dB (1W/1m)
80Hz - 20000Hz
80Hz - 20000Hz
12cm dynamic cone speaker, 2,5cm balanced dome tweeter
-10°C ... +50°C
-10°C ... +50°C
IP-x4
IP-x4
black
white
196 x 290 x 150 mm
196 x 290 x 150 mm
2.5kg
2.5kg
BS-1030W
BS-1110W (10W) / BS-1120W (20W)
Model
BS-1110W
BS-1120W
Rated Input
Impedanz
Tappings 100V
Sensitivity
Frequency response
Speaker
Ambient Temperature
Finish
Dimensions(W x H x D)
Weight
Optional Mounting bracket
10W
4 Ohm
10W / 5W
90dB (1W/1m)
150Hz - 14000Hz
2 x 12cm
-10°C ... +50°C
white
180 x 360 x 100 mm
2.9kg
YS-301,SP-410, WCB-12W
TMB-1W, Stand: ST-16
20W
8 Ohm
20W / 10W
93dB (1W/1m)
150Hz - 20000Hz
4 x 12cm +2.5cm Tweeter
-10°C ... +50°C
white
180 x 720 x 106 mm
5.1kg
YS-301
• For religious facilities, lecture rooms and school auditoriums.
• BS-1110W with 2 x 12cm Cone Speaker and BS-1120W with
4x 12cm Cone speaker and dome tweeter.
• Wide horizontal and narrow vertical dispersion angle.
• Low impedance (4Ω/ 8Ω) or high impedance (100V).
• Vertical array possible.
• Mounting horizontally or vertically. Optional wall
mounting brackets.
Optional Accessories
SP-410
SP-420
WCB-12 / WCB-12W
TMB-1
ST-16
Adjustable wall/
ceiling mount bracket
Colour: Silver
Flush Mounting
bracket for BS-1030
Wall-/ceiling Bracket
Length: 177,5mm
Max. Load: 3.5kg
Colour: WCB-12: black,
WCB-12W: white
(not to be used with BS-1120)
Table Mounting
bracket
(not to be used with
BS-1120)
Stand
17
High quality Sound Speakers
FGM Speakers
F-160G / 160GM
F-160W / 160WM
2-Way Bass Reflex Speaker
• Highly efficient,wide-range 2-way bass-reflex
loudspeaker system.
• 13 cm cone woofer with 90 mm magnet and
3 cm film diaphragm dome tweeter
with 70 mm magnet.
• Constant directivity 90º horizontal by 90º
vertical dispersion tweeter horn.
• Built-in separate overload protection
circuitry for woofer and tweeter (F-160G/
F-160W).
• Optional wall and ceiling mounting brackets
• Available in dark gray (F-160G/F-160GM) or
white (F-160W/F-160WM).
157
250
169
F-240G / 240GM
F-240W / 240WM
355
210
2-Way Bass Reflex Speaker
226
• Highly efficient,wide-range 2-way bass-reflex
loudspeaker system.
• 16 cm cone woofer with 90 mm magnet
and 3 cm titanium diaphragm dome
tweeter with 70 mm magnet.
• Constant directivity 90º horizontal by 90º
vertical dispersion tweeter horn.
• Built-in separate overload protection
circuitry for woofer and tweeter (F-240G/
F-240W).
• Optional wall and ceiling mounting brackets
• Available in gray (F-240G/F-240GM) or white
(F-240W/F-240WM)
Optional Accessories
Low Impedance Speakers
Model
F-160G / F-160W
F-240G / F-240W
System
Rated Input
Impedanz
Frequency Response
Cross-Over Frequency
SPL (1W, 1m)
Dimensions(WxHxD)
Weight
2-Way
150W
8Ω
100Hz ~ 20kHz
4kHz
91dB
250 x 157 x 169 mm
3.3kg
2-Way
150W
8Ω
65Hz ~ 20kHz
4kHz
92dB
355 x 210 x 226mm
4.1kg
Model
F-160GM / F-160WM
F-240GM / F-240WM
System
Rated Input
Tappings 100V
Frequency Response
Cross-Over Frequency
SPL (1W, 1m)
Dimensions(WxHxD)
Weight
2-Way
30W
30W / 20W / 10W / 5W
100Hz ~ 20kHz
4kHz
91dB
250 x 157 x 169mm
3.9kg
2-Way
30W
30W / 20W / 10W / 5W
65Hz ~ 20kHz
4kHz
92dB
355 x 210 x 226mm
5.5kg
Mounting bracket
WCB-12 / WCB-12W
Wall/Ceiling Bracket
• For F-160 Series
• Length 177,5mm
• Max. Load 3,5kg
• WCB-12: black
WCB-12W: white
High Impedance Speakers
ST-16
Floor Stand
• Height 1130...1660mm
• Max. Load 6kg
• Colour: silver
18
WCB-24 / WCB-24W
Wall/Ceiling Bracket
• For F-240 Series
• Length 333,5mm
(271+62,5mm)
• Max. Load 20kg
• WCB-24: black
WCB-24W: white
CMB-31 / CMB-31W
Wall/Ceiling Bracket
• For F-240 Series
• Length 141mm
(80 +61mm)
• Max. Load 8kg
• CMB-31: black
CMB-31W: white
Ceiling speakers
Flush Mount Speakers
COM
ø150
PC-644S (6W)
1.7k
PC-643S (6W)
3.3k
• 12 cm Speaker
• Screw-in Installation
• ABS resin baffle with aluminium net
grille, off-white
13k
• 12 cm Speaker
• Screw-in Installation
• ABS resine grille
6.7k
PC-646R (6W)
191
PC-645R (6W)
Ceiling
85
200
ø143
• 12 cm Speaker
• Screw-in Installation
• ABS resin baffle with aluminium net
grille, off-white
Ceiling
• 12 cm Speaker
• Screw-in Installation
• ABS resine grille, off-white
85
PC-1864 (6W)
Plastic grille with metal
punched net
Plastic grille and baffle
PC-1867 (6W)
Ceiling
PC-1863 (6W)
ø150
•
•
•
•
•
Metal grille and baffle
ø180
12 cm Speaker.
Fast & easy installation with spring catches.
Push-in connectors for speaker cables.
In-/Out bridge connection.
Off-white (RAL 9010)
121
Model
PC-645R
PC-646R
PC-643S
PC-644S
Dyn. Cone Driver
Rated Input
Tappings 100V
Frequency Response
SPL (1W, 1m)
Baffle
Depth
Ceiling hole ø
Weight
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~ 12kHz
90dB
ø 191mm
74mm
150mm
650g
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~12kHz
90dB
ø 191mm
74mm
150mm
650g
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~12kHz
90dB
200 x 200mm
74mm
143mm
700g
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~12kHz
90dB
200 x 200mm
74mm
143mm
720g
Model
PC-1863
PC-1864
PC-1867
Dyn. Cone Driver
Rated Input
Tappings 100V
Frequency Response
SPL (1W, 1m)
Baffle
Depth
Ceiling hole ø
Weight
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~16kHz
90dB
ø 180mm
110mm
150mm
650g
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~16kHz
90dB
ø 180mm
110mm
150mm
655g
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~16kHz
90dB
ø 180mm
110mm
150mm
650g
19
Fire Dome Speakers
Surface-mount Speaker
PC-1867F / PC-1867FC (6W)
PC-2668 (6W)
5
ø156 ±3
110
63-91mm
116
ø180
Decke
Die Einbaudose eignet sich
für Ausschnitte von 63-91mm
92.5
ø260
• Metallic firedome construction prevents flame and smoke
from spreading into ceiling installation.
• 12 cm Speaker.
• Easy installation with spring catches.
• Push-in terminals for speaker cable (PC-1867F).
• Ceramic-terminals (PC-1867FC).
• Aluminium baffle.
• PC-1867FC in accordance with British Standard BS5839
(Part 8).
•
•
•
•
•
•
12 cm Speaker.
Easy installation with spring catches.
Push-in terminals for speaker cable.
In-/Out bridge connection.
ABS Resin baffle.
Mounting bracket for back box included.
Model
PC-1867F
Model
PC-2668
Dyn. Cone Driver
Rated Input
Tappings 100V
Frequency Response
SPL (1W, 1m)
Baffle
Ceiling hole
Weight
12cm
6W
6W / 3W / 1.5W
100Hz ~16kHz
90dB
ø 180mm
ø 156
1.3kg
Dyn. Cone Driver
Rated Input
Tappings 100V
Frequency Response
SPL (1W, 1m)
Baffle
Dimensions
Weight
12cm
6W
6W / 3W / 1.5W / 0.8W
100Hz ~16kHz
90dB
260mm
ø 260 x 92.5mm
650g
• Setup Guide for Speakers
Building Type
Office
Hospital
School
Supermarket
Shopping Mall
Gymnasium
Ceiling type
flat
flat
flat
flat
flat
non-flat
Recommended Speaker
BS-330
PC-645R
PC-644S
PJ-100
PC-646R
PC-1864
PJ-200
PC-643S
PC-2668
BS-677
• Calculation for Amplifier and Speaker Power
Amplifier
Model
Amplifier
Speaker
Output
Total Input
Total Quantity of Speaker
1W
3W
6W
A-1031/A-1803
30W
30W
30
10
5
A-1061/ A-1706/ A-1806
60W
60W
60
20
10
A-1121/ A-1712/ A-1812
120W
120W
120
40
20
A-1724
240W
240W
240
80
40
12 m
• Typical ceiling speaker arrangement
18 m
20
Situation
: Office 18m x 12 m with 3m Ceiling height
Purpose
: Paging, BGM
Solution
: Speaker with 6m balance
Please refer to page 32 Technical Column
TZ-105
Church/Mosque
non-flat
F-160GM/WM
TZ-205
F-240GM/WM
TZ-301
BS-1110 / 1120
Wide-Dispersion Flush-mount Speakers
Expanded listening coverage area through extra-wide dispersion characteristics. Easy installation. Various models and
and accessories meet a wide variety of requirements. All materials are fire resistant in accordance with UL-94 V0.
The back-can additionally prevents fire and smoke into the ceiling.
F-2852C (60W)
F-122C (30W)
F-2352C (30W)
2-Way HiFi Speaker for high power
applications e.g. for high ceilings
(3...6m)
• 16 cm speaker.
• Diffusor for wide dispersion of high
frequencies.
• Metal back can.
Equalizing Controlled Type Full Range
Speaker. Cost effective if many speakers are installed. For medium ceiling
height (2...4m).
• Heat-Resistant back can.
• Optimized for use with AC-120
Controller. Ideal for use with
additional subwoofers.
• Diffusor for wide dispersion of high
frequencies.
2-Way HiFi Speaker for medium ceiling height (2...4m).
• 12 cm speaker.
• Diffusor for wide dispersion of high
frequencies.
• Metal back can.
F-2322C (30W)
Full range speaker according to UL- 94 V0
For medium ceiling heigt (2...4m).
• 12 cm speaker.
• Metal back can.
• Flat grille.
Model
F-2852C
Rated Input
Continuous Program
Impedance
Tappings 100V
Frequency Response
SPL (1W, 1m)
Finish
Mounting hole
Dimensions
Weight
60W
30W
30W
30W
180W (8Ω)
120W (8Ω)
120W (8Ω)
120W (8Ω)
100V / 70V / 25V // 16Ω / 8Ω
100V / 70V / 25V // 16Ω / 8Ω
100V / 70V / 25V // 16Ω / 8Ω
100V / 70V / 25V // 16Ω / 8Ω
60W / 30W / 15W / 3W
30W / 15W / 5W / 1.5W / 0.8W
30W / 15W / 5W / 1.5W / 0.8W
30W / 15W / 5W / 1.5W / 0.8W
80Hz ~ 20kHz
80Hz ~ 20kHz
80Hz ~ 20kHz
80Hz ~ 20kHz
91dB
90dB
90dB
90dB
Enclosure, Punched net: Steel Plate, Baffle Rim: Fire-resistant ABS Resin (UL-94 V0), White paint (rim and punched net)
ø 250mm
ø 200mm
ø 200mm
ø 200mm
ø 280 x 227 (D) mm
ø 230 x 200 (D) mm
ø 230 x 229 (D) mm
ø 230 x 229 (D) mm
5.1kg*
3.7kg*
3.7kg*
3.7kg*
F-2322C
F-2352C
F-122C
* incl. mounting accessories
Sound Dispersion of Conventional Speakers
Wide-Dispersion Speaker
21
Wide-Dispersion Flush Mount Speakers
F-1522SC (6W)
F-2352SC (6W)
Cost-effective compact model for low power
applications and medium ceiling height (2...4m).
• Only 117mm mounting depth.
• Flat front panel.
• 10 cm full range speaker.
2-way wide range speaker with diffusor for low power applications
and medium ceiling height (2...4m).
• 12 cm cone woofer and dome tweeter.
• Easy installation.
• Diffusor for wide dispersion of high frequencies.
• For use in ceilings having minimal depth.
Model
F-1522SC
Rated Input
Continuous Program
Impedance
Tappings 100V
Frequency Response
SPL (1W, 1m)
Finish
6W
6W
18W (8Ω)
18W (8Ω)
100V / 70V / 25V // 16Ω / 8Ω
100V / 70V / 25V // 16Ω / 8Ω
6W / 3W / 1W / 0.5W
6W / 3W / 1W / 0.5W
80Hz ~ 20kHz
80Hz ~ 20kHz
88dB
89dB
Punched net: Steel Plate, Baffle Rim: Fire-resistant ABS Resin (UL-94 V0),
White paint (rim and punched net), Dust proof bag: artifical fiber, black
ø 135mm
ø 200mm
ø 155 x 117 (D) mm
ø 230 x 154 (D) mm
1kg
1.5kg
Mounting hole
Dimensions
Weight
F-2352C
AC-120
Equalizing Speaker Controller
• For the use with the F-122C.
• The electronic controller’s equalizing and filter circuitry
provide optimal balancing characteristics.
• Two channels can be controlled plus one low output for
an additional subwoofer system (e.g. FB-100 or HB-1).
Model
AC-120
Inputs
Outputs
(electronic bal.) 2x +4dBm (max.+20dBm)
(electronic bal.) 2x +4dBm (max.+20dBm),
1x +4dBm (max.+20dBm) low out
20Hz ~ 20kHz
< 0,05%
< 94dB
482.6 x 44 x 297.5mm
230V, 50/ 60Hz
9VA
3.7kg
Frequency Response
Distortion
Hum & Noise
Dimensions (WxHxD)
AC-Line Voltage
Power Consumption
Weight
Accessories for Ceiling Speakers
For F-Series:
Back Can
HY BC1
Tile Bar Bridge
HY-TB1
For surface mount or pending For louvered ceiling support
installation of flush-mount
e.g. to reduce the load
speakers
22
Trim Ring
HY-TR1
For installation of flush-mount
ceiling speakers in larger existing holes or for louvered
ceiling support
Anchor Hanging Bracket
HY- AH1
For direct mounting to the ceiling with
anchor bolt e.g. for a weak louvered
ceiling
Accessories
Flush Mount volume controls
Attenuators
AT-12UP / AT-50UP / AT-12UPR / AT-50UPR
AT-063P (6W) / AT-303P (30W) / AT-603P (60W)
(for flush-mounting DIN 49037)
•
•
•
•
AT-063P / AT-303P
70
AT-603P
32.8
70
3.85
35.9
model AT-603P
INPUT CAPACITY 60W
TOA Corporation
MADE IN JAPAN
120
120
12-steps.
Matching with GIRA switcher accessories.
UPR-Version with priority relay.
AT-12UP/ UPR 12W, depth: 26mm
AT-50UP/ UPR 50W, depth: 40mm.
• With covered label.
• Colour: Off- white.
• Five attenuation settings
(OFF, 0/-6/-12/ -16dB), over an input
range from 0.5W to 6W (AT-063P),
30W (AT-303P) or 60W (AT-603P).
• Push-in connector (bridging terminal).
• Matching wall mounting boxes:
YC-301 (Flush-Mounting Back Box) and
YS-11A (Surface-Mounting Back Box).
OFF
OFF
Plate
Plate
32.8
3.85
Accessories for PC-1800 Series Speakers
Protection Cover
YS-270A
Attenuator
ATT-311
Applicable speakers: PC-1864/1863/ 1867/2668.
The Attenuator is mounted on the speaker’s rear.
Input: 3W.
• Dimensions for Fixing Hole: ø150mm.
• Weight: 140g.
• Finish: Cover; Heat-resistant ABS-resin,
Black.
Impedance Meter
ZM-104
Fast detection of short circuits etc.
• for easy and exact measurement of speaker line impedances.
• Battery driven for mobile use (4 Mignon (AA) batteries).
• 30 - 60 hours continuous use with one set of batteries.
• Built-in 1kHz oscillator.
• Range 5Ω - 100kΩ.
• graphic conversion table impedance - power.
• incl. a case and one set of test leads.
23
Mobile Amplifiers
Car System
CA-115 (max. 35W) / CA-130 (max. 60W) / CA-160 (max. 120W)
• Easy installation for 12V battery equipped vehicle.
• Compact and rugged.
• Two microphone inputs and convenient auxiliary
for tape recorder, radio,etc., connection.
• Unidirectional dynamic microphone with talk switch.
• Matching in DIN size car radio slot.
When connecting one horn speaker
178
MIC 2
MIC 1
POWER
MIC 2
AUX
MIC 1
MIC 2
MIC 1
POWER
MIC 2
0
10
0
10
50
MIC 1
50
AUX
Model
CA-115
CA-107
178
0
MAX 8mm
10
0
Model
CA-115
CA-130
CA-160
CA-207
CA-407
144
CA-115
MIC 2
MIC 1
0
0
Speaker
SC-615x2
SC-630x2
SC-650x2
SC-615 x 2
SC-650 x 2
SC-630 x 2
CA-160
Model
CA-115
CA-130
CA-160
CA-207
CA-407
POWER
MIC 2
10
Rated Input / Max
15W/30W
30W/60W
60W/120W
20W/30W
40W/60W
When connecting four horn speakers in serial-parallel
50
MIC 1
BLK
SC-630
CA-130
178
AUX
Speaker
SC-630
SC-615
WHT
When connecting two horn speakers in parallel
10
MAX 8mm
132
Rated Input / Max
15W/ (max. 30W)
10W/(max. 15W)
10
Rated Input / Max
15W/35W
30W/60W
60W/120W
20W/30W
40W/60W
Speaker
SC-610x4
SC-615x4
SC-630x4
SC-610x4
SC-615x4
BLK
BLK
WHT
WHT
BLK
BLK
WHT
WHT
BLK
BLK
WHT
WHT
SC-630x4
MAX 8mm
170
Model
CA-115
Power Supply
Current Consumption
Rated Power
Impedance
Distorsion
Frequency Response
Inputs
14V DC
14V DC
2.7A
4.4A
15W
30W
4Ω / 8Ω
4Ω / 8Ω
< 5%
< 5%
100 —10000Hz ±3dB
100 —10000Hz ±3dB
MIC 1,2: -48dBV, 600Ω;
MIC 1,2: -48dBV, 600Ω;
AUX: -6dBV, 10kΩ
AUX: -6dBV, 10kΩ
Front: ABS-Resin, black; Case: Zinc plated Steel
With talk switch, Impedance 600Ω, Sensitivity –73dB ±3dB, Cardioid
178 x 50 x 132mm
178 x 50 x 144mm
0.9kg
1.1kg
Finish
Microphone
Dimensions(W x H x D)
Weight
CA-130
CA-160
14V DC
9A
60W
4Ω / 8Ω
< 5%
100 —10000Hz ±3dB
MIC 1,2: -48dBV, 600Ω;
AUX: -6dBV, 10kΩ
see CA-115
178 x 50 x 170mm
1.2kg
Mobile Amplifiers with Cassette Deck
CA-107 (max. 15W) / CA-207 (max. 30W) / CA-407 (max. 60W)
0
10
Max. 15.5
182
0
10
50
75
• Matching in DIN size car radio slot.
• Built-in auto reverse cassette deck with pause
function.
• Equipped with muting system.
• Unidirectional dynamic microphone with talk
switch.
181,5
Model
CA-107
Power Supply
Current Consumption
Rated Power
Impedance
Distorsion
Frequency Response
Inputs
14V DC
14V DC
2.7A
4.4A
10W
20W
8Ω
4Ω / 8Ω
< 5%
< 5%
100 —10000Hz ±3dB
100 —10000Hz ±3dB
MIC 1,2: -48dBV, 600Ω;
MIC 1,2: -48dBV, 600Ω;
AUX: -6dB, 10kΩ
AUX: -6dB, 10kΩ
Front: ABS-Resin, black; Case: Zinc plated Steel
With talk switch, Impedance 600Ω, Sensitivity –73dB ±3dB, Cardioid
181,5 x 50 x 132mm
181,5 x 50 x 144mm
0.9kg
1.1kg
Finish
Mikrofon
Dimensions (W x H x D)
Weight
24
CA-207
CA-407
14V DC
9A
40W
4Ω / 8Ω
< 5%
100 —10000Hz ±3dB
MIC 1,2: -48dBV, 600Ω;
AUX: -6dB, 10kΩ
see CA-107
181,5 x 50 x 170mm
1.2kg
Portable Wireless
UHF-Band
WT-4810
WT-4820
Receiver
Diversity Wireless Tuner
for 2 UHF Modules
• UHF system which ensures low noise interference.
• Double Squelch and Diversity System supports a clear reception.
• Good distance coverage from microphone to tuner (up to 150m
on an open space).
• 16 Channels.
• Mixing input allows cascadation of several receivers (WT-4810).
• Two built-in antennas (WT-4810).
• Matching with WM-4210 / 4220 / 4310 / 4310A and WM-4310H
microphones.
Model
WT-4810
WTU-4800
Power Supply
Current consumption
Receiving Frequency
No. of Channels
Indicators
Dynamic range
Distorsion
Frequency Response
Ambient Temperature
Finish
Dimensions(WxHxD)
Weight
230V 50Hz (AC adaptor)
130mA (12V=)
794 - 865MHz
16
4
> 104dB
< 1%
100 - 12 000Hz, ±3dB
-10°C ... 50°C
ABS Resin, black
240 x 35 x 110mm
390g
7-12V DC
100mA
794 - 865MHz
16
>80dB
< 1%
100 - 12 000Hz, ±3dB
-10°C ... 50°C
Steel Case
60 x 25 x 139mm
130g
• WT-4820 rack mountable with optional mounting
brackets: MB-WT3 (for one WT-4820) or MB-WT4 (for
two WT-4820 side by side).
• WT-4820 accepts two optional wireless tuner modules
WTU-4800.
WTU-4800
UHF Tuner Module for WA-1822, WT-4820 and
MX-628
Wireless Microphones
WM-4210
WM-4220
WM-4310
WM-4310A
WM-4310H
Microphone (Speech & Vocal)
Microphone (Speech)
Lavaliere Microphone
Aerobic Set , sweat resistant,
Headset Microphone
Model
WM-4210
WM-4220
WM-4310
WM-4310A/ 4310H
Microphone Capsule
Frequency Response
No. of Channels
Battery
Batteriy life time
Indicators
Antenna
Ambient Temperature
Finish
Dimensions(WxHxD)
Weight
Accessories
Dynamic, Cardioid
794 - 865MHz
16
9V (6LR61)
>10h
On, Battery Status
integrated
- 10°C ... 50°C
ABS Resin coated
ø50 x 235.2mm
250g (incl. Battery)
Stand Adaptor, Etui
Screw driver
Electret Condenser, Cardioid
794 - 865MHz
16
9V (6LR61)
>10h
On, Battery Status
integrated
-10°C ... 50°C
ABS Resin coated
ø45 x 235.2mm
250g (incl. Battery)
Stand Adaptor, Etui
Screw driver
Electret, Cardioid
794 - 865MHz
16
9V (6LR61)
>10h
On, Battery Status
Herical Antenna
-10°C ... 50°C
ABS Resin coated
62 x 142 x 32mm
135g ( incl. Battery)
Etui
Screw driver
Electret, Cardioid
794 - 865MHz
16
9V (6LR61)
>10h
On, Battery Status
Herical Antenna
-10°C ... 50°C
ABS Resin coated
62 x 142 x 32mm
135g ( incl. Battery)
Waist Pouch (WM-4310A)
Screw driver
Portable Amplifier
WA-1822 / WA-1822C
Meeting Amplifier with (WA-1822C) and without (WA-1822) Cassette
with speaker and two optional wireless microphone channels
• Ideal for mobile PA: Portable Amplifier
for Schools, Conferences, Entertainment, etc.
• Selectable source: AC or battery operation.
• Battery status indication.
• Rated power 20W and 2-way speaker.
• Operation with wireless microphones with up to two optional
tuner modules WTU-4800 (UHF) or WTU-3800 (VHF).
• 2 built-in antennas.
25
Applicable room size
Model
WA-1822 / 1822C
Power supply
Rated power
Power Consumption
Frequency Response
Distorsion
Inputs
Speaker
S/N ratio
Ambient Temperature
Dimensions
Weight
Finish
230V~, 50 Hz or Dry cell: 8 x
AC: 20W; Battery: 8W
44VA
70…10 000Hz
< 1%
2 x MIC: -48dBV, 600Ω, AUX: -20dBV, 500kΩ
20cm Bass+ Horn or external: 8 - 16Ω min. 20W
> 70dB
0 — 40°C
298 x 460 x 200 mm
6 kg
white
Application
Class room
Conference room
Outdoor
Church
Gymnasium
Room size
8 x 14 m
8 x 10 m
15 x 15 m
10 x 15 m
15 x 15 m
VHF-Band
WT-3810
WTU-3800
Receiver
Tuner module for WA-1822/C
• Double Squelch and Diversity System supports a clear reception.
• Good distance coverage from microphone to tuner (within 150m
at an open space).
• 6 Channels.
• Mixing input allows cascadation of several receivers (WT-3810).
• Two built-in antennas (WT-3810).
• Applicable Microphones WM-3210 / WM-3220 / WM-3310 /
WM-3310H.
Model
WT-3810
WTU-3800
Power Supply
Current consumption
Receiving frequency
No. of channels
Indicators
Dynamic Range
Distortion
Frequency Response
Ambient Temperature
Finish
Dimensions(WxHxD)
Weight
230V, 50Hz (AC Adaptor)
150mA (12V=)
169 - 216MHz
6
3
> 100dB
< 1%
100 - 12 000Hz, ±3dB
-10°C ... 50°C
ABS Resin, black
240 x 35 x 110mm
380g
7-12V DC
100mA
169 - 216MHz
6
> 80dB
< 1%
100 - 12 000Hz, ±3dB
-10°C ... 50°C
Metal
60 x 25 x 139mm
130g
Wireless Microphones
WM-3210
WM-3220
WM-3310
WM-3310H
Microphone (Speech & Vocal)
Microphone (Speech)
Lavaliere microphone
Headset Microphone
Model
WM-3210
WM-3220
WM-3310
WM-3310H
Microphone
Frequency Response
No of Channels
Battery
Batter life time
Indicators
Antenna
Ambient temperature
Finish
Dimensions(WxHxD)
Weight
Accessories
Dynamc Cardioid
169 - 216MHz
6
9V (6LR61)
>10h
On, Battery Status
integrated
-10°C ... 50°C
ABS Resin coated
ø50 x 235.2mm
250g (incl. Battery)
Stand adaptor, Screwdriver
Electret Condenser, Cardioid
169 - 216MHz
6
9V (6LR61)
>10h
On, Battery Status
integrated
-10°C ... 50°C
ABS Resin coated
ø45 x 235.2mm
250g (incl. Battery)
Stand adaptor, Screwdriver
Electret Condenser, Cardioid
169 - 216MHz
6
9V (6LR61)
>10h
On, Battery Status
Herical Antenna
-10°C ... 50°C
ABS Resin coated
62 x 142 x 32mm
135g ( incl. Battery)
Screwdriver
Electret Condenser, Cardioid
169 - 216MHz
6
9V (6LR61)
>10h
On, Battery Status
Herical Antenna
-10°C ... 50°C
ABS Resin coated
62 x 142 x 32mm
135g ( incl. Battery)
Screwdriver
26
Megaphones
Hand-held Megaphones
ER-510 / ER-510W / ER-510S (10W)
ER-510 / 510W
ER-510S
• Compact, lightweight Megaphone with instant-on amplifier and howl-free dynamic
microphone with Press-to-talk Switch.
• Operates on 8 R6 type (AA) batteries.
• Trumpet and Enclosure from ABS Resin.
• Trumpet: white, strap black, others grey.
• ER-510W with whistle.
• ER-510S with Siren, Trumpet red.
Model
ER-510
ER-510W
ER-510S
Power
Signals
Audible Range
Batteries
Battery life (hours)
with Signal
Dimensions
Weight (w/o Batteries)
10W
approx. 250m
8 x 1.5V (R 6)
10
ø 160 x 260mm
620g
10W
Whistle
approx. 250m
8 x 1.5V (R 6)
10
30 Min.
ø 160 x 260mm
650g
10W
Siren
approx. 250m
8 x 1.5V (R 6)
10
40 Min.
ø 160 x 260mm
650g
ER-1015 / ER-1015S (23W)
ER-1015
• Compact, lightweight megaphone with instant-on amplifier and howl free dynamic
microphone with Press-to-talk Switch.
• Operates on 6 R14 type (C) batteries.
• Sanitary antibacterial treatment.
• Trumpet: white, strap black, others grey.
• ER-1015S with built-in Siren.
• enclosure: red (ER-1015S), Horn white, ER-1015: light blue.
Model
ER-1015
ER-1015S
Power
Signals
Audible Range
Batteries
Battery life (hours)
with Signal
Dimensions
Weight (w/o Batteries)
23W
approx. 315m
6 x 1.5V (R 14)
14
--210 x 291 x 319mm
970g
23W
Siren
approx. 315m (500m Siren)
6 x 1.5V (R 14)
14 .
20 Min.
210 x 291 x 319mm
980g
ER-1015S
Schoulder Type Megaphones
ER-2015 / ER-2015W (23W)
ER-2015
ER-604W (10W)
ER-604W
• Power Megaphone with instant-on amplifier and howl free operation.
Hand held dynamic microphone with Press-to-talk Switch.
• ER-2015W with whistle.
• Operates on 6 R14 type (C) batteries.
• Sanitary antibacterial treatment.
• Colour: Off-white.
Model
ER-2015
ER-2015W
ER-604W
Power max.
Signas
Audible Range
Batteries
Battery life
Dimensions(mm)
Weight (w/o Batteries)
23W
approx. 400m
6x1.5V(R14)
9h
210 x 210 x 310mm
1.1kg
23W
Whistle
approx. 500m Whistle
6x1.5V(R14)
9 h / Signal 20 min.
210 x 210 x 310mm
1.1kg
10W
Whistle
approx. 160m
8x1.5V(R6)/ext. 12V Adaptor
10 h / Signal 30 min.
102 x 258 x 216mm
1.6kg
• Compact Megaphone with hand held microphone. Howl free operation.
• Connection of Microphone Headset (optional WH-4000A/4000H) or
Hand-held microphone possible. For Standmounting, e.g. on ST-16.
• Aux Input e.g. for CD.
• Operation with 12 V adaptor (optional) or Battery.
• Enclosure: white, Strap black.
27
Mobile PA System
Powered Mixer
MX-628
Compact sized 8-Channel Stereo-Mixer with built-in Amplifier
• Featuring many functions and versatile expansion options for easy and fast setup.
• For mobile or fixed installation e.g. in Clubs, Banquet Rooms or Schools, etc.
• 6 Microphone Inputs with trim controls, 2 Stereo Inputs for CD or Cassette Player
and 2 Speaker Outputs with 60 Watt each.
• Slot for optional VHF/UHF Receiver Modules (WTU-3800/-4800) for the use with two
Wireless Microphones ( 2x YW-3510 wireless antennae required).
• One effect- and foldback control per channel.
• Output level with 4 bargraph LED level meters.
• Sum outputs with Bass- and Treble controls.
Model
MX-628
Microphone Inputs
6x: -66 ... -30 dBV, 600 Ohm, balanced, Input 1-4: XLR + Phone Jack, 5-6: Phone Jack
Aux Inputs
2x: Stereo: -10 dBV, 10 kOhm, RCA Pin Jacks
Effect-Input
1x: -10 dBV, 10 kOhm, Phone Jacks
Speaker Outputs
2x 60 W, 4Ω, push-in terminal
Outputs
Line Out (L,R),Monitor,Effect: +4dBV, 600Ω, 6,35mm Phone Jack (unbalanced)
Rec Out (L,R) -20dBV, 10kΩ, RCA Pin Jacks (unbalanced.)
Frequency Response
20....20 000 Hz (+1, -3dB) (AUX In)
Equiv. Noise ( 20...20000Hz BPF)
< -120 dB
Max. Gain
90 dB
Equalizer
10 kHz ±10dB Treble, 100Hz ±10dB Bass
Indicator
7 Segment LED meter (-20, -10, -6, -3, 0, +3, +6dB)
Finish
Steel plate, grey painted
Dimensions(W x H x D)
450 x 169 x 418 mm
Weight
13 kg
Accessories (Option)
WTU-4800 (UHF- Tuner module); WTU-3800 (VHF-Tuner module); YW-3510 (UHF&VHF-Antenna)
Application Example
WM-4210
F-160G/W
F-160G/W
SL-122
WM-4210
DM-1100
P-120D
ST-302
SL-122M
MX-628
ST-302
28
SL-122
P-120D
SL-122M
Cassette/
CD
WTU-4800 x 2
2-Way SR Speakers
2-Way Speaker
SL-122 / SL-152
520
600
Compact Integrated 2-Way Speaker System
380
460
310
310
• 30 cm (12”) woofer (SL-122 )/ 38cm (15”) woofer (SL-152).
• Constant directivity 90º horizontal x 40º vertical dispersion high-frequency horn with
piezo driver.
• 240 W continuous program material power capacity.
• Two 1/4” input phone jacks (in bridge out) for multiple speaker hookups.
• Interlocking corners for stacking, plus bottom-mounted stand adaptor.
• Rigid sealed-type enclosure with punched metal grille, plus heavy-duty carrrying strap.
SL-222
846
2-Way Twin Woofer Speaker System
380
310
• Two 30 cm (12”) woofer.
• Constant directivity 90º horizontal x 40º vertical
dispersion high-frequency horn with piezo driver.
• 240 W continuous program material power capacity.
• Two 1/4” input phone jacks (in bridge out) for
multiple speaker hookups.
• Interlocking corners for stacking, plus buttom-mounted
stand adaptor.
• Rigid sealed-type enclosure with punched metal.
grille, plus heavy-duty carrrying strap.
ST-32
Speaker Stand
Model
SL-122
SL-152
SL-222
System
2-Way sealed
2-Way sealed
2-Way sealed, Twin woofer
Continuous Program
240W
240W
240W
Dispersion
90° x 40°
90° x 40°
90° x 40°
Impedance
8Ω
8Ω
8Ω
Frequency Response
70 Hz ~ 20kHz
70 Hz ~ 20kHz
50 Hz ~ 20kHz
Crossover frequency
5kHz
5kHz
5kHz
SPL (1W, 1m)
95dB
98dB
96dB
Dimensions(WxHxD)
380 x 520 x 310 mm 460 x 600 x 310 mm
380 x 846 x 310 mm
Weight
12.8kg
19.9kg
15.7kg
Applicable Room Size
Application
Music
Speech and Background Music
MX-628
+
2 x SL-122 /ST-32
15 x 15 m
15 x 20 m
MX-628
+
2 x SL-152 /ST-32
18 x 25 m
18 x 35 m
29
Open Conference System
• Suplies DC Power to all units; lamp indicator.
• Jack for microphone input, and AUX 1 & 2 input
Jack for access to PA and BGM system.
• Microphone, AUX 1, line (for conference unit’s
built-in speaker) and chime (on chairman’s unit)
volume controls.
• Delegate’s unit simultaneous operation (1,2,4, or
6) and automatic mic-off setting (OFF/20-sec/40sec) switches.
• Line 1 & 2 output connection terminals each for
35 conference units.
• RCA pin-jack and phone-jack recording output
terminals .
• System expandable to 140 units by connection of
2 additional center amplifiers as expansion
amplifier (35 units per expansion amplifier).
TS-700
210
Center Amplifier
AUX 1
MIC
LINE
LINE CONTROL
MIC LIMITER
2
4
6
1
10
0
10
0
TIME OUT
20s
OFF
POWER
40s
93
0
10
AUX 2
CENTER AMPLIFIER
TS-700
300
TS-701
Chairman’s Unit
393
59
147
LED
TS-701
PRIORITY
TALK
Top View
TS-702
Delegate’s Unit
170
393
59
147
LED
• Removable gooseneck microphone and built-in
speaker.
• A ring-shaped LED on the microphone indicates
that the microphone is on.
• To prevent howling, the built-in speaker is turned
off while the microphone is on.
• Press-to-talk priority speech button activates
chime and overrides delegate’s unit (TS-701 only).
• Press-to-talk button.
• Recording output mini-jack for connection to a
recording device.
• Multiple simultaneous chairman’s units operation
possible.
• 8P quick-lock type mini-DIN socket.
• Connection cord supplied.
TS-702
TALK
Top View
Model
TS-700
TS-701
Power Requirements
Power Consumption
Input
220/230V AC, 50/60Hz (selectable)
Max. 135W
Mic: 600Ω, -60dBV, AUX 1; 10kΩ, -20dBV, AUX 2: 600Ω, -20dBV,
unbalanced, phone jack,
Line 1 & 2: 0dBV
Recording; 10kΩ, -20dBV, unbal, phone jack, 2x RCA jack
Line 1 & 2; 0dBV, unbalanced
Speaker Restriction can be set to 1,2,4, or 6/Automatic
Mic off Function; off, 20sec., 40sec., (selectable)
Max. 70 units/Max. 35 units per line (max. 140
units when 2 expansion amplifiers connected
210 x 93 x 316mm
Colored steel plate, Semi-mat black
3.9kg
Power cord x 1
35V DC, under 30mA supplied from center amplifier
-Gooseneck Microphone; Unidirectional electret condenser
mic, -60dBV, with LED, detachable type/Line; 0dBV, unbal.
Output
Control
Number of connectable
Conference Units
Dimensions (WxHxD)
Finish
Weight
Standard Accessories
Recording; 10kΩ, -20dBV, unbalanced, mini jack/Line; 0dBV
unbalanced Internal Speaker; 130Ω, 200mW
Speech button, Priority Button
Speech Button
--
TK-708A / TK-712A
Extension Cable
Carrying and Storage Case
30
--
170 x 59 x 147mm (microphone excluded)
Base; ABS resin, Semi-mat black/Speaker; Metallic brown
560g
Connection cord 1m+ 2m (with 2x 8P quick lock type miniDIN plugs and 1 socket) x 1
YR-700
For connection of a TS-700
expansion amplifier or the
connection of two
conference units.
1m + 10m long.
TS-702
TK-708A
For 1 Center Amplifier, 8 units and
the cables.
TK-712A
For 12 units and the cables.
AR-71
• Long-term recording without a break
is possible.
• Uses C-60 or C-90 type tapes.
• Built-in AGC keeps recording level constant.
• Deck-1 for recording and Deck-2 for
recording and playback.
• External mic input.
• Headphone recording monitoring.
• Mountable on EIA-standard rack using
optional YM-003B kit.
• Buzzer/LED tape end warning signals.
Protocol-Recorder
1
2
AR-71
POWER
REC LEVEL
ON
TAPE
C90
STOP
OFF
C60
REC
PAUSE
PLAY
STOP
PLAY
ALARM
MIC
PHONES
140.5
433.5
346
Model
AR-71
Power supply
Power Consumption
Inputs
Outputs
Frequency Response
Distorsion
S/N ratio
Wow and Flutter
Recording Overlap
Dimensions(W x H x D)
Weight
Finish
AC 230V, 50Hz
12W
MIC -62dBV, 600Ω; Line -20dBV, 50kΩ unbalanced
Line 0dBV, 600Ω, unbalanced
Cassette 100Hz - 7kHz, MIC 100Hz - 15kHz
<2%
>50dB
<0.1% WRMS
60 ±5 Seconds
434 x 141 x 340 mm
8.1kg
black
System Example
max. 100m
AR-71
Protocol Recorder
TS-701
Chairman’s Units
TS-702
TS-701 )
TS-702
Delegate’s Units
TS-700
Central Amp
REC OUT
Line 1
Max. 70 Units
Microphone
MIC IN
Line 2
AUX 1
TS-702
CHANNEL
OFF
10
0
10
1
0
F
2
E
3 4 5
DC B
ANT
A
AF PEAK
TS-702
POWER
B
6
7
8
9
A
DIVERSITY WIRELESS TUNER
WT-4810
YR-700 Cable
UHF Microphone System
Amp
BS-1030
Speaker
YR-700 Cable
VOLUME
0
TS-702
max. 100m
TS-701
TS-700
Expansion Amp
Line 1
Line 2
Line 1
Line 2
TS-702
)
TS-702
Max. 35
Units
F-160G
Speaker
Max. 35
Units
TS-700
Expansion Amp
External PA-System
TS-702 Delegate’s Units
System Expansion
Information
Connectors
XLR Connectors
XLR-3-13
Panel Jack, round
Female (F)
XLR-3-11C
XLR-3-31
Panel jack, rectangular
Male (M)
XLR-3-12C
XLR-3-32
Panel jack, rectangular
XLR-3-14
Panel Jack, round
Phone Plugs
DIN Connectors
5 P DIN Plug
8P DIN Plug
Phone Plug
(Unbalanced)
Phone Plug
(Balanced)
31
TECHNICAL COLUMN
MICROPHONES
Wiring of microphones
Output from a microphone is rather weak; therefore, it is important
to use shielded cable for microphones to prevent line noise. The
low impedance shielded cable intended for microphones are
commercially available. The shielded cable is generally used to
transmit the audio signals from microphones ( -70 dB/0.3mV) or
source equipment (0dB/1V).
balanced output, and single-cored shielded cable is used for
connecting unbalanced output.
(a) Balanced
Connection
Microphone cord
(double-cored shielded cable)
HOT
Microphone
COLD
Balanced and unbalanced type
Signal
(HOT)
COM or
ground
Unbalanced microphone plug
COM or
ground
(b) Unbalanced
Connection
Signal
(COLD)
Signal
(HOT)
(HOT)
Balanced microphone plug
Balanced amp.
input
Balanced and unbalanced output
There are two kinds of output from a microphone: balanced and
unbalanced. With balanced output, the audio signal appears
between the hot (on-going audio signal) and cold (return audio
signal), which are both independent of the ground. With unbalanced
output, the audio signal appears between the hot and ground
(connected to the cold). The connection between balanced output
and balanced input (on the amplifier side) is virtually unaffected by
external line noise, and it is used for wiring between long distances.
Double-cored shielded cable is used for connecting
(G)
Microphone cord
(single-cored shielded cable)
HOT
Microphone
Unbalanced amp.
input
(COLD)
Shielded cable
(double core)
COLD
(G)
Connection to microphone body
(HOT)
Shielded cable
(single core)
Amplifier
HOT
COLD
(G)
Amplifier
HOT
COLD
(G)
Distance of extension for microphone cords
The following table shows the maximum extension distance for
microphone cords. When distance extends beyond the following
figures, exessive noise will make the microphone impractical,and
therefore it will be necessary to use a microphone pre-amplifier to
boost the signal level to minimize the influence of noise.
Microphone output
Amplifier input
Unbalanced
Balanced
Balanced
Unbalanced
Unbalanced
Balanced
Microphone cord
extension distance
20m
20m
80m
Speakers
Rough guide for noise levels and audio levels
necessary for loudspeaker (for all types of speakers)
Noise levels are expressed in decibels (dB). Below are some
typical examples.
Noise level (dB) 50
Inside a
movie theatre
Normal office,
restaurant,
hotel lobby
80
70
60
90
The SPL (1W/1 m) indicates the sound pressure level at a point
1 meter away from a speaker when an alectric input of 1 W is
applied to that speaker. This is used to express comparative
speaker efficiency, such as in a catalog.
Attenuation of SPL due to distance
(amount of attenuation = 20 log D D: distance in meters from speaker)
Noisy office,
department store,
super market
Printing plant
Heavy- industry plant
Can be undestood speaking in a normal voice
Must raise
one’s voice to
be understood
Must yell just
to be heard
When transmitting voice or music through a speaker, it is
necessary to transmit at a level that is higher than the ambient
noise level. In the case of voice transmission, it should be
transmitted at a level 5 to 10 dB higher than the noise level,
background music 3 to 5 dB higher, and foreground music 15 to 20
dB higher.
Computation of intensity of sound
As an index to express the intensity of sound from a speaker,
sound-pressure level (in dB) is generally used. The soundpreassure level rises as the electric input to the speaker increases,
and falls as distance from the speaker increases. This relationship
is shown by the following formula:
32
Attenuation of SPL
Amount of increase of
SPL (dB) = SPL (1W/1m) +
due to distance
SPL due to electric input
Distance (m)
Amount of
attenuation (dB)
2
6.0
5
10
15
20
30
40
60
80
100
14.0 20.0 23.5 26.0 29.5 32.0 35.6 38.1 40.0
Increase of SPL due to electric input
(amount of increase =10 log W W: electric input)
Electric input (W) 1 1.5
3
5
6
10
15
Amount of
0 2.6 4.8 7.0 7.8 10 11.8
increase (dB)
20
30
13 14.8
50
17
Example of calculation:
The SPL(1w/1m) of the model SC-615M is shown as 112 dB. The soundpressure level of this model at distance of 10 meters with an input of 10 W can
be calculated as follows according to the above table:
SPL = 112 dB - 20 dB (10m) + 10 dB (10W) = 102 dB
Arrangement of speakers in a general office
(Ceiling speakers)
Ceiling-mounted speakers are generally used, and their coverage
angle is between 90 and 120 degrees. The smaller the distance
between speakers, the better the sound quality and the more even
the sound volume. The following table shows the area that can be
covered by one speaker.
Distance between speaker
90 - 120°
Height of ceiling
Height of ears
1.4 m
Area of coverage of one speaker
Purpose
Height of ceiling
Background music
Less than 2.5 m
2.5 - 4.5 m
4.5 - 15 m
Distance between
speakers
6m / 5 m
7m / 6 m
10m / 8 m
9 to 12 m
Announcement
Artea of coverage
of one speaker
About 36 / 25 m2
About 49 / 36 m2
About 100 / 64m2
81 to 144 m2
For general office use without background music, speakers should
be arranged about 5 to 6 meters apart. Shown below is an example
of speaker arrangement in a 12 m x 18 m office with ceiling height
of 3 m, which indicates that this office requires about 6 speakers.
Arrangement of speakers in a factory (Horn speakers)
Factories with high noise levels generally use horn speakers,
which can produce high levels of sound. If you know where people
are working in the factory, speakers are best arranged to cover
such locations. If that is unknown, speakers should be arranged
in accordance with the floor space.
Here is an example of a 40 m x 90 m room in factory with a noise
level af 85 dB. In this factory, SC-615M speakers are installed;
therefore, the sound pressure that can be obtained at a point 20
meters away with electric input of 15 W will be:
[112 dB (1W/1m) - 26.0 dB (20 m) + 11.8 dB (15 W)]=97.8 dB
This is a sufficient sound pressure level, 10 dB higher than the
noise level. The speakers are installed 20 to 30 meters apart, and
6 speakers can generally cover the area.The sound pressure level
near speakers is rather high, so it is necessary to install the
speakers at a height of more than 4 meters.
SC-615M
rated input 15W
40 m
Arrangement of speakers
Example of arrangement
97.8 dB
15 m
Noise level of 85 dB
(neccesary sound-pressure level of 95 dB)
30 m
15 m
Speaker wiring
For speaker connections, use 600V vinyl (PVC) insulated wire of
1.2mm to 1.6mm in diameter (AWG17 to AWG 14)
Number of speakers : 6
12 m
30 m
90 m
Office of 12 m x 18 m with 3 m ceiling
height, without music
18 m
Amplifiers
High-impedance connection and low-impedance
connection
The PA amplifiers generally come with low-impedance speaker
outputs (indicated as 4 Ω, 8 Ω, 16 Ω, etc) and high-impedance
outputs (indicated as 70V, 100V, etc). Low-impedance output is
used when a small number of speakers (1 to 4) is used and there
is a short distance (10-some meters) between amplifiers and
speakers. High-impedance output, is used with a large number of
speakers and a long distance of wiring. Speakers with
transformers are used for high-impedance output. For a PA
system. high impedance connection should be used if possible, in
consideration of wrong speaker connections and transmission
efficiency.
Example of low-impedance connection:
It is necessary to design the total speaker input impedance to be larger than or equal
to the amplifier’s output impedance. Else unstable operation or amplifier malfunction
may result.
The wiring distance between amplifier and speaker should be less than 10 meters. If
the wiring distance is longer than this, the output power from the amplifierwill be
consumed as heat in the cables, and not be able to supply the speaker with sufficient
power and may result in a loss of sound quality .
4Ω Output
4Ω
In high-impedance connection, as long as you have parallel connection it will be
sufficient to design the total speaker input power to be equal or lower than the amplifier’s
output power, and this will help to eliminate a complex impedance calculation.
100 V Output
60W
1 kΩ H
10W
(10W/ C
100V line)
1 kΩ H
10W
(10W/ C
100V line)
1 kΩ H
10W
(10W/ C
100V line)
Speaker input impedance (10W/100 V line)
100 (V)2
Z=
= 1 kΩ
10 (W)
Total impedance of
Amplifier output
speakers
impedance
1
2
Z=
= 167 (Ω)
100 (V)
1 + 1 + 1 + 1 + 1 + 1
Z=
= 167 (Ω)
60 (W)
1 k(Ω) 1 k(Ω) 1 k(Ω) 1 k(Ω) 1 k(Ω) 1 k(Ω)
Amplifier output power 60 W = total speaker input power (60 W)
Even when connecting speakers with different input power, there will be no problem as
long as the total wattage of the speakers does not exceed the amplifier output power.
H
4Ω Output
Example of high-impedance connection:
In a PA system covering a large area, the wiring distance will be greater, so high
impedance connection is used predominantly. In a high-impedance connection,all
speakers (each with a transformer) will be connected in parallel. Avoid using these
speakers together with those without transformers.
C
Total impedance
H
of speakers
8Ω
C
4Ω
H
8Ω
H
Total impedance
8Ω Output of speakers
8Ω
8Ω
8Ω
1
1
+
8Ω
8Ω
120W
H
8Ω
C
H
C
H
8Ω
C
4Ω =
C
100 V Output
1
C
8Ω =
1
1
1
+
8Ω + 8Ω 8Ω + 8Ω
Amplifier output
impedance
100 (V)2
Z=
= 83 (Ω)
120 (W)
1.7 kΩ H
6W
6W
6W
1.7 kΩ H
1.7 kΩ H
330Ω
(6W/ C
100V line)
(6W/ C
100V line)
(6W/ C
100V line)
H
(30W/ C
100V line)
30W
30W
330 Ω H
(30W/ C
100V line)
Total impedance of speakers
Z=
1
1
+
1
1.7 k(Ω) 1.7 k(Ω)
+
1
+
1
1.7 k(Ω) 330 (Ω)
+
1
= 128 (Ω)
330 (Ω)
Amplifier output power 120 W > total speaker input power(78 W)
33
Application Example 2
OFFICE
30m
Ceiling Speaker
AT-12UP
Executive Offices
EC-100M
A-1031
Meeting
Room
5m
15m
5m
Reception
Office Area
•
•
•
•
Emergency paging possible (5m distance among the speakers).
Announcements with chime from the receiption.
One speaker for each room.
Individual adjustment of the volume in each office room.
Ceiling speakers
A-1031
CD
MIC 1
MIC 2
MIC 3
AUX 1
AUX 2
BASS
TREBLE
MASTER
POWER
Volume Control
RADIO
TUNER
PA
AMPLIFIER
model A-1121
AT-12UP
AT-12UP
1.5 W
1.5 W
x1
Receiption
EC-100M
AT-12UP
AT-12UP
1.5 W
x6
one per office
1.5 W
AT-12UP
1.5 W
x2
Meeting room
1.5 W
1.5 W
x7
Staff area
GYMNASIUM
32m
AT-12UP
Ceiling Speaker
EC-100M
Change Room
F-240WM/GM
Gymnastic Area
A-1121 and A-1061
20m
• Good sound quality.
• Wireless microphones for the instructor.
• Announcements from the reception.
Resting Area
Reception
WT-4810
AerobicsMicrophone
WM-4310A
30W
A-1121
MIC 1
PA
MIC 2
AMPLIFIER
MIC 3
AUX 1
AUX 2
BASS
TREBLE
MASTER
POWER
TREBLE
MASTER
POWER
30W
F-240WM/
F-240WM/GMGM x 4
Gymnastic Area
model A-1121
CD /
Cassette
A-1061
MIC 1
MIC 2
MIC 3
AUX 1
AUX 2
BASS
3W
3W
3W
3W
Cassette
PA
EC-100M
34
AMPLIFIER
model A-1121
Ceiling speaker x 11
Changing room / resting area
Ceiling speaker x 2
Receiption
Application Example 3
About TOA
Mosque / Club House etc.
18m
EM-400
Since it’s foundation in 1934 the TOA Corporation had a leading
effect upon the development of the acoustic and communication
technology. Among others TOA invented the Reflex Horn as well as
the Transistor Megaphone. Several patents and state of the art
products stand for an unequalled innovative company.
DM-1300
TZ-205 or BS-1030B
A-1121
TOA operates in more than 100 countries worldwide. This branch,
TOA Electronics Europe, is responsible for the sales and distribution
of TOA Products throughout mainland Europe, Middle East and
Africa.
TOA products range from amplifiers and speakers used in
foreground and background music systems, to mixers, wireless
microphone systems and digital processors used in sound
reinforcement, to intercom security systems.
This catalogue offers a selection of products from these ranges
- Public Address
- Professional Sound System
10m
• Background music inside.
• Separate outdoor sound (e.g. from minaret or paging during a
competition, etc.).
• Separate volume controls for indoor and outdoor.
for the design of small up to intermediate sized sound systems.
OFF
DM-1300
A-1061
EM-400
MIC 1
MIC 3
AUX 1
TZ-205
AUX 2
BASS
TREBLE
MASTER
POWER
10
8
6
ON
4
10
0
For further information for the design of intermediate to large
sound systems please contact your local dealer. Such systems are
built-up with the Venas and Smart Matrix systems components.
Dedicated to security applications the VX-2000 series fulfills the EN
60849 standard.
A basic demand in any kind of security application is a high grade
of intelligibility. And a good sound quality is an essential condition
for it.
MIC 2
10
0
PA AMPLIFIER
10
0
10
0
10
0
0
-10
OFF
2
+dB
0
-10
10
0
model A-1121
REC. OUT
A-1061
MIC 1
MIC 2
AUX. IN
MIC 3
AUX 1
AUX 2
BASS
TREBLE
MASTER
POWER
10
TC-630M
e.g. for Minaret
8
6
ON
4
0
10
PA AMPLIFIER
0
10
0
10
10
0
0
-10
10
0
OFF
2
+dB
0
-10
0
10
model A-1121
Church
20m
DM-1300
Sound quality and safety are part of our concept: safe & sound.
WM-4310
BS-1030W + WCB-12W or BS-1110 / BS-1120
A-1121 (120W)
Cassette / CD
15m
• Good sound quality.
• Clear and intelligible speech transmission
• Wireless microphones for free movement.
OFF
DM-1300
A-1121
OFF
DM-1300
MIC 1
MIC 2
MIC 3
AUX 1
AUX 2
BASS
30W
TREBLE
MASTER
30W
POWER
10
8
Smart Matrix SX-1000 Series
Venas VX-2000 Series
6
Venas VM-2000 Series
ON
4
10
0
PA
Lavaliere
Microphone
WM-4310
Cassette
/ CD
0
AMPLIFIER
10
0
10
0
10
0
10
-10
0
-10
0
2
+dB
0
OFF
8
10
model A-1121
BS-1030W
WT-4810
PC-643S
PC-644S
BS-677B / 677BT
BS-677W / 677WT
F-160G / 160GM
F-160W / 160WM
F-240G / 240GM
F-240W / 240WM
PC-645R
PC-646R
PC-1864
PC-1867 / PC-1863
PC-2668
BS-1030B
BS-1030W
BS-330 / 330T
Packaged Audio Products
ef
www.toa.de
© TOA Electronics Europe GmbH
(0803) 833TEEC076
Specifications are subject to change without prior notice. Errors excepted.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement