ICOM IC-M1V - M/s. Manasrekha Enterprises

ICOM IC-M1V - M/s. Manasrekha Enterprises
The amazing evolution of the ‘706’ series…
The IC-706MKIIG carries on the ‘706’ series tradition of base station performance and features in
a mobile reg-sized package. Building on this legacy, frequency coverage is expanded to the 70
cm band and output power is increased for the 2 m band. A long list of enhancements, both to
usability and performance, as well as added features and functions have produced the latest in
the evolution of the ‘706’ series.
HF to 70 cm band coverage
Operating frequency rage has been expanded to the 70 cm band. Of course, all mode operation (SSB, CW,
RTTY, AM and FM) is possible and a full 100W of output power is available for HF and 6 m operation; 50 W
for 2 m and 20 W for 70 cm operation.
High stability transmitter
MOS-FET power amplifiers are employed at the PA unit for all HF, 6 m, 2 m and 70 cm bands. And, a one
piece aluminum, diecast chassis with a large cooling fan is employed. This combination provides stable,
high quality output with low IMD and low spurious emissions even during full duty cycle and extended
operation.
Illuminated keys and switches
Backlighting of keys and switches is a great help during nighttime operation – the intensity is even
adjustable!
Tone squelch standard
Tone squelch operation is available in FM mode for basic signaling and quiet standby. Tone frequencies can
be set independently for tone squelch (Tx/Rx) and repeater tones, and a range of 50 frequencies is
available. A tone scan function is available to search for a repeater’s access tone quickly and easily.
DSP features
DSP capabilities are available*. These include noise reduction and auto notch functions. Superior receive
quality in your shack, vehicle or during DX’peditions.
*AF DSP; UT-106 DSP UNIT required for some versions.
Compact with detachable panel*¹
The IC-706MKIIG is very compact at 167 (W) x 58 (H) x 200 (D) mm*² and weighs a mere 2.5 kg*³, making
it ideal for DX’peditions, etc. A detachable front panel allows easy installation in your shack or in a wide
variety of mobile applications.
*¹ An optional separation cable is required; *² 6 9/16 (W) x 2 9/32 (H) x 7 7/8 (D) in; *³5.5 lb.
Automatic repeater function*
An automatic repeater function is available and repeater frequencies can be programmed via a special
operation. This eliminates the need for repeater settings for 6 m, 2 m or 70 cm repeater operation.
*Standard for USA version; programming required for others.
Optional high frequency stability
±0.5 ppm of high frequency stability is provided when an optional CR-282 HIGH STABILITY CRYSTAL
UNIT is installed.
Simple operation
The individual band change key, a sub dial and quick band change capability provide simple operation.
The individual band change key allows quick and easy QSY, the sub dial enhances mobile and memory
operation, and the quick band change capability selects pre-set frequency bands with the last-used
frequency and mode. Also, each band can store preamplifier/attenuator and tuner on/off settings.
Simple band scope function
This function sweeps ±14 steps from the displayed frequency and plots received signal strength on the
function display. This function is useful not only for checking HF band conditions, but also seeking vacant
frequencies during VHF or UHF FM operation.
Narrow FM capability
For FM operation on the 10 m or the 2 m (where narrow FM is required) bands, the IC-706MKIIG has
narrow FM capability that allows you to take advantage of this operating mode.
107 memory channels with alphanumeric name capability
99 channels can memorize both transmit and receive frequencies separately; 6 channels are for
programmed scan edges; and 2 channels are for call memory for the 2 m and 70 cm bands.
And, up to 9-
character alphanumeric names can be programmed into each memory channel.
And more…
►Up to 3 selectable passband widths
►Built-in electronic keyer
►CW reserve function
►Adjustable CW pitch ►Full break-in (QSK)
►IF shift interference rejection
►Superior audio characteristics
►Continuously adjustable RF output power
►AF speech compressor
►RF gain control
►Noise blanker
►Adjustable SSB carrier point
►Receiver protection circuit
►Optional voice synthesizer
►4 scan types
►RIT ►Selectable AGC time constant
►CI-V capability ►Digital, multi-function S/RF meter
►Optional antenna tuners (control circuit built-in)
►VOX
SPECIFICATIONS
General
Frequency coverage
Receive
0.300 – 199.999 MHz*
400 – 470.000 MHz*
Transmit
1.8 – 1.999 MHz*
3.5 – 3.999 MHz*
7.0 – 7.300 MHz
10.1 – 10.150 MHz
14.0 – 14.350 MHz
18.068 – 18.168 MHz
21.0 – 21.450 MHz
24.89 – 24.990 MHz
28.0 – 29.700 MHz
50.0 – 54.000 MHz*
144.0 – 148.000 MHz*
430.0 – 450.000 MHz*
*Varies according to version.
Mode
USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
No. of memory Ch.
107 (99 regular, 6 scan edges, 2 call channels)
Antenna connector
SO-239X2 (for HF/50 MHz and 144/430 MHz)/50Ω
Power supply requirement
(negative ground)
Frequency stability
13.8 V ± 15% (negative ground)
Less than ±7 ppm from 1 min. to 60 min. after power on. After that
rate of stability less than ±1 ppm/hr. at ±
2 5 °C (+77°F). Temperature
Current drain
fluctuations 0°C to +50°C (+32°F to + 122°F) less than ±
5 ppm.
Transmit
Max. power
20 A
Receive
Usable temperature range
Standby
1.8 A
Max. audio
2.0 A
-10°C to +60°C; -14°F to + 140°F
Dimensions
(projections not included)
Weight (approx.)
167 (W) x 58 (H) x 200 (D) mm; 6 9/16 (W) x 2 9/32 (H) x 7 7/8 (D) in
CI-V connector
2-conductor 3.5 (d) mm (1/8”)
ACC connector
13-pin
2.45 kg (5 lb 6 oz)
Transmitter
Output power
Modulation system
Spurious emissions
Carrier suppression
Unwanted sideband
Microphone connector
KEY connector
RTTY connector
SSB/CW/RTTY/FM
HF/50 MHz
5 - 100 W
144 MHz
5 - 50 W
440 MHz
2 - 20 W
SSB
Balanced modulation
AM
Low level modulation
FM
Variable reactance modulation
-50dB typ. (HF bands) -60 dB (other bands)
More than 40 dB
More than 50 dB
8-pin modular jack (600 Ω)
3-conductor 6.35 (d) mm (1/4”)
3-conductor 3.5 (d) mm (1/8”)
AM
2 - 40 W
2 - 20 W
2-8W
Receiver
Receive system
Intermediate frequencies
(Unit: MHz/ *FM only)
SSB/CW/AM/WFM
FM
SSB/AM-N/FM
CW
RTTY
AM/FM-N
WFM
Receive sensitivity
1.8–28 MHz
28-29.7 MHz
50 MHz band
76-108 MHz
Double superheterodyne
Triple superheterodyne
1 st
2 nd
69.0115
9.0115
69.0106
9.0106
69.0105
9.0105
69.0100
9.0100
70.7000
10.7000
SSB/CW
-
AM
13 µV
0.15 µV
2.0 µV
0.12 µV
-
1.0 µV
-
FM
0.5 µV
0.25 µV
-
3 rd
0.455*
0.455*
WFM
10.0 µV
Squelch sensitivity (threshold)
Selectivity
(normal setting)
Spurious and image rejection
ratio
Audio output power
RIT variable range
PHONES connector
EXT SP connector
0.11 µV
1.0 µV
0.18 µV
144/440
MHz
SSB
Less than 5.6 µV
FM
Less than 0.3µV
SSB, CW, RTTY
More than 2.4 kHz/ -6 dB
Less than 4.8 kHz/ -60 dB
AM/FM-N
More than 8.0 kHz/ -6 dB
Less than 30 kHz/ -36 dB
FM
More than 12 kHz/ -6 dB
Less than 30 kHz/ -50 dB
HF bands
More than 70 dB
50 MHz
More than 65 dB (except IF through)
144/430 (440) MHz
More than 65 dB
More than 2.0 W (at 13.8 V DC)
±9 .99 kHz
3-conductor 3.5 (d) mm (1/8”)
2-conductor 3.5 (d) mm (1/8”) / 8 Ω
Supplied accessories:
►Hand microphone
►DC power cable
►Spare fuses
►RTTY key plug
►Electric key plug ►ACC cable
OPTIONS
IC-PW1 HF+50 MHz 1kW HF LINEAR AMPLIFIER
Covers all HF and 50 MHz bands, provides clean, stable 1kW output.
Automatic antenna tuner and compact detachable controller are standard. 2
exciter inputs are available. (An optional OPC-599 is required.)
AH-2b ANTENNA ELEMENT
For mobile operation with the AH-4.
All bands between 7-54 MHz can be matched.
AH-4 HF+50 MHz AUTOMATIC ANTENNA TUNER
Covers 3.5-54 MHz with a 7 m (23 ft) or longer wire antenna.
AT-180 HF+50 MHz AUTOMATIC ANTENNA TUNER
Style and size are matched to the IC-706MKIIG
PS-85 DC POWER SUPPLY
Output: 13.8 V DC(20 A max.)
MB-62 MOBILE MOUNTING BRACKET
For mounting the IC-706MKIIG main unit or the AT-180.
MB-63 MOBILE MOUTING BRACKET
For mounting the detached front panel.
MB-65 MOUNTING BASE
For mounting the detached front panel in a vehicle.
The MB-63 is required.
OPC-581/OPC-587 SEPARATION CABLES
Provides separate operation.
OPC-581: 3.5 M (11 ft) OPC-587: 5 M (16 ft)
SM-20 DESKTOP MICROPHONE
High quality desktop microphone.
(An optional OPC-599 is required.)
SM-8 DESKTOP MICROPHONE
Equipped with 2 connection cables.
(An optional OPC-599 is required.)
UT-106 DSP UNIT
Provides AF DSP functions such as noise reduction and auto notch.
Built-in to some versions.
9 HMz FILTERS
Have good shape factor and provide you with better reception.
FL-100
500 Hz/ -6dB (CW/RTTY nar.)
FL-101
250 Hz/ -6dB (CW nar.)
FL-103
2.8 kHz/ -6dB (SSB wide)
FL-223
1.9 kHz/ -6dB (SSB nar.)
FL-232
350 Hz/ -6dB (CW/RTTY nar.)
MB-72 CARRYING HANDLE
Convenient when for DX’deditions, operating in the field, etc.
CR-282 HIGH STABILITY CRYSTAL UNIT
CT-16 SATELLITE INTERFACE UNIT
CT-17 CI-V LEVEL CONVERTER
HM-103 HAND MICROPHONE (same as supplied)
OPC-589 MODULAR 8-PIN CABLE ADAPTER
OPC-598 ACC 13 PIN CABLE FOR AT-180
OPC-599 ACC 13 PIN CABLE ADAPATER
OPC-742 ACC 13 PIN CABLES
SP-7 EXTERNAL SPEAKER
SP-10 EXTERNAL SPEAKER
SP-12 EXTERNAL SPEAKER
UT-102 VOICE SYNTHESIZER UNIT
Icom Australia Pty Ltd (ACN
006 092 575)
290-294 Albert Street, Brunswick, VICTORIA, 3056, AUSTRALIA
Phone: 03 9387 0666 Fax: 03 9387 0022
URL: http://www.icom.net.au
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising