LPP 1051 LPP 6509

LPP 1051 LPP 6509
 e
UT CE
Standard Roll Laminator for hot lamination
Y =
The most suitable machine for continuous lamination
{TT
LPP 1051 LPP 6509
Maintaining high quality lamination with a vivid finish in
continuous lamination.
Mandrels for use both of 2-1/4 inch and 3 inch core roll film.
Lamination temperature and speed is adjustable
Digital panel enables easy operation
Designed for safe and efficient operation
1000mm (AOPlus) Maximum Laminatable Width 650mm (A1)
0.7-1.9m/min. Lamination Speed 0.7-1.9m/min.
Room Temperature,50-130C Temperature Control Range Room Temperature,50-130C
Internal heating Hot Roller type Heating Method Internal heating Hot Roller type
2933W Power Consumption 2000W
107.0kg Net Weight 80.0kg
1355 (W) x500 (D) X 402 (H) mm Dimensions 1005 (W) 500 (D) 402 (H) mm
Max. Laminating Width A Opius R5X 8, Max. Laminating Width AT 2478
N
Lamipacker LPP1051/6509
FUJIPA Lamipacker LPP1051/6509
Merits of Lamipacker LPP1051/6509
® Uses our Standard high quality Hot Roller Lamination system.
® LPP1051/6509 is ideal for continuous lamination for a great range of laminating requirements.
® Both 2-1/4 inch and 3 inch diameter core size films can be used with the compatible mandrel.
SPECIFICATIONS (LPP1051)
Maximum Laminatable Width 1000mm (AOPlus)
Maximum Laminatable Thickness 0.8mm
Mounting 5.0mm (+)
Lamination Speed
0.7-1.9m/min. (adjustable)
Temperature Control Range
Room Temperature,50—130"C(adjustable)
Warm-up Time
About 15-20min.
Heating Method
Internal heating Hot Roller type
Power Consumption
2933W
Electrical
High Voltage Area AC 220-240V 50/60Hz, Single Phase
Dimensions
1355 (W) x 500 (D) x 402 (H) mm
Net Weight
107.0kg
Remarks
Foot Switch, Rear Cutter & Stand Alone unit
are equipped as standard
(#) Mount lamination is available on thick board.
вето я % # + + # #4 + #4 # # 4 #4 # т т
SPECIFICATIONS (LPP6509)
Maximum Laminatable Width 650mm (A1)
Maximum Laminatable Thickness 0.8mm
Mounting 5.0mm (+)
Lamination Speed
0.7-1.9m/min. (adjustable)
Temperature Control Range
Room Temperature, 50-130°Cl adjustable)
Warm-up Time
About 15-30min.
Heating Method
Internal heating Hot Roller type
Power Consumption
2000W
Electrical
High Voltage Area AC 220-240V 50/60Hz
Dimensions
1005 (W) x 500 (D) X 402 (H) mm
Net Weight
80.0kg
Remarks
Foot Switch Rear Cutter & Stand Alone unit
are equipped as standard
(#) Mount lamination is available on thick board.
© Be sure to use FUJI exclusive lamination film, “CP ROLL.” Our standard thickness of “CP ROLL"
are 38, 80, 100, and 125 microns. Please contact our dealer for further information about films.
Fujipla “CP ROLL” film
Thickness Width Length Size Quantity/carton
38micron 310mm 200m АЗ 4
3&micron 450mm 200m Al 4
38micron 635mm 200m Al 4
38micron 1,000mm 200m AOPlus 2
T5micron 310mm 100m АЗ 4
T5micron 450mm 100m Al 4
T5micron 635mm 100m Al 4
75micron 1,000mm 100m AOPlus 2
125micron 310mm 100m АЗ 4
125micron 450mm 100m Al 4
125micron 635mm 100m Al 4
125micron 1,000mm 100m AOPlus 2
Fuji Lamipacker Meister series for professional use
LPD3210 Meister: High grade 4 roller laminator (A3 type)
LPD3212 Meister 6: Flagship laminator with 6 rollers (A3 type)
LPD4212 Meister 6: Flagship laminator with 6 rollers (A2 type)
# The contents of this brochure are valid as of Jan., 2005.
CE
For Further Information
ID Card System, Laminating Machine & Film
Manufactured by
FUJIPLA Inc.
TOKYO, JAPAN
URL: http://www.fujipla.co.jp
Printed In Japan
05A-5000N
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising