HP Integrity BL860c Server Blade

HP Integrity BL860c Server Blade
QuickSpecs
HP Integrity BL860c Server Blade
Overview
1. Three Mezzanine slots
2. Up to two Intel® Itanium® 9000 and 9100 series
processors
3. Local I/O connector
4. Two small form factor (SFF) hot-plug drive bays
5. Up to 48 GB PC2-4200, DDR2 memory (12 DIMMs)
What's New
Support for Intel Itanium 9100 series processors
HP-UX 11i v3 supported now with new HP Integrity iLO Power Regulator for HP-UX 11i v3
Support for OpenVMS v8.3 or OpenVMS v8.3-1H1
Support for the HP NC364m Quad Port 1GbE BL-c Adapter allowing up to sixteen Gigabit Ethernet ports per server
At A Glance
This document covers the HP Integrity BL860c server blade only. For more information on HP BladeSystem c-Class
Infrastructure and HP BladeSystem c-Class Interconnects, please see the following QuickSpecs:
HP BladeSystem c-Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12517_div/12517_div.html
HP BladeSystem c-Class Interconnect Components QuickSpecs:
ttp://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
The HP Integrity BL860c delivers the performance, reliability, and availability on 64-bit operating systems for the
ultimate in scalability and flexibility in deployment: HP-UX 11i v3/v2, 64-bit versions of Red Hat and SUSE Linux
Windows® Server 2003 (Enterprise and Datacenter editions), and OpenVMS v8.3. To further enrich your costefficient, consolidated Integrity blade infrastructure, HP Virtual Server Environment (VSE) can help with solution
components such as HP Integrity Virtual Machines, HP Integrity Essentials Capacity Advisor and Virtualization
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 1
QuickSpecs
HP Integrity BL860c Server Blade
Overview
Manager, HP-UX Workload Manager, HP VSE Reference Architectures, and HP Serviceguard.
Processor:
Up to two Intel Itanium™ 2 9100 or 9000 Series processors
Memory:
Up to 48 GB of memory. Supporting (12) DDR2-533 ECC memory DIMMS
Storage Controller:
Embedded LSI 1068 SAS RAID Controller integrated on system board
Standard RAID 1 controller
Internal Drive Support:
Supports up to (2) two small form factor (SFF) SAS hot plug hard drives
Network Controller:
Four (4) Embedded Standard Gigabit NICs
Plus one (1) additional 10/100 NIC dedicated to Integrity iLO 2 Management
Mezzanine Support:
Three (3) additional I/O expansion slots via mezzanine cards.
Supports up to (3) mezzanine cards
Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (QLogic).
4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity
NOTE: For Linux support See the HPC Cluster Platform 6000 at: http://www.hp.com/go/hptc
HP NC364m Quad Port 1GbE BL-c Adapter allowing up to sixteen Gigabit Ethernet ports per server
HP PCIe Pass Thru for support of BLc SB40c Storage Blade
NOTE: For SB40c information see:
http://h18004.www1.hp.com/products/servers/storageworks/c-class/sb40c/index.html
Internal USB Support:
No internal USB port on the BL860c
Management:
HP Integrity Server Blades Management Software
Integrity Integrated Lights Out 2 (iLO 2) management processor
HP Integrity Integrated Light Out 2 (iLO 2) with Advanced Pack,(factory integrated - standard with all
BL860c models)
HP Integrity Essentials, www.hp.com/go/integrityessentials
HP System Insight Manager
HP System Management Homepage
HP-UX 11i Management Software for Integrity Blades, www.hp.com/go/hpuxblades
HP Ignite-UX
HP-UX Software Assistant (SWA)
HP BladeSystem Infrastructure Management Software:
HP BladeSystem Integrated Manager in HP SIM
HP Insight Control Environment for BladeSystem
HP BladeSystem c-Class Onboard Administrator
HP BladeSystem c-Class Virtual Connect
Enterprise Management Software
Data Protector Software
GlancePlus Pak
Performance Manager and Agent
Virtualization with HP Virtual Server Environment, www.hp.com/go/vse
Intelligent Control
HP Integrity Essentials Capacity Advisor
HP Integrity Essentials Virtualization Manager
HP-UX Workload Manager
HP Systems Insight Manager
Partitioning Continuum
HP Integrity Virtual Machines (with HP-UX guest OS's and Windows Guest OS's)
HP Process Resource Manager/pSets
Secure Resource Partitions
Continuous availability
HP Serviceguard for HP-UX 11i
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 2
QuickSpecs
HP Integrity BL860c Server Blade
Overview
HP Serviceguard Extensions for SAP
HP Serviceguard Extensions for Faster Failover
VSE Reference Architectures
VSE Suites including HP Integrity Essentials Capacity Advisor, HP Integrity Essentials Virtualization
Manager, HP-UX Workload Manager, HP Integrity Virtual Machines, and VSE Reference Architectures
Form Factor:
HP Integrity BL860c server blade is a full-height, BladeSystem c-Class form factor. The BL860c server blade
plugs into the BladeSystem enclosure. In the c7000 enclosure, 8 server blades are supported per 10U
enclosure. 4 enclosures can be configured to a standard 42U rack; 32 BL860c server blades can be configured
in a fully populated rack.
Warranty:
Protected by HP Services and a worldwide network of HP Authorized Channel Partners. Three-year parts, 3
Year Labor and 3 Year on-site limited global warranty. Certain restrictions and exclusions apply
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 3
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features (Server Blade)
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-0071ENW.pdf
Processor
Intel® Itanium® Single-Core Processors Model 9110N (1.6 GHz, 12MB L3 cache, FSB533)
Intel® Itanium® Dual-Core Processors Model 9140M (1.67 GHz, 18MB L3 cache, FSB533)
Intel® Itanium® Dual-Core Processors Model 9120N (1.4 GHz, 12MB L3 cache, FSB533)
Intel® Itanium® Dual-Core Processor Model 9040 (1.6 GHz, 18MB L3 cache, FSB533)
Intel® Itanium® Dual-Core Processor Model 9015 (1.4 GHz, 12MB L3 cache, FSB400)
Intel® Itanium® Single-Core Processor Model 9010 (1.6 GHz, 6MB L3 cache, FSB533)
Upgradeability
Upgradeable to two (2) processors
NOTE: The HP Integrity BL860c only supports 1 or 2 processor configurations. Processors must
be identical
Cache Memory
1.2MB per Core Level 2 cache memory
Chipset
HP zx2
Memory
Type
PC2-4200 DDR2 DIMMs (DDR2-533)
Minimum
2 GB (2 x 1 GB)
Maximum
48 GB (12 x 4 GB)
NOTE: Memory modules are DIMM pairs.
NOTE: Double Chip Spare is enabled in a single memory module. Double Chip Spare requires
identical DIMM types and capacities
Network Adapter
Four (4) embedded NIC ports, plus one (1) additional management NIC port:
Four (4) NIC ports via (2) Broadcom 5704 Dual Port Gigabit NIC
One (1) additional 10/100 NIC dedicated to Integrity iLO 2 Management
Up to twelve additional Gigabit Ethernet ports via the NC364m Quad-port mezzanine adapter
Expansion Slots
Three Mezzanine slots (two (2) Type II PCIe, one (1) Type I PCIe x4)
Integrated
Manageability
Integrity Integrated Lights-Out 2 (iLO 2) Advanced Pack (Factory integrated)
HP BladeSystem c-Class Onboard Administrator
HP BladeSystem c-Class Virtual Connect
Storage Controller
LSI 1068 SAS Controller 2 SAS Channels (one to each HDD)
Supports RAID 1
Maximum Internal
Storage
Hot Plug Serial Attach
SCSI (SAS)
Graphics
Integrated ATI RN-50 1280 x 1024 x 16M color (32 MB DDR memory)
292GB SAS
2 x 146GB Serial Attached SCSI
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 4
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features (Server Blade)
Graphics Resolution
Supported
Resolution Color Depths Depths 1280 x 1024, 16.7M , 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Fiber Channel on the
HP Integrity BL860c
server blade
Optional Fibre Channel HBAs are supported by the HP Integrity BL860c. The mezzanine circuit
board connects directly to the server blade system board.
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem (403619-B21)
Uses common drivers which means that customers can standardize on one QLogic driver
whether they are using the QMH2462 or other 4Gb and 2Gb HBAs powered by QLogic
QLogic Fibre Channel HBAs feature
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP StorageWorks and supported by third party SAN vendors
Support for HP-UX, Microsoft® Windows® OpenVMS, and Linux operating systems
environments
Compatible SAN
HP Integrity BL860c server blades are optimized for HP StorageWorks MSA, EVA, and XP
HP Integrity BL860c server blades are compatible with select third party SANs (please see blade
storage page for more details: http://h18000.www1.hp.com/products/servers/proliant-bl/cClass/storage.html)
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 5
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Integrity Server
Blades Management
Software and HP
Integrity Essentials
Software Plug-ins
HP-UX 11i Management
Software for HP Integrity
BL860c Server Blade
and HP BladeSystem
Getting Started
HP Systems Insight Manager
HP Integrity Essentials for HP-UX 11i
HP-UX 11i System Management
HP BladeSystem Integrated Manager in HP System Insight
Manager
HP Onboard Administrator
HP BladeSystem c-Class Onboard Administrator Firmware
HP BladySystem c-Class Virtual Connect Firmware
HP Insight Control Environment for BladeSystem
Deploy
HP Ignite-UX
Software Distributor-UX
Software Package Builder
Monitor
HP Systems Insight Manager
HP System Management Homepage
Glance Plus Pak*
Performance Manager and Agent
HP Serviceguard Manager
Control
HP Integrity Integrated Lights Out (iLO) 2 (Advanced Pack
factory integrated with BL860c)
HP Integrity iLO Power Regulator for HP-UX 11i v3*
Protect
HP-UX Bastille
Secure Resource Partitions
Data Protector Software
Software Assistant (SWA)
Security Patch Check and Patch Assessment Tool
Optimize
HP Integrity Essentials Capacity Advisory
HP Integrity Essentials Virtualization Manager
HP-UX Workload Manager
Process Resource Manager
HP Insight Power Manager
Integrate
HP Business Technology Optimization
IT Management Software
HP Virtual Server Environment Suite for HP-UX 11i for HP
Integrity server blades
Learn More
HP-UX 11i on Integrity Server Blade
*NOTE: Fee based software products which aren't bundled with the HPUX 11i v3/v2 Foundation OE. GlancePlus Pak and the Performance
Agent are bundled with the HP-UX 11i v3/v2 Enterprise OE.
Microsoft ®Windows for
Get Started
Integrity Management
HP Systems Insight Manager
Software for HP Integrity
HP Integrity Essentials for Windows
BL860c Server Blade
HP BladeSystem Integrated Manager in HP Systems Insight
and HP BladeSystem
Manager
HP Onboard Administrator
HP BladeSystem c-Class Onboard Administrator Firmware
HP BladeSystem c-Class Virtual Connect Firmware
HP Insight Control Environment for BladeSystem
Deploy
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 6
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Linux for Integrity
Management Software
for HP Integrity BL860c
Server Blade and HP
BladeSystem
Integrity Essentials Foundation Pack for Windows
Smart Setup CD
Smart Setup Scripting Toolkit
Rapid Deployment Pack
Monitor
HP Systems Insight Manager
HP System Management Homepage
GlancePlus Pak
Performance Manager and Agent
Version Control
Repository Manager
NIC Configuration Utility
Performance Management Pack
Control
HP Integrity Integrated Lights Out (iLO) 2 (Advanced Pack
factory integrated with BL860c)
Protect
Data Protector Software
Optimize
HP Integrity Essentials Capacity Advisor
HP Integrity Essentials Virtualization Manager
HP Insight Power Manager
Integrate
HP Business Technology Optimization
IT Management Software
SMS Inventory Tool for HP ProLiant and Integrity Update
HP Management Packs for Microsoft Operations Manager
2005
HP Management Packs for Microsoft Operations Manager
2007
Learn More
Windows for Integrity
Get Started
HP Systems Insight Manager
HP Integrity Essentials for Linux
HP BladeSystem Integrated Manager in HP Systems Insight
Manager
HP Onboard Administrator
HP BladeSystem c-Class Onboard Administrator Firmware
HP BladeSystem c-Class Virtual Connect Firmware
HP Insight Control Environment for BladeSystem
Deploy
HP Integrity Essentials Foundation Pack for Linux
Rapid Deployment Pack
Monitor
HP Systems Insight Manager
HP System Management Homepage
GlancePlus Pak
Performance Manager and Agent
HP Serviceguard Manager
Control
HP Integrity Integrated Lights Out (iLO) 2 (Advanced Pack
factory integrated with BL860c)
Protect
Data Protector Software
Optimize
HP Integrity Essentials Capacity Advisor
HP Integrity Essentials Virtualization Manager
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 7
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
OpenVMS Management
Software for HP Integrity
BL860c Server Blade
and HP BladeSystem
HP Insight Power Manager
Integrate
HP Business Technology Optimization
IT Management Software
Learn More
Linux for Integrity
Get Started
HP Systems Insight Manager
HP Integrity Essentials for OpenVMS
HP BladeSystem Integrated Manager in HP Systems Insight
Manager
HP Onboard Administrator
HP BladeSystem c-Class Onboard Administrator Firmware
HP BladeSystem c-Class Virtual Connect Firmware
HP Insight Control Environment for BladeSystem
Deploy
PCSI and Secure Delivery
Monitor
HP Systems Insight Manager
HP System Management Homepage
GlancePlus Pak
Performance Manager and Agent
Availability Manager
Control
HP Integrity Integrated Lights Out (iLO) 2 (Advanced Pack
factory integrated with BL860c)
Protect
Data Protector Software
Optimize
HP Integrity Essentials Capacity Advisor
HP Integrity Essentials Virtualization Manager
HP Insight Power Manager
Integrate
HP Business Technology Optimization
IT Management Software
Learn More
OpenVMS for Integrity
Glossary of Integrity
HP BladeSystem
Server Blades
Integrated Manager in
Management Software HP Systems Insight
Product Description
Manager
The HP BladeSystem Integrated Manager is a component in HP
Systems Insight Manager (SIM) that provides streamlined management
for the entire HP BladeSystem product family. The HP BladeSystem
Integrated Manager enables users to quickly navigate their HP blade
environments including blade servers, enclosure infrastructures, racks,
and integrated switches, via automatically generated blade rack picture
views and hierarchical trees. Users are able to conveniently configure,
deploy, and manage individual or groups of blade systems. Additionally,
users are able to quickly set up logical collections of blade systems for
convenient management and control.
HP Blades Visualization Used by System Administrators to identify, associate and group blades
into collections, using tables, trees, and picture views, and it can also
be used to monitor performance and launch Integrity Essentials.
NOTE: For more information about Manageability solutions for Integrity
Servers go to http://www.hp.com/go/integrityessentials
HP GlancePlus Pak
HP GlancePlus Pak provides you with a single product for managing a
system's availability and performance. It is an integrated product that
includes HP GlancePlus and HP OpenView Performance Agent. As an
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 8
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
integrated product, the GlancePlus Pak includes the real-time
diagnostic capabilities of GlancePlus and the historical data collection
capabilities of the Performance Agent. The performance agent is used
with other availability and performance management products, thus
providing an integrated real-time and historical performance
management solution.
HP Ignite-UX
HP Ignite-UX is a free toolset that enables a network install of HP-UX
for HP-UX Deployments onto multiple PA-RISC and/or Integrity servers on a network. It can also
be used to create custom install configurations, or golden images,
recover systems remotely, create custom recovery media including
tape, CD and DVD, and manage and monitor multiple client installation
sessions
HP Integrity Essentials HP Integrity Essentials Capacity Advisor is the industry's first
Capacity Advisor
lightweight, integrated tool for ongoing capacity planning, simulating
placement of application workloads to help IT administrators improve
server utilization. Capacity Advisor provides planning capability for the
intelligent control of the HP Virtual Server Environment.
HP Integrity Essentials The HP Integrity Essentials Foundation Pack for Linux contains
Foundation Pack for
software designed to simplify the installation, configuration, and
Linux
management of Linux on HP Integrity Servers with Linux in a Data
Center. HPIEFPL simplifies tasks including system and disk partitioning
as well as prepares your system for installing either the RHEL or SLES
distribution.
The Smart Setup application is a bootable media that HP recommends
to be used prior to installing the operating system distribution. This
application media contains the latest documentation, firmware, and
tools to help configure and optimize your system. Smart Setup provides
the following: a system hardware inventory tool, tools to help configure
system internal storage arrays and adapters, installation of the
hardware diagnostics tools, and tools to launch the appropriate Red Hat
or Novell distribution installer.
The Support Pack component of HPIEFPL includes HP value added
software that can be used to either integrate with existing system
management solutions or directly manage an HP Integrity server.
Following the installation of the Linux distribution of choice, use the
Management media to install additional tools, HP Insight Management
Agents, HP WBEM providers, and System Management Homepage
(SMH).
HP Integrity Essentials
Virtualization Manager
HP Integrity Integrated
Lights Out (iLO) 2
HP System Insight Manager
HP Insight Manager Agents
HP System Management Homepage
Web-based Enterprise Management (WBEM) Solutions
HP Management Base for Integrity Servers
OpenPegasus
HP Array Configuration Utility
HP Integrity Essentials Virtualization Manager is easy-to-use
virtualization management software that reduces complexity by
providing unified visualization and management of physical and virtual
servers. Virtualization Manager provides a central point of control that
allows you to manage all the resources in your Virtual Server
Environment (VSE). It is a powerful way to connect IT resources to real
business needs.
HP Integrity Integrated Lights Out (iLO) management processors make
it simpler, faster, and less costly to remotely manage your Integrity
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 9
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
(Advanced Pack factory servers. HP Integrity iLO 2, the next generation of iLO management
integrated with BL860c) processors, is available in the newest Integrity entry-class servers.
Integrity iLO 2 enables a complete remote console experience with the
addition of Virtual Media and Integrated Remote Console (virtual
keyboard, video, and mouse).
HP Onboard
The Onboard Administrator for the HP BladeSystem c7000 enclosure is
Administrator
the brains of the new c-Class infrastructure. Together with the
enclosure's HP Insight Display, the Onboard Administrator has been
designed for both local and remote administration of HP BladeSystem cClass. This module and its firmware provides:
Wizards for simple, fast setup and configuration
Highly available and secure access to the HP BladeSystem
infrastructure
Security roles for server, network, and storage administrators
Automated power and cooling of the HP BladeSystem
infrastructure
Agent-less device health and status
Thermal Logic power and cooling information and control
HP Serviceguard
HP Serviceguard Manager is a graphical user interface (GUI) that
Manager
provides configuration, administration, and monitoring capabilities for
Serviceguard, Serviceguard Extension for RAC, Metrocluster, and
Continentalclusters. Using Serviceguard Manager, operators see colorcoded icons that provide a big-picture view of multiple clusters. From
this big-picture view, operators can drill down and proactively manage
clusters, systems (nodes), and packages that run applications.
HP Systems Insight
HP Systems Insight Manager (HP SIM) provides a unified, secure and
Manager
extensible environment to centrally manage servers, storage and other
infrastructure devices across multiple operating system platforms.
HP System Management HP System Management Homepage is a web-based interface that
Homepage
consolidates and simplifies the management of individual ProLiant and
Integrity servers running Microsoft Windows or Linux operating systems,
or HP 9000 and HP Integrity servers running HP-UX 11i. By aggregating
data from HP Insight Management Agents and other management tools,
the System Management Homepage provides a secure and intuitive
interface to review in-depth hardware configuration and status data,
performance metrics, system thresholds and software version control
information. The System Management Homepage can also be used to
access the HP Lights-Out Management processor on ProLiant and
Integrity servers.
HP Virtual Server
HP Virtual Server Environment (VSE) for HP Integrity servers and
Environment for HP
blades provides an automated infrastructure that can adapt in seconds
Integrity
with mission-critical reliability. HP VSE allows you to optimize server
utilization in real time by creating virtual servers that can automatically
grow and shrink based on business priorities and service-level
objectives.
HP-UX Software
HP-UX Software Assistant (SWA) is a command-line based tool that
Assistant (SWA)
consolidates and simplifies patch management and security bulletin
management on HP-UX systems. The SWA tool is new for HP-UX
releases as of January 2007, includes Security Patch Check (SPC), and
is the HP-recommended utility to use to maintain currency with HPpublished security bulletins for HP-UX software.
HP-UX Workload
HP-UX Workload Manager (HP-UX WLM) is a resource management
Manager
tool that provides automatic CPU resource allocation and application
performance management based on your service-level objectives
(SLOs) and business priorities. WLM is most effective managing
applications that are CPU-bound. It automatically adapts system or
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 10
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Insight Management
Agents
partition CPU resources (cores) to the demands, SLOs, and priorities of
the running applications. (A core is the actual data processing engine
within a processor, where a single processor can have multiple cores,
and a core can support multiple execution threads through HyperThreading, introduced with HP-UX 11i v3, as discussed below.) It
adjusts the CPU allocation of a group of processes known as a
workload, basing adjustment on the current needs and performance of
the applications in that workload.
Insight Management Agents should be installed on all HP servers to
present system instrumentation, health and configuration information
into HP Systems Insight Manager and the HP System Management
Homepage. The HP System Management Homepage aggregates
systems data from Insight Management Agents and other HP
management tools, providing a consolidated browser-based interface
for managing individual servers.
The HP System Management Homepage (SMH) and OS
instrumentation (WBEM providers) to support management tools such
as SMH and HP SIM are included in the HP-UX Operating
Environments
Insight Management Agents and The HP System Management
Homepage are included on ProLiant Support Packs, and can also be
installed using the server profiles provided with the ProLiant Essentials
Rapid Deployment Pack
Performance Manager
and Agent
Process Resource
Manager
ProLiant Essentials
Performance
Management Pack
(Windows for HP
Integrity Server Blades
only)
For additional information about the Management Agents and the HP
System Management Homepage please visit the management Web site
at http://www.hp.com/servers/manage.
HP Performance Manager, Agents, and Monitor combine to provide a
powerful and flexible distributed management solution. This solution is a
single interface for centrally monitoring, analyzing, and forecasting
resource utilization for distributed multi-vendor environments, enabling
you to offer the best possible level of service in a cost-effective manner.
HP Process Resource Manager (HP PRM) is a resource management
tool used to control the amount of resources that processes use during
peak system load. HP PRM can manage allocation of the following
resources:
CPU: Ensures a minimum allocation of CPU; can also
simultaneously cap CPU resource usage for each group in the
configuration. (Starting with HP-UX 11i v3, per-group capping is
available.)
Memory: Ensures a minimum allocation of private real memory;
can also cap private memory usage. Allows you to allocate an
exact amount of shared memory.
Disk bandwidth: Ensures a minimum allocation of disk bandwidth
Performance Management Pack detects, analyzes, and explains
hardware bottlenecks on HP Integrity servers running Windows.
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 11
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
ProLiant Essentials
Rapid Deployment Pack
(designed for Windows
and Linux for HP
Integrity Server Blades
only)
Secure Resource
Partitions
Software Distributor-UX
OS Support
Rapid Deployment Pack (RDP) extends HP Systems Insight Manager
with a complete deployment solution for HP Integrity server blades
running Linux or Windows. RDP provides a central location to configure
server hardware, deploy the Windows, Linux operating environments
and install HP Integrity Support Pack drivers using images and scripted
profiles.
One method the HP VSE uses to improve server resource utilization is
to consolidate multiple applications within a single operating system
image. Secure Resource Partitions combine kernel level security and
proven resource management to stack multiple applications within the
same operating system. HP Process Resource Manager and HP-UX
Workload Manager can dedicate specific resources to specific
applications within an operating system image, avoiding resource
contention issues. Using HP-UX 11i V2 Security Containment,
organizations can ensure that application instances cannot access
processes or files from other applications or the system. This ensures
that multiple application instances run securely in a consolidated
environment, providing the benefits of consolidation while preserving
the security of a scale out environment. For software licensing
purposes, the maximum number of CPUs in a Secure Resource
Partition can be capped.
Software Distributor (SD) is the HP-UX administration tool set used to
deliver and maintain HP-UX operating systems and layered software
applications. SD is delivered as part of HP-UX; you do not need to
download it separately.
HP-UX 11i v3 Mission Critical Operating Environment
HP-UX 11i v3 Enterprise Operating Environment
HP-UX 11i v3 Foundation Operating Environment
HP-UX 11i v3 Technical Computing Operating Environment
HP-UX 11i v2 Mission Critical Operating Environment
HP-UX 11i v2 Enterprise Operating Environment
HP-UX 11i v2 Foundation Operating Environment
HP-UX 11i v2 Technical Computing Operating Environment
Red Hat Enterprise Linux AS & ES v4
Novell SUSE Enterprise Linux v10
Microsoft Windows Server 2003, Enterprise and Datacenter Editions 64-bit)
OpenVMS v8.3 I64 Foundation Operating Environment for Itanium Servers
OpenVMS v8.3 I64 Enterprise Operating Environment for Itanium Servers
OpenVMS v8.3 I64 Mission Critical Operating Environment for Itanium Servers
NOTE: For a more complete and up to date information on HP-UX 11i support, please visit the
HP-UX11i website at http://www.hp.com/go/hpux11iblades
NOTE: For a more complete and up to date information on OpenVMS support, please visit the
HP-OpenVMS website at http://www.hp.com/go/openvms
NOTE: For a more complete and up to date information on Integrity Windows support, please visit
the HP Integrity Windows website at http://www.hp.com/go/integrity/windows
NOTE: For a more complete and up to date information on Linux Operating Systems on Integrity
or BladeSystem platforms, please visit the Integrity and BladeSystem Linux matrix website:
http://www.hp.com/go/lxintegritycert
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 12
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Supported Software
Options
HP Integrity Virtual Machines
HP Integrity Essentials Virtualization Manager
HP Integrity Essentials Capacity Advisor
HP Secure Resource Partition
HP-UX Workload Manager
HP Virtual Server Environment Suite for HP-UX 11i for HP Integrity server blades
HP Serviceguard for HP-UX 11i
HP Serviceguard Manager
HP Serviceguard Extensions for SAP
HP Serviceguard Extensions for Faster Failover
HP Integrity iLO Power Regulator for HP-UX 11i v3
HP Insight Power Manager
GlancePlus Pak
Performance Manager and Agent
Intelligent
Manageability
HP Integrity Integrated Lights-Out 2 (iLO 2) Advanced Pack (factory integrated with the HP
Integrity BL860c)
Virtual serial console (Multiple, mirrored sessions, with previous context and console log buffer)
Virtual Media (CD, DVD, and ISO file image)
Virtual Power Button Control
Integrated Remote Console (virtual KVM) for Windows environments
Embedded system health and Integrity fault management Diagnostics and troubleshooting:
virtual front panel
log access to Integrity SEL
FPL Blade power consumption reading
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS browser
Command Line and scripted access Industry Standard RC4, 128-bit Secure Sockets Layer (SSL)
and Secure Shell (SSH) Security
Directory Services Integration (LDAP)
Support for 19 user accounts with customizable access privileges
NOTE: Advanced features such as Directory Services Integration (LDAP), vKVM for Windows and
browser accessible Virtual Media are included with the HP Integrity BL860c server blade.
Availability
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Two hot-plug SAS hard drive bays and integrated RAID (LSI 1068) controller on every server
blade
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load
balancing)
On line memory page deallocation
ECC protected DDR2 memory
Memory double chip spare to overcome two DRAM chip failures
Dynamic Processor resilience and deallocation with HP-UX
Journal file system with HP-UX*
Auto reboot
HP Serviceguard for HP-UX*
HP Serviceguard Extension for RAC for HP-UX*
HP Serviceguard Extension for SAP for HP-UX*
Serviceguard Manager for HP-UX and Linux Clusters*
HP Event Monitoring Service
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 13
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
HA Monitors for HP-UX
HA Toolkits for HP-UX and Linux
HP Mirrordisk/UX* (Included if purchase HP-UX 11i Enterprise or Mission-Critical OEs)
Extended Campus Cluster*, HP Metrocluster*, and HP Continentalclusters* for HP UX
HP System Insight Manager (SIM) for proactive fault management
HP StorageWorks Cluster Extension XP for Linux
HP Serviceguard Storage Management Suites for HP-UX*
*NOTE: Fee based software products
Industry Standard
Compliance
Security
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Hardware Security
Power-on password
Administrator's password
Integrity Integrated Lights Out 2 has 19 customizable user accounts and SSL encryption
Integrity Integrated Lights Out 2 can be disabled via a Global Setting
SSL encryption on web console
Platform security fundamentals
Designed for the optimal protection against both external and internal threats, HP-UX 11i offers
industry-leading breadth and depth of UNIX security features. Focused on feature integration
aimed at proactively mitigating risk, reducing compliance cost and accelerating time to
implementation, HP-UX security solutions significantly lower IT costs. This set of fully integrated
and complementary features is designed to provide layered security with in-depth protection of all
your enterprise assets by protecting data, systems and identities. For more details, visit
www.hp.com/go/hpux11isecurity
Downloads and
Function
documentation
Encrypted volume and
EVFS is an operating system service that fills the compliance need to
file system (EVFS)
store files in a way that they cannot be read by unauthorized parties who
obtain physical access to storage. Files and databases from current
applications can be encrypted without changes to the application or
underlying storage infrastructure. Read more
Trusted Computing
HP-UX TCS provides software support for hardware-enforced key
Services (TCS)
management on supported HP Integrity servers. By providing a low-cost
embedded security chip option (known as a Trusted Platform Module) in
its zx2-based Integrity servers, HP has established a foundation for
strong protection of sensitive information - including cryptographic keys,
such as for EVFS.
Security containment
HP-UX 11i security containment introduces three core technologies:
compartments, fine-grained privileges, and role-based access control.
Together, these three components provide a highly secure operating
environment without requiring applications to be modified. Read more
Protected Systems:
PS-Webserver is a pre-configured secure Web services platform built
Webserver (PSon HP-UX. The secure architecture and run time environment isolates
Webserver)
the Internet from backend servers and isolates the Web server from the
intranet. Read more
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 14
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Open SSL
Open SSL offers a general-purpose cryptography library and
implementation of the Secure Sockets Layer (SSL v2/v3) and Transport
Layer Security (TLS v1) protocols.
Secure Shell
Secure Shell is a powerful software-based approach to encrypted
network security. It provides secured remote login. Credentials and data
sent over the network are encrypted by SSH-1 or SSH-2 protocols and
decrypted once they reach their destination
IPSec
IPSec adds integrity protection and confidentiality to network
communication over the Internet and within the enterprise to
applications which lack these capabilities without modifying existing
applications.
MD5 Secure Checksum MD5sum provides a cryptographic file integrity utility and API based on
(MD5sum)
the standard Message Digest 5 (MD5) algorithm.
HP-UX 11i Internet
In addition to the fully-supported features listed above, HP packages a
Express
number of limited-support open source products that offer additional
data security, including: OpenSC/OpenCT, ClamAV, CyrusSASL,
GnuPG, SSLDump, Stunnel, and Tripwire.
Bastille
Bastille is a very easy-to-use security hardening wizard (also known as
a lockdown wizard) that enhances the security of an HP-UX 11i host by
turning off unneeded services, tightening security configuration settings,
configuring IPFilter, etc. It accommodates the various degrees of
hardening required for web, application and database servers, and can
walk a non-security expert through the hardening decisions.
Host IDS
HIDS enhances host-level security with near real-time automatic
monitoring of each configured host for signs of potentially damaging
intrusions. HIDS is a standard feature of HP-UX 11i, making HP the only
systems vendor to offer its own host intrusion detection product. Read
more
Secure resource
Secure Resource Partitions combine kernel level security (via Security
partitions
Containment) and proven resource management to stack multiple
applications within the same operating system.
IPFilter
IPFilter is a stateful firewall (filters IP packets to control packet flow in or
out of the system; stateful simplifies and increases security of rule
definitions by allowing return traffic based on outbound rules without
having to define broader inbound rules). HP's unique dynamic
connection allocation provides protection from denial-of-service attacks.
IPFilter provides increased security defense by minimizing the number
of server exposure points.
Software Assistant
HP-UX SWA is a command-line tool that consolidates, simplifies and
(SWA)
helps automate patch and security bulletin management on HP-UX
systems. The SWA tool is the HP-recommended utility to maintain
currency with HP-published security bulletins for HP-UX software.
Install-time Security
Install-time Security (ITS) is available to customers running HP-UX 11i
v2 or later releases of the operating system, as an install option to
lockdown systems during installation. ITS makes HP-UX 11i more
secure out-of-the-box when customers select higher security levels.
There are four choices, ranging from a highly locked down (DMZ) level
with a tightly configured IPFilter firewall blocking most inbound traffic
(and many services also disabled or secured) to a maximum
compatibility level which installs security tools, but doesn't apply a
security level.
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 15
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Boot Authentication
A site's security policies may require users to authenticate before they
can boot the system into single-user mode. Previously, this feature was
only available on a system that had been converted to Trusted Mode.
This product now provides secure single-user mode with root password
protection, but without the overhead of converting the system to trusted
mode.
Standard Mode Security Enhances the system security of HP-UX 11i v2 and v3. Several security
Extensions
features previously available only in trusted mode are now available on
standard mode HP-UX 11i systems. Features include enhanced
password and user account security, such as password expiration on
inactivity history reuse restrictions, auditing, and much more.
Shadow Passwords
Shadow Passwords enhance system security by hiding user encrypted
passwords in a shadow password file. Encrypted passwords previously
stored in the publicly readable /etc/passwd file can be optionally moved
to the /etc/shadow file, which is accessible only by a privileged user.
Strong Random Number The Strong Random Number Generator provides a cryptographically
Generator
strong, non-reproducible source of true random numbers for
applications with strong security requirements, such as for generating
encryption keys
HP-UX 11i Internet
Express
In addition to the fully-supported features listed above, HP packages a
number of limited-support open source products that offer additional
system security, including: Chkrootkit, PAM_passwdqc, DanteSOCKS,
Snort, Nessus, Xinetd.
Identity Management
Providing the most complete and integrated solution for security
Integration (IdMI)
management, IdMI allows administrators to enforce critical system
access and authorizations. In addition to integrated enforcement, with
the bundled version of Select Access for IdMI, customers benefit from
single-vendor support for this mission critical capability.
Select Access for IdMI Select Access for IdMI is a follow-up product to the HP-UX Identity
Management Integration feature. This version of Select Access supports
complete administration of HP-UX security policy for both user
authentication and access control privileged functions within the OS.
HP-UX security policy can be centrally controlled and managed through
Select Access.
Role-based Access
HP-UX RBAC (a component of security containment) is an alternative to
Control (RBAC)
the traditional "all-or-nothing" root user model, which grants permissions
to the root user for all operations, and denies permissions to non-root
users for certain operations. HP-UX RBAC allows you to distribute
administrative responsibilities by creating roles with appropriate
authorizations and assigning them to non-root users and groups.
AAA Server
HP-UX 11i AAA Server provides authentication, authorization and
accounting services using the RADIUS and EAP protocols to
authenticate and authorize user access to network devices and software
applications. The AAA Server also generates usage logs for accounting,
auditing and billing purposes.
Red Hat Directory Server Red Hat Directory Server is a Lightweight Directory Access Protocol
(LDAP) compliant software server that centralizes user profiles,
application settings, group data, policies and access control information
into a network-based registry. The server is available on HP-UX 11i and
operates on both HP 9000 and HP Integrity 64-bit hardware server
platforms.
LDAP-UX Client
With growth, consolidation and a dynamic environment, enterprises
need new technologies to manage and verify security in their IT
environments. In a highly distributed environment, local processes,
security practices and administration methods are often inconsistent,
repetitive and difficult to audit. With LDAP-UX Enterprise IT architects
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 16
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
can use LDAP directories as one tool to help unify and simplify many of
the above-mentioned practices
Kerberos Server
Kerberos Server provides key distribution facilities to implement the
Kerberos authentication protocol in network-distributed enterprises. It
operates with an LDAP directory providing integrated identity
management for authentication and access control.
PAM Kerberos
PAM Kerberos provides transparent Kerberos login support for HP-UX.
Kerberos Client
HP-UX provides Kerberos Client software including libraries, header
files, and utilities for implementing secured client/server applications
HP-UX 11i Internet
In addition to the fully-supported features listed above, HP packages a
Express
number of limited-support open source products that offer additional
identity management, including: Perl-LDAP, sudo, and OpenSAML.
Common Criteria certification
HP-UX 11i v3, the latest release of HP's strategic UNIX operating environment running on HP
Integrity server blades in evaluation for Common Criteria Certification.
Many enterprise and government customers require this vendor-independent security certification
because it increases confidence in the product's security assurance, functionality, quality and
effectiveness. Many governments, including the United States, require certification for government
IT procurement.
Certification evaluations are only conducted by the evaluation agency after release of the product.
HP expects the certification for EAL4 Common Criteria (ISO 15408) Assurance Level, augmented
by ALC_FLR.3 (flaw remediation), using the Controlled Access (CAPP), Role-Based Access
Control (RBACPP) Protection Profiles and nPartitions (nPars) to be completed in the 4th quarter
2007.
View the in-evaluation statement for more information.
The HP-UX 11i v2 operating system running on HP Integrity server blades has been successfully
evaluated against the requirements for the EAL4 Common Criteria (ISO 15408) Assurance Level,
augmented by ALC_FLR.3 (flaw remediation), using the Controlled Access (CAPP) and RoleBased Access Control (RBAC) Protection Profiles. EAL4+ is sometimes used as the abbreviated
form for additional assurances. Details of the evaluation and evaluated configuration are available
at
http://www.commoncriteriaportal.org/public/files/epfiles/CRP225.pdf and
http://www.commoncriteriaportal.org/public/files/epfiles/hp-ux11iv2.pdf.
For more details on HP-UX 11i common criteria certification, visit
http://h20338.www2.hp.com/hpux11i/cache/532758-0-0-0-121.html
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP Integrity Server Blades, HP
ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx,
EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to http://www.hp.com/go/factory-express.
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 17
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
HP Enterprise
Configurator
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations
of our valued customers. If you require "custom" rack configuration, please contact HP's Customer
Business Center or an Authorized Partner for assistance. For additional information please visit:
http://h30099.www3.hp.com/configurator/
Service and Support
HP Premium Services are available for the HP Integrity BL860c server blade. These services offer
integrated hardware and software support to help customers maintain a robust, stable, flexible IT
environment that enhances their business agility. They encompass today's most popular products,
including UNIX, Windows and Linux servers, as well as mobile technology, network devices,
desktops, printers, storage solutions, management software and more.
All of these Premium offerings let customers leverage HP Services multi-vendor, multi-technology
experience and expertise; global reach with delivery capabilities from 600 offices in 160 countries;
single-point-of-contact problem diagnosis and resolution; advanced remote monitoring and
performance enhancement technologies; and proven support management processes based on
IT best practices.
HP Services professionals can help customers identify the Premium support offering that fits their
business and technology goals. HP Premium Hardware and Software Services include:
Mission Critical Partnership – custom services to help you achieve your strategic business
goals and fulfill your most demanding service-level commitments through continual servicequality improvements
HP Critical Service – comprehensive preventive services and super-responsive support to
maximize availability and minimize downtime risk exposure in mission-critical environments
HP Proactive 24 Service – collaborate with HP Services professionals to improve
operational effectiveness, performance, and stability through joint services planning and
24x7 hardware/Software Support
Support Plus 24 – 24x7x365 onsite hardware and over-the-phone Software Support for HP
and selected multi vendor products, plus software updates at substantial subscription
savings
Support Plus – the economical choice for single-source hardware/Software Support
delivered during extended business hours, as well as cost-saving software updates
This product is covered by a global limited warranty and supported by HP Services.
NOTE: Server Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
NOTE: Server Blade Enclosure Limited Warranty includes 3 year Parts, 3 year Labor, 3-year onsite support.
Care Pack services provide a range of life cycle support options that let you choose the service
levels that meet your business requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24
hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support.
System Management, Performance Services and Mission Critical Support Solution
NOTE: For more information regarding the Blade service portfolio visit our worldwide web site on
the internet at: http://h20219.www2.hp.com/services/cache/81725-0-0-225-121.html
HP Care Pack services for the c7000 Enclosure cover the enclosure, power supplies and fans. HP
qualified rack options are covered by these services when installed within the same rack. HP
Supported Ethernet devices covered include the Ethernet Pass-Through Module, Fibre Channel
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 18
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Pass-Through Module and GbE2c Ethernet Blade Switch and Cisco Catalyst 3020 Blade Switch.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
http://www.hp.com/go/proliant/carepack
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 19
QuickSpecs
HP Integrity BL860c Server Blade
Models
Two (2) Processors Base Models
HP Integrity BL860c
9010 SC (2P)
AD323A Opt #001
HP Integrity BL860c
9015 DC (2P)
AD323A Opt #002
HP Integrity BL860c
9040 DC (2P)
AD323A Opt #003
Processor(s)
One of the following
depending on model
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
HP Integrity BL860c
9110N SC (2P)
AD323A Opt #004
HP Integrity BL860c
9120N DC (2P)
AD323A Opt #005
HP Integrity BL860c
9140M DC (2P)
AD323A Opt #006
Processor(s)
One of the following
depending on model
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
Two (2) Intel® Itanium® Single-Core Processors Model 9010 (1.6 GHz,
6MB L3 cache)
Two (2) Intel® Itanium® Dual-Core Processors Model 9015 (1.4 GHz,
12MB L3 cache)
Two (2) Intel® Itanium® Dual-Core Processors Model 9040 (1.6 GHz,
18MB L3 cache)
1.2MB per Core Level 2 cache memory
No memory included (PC2-4200, DDR2-533)
4 Embedded NICs: Dual Broadcom 5704 Gigabit NICs plus (1)
additional 10/100 NIC dedicated to Integrity iLO 2 Management
LSI 1068 SAS Controller
No drives included; (2) SFF SAS drive bays
292GB SAS
None
Up to 8 supported in HP BladeSystem c7000 Enclosure
Two (2) Intel® Itanium® Single-Core Processors Model 9110N (1.6
GHz, 12MB L3 cache)
Two (2) Intel® Itanium® Dual-Core Processors Model 9120N (1.4 GHz,
12MB L3 cache)
Two (2) Intel® Itanium® Dual-Core Processors Model 9140M (1.67
GHz, 18MB L3 cache)
1.2 MB per Core Level 2 cache memory
No memory included (PC2-4200, DDR2-533)
4 Embedded NICs, Dual Broadcom 5704 Gigabit NICs plus (1)
additional 10/100 NIC dedicated to Integrity iLO2 Management
LSI1068 SAS Controller
No drives included; (2) SFF SAS drive bays
292GB SAS
None
Up to 8 supported in HP BladeSystem c7000 Enclosure
One (1) Processor Base Models
HP Integrity BL860c
9010 SC (1P)
AD217A Opt #001
HP Integrity BL860c
9015 (1P)
AD217A Opt #002
HP Integrity BL860c
9040 DC (1P)
AD217A Opt #003
Processor(s)
One of the following
depending on model
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
One (1) Intel® Itanium® Single-Core Processors Model 9010 (1.6 GHz,
6MB L3 cache)
One (1) Intel® Itanium ® Dual-Core Processors Model 9015 (1.4 GHz,
12MB L3 cache)
One (1) Intel® Itanium® Dual-Core Processors Model 9040 (1.6 GHz,
18MB L3 cache)
1.2MB per Core Level cache memory
No memory included (PC2-4200, DDR2-533)
4 Embedded NICs: Dual Broadcom 5704 Gigabit NICs plus (1)
additional 10/100 NIC dedicated to Integrity iLO 2 Management
LSI 1068 SAS Controller
No drives included; (2) SFF SAS drive bays
292GB SAS
None
Up to 8 supported in HP BladeSystem c7000 Enclosure
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 20
QuickSpecs
HP Integrity BL860c Server Blade
Models
HP Integrity BL860c
9110N SC (1P)
AD217A Opt #004
HP Integrity BL860c
9120N SC (1P)
AD217A Opt #005
HP Integrity BL860c
9140M SC (1P)
AD217A Opt #006
Processor(s)
One of the following
depending on model
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
One (1) Intel® Itanium® Single-Core Processors Model 9110N (1.6
GHz, 12MB L3 cache)
One (1) Intel® Itanium® Single-Core Processors Model 9120N (1.4
GHz, 12MB L3 cache)
One (1) Intel® Itanium® Single-Core Processors Model 9140M (1.67
GHz, 18MB L3 cache)
1.2 MB per Core Level cache memory
No memory included (PC2-4200, DDR2-533)
4 Embedded NICs: Dual Broadcom 5704 Gigabit NICs plus (1)
additional 10/100 NIC dedicated to Integrity iLO 2 Management
LSI 1068 SAS Controller
No drives included; (2) SFF SAS drive bays
292GB SAS
None
Up to 8 supported in HP BladeSystem c7000 Enclosure
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 21
QuickSpecs
HP Integrity BL860c Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration
Models
HP Integrity BL860c Server Blade
NOTE: Choose from base models above.
NOTE: Adding Option code "#0D1" to the Server Blade PN will integrate the
configured blade into the enclosure (which must be on the same order)
Configurable Model ships with:
Four embedded Gigabit Ethernet NIC ports plus (1) additional 10/100 NIC
dedicated to Integrity iLO 2 Management
Integrated LSI 1068 hardware RAID controller
Two small form factor (SFF) SAS hot plug hard drive bays
HP Integrity Integrated Lights-Out 2 Advanced Pack
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted):
Processors
Memory
RAID 1 Configuration
Upgrade Option
Select a base model (either 2P or 1P models) which has the desired CPU
offering.
HP 2GB REG PC2-4200 2x1GB 1RANK Kit
HP 4GB REG PC2-4200 2x2GB 2RANK Kit
HP 8GB REG PC2-4200 2x4GB 2RANK Kit
NOTE: Memory Modules consist of pairs of DIMMs
NOTE: DIMMs must be installed in pairs
Factory configured hardware RAID 1
NOTE: Requires two (2) SAS Hard Drives identical in speed and capacity
NOTE: Ordering AD242A#106 provides factory configuration of the embedded
LSI 1068 SAS controller to RAID1.
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
AD343A
AD344A
AD345A
AD248A #106
Page 22
QuickSpecs
HP Integrity BL860c Server Blade
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Options for Factory Integration
Fibre Channel
Mezzanine Options
Hard Drives
Fibre Channel
Mezzanine Options
c-Class Mezzanines
Ethernet Mezzanine
Options
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem
NOTE: BL860c supports HP Virtual Connect Fibre Channel Interconnect
Modules. See http://www.hp.com/go/bladesystem/virtualconnect for complete
details
Serial Attached SCSI (SAS) SFF Hot Plug
HP 72GB 3G SAS 15K SFF SP HDD
HP 36GB 3G SAS 15K SFF SP HDD
HP 146GB 3G SAS 10K SFF HDD
HP 72GB 3G SAS 10K SFF SP HDD
HP Dual Port 4Gbps QLogic FC HBA (Type I Mezz)
NOTE: BL860c supports HP Virtual Connect Fibre Channel Interconnect
Modules. See http://www.hp.com/go/bladesystem/virtualconnect for complete
details
HP BLc SB40c PCIe Mezzanine Pass Thru Option Kit
NOTE: Needed to support the SB40c storage blade with HP c-Class
BladeSystem full-height server blades.
NOTE: Adding option "0D1" to these options indicates factory integration of that
product.
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: Provides four additional Gigabit Ethernet ports per I/O expansion slot.
NOTE: BL860c supports HP Virtual Connect Ethernet Interconnect Modules.
See http://www.hp.com/go/bladesystem/virtualconnect for complete details
403619-B21
431935-B21
431933-B21
431958-B21
375861-B21
403619-B21
431643-B21
409377-B21
Step 4: Choose Additional Options for Field Upgrades
NOTE: For additional options, including server blade enclosure with enhanced backplanes, interconnect options and power
subsystem options; please refer to the "Options" section below.
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 23
QuickSpecs
HP Integrity BL860c Server Blade
Options
Processors (field
upgrade only)
Memory
Intel® Itanium® Dual-Core Model 9040 (1.6 GHz, 18MB L3 cache, FSB533)
Intel® Itanium ® Dual-Core Model 9015 (1.4 GHz, 12MB L3 cache, FSB400)
Intel® Itanium® Single-Core Model 9010 (1.6 GHz, 6MB L3 cache, FSB533)
Intel® Itanium® Single-Core Processors Model 9110N (1.6 GHz, 12MB L3
cache)
Intel® Itanium® Single-Core Processors Model 9120N (1.4 GHz, 12MB L3
cache)
Intel® Itanium® Single-Core Processors Model 9140M (1.67 GHz, 18MB L3
cache)
NOTE: HP Integrity BL860c processor upgrade kits contain one processor.
Processors must be identical. No mixing of processor models is allowed.
NOTE: The Integrity BL860c only supports 1 or 2 processor configurations.
AD270A
AD271A
AD272A
AD395A
HP 2GB REG PC2-4200 2x1GB 1RANK Kit
HP 4GB REG PC2-4200 2x2GB 2RANK Kit
HP 8GB REG PC2-4200 2x4GB 2RANK Kit
AD343A
AD344A
AD345A
AD394A
AD396A
NOTE: Memory Modules consist of pairs of DIMMs
DIMMS must be installed in pairs
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs
installed in the lowest numbered slots.
Hard Drives
Serial Attached SCSI (SAS) SFF Hot Plug
HP 72GB 3G SAS 15K SFF SP HDD
HP 36GB 3G SAS 15K SFF SP HDD
HP 146GB 3G SAS 10K SFF HDD
HP 72GB 3G SAS 10K SFF SP HDD
NOTE: SAS drives have a 3 year warranty.
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications
such as capacity, height, width, interface, transfer rate, seek time, physical
configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
431935-B21
431933-B21
431958-B21
375861-B21
c-Class Mezzanines
HP BLc SB40c PCIe Mezzanine Pass Thru Option Kit
NOTE: Required to support the SB40c storage blade (P/N 411243-B21) or PCIExpress Expansion Blade (P/N 448018-B21) with HP c-Class BladeSystem fullheight server blades.
431643-B21
Fibre Channel
Mezzanine Options
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem
NOTE: Supports HP c-Class BladeSystem server blades
403619-B21
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 24
QuickSpecs
HP Integrity BL860c Server Blade
Options
InfiniBand Mezzanine HP 4X DDR IB Mezzanine HCA (no Software)
Options
HP 4X DDR IB Mezzanine HCA (with Voltaire Software
HP 4X DDR IB Mezzanine HCA (with Cisco Software
NOTE: For Linux support See the HPC Cluster Platform 6000 at:
http://www.hp.com/go/hptc
410533-B21
409377-B21
438670-B21
Ethernet Mezzanine
Options
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: Provides four additional Gigabit Ethernet ports per each I/O expansion
slot.
447883-B21
HP StorageWorks
SB40c Storage Blade
HP StorageWorks SB40c Storage Blade
NOTE: Please see the SB40c Storage Blade QuickSpecs for additional options
and configuration information at:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
(Worldwide)
411243-B21
USB Options
HP Multi Bay II cradle (to hold DVD Drives below)
HP Multi Bay II DVD+/-RW Drive
NOTE: HP-UX does not support writing to a DVD drive. MultiBay cradle/drive is
cabled to c-Class enclosure via local I/O cable (shipped with c-Class enclosure).
NOTE: PC or Notebook computer is NOT required.
Service and Support
Offerings (HP Care
Pack Services)
NOTE: The HP Care Pack service part numbers below for the Integrity BL860 cClass server blades, cover the server blade and all HP branded hardware
options qualified for the server, purchased at the same time or afterwards,
internal to the server.
NOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure,
power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP Supported Ethernet devices
covered include the Ethernet Pass-Through Module, Fibre Channel PassThrough Module, Cisco Catalyst 3020 Blade Switch and GbE2c Ethernet Blade
Switch.
NOTE: The services listed below are available for both Integrity and ProLiant
blades, as well as the c7000 enclosure, when ordering flexible services
Support Plus
Support Plus, 1 Year
Support Plus, 3 Years
Support Plus 24, 1 Year
Support Plus 24, 3 Years
HP Proactive Service
HP Proactive Service, 24 Hour, 1 Year
HP Proactive Service, 24 Hour, 3 Year
HP Critical Service
Hardware Only, Critical Service, 7-Day x 24 Hour, 1 Year
Hardware Only, Critical Service, 7-Day x 24 Hour, 3 Years
Installation Services
Integrity BL860c Server Blade Hardware Installation
ProLiant BL c-Class Enclosure and Server Blade Hardware Installation
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
PA509A
PA851A
HA109A1
HA109A3
HA110A1
HA110A3
HA111A1
HA111A3
HA112A1
HA112A3
HA113A1
HA113A1
Page 25
QuickSpecs
HP Integrity BL860c Server Blade
Options
Installation & Start-up Services
Provides for the Installation and Start-up of ProLiant Essentials Rapid
Deployment Pack
NOTE: Provides installation on a Customer supplied server designated as a
Deployment Server. Includes the deployment of a single server. This new server
will be deployed using either one of the pre-configured scripts or an image. In
addition, the service will provide for the capture and storage of the configuration
of the newly deployed server and orientation on product usage. To be delivered
during standard office ours, standard office days.
Provides for the Installation and Start-up of Rapid Deployment Pack
Implementation of Rapid Deployment Pack (Basic) (Electronic)
Provides for the Installation and Start-up of System Insight Manager (Electronic)
HP Installation & Startup Service for HP BladeSystem Infrastructure
Provides for an integrated hardware and software implementation that includes
remote service planning, onsite deployment of hardware and software,
installation verification testing and customer orientation. Hardware deployment
covers the installation of a single BladeSystem enclosure that includes server
blades (up to 16), Ethernet network interconnect, and power options. Software
deployment covers the installation and configuration, where required of HP
BladeSystem Essential Insight Control Datacenter Edition which includes
Systems Insight Manager (SIM), HP Rapid Deployment Pack (RDP) and
Performance Management Pack (PMP), HP-UX ignite server or HP-UX manual
load, and deploy up to two editions of either Windows or Linux, using scripted
operating system installation software.
HA114A1
HA114A1
HA124A1
HA114A1
For more information: http://www.hp.com/services/bladesystemservices
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 26
QuickSpecs
HP Integrity BL860c Server Blade
Memory
DIMM installation guidelines:
1. All DIMMs must be PC2-4200 DIMMs (DDR2 533MHz)
2. Both DIMM slots in a memory bank must be populated.
3. Banks must be populated in sequential numeric order, starting with bank 0.
4. Both DIMMs in a memory bank must be identical. Install identical DIMMs in pairs, starting with DIMM socket A, bank 0.
5. DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the smallest numbered DIMM slot.
HP Integrity BL860c Server Blade
Standard Memory
4GB Registered PC2-4200, DDR2 533MHz ECC DIMMs (4 x 1 GB)
Memory Bus Bandwidth:12.8 GB/s
Standard Memory Plus Optional Memory
Up to 48GB of PC2-4200, DDR2-533 DIMMs memory is available.
Memory
Standard
4GB
Maximum
48GB
Slot
0A
1GB
1A
1GB
0B
1GB
1B
1GB
2A
Empty
3A
Empty
2B
Empty
3B
Empty
4A
Empty
5A
Empty
4B
Empty
5B
Empty
0A
4GB
1A
4GB
0B
4GB
1B
4GB
2A
4GB
3A
4GB
2B
4GB
3B
4GB
4A
4GB
5A
4GB
4B
4GB
5B
4GB
Following are memory options available from HP:
HP 2GB REG PC2-4200 2x1GB 1RANK Kit
HP 4GB REG PC2-4200 2x2GB 2RANK Kit
HP 8GB REG PC2-4200 2x4GB 2RANK Kit
NOTE: Must be installed in pairs.
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs smallest numbered slot.
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
AD343A
AD344A
AD345A
Page 27
QuickSpecs
HP Integrity BL860c Server Blade
Storage
1-2
2 x SFF SAS Hot Plug Hard Drives
Hard Drives
SAS Hard Drive
72GB 15,000 rpm SAS
SFF
36GB 15,000 rpm SAS
SFF146GB 10,000 rpm
SAS SFF
146GB 10,000 rpm SAS
SFF
72GB 10,000 rpm SAS
SFF
36GB 10,000 rpm SAS
SFF
Quantity
Supported
2
Position
Supported Controller
1-2
LSI 1068
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 28
QuickSpecs
HP Integrity BL860c Server Blade
Power Specifications
NOTE: To review maximum system power ratings for facilities planning purposes use the Active Answers Blade Power Sizer
which is available via the online tool located at URL: http://h71019.www7.hp.com/ActiveAnswers/cache/347628-0-0-0121.html
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 29
QuickSpecs
HP Integrity BL860c Server Blade
Technical Specifications
System Unit
Dimensions
Height
14.42 in (36.63 cm)
Depth
20.02 in (50.85 cm)
Width
2.03 in (5.16 cm)
Shipping Dimensions Height
21.50 in (54.61 cm)
Depth
23.13 in (58.75 cm)
Width
9.94 in (25.25 cm)
Weight
Maximum
22.8 lbs (10.3 kg)
Temperature Range* Operating
10° to 35° C (50° to 95° F)
Non-Operating
-40° to 60° C (-40° to 140° F)
Storage
-20° to 60° C (-4° to 140° F)
Maximum Wet Bulb
30° C (86° F)
Temperature
Relative Humidity**
Operating
10% to 90%
Shipping
10% to 90%
Storage
10% to 95%
*NOTE: All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m
(1.8°F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating
limit is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or
30.3 KPa/4.4 psia.
**NOTE: Storage maximum humidity of 95% is based on a maximum temperature of 45°C
(113°F). Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
SAS RAID LSI 1068
Controller
Disk Drive and
Enclosure Interface
SAS Connectors
Cache Memory Speed
Server Interface
SAS Speed
Cache Memory
3G SAS (Serial Attached SCSI)
2 internal (SFF8484) x4 wide port connectors
DDR-1/266 MHz provides up to 4.2 GB/s maximum bandwidth.
x8 2.5G PCIe provides 2GB/s maximum bandwidth.
x8 3G SAS provides 2.4GB/s maximum bandwidth.
40-bit 64MB or 128MB cache: ECC protection, battery-backed, and
transportable
Up to 32 logical volumes
Logical Drives
Supported
Maximum Logical Drive292GB (2 x 146GB)
Capacity
Host Memory
64-bit, supporting greater than 4GB server memory space
Addressing
RAID Support
RAID 1 (Mirroring)
Upgradeable Firmware Upgradeable Firmware
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 30
QuickSpecs
HP Integrity BL860c Server Blade
Technical Specifications
Embedded Dual
Network Interface
Broadcom 5704 Gigabit Compatibility
NICs
1000Base-Sx
IEEE 802.3ab
1000Base-Sx
Data Transfer Method PCI Express, four lanes (x4)
Network Transfer Rate 1000Base-SX
2000 Mb/s
(Theoretical Maximum
Values)
Connector
RJ-45 (at SWM of
enclosure)
Cable Support
1000 Base-TX
Cable Support 1000 Base-TX Category 5 UTP
up to 328 ft (100 m)
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12671 Worldwide QuickSpecs — Version 10 — 1.14.2008
Page 31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising