HYDRIM C51wd

HYDRIM C51wd
HYDRIM
C51wd
The Hydrim C51wd Washer Disinfector.
Perfectly prepares instruments
for sterilisation in as little as 19 minutes.
Safer for your staff,
kinder to your instruments.
HYDRIM WASHER DISINFECTOR
If it isn’t clean? It can’t be sterilised!
Authorities now recommend that dental instruments must first be
processed in a mechanical washer or washer-disinfector prior to
sterilisation. Across Europe, standards and guidelines (EN15883 / RKI /
BDA Advice Sheet A12) reflect this advice.
Effective sterilisation begins with the Hydrim® C51wd washer disinfector
which automatically washes, rinses, disinfects and dries dental
instruments, simply by pressing the icons on the touch screen.
The Hydrim process begins with a powerful pre-wash cycle.
Then two independent, high-pressure sprays clean the
instrument load from above and below removing virtually all
organic debris. Cleaning solution is dispensed automatically and
clean water is used with every new cycle. Independent tests show the Hydrim to have
a protein removal efficacy of 99.9 – 100 per cent.
gie
ne gui
EN
lines •
BDA
A12
de
Hydrim washer disinfectors are designed and manufactured by SciCan®, the creators of Statim
Cassette Autoclaves®, and are the result of years of expertise and experience in decontamination and
sterilisation processes.
• RKI Hy
The Hydrim has been designed in accordance with the relevant sections of EN15883, the new European
standard for washer disinfectors and the UK guidelines HTM2030.
15883
Safer for your staff
Integrating mechanical washing into the practice decontamination protocol provides a high level of safety, particularly against
the risk of skin puncture injuries which occur during the hand washing, rinsing and patting dry of contaminated instruments.
Hydrim eliminates the soaking, scrubbing and rinsing associated with traditional pre-sterilisation processes. Disinfection at 80ºC
for ten minutes following the washing phase renders the instruments safer to handle.
The chemicals in ultrasonic baths are typically changed once per day. Microbial load builds throughout the day and
instruments are often cleaned for variable periods of time. In contrast, mechanical washing in the Hydrim is more efficient than
an ultrasonic bath because Hydrim is consistent, more powerful and uses only single-use water and detergent chemicals.
Kinder to your instruments
Hydrim Cleaning Solution with instrument protection (HIP) has been
formulated to achieve excellent cleaning results while assuring
exceptional compatibility with a wide range of metals and coatings
used in dental instruments. Your valuable instruments will be
protected better and for longer by the HIP formulation.
Scican’s patented HIP cleaning solution, combined with Hydrim’s
specially designed wash programme, provides a superior washing
system which perfectly prepares your instruments for sterilisation with
a Statim, Quantim® or other sterilising process.
SAFER
FOR YOUR
STAFF
2
HYDRIM WASHER DISINFECTOR
TM
How HIP works to protect your Instruments
To ensure the effectiveness of cleaning and protection of the instrument during processing, all non-organic materials with
setting properties should be removed at chairside while still in their 'wet' state. Materials such as composites, cements
and similar materials cannot be removed by mechanical washing, or ultrasonic cleaning once they have set.
HIP has been carefully formulated to provide outstanding compatibility with a wide range of materials and coatings.
However, some manufacturers’ instruments may not be compatible. After prolonged use in Hydrim, anodised (ethoxylated)
aluminium will show cosmetic changes.
To be effective, HIP relies on constant contact with the instrument during all the washing and rinsing phases. During processing,
therefore, it is automatically added to the various stages of the process as follows:
• A small amount is dosed, with the water, in
Prewash <45ºC
the pre-wash portion of the chosen cycle.
Exposed portions of the instruments are
therefore instantly protected. As organic matter
is removed from the instrument during the
cycle, newly exposed areas of the instrument
become protected as they are exposed.
• The main dose of HIP is dispensed during the
Wash 50ºC
main hot wash portion of the cycle where it
then continuously removes the more stubborn
organic materials and continues to protect the
instruments.
• Finally, a further small amount of HIP is dosed
Rinse/Disinfect
60-80ºC
in with the rinse or disinfect portion of the cycle
to ensure continuing protection at all times that
the instruments are exposed to water.
• During the drying cycle, as the water is
Dry
evaporating from the instruments, HIP protects
the instruments from corrosion in the moist,
oxygen-rich chamber.
Liquid chemical dosing system
The HIP solution is kinder to your instruments and to the Hydrim unit itself, as the liquid detergent rapidly and fully
disperses, unlike powder detergent which can form clumps and compromise the efficiency of the washing process.
HIP is very accurately dosed by a peristaltic pump. The amount of chemical and the temperature at which is it dosed are
controlled by SciCan’s patented, advanced software.
A dosing reservoir ensures that there is sufficient chemical to complete the cycle. If there is insufficient chemical, the
Hydrim will not start.
3
Built-in dryer
Drying of instruments after cleaning, and before wrapping, is recommended by major instrument
manufacturers to prevent corrosion . The Hydrim C51wd has an active drying system that circulates
warm air throughout the chamber following the cycle. A built-in dryer with Hepa filter (user
changeable) ensures that instruments are dried with air free of contaminants. Since instruments are
already warm due to the elevated temperature during disinfection, they dry in less than 10 minutes.
The drying time can be extended or reduced if desired.
The drying cycle of the Hydrim eliminates the need for practice staff to pat instruments dry, as they
would usually do following manual scrubbing or processing in an ultrasonic cleaner. This further
reduces the risk of staff injury, and saves valuable time.
Water efficiency
The low water consumption of the Hydrim C51wd, only 13 litres per cycle,
in combination with the short cycle times makes the Hydrim C51wd one
of the most energy efficient units on the market.
Record keeping
A choice of datalogger or printer is available to keep full process records to meet
the documentation needs of the practice.
Datalogger
Printer
A datalogger, designed for use with the Hydrim
C51wd, is available as an optional accessory. It
connects into an RS232 9 pin port and automatically
captures the parameters of the cleaning and
disinfection cycles within a text file on a USB stick.
Afterwards these files can be saved from the USB stick
onto the mainframe computer in the practice.
The RS232 9 pin port
offers the user the option
to connect the Hydrim
C51wd to a selection of
standard printers.
Independent monitoring
Complying with the requirements of EN15883, the Hydrim C51wd offers
independent monitoring of temperature, pump pressure and cleaning solution
flow resulting in error codes when problems occur.
Validation
The three standard cycles on the Hydrim C51wd have been validated to
ensure repeatable washing and/or disinfection performance.
Flexible configurations
Whether instruments are placed in cassettes or trays, or
processed loose in baskets, Hydrim can be easily configured to
meet the practice requirements. As a guide the Hydrim C51wd
can process about 40 instrument sets in an 8 hour day.
4
HYDRIM WASHER DISINFECTOR
ACTIVE
DRYING
SYSTEM
Hydrim C51wd Cycles
Cycle
P1
Regular Cycle
P2
Heavy Duty Cycle
P3
Heavy Duty Cycle
with Disinfection
Description
Use for moderately
soiled loose instruments
Use for heavily soiled
instruments and cassettes
Use for heavily soiled
instruments and cassettes
Cold pre-wash
<45ºC
<45ºC
<45ºC
Wash
50ºC
5 minutes
50ºC
9 minutes
50ºC
9 minutes
Rinse/disinfection
60ºC
60ºC
80ºC 10 minutes
Dry
0-15 min.
0-15 min.
0-15 min.
Total time*
without drying
19 minutes
23 minutes
45 minutes
Water
consumption
13L
13L
13L
* Cycle times depend on the temperature and pressure of incoming water
Accessories
Hinged instrument rack
15793.00
192 x 100 x 109 mm
Large basket
01-108210
442 x 150 x 42 mm
Basket with hinged lid
01-108294
216 x 140 x 54 mm
Hygiene basket
01-108298
203 x 114 x 32 mm
Statim 2000 basket
01-107240
275 x 178 x 42 mm
Statim 5000 basket
01-107241
373 x 178 x 42mm
Support rack
01-108214
350 x 350 x 48 mm
HIP cleaning solution
CS-HIPC
4 x 1.9L
01-109153
4-cassette rack
380 x 385 x 160mm
1-cassette rack
01-107242
388 x 156 x 160 mm
Rack for Vertical Instruments
15555.00/01
Rack for two cassettes
and two baskets
01-109768S
SYS-TM Instrument Cassettes Medical basket with
SYS-TM1 – 178 x 64 x 13 mm
handles, B
SYS-TM2 – 178 x 64 x 25 mm
01-108262S
Medical basket with
handles, C
01-108263S
SYS-TM3 – 178 x 114 x 13 mm
SYS-TM4B – 267 x 165 x 25 mm
5
Easy to install
The compact Hydrim C51wd can be installed on a benchtop with no
changes to the cabinetry since the integrated liquid chemical requires no
additional space. Alternatively, the Hydrim C51wd can be installed under
the counter or on a sliding shelf to permit easy access for air filter change
and maintenance. It requires standard utilities – 220-240V, 50Hz outlet,
hot and cold water inlets and a drain.
The unit is supplied with one hot water and one cold
water hose which are 1.9 m long with 2 cm / 3/4"
female fittings. The drain tube provided with the unit
is 1.5 m long with an inner diameter of 2 cm / 3/4".
A water pressure of 1 - 10 bar is required.
5 mm
m+7
475 mm + 75 mm
460 m
600 mm +
150 mm
sliding
sliding shelf
shelf
mm
+ 75
600 mm
mm
+ 150 m
The drain tube should be connected
to a drain point no more than 35cm
above the floor.
In case extension is needed, please
note that the drain tube should not
exceed 3.3 m.
6
475 mm + 75 mm
460
HYDRIM WASHER DISINFECTOR
m
Hydrim Technical Specifications
C51wd
Overall product width
600 mm
Overall product height
475 mm
Overall product length
460 mm
Length with door open
780 mm
Unpacked weight
35kg (max)
Water softener
Standard
Running noise
60dB (A)
Drying system
Heater 1kW with Blower
Hot and cold water connections
G 3/4 19 mm
Drain
3
Inlet water pressure
1-10 bar
Electrical connections
220-240V, 50Hz, 10 amp
Independent second temperature sensor
Standard
Independent monitoring of chemical dosing
Standard
Independent monitoring of circulation pumps
Standard
RS 232 data port
Standard
Test port
Standard
/4 19 mm
The right is reserved to change the specifications and prices of the models and items illustrated and described in this brochure at any time.
7
Statim 2000S
Statim 5000S
Quantim B2
Hydrim C51wd
Hydrim M2*
Aquastat
Aseptim**
The SciCan range of products
• Statim® 2000S cassette autoclave • Statim 5000S cassette autoclave
• Quantim B2 vacuum autoclave • Hydrim® C51wd washer disinfector • Hydrim M2 washer disinfector
TM
• Aquastat water distillation unit • Aseptim unit
TM
TM
Office for EU member countries:
SciCan products
BHT Hygienetechnik GmbH
Messerschmittstrasse 11
D - 86368 Gersthofen, Germany
Tel: +49 (0) 821 27893 400
Fax: +49 (0) 821 27893 401
Office for Swiss customers only:
SciCan Medtech AG
Alpenstrasse 16
6300 ZUG, Switzerland
Phone: +41 (0) 41 727 7027
Fax:
+41 (0) 41 727 7029
www.scican.com
SciCan Ltd, 1440 Don Mills Road, Toronto, Ontario
Canada M3B 3P9
Phone (416) 445-1600 Fax (416) 445-2727
0 1 2 3 International fax (416) 446-2734
* CE0297
**CE1275
SciCan®, Statim® and Hydrim® are registered trademarks and QuantimTM, AquastatTM, AseptimTM and HIPTM are trademarks of SciCan® Ltd.
SD226/3-E 04/07 Scope
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising