technical data sheet xlerator hand dryer

technical data sheet xlerator hand dryer
TECHNICAL DATA SHEET
XLERATOR HAND DRYER
®
MODELS: XL - BW W GR
C
SB SI SP OPTIONS: -1.1N (Noise Reduction Nozzle) -H (HEPA Filter) -VOLTAGE (See Chart)
PERFORMANCE
DRY TIME: 8 SECONDS*
ENERGY PER USE: 3.7 Wh*
Wattage: 1490 Watts (Heat On), 425 Watts (Heat Off)
er Prod
en
CE
t
uc
RoHS
Gre
Certifications:
R TIFIE D
CONSTRUCTION
A. A
ll covers will be fastened to a base plate by two chrome plated tamper-proof bolts.
Cover shall be one of the following:
Die-cast zinc alloy - One-piece, heavy-duty, rib‑reinforced, lightweight,
unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or
finished with chip-proof, electrostatically applied epoxy paint.
Bulk Molding Compound (BMC) – White reinforced thermoset resin.
Stainless Steel – with a brushed finish.
Special Image – Digital image applied to die-cast or stainless steel covers using
patented Kolorfusion Sublimation Decoration process.
XL-BW
White Thermoset Resin (BMC)
B. B
ase plate shall be equipped with (3) 7/8" (22 mm) diameter holes, the bottom one is
suitable for use with surface conduit.
XL-W
XL-GR
XL-SP **
White Epoxy
Painted
Graphite Textured
Painted
Custom Special
Paint
C. A
ll internal parts shall be coated according to Underwriters' Laboratories, Inc.
requirements.
D. Entire mechanism shall be internally grounded.
E. Options
HEPA Filtration System: Filters 99.97% of bacteria at 0.3 microns from the air stream.
1.1 Noise Reduction Nozzle: Lowers decibel level 9 dB by reducing air deflection
noise but increases dry time by approximately 3 seconds.
F. A
ccessories (optional)
Microban® Antimicrobial Wall Guards: 89W (White), 89B (Black), 89S (Stainless)
XChanger Paper Towel Retrofit Kit: 40550, 40551 (ADA Height)
ADA Recess Kit: 40502
XL-SI***
XL-C
XL-SB
Custom Special
Image
Chrome
Plated
Brushed Stainless
Steel
UL Environment published the first global Product Category Rules (PCR) for
Hand Dryers and Excel is proud to have initiated and chaired the project.
The PCR created evaluation methods through industry consensus that
compare products' environmental impact and performance. Third Party
testing results then enable specifiers and buyers to make a true apples-toapples comparison of products and make more informed decisions.
*
Dry time and energy use testing performed by SGS International on standard XLERATOR Hand Dryer with
0.8" nozzle to 0.25g or less of residual moisture, pursuant to the UL Environment Global Product Category
Rules (PCR) for Hand Dryers.
** Special Paint powder-coated covers are available in many colors and textures.
*** Exclusive digital image technology allows for the addition of company, school or team logos with any color,
design or a 'green message'.
FOR ARCHITECT/ENGINEER APPROVAL
Job Name
Date
Model Specified
Quantity
MECHANISM
A. M
otor shall be a thermally protected, series commutated, through-flow discharge
vacuum motor/blower (5/8 hp / 20,000 rpm) which provides air velocity of up to
19,000 LFM (linear feet per minute) at the air outlet and 16,000 LFM at the hands (4
inches [102 mm] below air outlet). Includes a washable metal mesh filter for more
reliable performance.
B. Heating element (970 w) is constructed of Nichrome wire and mounted inside the blower
housing, thereby being vandal resistant. It shall be protected by an automatic resetting
thermostat, which shall open whenever air flow is cut off and shall close when flow of
air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C)
ambient room temperature at the hands (4 inches [102 mm] below air outlet).
C. Control assembly is activated by an infrared optical sensor located next to the air outlet.
The dryer shall operate as long as hands are under the air outlet. Control includes a speed
and sound control mechanism, adjustable heat control with High, Medium, Low and Off
settings and a filter sensor which is activated should the filter become clogged. There is
a 35-second lockout feature if hands are not removed. Sensor equipped with externally
visible Red LED light that flashes error codes to assist in troubleshooting.
LIMITED WARRANTY
Variations Specified
The dryer shall be guaranteed to be free from defects for a period of five (5) years.
Warranty shall include labor performed at factory as well as the repair or exchange of
defective parts, at manufacturer's option.
Customer/Wholesaler
QUANTITY RECOMMENDATIONS
One dryer for every two washbasins is sufficient for most applications. If restroom traffic is
unusually heavy, we suggest one dryer per washbasin in small installations and two dryers for
every three washbasins in larger installations. When a 54" washfountain is used, we suggest
four to five dryers.
Contractor
Architect
EXCEL DRYER, Inc.
E a s t L o n g m e a d o w, M A Phone 1.800.255.9235
Fax 1.413.525.2853
s a l e s @ e x c e l d r y e r. c o m
w w w . e x c e l d r y e r. c o m
SEPT
2016
16XLT0002
TECHNICAL DATA SHEET
XLERATOR HAND DRYER
®
MODELS: XL - BW W GR
C
SB SI SP OPTIONS: -1.1N (Noise Reduction Nozzle) -H (HEPA Filter) -VOLTAGE (See Chart)
SIDE VIEW
FRONT VIEW FACING WALL
DIMENSIONS
Width 11 3/4" (298 mm)
Height 12 11/16" (322 mm)
Depth 6 11/16" (170 mm)
ACTIVATION
MOUNTING
Automatic Sensor Operated
Surface Mounted
OPTIONAL ADA-COMPLIANT RECESS KIT
WEIGHT
XL-BW: 15 lbs. (6.8 kgs.)
XL-SB: 16 lbs. (7.26 kgs.)
XL-W, GR, C, SI, SP: 17 lbs. (7.71 kgs.)
ELECTRICAL
VOLTS
AMPS
WATTS
NO HEAT AMPS
NO HEAT WATTS
HERTZ
460-530W
50/60 Hz
110-120V
11.3-12.2A
1240-1450W
4.3-4.5A
208-277V
5.6-6.2A
1160-1490W
2.0-2.2A
425-500W
50/60 Hz
1410W
2.2A
500W
50 Hz
230V
6.1A
Part # 40502
SUGGESTED MOUNTING HEIGHTS
DIMENSIONS
from floor to bottom of dryer:
Width 16 3 /8" (416 mm)
Men
45" (114 cm)
Women
43" (109 cm)
WEIGHT
Teenagers
41" (104 cm)
11 lbs. (4.99 kgs.)
Small Children
35" (89 cm)
Accessible
37" (94 cm)
EXCEL DRYER, Inc.
E a s t L o n g m e a d o w, M A Phone 1.800.255.9235
Fax 1.413.525.2853
Height 26" (660 mm)
Depth 3 3 /8" (86 mm)
Bottom of recessed wall box should be 10" (254 mm) below suggested
mounting height for dryer.
s a l e s @ e x c e l d r y e r. c o m
w w w . e x c e l d r y e r. c o m
SEPT
2016
16XLT0002
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising