Dräger X-am ® 7000
Dräger X-am® 7000
Multi-Gas Detection
Dräger X-am® 7000 is the solution for the simultaneous and continuous
measurement of up to five gases. It is the ideal companion in a variety of
applications where the reliable detection of oxygen, toxic and combustible
gases and vapors are necessary.
DrägerSensors
Space for up to 5 sensors,
3 electrochemical and 2 catalytic
bead or infrared sensors
or a photo ionization
detector (PID).
Robust enclosure
Rugged, water-tight with
a standard integrated rubber boot.
Large display
Clearly structured, scratch resistant display
with information in plain text.
ST-67-2006
Alarm functions
360° visible and > 100 dB
multi-tone audible alarm.
02 | Dräger X-am® 7000
Benefits
Flexibility through sensor variety
The extensive portfolio of over 25 different DrägerSensors enables the detection of more than 100 gases and
vapors. The Dräger X-am 7000 can be equipped with three electrochemical, and two catalytic bead, infrared
or photo ionization sensors. During operation, it is also possible with the catalytic-Ex sensor to change the gas
being measuring or the measurement range of the sensor. In this way, the instrument can be easily adapted to
various applications. DrägerSensors are renowned for their fast response time, minor cross sensitivities, high
level of accuracy and long lifetimes.
Intelligent and interchangeable sensors
In addition to the electrochemical sensors, the catalytic, infrared and photo ionization sensors are automatically
recognized by the instrument upon insertion. All sensors are pre-calibrated, and therefore a reconfiguration
of the Dräger X-am 7000 can be done by simply changing the sensor. No additional service or maintenance is
necessary.
Poison resistant Ex-sensor
Advanced safety in explosive atmospheres: thanks to the high sensitivity of the innovative Ex-sensor to
combustible organic vapors the Dräger X-am 7000 warns reliable of danger of explosions. It not only responds
quickly to combustible gases and vapours, it is also characterised by its high resistance against silicone and
hydrogen sulphide contamination. In combination with the high degree of drift stability, this resistance enables
an extraordinarily long service life of more than four years. This will reduce your operational costs.
Robust and watertight
In addition to the built-in dust and water filter, the Dräger X-am 7000 can be submersed in up to 1 m or 3 ft. of
water without damage. A specially designed rubber boot protects the instrument against damage even from a
drop of 1.5 m or 5 ft.
Built for longevity
The completely new design of the rechargeable battery pack with intelligent chargingmanagement guarantees
full functionality of the instrument over a period of up to 20 hours. An alkaline battery pack is also available.
The DrägerSensors used in the Dräger X-am 7000 have a typical lifetime of over 5 years. If, over time, a sensor
exchange is necessary, the modular approach of the instrument allows for this in a few simple steps.
Multiple alarms
Alarm conditions can not be ignored because of the extremely loud multi-tone horn. In addition, the visual alarm
can be seen 360°, ensuring that the user notices the warning. By generating an optional life-signal every six
seconds, the Dräger X-am 7000 confirms that it is functioning properly.
Dräger X-am® 7000 | 03
Benefits
Integrated pump
A built-in high-performance pump draws in the gas to be measured through a hose of up to 45 m length. The
pump is continuously monitored for blockages.
Easy detection of leakages
A flexible “gooseneck” probe eases the search for leakages on pipelines, valves, flanges, etc. In the trackingmode, the instrument generates an increasing or decreasing rate of beeps, depending on the gas concentration
detected.
Information at one glance
The large graphic display and the auto-zoom function during alarms guarantee an easy recognition of the
measurement values and symbols displayed for immediate reaction to the situation or hazards. All information is
provided in plain text for easy understanding.
Intuitive software functions
The software menu within the Dräger X-am 7000 was designed in partnership with our customers making it
simple and easy to use. With the help of Dräger CC-Vision software, up to five different detection applications
can be saved within the instrument. By doing so, the use of different instrument configurations can be set for
that specific application. During operation, a simple change between these set parameters can be done via the
instrument‘s menu.
Data management
An integrated data logger logs up to 3000 sets of values – that equals 100 hours when recording one set per
minute. The data can then be transferred to and evaluated on a PC using an infrared interface together with the
Dräger GasVision software package.
04 | Dräger X-am® 7000
System components
DrägerSensor XS
D-12175-2010
DrägerSensors XS are ahead of the field thanks to their high reliability
and warranty periods of up to 5 years. Dräger's smart technology
allows simple sensor installation and switching using the plug-and-play
technology.
Dräger Catalytic Ex-Sensors
D-31728-2011
Multiple gases at the same time: The DrägerSensor Cat Ex measures
combustible gases and vapors in the air.
PID sensors
ST-1540-2007
Be on the safe side: Many explosive hazardous substances are
toxic for humans, at levels markedly below the LEL (Lower Explosive
Limit) and cannot be detected at these levels by using only catalytic
sensors. Reliable detection of such substances in the ppm range is
accomplished using photoionization detectors (PIDs).
Dräger Infrared Sensors
D-2105-2011
Compact and powerful: The durable Dräger infrared sensors work very
accurately and precisely, even in oxygen-free atmospheres and they
also have an excellent cost of ownership.
Dräger X-am® 7000 | 05
System components
Dräger Bump Test Station
ST-740-2006
Easy to use, stand-alone and portable. With the Bump Test Station,
functionality tests of gas detection and warning devices can be carried
out easily and quickly.
Accessories
ST-15003-2008
Rechargeable power pack NiMH
ST-4705-2005
Alkaline power pack (without alkaline batteries)
06 | Dräger X-am® 7000
Accessories
ST-14990-2008
Charging module
ST-15006-2008
Leather carrying case
Power Supply
D-12287-2009
For up to eight charging modules
ST-14354-2008
Car mounting kit
Dräger X-am® 7000 | 07
Related Products
Dräger X-am® 5000
ST-9466-2007
The Dräger X-am® 5000 belongs to a generation of gas detectors,
developed especially for personal monitoring applications. This 1- to
5-gas detector reliably measures combustible gases and vapors as
well as O2 and harmful concentrations of toxic gases, organic vapors,
Odorant and Amine.
Dräger X-am® 5600
D-27784-2009
Featuring an ergonomic design and innovative infrared sensor
technology, the Dräger X-am 5600 is the smallest gas detection
instrument for the measurement of up to 6 gases. Ideal for personal
monitoring applications, this robust and water-tight detector provides
accurate, reliable measurements of explosive, combustible and toxic
gases and vapors as well as oxygen.
08 | Dräger X-am® 7000
Technical Data
Dimensions (W x H x D)
150 x 140 x 75 mm; 5.9 x 5.6 x 3 in.
Weight
Instrument
600 g; 21 oz.
Rechargeable battery
490 g; 17 oz. (3.0 Ah)
730 g; 26 oz. (6.0 Ah)
Temperature
-20 to +55 °C, short-term -40 to +60 °C
-5 to +105 °F, short-term -40 to +130 °F
Pressure
700 to 1300 hPa
Humidity
10 to 95 % r.h.
Ambient conditions
Ingress protection
IP 67
Battery life
NiMH (4.8 V / 3.0 Ah)
> 9 hours
NiMH (4.8 V / 6.0 Ah)
> 20 hours
Alkaline
> 20 hours
Alarms
Visual 360° flashing LEDs, audible alarm (> 100 dB at 30 cm or 1 ft.)
Charging time
3.5 to 7 hours, depending on battery type
Pump mode
Maximum hose length of 45 m; 150 ft.
Approvals
ATEX
II 2G Ex d ia IIC T4 Gb
- 20 ≤ Ta ≤ +60 °C (NiMH)
- 20 ≤ Ta ≤ +40 °C (Alkaline)
I M2 Ex d ia I Mb
BVS 03 ATEX E 371 X
Measurement performance certificate
according to:
EN 50271:2001
EN 60079-29-1 (for the CatEx sensors from
methane to nonane and infrared sensors)
EN 45544-1 + 2 (CO, H2S, CO2)
EN 50101 (O2)
MED
Marine Equipment Directive 96/98/EC
UL
Class I, Div 1, Group A, B, C, D Temp.
code T4
- 20 ≤ Ta ≤ + 60 °C (NiMH)
- 20 ≤ Ta ≤ + 40 °C (Alkaline)
CSA
Class I, Div 1, Group A, B, C, D Temp.
code T4
- 20 ≤ Ta ≤ + 60 °C (NiMH)
- 20 ≤ Ta ≤ + 40 °C (Alkaline)
IECEx
Ex d ia IIC T4 Gb
- 20 ≤ Ta ≤ + 60 °C (NiMH)
- 20 ≤ Ta ≤ + 40 °C (Alkaline) Ex d ia I Mb
CE-mark
Electromagnetic compatibility (directive
2004/108/EG)
Ordering Information
Description
Order code
Dräger X-am® 7000, basic unit including a calibration adapter,
water- and dust-filter
In order to receive a fully operational unit, a power pack and up
to 5 sensors have to be ordered. An optional, integrated pump or
data logger can also be included.
83 17 400
Dräger X-am® 7000 | 09
Ordering Information
Power supply units
Rechargeable power pack NiMH 4.8 V / 3.0 Ah
83 17 408
Rechargeable power pack NiMH 4.8 V / 6.0 Ah
83 17 454
Alkaline power pack
83 17 550
Alkaline batteries (4 pcs.)
83 17 447
Charging accessories
Charging module
83 16 487
Power supply for up to eight charging modules
83 15 805
Power supply for one charging module
83 15 635
Power supply for up to two charging modules
83 16 994
Power supply for vehicles
83 12 645
Car mounting kit
83 18 169
Description
Measuring range
Order code
DrägerSensor Smart IR Ex
0 – 100 %LEL
0 – 100 Vol.-% CH4
68 10 460
DrägerSensor Smart IR CO2
0 – 5 Vol.-%
68 10 590
DrägerSensor Smart IR CO2 HC
0 – 100 Vol.-%
68 10 599
DrägerSensor Smart CatEx PR
0 – 100 % LEL
68 12 970
DrägerSensor Smart CatEx HC PR
0 – 100 % LEL
0 – 100 Vol.-% CH4
68 12 980
DrägerSensor Smart CatEx FR PR
0 – 100 % LEL
0 – 100 Vol.-% CH4
68 12 975
0 – 2,000 ppm
83 19 100
DrägerSensor XS 2 CO
0 – 2,000 ppm
68 10 365
DrägerSensor XS EC CO
0 – 2,000 ppm
68 09 105
DrägerSensor XS R CO
0 – 2,000 ppm
68 10 258
DrägerSensor XS EC CO HC
0 – 10,000 ppm
68 09 120
DrägerSensor XS 2 H2S
0 – 100 ppm
68 10 370
DrägerSensor XS 2 H2S SR
0 – 100 ppm
68 10 575
DrägerSensor XS EC H2S 100
0 – 100 ppm
68 09 110
DrägerSensor XS EC H2S HC
0 – 1,000 ppm
68 09 180
DrägerSensor XS R H2S
0 – 100 ppm
68 10 260
DrägerSensor XS 2 O2
0 – 25 Vol.-%
68 10 375
DrägerSensor XS EC O2 100
0 – 100 Vol.-%
68 09 550
DrägerSensor XS EC O2 LS
0 – 25 Vol.-%
68 09 130
DrägerSensor XS R O2
0 – 25 Vol.-%
68 10 262
DrägerSensor XS EC Amine
0 – 100 ppm
68 09 545
DrägerSensor XS EC Cl2
0 – 20 ppm
68 09 165
DrägerSensor XS EC ClO2
0 – 20 ppm
68 11 360
DrägerSensor XS EC CO2
0 – 5 Vol.-%
68 09 175
DrägerSensor XS EC COClx
0 – 10 ppm
68 08 582
DrägerSensor XS EC H2
0 – 2,000 ppm
68 09 185
DrägerSensor XS EC H2 HC
0 – 4 Vol-%
68 11 365
DrägerSensor XS EC HCN
0 – 50 ppm
68 09 150
Infrared Sensors
Catalytic Bead Sensors
PID Sensor
DrägerSensor Smart PID
Electrochemical Sensors
10 | Dräger X-am® 7000
Ordering Information
DrägerSensor XS EC Hydride
0 – 20 ppm
68 09 135
DrägerSensor XS EC NH3
0 – 300 ppm
68 09 145
DrägerSensor XS EC NO
0 – 200 ppm
68 09 125
DrägerSensor XS EC NO2
0 – 50 ppm
68 09 155
DrägerSensor XS EC Odorant
0 – 40 ppm
68 09 200
DrägerSensor XS EC OV
0 – 200 ppm
68 09 115
DrägerSensor XS EC OV-A
0 – 100 ppm
68 09 522
DrägerSensor XS EC PH3 HC
0 – 1,000 ppm
68 09 535
DrägerSensor XS EC SO2
0 – 100 ppm
68 09 160
Calibration and Communication Accessories
Calibration adapter
83 17 656
Sensor extension cable for the calibration with vapors
83 17 970
Dräger X-am® 7000 E-Cal Module
83 17 705
Dräger Bump Test Station for Dräger X-am® 7000
Complete with one test gas cylinder 58 L (gas and concentration variable)
83 19 072
Dräger Bump Test Station for Dräger X-am® 7000, not including gas cylinder
83 18 909
Printer Set for Dräger Bump Test Station Dräger X-am® 7000
Consisting of: Dräger Bump Test Station, Dräger Mobile Printer, single charger,
rechargeable NiMH batteries, USB connection cable, positioning aid, Dräger CC-Vision
(not including gas cylinder)
83 21 009
Printer Set for Dräger Bump Test Station Dräger X-am® 7000 (same contents as 83 21
009), Complete with one test gas cylinder 58L (gas and concentration variable)
83 21 020
Dräger GasVision
83 14 034
Dräger CC-Vision
Freeware
Dräger X-am® 7000 | 11
Notes
90 44 772 | 15-04-2 | Communications & Sales Marketing | PP | LE | Printed in Germany | Chlorine-free – environmentally compatible | Subject to modifications | © 2015 Drägerwerk AG & Co. KGaA
12 | Dräger X-am® 7000
Notes
CORPORATE HEADQUARTERS
Drägerwerk AG & Co. KGaA
Moislinger Allee 53–55
23558 Lübeck, Germany
www.draeger.com
Manufacturer:
Dräger Safety AG & Co. KGaA
Revalstraße 1
23560 Lübeck, Germany
Locate your Regional
Sales Representative at:
www.draeger.com/contact
REGION EUROPE CENTRAL
AND EUROPE NORTH
REGION MIDDLE EAST, AFRICA
Dräger Safety AG & Co. KGaA
Revalstraße 1
23560 Lübeck, Germany
Tel +49 451 882 0
Fax +49 451 882 2080
info@draeger.com
Dräger Safety AG & Co. KGaA
Branch Office
P.O. Box 505108
Dubai, United Arab Emirates
Tel +971 4 4294 600
Fax +971 4 4294 699
contactuae@draeger.com
REGION EUROPE SOUTH
REGION ASIA PACIFIC
Dräger Safety France SAS
25, rue Georges Besse
92182 Antony Cedex
Tel +33 1 46 11 56 00
Fax +33 1 40 96 97 20
europe.south@draeger.com
Draeger Safety Asia Pte Ltd
25 International Business Park
#04-20/21 German Centre
Singapore 609916
Tel +65 6308 9400
Fax +65 6308 9401
asia.pacific@draeger.com
REGION CENTRAL
AND SOUTH AMERICA
Dräger Panama S. de R.L.
Complejo Business Park,
V tower, 10th floor
Panama City
Tel +507 377 9100
Fax +507 377 9130
contactcsa@draeger.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising