1. Before Installing SMARTASSIST

1. Before Installing SMARTASSIST
Installation Manual
SMARTASSIST-Direct
The pictures in this manual refer to Windows 7 (some to Windows XP).
The contents of this manual may change without prior notice.
Installation Manual
SMARTASSIST-Direct
コードNo.
All Rights Reserved, Copyright
0AYSA-G00200
Contents
Page
1. Before Installing SMARTASSIST-Direct… …………… 1
Head office
Umeda Gate Tower
1-9 Tsurunocho,
kita-ku, Osaka, Japan
2. Installation
Steps…
…………………………………………
2
Phone: 81-6-6376-6237
3. Installing the Software……………………………………… 3
4. Default
Mode……………………………………………………16
Agricultural Machinery & Equipment Division
Quality Assurance Dept.
5. YDS
User ID and Password………………………………18
Umeda Gate Tower 1-9 Tsurunocho, kita-ku, Osaka, Japan
Phone: 81-6-6376-6347
6. Security Check…………………………………………………20
7. USB Driver of the Interface Box…………………………21
Power System Operations Division
Quality Assurance Dept.
1009-2, Kawamichi-cho, Nagahama-city, Shiga, 526-0111, Japan
Phone: 81-749-72-5195
Marine Operations Division
Quality Assurance Dept.
3-1, 5-Chome, Tsukaguchi-honmachi, Amagasaki, Hyogo, 661-0001, Japan
Phone: 81-6-6428-3137
Yanmar Construction Equipment Co., Ltd.
Service Information Section
1717-1, Kumano, Chikugo-shi, Fukuoka, 833-0055, Japan
Phone: 81-942-53-8427
Installation Manual
SMARTASSIST-Direct
Jan 2012: 1st edition
Issued by : YANMAR CO.,LTD. Business System Dept. ICT Dept.
Edited by : YANMAR TECHNICAL SERVICE CO.,LTD.
1. Before Installing SMARTASSIST-Direct
1. Before Installing SMARTASSIST-Direct
„Required items
zz
PC
• CPU:
Intel Pentium 4
• HDD:
200 MB or more recommended *1
• OS *2/Memory:
Windows XP SP3
1 GB recommended
Windows Vista SP2
2 GB recommended
Windows 7 SP1
2 GB recommended
• Display resolution:
1024 x 768 or higher
• USB 1.1 or higher:
1 port
2 GHz or more recommended
*1
Excluding the obtained data accumulation and data storage for the manual link.
*2
Depending on the language setting and the version of the operating system, it might not be possible to use (install) this software.
If you cannot install the software, please contact the YANMAR employee in charge.
zz
Internet connection
• To communicate with the center during installation and perform initial settings
• To download the software
zz
License serial number
• Sent together with the SMARTASSIST-Direct utilization notice via e-mail or postal mail.
YANMAR → YANMAR Regional HQ → Utilization Company
YANMAR → Utilization Company
• Sent to the e-mail address or postal address of the representative noted on the application form. *
* Depending on the circumstances, we may also contact you when a SMARTASSIST-Direct training session is
held.
1
2. Installations Steps
2. Installation Steps
1
Obtaining the software
Save the software to your PC by the method described below or in the separate document "How to obtain the software".
zz
Copy the software from the media (e.g. DVD, CD) that was sent to you.

2
Decompressing the soft- Decompress the compressed software.
ware
* Depending on how you obtained the software, this might not be necessary.
For details, refer to the separate document "How to obtain the software".

3
Installation
Execute the installer and follow the instructions on the screen to install the
software.

4
Initialization
During installation, the software automatically communicates with the center
(SMARTASSIST-Core) and performs the initial information settings associated
with the utilization.

5
User verification
After installation, the login screen appears.
Enter your user ID and password. The user is verified.

Installation complete
2
3. Installing the Software
3. Installing the Software
Confirm the following precautions before installing the software.
zz
Check the PC user privileges
To install the software, it is necessary to have Administrator or Power User privileges.
Remark
This is the same as for other software installations.
zz
Check the Internet connection
To communicate with the center during installation, perform the initialization and make the software available,
the PC must be able to connect to the Internet.
zz
Do not connect the SMARTASSIST-Direct Interface Box (I/F Box) during installation
If the I/F box is connected to the PC during installation, the driver installation will also start and normal installation will not be possible.
1
Double-click the new folder named "YSASSD_SetupJ".
(The example screen below applies if you copied the software to the desktop.)
クリック
Note
3
The English version of the folder is named "YSASSD_Setup".
3. Installing the Software
2
Find the file "Setup.exe" and double-click it.
Note
3
Do not click any other files.
The peripheral software for SMARTASSIST-Direct is installed. Note)
When the screen below is displayed, check "I accept" and then click "Install (I)".
Note
zz
If this type of software is already installed on your PC, the screen may not be displayed.
zz
If you are re-installing SMARTASSIST-Direct, the screen is not displayed.
4
3. Installing the Software
4
Two pieces of peripheral software are installed. Note)
Changes automatically
Note
5
If this type of software is already installed on your PC, the screen may not be displayed.
The installation setup wizard starts.
Click "Next (N)".
5
3. Installing the Software
6
The warning screen for the Internet connection appears.
Click "Next (N)" when your PC is able to connect to the Internet.
Note
7
If the PC is not connected to the Internet, the initialization cannot be completed during installation. The installation finishes in default mode (P.16).
The license terms are displayed.
Confirm the content, click "Agree (A)" and then click "Next (N)".
Note
If you do not click "Agree (A)", the software will not install.
6
3. Installing the Software
8
Enter the install key that was written in the box "Serial Number" on the utilization notice. Then click "Next (N)".
Enter
Note
9
These fields can
be left blank.
The serial number is case-sensitive.
If you enter the wrong serial number, the following warning dialog box appears. Enter the correct serial number
and click "OK".
Clicking CANCEL aborts the installation.
Enter again
7
3. Installing the Software
10The preparation for the installation is complete.
Click "Next (N)".
11The installation starts.
8
3. Installing the Software
12After the installation is completed, click "Close (C)".
The estimated installation time is 5 to 20 minutes, depending on the performance of your PC.
13The login screen for SMARTASSIST-Direct appears.
Enter the user ID and password, and click the "Start" button.
Enter
Note
zz
The user ID and password are the same as those for the YANMAR D SITE (YDS).
(They are case-sensitive.)
zz
In case you forgot your YDS user ID or password, please contact the YANMAR
representative who assigned your YDS ID. The publisher of this manual (YANMAR
Business System Dept., ICT Dept.) cannot offer support.
9
3. Installing the Software
14The initial settings and user settings are completed, and the utilization period is displayed.
Example screen
Remark
After login, you can check the utilization period by selecting "Main Menu" and
"Device Information".
15At the same time, data that is necessary for error diagnosis is updated.
Remark
This data is updated at every login.
Even when the operation is canceled, the data can be updated at the next login.
10
3. Installing the Software
16Depending on the time of installation, the software may automatically update to a newer version.
In that case, the login screen displays again after the update is completed.
Example screen for automatic version update
Remark
If a newer version of the software is released after downloading the installer and
before actually installing the software, the software is automatically updated to
the newest version during installation.
17After successful login to SMARTASSIST-Direct, the "Start Menu" is displayed. Under Windows 7, the installation finishes here.
11
3. Installing the Software
[For operating systems other than Windows 7]
1- Exit the software.
2- Click "FX-SP" in the installer folder.
Remark
Install this add-on software to improve the communication functions of the
operation system.
It is included in Windows 7. (The software is a product of Microsoft.)
12
3. Installing the Software
3- Click "NetFx20SP2_x86.exe" and click "Run".
4- The installation starts.
Note
13
If this software is already installed, the below message is displayed. Click
"OK". The installation is complete.
3. Installing the Software
18After installation, a SMARTASSIST-Direct shortcut icon is created on the desktop. Double-click this shortcut
icon to use the software.
19If you enter your user ID and password incorrectly on the login screen, the following warning dialog box appears.
Note
For details regarding YDS, refer to P.18.
14
3. Installing the Software
20If you installed the software without an active Internet connection, the initialization (user verification) could not
be completed by communicating with the center (SMARTASSIST-Core). A warning dialog box appears.
Note
SMARTASSIST-Direct starts in the default mode (P.16).
21The initialization (user verification) is performed for each user.
After the installation is completed, each user should log into SMARTASSIST-Direct with an active Internet connection. (The initialization is performed automatically.)
User 1
(installs)
Initialization completes at installation
Center
User 2
User 3
15
Each user logs in and
performs initialization
4. Default Mode
4. Default Mode
Only registered users can use the SMARTASSIST-Direct system.
To use the functions of SMARTASSIST-Direct, a utilization limitation release key is obtained from the center.
The utilization limitation is the default mode.
Installation alone
does not enable
the software.
Users registered in advance
User verification
Center
Limitation release
In the default mode, only the automatic communication function
Note)
to the center is enabled. After login, the "Start
Menu" appears, but you cannot select the product category.
Not selectable
Only “Exit”
is clickable
Note
The information upload function is also enabled.
16
4. Default Mode
You can release the default mode very easily.
Exit and re-start the software with an active Internet connection. It automatically connects to the center to obtain the
utilization limitation release key.
Connect the PC in default mode to the Internet.
Start SMARTASSIST-Direct and log in.
After automatically connecting to the center and
sucessful user verification, the limitation release
key is received.
Center
Note
zz
The software automatically communicates with the center prior to displaying the
"Login" screen.
zz
If you activate the Internet connection after the login screen appears, it does not
connect to the center.
„Security check
To manage its users, distribute the latest software and manage the ECU maintenance information correctly,
SMARTASSIST-Direct has a 3-month security check period.
Security check
every 3 months
Center
Extension key
Note
If you do not use SMARTASSIST-Direct with an active Internet connection for an extended period of time, the security check period expires and the system operates in
default mode.
„No release of the default mode
In the following cases, you cannot release the default mode even when communicating with the center.
zz
The contract period for SMARTASSIST-Direct is expired.
zz
Information about the utilization (extension) application is not registered at the center.
zz
The utilization registration is deleted or canceled.
zz
The PC clock is set back excessively (more than 24 hours).
17
5. YDS User ID and Password
5. YDS User ID and Password
1
SMARTASSIST-Direct uses the same user ID and password as the YDS system, but has different characteristics.
YDS will regularly ask you to change your password
Password change request
Change
The YDS login password is
not stored on your PC.
Change is applied
The login password is
stored on your PC.
Connection to center
Center
ー
2
New password information
is sent
After changing the YDS passwordNote), if you do not log in with an active Internet connection, your PC cannot
communicate with the center and apply the new password, so the shared password will differ.
In that case, it is necessary to log into SMARTASSIST-Direct with the old password.
Password change
Change is applied.
Without a connection
to the center,
the change is
not applied to the PC.
Login with the
old password
is necessary.
Center
ー
Note The same applies for a password change for the "My Portal" system.
18
5. YDS User ID and Password
3
The YDS password changeNote) is applied to the SMARTASSIST-Direct center within approximately 1 minute.
After the change, start SMARTASSIST-Direct and log into the system. The password change is applied to your
PC.
(This method requires some extra effort, but it is the most reliable method.)
Password change
Password is applied
(approx. 1 min.)
Connect to center
Center
New password is applied
Please start SMARTASSIST-Direct and log in.
The password is applied before the login screen appears.
Note The same applies for a password change for the "My Portal" system.
19
6. Security Check
6. Security Check
A grace period of 7 days applies to users who have not used SMARTASSIST-Direct for a long period of time in disregard of the security check period.
X: Warning period before security check/usage limit expires (30 days)
Y: Grace period after security check/usage limit expired (7 days)
Z: Period between security checks/usage limit (90 days)
Default
mode
X
Z
Y
No connection
to center
Usage limit expires
Last connection
to center
First usage
after a missed
security check
License Period Management Schema
Remark
zz
The security check is performed for each PC.
zz
If one PC is used by multiple users and one user connects the PC to the center,
the last connection date is updated.
Not all users need to connect to the center
One user connects
Security check day is updated
Center
20
7. USB Driver of the Interface Box
7. USB Driver of the Interface Box
When you plug the powered interface box Note) into the USB port of your PC, the driver set-up wizard starts automatically.
Note
zz
The interface box is supplied with power (for example, connected to the product
with the key switch turned on).
zz
The PC does not supply power to the interface box.
Depending on the version of Windows, the setup wizard may not start and the driver may be installed automatically.
(The example screen is for Windows 7.)
Depending on the specifications and settings of your PC, the USB driver may not install automatically.
In such a case, manually install the driver from the PC start menu.
21
7. USB Driver of the Interface Box
„Warning Dialog Box during Driver Installation
The following warning dialog box may appear during installation, but click "Continue (C)".
Hardware Installation
The software you are installing for this hardware:
USB Driver for PC Diagnosis System
has not passed Windows Logo testing to verify its compatibility
with Windows XP. (Tell me why this testing is important.)
Continuing your installation of this software may impair
or destabilize the correct operation of your system
either immediately or in the future. Microsoft strongly
recommends that you stop this installation now and
contact the hardware vendor for software that has
passed Windows Logo testing.
Continue
Stop Installation
zz
This warning appears because the driver is not certified by Microsoft. The manufacturer of the interface box has
confirmed that it does not affect the machine or other systems.
zz
Whether a warning appears depends on the operating system.
Windows 7, XP, Vista : Warning may appear*
Windows 2000
: Warning does not appear
* This depends on the Windows settings.
22
The pictures in this manual refer to Windows 7 (some to Windows XP).
The contents of this manual may change without prior notice.
Installation Manual
SMARTASSIST-Direct
コードNo.
All Rights Reserved, Copyright
0AYSA-G00200
Head office
Umeda Gate Tower 1-9 Tsurunocho, kita-ku, Osaka, Japan
Phone: 81-6-6376-6237
Agricultural Machinery & Equipment Division
Quality Assurance Dept.
Umeda Gate Tower 1-9 Tsurunocho, kita-ku, Osaka, Japan
Phone: 81-6-6376-6347
Power System Operations Division
Quality Assurance Dept.
1009-2, Kawamichi-cho, Nagahama-city, Shiga, 526-0111, Japan
Phone: 81-749-72-5195
Marine Operations Division
Quality Assurance Dept.
3-1, 5-Chome, Tsukaguchi-honmachi, Amagasaki, Hyogo, 661-0001, Japan
Phone: 81-6-6428-3137
Yanmar Construction Equipment Co., Ltd.
Service Information Section
1717-1, Kumano, Chikugo-shi, Fukuoka, 833-0055, Japan
Phone: 81-942-53-8427
Installation Manual
SMARTASSIST-Direct
Jan 2012: 1st edition
Issued by : YANMAR CO.,LTD. Business System Dept. ICT Dept.
Edited by : YANMAR TECHNICAL SERVICE CO.,LTD.
SMARTASSIST-Direct
http://www.yanmar.co.jp
0AYSA-G00200
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising