GCP-1 - Component Distributors, Inc.

GCP-1 - Component Distributors, Inc.
Data Sheet
CDI Gage Collector Pro
Desktop Data Collection Kiosk
CDI Part#: GCP-1
CDI Gage Collector Pro
Desktop Data Collection Kiosk
Component Distributors Inc.
Web: www.cdiweb.com
Email: sales@cdiweb.com
Phone: 1-800-777-7334
About
CDI Gage Collector
Pro Desktop Data
Collection Kiosk
CDI part#: GCP-1
CDI Gage Collector Pro is the industry’s premier desktop Metrology Data Collection Management Kiosk. Featuring a user friendly wide screen touch panel PC, Gage
Collector Pro offers the Shop Floor Gaging Operation to now come full circle with an
IP65 rated Kiosk designed to bring Measurement Data (Wireless or Wired) seamlessly into a user designed spec plan. Pre-configured with industry giant Prolink’s Data
Management Software, Gage Collector Pro is ready to go.
At a glance: the CDI Gage Collector pro Includes:
LCD Monitor Dust
Cover & Rugged Bench
Top Stand
21.5” wide screen
panel PC
GageStation
By Prolink
Slim Fanless Series
Rugged All-in-One Touch
Panel PC. 21.5" Touch Display.
GageStation is a combination license
of both QC-Gage and QC-CALC RealTime for a gage bench.
02
Component Distributors Inc.
Scientifically advanced copolymer
repels dust and moisture. Supple and
flexible down to -80° F so installation
and storage is a breeze.
Add a
podium
For those looking to
have a "Mobile"
Kiosk, simply interface
your GCP-1 Kiosk to
the optional podium.
| CDI Gage Collector Pro Desktop Data Collection Kiosk | CDI Part # GCP-1
SLT 21.5 AIO, Intel Fanless J1900 CPU
features:
• Multi-Touch PCAP 21.5 inch LCD touch screen
• 1440 X 900 Widescreen Resolution
• Intel J1900 fanless CPU
• 4 gig RAM
• 500 Gb SATA HDD
• Windows 7 Embedded or 10 LTSB
• Integrated Wifi and LAN
• VGA and HDMI outputs,
• 2X RS232 port, 1X parallel port
• Black or Clear aluminum bezel
• Desktop Stand
• External UL listed power adapter
03
Component Distributors Inc.
| CDI Gage Collector Pro Desktop Data Collection Kiosk | CDI Part # GCP-1
provides 5-Wire resistive Touch
5-Wire Resistive Touch is the most widely used touch technology today. A resistive touch screen monitor is composed of a glass panel and a film screen, each covered with a thin metallic layer, seperated by a norrow gap. When a user touches the
screen, the two metallic layers make contact, resulting in electrical flw. The point of
contact is detected by this change in voltage.
Advantages:
• Can be activated with virtually any object (finger, stylus, gloved hand, pen, etc.)
• Has tactile feel
• Lowest cost touch technology
• Low power consumption
• Resistant to surface contaminants and liquids (dust, oil, grease, moisture)
04
Component Distributors Inc.
| CDI Gage Collector Pro Desktop Data Collection Kiosk | CDI Part # GCP-1
gagestation by prolink
introduction:
GageStation is a combination license of both QC-Gage and QC-CALC Real-Time
for a gage bench.
QC-Gage is a full-featured data collection application for use with Solartron Digital
Gaging Transducers and Hand Held Gages with SPC. The software allows inspectors to enter measurement data by keyboard or through a direct connection to one or
more gages. It displays this data both graphically and in table form, and automatically
interfaces with QC-CALC Real-Time. By using GageStation, you can identify and
isolate out-of-conformance parts.
how it works:
QC-Gage simulates the inspection technique of an automated inspection device such
as your Solartron Orbit 3 Probe or Mitutoyo Indicator. You program QC-Gage through
a simple wizard by answering questions that describe the sequence your inspectors
must follow. These “Spec Plans” are saved and run by your inspectors, leading them
in a consistent sequence of inspection. When all data and trace information (serial
number, lots, names, etc) is entered, it is then sent to QC-CALC Real-Time where the
data is plotted and any reporting and exporting is performed.
05
Component Distributors Inc.
| CDI Gage Collector Pro Desktop Data Collection Kiosk | CDI Part # GCP-1
additional information
CDI gage collector pro Applications:
• Shop Floor Inspection and Gaging.
• Identify and Isolate out-of-conformance parts.
• Develop your own Data Collecting Spec Plans.
• Data is plotted and reported in “Realtime”.
• Simplified output to SPC.
• Receive Hand Tool Data from Wireless Gages.
• Compatible with Mitutoyo, Mahr Federal, Starrett Hand Tool Gages.
• Interface with Microridge Wireless Transmitter.
• Interface with Solartron Orbit 3 Digital Probes.
22" (21.5W x16H x3D) LCD monitor dust cover & Stand
• Antistatic: Scientifically advanced copolymer
repels dust and moisture like rain off a duck’s back
feathers
• Cold-resistant : Supple and flexible down to
-80° F so installation and storage is a breeze
• Durable: Constructed of high tech 0.2mm EVA
Add a podium
vinyl for long-lasting protection
• Three Year Smooth-As-Coconut Oil Guarantee
for peace of mind and confidence in your buying
decision
For those looking to have a
"Mobile" Kiosk, simply interface
your GCP-1 Kiosk to the
optional podium.
for more information:
Toll-Free: 1-800-777-7334
Email: sales@cdiweb.com
Web: www.cdiweb.com
06
Component Distributors Inc.
| CDI Gage Collector Pro Desktop Data Collection Kiosk | CDI Part # GCP-1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising