SETUP from PC keyboard For KBW or KBW/RS232 interface

SETUP from PC keyboard For KBW or KBW/RS232 interface
SETUP from PC keyboard
For KBW or KBW/RS232 interface
1
Features
*
Simple installation ,keyboard Wedge Serial , Wand Emulation tc
* Superior keyboard wedge interface . NOVELL compatible – auto Caps lock
detection ensures that the data always appears on the computer just the way
it encoded in the bar code
*
Simple programming from your keyboard or scan bar codes!
*
Over 180 configurable options
*
Automatically clones decoders in under 10 seconds . over 300 decoders per hour
*
Auto detection of the type of computer (PC, XT,AT,PS/2,and XWindow terminals
with a PC Compatible keyboard interface)
*
Can be used with or without the keyboard
*
Supports over twenty different keyboard country layouts
*
Map bar code data to any key on the keyboard
*
Supports editing operations include (Insert stripping Filtering Convert Case)
*
Macro support replace a string in the bar code with another
* Programmable preamble postamble and termination strings
* READ/NO-READ indicators (buzzer and LED)
* superior reading performance utilizing advanced decoding algorithms
* Extended ASCII support for Code 128 bar codes
* Low power consumption
2
Using The Setup Mode To Configure The Decoder
The decoder can be configured through the use of the computer keyboard . The decoder must be
installed and powered to enter the setup mode Once the unit is powered up press and hold the
following keys :
Left-Control ,Caps Lock, Right-Shift ,and Backspace1
-orLeft-Control,F2,Right-Shift,and Backspace2
Once you release the keys , the decoder will produce a series of beeps , change the LED to
orange and display a message similar to the following on your display :
F1-F10=Options,Use ARROW KEYS to Toggle/Move ,ESC=Exit
To ensure that you have enough space on your command line for the decoder options to be
displayed we Reconnend that you either have your command prompt located at the root directory
or that you load an editor with a new file. This will allow the decoder to use most of the
characters on your computer display. For example, in Windows load Windows Write and in OS/2
load the Notepad program.
Note : In addition to suing your keyboard to enter Setup Mode you may scan the bar code below
Enter Setup Mode
Note: This page is onlyfor KBW interface reader, never execute any action if you are using
RS232 interface reader
3
Setup Category
key
F1
Category
Interface
Options
Transmit Speed
CTRL/Special Char Delay
Wedge Interface
Send Numerics As
Keyboard Country
Output Mode
Serial Baud Rate
Serial Data Bits
Serial Parity
Serial Duples
Serial Data Format
Inverted Serial Output
Serial Intercharacter Delay
Serial Caps Lock
Serial Num Lock
Wand Emulation Appedd Mode
Wand Emulation Max Segment Size
Wand Emulation Segment Output Delay
Setup Mode Lockout
F2
Decoders/Scanner
F3
F4
F5
F6
F7
Editing
Macros/Special Keys
Strings
Reserved
Buzze/LED
Decoders On/Pff
Code 39
UPC/EAN/JAN
UPC/EAN/JAN Supplements
Code 128
Interleaved 2 of 5
Industrial 2 of 5
Codabar
Code93
MSI/Plessey
Code11
Laser/CCD
Other
Edit#1- Edit#10
Macro #1- Macro#10 keys
String #1- String #10
Power Up Beep
Good Read Beep Tone
Beep Duration
No Read LED Delay
LED Power Save Mode
4
F8
Status/Diagnostics
F9
Cloning
F10
Reset All Defaults
Firmware Version and Release Date
Laser/CCD Scanner Testing
Keyboard Information
Show Scan Codes
Lockout Cloned Reader Setup Mode
Press ENTER To Begin Cloning
Reset All Defaults?
Editing Keys
For those categories which have more than one option , the UP and DOWN arrow and ENTER
keys are used to move form one option to the next . In addition to the UP and DOWN arrow
Keys, the CTRL UP and CTRL DOWN arrow keys are used to move to the bottom and the top
of the list . The following is a list special editing keys and a description of their function:
key
Left Arrow , Right Arrow
UP & Down Arrow
CTRL+UP& CTRL+Down
Arrow
Home & End
ALT Backspace
CTRL+KEYPAD
CTRL-KEYPAD
CTRL F7
CTRL F10
SHIFT F10
ALT F10
CTRL+ Escape
SHIFT+ Escape
ATL +Escape
Description
Toggles through the settings for the current option.
Moves from one option to the previous or next within the
category or group
Move to the top or bottom of the category or group
Moves to the beginning or end of an input field
Toggles the output mode during configuration , between
destructive backspace and non-destructive backspace.
Defaults to non-destructive backspace
Increases transmit speed during setup
Decreases transmit speed during setup
Test the current Beep Tone and Beep Duration
Resets the current option to the default setting
If you are in a category with groups (F2- F5),SHIFT F10
resets current group . If you are in a category without groups
(F1,F7- F10),SHIFT F10 resets the entire category
Resets all options in current category to default settings.
Exit configuration saving changes (Permanent)
Exit configuration saving changes(Temporary)
Exit configuration without saving changes.
Note: If you experience some character loss during setup , you may press the CTRL-(Keypad
Minus)key to solw character transmission , To speed up character transmission press the
CTRL-(Keypad plus)key.
Note: After 5 minutes of inactivity (no key presses ) the decoder will exit setup mode and save
all changes
5
The following sections document all of the setup mode categories and the groups and individual
options within each category . Next to the option name is the default setting for the option . In
addition to the default setting
the keys that are used for editing are listed to the right of the option name . The meaning of each
of the key cois as follows :
Key Lcon
← →
ALT
A S C I I
GROUP
OPERATION
STRING
TYPE
Meaning
The left and right arrow keys scroll through available settings
for the option.
An ALT keypad sequence may be used to enter characters for
entry into the field
All ASCII data is valid for the option .All characters are
available for entry into the field .
Used to indicate that the option represents a group of
sub-options .The left and right arrows scroll through the list of
option ..All characters are available for entry into the field 。
Used to indicate that the option represents an edit operation and
that all of the options listed below it are specific to that
operation until the next operation is defined .
Used to indicate that the option represents a string type and that
all of the options listed below it are specific to that type of
string until the next string type is defined
6
Setup from Bar Code Label
Multiscan Functions-1
OUTPUT FIRMWARE VERSION
RESET CONFIGURATION TO DEFAULTS
OUTPUT MODE
OUTPUT MODE – KEYBOARD WEDGE
OUTPUT MODE - SERIAL
OUTPUT MODE – WAND EMULATION
OUTPUT MODE - RESET
BUZZER/LED
GOOD READ BEEP TONE - NONE
GOOD READ BEEP TONE - RESET
GOOD READ BEEP DURATION –MEDIUM
LED POWER SAVE MODE - ENABLE
Multiscan Functions-2
IMAGE
DECODE OPTIONS REVERSE IMAGE-ENABLE
DECODE OPTIONS REVERSE IMAGE- DISAABLE
7
CODE ID
DECIDE OPTIONS SEND BAR CODE ID-DISABLE
DECODE OPTIONS SEND BAR CODE ID-RESET
DECODE OPTIONS SEND BAR CODE ID-AS A PREFIX
DECODE OPTIONS SEND BAR CODE ID-AS A SUFFIX
READING MODE
LASER/CCD MODE-SINGLE SCAN
LASER/CCD MODE-SINGLE SCAN NO TRIGGER
LASER/CCD MODE-MULTISCAN
LASER/CCD MODE-MULTISCAN NO TRIGGER
LASER/CCD MODE-MULTISCAN
LASER/CCD MODE-PULSE
Interface – KBW
PC Communication
WEDGE MODE-AUTODETECT
WEDGE MODE-SCAN SET2PASS THRU
8
Transmit Speed
TRANSMIT SPEED - 0
T RANSMIT SPEED - 25
LINGUAGE
KEYBOARD COUNTRY-USA
KEYBOARD COUNTRY-GERMAN
KEYBOARD COUNTRY-FRANCE
KEYBOARD COUNTRY-UNIVERSAL
Interface – Serial-1
2400
4800
9600
19200
HAND SHAKE
SERIAL HANDSHAKE-NONE
SERIAL HANDSHAKE-XON/OFF
9
SERIAL HANDSHAKE-RTS/CTS
SERIAL HANDSHAKE-ACK/NAK
SERIAL HANDSHAKE TIMEOUT-2 SECONDS
SERIAL HANDSHAKE TIMEOUT-5 SECONDS
Interface – Serial-2
PARAMETERS
SERIAL DATA BITS-8
SERIAL DATA BITS -7
SERIAL STOP BITS - 1
SERIAL STOP BITS - 2
SERIAL PARITY - NONE
SERIAL PARITY - ODD
SERIAL PARITY - EVEN
SERIAL PARITY - MARK
SERIAL PARITY - SPACE
SERIAL PARITY - RESET
10
Interface – WAND
CODE 128 WAND EMULATION - ENABLE
CODE 128 WAND EMULATION - DISABLE
SPEED
WAND EMULATION SPEED-SLOWEST(3)
WAND EMULATION SPEED-FASTEST(0)
BAR LEVEL
WAND EMULATION-BAR=1(HIGH)
WAND EMULATION-BAR=0(LOW)
CODE 11
CODE 11-ENABLE
CODE 11 - DISABLE
CODE 39
CODE 39 ENABLE
CODE 39 - DISABLE
FULL ASCII ENABLE
FULL ASCⅡ DISABLE
11
Symbologies On/Off—1
CODE 93
CODE 93 - ENABLE
CODE 93 - DISABLE
CODE 128 - ENABLE
CODE 128 - DISABLE
CODE 128 ISBT - ENABLE
CODE 128 ISBT - DISABLE
CODABAR
CODABAR - ENABLE
CODABAR - DISABLE
INTERLEAVED 2 OF 5
12 OF 5 - ENABLE
12OF5 - DISABLE
INDUSTRIAL 2 OF 5
ID2OF5- ENABLE
ID2OF5 - DISABLE
12
Symbologies On/Off—2
MSI/PLESSEY
MSI - ENABLE
MSI - DISABLE
UPC/EAN
UPC—A ENABLE
UPC—A DISABLE
UPC—E ENABLE
UPC—E DISABLE
EAN—13 ENABLE
EAN—13 DISABLE
EAN—8 ENABLE
EAN—8 DISABLE
Symbologies Set Up—1
CODE 11
CODE 11 ID CHARACTER-‘m’
CODE 11 ID CHARACTER‘z’
13
CODE 11 LASER/CCD REDUNDANCY - ENABLE
CODE 11 LASER/CCD REDUNDANCY - DISABLE
CODE 39
CODE 39 SS CHAR - NONE
CODE 39 SS CHAR’+’
CODE 39 SEND STAR/STOP CHARS ENABLE
CODE 39 SEND START/STOP CHARS DISABLE
CODE 39 ID CHARACTER ‘a’
CODE 39 ID CHARACTER‘z’
CODE 39 LASER/CCD REDUNDANCY ENABLE
CODE 39 LASER/CCD REDUNDANCY DISABLE
Symbologies Set Up—2
CODE 93
CODE 93 ID CHARACTER ‘h’
CODE 93 ID CHARACTER‘z’
CODE 93 LASER/CCD REDUNDANCY-ENABLE
CODE 93 LASER/CCD REDUNDANCY-DISABLE
14
CODE 128
CODE 128 ID CHARACTER ‘g’
CODE 128 ID CHARACTER‘z’
CODE 128 LASER/CCD REDUNDANCY-ENABLE
CODE 128 LASER/CCD REDUNDANCY- DISABLE
CODABAR
CODABAR SEND START/STOP CHARS-ENABLE
CODABAR SEND START/STOP CHARS-DISABLE
CODABAR WIDE GAPS ALLOWED-ENABLE
CODABAR WIDE GAPS ALLOWED- DISABLE
Symbologies Set Up—3
CODABAR
CODABAR ID CHARACTER-k
CODABAR LASER/CCD REDUNDANCY-ENABLE
CODABAR ID CHARABTER-z
CODABAR LASER/CCD REDUNDANCY-DISABLE
15
Interleaved 2 of 5
12OF5 ID CHARACTER-i
12OF5 ID CHARACTER-z
12OF5 LASER/CCD REDUNDANCY-ENABLE
CODABAR LASER/CCD REDUNDANCY-DISABLE
Industrial 2 of 5
ID2OF5 ID CHARACTER-j
ID2OF5 CHARACTER-z
ID2OF5LASER/CCD REDUNDANCY-ENABLE
ID2OF5LASER/CCD REDUNDANCY-DISABLE
Symbologies Set Up—4
MSI/PLESSEY
MSI ISBN ID CHARACTER-f
0053f
MSI LASER/CCD REDUNDANCY-ENABLE
MSI ISBN ID CHARACTER-z
0053z
MSI LASER/CCD REDUNDANCY-DISABLE
16
UPC/EAN
EXPAND UPC-E TO UPC-A ENABLE
EXPAND UPC-E TO UPC-A DISABLE
EXPAND UPC-A TO EAN-13 ENABLE
EXPAND UPC-ATO EAN-13 DISABLE
CONVERT EAN-13 TO ISBN ENABLE
CONVERT EAN-13 TO ISBN DISABLE
UPC-A ID CHARACTER-b
UPC-A ID CHARACTER-z
Symbologies Set Up—5
UPC/EAN
UPC-E ID CHARACTER-c
UPC-E ID CHARACTER-z
EAN-13 ID CHARACTER-e
EAN-13 ID CHARACTER-z
17
EAN-8 ID CHARACTER -d
EAN-8 ID CHARACTER -z
ISBN ID CHARACTER -f
ISBN ID CHARACTER -z
UPC/EAN SUPPLEMENTS-DISABLE
UPC/EAN SUPPLEMENTS-2DIGIT ONLY
UPC/EAN SUPPLEMENTS-5DIGIT ONLY
UPC/EAN SUPPLEMENTS-2DIGIT ONLY
Symbologies Set Up—6
UPC/EAN
UPC/EAN LASER/CCD REDUNDANCY ENABLE
UPC/EAN LASER/CCD REDUNDANCY DISABLE
EDIT SETUP BAR CODES
EDIT #1 – STRIP 1 LEADING CHARACTER ON ALL BAR
CODES THAT START WITH ‘12345’
18
EDIT #1- OFF
EDIT #2 – STRIP 1 TRAILING CHARACTER
EDIT #2 - OFF
EDIT #1 – FILTER LEADING SPACES
EDIT #1 - OFF
EDIT #1 – FILTER TRAILING SPACES
EDIT #1 - OFF
EDIT – FILTER CHARACTERS
EDIT-DISABLE FILTERING OF ALL CHARS
EDIT-INSERT LEADING ZERO
EDIT- DISABLE INSERT LEADING ZERO
MACRO/SPECIAL KEYS SETUP BAR CODES
MACRO #1-FIND’1’AND PRPLACE WITH’ONE’
MACRO #1-DISABLED
MACRO #2-FIND‘2’AND
REPLACE WITH ‘TWO’FOR CODE 39 ONLY
MACRO #2-DISABLED
19
MACRO-FIND’0’AND REPLACE WITH’A’
SPECIAL KEY-MAP F3 TO‘0’
SPECIAL KEY-MAP KEYPAD ENTER TO ‘2’
MACRO-FIND’0’AND REPLACE WITH’A’-DISABLE
SPECIAL KEY-DISABLE F3 KEY MAPPING
SPECIAL KEY-DISABLE KEYPAD ENTER MAPPING
TERMINATION STRING SETUP BAR CODES
STRING#1-TERMINATION CHAR-CR
STRING#1-TERMINATION-LF
STRING#1-TERMINATION CR+LF
STRING#1-DISABLED
STRING#2-CODE128TERMINA TION CHAR-CR
STRING#2-CODE 128TERMINATION CHAR-LF
STRING#2-CODE128 TERMINATION CHAR-CR+LF
STRING#2-CODE 128TERMINATION CHAR-LF
20
STRING-CODE 39 TERMINATION CHAR-TAB
STRING-CODE39 TERMINATION CHAR-TAB-REMOVED
STRING- ALL CODES PREAMBLE-STX
STRING-ALL CODES POSTAMBLE-ETX
21
ACTION
DESCRIPTION
A
DISPLAY DECODER FIRMWARE VERSION NUMBER
B
RESET DECODER OR OPTION TO DEFAULT SETTINGS
C
ENTER KEYBOARD PROGRAMMING MODE-ACTIVE ONLY
WHEN IN KEYBOARD WEDGE MODE
OPTION NUMBERS AND DESCRIPTIONS
F1 INTERFACE OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
000
KEYBOARD WEDGE TRANSMIT
SPEED
BYTE
0
99
0- FASTEST
001
SPECIAL CHAR TRANSMIT
DELAY
BYIE
0
255
50- (MSECS)
002
KEYBOARD WEDGE MODE
4BIT
0
6
0- (AUTODETECT)
003
AUTO-DETECT CAP LOCK
BIT
0
1
0- ( AUTODETECT)
004
NUMERIC KEY OUTPUT MODE
BIT
0
1
0- (MAIN KBD KEYS)
005
KEYBOARD COUNTRY
BYIE
0
25
0-(USA)
006
DECODER OUTPUT MODE
4BIT
0
2
0- (KEYBRD WEDGE)
007
SERIAL BAUD RATE
4BIT
0
7
5- (9600)
008
SERIAL DATA BITS
BIT
0
1
1- 8 BITS
009
SERIAL STOP BITS
BIT
0
1
0- 1STOP BIT
010
SERIAL PARITY
4BIT
0
4
0-NONE
011
SERIAL INTERCHARACTER
DELAY
BYIE
0
50
0- (MSECS)
012
SERIAL HANDSHAKE MODE
4BIT
0
3
0-NONE
013
SERIAL HANDSHAKE TIMEOUT
BYIE
0
100
20- (1SECONDS)
014
CODE 128 WAND EMULATION
4BIT
0
1
0- (DISABLED)
015
WAND EMULATION OUTPUT
SPEED
4BIT
0
3
2- (SLOW)
016
WAND EMULATION BAR MODE
BIT
0
1
1- (BAR =1)
017
RESERVED
018
RESERVED
019
RESERVED
020
RESERVED
021
PROGRAM MODE LOCKOUT
BIT
0
1
0- BAR=1
22
F2 Code39 OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
022
CODE 39 DECODER
BIT
0
1
1- ENABLED
023
FULL ASCII
BIT
0
1
0- DISABLED
024
MODULO 43 CHECK
DIGIT
BIT
0
1
0- DISABLED
025
SEND CHECK DIGIT
BIT
0
1
0- DISABLED
026
APPEND MODE
BIT
0
1
0- DISABLED
027
SECONDARY START/STOP
CHARS
4BIT
0
1
0- DISABLED
028
SEND START/STOP
CHARS
BIT
0
1
0- DISABLED
029
MAXIMUM LENGTH
BYTE
0
49
49
030
MINIMUM LENGTH
BYTE
0
49
0
031
ID CHARACTER
CHAR
1
1
‘a’
032
CONTROL CHARACTER
OVERRIDE
BIT
0
1
0- DISABLED
033
LASER/CCD
REDUNDANCY
BIT
0
1
0- DISABLED
F2 UPC/EAN OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
034
UPC-A DECODER
BIT
0
1
1- ENABLED
035
UPC-E DECODER
BIT
0
1
1- ENABLED
036
EAN/JAN-13 DECODER
BIT
0
1
1- ENABLED
037
EAN/JAN-8 DECODER
BIT
0
1
1- ENABLED
038
EXPAND UPC-E TO UPC-A
BIT
0
1
0- DISABLED
039
EXPAND UPC-E TO EAN-13
BIT
0
1
0- DISABLED
040
SEND UPC-A NUMBER
SYSTEM CHAR
BIT
0
1
1-ENABLED
041
SEND UPC-E NUMBER
SYSTEM CHAR
BIT
0
1
1- ENABLED
042
SEND UPC-A CHECK DIGIT
BIT
0
1
1- ENABLED
043
SEND UPC-E CHECK DIGIT
BIT
0
1
1- ENABLED
044
SEND EAN-13 COUNTRY CODE
BIT
0
1
1- ENABLED
045
SEND EAN-8 COUNTRY CODE
BIT
0
1
1- ENABLED
046
SEND EAN-13 CHECK DIGIT
BIT
0
1
1- ENABLED
047
SEND EAN-8 CHECK DIGIT
BIT
0
1
1- ENABLED
048
CONVERT EAN-13 TO ISBN
BIT
0
1
0- DISABLED
049
UPC-A ID CHARACTER
CHAR
1
1
‘b’
050
UPC-E ID CHARACTER
CHAR
1
1
‘c’
051
EAN-13 ID CHARACTER
CHAR
1
1
‘e’
052
EAN-8 ID CHARACTER
CHAR
1
1
‘d’
053
ISBN ID CHARACTER
CHAR
1
1
‘f’
054
LASER/CCD REDUNDANCY
BIT
0
1
0- DISABLED
23
F2 UPC/EAN SUPPLEMENTS OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
055
UPC/EAN SUPPLEMENTS
DECODER
2BIT
0
3
0- DISABLED
056
UPC-A SUPPLEMENTS
2BIT
0
2
1- OPTIONAL
057
UPC-E SUPPLEMENTS
2BIT
0
2
1- OPTIONAL
058
EAN-13 SUPPLEMENTS
2BIT
0
2
1- OPTIONAL
059
EAN-8 SUPPLEMENTS
2BIT
0
2
1- OPTIONAL
060
ISBN SUPPLEMENTS
2BIT
0
2
1- OPTIONAL
061
SUPPLEMENTS SEPARATOR
STRING
0
9
NONE
TYPE
MIN
MAX
DEFAULT
F2 CODE-93 OPTION
NUMBER
DESCRIPTION
062
CODE 93 DECODER
BIT
0
1
1- ENABLED
063
APPEND MODE
BIT
0
1
0- DISABLED
064
MAXIMUM LENGTH
BYTE
0
81
81
065
MINIMUM LENGTH
BYTE
0
81
0
066
ID CHARACTER
CHAR
1
1
‘h’
067
CONTROL
OVERRIDE
BIT
0
1
0- DISABLED
068
LASER/CCD REDUNDANCY
BIT
0
1
0- DISABLED
CHARACTER
F2 CODE 128 OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
069
CODE 128 DECODER
BIT
0
1
1- ENABLED
070
ISBT DECODER
BIT
0
1
0- DISABLED
071
ISBTCONCATENATION PAIRS
STRING
0
4
NONE
072
ISBTPAIR #1
STRING
0
4
NONE
073
ISBTPAIR #2
STRING
0
4
NONE
074
ISBTPAIR #3
STRING
0
4
NONE
075
ISBTPAIR #4
STRING
0
4
NONE
076
ISBTPAIR #5
STRING
0
4
NONE
077
ISBTPAIR #6
STRING
0
4
NONE
078
FIELD SEPARATOR CHARACTER
CHAR
1
1
01DH(ASCII
‘GS’)
079
MAXIMUM LENGTH
BYTE
0
164
164
080
MINIMUM LENGTH
BYTE
0
164
0
081
ID CHARACCTER
CHAR
1
1
‘g’
082
UCC/EAN OUTPUT PREFIX
SRTING
0
3
NONE
083
CONTROL CHARACTER
OVERRIDE
BIT
0
1
0- DISABLED
084
LASER/CCD REDUNDANCY
BIT
0
1
0- DISABLED
24
F2 CODABAR OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
085
CODABAR DECODER
BYTE
0
1
1- ENBALED
086
SEND START/STOP CHARACTERS
2BIT
0
3
0- DISABLED
087
CHECK DIGIT
2BIT
0
2
0- DISABLED
088
SEND CHECK DIGIT
BIT
0
1
0- DISABLED
089
CLSI FORMATTING
BIT
0
1
0- DISABLED
090
WIDE INTERCHARACTER GAPS
BIT
0
1
0- DISABLED
091
ABD CONCATENATION
BIT
0
1
0- DISABLED
092
MAXIMUM LENGTH
BYTE
1
62
62
093
MINIMUM LENGTH
BYTE
1
62
1
094
ID CHARACTER
CHAR
1
1
‘k’
095
LASER/CCD REDUNDANCY
BIT
0
1
0- DISABLED
F2 INTERLEAVED 2 OF 5 OPTION
NUMBER
NUMBER
TYPE
MIN
MAX
DEFAULT
096
12OF5 DECODER
BIT
0
1
1- ENABLED
097
CHECK DIGIT
BIT
0
2
0- DISABLED
098
SEND CHECK DIGIT
BIT
0
1
0- DISABLED
099
MAXIMUM LENGTH
BYTE
0
100
100
100
MINIMUM LENGTH
BYTE
0
100
0
101
FIXED LENGTH
BIT
0
1
0- DISABLED
102
FIXED LENGTH SIZE # 1
BYTE
2
100
6
103
FIXED LENGTH SIZE # 2
BYTE
2
100
14
104
ID CHARACTER
CHAR
1
1
‘i’
105
LASER/CCD REDUNDANCY
BIT
0
1
1- ENABLED
F2 INDUSTRIAL 2 OF 5 OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
106
INDUSTRILA2OF5
DECODER
BIT
0
1
1- ENABLED
107
START/STOP
CHARACTERS
BIT
0
1
0- 3BAR
START/STOP
108
MAXIMUM LENGTH
BYTE
2
49
49
109
MINIMUM LENGTH
BYTE
2
49
2
110
FIXED LENGTH
BIT
0
1
0- DISABLED
111
FIXED LENGTH SIZE#1
BYTE
2
49
6
112
FIXED LENGTH SIZE#2
BYTE
2
49
10
113
ID CHARACTER
CHAR
1
1
‘i’
114
LASER/CCD
REDUNDANCY
BIT
0
1
1- ENABLED
25
F2 MSI OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
115
MSI DECODER
BIT
0
1
1- ENABLED
116
CHECK DIGITS
2BIT
0
2
0-MOD 10
117
SEND CHECK DIGITS
2BIT
0
2
0- DISABLED
118
ISBN DECODER
BIT
0
1
0- DISABLED
119
MAXIMUM LENGTH
BYTE
3
63
63
120
MINIMUM LENGTH
BYTE
3
63
3
121
FIXED LENGTH
BIT
0
3
0- DISABLED
122
FIXED LENGTH SIZE # 1
BYTE
3
63
6
123
FIXED LENGTH SIZE # 2
BYTE
3
63
14
124
ID CHARACTER
CHAR
1
1
‘I’
053
ISBN ID CHARACTER
125
LASER/CCD REDUNDANCY
USING THE SAME ISBN ID TO UPC/EAN
BIT
0
1
1- ENABLED
F2 CODE 11 OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
126
CODE 11 DECODER
BIT
0
1
1- ENABLED
127
CHECK DIGIT
BIT
0
1
0- MOD 11
128
SEND CHECK
DIGITS
2BIT
0
2
0- DISABLED
129
MAXIMUM LENGTH
BYTE
2
83
83
130
MINIMUM LENGTH
BYTE
2
83
2
131
ID CHARACTER
CHAR
1
1
‘M’
132
LASER/CCD
REDUNDANCY
BIT
0
1
0- DISABLED
F2 LASER/CCD OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
133
OPERATING MODE
4BIT
0
5
0- SINGLE
SCAN
134
TIMEOUT
BYTE
1
12
2-(2
SECONDS)
135
PULSE RATE
4BIT
2
7
3
136
PULSE TO
CONTINUOUS
THRESHOLD
BYTE
0
255
0- OFF
137
DUPLICATE
READ DELAY
BYTE
0
127
5-(5
SECONDS)
26
F2 OTHER DECODING OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
138
QUIET ZONES
(MARGINS)
BIT
0
1
1-LARGE
139
REVERSE
IMAGE
DECODING
BIT
0
1
0-DISABLED
140
SEND BAR
CODE TYPE ID
BIT
0
1
0-DISABLED
F7 DEFINE THE BUZZER AND LED OPTION
NUMBER
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
141
POWER UP BEEP
BIT
0
1
1-ENABLED
142
GOOD READ BEEP
TONE 4BIT
4BIT
0
5
2-MEDIUM
143
GOOD READ BEEP
DURATION
BYTE
0
2
1-MEDIUM
144
NO READ LED DELAY
BYTE
0
65
20-(2
SECONDS)
145
LED POWER SAVE
MODEBIT
BIT
0
1
0-DISABLED
F4 DEFINE THE MACRD KEY MAPPING OPTIONS – MAP THE KEY TO A
CHARACTER THAT CAN BE PRODUCED IN A BAR CODE SO THAT WHEN THE
BAR CODE IS SCANNED-THESPECIAL KEY IS OUTPUT
NUMBEIR
DESCRIPTION
160
F1 MACRO
161
OPTION
TYPE
MIN
MAX
DEFAULT
BYTE
0
255
255-OFF
F2 MACRO
BYTE
0
255
255- OFF
162
F3 MACRO
BYTE
0
255
255- OFF
163
F4 MACRO
BYTE
0
255
255- OFF
164
F5 MACRO
BYTE
0
255
255- OFF
165
F6 MACRO
BYTE
0
255
255- OFF
166
F7 MACRO
BYTE
0
255
255- OFF
167
F8 MACRO
BYTE
0
255
255- OFF
168
F9 MACRO
BYTE
0
255
255- OFF
169
F10 MACRO
BYTE
0
255
255- OFF
170
F11 MACRO
BYTE
0
255
255- OFF
171
F12 MACRO
BYTE
0
255
255- OFF
172
INSERT KEY MACRO
BYTE
0
255
255- OFF
173
DELETE KEY MACRO
BYTE
0
255
255- OFF
174
HONG KEY MACRO
BYTE
0
255
255- OFF
175
END KEY MACRO
BYTE
0
255
255- OFF
27
176
PAGE UP KEY MACRO
BYTE
0
255
255- OFF
177
PAGE DOWN KEY MACRO
BYTE
0
255
255- OFF
178
LEFT ARROW KEY MACRO
BYTE
0
255
255- OFF
179
RIGHT ARROW KEY MACRO
BYTE
0
255
255- OFF
180
UP ARROW KEY MACRO
BYTE
0
255
255- OFF
181
DOWN ARROW KEY MACRO
BYTE
0
255
255- OFF
182
KEY PAD ENTER KEY MACRO
BYTE
0
255
255- OFF
183
ALT KEY MAKE MACRO
BYTE
0
255
255- OFF
184
ALT KEY BREAK MACRO
BYTE
0
255
255- OFF
185
CTRL KEY MAKE MACRO BYTE
BYTE
0
255
255- OFF
186
CTRL KEY BREAK MACRO
BYTE
0
255
255- OFF
187
SHIFT KEY MAKE MACRO
BYTE
0
255
255- OFF
188
SHIFT KEY BREAK MACRO
BYTE
0
255
255- OFF
F3 EDIT SETUP BAR CODE OPTION
OPTION
NUMBER
DESCRIPTION
TYPE
MIN
200
EDIT OPTION
SEE BELOW
MAX
DEFAULT
DISBLED
EDIT BAR CODE DATA FORMAT:
2DIGIT EDIT # (00- 10)
00—WILL AUTOMATICALLY SELECT THE FIRST AVAILABLE
EDIT#
2DIGIT EDIT TYPE(1- 9)
00- OFF
01- STRIP LEADING
CHARACTERS
02- STRIP TRAILING
CHARACTERS
03- FILTER LEADING
CHARACTERS
04- FILTER
TRAILING
CHARACTERS
05- FILTER
CHARACTERS
06- INSERT LEADING
CHARACTER
07- INSERT
TRAILING
CHARACTER
08- CONVERT TO
UPPERCASE
09- CONVERT TO
LOWERCASE
2DIGIT ACTIVE FOR TYPE
(00- 14)
28
00- ALL BAR CODE
TYPES
01- ALL BAR CODE
TYPE ALWAYS
02- CODE 39
03- UPC- A
04- UPC- E
05- EAN- 13
06- EAN- 8
07- ISBN
08- CODE 128
09- I 2OF5
10- CODABAR
11- CODE93
12- MSI
13- CODE11
14- INDUSTRIAL
2OF5
2DIGIT ACTIVE FOR SIZE(00- 99)
3DIGIT BYTE 1 VALUE
3DIGIT BYTE 2 VALUE
3DIGIT BYTE 3 VALUE
3DIGIT CONTAINS OFFSET
000- 255
000=START CHARACTER+0
255=END CHARACTER-0
5 CHARACTER CONTAINS STRING- UP TO 5 CHARS
F4 MACRO SETUP BAR CODE OPTION
NUMBER
DESCRIPTION
TYPE
201
MACRO OPTION
SEE BELOW
MIN
MAX
DEFAULT
MACRO BAR CODE
DATA FORMAT
2DIGIT MACTRO#
(00- 10)
00-WILL AUTOMATICALLY SELECT THE FIRST
2
DIGIT ACTIVE
FOR TYPE(00- 15)
00-NONE
01- ALL BAR CDOE TYPE
02- ALL BAR CODE TYPES
ALWAYS
03- CODE 39
04- UPC- A
05- UPC- E
06- EAN- 13
07- EAN- 8
29
08- ISBN
09- CODE 128
10-12OF5
11- CODABAR
12- CODE- 93
13-MSI
14- CODE 11
15- INDUSTRIAL 2OF5
F5 STRING SETUP BAR CODE OPTION
NUMBER
202
DESCRIPTION
TYPE
MIN
MAX
DEFAULT
$0D(CR)
STRING OPTION
STRING BAR CODE DATA FORMAT
2 DIGIT STRING #(00- 10)
00- WILL AUTOMATICALLY
SELECT THE FIRST
1 DIGIT STRING TYPE(0- 3)
0- OFF
1- TERMINATION
2- PREAMBLE
3- POSTAMBLE
2 DIGIT ACTIVE FOR TYPE(00- 14)
00- ALL BAR CODE
TYPES
01- ALL BAR CODE
TYPES ALWAYS
02- CODE 39
03- UPC- A
04- UPC- E
05- EAN- 13
06- EAN- 8
07- ISBN
08- CODE 128
09- 12OF5
10- CODABAR
11- CODE 93
12- MSI
13- CODE 11
30
14-INDUSTRIAL 2 OF 5
1 DIGIT SCAN DIRECTION(0- 2)
0-ANY DIRECTION SCAN
1- FORWARD SCAN
2 - REVERSE SCAN
30 CHARACTER STRING TEXT- UP TO 30
CHARACTERS
31
32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising